Chemistry For Today General Organic and Biochemistry Hybrid Edition 8th Edition Seager Solutions Manual Download
Chemistry For Today General Organic and Biochemistry Hybrid Edition 8th Edition Seager Solutions Manual Download
Chemistry For Today General Organic and Biochemistry Hybrid Edition 8th Edition Seager Solutions Manual Download
LEARNING OBJECTIVES/ASSESSMENT
When you have completed your study of this chapter, you should be able to:
1. Use the concepts of energy and entropy to predict the spontaneity of processes and reactions.
(Section 8.1; Exercise 8.6)
2. Calculate reaction rates from experimental data. (Section 8.2; Exercise 8.14)
3. Use the concept of molecular collisions to explain reaction characteristics. (Section 8.3; Exercise 8.20)
4. Represent and interpret the energy relationships for reactions by using energy diagrams. (Section
8.4; Exercise 8.26)
5. Explain how factors such as reactant concentrations, temperature, and catalysts influence reaction
rates. (Section 8.5; Exercise 8.30)
6. Relate experimental observations to the establishment of equilibrium. (Section 8.6; Exercise 8.38)
7. Write equilibrium expressions based on reaction equations, and do calculations based on equilibrium
expressions. (Section 8.7; Exercises 8.40 and 8.46)
8. Use Le Châtelier’s principle to predict the influence of changes in concentration and reaction
temperature on the position of equilibrium for a reaction. (Section 8.8; Exercise 8.52)
8.2 a. The space shuttle leaves its nonspontaneous Rocket engines must continually
pad and goes into orbit. operate to push the shuttle into an
orbit.
b. The fuel in a booster rocket spontaneous Once the fuel is ignited, it will
of the space shuttle burns. continue to burn. No additional
energy has to be provided.
c. Water boils at 100°C and 1 nonspontaneous Heat must be continually supplied to
atm pressure. maintain boiling.
d. Water temperature increases nonspontaneous Increasing the temperature of water
to 100°C at 1 atm pressure. requires a continual supply of energy.
e. Your bedroom becomes nonspontaneous A room will not become orderly on its
orderly. own. Cleaning requires energy.
8.3 a. Any combustion process exergonic The reaction produces heat and is
spontaneous once begun.
b. Perspiration evaporating endergonic The process requires energy to change
from the skin a liquid to a gas. The energy is taken
from the skin as long as the body
temperature is higher than the
temperature of the surroundings,
Reaction Rates and Equilibrium 177
which cools the skin as the process
occurs.
c. Melted lead solidifying exergonic The process releases energy as a
liquid changes to a solid.
d. An explosive detonating exergonic The reaction releases heat and the
reaction continues without additional
energy input once it has been
activated.
e. An automobile being endergonic The car receives energy from the
pushed up a slight hill person pushing and the process
(from point of view of the would not occur spontaneously
automobile) without continued energy input.
8.4 a. An automobile being pushed up a slight hill exergonic The person pushing the car
(from point of view of the one pushing) gives energy to the car.
b. Ice melting (from point of view of the ice) endergonic Melting ice requires energy.
c. Ice melting (from point of view of exergonic The surroundings release
surroundings of the ice) heat into the ice.
d. Steam condensing to liquid water (from exergonic Heat must be released from
point of view of the steam) the steam.
e. Steam condensing to liquid water (from endergonic Heat must be absorbed by
point of view of surroundings of the steam) the surroundings.
8.7 a. The highest entropy example from this set is steam because the molecules are the most
random in the gaseous phase of matter.
b. The highest entropy example from this set is fallen leaves blown about on the ground
because the leaves are the most disordered in this example.
c. The highest entropy example from this set is a wastebasket containing torn and crumpled
sheets of paper because the paper is the most disordered in this example.
d. From the sugar’s perspective: The highest entropy example from this set is a 0.10 M sugar
solution because the sugar molecules are most separated in this solution.
From the water’s perspective: The highest entropy example from this set is the 10.0 M
sugar solution because the water molecules are most separated in this solution.
178 Chapter 8
e. The highest entropy example from this set is a banquet table immediately after dinner
because it is the most disordered example.
8.8 a. The highest entropy example from this set is the two opposing football teams when the
whistle is blown, ending the play. This is the highest entropy because the football players
from the two teams are most interspersed.
b. From the gold’s perspective, the highest entropy example is a 10% copper/gold alloy
because the gold atoms are more separated in this material.
