MS11 - Capital Budgeting
MS11 - Capital Budgeting
MS11 - Capital Budgeting
TOPIC OUTLINE
Definition and
Purpose
Capital Bugeting
Process
Basic Concepts
Types of Projects
PV of 1
Time Value
of Money
PV of Ordinary Annuity of 1
Net Investment
Elements of Capital
Budgeting Cash Flows
CAPITAL
BUDGETING Discount Rate
Accounting Rate of
Profits
Return (ARR)
Payback Period
Techniques in Capital Non-
Budgeting Bail-out Period
discounted
Investment Decisions Payback Reciprocal
LECTURE NOTES
BASIC CONCEPTS
DEFINITION AND PURPOSE
Capital budgeting is the process of identifying, evaluating, planning, and financing capital investment projects of
an organization.
Capital budgeting is an investment concept by committing funds in current time with the purpose of receiving
desired returns in the future in the form of additional cash inflows or reduced cash outflows.
Capital budgeting involves long-term decision making with a large amount of resources and funds involved with
so much risk and uncertainty. Also, since it is a long-term decision making, decisions are usually more difficult
to reverse than short-term decision making.
Capital budgeting is usually used on the following decisions:
(1) Replacement and Acquisition of Long-term Assets (3) Trading or Exchanging Assets
(2) Improvement of Products
(3) Expansion of Facilities
CAPITAL BUDGETING PROCESS
(1) Identification and definition
(2) Search for potential investment projects
(3) Information gathering - both quantitative and qualitative information
(4) Selection- choosing the investment projects after evaluating their projected costs and benefits
(5) Financing
(6) Implementation and monitoring (Monitoring part is known as POST-AUDIT evaluation)
NOTE: Capital investments screening is being done by the CAPITAL BUDGETING COMMITTEE and approved by
BOARD OF DIRECTORS
TYPES OF PROJECTS
(A) INDEPENDENT PROJECTS (MUTUALLY INCLUSIVE PROJECTS)
These are projects which are evaluated individually and reviewed against predetermined corporate
standards of acceptability resulting to an accept or reject decision.
(B) MUTUALLY EXCLUSIVE PROJECTS
These are projects which require the company to choose among projects under consideration. The project
to be acceptable must pass the criteria of acceptability set by the company and must be better than other
investment alternatives.
TIME VALUE OF MONEY
Discounting is mostly used in capital budgeting. The question is when to use present value factors.
Present value of 1 (PV of 1) – used if the cash flows flow on a lump-sum basis.
Present value of ordinary annuity – used if the cash flows flow evenly on an annual basis.
ELEMENTS OF CAPITAL BUDGETING
These are the factors of capital budgeting used in evaluating capital investment proposals.
(1) NET INVESTMENT
Net investment represents the initial cash outlay that is required to obtain future returns or the net cash
outflows to support a capital project.
Simply stated, net investment is net cash flows at time zero.
SOLUTION GUIDE
To compute net investment, let us divide it into three (3) parts
OLD ASSET NEW ASSET WORKING CAPITAL
Trade in value (-) Acquisition Costs (+) Increase in Working Capital (+)
Proceeds from sale (-) Other Direct Costs (+) Decrease in Working Capital (-)
Tax on gain on sale (+)
Tax on loss on sale (-)
Avoidable repairs, net of tax (-)
Removal cost, net of tax (+)
NOTE: If the decision is an acquisition decision, computation of net investment is limited only to new asset
and working capital section. If it is a replacement decision, the three sections are complete.
(2) CASH FLOWS
These are the expected returns directly attributable to the investment project. Cash flows could be
OPERATING CASH FLOWS AFTER TAX or END OF LIFE CASH FLOWS
OPERATING CASH FLOWS AFTER TAX
The incremental changes in cash arising from cash inflows and cash outflows directly attributable to the
project. These cash flows are assumed to occur at the end of the year.
SOLUTION GUIDE
EBITDA / Cost Savings / Cash Operating Income xxx
Incremental Depreciation (xxx)
Cash Inflow before Tax xxx
Incremental tax (xxx)
Incremental Net Income xxx
Add back Incremental Depreciation xxx
OPERATING CASH FLOWS AFTER TAX xxx
NOTE: EBITDA or cash operating income is used if the purpose of the capital project is to increase net
cash flows. On the other hand, cost savings is used if the purpose of the capital project is reducing the
operating costs.
ALTERNATIVE SOLUTION GUIDE
EBITDA / Cost Savings after tax [EBITDA / CS x (1-tax rate)] xxx
Tax Shield on Incremental Depreciation (Incremental Depreciation x tax rate) xxx
OPERATING CASH FLOWS AFTER TAX xxx
SOLUTION GUIDE
1
Payback Reciprocal =
Payback Period
or
Operating Cash Flows After-tax
Payback Reciprocal =
Net Investment
DISCOUNTED TECHNIQUES
(1) NET PRESENT VALUE
NPV is the excess of the present value of cash inflows over present value of cash outflows generated by
the project throughout its life.
SOLUTION GUIDE
Present Value of Cash Inflows xxx
Present Value of Cash Outflows (xxx)
NET PRESENT VALUE xxx
NOTES:
(a) Cash inflows include the operating cash flows-after tax, salvage value or net proceeds from sale and
the return of working capital from original investment. Simply stated, these are the end of life cash
flows. Just remember to multiply them to their appropriate present value factors.
(b) Cash outflows are represented by the initial cost of the investment or the net investment. Since it
occurred at time zero, it is NOT DISCOUNTED.
ADVANTAGES DISADVANTAGES
(1) It requires predetermination of
(1) Emphasizes cash flows rather
the cost of capital or the discount
than net income
rate to be used.
