Bid Number: GEM/2021/B/1780953

Dated: 23-12-2021

Bid Document

Bid Details

Bid End Date/Time 13-01-2022 14:00:00

Bid Opening Date/Time 13-01-2022 14:30:00

Bid Life Cycle (From Publish Date) 90 (Days)

Bid Offer Validity (From End Date) 45 (Days)

Ministry/State Name Ministry Of Petroleum And Natural Gas

Department Name Na

Organisation Name Oil And Natural Gas Corporation Limited

Office Name Cambay Asset

Total Quantity 50

Supply of 50 Nos of Cylindrical Storage Tanks of Capacity

Item Category
45m3 for ONGC Cambay Asset (Q3) ()

Years of Past Experience required 3 Year (s)

MSE Exemption for Years of Experience and

No
Turnover

Startup Exemption for Years of Experience

No
and Turnover

Experience Criteria,Past Performance,Certificate (Requested

in ATC),OEM Authorization Certificate,Additional Doc 1
(Requested in ATC),Additional Doc 2 (Requested in
ATC),Additional Doc 3 (Requested in ATC),Additional Doc 4
(Requested in ATC),Compliance of BoQ specification and
Document required from seller
supporting document
*In case any bidder is seeking exemption from Experience /
Turnover Criteria, the supporting documents to prove his
eligibility for exemption must be uploaded for evaluation by
the buyer

Past Performance 20 %

Bid to RA enabled No

Time allowed for Technical Clarifications

4 Days
during technical evaluation

Inspection Required (By Empanelled

Inspection Authority / Agencies pre- Yes
registered with GeM)

Inspection to be carried out by Buyers own

Yes
empanelled agency

Type Of Inspection Stage-wise Inspection

Name of the Empanelled Inspection

CONCERNED ONGC QUALITY ASSURANCE DEPARTMENT
Agency/ Authority

1/8
 Bid Details

Estimated Bid Value 47983683.5

Evaluation Method Total value wise evaluation

EMD Detail

Required No

ePBG Detail

Advisory Bank State Bank of India

ePBG Percentage(%) 3.00

Duration of ePBG required (Months). 7

(a). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable.

Beneficiary:
GM (F&A) - I/c Finance Department
CAMBAY ASSET, NA, Oil and Natural Gas Corporation Limited, Ministry of Petroleum and Natural Gas
(Rajkumar Ash)

Splitting

Bid splitting not applied.

MII Purchase Preference

MII Purchase Preference Yes

MSE Purchase Preference

MSE Purchase Preference Yes

1. Experience Criteria: In respect of the filter applied for experience criteria, the Bidder or its OEM {themselves or
through reseller(s)} should have regularly, manufactured and supplied same or similar Category Products to any
Central / State Govt Organization / PSU / Public Listed Company for number of Financial years as indicated above
in the bid document before the bid opening date. Copies of relevant contracts to be submitted along with bid in
support of having supplied some quantity during each of the Financial year. In case of bunch bids, the category of
primary product having highest value should meet this criterion.
2. Preference to Make In India products (For bids < 200 Crore):Preference shall be given to Class 1 local supplier
as defined in public procurement (Preference to Make in India), Order 2017 as amended from time to time and its
subsequent Orders/Notifications issued by concerned Nodal Ministry for specific Goods/Products. The minimum
local content to qualify as a Class 1 local supplier is denoted in the bid document. If the bidder wants to avail the
Purchase preference, the bidder must upload a certificate from the OEM regarding the percentage of the local
content and the details of locations at which the local value addition is made along with their bid, failing which
no purchase preference shall be granted. In case the bid value is more than Rs 10 Crore, the declaration relating
to percentage of local content shall be certified by the statutory auditor or cost auditor, if the OEM is a company
and by a practicing cost accountant or a chartered accountant for OEMs other than companies as per the Public
Procurement (preference to Make-in -India) order 2017 dated 04.06.2020. Only Class-I and Class-II Local suppliers

