Scribd
Upload
276 views

Programming Software Tools 8000

This software provides programming capabilities for fire alarm panels in Honeywell's System 8000, IQ8Control, FlexES Control, Gateway, and extended supplementary text displays. It is available in 12 languages and requires the field bus interface Part No. 789862.10 for programming. The software allows for start-up, programming, loop diagnosis, and maintenance of FACP 8000 C/M, FACP 8008, IQ8Control C/M, FlexES Control, or ECP 8010 panels running software version V2.20 or higher on Windows 7 or newer PCs with 512 MB RAM and 500 MHz CPU.

Uploaded by

David Lopez
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
276 views

Programming Software Tools 8000

This software provides programming capabilities for fire alarm panels in Honeywell's System 8000, IQ8Control, FlexES Control, Gateway, and extended supplementary text displays. It is available in 12 languages and requires the field bus interface Part No. 789862.10 for programming. The software allows for start-up, programming, loop diagnosis, and maintenance of FACP 8000 C/M, FACP 8008, IQ8Control C/M, FlexES Control, or ECP 8010 panels running software version V2.20 or higher on Windows 7 or newer PCs with 512 MB RAM and 500 MHz CPU.

Uploaded by

David Lopez
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Programming software tools 8000

Part-No.: 789861

Convenient Windows programming software CD for programming the fire alarm panels belonging in Series
System 8000, IQ8Control, FlexES Control, Gateway and extended supplementary text in ¼ VGA display.
Available Languages:
Czech, Danish, English (FM-USA, class 3010), French, German, Hungarian, Italian, Slovakian, Spanish,
Polish, Portuguese, Romanian and Russian.
For programming, the (Part No. 789862.10) field bus interface is required.
Features:
• Start-up
• Programming
System requirements: - FACP 8000 C/M, FACP 8008, IQ8Control C/M, FlexES Control or ECP 8010 as of software
• Loop diagnosis
version V2.20 - PC/Notebook as of Windows 7 or higher - Recommended configuration: 512 MB RAM, 500 MHz
• Maintenance software
CPU - This software is also used for the LCD panels 7851xx

© 2023 Honeywell International Inc.


Subject to change without notice!

Novar GmbH a Honeywell Company Phone: +49 2131 40615 600 www.esser-systems.com
Forumstr. 30 41468 Neuss Faximile: +49 2131 40615 606 [email protected]

Powered by TCPDF (www.tcpdf.org)

You might also like