Bin Vibrator Catalog
Bin Vibrator Catalog
Bin Vibrator Catalog
Vibrator Flowaids
www.syntronmh.com
Table of Contents
®
Syntron Vibrators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Electromagnetic Vibrators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2
®
Syntron Vibrators
®
Syntron Vibrators offer an efficient, cost-effective Syntron offers 2 types of vibrators – electromagnetic
means to maintain free flow of product from bins, and electric rotary. The vibrators provide product flow
hoppers and chutes, with a direct and positive result on solutions for just about any industry, application or
the bottom line. Whether the need is to ensure environment. Compact yet mighty, Syntron Vibrators
constant, uninterrupted material flow, or to eliminate are designed for years of high-performance, trouble-
the necessity for manual manipulation of a bin, hopper free continuous or intermittent operation, with the
or bulk material, Syntron Vibrators increase broadest selection of models and power ranges
productivity and reduce production costs. available.
® ®
Syntron Electric Rotary Vibrators Syntron Electromagnetic Vibrators
Syntron Electric Rotary Vibrators are motor driven for Syntron Electromagnetic Vibrators are ideal
reduced noise levels. These rugged vibrators are totally for continuous or intermittent operation. An easily
enclosed for reliable operation in dusty, dirty or moist adjustable control assures optimum and variable
environments. Adjustable eccentric weights allow easy material flow. Dependable Syntron Electromagnetic
adjustment of force to suit varying applications. Vibrators are virtually maintenance-free because the
electromagnetic design eliminates moving parts. Most
models come standard with fully-enclosed dust-tight
and watertight construction.
3
Electromagnetic Vibrators
®
Syntron Electromagnetic Vibrators
Keep Your Materials Flowing Efficiently and Economically
®
Syntron Electromagnetic Vibrators
from Syntron Material Handling offer
an economical means of maintaining
the flow of bulk materials from bins,
hoppers and chutes. They come with
an easily adjustable control which
provides flexibility and assures
optimum flow for the type of
material being handled. Furthermore,
Syntron Electromagnetic Vibrators
can be operated continuously or
intermittently depending upon the
specific requirements.
To assure the highest standard of
quality, Syntron Electromagnetic
Vibrators are factory tested and
®
adjusted for optimum performance. Syntron Electromagnetic Vibrators are available in a wide variety
Most models come standard with of sizes and force ratings.
totally enclosed, dust-tight and
waterproof construction. Since
these vibrators have no rotating
or sliding parts, they are virtually Features and Benefits
maintenance-free.
• Electromagnetic design
Syntron Electromagnetic Vibrators - No rotating or sliding parts; maintenance-free
come with the technical expertise - Ideal for continuous or intermittent operation
of Syntron Material Handling’s
application staff, who have been • Adjustable control
providing productive solutions for a - Varies vibration force with simple turn of control knob
wide variety of material handling • Urethane encapsulated magnet assemblies
problems for more than 80 years. - Provides protection from moisture and other contaminants
Call Syntron Material Handling - Prevents wire degradation
Application Specialists and request a
data sheet or download one from our • Productivity enhancing performance
website at www.syntronmh.com. - No need for manual labor to unclog bins or to
Syntron Electromagnetic Vibrators keep material flowing
may also be ordered online at • Simple design, durable, rugged construction
www.syntronmh.com. - Safe, reliable performance for years of service
• Wide range of sizes
- Accommodates your specific application
• Low noise models available
- Quiet, reliable operation
4
® ®
Syntron model V-41 Electromagnetic Syntron model V-20 Electromagnetic Vibrators maintain the
Vibrator installed on a stainless steel bin. flow of pasta from bins to packaging lines.
®
This Syntron model V-85 Electromagnetic Vibrator is maintaining
flow of dust particulates from the collecting hopper of an
electrostatic precipitator.
5
Electromagnetic Vibrators
®
Syntron Electromagnetic Vibrator Models
V-2 V-4
®
Syntron V-2 and V-4 Electromagnetic Vibrators are two of the
smallest industrial vibrators available. These versatile vibrators can
be controlled electrically with a separate control. When these V-9, V-20
vibrators are operated without a control, they can be mechanically
controlled by turning an easily accessible adjusting screw. Increased
amplitude can be obtained by using rectified AC power. Flexibility
and ease of installation are common to both models and the Model
V-41
V-4 is available with a dust-tight case.
Models V-9 and V-20 are compact in size, but at 3600 vpm, they pack
enough vibratory “punch” to excel in a wide range of applications.
Each is available with a separate dust-tight case.
V-50
Typical applications for the above models include installations on V-51
small bins, handling lightweight materials, or in counting, sorting or
packaging operations.
Impact and Cushioned Vibrator Compact Models
Models V-50, V-85 and V-180 are “solid” impact vibrators. These units
use a metal striking block to produce positive impact.
V-75
Models V-41, V-51, V-86 and V-181 are “cushioned” impact vibrators,
which utilize a rubber striking block to produce positive impact. Their
high power/low noise characteristics make them ideal for use in
confined areas with nearby workers. Physical dimensions and
electrical specifications are identical to the “solid” impact type
vibrators. Dust-tight and waterproof construction are standard for V-85
both versions. V-86
Open Models
Models V-75 and V-500 feature a power-packed, solid impact, open-type
design. They are used on difficult, heavy-duty applications. The V-500
is one of the largest magnetic vibrators available. Both the V-75 and V-180
V-500 are available with a separate dust-tight case.