2/8
as per MII order dated 4.6.2020 will be eligible to bid. Non - Local suppliers as per MII order dated 04.06.2020 are
not eligible to participate. However, eligible micro and small enterprises will be allowed to participate .In case
Buyer has selected Purchase preference to Micro and Small Enterprises clause in the bid, the same will get
precedence over this clause.
3. Purchase preference to Micro and Small Enterprises (MSEs): Purchase preference will be given to MSEs as
defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued
by Ministry of Micro, Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned
Ministry. If the bidder wants to avail the Purchase preference, the bidder must be the manufacturer of the offered
product in case of bid for supply of goods. Traders are excluded from the purview of Public Procurement Policy for
Micro and Small Enterprises. In respect of bid for Services, the bidder must be the Service provider of the offered
Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the
offered product or service. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15%
(Selected by Buyer)of margin of purchase preference /price band defined in relevant policy, such Seller shall be
given opportunity to match L-1 price and contract will be awarded for 25%(selected by Buyer) percentage of
total QUANTITY.
4. Estimated Bid Value indicated above is being declared solely for the purpose of guidance on EMD amount and
for determining the Eligibility Criteria related to Turn Over, Past Performance and Project / Past Experience etc.
This has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any
impact on bid participation. Also this is not going to be used as a criteria in determining reasonableness of
quoted prices which would be determined by the buyer based on its own assessment of reasonableness and
based on competitive prices received in Bid / RA process.
5. Past Performance: The Bidder or its OEM {themselves or through re-seller(s)} should have supplied same or
similar Category Products for 20% of bid quantity, in at least one of the last three Financial years before the bid
opening date to any Central / State Govt Organization / PSU / Public Listed Company. Copies of relevant
contracts (proving supply of cumulative order quantity in any one financial year) to be submitted along with bid
in support of quantity supplied in the relevant Financial year. In case of bunch bids, the category related to
primary product having highest bid value should meet this criterion.
6. Inspection of Stores by Nominated Inspection Authority / Agency of buyer or their
authorized representatives

An independent third party Professional Inspection Body can help buyer in mitigating buyer’s risk with pre-
dispatch/post-dispatch inspection in order to ensure that equipment, components, solutions and documentation
conform to contractual requirements. The buyer has a right to inspect goods in reasonable manner and within
reasonable time at any reasonable place as indicated in contract. Inspection Fee/ Charges (as pre-greed between
buyer and Inspection Agency) would be borne by the buyer as per their internal arrangement but may be
recovered from the seller if the consignment failed to conform to contractual specification and got rejected by
the Inspection Officer .If so requested and accepted by the seller , initially seller may pay for inspection
charges as applicable and get the same reimbursed from buyer if consignment accepted by the Inspecting
Officer . For reimbursement seller has to submit proof of payment to Inspection Agency.

Seller/OEM shall send a notice in writing / e-mail to the Inspecting officer / inspection agency specifying the place
of inspection as per contract and the Inspecting officer shall on receipt of such notice notify to the seller the date
and time when the stores would be inspected. The seller shall, at his own expenses, afford to the Inspecting
officer, all reasonable facilities as may be necessary for satisfying himself that the stores are being and or have
been manufactured in accordance with the technical particulars governing the supply. The decision of the
purchaser representative /inspection authority regarding acceptance / rejection of consignment shall be final and
binding on the seller.

The Seller shall provide, without any extra charge, all materials, tools, labour and assistance of every kind which
the Inspecting officer may demand of him for any test, and examination, other than special or independent test,
which he shall require to be made on the seller's premises and the seller shall bear and pay all costs attendant
thereon.

The seller shall also provide and deliver store / sample from consignment under inspection free of charge at any
such place other than his premises as the Inspecting officer may specify for acceptance tests for which
seller/OEM does not have the facilities or for special/ independent tests.

In the event of rejection of stores or any part thereof by the Inspecting officer basis testing outside owing to lack
of test facility at sellers premises, the seller shall, on demand, pay to the buyer the costs incurred in the
inspection and/or test. Cost of test shall be assessed at the rate charged by the Laboratory to private persons for
similar work.

Inspector shall have the right to put all the stores or materials forming part of the same or any part thereof to
such tests as he may like fit and proper as per QAP/governing specification. The seller shall not be entitled to
object on any ground whatsoever to the method of testing adopted by the Inspecting officer.

3/8
Unless otherwise provided for in the contract, the quantity of the stores or materials expended in test will be
borne by seller.

Inspecting officer is the Final Authority to Certify Performance / accept the consignment. The Inspecting
officer’s decision as regards the rejection shall be final and binding on the seller.

The seller shall if so required at his own expense shall mark or permit the Inspecting officer to mark all the
approved stores with a recognised Government or purchaser's mark.

Supply Of 50 Nos Of Cylindrical Storage Tanks Of Capacity 45m3 For ONGC Cambay
Asset ( 50 pieces )
(Minimum 50% Local content required for qualifying as Class 1 Local Supplier)

Brand Type Unbranded

Technical Specifications

Buyer Specification Document Download

Consignees/Reporting Officer and Quantity

Consignee/Reporti Delivery Schedule (In number of days

S.No. Address
ng Officer from contract start days)

Delivery to
Quantit Delivery to be
y start after completed
388620,MM DEPARTMENT, by
Raiyani Harikrushn ONGC, CAMBAY ASSET, P.O.
1
Manubhai KANSARI, KHAMBHAT - 388630, 20 1 90
DIST. ANAND, GUJARAT.
20 91 120

10 121 150

Buyer added Bid Specific Additional Scope of Work

S.No. Document Title Description Applicable i.r.o. Items

General Conditions of
Contract Supply Of 50 Nos Of Cylindrical
1 General Conditions of Contract Storage Tanks Of Capacity 45m3
View For ONGC Cambay Asset(50)

Instructions to
Bidders Supply Of 50 Nos Of Cylindrical
2 Instructions to Bidders Storage Tanks Of Capacity 45m3
View For ONGC Cambay Asset(50)

4/8
 S.No. Document Title Description Applicable i.r.o. Items

Technical BEC
Compliance Matrix Supply Of 50 Nos Of Cylindrical
3 Technical BEC Compliance Matrix Storage Tanks Of Capacity 45m3
View For ONGC Cambay Asset(50)

Technical BEC Supply Of 50 Nos Of Cylindrical

4 Technical BEC Storage Tanks Of Capacity 45m3
View
For ONGC Cambay Asset(50)

Technical
Specification Crude
oil Storage Tanks Supply Of 50 Nos Of Cylindrical
Technical Specification Crude oil
5 45m3 Storage Tanks Of Capacity 45m3
Storage Tanks 45m3
For ONGC Cambay Asset(50)
View

Drawing 45m3 tanks Supply Of 50 Nos Of Cylindrical

6 Drawing 45m3 tanks Storage Tanks Of Capacity 45m3
View
For ONGC Cambay Asset(50)

Bidders Response
Sheet and Price Bid Supply Of 50 Nos Of Cylindrical
Format Bidders Response Sheet and Price Bid
7 Storage Tanks Of Capacity 45m3
Format
For ONGC Cambay Asset(50)
View

The uploaded document only contains Buyer specific Additional Scope of Work and / or Drawings for the bid items added
with due approval of Buyer’s competent authority. Buyer has certified that these additional scope and drawings are
generalized and would not lead to any restrictive bidding.

Buyer Added Bid Specific Terms and Conditions

1. Inspection

Nominated Inspection Agency: On behalf of the Buyer organization, any one of the following
Inspection Agency would be conducting inspection of stores before acceptance:
Pre-dispatch Inspection at Seller Premises (applicable only if pre-dispatch inspection clause has been
selected in ATC): ONGC QAD DEPARTMENT
Post Receipt Inspection at consignee site before acceptance of stores: NA

2. Generic

After award of contract – Successful Bidder shall have to get Detailed Design Drawings approved from
buyer before starting fabrication. Successful Bidder shall submit Detailed Design Drawings for Buyer's
approval, within 7 days of award of contract. Buyer shall, either approve the drawings or will provide
complete list of modification required in the drawings within 7 days. Seller shall be required to ensure
supply as per approved Drawings with modifications as communicated by Buyer. If there is delay from
buyer side in approval of drawing– the delivery period shall be refixed without LD for the period of delay
in approval of Drawing.

3. Generic

Bidder financial standing: The bidder should not be under liquidation, court receivership or similar
proceedings, should not be bankrupt. Bidder to upload undertaking to this effect with bid.

4. Certificates

5/8
 Bidder's offer is liable to be rejected if they don't upload any of the certificates / documents sought in the
Bid document, ATC and Corrigendum if any.

5. Generic

Bidders are advised to check applicable GST on their own before quoting. Buyer will not take any
responsibility in this regards. GST reimbursement will be as per actuals or as per applicable rates
(whichever is lower), subject to the maximum of quoted GST %.

