LoRaWAN compatible

smart street lighting

FRE-24-Zhaga-L luminaire controller - data sheet | 03/11/21 | v1.32

FRE-24-Zhaga-L - LoRaWAN
compatible, luminaire controller
Plug-and-play upgrade for lamps compatible with Zhaga socket (book 18) with full lamp
management and feedback functionality.

› ZHAGA socket (book18).

› Can control additional independent devices via DALI relay.
› Enables individual remote management, ON / OFF / Dimming of streetlight lamps with
DALI 2 / DiiA / Osram DEXAL / Philips SR control gear.
› Specially designed and optimized for LPWA networks.
› Autonomous operation based on predefined schedules, light level sensor and adaptive
lighting.
› Adaptive lighting capabilities based on DALI digital input for motion sensing.
› Bandwidth efficient with minimal communication requirements.
› Secure communication based on encryption keys.
› Electrical parameters monitoring (measured by DALI2 control gear): V, W, A, Wh, PF,
frequency.
› Advanced data synchronization and notification mechanism.
› Internal precision Real time clock (RTC) with backup battery.
› Infrared interface for local configuration.
› Integrated light level sensor.
› Over The Air (OTA) firmware update.
› Designed lifetime: 10+ years.

inteliLIGHT Lamp Lighting Panel Control and Public or Private Communication

IP Communication
Controllers Monitoring Unit Network

Municipal
Wireless
Network Electrical Vehicle
Chargers

City
Sensors
Security inteliLIGHT StreetLight Control
Traffic
Monitoring
Infrastructure Software (cloud or local server)

4A Fundatura Harmanului Street / Brasov 500240, ROMANIA

Phone: +40 268 333 766 / [email protected] / www.intelilight.eu

1/2 Subject to change without notice ©inteliLIGHT

 FRE-24-Zhaga-L
LED, CF, HID with DALI 2 / DiiA / Osram DEXAL / Philips SR
Lamp Type
control gear
Maximum lamp power Depending on the lamp control gear
Additional controlled devices Yes, independent controlled via DALI relay
Functions / Operation mode ON / OFF / Dimming
1%-100% (linear or logarithmic depending on control gear
Dimming range
settings)
Control interface DALI 2/ DiiA (IEC 62386)
Power supply 24 VDC
External interface infrared
DIMENSIONS (mm): Network interface LoRaWAN (Class C or Class A)
RF spectrum 868MHz / 915MHz / 923MHz
Inter-node mesh communication Optionally available, with motion sensor add-on
Last gasp Optional
Firmware update OTA (over the air)
GPS Optional
Security Encrypted communication based on security keys
Surge protection provided by DALI 2 control gear
128 events (daily / weekdays / weekends / fixed date /
Internal scheduling memory
exceptions)
Average power consumption 0.5W/ 24V contact module 1 - Zhaga (book 18)
Maximum power consumption 1W/ 24V contact module 1 - Zhaga (book 18)
Precision Real Time Clock (RTC) Battery operated
Real-time lamp operation Yes
Digital input No
IP rating IP66
Operating temperature range -25°C to +65°C
Weight 70 ± 5 g
Dimensions (diameter x height) 80 x 49 mm
Mounting Zhaga (book 18)
Radio Equipment Directive (RED), 2014/53/EU / Restriction
Compliant standards of the use of certain Hazardous Substances in electrical and
electronic equipment Directive (RoHS), 2011/65/EU
Certifications CE, SR Signify, FCC - in progress

CERTIFICATIONS: MEASURED PARAMETERS: CONFIGURABLE PARAMETERS: ALARMS MONITORED:

› Lamp power ›  Astronomical calendar scheduler › Over/ under voltage detection
› Line voltage ›  Predefined scheduler › Over/ under current detection
› Current ›  Start state ( Photocell / Schedule / › Lamp or driver fault detection
› Active power Manual) ›  Device failure
› Reactive power ›  Over/ under voltage threshold
› Apparent power ›  Over/ under current threshold
› Power factor ›  Fade time
› Energy consumption (active/ ›  Lamp warming time
reactive) ›  Lamp cooldown time
› Lamp / controller - running hours ›  Light level threshold
counter ›  Data transmission setup
› Lamp On / Off cycles counter ›  Alert priority setup

ELECTRICAL CONNECTIONS:

1 +24 V power supply

Negative pole for the [DALI] protocol

2 Ground for +24V power supply (contact 1)
DALI 2
1 luminaire
Ground for General Digital IO (contact 4)
2 driver
4 with 24V
3 3 Positive pole for the [DALI] protocol Aux Supply

General Digital I/O (greater than 7V)

4 (no power supplied by the controller to DALI driver)

2/2 Subject to change without notice ©inteliLIGHT