From the copper’s perspective, the highest entropy example is a 2% copper/gold alloy
because the copper atoms are more separated in this material.
c. The purse on the ground with the contents scattered is the highest entropy example from
this set. This is the highest entropy example because the disorder is highest in this
example.
d. The coins in a piggy bank are the example from this set with the highest entropy. The
random arrangement of coins in the piggy bank represents greater disorder than the
other two examples.
e. The dozen loose pearls in a box are the example from this set with the highest entropy.
The random order of the pearl represents greater disorder than the other two examples.
8.9 Substances that change spontaneously are less stable than those that do not. Gold, stainless
steel, and chromium do not rust or tarnish, like iron and silver, respectively, do; therefore,
gold, stainless steel, and chromium are more stable than iron or silver.
8.12 a. The melting of a block of ice The changing height of the block, the changing
mass of the block, or the increasing volume of
liquid formed could be measured.
b. The setting (hardening) of concrete The ability of an object to penetrate or mark the
surface of the concrete could be measured.
c. The burning of a candle The changing height of the candle or the
changing mass of the candle could be measured.
Reaction Rates and Equilibrium 179
8.13 a. The diffusion of ink from a drop The changing diameter of the ink drop or the
placed in a pan of quiet, undisturbed changing color of the water could be measured.
water
b. The loss of water from a pan of The changing volume or depth of the water
boiling water could be measured.
c. The growth of a corn plant The changing height of the corn plant could be
measured.
8.14 a. Pure A and B are mixed, and after 12.0 minutes the 0.396 M 0.000 M M
0.0330
measured concentration of C is 0.396 mol/L. 12.0 min min
b. Pure A, B, and C are mixed together at equal 0.455 M 0.300 M M
0.0194
concentrations of 0.300 M. After 8.00 minutes, the 8.00 min min
concentration of C is found to be 0.455 M.
8.16 2
2.97 10 mol 0.000 M
250 mL 1 L
1000 mL
3.96 10 3
M
30.0 min min
8.17 2
3.91 10 mol 0.000 M
250 mL 1 L
1000 mL
1.04 10 2
M
15.0 min min
8.18 2.77 10 2
atm 500 mL 1L
1000 mL n 0.0821 Latm
molK 25.0 273 K
n 5.66 10 4 moles
5.66104 moles
0 M
500 mL 1L
M
1.51 10 6
1000 mL
8.21 For ionic reactions, the colliding reactants do not have to be oriented in a specific way in order
for the reaction to occur because the simple ions are charged and spherical.
8.22 As temperature increases, the molecules move faster. The faster the molecules move, the
more likely they are to collide.
As the temperature increases, the molecules gain energy. The more energy the molecules
have, the more they are likely to react once they collide.
Reaction Rates and Equilibrium 181
ENERGY DIAGRAMS (SECTION 8.4)
8.23 a. Exothermic (exergonic) reaction with b. Exothermic (exergonic) reaction without
activation energy activation energy
Both of these energy diagrams have the same average energy of the reactants, average
energy of products, and energy difference between reactants and products. The main
difference between these two energy diagrams is that the first diagram has an activation
energy and the second diagram does not.
Both of these energy diagrams have the same average energy of the reactants, average
energy of products, and energy difference between reactants and products. The main
difference between these two energy diagrams is that the first diagram has an activation
energy and the second diagram does not.
8.25
A catalyst lowers the activation energy for a reaction whether the reaction is exergonic or
endergonic, but it does not change the energy level of the reactants or the products.
182 Chapter 8
8.26
150°C
room temperature
Both of these energy diagrams have the same average energy of the reactants, average energy
of products, and energy difference between reactants and products (500 kJ/mol reactant). The
reaction that occurs at room temperature has a small activation energy (or possibly does not
require activation energy), but the reactants have sufficient energy to overcome the activation
energy barrier. The reaction that occurs at 150°C has a significant activation energy.
8.28 a. - 2+
2 I (aq) + Pb (aq) → PbI2 (s)
Rapid; The reactants are ions and the product is insoluble in water.
b. - - 2-
Br (aq) + I (aq) → BrI (aq)
Won’t react; These ions are stable and do not have affinity for each other.
c. NH3 (g) + HCl (g) → NH4Cl (s)
Rapid; The reactant molecules are in the gas phase and will collide frequently.
d. CaO (s) + CO2 (g) → CaCO3 (s)
The reaction rate depends on the surface area of the CaO. The larger the surface area of
the solid, the faster the reaction will occur.
