ATR4517R5-1929 Datasheet
ATR4517R5-1929 Datasheet
ATR4517R5-1929 Datasheet
DXXX-690-862/880-960/1710-2690-65/65/65-14i/14.5i/17.5i-M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 1.4m
Antenna Specifications
Electrical Properties
690 - 862 880 - 960 1710 - 2690
Frequency range (MHz)
690 - 820 790 - 862 880 - 960 1710 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
0 - 12 , continuously adjustable , each band
Electrical downtilt (°) 2 - 12 , continuously adjustable
separately
at mid Tilt 13.8 13.8 14.3 16.8 17.0 17.2 17.5
Gain (dBi)
over all Tilts 13.7 ±0.3 13.7 ±0.3 14.1 ±0.5 16.6 ±0.4 16.8 ±0.4 17.1 ±0.4 17.4 ±0.4
Side lobe suppression for first side
> 16 > 16 > 17 > 15 > 15 > 15 > 15
lobe above main beam (dB)
Horizontal 3dB beam width (°) 69 ±2 66 ±2 63 ±2 63 ±5 61 ±5 60 ±5 60 ±5
Vertical 3dB beam width (°) 15.3 ±1 13.5 ±1 12 ±1 6.5 ±0.5 6.0 ±0.5 5.2 ±0.3 4.8 ±0.3
VSWR < 1.5
Cross polar isolation (dB) ≥ 28 ≥ 28
≥ 28 (690 - 862 // 880 - 960 MHz)
Interband isolation (dB) ≥ 28 (690 - 862 // 1710 - 2690 MHz)
≥ 28 (880 - 960 // 1710 - 2690 MHz)
Front to back ratio, ± 30° (dB) ≥ 28 ≥ 28 ≥ 26 ≥ 27 ≥ 27 ≥ 27 ≥ 28
Cross polar ratio (dB) 0° ≥ 25 ≥ 22 ≥ 18 ≥ 17 ≥ 17 ≥ 20 ≥ 19
Max. power per input (W) 300 (at 50℃ ambient temperature) 250 (at 50℃ ambient temperature)
Intermodulation IM3 (dBc) ≤ -150 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
Accessories
Item Model Description Weight Units per antenna
Downtilt kit ASMDT0C01 Mechanical downtilt: 0 - 16 ° 1.9 kg 1 (Separate packing)
1
ATR4517R5
DXXX-690-862/880-960/1710-2690-65/65/65-14i/14.5i/17.5i-M/M/M-R
EasyRET Tri-Band Antenna with 3 Integrated RCUs - 1.4m
* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol switching function,
contact Huawei before system installation.
Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE
r - Red y - Yellow
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to
requirements described in the antenna installation guide.
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 2
3 Issue: 2015-07-31