Data sheet 3RB3036-1UW1

Overload relay 12.5...50 A Electronic For motor protection Size S2, Class
10E Stand-alone installation Main circuit: Straight-through transformer
Auxiliary circuit: Screw Manual-Automatic-Reset

product brand name SIRIUS

product designation solid-state overload relay
product type designation 3RB3
General technical data
size of overload relay S2
size of contactor can be combined company-specific S2
power loss [W] for rated value of the current at AC in hot 0.1 W
operating state
● per pole 0.03 W
insulation voltage with degree of pollution 3 at AC rated 690 V
value
surge voltage resistance rated value 6 kV
maximum permissible voltage for safe isolation in
networks with grounded star point
● between auxiliary and auxiliary circuit 300 V
● between auxiliary and auxiliary circuit 300 V
● between main and auxiliary circuit 600 V
● between main and auxiliary circuit 690 V
shock resistance 15g / 11 ms
● according to IEC 60068-2-27 15g / 11 ms; Signaling contact 97 / 98 in position "Tripped": 8g / 11 ms
vibration resistance 1-6 Hz, 15 mm; 6-500 Hz, 20 m/s²; 10 cycles
thermal current 50 A
type of protection according to ATEX directive Ex II (2) G [Ex e] [Ex d] [Ex px] ; Ex II (2) D [Ex t] [Ex p]
2014/34/EU
certificate of suitability according to ATEX directive PTB 09 ATEX 3001
2014/34/EU
reference code according to IEC 81346-2 F
Substance Prohibitance (Date) 10/15/2014
Ambient conditions
installation altitude at height above sea level maximum 2 000 m
ambient temperature
● during operation -25 ... +60 °C
● during storage -40 ... +80 °C
● during transport -40 ... +80 °C
temperature compensation -25 ... +60 °C
relative humidity during operation 10 ... 95 %
Main circuit
number of poles for main current circuit 3
adjustable current response value current of the 12.5 ... 50 A
current-dependent overload release
operating voltage

3RB30361UW1 Subject to change without notice

7/31/2022
Page 1/5 © Copyright Siemens
 ● rated value 690 V
● at AC-3e rated value maximum 690 V
operating frequency rated value 50 ... 60 Hz
operational current rated value 50 A
operational current at AC-3e at 400 V rated value 50 A
operating power
● for 3-phase motors at 400 V at 50 Hz 7.5 ... 22 kW
● for AC motors at 500 V at 50 Hz 11 ... 30 kW
● for AC motors at 690 V at 50 Hz 11 ... 45 kW
Auxiliary circuit
design of the auxiliary switch integrated
number of NC contacts for auxiliary contacts 1
● note for contactor disconnection
number of NO contacts for auxiliary contacts 1
● note for message "tripped"
number of CO contacts for auxiliary contacts 0
operational current of auxiliary contacts at AC-15
● at 24 V 4A
● at 110 V 4A
● at 120 V 4A
● at 125 V 4A
● at 230 V 3A
operational current of auxiliary contacts at DC-13
● at 24 V 2A
● at 60 V 0.55 A
● at 110 V 0.3 A
● at 125 V 0.3 A
● at 220 V 0.11 A
Protective and monitoring functions
trip class CLASS 10E
design of the overload release electronic
UL/CSA ratings
full-load current (FLA) for 3-phase AC motor
● at 480 V rated value 50 A
● at 600 V rated value 50 A
contact rating of auxiliary contacts according to UL B600 / R300
Short-circuit protection
design of the fuse link
● for short-circuit protection of the main circuit
— with type of coordination 1 required gG: 250 A
— with type of assignment 2 required gG: 200 A
● for short-circuit protection of the auxiliary switch fuse gG: 6 A
required
Installation/ mounting/ dimensions
mounting position any
fastening method stand-alone installation
height 81 mm
width 55 mm
depth 109 mm
Connections/ Terminals
product component removable terminal for auxiliary Yes
and control circuit
type of electrical connection
● for main current circuit straight-through transformers
● for auxiliary and control circuit screw-type terminals
arrangement of electrical connectors for main current Top and bottom
circuit
type of connectable conductor cross-sections
● for main contacts
— solid or stranded 1x (1 ... 50 mm²), 2x (1 ... 35 mm²)

3RB30361UW1 Subject to change without notice

7/31/2022
Page 2/5 © Copyright Siemens
 type of connectable conductor cross-sections
● for auxiliary contacts
— solid 1x (0.5 ... 4 mm²), 2x (0.5 ... 2.5 mm²)
— solid or stranded 1x (0,5 ... 4 mm²), 2x (0,5 ... 2,5 mm²)
— finely stranded with core end processing 1x (0.5 ... 2.5 mm²), 2x (0.5 ... 1.5 mm²)
● at AWG cables for auxiliary contacts 1x (20 ... 14), 2x (20 ... 14)
tightening torque
● for auxiliary contacts with screw-type terminals 0.8 ... 1.2 N·m
design of screwdriver shaft Diameter 5 to 6 mm
size of the screwdriver tip Pozidriv PZ 2
design of the thread of the connection screw
● of the auxiliary and control contacts M3
Safety related data
protection class IP on the front according to IEC IP20
60529
touch protection on the front according to IEC 60529 finger-safe, for vertical contact from the front
Communication/ Protocol
type of voltage supply via input/output link master No
Electromagnetic compatibility
conducted interference
● due to burst according to IEC 61000-4-4 2 kV (power ports), 1 kV (signal ports) corresponds to degree of severity
3
● due to conductor-earth surge according to IEC 2 kV (line to earth) corresponds to degree of severity 3
61000-4-5
● due to conductor-conductor surge according to IEC 1 kV (line to line) corresponds to degree of severity 3
61000-4-5
● due to high-frequency radiation according to IEC 10 V in frequency range 0.15 to 80 MHz, modulation 80 % AM with 1
61000-4-6 kHz
field-based interference according to IEC 61000-4-3 10 V/m
electrostatic discharge according to IEC 61000-4-2 6 kV contact discharge / 8 kV air discharge
Display
display version for switching status Slide switch
Certificates/ approvals
General Product Approval EMC

Confirmation

For use in hazard- Declaration of

Test Certificates Marine / Shipping
ous locations Conformity

Special Test Certific- Type Test Certific-

ate ates/Test Report

Marine / Shipping other

Confirmation

Further information
Information- and Downloadcenter (Catalogs, Brochures,…)
https://www.siemens.com/ic10
Industry Mall (Online ordering system)

3RB30361UW1 Subject to change without notice

7/31/2022
Page 3/5 © Copyright Siemens
https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3RB3036-1UW1
Cax online generator
http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3RB3036-1UW1
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
https://support.industry.siemens.com/cs/ww/en/ps/3RB3036-1UW1
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...)
http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3RB3036-1UW1&lang=en
Characteristic: Tripping characteristics, I²t, Let-through current
https://support.industry.siemens.com/cs/ww/en/ps/3RB3036-1UW1/char
Further characteristics (e.g. electrical endurance, switching frequency)
http://www.automation.siemens.com/bilddb/index.aspx?view=Search&mlfb=3RB3036-1UW1&objecttype=14&gridview=view1

3RB30361UW1 Subject to change without notice

7/31/2022
Page 4/5 © Copyright Siemens
 RESET
TEST

97 NO
95 NC
-F

98 NO
96 NC

last modified: 2/9/2022

3RB30361UW1 Subject to change without notice

7/31/2022
Page 5/5 © Copyright Siemens