8.29 a. Reactant particles must collide with one another in order for a reaction to occur. This is
the most important reaction mechanism assumption for explaining the influence of
concentration on reaction rates. The higher the concentration of reactants, the faster the
reaction rate because the reactant particles are colliding frequently. Conversely, the
lower the concentration of reactants, the slower the reaction rate because the reactant
particles are colliding less frequently.
b. Particles must collide with at least a certain minimum total amount of energy if the
collision is to result in a reaction. This is the most important reaction mechanism
Reaction Rates and Equilibrium 183
assumption for explaining the influence of catalysts on reaction rates. A catalyst lowers
the minimum total amount of energy required for a reaction to occur, thus a catalyst
increases reaction rates because the amount of energy required for a reaction to occur is
less than without the catalyst.
8.30 To speed up a reaction, I might (1) heat the reactants in order to increase the energy of the
reactants and the frequency of collision, (2) stir the reactants in order to increase the frequency
of collision, (3) increase the surface area of the reactants to increase the number of collisions,
and (4) add a catalyst to lower the activation energy for the reaction. Only three of these steps
are needed for a complete answer.
8.31 A reaction is started by mixing reactants. As time passes, the rate decreases because the
concentration of reactants decreases and the number of reaction-producing collisions also
decreases.
8.32 The reaction rate doubles for every 10°C increase in temperature. This reaction would only take
7.5 minutes at 40°C.
change in temperature 40C 20C 20C
The reaction rate doubles for every 10C temperature increase.
1 double of the reaction rate
20C change in temperature 2 doubles of the reaction rate
10C
or 1 quadruple of the reaction rate
The reaction rate will be 4 times faster; therefore, the time required will be one quarter as long.
1
30 min 7.5 min
4
8.33 The surface area of a solid reactant is more important than the amount of solid reactant
present in determining the rate of a reaction; the greater the surface area, the faster the
reaction will occur.
8.34 Catalysts speed up reactions by lowering the activation energy required for a reaction. The
activation energy may be lowered because the catalyst provides a surface on which the
reaction can occur or may react to form an intermediate structure that yields products and
regenerates the catalyst when it breaks apart.
8.36 a. H2 I2 → 2 HI
+ ←
colorless gas violet gas colorless gas
The color of the gas mixture will stop changing once equilibrium is reached.
184 Chapter 8
b. solid sugar + water →
← sugar solution
The amount of solid sugar will become constant once the mixture has reached
equilibrium.
c. N2 2 O2 → 2 NO2
+ ←
colorless gas colorless gas red-brown gas
Both the color and the pressure of the gas mixture will stop changing once equilibrium is
reached.
The pressure of the gas mixture will stop changing once equilibrium is reached.
The gas pressure and the amount of colorless solid will stop changing once equilibrium is
reached.
c. checking checks to pay
paycheck → →
account bills
8.39 As colorless N2O4 decomposes into the red-brown colored NO2, the concentration of N2O4 will
decrease as the concentration of NO2 increases. The red-brown color within the container will
be constant once equilibrium is established.
K eq
CO2 O2
N2 O4 € 2 NO2 NO2
2
b.
K eq
N2 O4
2 C2 H6 7 O2 € 4 CO2 6 H2 O CO2 H2 O
4 6
c.
K eq
C2 H6 O2 7
2
K eq
H2 Br 2
2 H2 S 3 O2 € 2 H2 O 2 SO2 H2 O SO2
2 2
b.
K eq
H2 S O2
2 3
c. 3 NO2 € N2 O5 NO
K eq
N2 O5 NO
NO2
3
4 NH3 3 O2 € 2 N2 6 H2 O N2 H2 O
2 6
d.
K eq
NH3 O2 3
4
2 NO 2 H2 € N2 2 H2 O N2 H2 O
2
e.
K eq
NO2 H2
2
Fe3 6 CN € Fe CN 6
3
8.42 a. Fe CN 3
6
K eq 6
Fe CN
3
Ag 2 NH3 € Ag NH3 2
b. Ag NH 3
2
K eq
Ag NH 3
2
c. Au 3 4 Cl € AuCl 4 AuCl 4
K eq 4
Au 3 Cl
Ni 2 6 NH3 € Ni NH3 6
2
8.43 a. Ni NH 3 2
2
6
K eq
Ni NH 3
6
b. Sn 2 2 Fe 3 € Sn 4 2 Fe 2 Sn 4 Fe 2
2
K eq 2
Sn 2 Fe 3
c. F2 2 Cl € 2 F Cl 2 F Cl 2
2
K eq
F2 Cl
2
b.
K
CH4 H2 O 3 H2 CO € CH4 H2 O
H2 CO
3
O2 2 O3 € 3 O2
3
c.
K
O3
2
d. NH3 O2 7
4 4 NO2 6 H2 O € 4 NH3 7 O2
K
NO2 H2 O
4 6
8.45 a.
K
PH3 F2 3 3 HF PF3 € PH3 3 F2
HF3 PF3
186 Chapter 8
b. O2 NH3
7 4 4 NO2 6 H2 O € 7 O2 4 NH3
K
NO2 H2 O
4 6
O ClO2 2 Cl 2 O5 € O2 4 ClO2
4
c.
K 2
Cl 2 O5
2
N2 H2 O 2 NO 2 H2 € N2 2 H2 O
2
d.
K
NO2 H2
2
8.46
K eq
Br2 Cl 2 0.26 M 0.26 M 0.47
BrCl2 0.38 M
2
8.47
COCl2
CO + Cl2
Initial Equilibrium Change
CO 0.79 M 0.25 M 0.25 M - 0.79 M = -0.54 M
Cl2 0.69 M 0.15 M 0.15 M - 0.69 M = -0.54 M
COCl2 0 M 0.54 M +0.54 M*
For every molecule of CO and Cl2 that react, one molecule of COCl2 is produced; therefore,
the decrease in concentration of both the CO and Cl 2 of 0.54 M corresponds to an increase in
concentration of 0.54 M for the COCl 2.
K eq
COCl2 0.54 M
14
COCl2 0.25 M 0.15 M
The equilibrium will shift to the right and the reaction will be less pink and more blue.
The reaction will use heat to make products; therefore, the container will become cooler to
the touch.
c. 3+
Fe (aq) 6 SCN- (aq) 3-
Fe(SCN)6 (aq);
+ →
←
brown colorless red
3+
Fe is added to the equilibrium mixture.
The equilibrium will shift to the right and the mixture will become less brown and more
red.
d. 2+
Pb (aq) 2 Cl- (aq) PbCl2 (s)
+ →
← + heat;
colorless colorless white solid
Cl- is added to the equilibrium mixture.
The equilibrium will shift to the right and more precipitate will form. Heat will also be
generated and the temperature of the container will increase.
e. C2H4 I2 → C2H4I2
colorless gas
+
violet gas ← colorless gas
+ heat;
8.54 a. 2+
Cu (aq) 4 NH3 (aq) 2+
Cu(NH3)4 (aq);
+ →
←
blue colorless dark purple
some NH3 is added to the equilibrium mixture.
The equilibrium will shift to the right and the mixture will become less blue and more
purple.
b. 2+
Pb (aq) 2 Cl- (aq) PbCl2 (s)
+ →
← + heat;
colorless colorless white solid
the equilibrium mixture is cooled.
The equilibrium will shift to the right and more precipitate will form. Heat will also be
generated and the temperature of the container will increase.
c. C2H4 I2 → C2H4I2
+ ← + heat;
colorless gas violet gas colorless gas
some C2H4I2 is removed from the equilibrium mixture.
The equilibrium will shift to the right and the mixture will become less violet and more
heat will be produced.
188 Chapter 8
d. C2H4 I2 → C2H4I2
colorless gas
+
violet gas ← colorless gas
+ heat;
-
The equilibrium will shift to the right. The amounts of H+ and HCO3 will decrease, while
the amounts of H2O and CO2 will increase. The concentration of the water will not be
significantly changed because this reaction is occurring in an aqueous environment.
The equilibrium will shift to the left. The amount of CO2 and H2O will increase, while the
amount of H2CO3 and the heat decrease. The concentration of the water will not be
significantly changed because this reaction is occurring in an aqueous environment.
The equilibrium will shift to the right. The amount of CO2 and H2O will decrease, while
the amount of H2CO3 and heat increase. The concentration of the water will not be
significantly changed because this reaction is occurring in an aqueous environment.
The equilibrium will shift to the right. During the shift to the right, the concentrations of
N2O and O2 will decrease and the concentration of NO2 will increase. (Note: The O2
equilibrium concentration will be higher than the initial O2 concentration because the
stress to the system was adding more O2 and not all of the “new” O2 will be used in the
shift to the right.)
The equilibrium will shift to the right. The concentration of SO3 will decrease and the
concentrations of SO2 and O2 will increase.
The equilibrium will shift to the right. The concentrations of CO and O2 will decrease and
the concentration of CO2 will increase.
ADDITIONAL EXERCISES
8.59 H2 (g) + F2 (g) 2 HF (g) should be a faster reaction than H2 (g) + I2 (g) 2 HI (g) because at
the same temperature, F2 and I2 have the same kinetic energy; however, the F2 molecules have
a faster velocity because they are much less massive than the I 2 molecules. The faster velocity
of the F2 molecules allows them to have more collisions with the H2 molecules, and
consequently, a faster reaction rate.
8.61 As temperature increases, the solubility of a gas in a liquid decreases. In a lake, the amount of
oxygen in water will decrease as the temperature increases. Bacteria require oxygen to
metabolize organic contaminants and use them as a food source, and as the temperature
increases, the metabolic rate of bacteria as well as their demand for oxygen increases. As a
result of the decrease of dissolved oxygen, the bacteria die. Dead bacteria do not require food
and the contaminants are not metabolized; therefore, the rate of chemical decontamination
decreases.
8.64 If the reaction A + B → C + D is designated as first order, the rate depends on (a) the
concentration of only one reactant.
8.66 A book is held six feet above the floor and then dropped. (a) The potential energy of the book
is converted to kinetic energy.
8.67 When a crane at a building site lifts a beam to its top height, the beam has high (b) potential
energy.
8.72 The best example of potential energy changing to kinetic energy is (a) pushing a rock off a
cliff.
8.76 A catalyst operates by (a) decreasing the activation energy barrier for a reaction.
8.77 It is not true for reversible chemical reactions that (c) when the reaction is finished, both
reactants and products are present in equal amounts.
8.78 When there is an increase in pressure to the system of 2 CO (g) O2 (g) € 2 CO2 (g) , one
would expect (a) an increase in the amount of carbon dioxide.
Reaction Rates and Equilibrium 191
8.79 If the temperature is increased for an exothermic reaction, then (b) equilibrium will shift to the
left.
8.80 For N2 (g) 3 H2 (g) € 2 NH3 (g) heat , it is incorrect that (a) an increase in temperature
will shift the equilibrium to the right.
8.81 (b) The concentrations of the reactants and products are constant.
8.82 The effect of the addition of a catalyst to a reaction in equilibrium is (c) there is no change in
composition of the reaction.
8.83 For the reaction: H2 (g) + Br2 (g) → 2HBr (g), the reaction can be driven to the left by (c)
increasing hydrogen bromide.
SO3 .
2
8.84 The equilibrium constant for 2 SO2 (g) O2 (g) € 2 SO3 (g) is (d) K c
SO2 O2
2
Kc
1.50 L 1.50 L 0.035
NOCl2 1.80 mole 2
1.50 L
K eq
PCl 3 Cl 2
PCl5
0.250 M 0.250 M
0.0245
PCl 5
PCl5 2.55 M
8.88 H 2 I 2 € 2 HI K eq 50.5
HI 2
K eq
H2 I 2
2
0.500 M
50.5
0.050I 2
I 2 0.099 M
192 Chapter 8
8.89 The other reactant in the lycopodium powder reaction shown in Figure 8.10 is oxygen gas.
The oxygen gas exists as individual molecules that react faster with the cloud of lycopodium
powder than with the pile of lycopodium powder because the surface area of lycopodium
powder exposed to oxygen is greater in the cloud of lycopodium powder than in the pile of
lycopodium powder.
A crushed Alka-Seltzer tablet should dissolve faster than a whole tablet because the surface
area of a crushed tablet is greater than the surface area of a whole tablet; therefore, the
crushed tablet has greater interaction with the solvent than the whole tablet does.
8.90 In the equation N2 O4 € 2 NO2 , heat is a reactant because the system favors the reactants
when the system is cooled and favors the products when the system is heated. LeChatelier’s
principle states that the equilibrium will shift to counteract the stress added to the system;
therefore, if the system is cooled and shifts toward the reactants, that means heat is a reactant
that could counteract the stress of cooling. If the system is heated and shifts toward the
products, that means heat is a reactant that needs to be used in order to counteract the stress
of heating. Heat is a reactant; therefore, the system is endothermic. The presence of a catalyst
in the tube would not influence the equilibrium concentrations of the two gases, it would
merely allow equilibrium to be reached sooner. The catalyst lowers the activation energy for
both the forward and reverse reactions equally, and therefore, only increases reaction rates.
8.92 Smoking is dangerous in the presence of oxygen gas. The abundance of oxygen (an oxidizing
agent) would increase the reaction rate for a redox reaction occurring between any reducing
agent and the oxygen gas. A lit cigarette or even a small amount of ash containing an ember
could provide the activation energy needed for an explosive redox reaction.
EXAM QUESTIONS
MULTIPLE CHOICE
1. In an exergonic process, the system:
a. gains energy. c. neither gains nor loses energy.
b. loses energy. d. more than one response is correct
Answer: B
Reaction Rates and Equilibrium 193
2. At 20˚C, a sample of solid spontaneously sublimes to a gas. This change in state is accompanied by
which of the following changes in the solid sample?
a. entropy & energy decrease c. entropy decreases & energy increases
b. entropy & energy increase d. energy decreases & entropy increases
Answer: B
5. Most automobiles function by burning gasoline by a process similar to the equation in which octane
is burned: C8H18 + O2CO2 + H2O + heat (not balanced)
Interpret the implications of this reaction.
a. It goes to the right because it is spontaneous after a spark is supplied.
b. It explains why a car stops running when there is no gas in the fuel tank.
c. Gasoline can be made commercially because the reaction can run backwards if the energy
is returned to the CO2 and H2O.
d. All of these responses are correct.
Answer: B
6. Which of the following states of matter generally has the lowest entropy?
a. a crystalline solid
b. a liquid
c. a gas
d. two of the three have virtually the same entropy
Answer: A
9. Which is an incorrect statement when discussing molecular collisions leading to the chemical
reaction, AB + CDAD + CB?
a. The faster the motion of the molecules, the more likely they are to collide.
b. The faster the motion of the molecules, the greater the probability that a chemical reaction
will occur.
c. The slower the motion of the molecules, the more likely that this reaction will become an
equilibrium reaction favoring the left side of the equation.
d. The relationship between molecular collisions and reaction rate is direct.
Answer: C
10. Which of the following is most closely related to the term "reaction rate"?
a. the temperature needed to initiate a reaction
b. the position of equilibrium when a reaction stops
c. the speed of a reaction
d. more than one response is correct
Answer: C
16. Sulfur reacts with oxygen to produce sulfur dioxide, but only if the high activation energy is
supplied. Which condition will lower the activation energy the most?
a. stirring the mixture
b. heating the mixture
c. using a catalyst
d. the activation energy cannot be lowered
Answer: C
20. If the reaction A + B € C occurs and pure A and B were mixed, which of the following would take
place as equilibrium was established?
a. The concentration of C would increase for a time, then remain constant.
b. The concentration of A would increase for a time, then decrease.
c. The concentration of B would increase for a time, then remain constant.
d. More than one response is correct.
Answer: A
196 Chapter 8
21. In a system of equilibrium, it is true that:
a. the rate of the forward reaction exceeds that of the reverse.
b. the rate of the forward reaction is lower than that of the reverse reaction.
c. the rate of the forward reaction is equal to the rate of the reverse reaction.
d. More than one response is correct.
Answer: C
Equilibrium. The following questions refer to the following equilibrium in which all reactants and
products are gases: CH4 + H2O € CH3OH + H2 + heat
Indicate the effect of the changing condition on the position of equilibrium.
Answer: C
Reaction Rates and Equilibrium 197
28. A K is calculated for a reaction that displays an equilibrium position far to the left, such as:
N2 + 3H2 € 2NH3 at 1 atm and 25˚C A possible equilibrium constant for this reaction is:
a. 0.5 c. 1.5
b. 0 d. There is no way to predict a possible K.
Answer: A
29. BrCl is put into a 1.00 liter container. At equilibrium, the molar concentration of BrCl is 0.382, and
that of Br2 is 0.319. Evaluate the equilibrium constant for the following reaction: Br2 + Cl2 € 2 BrCl
(all are gases).
a. 0.457 b. 0.699 c. 1.43 d. 5.74
Answer: C
30. When the equilibrium constant expression is written for the reaction: N2 + 3F2 € 2NF3,
what is the exponent of the concentration of fluorine, F2?
a. 1 b. 2 c. 3 d. 0
Answer: C
31. Which of the following statements about a K of 3.5 calculated for a specific chemical reaction at
equilibrium is definitely incorrect?
a. It was calculated by dividing the product of the products by that of the reactants.
b. It indicates that one side of the reaction has most of the matter present.
c. It is an evaluation of the extent of the two chemical reactions involved: the forward and the
reverse reactions.
d. A K of 3.5 indicates that a catalyst will push the reaction to the right.
Answer: D
34. Which of the following products is not suitable to timed-release method for medications that are
desired to have an extended effective level time?
a. appetite control materials c. fluoride compounds in a toothpaste
b. analgesics used for middle-aged people d. diuretics
Answer: C
198 Chapter 8
35. Which method can be used to produce a timed-release medication?
a. The patient is given the medication in small doses over time, rather than one larger dose.
b. The patient is to take the medication two or three times a day.
c. The medication is provided in special capsules that are subdivided into smaller, pulverized
portions of the medicinal compound.
d. The medication compound is produced in very small amounts and each is coated with a material
of varying thickness.
Answer: D
37. A catalyzed, aqueous chemical reaction occurs. Which of the following conditions will reach
completion the soonest?
a. a low concentration of catalyst c. a high concentration of catalyst
b. a high concentration of the reactants d. stirring the reaction mixture
Answer: C
39. If we remove CO2 from the following equation, CO + H2O + heat € CO2 + H2,
which way will the equilibrium shift?
a. to the left c. to the right
b. will have no effect d. not enough information to know
Answer: C
40. If we add a catalyst to the following equation, CO + H2O + heat € CO2 + H2,
which way will the equilibrium shift?
a. to the left c. to the right
b. will have no effect d. not enough information to know
Answer: B
43. Ice has a(n) ______ entropy than that of liquid water.
a. lower b. equal c. higher d. cannot tell
Answer: A
44. What would be the effect of doubling the pressure on the following equilibrium system?
N2(g) + 3F2(g) € 2NF3(g)
a. Shift it to the right.
b. Shift it to the left.
c. Have no effect.
d. Impossible to predict.
Answer: A
45. Which of the following would be the equilibrium expression for the following system?
N2(g) + 3F2(g) 2NF3(g)
a. N 2 F2 3 b. 3
NF c. 2 F2
N d. NF
2
3
NF3
2
N2 F2 NF3 N2 F2
3
Answer: D
TRUE-FALSE
1. Enthalpy always increases with increasing randomness.
Answer: F
2. When a spontaneous process is accompanied by an energy increase, then a large entropy increase
must also occur.
Answer: T
4. The reaction below does not progress at room temperature, but does at 1100˚C. Therefore, this
reaction is spontaneous at 1100˚C.
5. Chemical reactions always occur once the molecules of two substances collide.
Answer: F
200 Chapter 8
6. Butane, C4H10, burning in air, is an example of a substance combining with oxygen to produce CO 2
and H2O. If pure oxygen were to be supplied, the rate of combustion would increase significantly;
therefore, more energy is given off when 10 g of butane burns in pure oxygen than when 10 g of
butane burns in air.
Answer: F
7. A reaction rate can be described in terms of the change in concentration of either a reactant or a
product.
Answer: T
8. A reaction rate can be described using any unit of time (seconds, hours, etc.).
Answer: T
10. A reaction will occur each time two reactant molecules collide.
Answer: F
11. Activation energy is the total energy released when a reaction takes place.
Answer: F
12. Reactions that have a low energy of activation tend to proceed at a high rate.
Answer: T
13. The products of an exothermic reaction contain less energy than do the reactants.
Answer: T
14. Increasing the concentration of a reactant will increase the number of effective collisions.
Answer: T
15. Decreasing the temperature will decrease the number of effective collisions.
Answer: T
16. The effect of a catalyst is to eliminate the activation energy requirement of chemical reactions.
Answer: F
19. If heat is absorbed when a compound dissolves in water, the compound should be more soluble at
higher temperatures.
Answer: T
20. If the reaction A + BC is exothermic, the concentration of C should increase with increasing
temperature.
Answer: F