V-181
Self-Contained Models
Models V-9 through V-500 require separate controls unless specifically
ordered as self-contained units. Self-contained units include a built-
in rectifier and they always operate at full force. Self-contained units
are recommended only where no force adjustment is required.
Models V-41 and V-500 are not available as self-contained units.
V-500
6
®
Selecting the Proper Syntron Electromagnetic Vibrator
The primary consideration in
vibrator selection is the thickness
of the bin or chute wall. Once the
proper vibrator model has been
selected from the Application
Tabulation Table, compare the
capacity in the tapered portion of
the bin with the rated capacity
shown in the table. If the rated
capacity is exceeded, multiple
vibrators may be required,
depending on the material being
handled. Stiffeners used to
reinforce the bin or chute may also
affect the selection or preferred
location of the vibrator. Please
contact Syntron Material Handling
for a copy of our data sheet and
®
assistance with selection of Syntron model V-20 Electromagnetic Vibrator ensures controlled feed
appropriate units in these from hopper to extruder.
applications.
Application Tabulation
No. Vibrators Needed per
Model Wall Thickness* Capacity in Tapered Portion of Bin/Hopper
V-2 24 ga (0.5 mm) 1 ft3 (0.03 m3)
V-4 22 ga (0.8 mm) 1 ft3 (0.03 m3)
V-9 20 ga (1 mm) 3 ft3 (0.08 m3)
1
V-20 ⁄16 in (1.5 mm) 10 ft3 (0.28 m3)
1
V-41 ⁄8 in (3 mm) 20 ft3 (0.57 m3)
1
V-51 ⁄8 in (3 mm) 30 ft3 (0.85 m3)
1
V-50 ⁄4 in (6 mm) 1 per 5-ton (4.5 metric ton)
1
V-86 ⁄4 in (6 mm) 1 per 5-ton (4.5 metric ton)
5
V-75 ⁄16 in (8 mm) 1 per 20-ton (18.1 metric ton)
5
V-85 ⁄16 in (8 mm) 1 per 20-ton (18.1 metric ton)
5
V-181 ⁄16 in (8 mm) 1 per 30-ton (27.2 metric ton)
3
V-180 ⁄8 in (10 mm) 1 per 50-ton (45.4 metric ton)
V-500 1 in (25 mm) 1 per 100-ton (90.7 metric ton)
7
Electromagnetic Vibrators
Specifications
V-9, V-20
Weight Input Amps Speed
Model lb kg 115V 230V 460V (vpm 50 Hz) (vpm 60 Hz)
V-9 9 1 /2 4.3 1.2 0.75 NA 3,000 3,600
V-20 14 6.4 2.0 1.0 0.5 3,000 3,600
Dimensions
A B C D E F G
Model in mm in mm in mm in mm in mm in mm in mm
V-9 10 1/4 260 9 1/4 235 8 203 4 1/4 108 4 1/16 103 9
/16 14 7
/16 11
V-20 10 1/4 260 9 1/4 235 8 203 5 1/8 130 4 5/16 110 1
/2 13 7
/16 11
V-41 Specifications
Weight Input Amps Speed
Model lb kg 115V 230V 460V (vpm 50 Hz) (vpm 60 Hz)
V-41 25 11.3 3.5 1.75 0.88 3,000 3,600
Dimensions
A B C D E F G
Model in mm in mm in mm in mm in mm in mm in mm
1 1 7 3 1 3 17
V-41 6 /4 159 6 /2 165 /16 11 9 /8 238 8 /4 210 7 /8 187 /32 13
Dimensions
A B C D E F G
Model in mm in mm in mm in mm in mm in mm in mm
1 1 15 3 1 3 11
V-50 9 /2 241 7 /4 184 /16 24 10 /4 273 9 /4 235 9 /4 248 /16 17
V-51 9 1/2 241 7 1/4 184 15
/16 24 10 3/4 273 9 1/4 235 9 3/4 248 11
/16 17
When ordering, specify 50 or 60 Hz operation. Refer to control information, page 10. For other voltage requirements, contact Syntron Material Handling.
8
V-85, V-86 Specifications
Weight Input Amps Speed
Model lb kg 115V 230V 460V (vpm 50 Hz) (vpm 60 Hz)
V-85, V-86 79 35.8 7.0 3.5 1.8 3,000 3,600
Dimensions
A B C D E F G H
Model in mm in mm in mm in mm in mm in mm in mm in mm
7 3 5 1 5 11
V-85 10 /16 265 8 /4 222 /8 16 11 /2 292 10 254 10 /8 270 7 178 /16 17
V-86 10 7/16 265 8 3/4 222 5
/8 16 11 1/2 292 10 254 10 5/8 270 7 178 11
/16 17
V-180 Specifications
Weight Input Amps Speed
Model lb kg 230V 460V (vpm 50 Hz) (vpm 60 Hz)
V-180, V-181 220 100 12.0 6.0 3,000 3,600
Dimensions
A B C D E F
Model in mm in mm in mm in mm in mm in mm
3 11 1 13
V-180 15 /16 386 11 279 /16 17 12 305 15 /4 387 /16 21
V-181 15 3/16 386 11 279 11
/16 17 12 305 15 1/4 387 13
/16 21
V-75 Specifications
Weight Input Amps Speed
Model lb kg 115V 230V 460V (vpm 50 Hz) (vpm 60 Hz)
V-41 V-75 113 51 16.0 8.0 4.0 3,000 3,600
Dimensions
A B C D E F G H J K L
Model in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm in mm
3 1 11 1 1 3
V-75 13 265 10 254 12 /8 314 /2 13 8 203 /16 17 6 /2 165 8 208 11 /2 292 13 330 /4 19
V-500 Specifications
Weight Input Amps Speed
Model lb kg 230V 460V (vpm 50 Hz) (vpm 60 Hz)
V-500 700 318 35.0 17.5 3,000 3,600
Dimensions
A B C D E F G H J
Model in mm in mm in mm in mm in mm in mm in mm in mm in mm
3 1 3 1 1 9
V-500 25 /4 654 14 /2 368 23 /4 603 20 508 13 330 1 /8 29 14 356 11 /2 292 1 /16 40
When ordering, specify 50 or 60 Hz operation. Refer to control information, page 10. For other voltage requirements, contact Syntron Material Handling.
9
Controls
Syntron® Vibrating Feeders are available for operation at other Velocity® RS drives can be provided
furnished with a standard control to voltages upon request. Control units for with a separate, standard RC control
vary the flow of material through the multiple feeder applications are (see pages 20-21) and are also
feeder by adjusting the amplitude of available. For special electrical available with a self-contained
the feeder pan. Standard control units standards, custom control enclosures rectifier. Units with a self-contained
include an operating switch, fuse and can be provided. In addition to the rectifier operate at full stroke.
adjustable control to vary the standard controls listed here, Syntron
amplitude. Material Handling can provide control
systems built to meet your
Controls are available for 115, 230 or requirements.
460 volts, 50 or 60 cycle power and are
10
Control Dimensions
Control A B C D E F G H J Weight
Model in mm in mm in mm in mm in mm in mm in mm in mm in mm lb kg
Power Pulse WT 6 1/4 160 3 1/2 89 2 1/4 57 3 1/4 82 5 3/4 146 2 1/4 57 – – – – – – 1 1/4 5
Conductor Series
15 & 28 Enc. 8 203 9 1/2 242 4 3/4 121 5 5/8 143 6 1/4 159 8 5/8 219 5
/16 8 – – 8 203 7 3.18
118 & 218 Enc. 8 203 10 254 4 3/4 121 5 5/8 143 6 1/4 159 8 5/8 219 5
/16 8 – – 8 203 8 3.63
420 & 518 Enc. 12 1/4 310 12 1/4 310 6 152 7 13/16 198 10 254 12 3/4 324 0.3 7.92 – – 12 303 18.5 8.4
15 & 28 Open Chassis 3 15/16 100 3 13/16 96 3 1/16 78 – – 3 1/4 82 3 1/4 82 0.18 4.5 – – – – 0.58 0.26
11
Electromagnetic Vibrators
®
Mounting Syntron Electromagnetic Vibrators
Correct location of electromagnetic vibrators is of prime importance in obtaining maximum efficiency from the
selected model. Note: Operate vibrators on hoppers only when the hopper is open to flow. Otherwise, vibration
may pack the hopper contents.
Rectangular Hoppers
Mount vibrator and
mounting channel as for Conical Hoppers
a conical hopper or a Mount the vibrator to the
curved surface. If a hopper (as for a curved
stiffener obstructs surface) 12 to 18 inches (300
mounting, mount the to 450 mm) or less from the
vibrator in the middle of discharge.
the panel next to the
stiffener. If required, a
second vibrator should
be mounted on the Inclined Chutes
opposite face at a slightly higher elevation. Chutes less than 10 to 12 feet
(3 to 3.6 m) long are usually
equipped with just one vibrator
Hopper with Sloping located well below the center.
Discharge Allow for the vibrator to be
Mount the vibrator on the moved about one foot (300
center line of the hopper, as mm) in either direction. On
close to the discharge as chutes requiring more than one
possible. An additional vibrator, the first one should be located 18 to 24 inches
vibrator may be required (450 to 500 mm) from the outlet. The second unit
on the discharge chute. should be mounted about half-way between the first
vibrator and the upper end. Allow for the vibrators to be
moved about one foot (300 mm) in either direction.
Note: Drawings illustrate typical installations. Specific installations
may require slight variations. For other applications not covered
here, please consult factory for recommendations.
12
Screw Feeder Belt Conveyor and Standard Bin
Screw conveyors feed from the back of the hopper. Mount vibrator on the belt discharge side of the hopper.
Vibrator should be 1/3 from the inlet. If two Follow mounting instructions for the appropriate bin type
vibrators are used, place second vibrator on on page 12.
opposite side, 1/3 from the discharge. Do not
operate the vibrator at the discharge end until the
back of the bin is empty and the vibrator at the
inlet is shut off.
Long Bin
Belt conveyors feed from the front of the hopper.
Vibrator should be 1/3 from front. If two vibrators
are used, place one on the opposite side and 1/3
from back. Do not operate the back vibrator until
the front is empty and the front vibrator is shut off.
13
Electric Rotary Vibrators
®
Syntron Electric Rotary Vibrators
Rugged construction, reliable performance to assure the efficient flow
of bulk materials
®
Syntron Electric Rotary Vibrators from Syntron
Material Handling provide a safe, reliable, cost-
effective way to maintain the flow of materials.
Motor-driven to provide virtually noiseless operation
(most models 76 db or less*), these vibrators help
facilitate material flow from the smallest bin, hopper
or chute to the largest silo, screens, feeders, grizzly
feeders, conveyors, fluid beds, shake-outs, helical
elevators, etc. Additionally, they are totally enclosed
to eliminate concerns over environmental factors
such as dust, dirt and rain. Syntron Electric Rotary
Vibrators can be used to pack material in drums and
bags as well as to consolidate material in pipe and
precast industries, in vibrating screen applications
and many other industrial environments. High
stroke/low frequency models are especially suitable
for hard-to-handle materials such as sawdust, cinder Features and Benefits
or clay content materials. • Motor driven for reduced noise level
Syntron Electric Rotary Bin Vibrators also come with • High force to weight ratio
the technical expertise of Syntron Material Handling's • Adjustable eccentric weights allow easy change of force
application staff, who have been providing productive to suit varying applications
solutions for a wide variety of material handling • Orbital action facilitates material flow in hopper &
problems for more than 80 years. chute applications
* At 3 feet (1 meter) on A scale • Terminal box for easy connection and change of voltage
(on 3 phase models) or direction of rotation
• Units sealed to IP66 except the AMV which is IP65
• Rugged, durable construction for many years with safe,
reliable performance
• Wide range of sizes to accommodate your specific
application
• Class F (Inverter Duty) windings are standard
• All units are tropical duty for high humidity applications /
locations
• Standard construction suitable for operation in -4 to +104
degree F ambient temperature locations
• Internal thermal detection is standard on larger units
• Each vibrator fully tested after assembly
• All units are designed for heavy and continuous duty at
the maximum centrifugal force
Electric Rotary Vibrators in Primary Feeder
Application • Wide range with centrifugal forces up to 50,000 lbs
14
®
Selecting the Proper Syntron Electric Rotary Vibrator
for Rotational and Elliptical Applications
Bins or Hoppers
In order to move material in a bin or hopper, the
friction between the material and the bin wall must ROTATIONAL
be broken. Once the friction is broken, the material obtained with
cannot cling to the sides of the bin and it will flow 1 Electric Vibrator
out through the discharge. For most applications, the
vibrator force needed to accomplish this is simply
calculated as follows:
• Calculate the weight of the material in the transition or
sloping part of the bin. Normally, this is the only place
where the friction between the material and the bin side
has to be broken. Do not calculate the total weight, only ELLIPTICAL
what is in the transition part of the bin. obtained with
• For conical bins, calculate as follows: 1 Electric Vibrator
.261 x dia.2 x height x material density in lb/ft3 (kg/m3) (not in center of gravity)
• For rectangular bins, calculate as follows:
Length x width x height x 1/3 x material density.
For packing or settling materials, use a vibrator with
When the weight (lb) has been calculated, divide the
an impact force of one-and-a-half to two times
weight by 10 to get the force or impact needed from
larger than the weight of the material plus
the vibrator (lbf). For example: The conical part of a
container. Find a suitable vibrator in the tables on
25-ton bin contains 7000 lb Divide 7,000 by 10 to get
pages 20 - 29.
the force (lbf) or impact needed from the vibrator.
Find a suitable vibrator on pages 20 - 29.
Vibrating Screens
Additional considerations when sizing vibrators to
For self-cleaning screen, use a vibrator with a
bins:
centrifugal force (impact) four times the weight of
• If the bin side angle is less than 30 degrees, select a the material plus the weight of the screen.
larger vibrator.
Note: Coarse, lumpy, sticky or wet materials respond
• If the bin has a vertical section, select a larger vibrator. best to high-frequency vibration; powdery and dry
• If the bin wall is extra thick select a larger vibrator. materials to low-frequency vibration.
• On very sticky and hard to move materials, it is better
to use two small vibrators instead of one large one Consolidating Concrete
(size the two smaller ones by dividing the required For three-inch “slump” concrete, use a vibrator with
force in half).
the same force (impact) as the weight of concrete
and form. For one- to two-inch slump concrete, an
Vibrating Tables for Packing Materials additional 30 to 50 percent impact is needed. For
dry mixes (zero slump) increase the impact by 100
Dense materials respond best to high-frequency
to 200 percent.
vibration (3600 rpm or more), while light, fluffy or
flaky materials respond best to low-frequency
vibration (1800 rpm or less).
Chutes
The force required of the vibrator is equal to the
weight of the chute plus the vibrator plus the
maximum material in the chute. See page 30 for
more information.
15
Electric Rotary Vibrators
SMH SMH Description Weight (lbs) Centrifugal Force (lbs) Static Moment (lb*in) RPM Amps
Model Part Number 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz 50Hz 60Hz
4 BOLT
AMV1-70BN 6515-040-BN 110 - 120V 60hz Single Phase 3 3/4 3 3/4 – 68 0.18 0.18 – 3,600 – 0.26
AMV1-70BM 6515-040-BM 220 - 240V 60hz Single Phase 3 3/4 3 3/4 – 68 0.18 0.18 – 3,600 – 0.13
AMV2-70BO 6515-040-BO 440 - 460V 60hz 3-Phase 3 3/4 3 3/4 – 68 0.18 0.18 – 3,600 – 0.07
AMV1-50AM 6515-040-AM 220 - 240V 50hz Single Phase 3 3/4 3 3/4 47 – 0.18 0.18 3,000 – 0.11 –
AMV2-50AQ 6515-040-AQ 380 - 415V 50hz 3-Phase 3 3/4 3 3/4 47 – 0.18 0.18 3,000 – 0.06 –
4 BOLT MOUNTING
16
Electric Rotary Vibrators
Specifications
SMH SMH Weight Centrifugal Force Static Moment Max Input Power Max Current Temp Class
Model Part Number (lbs) (lbs) (lb*in) (kw) Amps (°C)
4 BOLT
VV03N/2 6515-107-030 12.35 385.8 1.04 0.155 1.5 120
VV05N/2 6515-107-050 13.23 471.8 1.3 0.155 1.5 120
VV10N/2 6515-107-100 19.84 683.4 1.82 0.27 2.3 120
VV15N/2 6515-107-115 30.42 1080.3 2.95 0.48 4.2 120
VV25N/2 6515-107-125 43.21 1697.6 4.6 0.7 6.5 120
4 BOLT MOUNTING
17
Electric Rotary Vibrators
2-Pole (3 Phase)
Specifications
SMH SMH Weight Centrifugal Force Static Moment Max Input Power Max Current Temp Class
Model Part Number (lbs) (lbs) (lb*in) (kw) Amps (°C)
4 BOLT
VV03N/2 6515-107-003 12.35 385.8 1.04 0.17 0.29 120
VV05N/2 6515-107-005 13.23 471.8 1.3 0.17 0.29 120
VV10N/2 6515-107-010 19.84 683.4 1.82 0.26 0.48 120
VV15N/2 6515-107-015 30.42 1080.3 2.95 0.47 0.71 120
VV22N/2 6515-107-022 32.63 1651.3 4.51 0.47 0.71 120
VV25N/2 6515-107-025 43.21 1697.6 4.6 0.65 0.95 120
VV35N/2 6515-107-035 55.12 2425.1 6.6 1.1 1.6 120
VV38N/2 6515-107-038 76.06 3306.9 9.03 1.9 2.8 200
VV39N/2 6515-107-039 78.26 4144.7 11.28 1.9 2.8 200
VV40N/2 6515-107-040 113.54 4960.4 13.45 2.1 2.9 200
VV45N/2 6515-107-045 222.67 7054.8 19.1 3.8 5.4 135
VV55N/2 6515-107-055 227.08 8377.6 22.65 3.8 5.4 135
VV67N/2 6515-107-067 399.04 14219.8 38.62 5.3 7.7 135
VV71N/2 6515-107-071 465.18 19841.6 53.9 8.8 12.3 135
18
4 BOLT MOUNTING
2-Pole (3 Phase)
19
Electric Rotary Vibrators
4-Pole (3 Phase)
Specifications
SMH SMH Weight Centrifugal Force Static Moment Max Input Power Max Current Temp Class Cable Entry
Model Part Number (lbs) (lbs) (lb*in) (kw) Amps (°C) (in)
4 BOLT
VV03B/4 6515-069-003 12.3 92.6 1 0.09 0.19 120ーC .256-.472
VV05B/4 6515-069-005 13.9 176.3 1.92 0.09 0.19 120ーC .256-.472
VV06B/4 6515-069-006 14.5 264.5 2.87 0.09 0.19 120ーC .256-.472
VV10B/4 6515-069-010 25.4 484.9 5.28 0.16 0.38 120ーC .256-.472
VV20B/4 6515-069-020 39.7 925.7 10.07 0.33 0.57 120ーC .354-.630
VV21B/4 6515-069-021 44.1 1322.4 14.4 0.33 0.57 120ーC .354-.630
VV30B/4 6515-069-030 57.3 1719.1 18.66 0.62 0.93 120ーC .354-.630
VV35B/4 6515-069-035 90.4 2204 23.95 0.64 0.9 120ーC .354-.630
VV38B/4 6515-069-038 114.6 3085.6 33.58 1 1.43 120ーC .354-.630
VV40B/4 6515-069-040 125.6 3857 41.91 1.2 1.83 150ーC .354-.630
VV41B/4 6515-069-041 154.3 4518.2 49.11 1.4 2.2 170ーC .354-.630
VV50B/4 6515-069-050 174.1 5510 59.96 1.6 2.9 150ーC .354-.630
VV53B/4 6515-069-053 202.8 6942.6 75.49 1.9 3.3 135ーC .354-.630
VV55B/4 6515-069-055 249.1 8375.2 91.11 2.4 3.7 135ーC .354-.630
VV57B/4 6515-069-057 264.5 9477.2 103.08 2.7 4.4 135ーC .354-.630
VV60B/4 6515-069-060 365.9 10909.8 118.62 3.2 4.8 135ーC .512-.787
VV67B/4 6515-069-067 440.8 14546.4 158.18 5.7 8.6 135ーC .512-.787
VV71B/4 6515-069-071 469.5 18072.8 191.77 7.6 10.9 135ーC .512-.787
6 BOLT
VV81B/4 6515-069-081 672.2 19836 215.71 8 11.3 135ーC .512-.787
20
4 BOLT MOUNTING
6 BOLT MOUNTING
4-Pole (3 Phase)
2.44-2.91 4.17 8.23 4.92 1.2 0.35 0.94 0.91 3.66 5.94 4.84 2.4 1.77
2.44-2.91 4.17 8.86 4.92 1.2 0.35 0.94 0.91 3.66 5.94 4.84 2.4 2.09
2.44-2.90 4.17 8.86 4.92 1.2 0.35 0.94 0.91 3.66 5.94 4.84 2.4 2.09
3.54 4.92 11.6 5.98 1.3 0.51 1.1 1.18 3.66 6.81 5.67 2.87 2.91
4.13 5.51 13.4 6.57 1.25 0.51 1.18 1.18 4.37 7.99 6.42 3.25 3.78
4.13 5.51 15 6.57 1.25 0.51 1.18 1.18 4.37 7.99 6.42 3.25 4.37
4.72 6.69 14.8 8.07 1.5 0.67 1.57 1.3 4.37 8.44 7.52 3.6 3.82
4.72 6.69 17.1 8.27 2.36 0.67 0.86 1.87 4.37 9.57 8.78 4.55 4.64
5.51 7.48 17.2 9.06 2.83 0.67 0.98 1.77 4.37 10.1 9.49 4.9 4.06
5.51 7.48 19.1 9.06 2.83 0.67 0.98 1.77 4.37 10.1 9.49 4.9 5
5.51 7.48 21.9 9.06 2.83 0.67 0.98 1.77 4.37 10.1 9.49 4.9 6.4
6.1 8.86 20.6 10.8 3.13 0.87 1.1 2.17 4.37 11.1 10.7 5.51 5.1
6.1 8.86 23.6 10.8 3.13 0.87 1.1 2.17 4.37 11.1 10.7 5.51 6.63
6.1 8.86 23.2 12.2 4.07 0.93 1.18 2.36 6.1 13.2 12.2 6.3 5.51
6.1 8.86 25.9 12.2 4.07 0.93 1.18 2.36 6.1 13.2 12.2 6.3 6.85
7.09 11 25.1 13.4 4.17 1.02 1.18 2.56 6.1 14.5 13.2 6.81 6.06
7.87 12.6 26.1 15.3 4.37 1.1 1.26 2.95 6.1 15 15.1 7.44 5.94
7.87 12.6 24.6 15.4 4.37 1.1 1.38 2.95 6.1 15.9 15.8 7.85 5.2
6 BOLT
4.92 12.6 33.9 18.1 2.76 1.54 1.38 3.74 6.7 17.1 17.3 8.46 9.06
21
Electric Rotary Vibrators
6-Pole (3 Phase)
Specifications
SMH SMH Weight Centrifugal Force Static Moment Max Input Power Max Current Temp Class Cable Entry
Model Part Number (lbs) (lbs) (lb*in) (kw) Amps (°C) (in)
4 BOLT
VV10B/6 6515-065-010 21.15 110.2 2.69 0.13 0.29 120 0.564 - 1.041
VV11B/6 6515-065-011 27.1 308.5 7.54 0.31 0.29 120 0.564 - 1.041
VV20B/6 6515-065-020 41.87 634.7 15.53 0.2 0.48 120 0.781 - 1.388
VV30B/6 6515-065-030 46.28 661.2 16.14 0.36 0.65 120 0.781 - 1.388
VV35B/6 6515-065-035 103.58 1582.4 38.7 0.36 0.65 120 0.781 - 1.388
VV38B/6 6515-065-038 121.22 1983.6 48.5 0.72 1.3 135 0.781 - 1.388
VV40B/6 6515-065-040 134.44 2534.6 61.95 0.71 1.3 135 0.781 - 1.388
VV41B/6 6515-065-041 163.09 3306 81.3 0.95 1.9 170 0.781 - 1.388
VV50B/6 6515-065-050 187.34 3519.7 86.07 1.3 2.1 135 0.781 - 1.388
VV53B/6 6515-065-053 211.58 4848.8 119.31 1.6 2.7 200 0.781 - 1.388
VV55B/6 6515-065-055 264.48 55730.4 140.13 2 3.6 135 0.781 - 1.388
VV57B/6 6515-065-057 293.13 7052.8 173.54 2.3 4.1 135 0.781 - 1.388
VV60B/6 6515-065-060 396.72 8595.6 210.16 2.8 4.7 135 1.128 - 1.735
VV62B/6 6515-065-062 431.98 10358.8 254.84 3.5 5.8 135 1.128 - 1.735
VV65B/6 6515-065-065 484.88 11681.2 285.65 3.8 6.2 135 1.128 - 1.735
VV67B/6 6515-065-067 526.75 14105.6 344.91 4.7 7.6 135 1.128 - 1.735
VV71B/6 6515-065-071 628.14 17852.4 436.54 7.1 10.7 135 1.128 - 1.735
VV75B/6 6515-065-075 643.56 19174.8 468.91 7.7 12.1 135 1.128 - 1.735
6 BOLT
VV81B/6 6515-065-081 755.97 21599.2 528.17 7.5 11.6 135 1.128 - 1.735
VV110B/6 6515-065-110 800.05 24244 592.65 9.6 15.4 135 1.128 - 1.735
VV130B/6 6515-065-130 848.54 26448 646.7 9.6 15.4 135 1.128 - 1.735
22
4 BOLT MOUNTING
6 BOLT MOUNTING
6-Pole (3 Phase)
3.54 4.92 10.03 5.98 1.29 0.512 1.102 1.18 3.66 6.81 5.66 2.87 2.12
3.54 4.92 7.67 5.98 1.29 0.512 1.102 1.18 3.66 6.81 5.66 2.87 2.91
4.13 5.51 13.38 6.57 1.26 0.512 1.181 1.18 4.37 7.99 6.41 3.24 3.58
4.72 6.69 14.8 8.07 1.49 0.669 1.575 1.29 4.37 8.44 7.52 3.6 3.81
4.72 6.69 17.16 8.26 2.36 0.669 0.866 1.87 4.37 9.56 8.78 4.54 4.64
5.51 7.48 17.24 9.05 2.83 0.669 0.984 1.77 4.37 10.11 9.48 4.9 4.05
5.51 7.48 19.13 9.05 2.83 0.669 0.984 1.77 4.37 10.11 9.48 4.9 5
5.51 7.48 21.92 9.05 2.83 0.669 0.984 1.77 4.37 10.11 9.48 4.9 6.39
6.1 8.85 20.55 10.82 3.13 0.866 1.102 2.16 4.37 11.14 10.66 5.51 5.09
6.1 8.85 20.55 10.82 3.13 0.866 1.102 2.16 4.37 11.14 10.66 5.51 5.09
6.1 10.03 25.9 12.2 4.07 0.925 1.181 2.36 6.1 13.18 12.16 6.29 6.85
7.08 10.03 27.48 12.2 4.07 0.925 1.181 2.36 6.1 13.18 12.16 6.29 7.63
7.08 11.02 28.74 13.38 4.17 1.024 1.181 2.55 6.1 14.52 13.22 6.81 7.87
7.87 11.02 31.1 13.38 4.14 1.024 1.181 2.55 6.1 14.52 13.22 6.81 9.05
7.87 12.59 28.97 15.35 4.37 1.102 1.26 2.95 6.1 15 15.11 7.44 7.4
7.87 12.59 32.91 15.35 4.37 1.102 1.26 2.95 6.1 15 15.11 7.44 9.37
7.87 12.59 33.62 15.43 4.37 1.102 1.378 2.95 6.1 15.86 15.82 7.85 9.72
4.92 12.59 33.62 15.43 4.37 1.102 1.378 2.95 6.1 15.86 15.82 7.85 9.72
6 BOLT
4.92 14.96 33.93 18.11 2.75 1.535 1.378 3.74 6.69 17.1 17.28 8.46 9.05
4.92 14.96 39.44 18.11 2.75 1.535 1.378 3.74 6.69 17.1 17.28 8.46 11.81
4.92 14.961 39.44 18.11 2.75 1.535 1.378 3.74 6.69 17.1 17.28 8.46 11.81
23
Electric Rotary Vibrators
8-Pole (3 Phase)
Specifications
SMH SMH Weight Centrifugal Force Static Moment Max Input Power Max Current Temp Class Cable Entry
Model Part Number (lbs) (lbs) (lb*in) (kw) Amps (~C) (in)
4 BOLT
VV20B/8 6515-095-020 42 359 14 0.23 0.71 120 .354-.630
VV30B/8 6515-095-030 60 597 26 0.36 1 120 .354-.630
VV35B/8 6515-095-035 79 1080 39 0.28 0.55 120 .354-.630
VV38B/8 6515-095-038 101 1433 62 0.42 1.1 120 .354-.630
VV40B/8 6515-095-040 126 1970 85 0.47 1.2 150 .354-.630
VV50B/8 6515-095-050 181 3044 132 1 2.1 150 .354-.630
VV53B/8 6515-095-053 205 3883 168 1.25 2.5 135 .354-.630
VV55B/8 6515-095-055 293 4655 201 1.7 3.7 135 .354-.630
VV60B/8 6515-095-060 443 6980 302 2.2 5 135 .512-.787
VV62B/8 6515-095-062 478 8596 372 2.8 5.8 135 .512-.787
VV65B/8 6515-095-065 533 9490 411 3.2 6.2 135 .512-.787
VV67B/8 6515-095-067 577 11461 496 4.1 7.4 135 .512-.787
VV71B/8 6515-095-071 705 14505 628 5.5 9 135 .512-.787
6 BOLT
VV81B/8 6515-095-081 930 22040 954 7 11.3 135 .512-.787
8 BOLT
VV141B/8 6515-095-141 1490 30856 1335 9.1 18.5 135 -
VV171B/8 6515-095-171 1567 38129 1650 10.5 18.9 135 -
VV221B/8 6515-095-221 2149 49590 2145 15.9 27.2 135 -
24
4 BOLT MOUNTING 6 BOLT MOUNTING
8 BOLT MOUNTING
8-Pole (3 Phase)
4.13 5.51 13.39 6.57 1.26 0.51 1.18 1.18 4.37 7.99 6.42 3.25 3.58
4.72 6.69 14.8 8.07 1.5 0.67 1.57 1.3 4.37 8.44 7.52 3.6 3.82
4.72 6.69 17.17 8.27 2.36 0.67 0.87 1.87 4.37 9.41 8.78 4.55 4.65
5.51 7.48 19.29 9.06 2.83 0.67 0.98 2.07 4.37 10.12 9.49 4.9 5.08
5.51 7.48 22.05 9.06 2.83 0.67 0.98 2.07 4.37 10.12 9.49 4.9 6.46
6.1 8.86 23.62 10.83 3.13 0.87 1.1 2.46 4.37 11.14 10.67 5.51 6.63
6.1 8.86 25.79 10.83 3.13 0.87 1.1 2.46 4.37 11.14 10.67 5.51 7.72
6.1 10.04 25.91 12.2 4.07 0.93 1.18 2.36 6.1 13.19 12.17 6.3 6.85
7.09 11.02 28.74 13.39 4.17 1.02 1.18 2.56 6.1 14.53 13.23 6.81 7.87
7.09 11.02 31.1 13.39 4.17 1.02 1.18 2.56 6.1 14.53 13.23 6.81 9.06
