Scribd
Upload
407 views4 pages

Vortex Pok3r User Manual v1.5

The POK3R user manual summarizes the features and specifications of the Vortexgear POK3R mechanical keyboard. It includes 61/62 keys in a compact size, Cherry MX switches, individually programmable keys and layers, PBT keycaps, LED backlighting, and support for Qwerty, Dvorak and Colemak layouts. The manual provides instructions for programming keys, layers and macros, restoring default settings, and using the DIP switches to configure keyboard options and layouts.

Uploaded by

derelay
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
407 views4 pages

Vortex Pok3r User Manual v1.5

The POK3R user manual summarizes the features and specifications of the Vortexgear POK3R mechanical keyboard. It includes 61/62 keys in a compact size, Cherry MX switches, individually programmable keys and layers, PBT keycaps, LED backlighting, and support for Qwerty, Dvorak and Colemak layouts. The manual provides instructions for programming keys, layers and macros, restoring default settings, and using the DIP switches to configure keyboard options and layouts.

Uploaded by

derelay
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

POK3R User manual

Description:
The Vortexgear POK3R is the perfect solution for limited spaces in situations. Built up 3
kinds of layout, it features individually programmable keys with 3 layers customization
options, all easily set through what you want.

Main Specification:
1. Tiny size keyboard with 61/62 keys
2. Cherry MX inside
3. Arbitrary programming
4. PBT Keycaps
5. Individual LED coding (Backlit version only)
6. 3 layers customization
7. Built-up 3 kind of layout (Qwerty, Dvorak, Colemak)
8. Metal bezel

Package Content
1. Keyboard x 1
2. USB Cable x 1
Programming Instruction
Note:
The POK3R built in 4-layers. The default layer can not be programmed. Only layer 2~layer 4 can be.
FN + R_ctrl, M,<,> and ? keys are fixed can not be programmed.
Step 1. Choose the layer (FN+<,> or ? key) which you want to programming.
Step 2. Press FN + Right CTRL to enter the programming mode (Spacebar right LED steadily lit)
Step 3. Press the key you want to program (Spacebar right LED flashing)
Step 4. Key in the programming content and then press PN (Spacebar right LED steadily lit again)
Step 5. Repeat step 2 and step 3 to program other keys.
Step 6. Press FN + Right CTRL to exit programming mode ( Spacebar right LED off)

More:
· Support FN layer programming, you can select the FN combination key (e.g., FN + A) to program it
· Under SELECT state (step 1), you can press PN + any key to view its content in a word processing
Software (e.g., Notepad)
· Support time delay, press 15ms key (FN + T) each time to delay 15ms, press 0.1s key (FN + G) each time
to delay 0.1s, press 0.5s key(FN + B) each time to delay 0.5s. Consecutive delay will add up but will only
be counted as 1 key stroke.
· Every key can program up to 32 key strokes.
· If there is no key pressed for 15 sec in programming mode, it will exit to normal mode.

Restore to factory default


Press and hold FN + R, Spacebar left LED is flashing at the after 5 sec. Then the layer will restore to default.
Note:
1. You can clean the programmed keys layer by layer, OR
Press and hold both Alt (Right and Left) will clean all layers program key codes if you had programmed. (It will
return default layer.)
2. If you have changed the FN position and forget where it is. You still can press the original FN (The right side of
the right ALT) position and R to restore it.
FN composite keys
FN General keys Remark
ESC `
1 F1
2 F2
3 F3
4 F4
5 F5
6 F6
7 F7
8 F8
9 F9
0 F10
-_ F11
=+ F12
I
FN + Key code change
J
K
L
P PrtSc
[{ ScrLk
]} Pause
Z APP
H Home
N End
U PgUp
O PgDn
Backspace Del
“’ Del
;: Ins

I
Switching Layer Remark
M Default Spacebar left LED off
Spacebar left LED
<, Layer 2
showing BLUE color.
FN + = Spacebar left LED
>. Layer 3
showing RED color
Spacebar left LED
?/ Layer 4
showing Purple color

Backlight key function Remark


X Light down
FN + C Light on/off ( Backlit version only)
V Light up
DIP Switch function description:
SW 1 SW 2 Layout Remark
ON ON = Colemak

ON OFF = Dvorak
Default = OFF
OFF ON = Qwerty
OFF OFF = Qwerty

ON OFF Remark
SW 3 CapsLock = FN CapsLock = CapsLock Default = OFF

Change FN&PN R_CTRL Shall not be


SW 4
FN&PN in any position in the original position changed to FN or PN

Others:
1. Left_Shift + ESC = ~

2. FN + ESC = `

3. FN + Q = Choose LED color

4. FN + W = Record 1

5. FN + E = Record 2

6. FN + D = CM1

7. FN + F = CM2

Note:

No.3 ~ No.7 ONLY for backlit version.

Enjoy now for this fantastic tool and your typing feeling.

You might also like