6. Generic

Buyer Organization specific Integrity Pact shall have to be complied by all bidders. Bidders shall have to
upload scanned copy of signed integrity pact as per Buyer organizations policy along with bid. Click here
to view the file

7. Generic

Bidder shall submit the following documents along with their bid for Vendor Code Creation:

 a. Copy of PAN Card.

 b. Copy of GSTIN.

 c. Copy of Cancelled Cheque.

 d. Copy of EFT Mandate duly certified by Bank.

8. Buyer Added Bid Specific ATC

Buyer Added text based ATC clauses

The following Terms and Conditions are proposed to be incorporated in the Bid Document: -

1. Bidder is required to comply with Bid Evaluation Criteria, as uploaded at Additional

‘ Scope of Work’ Section.
Bidder is required to submit duly filled BEC Compliance Matrix also.

2. Bidder is requested to go through ‘General Conditions of Contract’ and ‘Instructions to Bidder’ uploaded at
‘Additional Scope of Work’ Section before submission of bid.

3. Bidder is required to mention GST rate and HSN Code, in their techno – Commercial Unpriced bid.

9. Generic

Data Sheet of the product(s) offered in the bid, are to be uploaded along with the bid documents. Buyers
can match and verify the Data Sheet with the product specifications offered. In case of any unexplained
mismatch of technical parameters, the bid is liable for rejection.

10. Past Project Experience

For fulfilling the experience criteria any one of the following documents may be considered as valid proof
for meeting the experience criteria:
a. Purchase Order copy along with Invoice(s) with self-certification by the bidder that supplies against the
invoices have been executed.
b. Execution certificate by client with order value.
c. Any other document in support of order execution like Third Party Inspection release note, etc.

11. Generic

OPTION CLAUSE: The Purchaser reserves the right to increase or decrease the quantity to be ordered up
to 25 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to
increase the ordered quantity by up to 25% of the contracted quantity during the currency of the
contract at the contracted rates. Bidders are bound to accept the orders accordingly.

6/8
12. Purchase Preference (Centre)

Purchase preference to Micro and Small Enterprises (MSEs): Purchase preference will be given to MSEs as
defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated
23.03.2012 issued by Ministry of Micro, Small and Medium Enterprises and its subsequent
Orders/Notifications issued by concerned Ministry. If the bidder wants to avail the Purchase preference,
the bidder must be the manufacturer of the offered product in case of bid for supply of goods. Traders are
excluded from the purview of Public Procurement Policy for Micro and Small Enterprises. In respect of bid
for Services, the bidder must be the Service provider of the offered Service. Relevant documentary
evidence in this regard shall be uploaded along with the bid in respect of the offered product or service. If
L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15% of margin of purchase
preference /price band defined in relevant policy, such Seller shall be given opportunity to match L-1
price and contract will be awarded for percentage of 25% of total value.

13. Generic

While generating invoice in GeM portal, the seller must upload scanned copy of GST invoice and the
screenshot of GST portal confirming payment of GST.

14. Generic

Whereever Essentiality Certificate is applicable (PEL/ML), successful bidder should provide Proforma
Invoice for processeing for EC application and material should be dispatche after receiving of EC rom
DGH. In view of the same, an ATC may be incorporated in GeM, viz, "BIDDER/OEM must provide Proforma
Invoice for processeing for EC application within 7 DAYS days from date of issue of GeM Contract and
material should be dispatche after receiving of EC rom DGH."

15. Purchase Preference (Centre)

Purchase Preference linked with Local Content (PP-LC) Policy:

The bid clause regarding “Preference to Make In India products” stands modified in this bid and shall be
governed by the PPLC Policy No. FP-20013/2/2017-FP-PNG dated 17.11.2020 issued by MoP&NG as
amended up to date. Accordingly, bidders with Local Content less than or equal to 20% will be treated as
“Non Local Supplier”. The prescribed LC shall be applicable on the date of Bid opening. Sanctions on the
bidders for false / wrong declaration or not fulfilling the Local Content requirement shall be as per the PPLC
policy. Further following additional provisions are added in the certification and verification of local content
provision of the Preference to Make in India clause:

i. In case of foreign bidder, certificate from the statutory auditor or cost auditor of their own office or
subsidiary in India giving the percentage of local content is also acceptable. In case office or
subsidiary in India does not exist or Indian office/subsidiary is not required to appoint statutory
auditor or cost auditor, certificate from practicing cost accountant or practicing chartered
accountant giving the percentage of local content is also acceptable.
ii. Along with Each Invoice: The local content certificate (issued by statutory auditor on behalf of
procuring company) shall be submitted along with each invoice raised. However, the % of local
content may vary with each invoice while maintaining the overall % of local content for the total
work/purchase of the pro-rata local content requirement. In case, it is not satisfied cumulatively in
the invoices raised up to that stage, the supplier shall indicate how the local content requirement
would be met in the subsequent stages.
iii. The bidder shall submit an undertaking from the authorized signatory of bidder having the Power of
Attorney along with the bid stating the bidder meets the mandatory minimum LC requirement and
such undertaking shall become a part of the contract.

16. Generic

Upload Manufacturer authorization: Wherever Authorised Distributors are submitting the bid,
Manufacturers Authorisation Form (MAF)/Certificate with OEM details such as name, designation, address,
e-mail Id and Phone No. required to be furnished along with the bid.

17. Generic

The buyer organization is an institution eligible for concessional rates of GST as notified by the

7/8
 Government of India. The goods for which bids have been invited fall under classification of GST
concession and the conditions for eligibility of concession are met by the institution. A certificate to this
effect will be issued by Buyer to the Seller after award of the Contract. Sellers are requested to submit
their bids after accounting for the Concessional rate of GST.
Applicable Concessional rate of GST : 5%
Notification No.and date : 03/2017 dated 28/06/2017

18. Scope of Supply

Scope of supply (Bid price to include all cost components) : Only supply of Goods

19. Forms of EMD and PBG

Successful Bidder can submit the Performance Security in the form of Account Payee Demand Draft also
(besides PBG which is allowed as per GeM GTC). DD should be made in favour of FINANCE AND
ACCOUNTS OFFICER payable at ONGC KHAMBHAT. After award of contract, Successful Bidder can upload
scanned copy of the DD in place of PBG and has to ensure delivery of hard copy to the original DD to the
Buyer within 15 days of award of contract.

20. Forms of EMD and PBG

Successful Bidder can submit the Performance Security in the form of Payment online through RTGS /
internet banking also (besides PBG which is allowed as per GeM GTC). On-line payment shall be in
Beneficiary name Oil and Natural Gas Corporation Limited Account No. 10681236016 IFSC Code
SBIN0010866 Bank Name State Bank of India Branch address KANSARI. Successful Bidder to indicate
Contract number and name of Seller entity in the transaction details field at the time of on-line transfer.
Bidder has to upload scanned copy / proof of the Online Payment Transfer in place of PBG within 15 days
of award of contract.

Disclaimer
The additional terms and conditions have been incorporated by the Buyer after approval of the Competent
Authority in Buyer Organization. Buyer organization is solely responsible for the impact of these clauses on the
bidding process, its outcome and consequences thereof including any eccentricity / restriction arising in the
bidding process due to these ATCs and due to modification of technical specification and / or terms and
conditions governing the bid. Any clause incorporated by the Buyer such as demanding Tender Sample,
incorporating any clause against the MSME policy and Preference to make in India Policy, mandating any Brand
names or Foreign Certification, changing the default time period for Acceptance of material or payment timeline
governed by OM of Department of Expenditure shall be null and void and would not be considered part of bid.
Further any reference of conditions published on any external site or reference to external documents / clauses
shall also be null and void. If any seller has any objection / grievance against these additional clauses or
otherwise on any aspect of this bid, they can raise their representation against the same by using the
Representation window provided in the bid details field in Seller dashboard after logging in as a seller within 4
days of bid publication on GeM. Buyer is duty bound to reply to all such representations and would not be
allowed to open bids if he fails to reply to such representations.

This Bid is also governed by the General Terms and Conditions

In terms of GeM GTC clause 26 regarding Restrictions on procurement from a bidder of a country which shares a land border with India, any bidder from a country which
shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority. While participating in bid, Bidder has to
undertake compliance of this and any false declaration and non-compliance of this would be a ground for immediate termination of the contract and further legal action
in accordance with the laws.

---Thank You---

8/8