7.87 12.6 28.98 15.35 4.37 1.1 1.26 2.95 6.1 15 15.12 7.44 7.4
7.87 12.6 32.91 15.35 4.37 1.1 1.26 2.95 6.1 15 15.12 7.44 9.37
7.87 12.6 33.62 15.43 4.37 1.1 1.38 2.95 6.1 15.87 15.83 7.85 9.72
6 BOLT
4.92 14.96 39.45 18.11 2.76 1.54 1.38 3.74 6.69 17.11 17.28 8.46 11.81
8 BOLT
5.51 18.9 40.94 22.44 3.54 1.77 1.61 5.31 6.69 21.14 21.18 10.55 9.45
5.51 18.9 44.09 22.44 3.54 1.77 1.61 5.31 6.69 21.14 21.18 10.55 11.02
5.51 20.47 45.28 24.02 3.54 1.77 1.5 5.71 9.84 x 8.27 24.09 23.39 11.69 11.73
25
Electric Rotary Vibrators
®
Mounting Syntron Electric Rotary Vibrators
Vibrator selection and installation is based upon should be independently isolated. In addition, the
individual application requirements. For vibration vibrator should be mounted midway on a channel
distribution, each electric rotary bin vibrator should located underneath the length of the chute.
be mounted midway, on a length of channel, welded
Note: For free-flowing bulk material installations,
with its legs against the side of the bin. All electric
vibrators on hoppers should operate only when the
rotary bin vibrator models can be mounted with the
hopper is open to flow. Otherwise, packing of material
shaft in any position from horizontal to near vertical.
can result.
For maximum effectiveness, chutes requiring vibrators
26
®
Mounting Syntron Electric Rotary Vibrators, cont’d.
Screw Feeder Long Bin
Feeds from the back. Vibrator Belt conveyor feeds from
should be 1/3 from the inlet. front. Vibrator should be 1/3
If two vibrators are used, from front. If two vibrators are
place second vibrator on used, place one on opposite
opposite side, 1/3 from side and 1/3 from back.
the discharge. Do not Do not operate the
run the vibrator at the back vibrator until
discharge until the back the front is empty and
of the bin is empty and the front vibrator is
the vibrator at the inlet shut off.
is shut off.
Wood Bin
Use steel plate on
inside and bolt to
outside mounting
plate.
27
Look to Syntron Material Handling for exceptional value and performance in bulk material handling. For more
than 80 years, we’ve partnered with our customers to solve material handling requirements in the most
®
demanding and diverse industries and applications. Proven, low-maintenance and built to last, our Syntron
line—backed by our expert team of engineers and application specialists—sets the standard for quality,
performance and reliability.
Syntron Material Handling is committed to complete customer satisfaction, with fast, efficient solutions for
most bulk handling applications. From state-of-the-art electronic data capabilities, to expert sales and
engineering support specialists, we’re focused on ensuring a smooth design, production and installation
process—from start to finish. Once you’re up and running, our customer service and field service teams are on
call for technical service and support.
28
29
Corporate Office
P.O. Box 1370
Tupelo, Mississippi 38802
Phone: 662.869.5711
Fax: 662.869.7449
Saltillo Changshu
2730 Hwy 145 South #2 Road No. 1
Saltillo, Mississippi 38866 Changshu Export Processing Zone
Phone: 662.869.5711 Changshu, Jiangsu, China 215513
Fax: 662.869.7493 Phone: +86 0512.52299002
Toll Free: 800.356.4898 Fax: +86 0512.52297228
[email protected] [email protected]