(2) The net present value of
different competing projects
(2) Recognizes the time value of may not be comparable
money because of differences in
magnitudes or sizes of the
projects.
(3) Assumes discount rate as the
reinvestment rate
(c) Fisher rate is the rate where the projects will generate the same net present value.
(2) INTERNAL RATE OF RETURN
A.K.A. Discounted cash flow rate of return, time-adjusted rate of return or sophisticated rate of return.
This is the rate which equates the present value of cash inflows to present value of cash outflows. Simply
stated, it is the rate where present value is zero.
Guidelines in determining IRR:
(a) Determining the present value factor of IRR with the use of the below formula:
Net Investment
IRR factor =
Operating Cash Flow After-tax
NOTE: The above formula is the same as payback reciprocal, so, it can also be used if the cash flows after-
tax are even and the cash inflows consist only cash-flows after tax. (If there are salvage value and return
of working capital the formula cannot be used)
(b) Using the present value annuity table, find on line “n” (economic life) the factor computed in (a). The
corresponding rate is the IRR. If the exact rate is not found on the table, interpolation process may
be necessary.
(3) PROFITABILITY INDEX
A.K.A. NPV index.
Profitability index is designed to provide a common basis of ranking alternatives that require difference
amounts of investment.
SOLUTION GUIDES
Present Value of Cash Inflows
Profitability Index =
Present Value of Cash Outflows
NPV
Profitability Index = + 1
Net Investment
It is the period required for the discounted cumulative cash inflows on a project to equal the discounted
cumulative cash outflows (usually the initial cost). It is the same concept as payback period except that
cash flows should be discounted.
INVESTMENT DECISIONS
For independent projects:
Accept Reject Indifferent
NPV + - 0
IRR > DR < DR = DR
PI >1 <1 =1
Payback > ½ of Life < ½ of Life = ½ of Life
ARR > DR < DR = DR
For mutually exclusive projects:
If same size – basis would be NPV.
If different size – basis would be PI
CAPITAL RATIONING
Capital rationing is a situation in which management places a constraint on the total size of the firm’s capital
budget during a particular period. It is also described as the selection of the investment proposals in a situation
of constraint on availability of capital funds to maximize the wealth of the company by selecting those projects
which will maximize overall NPV.
STEPS IN CAPITAL RATIONING
(1) Rank the projects according to their profitability index
(2) Choose the combination of projects with the highest total NPV.
DISCUSSION EXERCISES
STRAIGHT PROBLEMS
NET INVESTMENT & OPERATING CASH FLOW AFTER TAX
1. FREYA CORP. is planning to replace an old machine with the following related information:
Book value P300,000
Remaining useful life 5 years
Current market value 150,000
Additional information:
• The replacement machine can be acquired at a list price of P500,000. A 5% cash discount is
available if the said machine is paid within 30 days from acquisition date. Freight and installation
costs is estimated at P75,000.
• Should the company decide not to acquire the new machine, it needs to repair the old one at a cost
of P50,000. Otherwise, additional cost of removing the old unit is estimated at P10,000.
• Additional gross working capital of P15,000 will be needed to support operation planned with the new
equipment.
• The new machine is estimated to reduce cash operating costs amounting to P150,000 per year and is
to be depreciated using the straight-line method over its useful life of 5 years.
• FREYA is subject to a 30% income tax rate.
REQUIREMENTS:
(1) What is the net initial cost of investment to be used in decision making?
(2) What is the increase in annual net income?
(3) What is the increase in annual net cash flows if the company replaces the machine?
NON-DISCOUNTED TECHNIQUES
2. BANE BUS TERMINAL INC. is planning to install vending machines with a cost of P300,000. It is estimated
that these vending machines will generate annual sales of 20,000 cups with a price of P10 per cup. Cash
variable costs are P4 per cup while cash fixed costs are expected to be P50,000 per year. The vending
machine’s estimated economic life would be 5 years with a salvage value of P50,000 and depreciated
using the straight-line method. BANE is subject to a 35% income tax rate.
REQUIREMENTS: (a) Determine the payback period; (b) Determine the accounting rate of return based on
original investment; (c) Determine the accounting rate of return based on the average investment
3. ALPHA CORP. received three capital investment proposals for its intention to acquire a new machine in the
near future. Information on these proposals are as follows:
PROPOSAL A PROPOSAL B PROPOSAL C
Initial Investment P150,000 P190,000 P250,000
Working Capital Requirements - 10,000 -
Reduction in Cash Operating Costs:
Year 1 50,000 75,000 90,000
Year 2 50,000 80,000 90,000
Year 3 50,000 80,000 90,000
Year 4 50,000 60,000 90,000
Salvage Value at each year-end:
Year 1 90,000 120,000 150,000
Year 2 80,000 90,000 80,000
Year 3 50,000 60,000 75,000
Year 4 20,000 60,000 60,000
Working Capital Returned - 10,000 -
REQUIREMENT: Determine payback period and bail-out period of each proposal.
DISCOUNTED TECHNIQUES
4. TERIZLA INC. is considering two independent projects. Their related information is as follows:
PROJECT 1 PROJECT 2
Cost of investment 300,000 250,000
Estimated salvage value 30,000 20,000
Useful life 5 years 5 years
Cost savings:
1st Year 100,000 90,000
2nd Year 100,000 90,000
3rd Year 100,000 90,000
4th Year 100,000 90,000
5th Year 100,000 90,000
The income tax rate is 30% and the cut-off rate is 10%.
REQUIREMENT: Determine the discounted payback period of PROJECT 1 and PROJECT 2.
5. ZILONG CORP. is planning to acquire a new asset with the following expectations: