UD5005 /N1SG/N1B/U1B/K1B

Service S1SG/S1B/R1B

SUPER AUDIO CD/

Manual BLU-RAY DISC PLAYER

• For purposes of improvement, specifications and design are subject to change without notice.

• Please use this service manual with referring to the operating instructions without fail.

• Some illustrations using in this service manual are slightly different from the actual set.

Ver. 8
UD5005 Please refer to the
MODIFICATION NOTICE.

S0533-0V08DM/DG1209
 MARANTZ DESIGN AND SERVICE

Using superior design and selected high grade components, marantz company has created the ultimate in stereo sound.
Only original marantz parts can insure that your marantz product will continue to perform to the specifications for which it
is famous.
Parts for your marantz equipment are generally available to our National Marantz Subsidiary or Agent.
ORDERING PARTS :
Parts can be ordered either by mail or by Fax.. In both cases, the correct part number has to be specified.
The following information must be supplied to eliminate delays in processing your order :
1. Complete address
2. Complete part numbers and quantities required
3. Description of parts
4. Model number for which part is required
5. Way of shipment
6. Signature : any order form or Fax. must be signed, otherwise such part order will be considered as null and void.

USA EUROPE / TRADING CANADA

MARANTZ AMERICA, INC D&M EUROPE B. V. D&M Canada Inc.
100 CORPORATE DRIVE P. O. BOX 8744, BUILDING SILVERPOINT 5-505 APPLE CREEK BLVD.
MAHWAH, NEW JERSEY 07430 BEEMDSTRAAT 11, 5653 MA EINDHOVEN MARKHAM, ONTARIO L3R 5B1
USA THE NETHERLANDS CANADA
PHONE : +31 - 40 - 2507844 PHONE : 905 - 415 - 9292
FAX : +31 - 40 - 2507860 FAX : 905 - 475 - 4159

JAPAN KOREA
D&M Holdings Inc. D&M SALES AND MARKETING KOREA LTD.
D&M BUILDING, 2-1 NISSHIN-CHO, 2F,YEON BLDG.,
KAWASAKI-KU, KAWASAKI-SHI, 88-5, BANPO-DONG, SEOCHO-GU,
KANAGAWA, 210-8569 JAPAN SEOUL KOREA
PHONE : +82 - 2 - 715 - 9041
FAX : +82 - 2 - 715 - 9040

CHINA
D&M SALES AND MARKETING SHANGHAI LTD.
ROOM.808 SHANGHAI AIRPORT CITY TERMINAL
NO.1600 NANJING (WEST) ROAD, SHANGHAI,
CHINA. 200040
TEL : 021 - 6248 - 5151
FAX : 021 - 6248 - 4434

NOTE ON SAFETY :
Symbol z Fire or electrical shock hazard. Only original parts should be used to replaced any part marked with symbol z .
Any other component substitution (other than original type), may increase risk of fire or electrical shock hazard.

安全上の注意：
zがついている部品は、安全上重要な部品です。必ず指定されている部品番号の部品を使用して下さい。

SHOCK, FIRE HAZARD SERVICE TEST :

CAUTION : After servicing this appliance and prior to returning to customer, measure the resistance between either primary
AC cord connector pins (with unit NOT connected to AC mains and its Power switch ON), and the face or Front Panel of
product and controls and chassis bottom.
Any resistance measurement less than 1 Megohms should cause unit to be repaired or corrected before AC power is applied,
and verified before it is return to the user/customer.
Ref. UL Standard No. 60065.

In case of difficulties, do not hesitate to contact the Technical

Department at above mentioned address.
091105DM/DG

2
 SAFETY PRECAUTIONS
The following items should be checked for continued protection of the customer and the service technician.

LEAKAGE CURRENT CHECK

Before returning the set to the customer, be sure to carry out either (1) a leakage current check or (2) a line to chassis
resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the
power cord is less than 460 kohms, the set is defective.
Be sure to test for leakage current with the AC plug in both polarities, in addition, when the set's power is in each state (on,
off and standby mode), if applicable.

CAUTION Please heed the following cautions and instructions during servicing and
inspection.
◎◎ Heed the cautions! ◎◎ Make a safety check after servicing!
Cautions which are delicate in particular for servicing Check that all screws, parts and wires removed or
are labeled on the cabinets, the parts and the chassis, disconnected when servicing have been put back in
etc. Be sure to heed these cautions and the cautions their original positions, check that no serviced parts
described in the handling instructions. have deteriorate the area around. Then make an
insulation check on the external metal connectors and
◎◎ Cautions concerning electric shock!
between the blades of the power plug, and otherwise
(1) An AC voltage is impressed on this set, so if
check that safety is ensured.
you touch internal metal parts when the set is
energized, you may get an electric shock. Avoid (Insulation check procedure)
getting an electric shock, by using an isolating Unplug the power cord from the power outlet,
transformer and wearing gloves when servicing disconnect the antenna, plugs, etc., and on the power.
while the set is energized, or by unplugging the Using a 500V insulation resistance tester, check that
power cord when replacing parts, for example. the insulation resistance value between the inplug and
(2) There are high voltage parts inside. Handle with the externally exposed metal parts (antenna terminal,
extra care when the set is energized. headphones terminal, input terminal, etc.) is 1MΩ or
greater. If it is less, the set must be inspected and
◎◎ Caution concerning disassembly and
repaired.
assembly!
Through great care is taken when parts were
manufactured from sheet metal, there may be burrs CAUTION Concerning important safety
on the edges of parts. The burrs could cause injury if
fingers are moved across them in some rare cases.
parts
Wear gloves to protect your hands. Many of the electric and the structural parts used in
◎◎ Use only designated parts! the set have special safety properties. In most cases
The set's parts have specific safety properties (fire these properties are difficult to distinguish by sight, and
resistance, voltage resistance, etc.). Be sure to use the use of replacement parts with higher ratings (rated
parts which have the same properties for replacement. power and withstand voltage) does not necessarily
The burrs have the same properties. In particular, for guarantee that safety performance will be preserved.
the important safety parts that are indicated by the z Parts with safety properties are indicated as shown
mark on schematic diagrams and parts lists, be sure to below on the wiring diagrams and the parts list in this
use the designated parts. service manual. Be sure to replace them with the parts
which have the designated part number.
◎◎ Be sure to mount parts and arrange the wires
as they were originally placed! (1) Schematic diagrams........Indicated by the z mark.
For safety seasons, some parts use tapes, tubes or (2) Parts lists........Indicated by the z mark.
other insulating materials, and some parts are mounted The use of parts other than the
designated parts could cause electric
away from the surface of printed circuit boards.
shocks, fires or other dangerous
Care is also taken with the positions of the wires by
situations.
arranging them and using clamps to keep them away
from heating and high voltage parts, so be sure to set
everything back as it was originally placed.

3
NOTE FOR SCHEMATIC DIAGRAM
WARNING:
Parts indicated by the z mark have critical characteristics. Use ONLY replacement parts recommended by the manufacturer.
CAUTION:
Before returning the set to the customer, be sure to carry out either (1) a leakage current check or (2) a line to chassis resistance check. If
the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the power cord is less than 460 kohms, the set
is defective.
WARNING:
DO NOT return the set to the customer unless the problem is identified and remedied.
NOTICE:
ALL RESISTANCE VALUES IN OHM. k=1,000 OHM / M=1,000,000 OHM
NOTE
ALL FOR PARTS
CAPACITANCE VALUES ARE LIST
EXPRESSED IN MICRO FARAD, UNLESS OTHERWISE INDICATED. P INDICATES MICRO-MICRO
FARAD. EACH VOLTAGE AND CURRENT ARE MEASURED AT NO SIGNAL INPUT CONDITION. CIRCUIT AND PARTS ARE SUBJECT
TO CHANGE WITHOUT PRIOR NOTICE.

NOTE FOR PARTS LIST

1. Parts indicated by "nsp" on this table cannot be supplied.
2. When ordering a part, make a clear distinction between "1" and "I" (i) to avoid mis-supplying.
3. A part ordered without specifying its part number can not be supplied.
4. Part indicated by "★" mark is not illustrated in the exploded view.
5. General-purpose Carbon Film Resistor in the P.W.Board parts list. (Refer to the Schematic Diagram for those parts.)
6. General-purpose Carbon Chip Resistors are not included are not included in the P.W.Board parts list.
(Refer to the Schematic Diagram for those parts.)
WARNING: Parts indicated by the z mark have critical characteristics. Use ONLY replacement parts recommended by the manufacturer.
● Resistors
Ex.: RN 14K 2E 182 G FR
Type Shape Power Resist- Allowable Others
and per- ance error
formance

RD : Carbon 2B : 1/8 W F : ±1% P : Pulse-resistant type

RC : Composition 2E : 1/4 W G : ±2% NL : Low noise type
RS : Metal oxide film 2H : 1/2 W J : ±5% NB : Non-burning type
RW: winding 3A : 1 W K : ±10% FR : Fuse-resistor
RN : Metal film 3D : 2 W M : ±20% F : Lead wire forming
RK : Metal mixture 3F : 3 W
3H : 5 W
* Resistance
1 8 2 1800ohm=1.8kohm
Indicates number of zeros after effective number.
2-digit effective number.
1 R 2 1.2ohm
1-digit effective number.
2-digit effective number, decimal point indicated by R.
: Units: ohm
● Capacitors
Ex.: CE 04W 1H 3R2 M BP
Type Shape Dielectric Capacity Allowable Others
and per- strength error
formance

CE : Aluminum foil 0J : 6.3 V F : ±1% HS : High stability type

electrolytic 1A : 10 V G : ±2% BP : Non-polar type
CA : Aluminium solid 1C : 16 V J : ±5% HR : Ripple-resistant type
electrolytic 1E : 25 V K : ±10% DL : For change and discharge
CS : Tantalum electrolytic 1V : 35 V M : ±20% HF : For assuring high frequency
CQ : Film 1H : 50 V Z : ±80% U : UL part
CK : Ceramic 2A : 100 V : - 20% C : CSA part
CC : Ceramic 2B : 125 V P : +100% W : UL-CSA part
CP : Oil 2C : 160 V C : ±0.25pF F : Lead wire forming
CM: Mica 2D : 200 V D : ±0.5pF
CF : Metallized 2E : 250 V = : Others
CH : Metallized 2H : 500 V
2J : 630 V

* Capacity (electrolyte only)

2 2 2 2200μF 2 R 2 2.2μF
Indicates number of zeros after effective number. 1-digit effective number.
2-digit effective number. 2-digit effective number, decimal point indicated by R
･ Units:μF. ･ Units:μF.
* Capacity (except electrolyte)

2 2 2 2200pF=0.0022μF 2 2 1 220pF
Indicates number of zeros after effective number. (More than 2) Indicates number of zeros after effective number. (0 or 1)
2-digit effective number. 2-digit effective number.
･ Units:pF ･ Units:pF
･ When the dielectric strength is indicated in AC,"AC" is included after the dielectric strength value.

4
WARNING AND LASER SAFETY INSTRUCTIONS
GB WARNING NL WAARSCHUWING
All ICs and many other semi-conductors are Alle IC’s en vele andere halfgeleiders zijn gevoelig
susceptible to electrostatic discharges (ESD). voor elektrostatische ontladingen (ESD).
Careless handling during repair can reduce life Onzorgvuldig behandelen tijdens reparatie kan de
drastically. levensduur drastisch doen verminderen.
When repairing, make sure that you are connected Zorg ervoor dat u tijdens reparatie via een polsband
with the same potential as the mass of the set via a met weerstand verbonden bent met apparaat.
wrist wrap with resistance. Houd componenten en hulpmiddelen ook op
Keep components and tools also at this potential. ditzelfde potentiaal.

F ATTENTION D WARNUNG I AVVERTIMENTO

Tous les IC et beaucoup d’autres semiconducteurs Alle IC und viele andere Halbleiter sind Tutti IC e parecchi semi-conduttori sono sensibili
sont sensibles aux décharges statiques (ESD). empfindlich gegen elektrostatische alle scariche statiche (ESD).
Leur longévité pourrait être considérablement Entladungen (ESD). La loro longevita potrebbe essere fortemente ridatta
écourtée par le fait qu’aucune précaution n’est prise Unsorgfältige Behandlung bei der Reparatur in caso di non osservazione della piu grande
a leur manipulation. kann die Lebensdauer drastisch vermindern. cauzione alla loro manipolazione.
Lors de réparations, s’assurer de bien être relié au Sorgen sie dafür, das Sie im Reparaturfall Durante le riparazioni occorre quindi essere
même potentiel que la masse de l’appareil et enfiler dem Massepotential des Gerätes verbunden collegato allo stesso potenziale che quello della
le bracelet serti d’une résistance de sécurité. sind. massa dell’apparecchio tramite un braccialetto a
Veiller a ce que les composants ainsi que les outils Halten Sie Bauteile und Hilfsmittel ebenfalls resistenza.
que l’on utilise soient également a ce potentiel. über ein Pulsarmband mit Widerstand mit auf Assicurarsi che i componenti e anche gli utensili
diesem Potential. con quali si lavora siano anche a questo potenziale.

GB D
Safety regulations require that the set be restored to its original condition Bei jeder Reparatur sind die geltenden Sicherheitsvorschriften zu beachten.
and that parts which are identical with those specified be used. Der Originalzustand des Gerats darf nicht verandert werden.
Fur Reparaturen sind Original-Ersatzteile zu verwenden.

NL I
Veiligheidsbepalingen vereisen, dat het apparaat in zijn oorspronkelijke Le norme di sicurezza esigono che l’apparecchio venga rimesso nelle
toestand wordt terug gebracht en dat onderdelen, identiek aan de condizioni originali e che siano utilizzati pezzi di ricambiago idetici a quelli
gespecifieerde worden toegepast. specificati.

“Pour votre sécurité, ces documents F

doivent être utilisés par des
spécialistes agrées, seuls habilités à Les normes de sécurité exigent que l’appareil soit remis a l’état d’origine et
réparer votre appareil en panne.” que soient utilisées les pièces de rechange identiques à celles spécifiées.

LASER SAFETY
This unit employs a laser. Only a qualified service person should
remove the cover or attempt to service this device, due to
possible eye injury.
CAUTION-CLASS 2 VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. DO NOT STARE INTO THE BEAM.
VAROITUS-LUOKAN 2 NÄKYVÄÄ JA NÄKYMÄTÖNTÄ
LASERSÄTEILYÄ AVATUNA. ÄLÄ TUIJOTA SÄTEESEEN.
VARNING-KLASS 2 SYNLIG OCH OSYNLIG
LASERSTÅLNING VID ÖPPNING. STIRRA EJ NI I STRÅLEN.
ADVARSEL-KLASSE 2 SYNLIG OG USYNLIG LASERSTRÅLING
VED ÅBNING. SE IKKE IND I STRÅLEN.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE

OF PROCEDURE OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

AVOID DIRECT EXPOSURE TO BEAM

WARNING

The use of optical instruments with this product will

increase eye hazard.
Repair handling should take place as much as possible with
a disc loaded inside the player

WARNING LOCATION: INSIDE ON LASER COVERSHIELD

CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM
ADVARSEL SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING UNDGÅ UDSÆTTELSE FOR STRÅLING
ADVARSEL SYNLIG OG USYNLIG LASERSTRÅLING NÅR DEKSEL Å PNES UNNGÅ EKSPONERING FOR STRÅLEN
VARNING SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD BETRAKTA EJ STRÅLEN
VARO! AVATT AESSA OLET ALTTIINA NÄKYVÄLLE JA NÄKYMÄTTÖMÄLLE LASER SÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN
VORSICHT SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GEÖFFNET NICHT DEM STRAHL AUSSETSEN
DANGER VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID DIRECT EXPOSURE TO BEAM
ATTENTION RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS D'OUVERTURE EXPOSITION DANGEREUSE AU FAISCEAU

100301DM

5
INSTRUCTIONS FOR HANDLING SEMI-CONDUCTORS AND OPTICAL UNIT
Electrostatic breakdown of the semi-conductors or optical pickup may occur due to a potential difference caused by
electrostatic charge during unpacking or repair work.

1. Ground for Human Body

Be sure to wear a grounding band (1 MΩ) that is properly grounded to remove any static electricity that may be
charged on the body.

2. Ground for Workbench

Be sure to place a conductive sheet or copper plate with proper grounding (1 MΩ) on the workbench or other surface,
where the semi-conductors are to be placed. Because the static electricity charge on clothing will not escape through
the body grounding band, be careful to avoid contacting semi-conductors with your clothing

<Incorrect> <Correct> Grounding Band

1MΩ

CBA
CBA

1MΩ
Conductive Sheet or
Copper Plate

6
TECHNICAL SPECIFICATIONS d
nn Audio performance Analog audio output :
Signal format : NTSC, PAL Output level : 2 Vrms (10 kΩ)
2 channels output terminal : Pin-jack, 1 set
Applicable discs /memory device :
Audio output characteristics :
(1) BD-Video disc :
(1) Frequency response
12 cm, 1 side, 1 layer; 12 cm, 1 side, 2 layers
(2) DVD-Video / DVD-Audio disc : q BD (Linear PCM) : 2Hz ~ 22kHz (48kHz sampling)
12 cm, 1 side, 1 layer; 12 cm, 1 side, 2 layers / : 2Hz ~ 44kHz (96kHz sampling)
12 cm, 2 sides, 2 layers (1 side, 1 layer) : 2Hz ~ 88kHz (192kHz sampling)
8 cm, 1 side, 1 layer; 8 cm, 1 side, 2 layers / w DVD (Linear PCM) : 2Hz ~ 22kHz (48kHz sampling)
8 cm, 2 sides, 2 layers (1 side, 1 layer) : 2Hz ~ 44kHz (96kHz sampling)
(3) Super Audio CD : : 2Hz ~ 88kHz (192kHz sampling)
12 cm, 1 layer / 12 cm, 2 layer / 12 cm, Hybrid e Super Audio CD : 2Hz ~ 40kHz
(4) Compact Disc (CD-DA) : r CD : 2Hz ~ 20kHz
12 cm, / 8 cm, disc (2) S/N ratio : 115dB
(5) Memory device : (3) Total harmonic distortion : 1kHz 0.0025%(BD)
USB memory device (4) Dynamic range : 100dB(BD)
Video output : Digital audio output : Coaxial digital output: Pin-jack, 1 set
Output level : 1Vp-p (75 Ω)
Output terminal : Pin-jack, 1 set
nn General
Component video output : Power supply : AC 120 V, 60 Hz (for U)
AC 110-240 V, 50/60 Hz (for N, S, R)
Y output level : 1Vp-p (75 Ω)
AC 220 V, 50 Hz (for K)
Pb/Cb output level / Pr/Cr output level : 0.648 Vp-p (75 Ω)
Output terminal : Pin-jack, 1 set Power consumption : 25 W (for U)
27 W (for N, S, K, R)
HDMI output :
Output terminal : 19-pin HDMI terminals, 1 set “Power Saving” ・When in Power Saving Standby : 0.3 W
HDMI ver. 1.4a ・When in Normal Standby : 0.5 W
(Deep Colour, Dolby Digital Plus, Dolby TrueHD, DTS-HD, 3D Ready) Maximum external dimensions : 440 (W) x 109 (H) x 330 (D) mm
Weight : 4.3kg
DIMENSION d

6
196
330
320
4

109
(124.5)

139
440
0.5
92.5
92

109
16.5

344

7
CAUTION IN SERVICING
Initializing BD player
Initialize the BD player when µcom, peripheral parts of µcom, or MAIN P.W.B. unit has been replaced in servicing.

1. Turn on this model's power. "NO DISC" is displayed on the FL tube.

2. Press the this model's 2 and SOUND MODE buttons simultaneously. "INITIALIZING" is displayed on the FL tube.
3. The display on the FL tube switches to "INITIALIZED", the "NO DISC" display reappears and initialization is
completed.

Note: •If step 3 does not work, start over from step 1.
•All user settings will be lost and this factory setting will be recovered when this initialization mode.
So make sure to memorize your setting for restoring after the initialization.

SOUND MODE 2

ON/STANDBY

Service tools d
Measuring Disc: CD/TCD-784
DVD/VT502 or TDV-520A
BD/ABD-520 or BLX-108
z Refer to "MEASURING METHOD AND WAVEFORMS".

When you repair the BD MECHA UNIT, you can use the following JIG.
Please order to marantz Official Service Distributor in your region if necessary.

Do not supply it : 2-Dimensional Bar Code Reader (DS6708 made by Symbol Co. etc.) : 1 Set
Do not supply it : 232C (TTL) – USB conversion jig (Model: DUT-06635 by GeeeTech): : 1 Set
Part No. :61205000300AS : 4P RE-PH CONN CORD (1000mm): : 1 Set
z Refer to "HOW TO REPLACE THE MECHA UNIT (TRAVERSE)".

8
DISASSEMBLY d
• Disassemble in order of the arrow in the following figure.
• In the case of the re-assembling, assemble it in order of the reverse of the following flow.
• In the case of the re-assembling, observe "attention of assembling".
• If wire bundles are untied or moved to perform adjustment or replace parts etc., be sure to rearrange them neatly as
they were originally bundled or placed afterward.
Otherwise, incorrect arrangement can be a cause of noise generation.

TOP COVER

FRONT PANEL ASSY REMOTE PWB UNIT FAN

Refer to "DISASSEMBLY Refer to "DISASSEMBLY Refer to "DISASSEMBLY
1. FRONT PANEL ASSY" 3. REMOTE PWB UNIT" 4. FAN"
and "EXPLODED VIEW" and "EXPLODED VIEW" and "EXPLODED VIEW"
FRONT PANEL ASSY REMOTE PWB UNIT DC FAN
(Ref. No. of EXPLODED VIEW : B) (Ref. No. of EXPLODED VIEW : 3) (Ref. No. of EXPLODED VIEW : 27)
DISPLAY PWB UNIT
(Ref. No. of EXPLODED VIEW : 6)
POWER PWB UNIT
Refer to "DISASSEMBLY
BD MAIN UNIT ASSY 5. POWER PWB UNIT"
Refer to "DISASSEMBLY and "EXPLODED VIEW"
2. BD MAIN UNIT ASSY" POWER PWB UNIT
and "EXPLODED VIEW" (Ref. No. of EXPLODED VIEW : 2)
MAIN PWB UNIT ASSY
(Ref. No. of EXPLODED VIEW : A)

About the photos used for "descriptions of the DISASSEMBLY" section

• T
 he shooting direction of each photograph used herein is indicated on the left side of the respective photograph as
"Shooting direction: ***".
• Refer to the diagram below about the shooting direction of each photograph.
• Photographs with no shooting direction indicated were taken from the top of the set.

The viewpoint of each photograph

(Shooting direction)
Shooting direction: B

Front side
［View from the top］

Shooting direction: C Shooting direction: D

Shooting direction: A

9
1. FRONT PANEL ASSY
Proceeding : TOP COVER → FRONT PANEL ASSY

(1) Detach the LOADER PANEL.

Shooting direction: B

(2) Disconnect the FFC cable.

FFC cable

(3) Lift up to unhook the claw and move in the direction of arrow to gradually pull out the assembly.

Shooting direction: C Shooting direction: D

View from the bottom

Please refer to "EXPLODED VIEW" for the disassembly method of each P.W.B included in FRONT PANEL ASSY.

10
2. BD MAIN UNIT ASSY
Proceeding : TOP COVER → FRONT PANEL ASSY → BD MAIN UNIT ASSY

(1) Disconnect the connector wires and FFC cables, then remove the screws.

JP2

FFC cable
BD MAIN UNIT ASSY

POWER PWB UNIT

CN5 FFC cable

BACK PANEL ASSY

(2) Remove the screws.

Shooting direction: A

(3) Remove the screw.

View from the bottom

11
(4 ) Remove the screws.

BD MAIN UNIT ASSY

POWER PWB UNIT

BACK PANEL ASSY

Please refer to "EXPLODED VIEW" for the disassembly method of MAIN P.W.B included in BD MAIN UNIT

3. REMOTE PWB UNIT

Proceeding : TOP COVER → REMOTE PWB UNIT

Please refer to "EXPLODED VIEW" for the disassembly method of REMOTE PWB UNIT.

4. FAN
Proceeding : TOP COVER → FAN

Please refer to "EXPLODED VIEW" for the disassembly method of FAN.

5. POWER PWB UNIT

Proceeding : TOP COVER → FAN → POWER PWB UNIT

Please refer to "EXPLODED VIEW" for the disassembly method of POWER PWB UNIT.

12
REMOVING DISCS

(1) Remove the Top Cover.

(2) Open the CD tray by turning the Drive gear counterclockwise.

Drive gear

Shooting direction: D

13
DIAGNOSTICS OF OPTICAL PICKUP g
Make failure diagnostics of the Optical Pickup as follows.
qIf the laser drive current (Iop) becomes more than BD : ± 6 [mA], DVD or CD : ±12 [mA] of the initial value, the Optical
Pickup should be replaced.
The laser drive current initial value is checked by "Iop checked Method" of next page.
wLoad five times of following disc again and playing it for one minute. It becomes the aim of the Optical Pickup
exchange when it cannot play.
BD-RE ABD-RE540W(made by ALMEDIO)
In case of replacing the Pickup, change the whole part of the BD MAIN UNIT (including the MAIN PWB UNIT) or BD
MECHA UNIT ASSY.
No mechanical adjustment is necessary after the replacement. (HOW TO REPLACE THE BD MAIN UNIT OR BD
MECHA UNIT ASSY (page 16))

Laser drive current initial value:

FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
CD :
T 2 1 : m m m m : n n n n

FL Display (The display part of 13 digits)

1 2 3 4 5 6 7 8 9 10 11 12 13
DVD : T 2 2 : m m m m : n n n n

FL Display (The display part of 13 digits)

1 2 3 4 5 6 7 8 9 10 11 12 13
BD(SL) :
T 2 3 : m m m m : n n n n

qCheck the laser drive current value wCheck the playability disc
Disc no read, unsteady playback, etc. Disc no read, unsteady playback, etc.

Laser drive current (Iop) check. ABD-RE540W disc playability check.

(Load five times of following disc)
Current value of the BD Iop is ±6[mA],
DVD or CD Iop is ±12[mA] or more the
initial value. Disc cannot play.

The BD MAIN UNIT

or the BD MECHA UNIT ASSY replacing. The BD MAIN UNIT
or the BD MECHA UNIT ASSY replacing.

14
1. Iop checked Method
Select the laser ON/OFF(CD/DVD/BD)mode of the test mode, and check the IOP value of CD laser, DVD laser or BD
laser. (Refer to "6. Test mode")
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13

T 2 L a s e r O n O f f

Laser current check

Press the 8 or 9 button to display the laser current value, and then select [X].
Check the current value of Iop (nnnn)
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13

T 2 X : m m m m : n n n n
(X=1 : CD laser mode, 2 : DVD laser mode, 3 : BD(SL) laser mode
(mmmm[mA] : Initial value, nnnn[mA] : Current value)

2. To clear the accumulated laser on time

Press the 1 button while the accumulated laser on time is displayed ("TC1, "TC2", "TC3" ) until "TC4 ＊ clear??"
appears at the display. If the 1 button is pressed, the accumulated laser on time of CD, DVD and BD is cleared
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13

T C 4 * - - c l e a r ? ?

When "TC1", "TC2" or "TC3" is selected with the 8 or 9 button, "mmmmmm" is displayed as "0" so you can check.
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13

T C Y - - - m m m m m m h
(Y=1 : CD, 2 : DVD , 3 : BD, mmmmmm : Time)

15
HOW TO REPLACE THE BD MAIN UNIT OR BD MECHA UNIT ASSY d
NOTE: The light pick-up laser diode (LD) is instantly degraded or damaged by static electricity or a power surge.
When handling the BD MECHA UNIT, always be sure to earth yourself, and use an earth mat on the
workbench and floor for grounding.

• BD MECHA UNIT Replacement Conditions

If the laser amperage (Iop) exceeds the stipulated range (see the laser on/off mode in test mode (page 26)), replace the
BD MECHA UNIT ASSY or replace the BD MAIN UNIT (including the MAIN PWB UNIT). If other problems occur, replace
the BD MAIN UNIT (including the MAIN PWB UNIT).
Stipulated range: For BD, within ±6 [mA] of the initial value; for DVD/CD, within ±12 [mA] of the initial value.

• The following two parts are specified as service parts for the MECHA UNIT.
1. BD MAIN UNIT(UD5005) (including the MAIN PWB UNIT) : (Part No. : 972304000520S)
2. BD MECHA UNIT ASSY : (Part No. : 963309100070S)

1. How to Replace the BD MAIN UNIT (including the MAIN PWB UNIT)
(1) Refer to the removal procedure, and remove and replace the BD MAIN UNIT(UD5005). (see "DISASSEMBLY")
(2) Follow the firmware update procedure, and update the firmware to the latest version.
(see "VERSION UPGRADE PROCEDURE OF FIRMWARE")

2. How to Replace the BD MECHA UNIT ASSY

2.1. Devices Used
1. PC
2. 2-Dimensional Bar Code Reader (DS6708 made by Symbol Co. etc.) (Do not supply)
3. USB - 232C (TTL) conversion jig (Model: DUT-06635 by GeeeTech) (Do not supply)
4. 4P RE-PH CONN CORD (1000mm) (Part No. : 61205000300AS)
5. Write software (D&M ScanBarcode Rpower 2.16.60(KES460)_MP function.zip)

2.2. BD MECHA UNIT ASSY Replacement Overview

(1) Before replacing the BD MECHA UNIT ASSY, write all of the BD MECHA UNIT ASSY data of the unit to be replaced
onto the set.
(2) After performing (1), replace the BD MECHA UNIT ASSY.
(3) Configure the settings for the set in which the BD MECHA UNIT ASSY was replaced.

2.3. Before replacing the BD MECHA UNIT ASSY

[Preparation]
1. Set unit before replacing the BD MECHA UNIT ASSY
2. PC with write software (D&M ScanBarcode Rpower 2.16.60(KES460)_MP function.zip) installed
3. 2-Dimensional Bar Code Reader
4. USB - 232C (TTL) conversion jig
5. BD MECHA UNIT ASSY for replacement
NOTE : Be sure not to mistake the light pick-up bar code data settings with data from a different pick-up.
Writing incorrect data will cause laser degradation.

16
[Connection]
(1) Connect the PC and bar code reader.
(2) Connect the 232C (TTL) side 4P PH connector of the USB - 232C (TTL) conversion jig to the MAIN PWB UNIT
(CON601) of the set.
(3) Connect the USB side of the USB - 232C (TTL) conversion jig to the PC.

PC (USB)へ
MAIN PWB UNIT USB - 232C(TTL) conversion sig

CON601
4P RE-PH CONN CORD (1000mm)

Jumper pin : 3.3V f mark

[Writing new light pick-up data ]

• Barcode position of light pick-up unit

BD MECHA UNIT ASSY for replacement

2-Dimensional Bar Code

(The 2-dimensional bar code can be photographed

with a digital camera, and the barcode data can be
converted with a 2-dimensional barcode reader.)

View from the bottom

(1) Switch on the power on of the set before the BD MECHA UNIT ASSY is replaced.
(2) Decompress the D&M ScanBarcode Rpower 2.16.60(KES460) _ MP function.zip folder and start the "Rpower.exe".
(3) A pop-up is displayed. Click "OK".

(4) Click "OK".

17
(5) On the screen below, select "ComPort XX".
Select the USB - 232C (TTL) conversion jig port.

(6) Check "Directly".

18
(7) Click the left edge of the "Bar Code" window, and the cursor begins to flash.

Click

(8) Place the bar code reader over the bar code attached to the replacement BD MECHA UNIT ASSY.
When the reader has finished reading the barcode, the read data is displayed.
b If the 2-dimensional barcode data has already been read by the 2-dimensional barcode reader, and the converted
data obtained, copy the data from the data file, and paste it into this section.
NOTE : Be sure not to mistake the light pick-up bar code data settings with data from a different pick-up.
Writing incorrect data will cause laser degradation.

19
(9) Click Write(F2).

(10) When “Pass” changes to green, writing to the Flash ROM of the MAIN PWB UNIT is complete.

(11) Switch off the set unit power, and remove the 232C (TTL) side 4P PH connector of the USB - 232C (TTL) conversion
jig from the MAIN PWB UNIT (CON601).

20
2.4. Replace the BD MECHA UNIT ASSY
(1) Remove the old BD MAIN UNIT from the set unit (see "DISASSEMBLY").
(2) Remove the MECHA COVER.

DRIVE MECHA UNIT TOP COVER

(3) Disconnect the connector wire and FFC cable.

MAIN PWB UNIT

FFC cable

HA700

(4) Move the optical pickup to the outer circumference, remove the FFC Cable, and remove the screws.

OPTICAL PICKUP

FFC cable

21
(5) Attach the BD MECHA UNIT ASSY for replacement to the set unit. (When assembling the unit, perform the steps in
reverse order.)
(6) Check that the 45P-FFC, 9P-FFC and 5P-PH connector cords have been connected.

2.4. Configure the settings of the set that contains the new BD MECHA UNIT
(1) Check the laser amperage (see laser on/off mode in the test mode (page 26)).
Check that the values are ±6 [mA] from the initial value for BD, and ±12 [mA] from the initial value for DVD/CD.
(2) Clear the total laser usage time (see the procedure for clearing the accumulated laser on time in test mode (page
27)).
(3) Check BD, DVD, and CD media playback.
(4) If there are no problems with playback, remove the disc, press the ON/STANDBY button to switch to standby status,
and remove the AC plug from the AC socket.
(5) Attach the top cover, and this completes the replacement procedure.

22
SERVICE MODE
1. Initial setting mode
1.1. preparation
(1) Equipment used: None
(2) Unit setting: No spec other than the following procedure.

1.2. procedure
b Initialize the BD player when µcom, peripheral parts of µcom, or MAIN P.W.B. unit has been replaced in servicing.
b All user setting will be lost and its factory setting will be restored when this initialization is made. Be sure to memorize
your setting for restoring again after the initialization.
(1) Turn on this model's power. "NO DISC" is displayed on the fluorescent tube.
(2) Press the this model's 2 and SOUND MODE buttons simultaneously. "INITIALIZING" is displayed on the fluorescent
tube.
(3) The display on the fluorescent tube switches to "INITIALIZED", the "NO DISC" display reappears and initialization is
completed.

2. Firmware version check mode

2.1. preparation
(1) Equipment used: None
(2) Unit setting: No spec other than the following procedure.

2.2. procedure
b Front-end and Back-end and SYS com version check mode.
(1) Press the SETUP button on the remote controller to display the SETUP menu.
(2) Press remote contraller "3265".
(3) The version is displayed on the TV screen as follows.

General Setting

System Factory Page

Version HQ 0000xxxx
Language Version HQ 00003604,HF 00000000, MCU007
Back-end version
JVM CDCA_JVM100311_2586
Ratings Loader: CV0017 8530 Version MCUxxx
DVD Region Cod 0
Network
1 Fmt buda
SYS com version
BD Region Code
Others Reset Password Reset Fmt buda
Loader：CV00xx
Select Confirm Exit
ENTER SETUP
Front-end version

23
3. Tray lock mode j
3.1. preparation
(1) Equipment used: None
(2) Unit setting: No spec other than the following procedure.

3.2. procedure
[Setting]
(1) Pressing the 1 and 8 buttons for simultaneously, plug the AC cord into a power outlet.
(2) "TRAY LOCK" is displayed on the FL tube and tray opening/closing is invalidated.

[Cancel]
(1) Unplug this model's AC cord from the power outlet.
(2) Pressing the 1 and 8 buttons for simultaneously, plug the AC cord into a power outlet.
(3) "PLEASE WAIT" is displayed on the FL tube and tray opening/closing is enabled.
b The tray lock mode is also canceled when the product is initialized.

4. Remote lock mode

4.1. preparation
(1) Equipment used: None
(2) Unit setting: No spec other than the following procedure.

4.2. procedure
[Setting]
(1) Pressing the PURE DIRECT and 3 buttons for simultaneously.
(2) “Lock-On” is displayed on the FL tube, and operations with the remote control and the REMOTE CONTROL input
terminal on the back of the UD5005 are disabled.

[Cancel]
(1) Pressing the PURE DIRECT and 3 buttons for simultaneously.
(2) "Lock-Off" is displayed on the fluorescent tube and remote lock mode is made canceled.

5. All Lit / All Off mode for the FL tube

5.1. preparation
(1) Equipment used: None
(2) Unit setting: No spec other than the following procedure.

5.2. procedure
[Setting]
(1) Pressing the USB/DISC and 1 buttons for simultaneously, plug the AC cord into a power outlet.
If All Lit / All Off mode is set for the FL tube, the FL tube’s display area is fully lit.
(2) Press the PURE DIRECT button to switch between ‘all lit’ and ‘all off’ display.

[Cancel]
(1) Remove the power cable for 5 seconds or more to cancel All Lit / All Off mode for the FL tube.

24
6. Test mode d h
6.1. Entering the test mode
The test mode is entered by pressing the 5 and 3 buttons simultaneously, plug the AC cord into a power outlet.
When the test mode is set, the "1" and "3" indicators light.

FL tube display when test mode entered

FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
T E S T M O D E
When the test mode is set, the choice screen of the mode appears on the monitor.

6.2. Selecting the mode

・The following modes are available.
(1) Laser on/off (CD/DVD/BD) mode : T2
(2) Error rate (skew) measurement mode : T7
(3) Accumulated laser on time display mode : TC
(4) Picking up No. display mode : TG
(5) OPU Change mode : Please do not use this mode.
In the case of OPU change, please cope according to an exchange method of "2. How to Replace the BD MECHA
UNIT ASSY" (page 16).
b When choose OPU change mode and press the 1 button, press the 2 button, and please cancel a mode.
(6) Test mode cancel : TI

q When the 9 button is pressed after entering the test mode, the display switches in the order: "T2, T7, TC, TG, TI,
T2 …"
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
T 2 L a s e r O n O f f

FL Display (The display part of 13 digits)

1 2 3 4 5 6 7 8 9 10 11 12 13

T 7 E r r o r R a t e

FL Display (The display part of 13 digits)

1 2 3 4 5 6 7 8 9 10 11 12 13
T C L a s e r O n T i m

FL Display (The display part of 13 digits)

1 2 3 4 5 6 7 8 9 10 11 12 13
T G O P U N u m b e r

FL Display (The display part of 13 digits)

1 2 3 4 5 6 7 8 9 10 11 12 13
O P U C h a n g e

FL Display (The display part of 13 digits)

1 2 3 4 5 6 7 8 9 10 11 12 13
T I T e s t E x i t

w When the 8 button is pressed, the display switches in the opposite order from q above, starting from the current
position (for example, if currently at "TC", it switches as follows: "T7, T2 ").

25
6.3. About each mode
・With the mode selected, press the 1 button to set that mode.

(1) Laser on/off (CD/DVD/BD) mode

Press the 8 or 9 button to select [X] and press the 1 button to set it.
Laser on/off control is executed and the laser current is displayed.
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
T 2 X : m m m m : n n n n
(X=1 : CD laser mode, 2 : DVD laser mode, 3 : BD(SL) laser mode)
(mmmm[mA] : Stored data, nnnn[mA] : Current value)
b W
 hen the current value is more that BD: ±6[mA], DVD or CD: ± 12[mA] of saved data, it becomes the pickup
transducer's target.
In this case, replace the mechanism unit.
When the 2 button is pressed, the layer above the current layer is displayed. See "6.4 Stopping the mode".

(2) Error rate measurement mode

Press the 8 or 9 button to select [YY] .
Refer to [Table 1 - Error rate details].
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
T Y Y F F F F F F F F F F
(YY : measurement mode, F : Address and error rate (When not set, "F" is displayed.)
Press the 1 button to begin error rate measurement. The address and error rate are displayed.
For a description of the displayed measurement results, see "Table 1: Error rate details".
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
T Y Y m m m m m m ｌ ｌ ｌ ｌ
(YY : selection mode [71 to 94], m : address [PBA][HEX], l : error rate [COUNT/SEC] [DEC])
(Note) CD (4x-speed) : Renewal of data is carried out for every 300 frame.
Error rate of 75 frames is displayed.
DVD (1.6x-speed) : Renewal of data is carried out for every 80ECC block.
Error rate of 8ECC block is displayed.
BD (1.6x-speed) : Renewal of data is carried out for every 136LDC clusters block.
Error rate of 8LDC clusters block is displayed.
The mode chosen when selection mode was changed into the trace execution and the 1 button was pressed is
performed from the beginning.
When the 1 button is pressed without changing selection mode, the mode under selection is performed from the
beginning.
(If the 1 button is pressed, the address corresponding to the chosen mode will be searched again.)
The pause mode is set after tracing is completed.
When the 2 button is pressed, the layer above the current layer is displayed. See "6.4 Stopping the mode".

26
(3) Accumulated laser on time display mode
Press the 8 or 9 button to select [Y] and press the 1 button to set it.
The accumulated laser on time is displayed.
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
T C Y m m m m m m h
(Y=1 : CD, 2 : DVD , 3 : BD, mmmmmm : Time(Fractions of hours are counted up one hour on the display.)
When the 2 button is pressed, the layer above the current layer is displayed. See "6.4 Stopping the mode".

---To clear the accumulated laser on time---

Press the 1 button while the accumulated laser on time is displayed ("TC1, "TC2", "TC3" ) until "TC4 ＊ clear??"
appears at the display.
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
T C 4 * c l e a r ? ?

If the 1 button is pressed, the accumulated laser on time of CD, DVD and BD is cleared.
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
T C 1 0 h
When "TC1", "TC2" or "TC3" is selected with the 8 or 9 button, "mmmmmm" is displayed as "0" so you can
check.

(4) Picking up No. display mode

Press the 8 or 9 button to switch to the pickup number display.
The pickup number is a 15-digit number, so it is displayed in two sections.
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
T G X Y Y Y Y Y Y Y Y
(X (display position) = 1 : Lower digits, 2 : Upper digits. YYYYYYYY: Pickup number)
When the 2 button is pressed, the layer above the current layer is displayed. See "6.4 Stopping the mode".

(5) Test mode cancel

A confirmation message is displayed. Press the 1 button to set, canceling the test mode.
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
T I 1 R e a l l y ?

When the 2 button is pressed, the layer above the current layer is displayed. See "6.4 Stopping the mode".

27
6.4. Stopping the mode
When the 2 button is pressed, the layer above the current layer is displayed. The relationship between the different
modes and the display of the different layers is shown on the table below.
Mode 1 layer 2 layer 3 layer
Laser on/off (CD/DVD/BD) mode T2 LaserOnOff T2X mmmm nnnn Non
Error rate measurement mode T7 Error Rate TYYFFFFFFFFFF TYYmmmmmmllll
Accumulated laser on time display mode TC LaserOnTim TCY mmmmmmh TC4* clear??
Picking up No. display mode TG OPU Number TGX YYYYYYY Non
Test mode cancel TI Test Exit TI1 Really? Non

6.5. About the OPEN/CLOSE (5)button

Even during the test mode, the tray is opened and closed when the 5 button is pressed.

6.6. Test mode detailed table

Table 1: Error rate details

Measurement Error rate display details for each media type

YY Remarks
position BD DVD CD
71 The inner BIS error detection It is invalid. It is invalid. When this is selected for DVD or CD,
circumference of signed number T71 FFFFFFFFFF display.
1-layer
72 The inner It is invalid. It is invalid. It is invalid. When this is selected for BD, DVD or
circumference of CD, T72 FFFFFFFFFF display.
1-layer
73 The inner LDC error detection PI error detection C1 error
circumference of signed number number detection number
1-layer
74 The inner It is invalid. It is invalid. C2 uncorrectable When this is selected for BD or DVD,
circumference of error number T74 FFFFFFFFFF display.
1-layer
75 The central BIS error detection It is invalid. It is invalid. When this is selected for DVD or CD,
circumference of signed number T75 FFFFFFFFFF display.
1-layer
76 The central It is invalid. It is invalid. It is invalid. When this is selected for BD, DVD or
circumference of CD, T76 FFFFFFFFFF display.
1-layer
77 The central LDC error detection PI error detection C1 error
circumference of signed number number detection number
1-layer
78 The central It is invalid. It is invalid. C2 uncorrectable When this is selected for BD or DVD,
circumference of error number T78 FFFFFFFFFF display.
1-layer
79 The outer BIS error detection It is invalid. It is invalid. When this is selected for DVD or CD,
circumference of signed number T79 FFFFFFFFFF display.
1-layer
80 The outer It is invalid. It is invalid. It is invalid. When this is selected for BD, DVD or
circumference of CD, T80 FFFFFFFFFF display.
1-layer
81 The outer LDC error detection PI error detection C1 error
circumference of signed number number detection number
1-layer
82 The outer It is invalid. It is invalid. C2 uncorrectable When this is selected for BD or DVD,
circumference of error number T82 FFFFFFFFFF display.
1-layer
83 The inner BIS error detection It is invalid. It is invalid. When this is selected for DVD or CD,
circumference of signed number T83 FFFFFFFFFF display.
2-layer

28
 Measurement Error rate display details for each media type
YY Remarks
position BD DVD CD
84 The inner It is invalid. It is invalid. It is invalid. When this is selected for BD, DVD or
circumference of CD, T84 FFFFFFFFFF display.
2-layer
85 The inner LDC error detection PI error detection It is invalid. When this is selected for 1-layer DVD
circumference of signed number number or CD, T85 FFFFFFFFFF display.
2-layer
86 The inner It is invalid. It is invalid. It is invalid. When this is selected for BD, DVD or
circumference of CD, T86 FFFFFFFFFF display.
2-layer
87 The central BIS error detection It is invalid. It is invalid. When this is selected for DVD or CD,
circumference of signed number T87 FFFFFFFFFF display.
2-layer
88 The central It is invalid. It is invalid. It is invalid. When this is selected for BD, DVD or
circumference of CD, T88 FFFFFFFFFF display.
2-layer
89 The central LDC error detection PI error detection It is invalid. When this is selected for DVD 1-layer
circumference of signed number number or CD, T89 FFFFFFFFFF display.
2-layer
90 The central It is invalid. It is invalid. It is invalid. When this is selected for BD, DVD or
circumference of CD, T90 FFFFFFFFFF display.
2-layer
91 The outer BIS error detection It is invalid. It is invalid. When this is selected for DVD or CD,
circumference of signed number T91 FFFFFFFFFF display.
1-layer
92 The outer It is invalid. It is invalid. It is invalid. When this is selected for BD, DVD or
circumference of CD, T92 FFFFFFFFFF display.
1-layer
93 The outer LDC error detection PI error detection It is invalid. When this is selected for DVD 1-layer
circumference of signed number number or CD, T93 FFFFFFFFFF display.
1-layer
94 The outer It is invalid. It is invalid. It is invalid. When this is selected for BD, DVD or
circumference of CD, T94 FFFFFFFFFF display.
1-layer
* The inner circumference of the layer refers to the physical inner circumference for DVD parallel, the physical outer
circumference for the opposite case.
* The inner circumference of the layer refers to the physical outer circumference for DVD parallel, the physical inner
circumference for the opposite case.

29
VERSION UPGRADE PROCEDURE OF FIRMWARE d
You can update by downloading the latest firmware from the Internet.

1. Update from the Internet

1.1. preparation
(1) System Requirement
• Internet Connection by Broadband Circuit
• Modem
• Router
• Ethernet cable (CAT-5 or greater recommended)

(2) Setting
Internet
Computer

Modem LAN port/Ethernet connector

To WAN port
Router

To LAN port
To LAN port

NETWORK
connector

1.2. Check for Update and Update

Check if the latest firmware exists. You can also check approximately how long it will take to complete an update.
(1) Press the SETUP button on the remote control to display the GUI menu.
(2) Use the cursor buttons to select "General Setting" → "System" → "Firmware Update" → "Update check".
(3) Press the ENTER buttom.
• The latest version of the firmware uploaded to the web is displayed.
• If the latest firmware version is on the web, proceed to (4).
• If the latest firmware is already installed, press the 8 button to return to SETUP menu.
(4) Use the Cursor buttons to select "Update", then press the ENTER button.
• When updating is completed, return to normal status about 20 seconds later.

--- Cautions on Firmware Update ---

• In order to update the firmware, you must have the correct system requirements and settings for a broadband Internet
connection.
• Do not turn off the power until updating is completed.
• Once updating starts, normal operations on this unit cannot be performed until updating is completed. Also, setting
items of the GUI menu of this unit or setting items of the image adjustment may be initialized.
Note down of the settings before updating, and set them again after updating.

30
TROUBLE SHOOTING
1. POWER UNIT
The power cannot be turned on.

Defect of primary circuit component.

・[BD1] (RBV1506)
・[IC1] (STR-W6753)
Check the FUSE condition. N.G. ・[U5] (STR-A6059H)
・FUSE [F101] ・[T1] (EER28(SW_TRANS))
・[T2] (EI16(SW_TRANS))

and other circuits.

O.K.

Check parts and soldering.

Check 5.5V_STBY output. ・[U5] (STR-A6059H)
・Voltage check. N.G. ・[T2] (SW_TRANS)
5.5V DC (non-switched) voltage is O.K.? ・[U6] (PC817)
(JP2 #13) ・[U8] (TL431)
※ 5.5V±5%
and other circuits.

O.K.

Check AC_DET signal output. Check parts (surrounding) and soldering.

N.G. ・[D11/D12] (IN4007)
(JP4 #1)
(AC50Hz 50Hz(5.5Vp-p)) ・[U4] (PC817)
(AC60Hz 60Hz(5.5Vp-p))
and other circuits.

O.K.

Check Ps_On input. Check parts (surrounding) and soldering.

(JP4 #2) ・[JP4] (15PIN/FFC/1.0mm)
※ Press the <ON/STANDBY> button to check. N.G. MAIN UNIT
・[U16] (CS8966F-PQFP447)
Normally +3.3V is output.
※ OK if +3.3V is output even momentarily. and other circuits.

O.K.

Check parts (surrounding) and soldering.

・[Q6/Q7] (DTS114EUA)
Check ON of MEIN　SMPS N.G.
・[U2/U7] (PC817)
・Is [Q6/Q7] switched?
and other circuits.

O.K.
Check parts (surrounding) and soldering.
Check +12V output. ・[IC1] (STR-W6753)
N.G. ・[T1] (EER28(SW_TRANS))
・Voltage check.
+12V DC (non-switched) voltage is O.K.? ・[U1] (PC817)
・[U3] (TL431)
（JP5 #1）
・[D8] (FMEN-210A)
O.K. and other circuits.

Check +5V_A output.

・Voltage check. N.G. Check parts (surrounding) and soldering.
+5V DC (non-switched) voltage is O.K.? ・SUB POWER UNIT is fault.
・（JP2 #5）

O.K.

END

31
 2. DISPLAY UNIT
2.1. FL TUBE doesn't light.

Check parts (surrounding) and soldering.

N.G. ・[U3] (MR-6625UYB)
POWER UNIT
Check ±F output.（4.8V）
・[T1] (EER28(SW_TRANS))
(J1 #14-#16)
・[D19] (FR307)
※ 4.32V ～ 5.28V
・[J1] (20x1/W/HOUSING)

and other circuits.

O.K.
Check parts (surrounding) and soldering.
・[U5] (PT6302)
Check -32V output. POWER UNIT
N.G. ・[T1] (EER28(SW_TRANS))
・Voltage check.
-32V DC (non-switched) voltage is O.K.? ・[D4] (FR107)
(J1 #12) ・[J1] (20x1/W/HOUSING)

and other circuits.

O.K.

Check parts (surrounding) and soldering.

Check VCC_3.3V output.
N.G. ・[U5] (PT6302)
・Voltage check.
・[J1] (20x1/W/HOUSING)
3.3V DC (non-switched) voltage is O.K.?
(J1 #18)
and other circuits.

O.K.

Check parts (surrounding) and soldering.

・[U5] (PT6302)
・[U3] (MR-6625UYB)
・[J1] (20x1/W/HOUSING)
POWER UNIT
・[JP3] (20PIN/FFC/1.0mm)
・[JP4] (15PIN/FFC/1.0mm)
MAIN UNIT
・[U100D] (MT8530_DDR2)

and other circuits.

O.K.

END

32
 3. MAIN UNIT
3.1 Video out doesn't output.

Check soldering.
Check the input signal to [U18]. N.G. ・U18 (NJM2566AV) and surrounding circuits.
・Y6 (U18_6pin) ・[C544]
・[R567][R571]

O.K. Check the power supply and control signal for [U18].
・+5V_AV (U18_3pin)
・V_MUTE (U18_1pin)
Check the output signal to [U18]. N.G. Check soldering.
・VOUT (U18_27pin) ・U18 (NJM2566AV) and surrounding circuits.
・[R572][R573]
・[C32]
O.K. ・[J861]

Replace the MAIN UNIT.

3.2. Component out doesn't output.

Check the input signal to [U18]. Check soldering.

・Y2 (U18_10pin) N.G. ・U18 (NJM2566AV) and surrounding circuits.
・Y3 (U18_14pin) ・[C541][C542][C543]
・Y1 (U18_16pin) ・[R580][R587][R588][R591][R592][R595]

O.K. Check the power supply and control signal for [U18].
・+5V_AV (U18_3pin)
Check the output signal from [U18]. ・COMP_MUTE (U18_15pin)
・YOUT (U18_23pin) N.G.
Check soldering.
・PBOUT (U18_21pin) ・U18 (NJM2566AV) and surrounding circuits.
・PROUT (U18_18pin) ・[R557][R558][R562][R563][R568][R569]
・[C29][C30][C31]
O.K. ・[J861]

Replace the MAIN UNIT.

33
 3.3. Analog audio doesn't output.

Check the power supply voltage for [U801]. N.G.

・+12V (U801_8pin +11V Upper) Check the POWER UNIT.
・-12V (U801_4pin -12V Low）

O.K.

N.G. Check the input and output voltage for [U702].

Check the power supply voltage for [U802].
Check soldering.
・+5V(U802_11pin)
・U702(NJM78M05)/CE20/C88

O.K.

Check soldering.
Check the audio output for [U801]. N.G. ・[U801][C539][R967][R963][C967][R956][R964]
・Lch(U801_1pin)
[C964][C540][R968][R965][C968][R966][R957]
・Rch(U801_7pin)
[C965]

O.K.

Check the digital input siginal for [U802].

・AOMCLK (U802_5pin) Mater Clock N.G.
・AOSDATA0 (U802_6pin) Digital Data
・AOBCK (U802_7pin) Bit Clock
・AOLRCK (U802_8pin) LR Clock

O.K.
O.K.
Replace the [U802].

Replace the MAIN UNIT.

Check the cathode voltage for [D5] (2pin). N.G. Check the mute control signal and ZERO Detect
・Reproducing : -6V (Low) signal for U802(DAC) (H: Zero Detect).
・MUC_AMUTE (Low)
・MT8530_AMUTE(Low)
O.K. ・U802_16pin(Low)
Check soldering.
Replace the [J861]. ・[Q21][D866][Q12][Q18][Q16][Q13]

34
 3.4 Digital Out(COAX) doesn't output.

Check soldering. N.G. Correction of sordering.

・[C868][R868][R866][Q211][R862][R864][R863]
Check the POWER UNIT.
・[R869][FB861]

O.K.

Check the output signal. N.G.

Replace the MAIN UNIT.
・[FB861] Check the digital signal for 3Vpp.

O.K.

Replace [C868][R868][R866][Q211][R862][R864]
[R863][R869].

3.5. Ether is not connection.

Check the input signal for [U901]SMSC8710. N.G.

Replace the MAIN UNIT.
・Check the power supply voltage. Check the POWER UNIT.

O.K.

N.G.
Check the output signal for [U901]SMSC8710. Replace the MAIN UNIT.

O.K.

Check soldering for [D23]/[P900].

35
MEASURING METHOD AND WAVEFORMS
1. VIDEO section
To check the waveforms(VIDEO) on the MAIN UNIT, the GND (-) probe to "tCE30" point.
Measuring Disc: VIDEO/BLX-104 (Blu-ray disc)
Playback Content : Title 1 , chapter 1 Color Bar 100% (Main Menu → 59.94Hz 1080i 1.Video signal → 1.Color Bar 100%)
Component output resolution : 1080i
(It is better to use wires for extending between the probe and test points.)
Since there are no test points for locations q to r, confirm the signals at the land of a chip resistor.

MAIN UNIT : TEST POINT AND WAVEFORMS

Detail A

4 3

tGND 1 2

qU18 (NJM2566)_Video out_signal

Component side

qVideo out_signal

w-rU18 (NJM2566)_Component out_Y/Cb/Cr signal

wComponent out_Y signal

eComponent out_Cb signal

rComponent out_Cr signal

36
Terminal output check

Signal: Color Bar 100%

UD5005 Oscilloscope
75ohm Load

Video out terminal check

Video out_signal

Component out terminal check

Component out_Y signal

Component out_Cb signal

Component out_Cr signal

37
Personal notes:

38
BLOCK DIAGRAM

BD Core Block (F/E, B/E)

MAIN PWB Video Block

MPEG DECORDER
BD / DVD / CD [MT8530] VIDEO OUT
DRIVE UNIT VIDEO
DRIVER
FE CONT BD+ GUI [NJM2566AV]
BD / DVD / CD COMPONENT OUT
Mecha
RF Signal
AACS CPPM CPRM

Pick up FE
EXPANDER Re-Encode
FFC [HD Audio decode] HDMI OUT
[DD] [DTS]
[AM2158]
Spindle [Bass Management]
Motor FE SPDIF SPDIF
DIGITAL OUT
DRIVER
CLOSED
FFC

Sled VIDEO CONT CEC Audio Block

CAPTION
(Steping) [R2A30209S]
Motor
Ethernet I2S I2S AUDIO DAC
OPAMP MUTE 2CH AUDIO OUT
[PCM1781]

KEY CONT FL DRV

tray 10/100
25M Ethernet
27M ETHERNET
Transciever
PH

MII MII
[SMSC8710]
USB
25M
Ethernet Block

I2C
1Gbits DDR2 SDRAM

SYS u-com [CS8966F]

1Gbits DDR2 SDRAM
IR/REMO BE CONT

ON/ST POWER
1Gbits DDR2 SDRAM

1Gbits DDR2 SDRAM

Regulator FAN

PH
8Gbits NAND FLASH 11.0592
EEPROM
M
USB

FFC FFC PH PH

Main Power Block

to POWER PWB from POWER PWB
POWER PWB
INLET

Standby
AC

SMPS
from POWER PWB
PH

to MAIN PWB

Wired Remote Block Display Block

SMPS(+12V) Sub Power FFC PH FFC
REMOTE PWB DISPLAY PWB STANDBY-SW PWB
B to B
FFC

from MAIN PWB

IR FL
BUTTON SW
MODULE DRIVE
BUTTON SW
LED
FFC

to DISPLAY PWB FL
RC-5 I/O WIRED REMOTE
TUBE

USB

39
WIRING DIAGRAM

DISPLAY UNIT 16P

STANDBY-SW UNIT

J3
J2
BtoB

J1 J4

F-9332H
SUB POWER DRIVE MECHA UNIT
UNIT
20P
5P
JP1 JP2 FFC
PH-PH
P1.0

9P 14P 9P FFC 47P FFC

5P PH
BtoB BtoB P1.0 P0.5

JP5 JP6 JP3 HA700 J700 HA600

JT10
15P
J405
MAIN UNIT
JP4

FFC
P1.0

POWER UNIT
J407
JP2

13P
PH-PH

CN5 J306

12P
2P
FFC
PH
P1.0

J1

FAN REMOTE UNIT

JP1
AC INLET

40
PRINTED WIRING BOARDS
MAIN (COMPONENT SIDE) MAIN (FOIL SIDE)

1 2 3 4 5 6 7 8 8 7 6 5 4 3 2 1

A A

B B

C C

D D

E E

F F

G G

H H

I I

J J

K K

鉛フリー半田
半田付けには、鉛フリー半田 (Sn-Ag-Cu) を使用してください。

Lead-free Solder
When soldering, use the Lead-free Solder (Sn-Ag-Cu).

41
DISPLAY (COMPONENT SIDE) USB (COMPONENT SIDE)

1 2 3 4 5 6 7 8 9 10 11 12 1 2

A A

POWER (COMPONENT SIDE)

1 2 3 4 5 6 7 8 9 10 11 12 13

鉛フリー半田
G
半田付けには、鉛フリー半田 (Sn-Ag-Cu) を使用してください。

Lead-free Solder
When soldering, use the Lead-free Solder (Sn-Ag-Cu).

42
DISPLAY (FOIL SIDE) d USB- (FOIL SIDE)

12 11 10 9 8 7 6 5 4 3 2 1 1 2

A A

POWER (FOIL SIDE)

13 12 11 10 9 8 7 6 5 4 3 2 1

鉛フリー半田 G
半田付けには、鉛フリー半田 (Sn-Ag-Cu) を使用してください。

Lead-free Solder
When soldering, use the Lead-free Solder (Sn-Ag-Cu).

43
REMOTE (COMPONENT SIDE) REMOTE (FOIL SIDE)
1 2 3 4 5 6 6 5 4 3 2 1

A A

B B

C C

D D

STANDBY-SW (COMPONENT SIDE) STANDBY-SW (FOIL SIDE)

1 2 3 4 5 6 7 7 6 5 4 3 2 1

A A

B B

C C

SUB POWE (COMPONENT SIDE) SUB POWE (FOIL SIDE)

1 2 3 4 4 3 2 1

A A

B B

鉛フリー半田
C C
半田付けには、鉛フリー半田 (Sn-Ag-Cu) を使用してください。

Lead-free Solder
When soldering, use the Lead-free Solder (Sn-Ag-Cu).

44
 1 2 3 4 5 6 7 8
R15 R14

R17 12k/1% 560/1% JP3

R16 1.5k 47k 20PIN/FFC/1.0mm

R22
U1A 3.3k/1% LED_A 1
C44 LED_A
LED_B 2
1 2 0.1uF/50V LED_B

TH1 2D22
D8
FMEN-210A
R1
1.5k PC817 !
U3 TL431
L1
W_REMOTE 3 W_REMOTE A
VIN T1 ! 3 3uH/5A L2 3uH/2A IR 4 IR
2 9 10 2 +12V MOTOR+12V 0.5A(Peak 2A) C40
5.5V_STBY 5
T
1
1

+ + C2 C3 + ZD1 + C11 5V_STB

BD1 ! C1 C5 C13 C9 C10 15V/2W NC 104 KEY_INA 6 KEY_INA
!
+

RBV1506 R2 C4 2200uF/25V 2200uF/25V 1uF 1uF 1000uF/25V 0.1uF 0.1uF C15 D10
+ 33k/2W 10nF/1kV NC(100uF/16V) NC VFD_STB 7
C8 11 12 VFD_STB
2 3
180uF/400V GND 8
Φ22×35mm D3 ZD3 GND
L-
L+

FR107 C16 + C12 C14 C24 NC C30 + C25 VFD_CLK 9

-

1000uF/16V 1uF NC NC 470uF/16V NC VFD_CLK

4 GND 10
4

Q6 D7 ZD5 L4 GND
R5 R6 VCC R59
D5 FR107 DTA114EUA 13 NC -12V VFD_DATA 11
! ! U1B 2 1 8 4uH/0.5A C39 VFD_DATA

4
2M 2M
+ RK36 -32V 12
R4 R11 -32V

3
R30 D20 C21 + C23 + C33 C6 15V/2W
! ! ! PC817 ! NC C17 FR107 22R/1/8W 100uF/63V NC C22 NC NC ZD10 104 GND 13
2M 2M

2
47uF/50V R3 Q3 100uF/63V C38 GND
D4
! ! IC1 6 NC NC -F 14 -F
C19 470pF/250V/Y1 STR-W6753 R7 14 3 1 R43 -32V 0.05A

3
470pF/250V/Y1 1k 2.2R 1/4W 104 C7 GND
B
1 15

4
C18 C20 + ZD7 R23 R25 R42 C37 GND
1000pF/1kV R66 C52 FR107 JAMP MTZJ3.6/1W +F 104 16
D

NC
+F

VCC
C35 ZD2 NC 47uF/50V D6
FR107 JMP13 0 1.8k 1.8k 1.8k 104 GND 17
OCP/BD

SS/OLP
5.6V/0.5W GND
!
S/GND

0.22uF/275V 6 15 -F 0.14A
FB 3.3V 18 3.3V
R9 R8 220uF/10V C32 L5 100uF/10V ZD6 C36

4
4 3 1k U2B 1.2k SF34 C31 NC 4uH/0.5A C34 NC NC KEY_INB 19
3

5
KEY_INB

3
+ +
PC817 16 +F 0.14A
L6 ! STBY_KEY 20 STBY_KEY
50mH/1.5A + C72
<Designator> ! C26 C28 EER28
1 2 470pF/50V NC 100nF/100V

R10 C27
NC 2.2uF/50V

C42 C43 R12 C29 JP6 JP5

470pF/250V/Y1 0.33R/2W 6800pF/50V 14PIN 2.0mm 9PIN 2.0mm
470pF/250V/Y1 C69 104
D9 GND +12V
1 GND 1 +12V
! ! AC_DET
2 GND 2 +12V
R13 100/1W FR107 C71 104
C73

C
3 3
1

D11 R19 R20 R21 GND +12V

L+ 5.5V_STBY +5V_A 4 GND 4
F1 ZD4 +5V_A GND
! F2AL/250V NC IN4007 120k 120k 120k R18 56k 6.8V/2W 5 5
+5V_A GND
2

U4A U4B ZD8 R24 6 6

4
JP1 +5V_A C70 104 GND
C46 NC
1

3
NC NC(7.5V/0.5W) GND 7 -12V 7
PC817 PC817 GND -12V
1

! D12
8 GND 8
AC_IN L- ! ! GND GND
+5V_B 9 9
IN4007 ZD9 +5V_B GND
6.8V/2W 10 +5V_B
VIN T2 ! GND 11 GND
1 A+9V 12
C53 A+9V
R26
GND 13
NC NC GND JP4
A-9V 14 15PIN/FFC/1.0mm
A-9V
D13 AC_DET 1
NC JP2 AC_DET

D15
2
C41
13PIN/PH/2.0mm PS_ON 2 PS_ON D
FR107 R27 3 D14 A-9V 1 STBY_KEY 3
4.7 1/8W RK36 L8 3uH/1A A-9V C50 104 STBY_KEY
VCC D16 Q7 D17 7 5.5V_STBY 0.5A 104 GND 2 KEY_INB 4
8

C54 FR107 R31 C45 GND KEY_INB

2 1 4
15pF/1KV DTA114EUA 0? R28 A+9V 3 3.3V 5
6
D/ST

D/ST

! A+9V 3.3V
VCC

FR107 220
R29 104 GND 4 VFD_DATA 6
TO92 + R32 2K C47 GND VFD_DATA
FB/OLP
S/OCP

U5 + R38 12k/1% +5V_A 5 GND 7

! VCCP_A GND
GND

STR-A6059H C62 NC 5 9 R51

BR

47uF/50V C63 U6A C59 2k R34 0 104 6 VFD_CLK 8

1

47uF/50V R33 NC PS_ON VCCP_A VFD_CLK

! !
1

R35 0 PC817 1.5K GND 7 GND 9

U7B C56 NC U7A R36 C48 GND GND
4

1
R39 U6B EI16 C57 + + C68 PC817 10k +5V_B 8 VFD_STB 10
4

VCCP_B VFD_STB
3

2
2.2R/0.5W C64 NC C58 C55
3

10nF/50V PC817 PC817 220UF/10V R37 27k 220uF/10V 104 104 9 KEY_INA 11

2
C61 Q2 VCCP_B KEY_INA
U8 0.1uF 2SC1815 GND IR
! 3 10 12
3

C49 GND IR
MTZJ33B T77
1 MOTOR+12V 11 W_REMOTE 13
1

1
R41 U2A M12V W_REMOTE
2
10k 1% PC817 R40 104 MGND LED_B

E
12 14
2

C66 TL431 10K C65 C51 MGND LED_B

! 5.5V_STBY 13 LED_A 15
0.1uF 5.5V_STBY LED_A
1000pF/250V 104
Q5
2

2SC1815 R55 10K

! 3

R56
1

10k 1% C60
0.1UF

F
d SCHEMATIC DIAGRAMS (1/17)

45
 1 2 3 4 5 6 7 8

UD5005:0ohm
D1
1SS355

JP1 IC3
9110S-09L
A
NJM7809DL1A

3
+12V 1

2
2

100/16V

1SS355
+12V

C20
C18

C19

D2
L1 L2
+12V 3 FBJ1608HS280NT FBJ1608HS280NT

4 D5
GND
R19
1SS355
GND 5
IC1 NC
6 MP2208 R8
GND
C1 1 14 R2
7 AGND FB
91K 1%
-12V 1000P 0
C2 C7 2 13 R3

C9

NC
499K 1%
GND 8 SS EN/SYNC
0.01u 100K
0.01u

R5
C3 3 12
GND 9
0.1u
PGND1 PGND2 MP2208
B

NC
R9
C4 D7 4 11 L3 L4
SW SW
47/16 3.3uH
C5 1SS355 5 10 FBJ1608HS280NT
IN1 IN2
47/16 R4 L5
C6 6 9

1.8K
R6
NC POK
FBJ1608HS280NT

0.01u

1000P
22/16

4.7u

4.7u

0.1u
7 8 100K

22u

22u
BS Vcc

C11

C12

C13

C14

C15

C16

C17
4.7V
ZD1
C10

R7
NC
R1 C8 0.47[B]

0 0.1u[Z]

UD5005:0ohm D3
1SS355
IC4
NJM79M09DL1A
JP2

3
9110S-14L

100/16V

1SS355
GND 1

C40
C38

C39

D4
L6 L7
FBJ1608HS280NT FBJ1608HS280NT
GND 2
D6
GND 3

+5V_A 4
1SS355
NC
D
R20
+5V_A 5 IC2
MP2208 R17
+5V_A 6 C21
1000P
1
AGND FB
14 R11
0
91K 1% UD7006 only
C27 2 13

C29
GND 7 C22 R12

NC
499K 1%
SS EN/SYNC
0.01u 100K

R14
GND 8 C23 0.01u 3 12
PGND1 PGND2 MP2208

R18
0.1u

NC
+5V_B 9 C24 D8 4 11 L8 L9
SW SW
47/16 3.3uH
C25 1SS355 5 10 FBJ1608HS280NT
+5V_B 10
IN1 IN2
47/16 R13 L10
C26 6 9
1.8K

GND 11
R15

NC POK
FBJ1608HS280NT

0.01u

1000P
22/16

4.7u

4.7u

0.1u
7 8 100K
E
A+9V 12

22u

22u
BS Vcc

GND 13

A-9V 14 C31

C32

C33

C34

C35

C36

C37
R16

DZ2

47V

C30
NC

R10 C28 0.47[B]

0 0.1u[Z]

F
d SCHEMATIC DIAGRAMS (2/17)

46
 1 2 3 4 5 6 7 8

SG35

SG34

SG33

SG32

SG31

SG30

SG29

SG28

SG27

SG26

SG25

SG24

SG23

SG22

SG21
GR1
MR-6625UYB
J1
U3
20 STBY_KEY V+VFD 1
KEY_IN_B F+
19 2
18
17
VCC_3.3V 3
4
NX
NP A
V+VFD GR12 NP

32

31

30

29

28

27

26

25

24

23

22

21

20

19

18

17
16 5 12G
15 GR11 6
V-VFD GR10 11G
14 7

SG35

SG34

SG33

SG32

SG31

SG30

SG29

SG28

SG27

SG26

SG25

SG24

SG23

SG22

SG21
10G

GR1
13 C12 LED1 C13 LED2 GR9 8
-32V NC ON/STANDBY NC FL OFF GR8 9G
12 9 8G
11 R5 100R VFD_DATA GR7 10
GR6 7G
10 11 6G
9 R7 100R VFD_CLK GR5 12
GR4 5G
8 13 4G
7 R8 100R VFD_STB R9 R10 16 SG20 GR3 14
KEY_IN_A 2.7k 3.3k GR2 SG20 GR2 3G
6 33 GR2 15 2G
5 5V_STBY 15 SG19 GR1 16
IR_IN GR3 SG19 GR13 1G
4 34 GR3 17 13G

3
3 W_REMOTE 14 SG18 GR14 18
LED_B GR4 SG18 GR15 14G
2 R3 220R Q1 Q2 35 GR4 19 15G
1 R2 220R LED_A 1 1 SG17 13 SG17 20 NC
DTC114EUA DTC114EUA GR5 36 21
GR5 SG16 NC
SG16 12 22 NC
B
20x1/W/HOUSING GR6 37 U5 SG1 23
SOT23 SOT23 GR6 SG15 SG2 P1
11 24

2
GR7 SG15 SG3 P2

2
38 GR7 25 P3
10 SG14 SG4 26
GR8 SG14 SG5 P4

GR9
39 GR8 PT6302 SG13 9 SG13 SG6
SG7
27
28
P5
P6
40 GR9 29 P7
8 SG12 SG8 30
GR10 SG12 SG9 P8
41 GR10 31 P9
7 SG11 SG10 32
GR11 SG11 SG11 P10
42 GR11 33 P11
6 SG10 SG12 34
GR12 SG10 SG13 P12
43 GR12 35 P13
5 SG9 SG14 36
GR13 SG9 SG15 P14
44 GR13 37 P15
4 SG8 SG16 38
GR14 SG8 SG17 P16
45 GR14 39 P17
3 SG7 SG18 40
GR15 SG7 SG19 P18
46 GR15 41 P19
2 SG6 SG20 42
SG6 SG21 P20
47 43
C
GR16 SG5 SG22 P21
SG5 1 44 P22
IR_IN -32V 48 SG23 45
VEE P23
3

SG24 46
C6 R13 Q4 CB2 SG25 P24
U4 47
390pF/NC 10k/NC 0.1uF SG26 P25
1 1 48
DTA114EUA 2 IR SG27 P26
49

RSTB

CLKB
OSCI

OSCO
GND P27

VSS

CSB

DIN

VDD

AD2

AD1

SG1

SG2

SG3

SG4
3 SG36 50

P1

P2
VCC SG35 P36
51 P35
SOT23 OPTO R34ES9A SG34 52

49

50

51

52

53

54

55

56

57

58

59

60

61

62

63

64
2

SG33 P34
R19 53 P33
R4 NC LD1 SG32 54
360R W_REMOTE SG31 P32
55 P31
5V_STBY SG30 56
R20 SG29 P30
57 P29
R18 100R + CE3 C7 CQX15/TO NC SG28 58
100uF/10V C8 P28
0.1uF 59

VFD_DATA
NP

VFD_STB

VFD_CLK
0.01uF 60 NP
61 NX

SG36
R6 V-VFD

SG1

SG2

SG3

SG4
62 F-

D
3.3K

L1 FB/0805 VCC_3.3V
33pF
C2 R1
47K CE1
CB1 + C3
1000pF 100uF/10V 0.1uF/16V
1uF
C1
(Marantz)SOUND MODE
HDMI RESOLUTION

(Marantz)USB/DISC

USB1
5V_STBY 5V_STBY 5V_STBY L2 J4
PURE DIRECT

5 FB/0805
SHIELD
VCC 1 5 VCC
D1 D3
OPEN

PLAY

PAUSE

2 4
E
NC NC D5 D- D-
STOP

PREV

NEXT

D+ 3 3 D+
NC 4 2
KEY_IN_A KEY_IN_B STBY_KEY POWER GND GND
SHIELD 6 1 SHIELD
R36 R35
C9 R21 R22 R23 R24 R25 C10 R26 R27 R28 R29 R30 + CE4 0R 0R
0.01uF 0R/1% 2.5k/1% 6.8k/1% 15k/1% 39k/1% D4 0.01uF 0R/1% 2.5k/1% 6.8k/1% 15k/1% 39k/1% D6 4Pin_2.5mm 100uF/10V 5Pin_2mm
D2 NC 33pF C4
NC 0.1uF/16V
ON/STANDBY

K2 K3 K4 K5 K6 K7 K8 K9 K10 K11 K1 C11

PURE DIRECT

USB BOARD
SOUND MODE

0.1uF/16V
HDMI RESOLUTION

D7 D8
Schottky Diode

Schottky Diode

USB/DISC

OPEN PLAY PAUSE STOP PREV NEXT

F
STBY_KEY CoreTek

SCHEMATIC DIAGRAMS (3/17)

47
 1 2 3 4 5 6 7 8

5V_NSW
TP4
JK1
2 0.01
3 TP3 R6 0 C9
+5V_NSW_232C

1000pF
D3
Q2 OPEN
1 ZD1 R1 C10

3
KDS160

MTZJ6.2B
1K KRA104S
C3

A
D2
1
KDS160
TP2
R2
220pF TP5
C4 3.3K

2
2
3

2
R5 0
TP1 OPEN W_REMOTE
C5 1 Q1
1 0.1Z KTC3875S

0.1Z
220pF
D1 C7

3
MINI-JACK R3 R4
20482E0004 RB521S C1 C2 C8
1K 10K
C6 0.1Z OPEN

FG9

R7 R8
0
UD7006 only NC

3
R9 0
1

2
KTA1268 Q18

2
TP10 R12 0
Q13 1 AMX_POWER

FB3
DTC144E
BLM21PG221

3
C11 GND
OPEN

C12
OPEN
11

DB9 female HIN202EIEN2-T

U1 C23 + CE5
1 0.1/50V
TP8 CE2 0.22/50V 0.1Z 47uF/16v
6 +
CE1

+
FB1 BLM21PG221 1 C1+ VCC 16
2

C
7 TP9
FB2 BLM21PG221 2 V+ GND 15
3
8
3 C1- T1OUT 14
4 R15
9 CE3 + 0.22/50V
TP7 4 C2+ R1IN 13
5
0
J2 5 12 FB4 BLM21PG221 RS323C_OUT
C2- R1OUT
10

CE4 0.22/50V
R27 FB5 BLM21PG221 RS232C_IN
1000pF

1000pF

6 V- T1IN 11
ZD4

ZD3

1K
0 R17
OPEN

7 T2OUT 10
OPEN

T2IN
ZD2 OPEN

ZD5 OPEN

OPEN C15 C16 1K

OPEN

OPEN

C13 R16 8 R2IN 9

C18 R2OUT W405
C19
TP6 OPEN
C14 C21 100pF
GND_REN0 1
2
C22 1000pF 3
4

C20 0.01 FG9 M3-SITE

J1
S401 SW
1
W_REMOTE 12
2 IR_RC_EN 11
IR_RC_IN 10
3 GND
RS232C_IN
9
8
Destination Setting
R10 RS323C_OUT 7
JK3 5V_NSW 6 Reference UD5005 UD5005 UD5005 UD5005 UD5005 UD5005 UD5005
AMX_POWER 5
GND OPEN MCU_SET1 4 No. U1B N1B N1SG R1B S1B S1SG K1B
MCU_SET2
5
MCU_SET3
3
2 R10 NC NC NC NC NC NC NC
4 FG9
C25
GND
5V_NSW 5V_NSW
1 R19 NC NC NC NC NC NC NC
0.1uF
C1608/SMD
R20 NC NC NC 0 0 0 NC
R21 NC NC NC NC NC NC NC
E
3 R23 R25 R19 R21 12FMN-BTK-A
IN
MCU_SET4

GND 12FMN-BTK-A
R22 NC 0 0 NC 0 0 NC
OUT 2
R23 NC NC NC NC NC NC NC
R24 0 0 0 0 0 0 0
NC NC NC NC NC NC NC
1

R24 R26 R20 R22 R25

AV2-8.4-9/PB R26 NC NC NC NC 0 0 0
J

R18 C24
47 GND GND

R1608/SMD 0.1uF
C1608/SMD

GND

F
d SCHEMATIC DIAGRAMS (4/17)

48
 1 2 3 4 5 6 7 8

A_KEY_IN 100 R371 BLM15P FB27 KEY_IN_A

1 PWR_AC_DET W_REMOTE
W_REMOTE [13] B_KEY_IN 100 R363 BLM15P FB25 KEY_IN_B
2 PS_ON
C1032
3 STB_KEY IR_IN
IR_IN [13]
4 B_KEY_IN C1034 KEY_IN_B
KEY_IN_B [13]
5 3.3V KEY_IN_A
KEY_IN_A [13]
6 VFD_DATA

A
100pF/NC 100pF/NC
7
8 VFD_CLK
9 1.1V
10 VFD_STB VFD_STB R426 100 FB406 BLM15P VSTB
VCC_P FB3 POWER
15PIN/FFC/1.0MM

11 A_KEY_IN VFD_CLK R423 100 FB403 BLM15P VCLK

C46 0.1uF/16V BLM21P
15PIN/FFC/1.0MM

12 IR_IN VFD_DATA R424 100 FB404 BLM15P VDATA 3.3V_VDAC:below 0.2A;

13 W_REMOTE C45 0.1uF/16V
VSTB Close to DC-DC For improve video DAC SNR 3.3V_VDAC POWER
14 LED_CTRL_B VSTB [6] U2 CE2 220uF/10v/LESR
C408 C409 C410 VDATA FB8 R(dc)max <= 0.02 OHM VCC

+
15 LED_CTRL_A VDATA [6] P1_GND performance
100pF/NC 100pF/NC 100pF/NC VCLK BLM18P VCC_1.1V: about 0.6A; FB5
VCLK [6] R49 10 3.3V_VDAC
VCC_1.1V 1 8 LQH6PPN2R2N43 BLM21P 1.1V 3.3V
MCU_IO_13 VCC VIN
MCU_IO_13 [13]
7 L1 FB20 BLM15P/NC
STB_KEY R425 100 FB405 BLM15P MCU_IO_13 LX U8

4
J405 R1 47K 1.1V_EN 5 EN DC Current: 4.1A 1.1V: Max 2.8A,Mean 2A; 10K
Saturation Current: 6.4A R52
1.1V_FB

CNTL
C411 FB 4 DC resistor: 15mOHM
3 C9 R2 C8 1 FB17 BLM15P
100pF/NC -2010.04.15 GND POK
2 + CE19 5.76K_1% NC + CE5 2
C44 R47 REF 22uF/10v/X5R 220uF/10v/LESR 100uF/10v/LESR EN
1 -12VA PWR_AC_DET FB408 BLM15P AC_DET
2 R5 47K 9 Vout: 0.8*(16+5.76)/16=1.088V CE7 100uF/6.3v
0.1uF/16V TP PGND 6 VOUT 6

2
3 1K C47 1.1V_FB 3 +
+12VA AC_DET VIN
4 AC_DET [13] CORE_ON# 1 Q1 0.1uF/16V CE4 R55 C35
2N3904 G5627 NC1 P1_GND R7 + C41 1.25K_1%
5
0.1uF/16V

GND
GND
6 SOP8/SMD/P1.27/G5627 16K_1% 100uF/10v 0.1uF/16V FB 7

NC
VCC_P

3
7 PS_ON R427 100 FB407 BLM15P PS_ON# R10
8 10K C48

5
9
8
9 PS_ON# P1_GND P1_GND uP7706U8 R53
VCC_P C412 PS_ON# [13]
10 30K_1%
100pF/NC R54
13PIN/PH/2.0MM

11 NC
MOTO_+12V
13PIN/PH/2.0MM

12
13 10K_1%
5V_STBY

B
LED_CTRL_A 100 R396 BLM15P FB31 MCU_LED_CTRL_A
LED_CTRL_B 100 R392 BLM15P FB28 MCU_LED_CTRL_B
C1033
J407
C1035
MCU_LED_CTRL_A
MCU_LED_CTRL_A [19] 1.8V
100pF/NC 100pF/NC MCU_LED_CTRL_B POWER
MCU_LED_CTRL_B [19] VCC C59 0.1uF/16V Close to DC-DC FB14
BLM21P
C50 0.1uF/16V 22uF/10v/X5R
CE1 22uF/10v/X5R

+
U4 P2_GND R(dc)max <= 0.02 OHM
FB7
VCC_1.8V: about 0.9A; LQH6PPN2R2N43 FB16
BLM18P
VCC_1.8V R34 10 1 8 DC Current: 4.1A BLM21P 1.8V
VCC_P VCC VIN Saturation Current: 6.4A
R36
DC resistor: 15mOHM
47K LX 7 L2
D210
1.8V_EN 5 EN
1.8V: Max 3.2A,Mean 2A;
1N4001 U9
4

10K 3.3V_STBY 4 1.8V_FB C34 FE

R56 FB
22uF/10v/X5R R37
CNTL

3 GND POWER
1 FB19 BLM18P C49 R38 2 + CE26 20K_1% C26 + CE9
POK REF
2 47K 220uF/10v/LESR NC 100uF/10v/LESR M3.3V 3.3V
EN M3.3V:below 50mA; FB9 BLM15P
0.1uF/16V 9 TP PGND 6 Vout: 0.8*(16+20)/16=1.8V
VOUT 6 C52 CE11 100uF/6.3v 1.8V_FB A3.3V
3 + 3.3V_STBY:below 0.2A; C51 A3.3V:below 0.2A; FB10 BLM15P 3.3VO
VIN R59 G5627 0.1uF/16V P2_GND NC2 R39 D3.3V
C28
C63 1.25K_1% 0.1uF/16V SOP8/SMD/P1.27/G5627 16K_1% D3.3V:below 0.1A; FB11 BLM15P
GND
GND

0.1uF/16V FB 7
NC

10uF/10v
STBY + CE8
C64 P2_GND P2_GND 100uF/10v
3.3V
5
9
8

uP7706U8 R57
30K_1% POWER

C
R58
NC

10K_1%
1.2V
VCC3IO_STB CONT A1.2V
5V_STBY 3.3V A1.2V:below 0.15A; FB12 BLM15P
VCC FB24 POWER D1.2V
3.3V_STBY 3.3V_STBY C61 0.1uF/16V BLM21P D1.2V:below 0.25A; FB13 BLM15P

C60 0.1uF/16V Close to DC-DC

U5 CE3 22uF/10v/X5R R(dc)max <= 0.02 OHM
R30 FB23 VCC_3.3V: about

+
0.6A; P3_GND
100K C21 BLM18P FB6
R31 0.01uF P Channel VCC_3.3V R73 10 LQH6PPN2R2N43 BLM21P 3.3V
1 VCC VIN 8
3

820K Rds: 20~80 OHM;

Vgs(th): -0.7V; VCC_P VCC CTL
R33 7 L3 1.1V VCC_P
Q8 3.3V R3 56K LX
2

R32 1 0/NC 3.3V_EN 5 EN DC Current: 4.1A

QM2403K Saturation Current: 6.4A
3.3V: Max 1.5A,Mean 1A;
R35 1K 1 Q9 47k 4 3.3V_FB DC resistor: 15mOHM R15 For 1.1V before
FB
2

2N3904 3 C12 R4 C10

R42 100K 1.8V/3.3V/5V;
For VCC3IO_STB delay GND 2 + CE27 49.9K_1% NC + CE29 Q4
0.1uF/16V REF
3

R23 C54 Close MT8530 10K C58 R48 22uF/10v/X5R 100uF/10v/LESR R16 QM3001S
AVDD33_LDO VCC3IO_STB 220uF/10v/LESR
10K/NC 0.1uF/16V 20K

3
2
1
9 TP PGND 6
CORE-RSTI# C66 3.3V_FB 1K R19 R20
100K
C27 0.1uF/16V R18 4 G S 0/NC 0/NC

2
10uF/10v C159 0.01uF/16V G5627 NC3 P3_GND R9
SOP8/SMD/P1.27/G5627 16K_1% 1 Q5 C17
2N3904 0.01uF D

8
7
6
5
3
P3_GND P3_GND R25
10K/NC C57

D
0.1uF/16V VCC
Vcc
2
3.3V_STBY 3.3V_STBY + CE6
470uF/16v
1 3 0.1uF/16V
C55
Reset# GND
OP
2

G691L293T71U R40
1A Regulator
10K POWER
VCC 1.2V 1.1V MOTO_+12V +12VM MOTO_+12V
VCC

VCC

uP7706U8 CONT
1.2V
Vcc U3

4
For 1.1V
POR RESET# 1 RESET# 2 POR RESET# 3 RESET#
C5
R50 POWER
OPWRSB

CNTL
before 12V R24 2 3 OPWRSB [6]
0.1uF/16V POK 1 100K
2 R26 C19 RESET#
GND

GND

G691L293T71U/NC 1 3 G691L293T73U EN Q6 RESET# [6,12]

Close to 1K 0.1uF/16V
GND Reset# 10K QM2403K
C56 3.3V CORE-RSTI#

1
VOUT 6 CORE-RSTI# [5]
U1 U19 1000pF MT8530 + CE13 C15
3

3
G691L293T73U VIN R61 C2
100uF/16v + CE12 C1 0 0.1uF/16V R28
Dual Layout
GND
GND

FB 7 220uF/16v R27 NC
NC

0.1uF/16V 22uF/10v 47K

C14
5
9
8

POWER CONT
R45 R51
OPWRSB CORE_ON# 5K_1% NC

2
R60
0 1 Q7
10K_1% 2N3904

3
E
R29
10K
C20
0.01uF

F
SCHEMATIC DIAGRAMS (5/17)

49
 1 2 3 4 5 6 7 8
U100A 1.8V U101 U102

A_DQ13 G8 M8 A_RA0 A_DQ16 G8 M8 A_RA0

A_DQ9 DQ0 A0 A_RA1 A_DQ22 DQ0 A0 A_RA1
G2 DQ1 A1 M3 G2 DQ1 A1 M3
1.8V C101 C102 C103 C104 C105 C106 C107 A_DQ8 H7 M7 A_RA2 A_DQ21 H7 M7 A_RA2
0.1uF/16V A_DQ11 DQ2 A2 A_RA3 A_DQ19 DQ2 A2 A_RA3
0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V H3 DQ3 A3 N2 H3 DQ3 A3 N2
0.1uF/16V 0.1uF/16V A_DQ14 H1 N8 A_RA4 A_DQ20 H1 N8 A_RA4
A_DQ10 DQ4 A4 A_RA5 A_DQ18 DQ4 A4 A_RA5
H9 DQ5 A5 N3 H9 DQ5 A5 N3
A_DQ12 F1 N7 A_RA6 A_DQ17 F1 N7 A_RA6
A_DQ0 A_DQ15 DQ6 A6 A_RA7 A_DQ23 DQ6 A6 A_RA7
BB18 AV16 F9 P2 F9 P2
A
VCC2IO A_DQ0 A_DQ1 A_DQ4 DQ7 A7 A_RA8 A_DQ24 DQ7 A7 A_RA8
AY18 VCC2IO A_DQ1 AW15 C8 DQ8 A8 P8 C8 DQ8 A8 P8
BB22 BC13 A_DQ2 A_DQ0 C2 P3 A_RA9 A_DQ27 C2 P3 A_RA9
VCC2IO A_DQ2 A_DQ3 1.8V A_DQ6 DQ9 A9 A_RA10 A_DQ29 DQ9 A9 A_RA10
AY22 VCC2IO A_DQ3 AU15 D7 DQ10 A10/AP M2 D7 DQ10 A10/AP M2
C108 C100 C109 AR19 BA13 A_DQ4 A_DQ5 D3 P7 A_RA11 A_DQ25 D3 P7 A_RA11
VCC2IO A_DQ4 A_DQ5 A_DQ3 DQ11 A11 A_RA12 A_DQ28 DQ11 A11 A_RA12
0.1uF/16V AY14 VCC2IO A_DQ5 AT16 D1 DQ12 A12 R2 D1 DQ12 A12 R2
0.1uF/16V 0.1uF/16V A_DQ6 A_DQ7 A_RA13 A_DQ26 A_RA13
BB14 VCC2IO A_DQ6 BA15 D9 DQ13 NC/A13 R8 D9 DQ13 NC/A13 R8
AY30 BC15 A_DQ7 C110 C111 C112 C113 C114 C115 C116 A_DQ1 B1 R3 A_DQ30 B1 R3
VCC2IO A_DQ7 A_DQ8 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V A_DQ2 DQ14 NC/A14 A_DQ31 DQ14 NC/A14
BB30 VCC2IO A_DQ8 AY20 B9 DQ15 NC/N15 R7 B9 DQ15 NC/N15 R7
AR31 AU19 A_DQ9 A2 L2 A_BA0 A2 L2 A_BA0
VCC2IO A_DQ9 A_DQ10 NC BA0 A_BA1 NC BA0 A_BA1
AY34 VCC2IO A_DQ10 BB20 E2 NC BA1 L3 E2 NC BA1 L3
BB34 AT20 A_DQ11 A_DQS0 B7 L1 A_BA2 A_DQS3 B7 L1 A_BA2
VCC2IO A_DQ11 A_DQ12 A_DQS0# UDQS NC/BA2 D_CLK0 A_DQS3# UDQS NC/BA2 D_CLK1
W35 VCC2IO A_DQ12 AW19 A8 UDQS CK J8 A8 UDQS CK J8
AL35 BC19 A_DQ13 A_DQS1 F7 K8 D_CLK0# A_DQS2 F7 K8 D_CLK1#
C117 C118 C119 C120 VCC2IO A_DQ13 A_DQ14 A_DQS1# LDQS CK A_CS# A_DQS2# LDQS CK A_CS#
AY38 VCC2IO A_DQ14 AV20 E8 LDQS CS L8 E8 LDQS CS L8
0.1uF/16V BB38 BA19 A_DQ15 1.8V 1.8V A_DQM0 B3 L7 A_CAS# A_DQM3 B3 L7 A_CAS#
0.1uF/16V 0.1uF/16V 0.1uF/16V VCC2IO A_DQ15 A_DQ16 A_DQM1 UDM CAS A_ODT A_DQM2 UDM CAS A_ODT
P40 VCC2IO A_DQ16 AV32 F3 LDM ODT K9 F3 LDM ODT K9
V40 BB32 A_DQ17 DDR_VREF J2 K7 A_RAS# DDR_VREF J2 K7 A_RAS#
VCC2IO A_DQ17 A_DQ18 A_CKE VREF RAS A_WE# A_CKE VREF RAS A_WE#
AB40 VCC2IO A_DQ18 AW31 K2 CKE WE K3 K2 CKE WE K3
AF40 BC31 A_DQ19 C121 C122 C123 C124 C125 C126 C127 C128 A1 A3 A1 A3
VCC2IO A_DQ19 A_DQ20 C123 VDD VSS VDD VSS
AK40 VCC2IO A_DQ20 BA31 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V A9 VDDQ VSSQ A7 A9 VDDQ VSSQ A7
AP40 AU31 A_DQ21 C1 B2 C1 B2
VCC2IO A_DQ21 1.8V VDDQ VSSQ 1.8V VDDQ VSSQ
AV40 AY32 A_DQ22 C3 B8 C3 B8
VCC2IO A_DQ22 A_DQ23 VDDQ VSSQ VDDQ VSSQ
P42 VCC2IO A_DQ23 AT32 C7 VDDQ VSSQ D2 C7 VDDQ VSSQ D2
C129 C130
4.7uF
C131 C132
0.1uF/16V
V42
AB42
VCC2IO
VCC2IO
A_DQ24
A_DQ25
AY36
AV36
A_DQ24
A_DQ25
A_DQ26
C9
E1
VDDQ
VDD
VSSQ
VSS
D8
E3
C9
E1
VDDQ
VDD
VSSQ
VSS
D8
E3 B
AF42 VCC2IO A_DQ26 BA37 E9 VDDQ VSSQ E7 E9 VDDQ VSSQ E7
4.7uF 0.1uF/16V A_DQ27 1.8V
AK42 VCC2IO A_DQ27 AU37 G1 VDDQ VSSQ F2 G1 VDDQ VSSQ F2
AP42 AW35 A_DQ28 G3 F8 G3 F8
VCC2IO A_DQ28 A_DQ29 VDDQ VSSQ VDDQ VSSQ
AV42 VCC2IO A_DQ29 BC37 G7 VDDQ VSSQ H2 G7 VDDQ VSSQ H2
BB42 AV38 A_DQ30 G9 H8 G9 H8
VCC2IO A_DQ30 A_DQ31 C133 C134 C135 C136 C137 VDDQ VSSQ VDDQ VSSQ
BA43 VCC2IO A_DQ31 BB36 J1 VDDL VSS J3 J1 VDDL VSS J3
AY26 VCC2IO J9 VDD VSSDL J7 J9 VDD VSSDL J7
BB26 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V M9 N1 M9 N1
VCC2IO A_DQM0 VDD VSS VDD VSS
A_DQM0 AT18 R1 VDD VSS P9 R1 VDD VSS P9
AV18 A_DQM1
A_DQM1 A_DQM2
A_DQM2 AV34
AU35 A_DQM3 1.8V NT5TU64M16DG-BD NT5TU64M16DG-BD
A_DQM3
AVDD12_MEMPLL AW39 A_AVDD12_MEMPLL A_DQS0# 3.3V
AY40 A_AVSS12_MEMPLL A_DQS0# BB16
A_TP_MEMPLL BB40 BA17 A_DQS1# FB40
A_TN_MEMPLL A_TP_MEMPLL A_DQS1# A_DQS2#
BC41 A_TN_MEMPLL A_DQS2# BC33 BLM18P
BA35 A_DQS3# C995
A_DQS3# 22uF/10v/X5R A_CLK0# R101 0 D_CLK0# D0V9

A_DQS0 R100 RN101

A_DQS0 AY16

9
5
6
7
8
C
BC17 A_DQS1 220uF/6.3v/LESR A_RA9 1 2 C138 0.1uF/16V
A_DQS1 A_DQS2 100 A_RA3
A_DQS2 BA33 3 4

NC

NC
NC
VCNTL
GND
BC35 A_DQS3 A_RA7 5 6
A_DQS3 CE22 C998 A_CLK0 R102 0 D_CLK0 A_RA12 C139 0.1uF/16V
7 8
+ R111 22uF/10vX5R 1 D0V9 RN102 100x4
A_BA0 10K_1% VIN A_CLK1# R103 0 D_CLK1# A_RA13 C140 0.1uF/16V
A_BA0 BB28 VOUT 4 7 8
AU27 A_BA1 A_CAS# 5 6
A_BA1 A_BA2 R104 A_RA11
A_BA2 AT28 3 4
DDR_VREF 3 D0V9 A_CS# 1 2 C141 0.1uF/16V
DDR_VREF VREF 100

GND
Close to U103 RN100 100x4
AW23 A_ODT A_BA0 7 8 C142 0.1uF/16V
A_ODT A_CAS# A_CLK1 R105 0 D_CLK1 A_RA10
A_CAS# AU23 5 6

2
AV24 A_CS# R110 C158 uP7719ASU8 CE21 A_WE# 3 4
A_CS# A_RAS# 10K_1% 0.1uF/16V + C999 C157 A_CKE C143 0.1uF/16V
A_RAS# BB24 U103 1 2
BC29 A_WE# 22uF/10v/X5R 0.1uF/16V RN103 100x4
A_WE# A_CKE A_RA1 C144 0.1uF/16V
A_CKE BA29 7 8
A_RA2 5 6
A_RA8 3 4
1.2V BC23 A_RA0 A_RA0 1 2 C145 0.1uF/16V
A_RA0 220uF/6.3v/LESR
FB100 FB AT26 A_RA1 RN104 100x4
A_RA1 A_RA2 A_ODT C146 0.1uF/16V
A_RA2 AV26 7 8
AVDD12_MEMPLL BC27 A_RA3 A_RAS# 5 6
A_RA3 A_RA4 A_RA4
A_RA4 AY24 3 4
C154 C155 AV28 A_RA5 A_RA6 1 2 C147 0.1uF/16V
NC 0.1uF/16V A_RA5
A_RA6
A_RA7
BC25
BA27
A_RA6
A_RA7
DDR_VREF
A_BA1
RN105
7
100x4
8
D
BA23 A_RA8 A_BA2 5 6
A_RA8 A_RA9 A_RA5 C148 0.1uF/16V
A_RA9 AW27 3 4
AY28 A_RA10 C149 C150 1 2
A_RA10 A_RA11 0.1uF/16V 0.1uF/16V 100x4
A_RA11 AT24
BA25 A_RA12
A_RA12 A_RA13
A_RA13 AV22

BC21 A_CLK0
A_RCLK0 A_CLK0#
A_RCLK0# BA21

A_TP_MEMPLL BA39 A_CLK1

TP100 A_RCLK1
BC39 A_CLK1#
A_TN_MEMPLL A_RCLK1# TP101
TP102
D0V9

NC AV30 Close to U103

BC43 REXTUP
R107 A_REXTDN DDR_VREF
A_RVREF AT30
R106

E
NC C151 C152 100 C993 C156
0.1uF/16V 0.1uF/16V 22uF/10v/X5R 0.1uF/16V

MT8530_DDR2
MT8530/BGA702/P0.695/B0.5

F
SCHEMATIC DIAGRAMS (6/17)

50
 1 2 3 4 5 6 7 8
U100B

U201 U202

B_DQ0 G8 M8 B_RA0 B_DQ18 G8 M8 B_RA0

B_DQ0 B_DQ4 DQ0 A0 B_RA1 B_DQ20 DQ0 A0 B_RA1
J9 DVSS B_DQ0 AR39 G2 DQ1 A1 M3 G2 DQ1 A1 M3
B_DQ1 B_DQ2 B_RA2 B_DQ23 B_RA2
A
J11 DVSS B_DQ1 AW43 H7 DQ2 A2 M7 H7 DQ2 A2 M7
T12 AU43 B_DQ2 B_DQ1 H3 N2 B_RA3 B_DQ19 H3 N2 B_RA3
DVSS B_DQ2 B_DQ3 1.8V B_DQ6 DQ3 A3 B_RA4 B_DQ17 DQ3 A3 B_RA4
V12 DVSS B_DQ3 AU41 H1 DQ4 A4 N8 H1 DQ4 A4 N8
P12 AW41 B_DQ4 B_DQ7 H9 N3 B_RA5 B_DQ16 H9 N3 B_RA5
DVSS B_DQ4 B_DQ5 B_DQ3 DQ5 A5 B_RA6 B_DQ22 DQ5 A5 B_RA6
J13 DVSS B_DQ5 AT38 F1 DQ6 A6 N7 F1 DQ6 A6 N7
U13 AR37 B_DQ6 B_DQ5 F9 P2 B_RA7 B_DQ21 F9 P2 B_RA7
DVSS B_DQ6 B_DQ7 B_DQ8 DQ7 A7 B_RA8 B_DQ24 DQ7 A7 B_RA8
W13 DVSS B_DQ7 AP36 C8 DQ8 A8 P8 C8 DQ8 A8 P8
AW13 AN43 B_DQ8 C201 C202 C203 C204 C205 C206 B_DQ9 C2 P3 B_RA9 B_DQ25 C2 P3 B_RA9
DVSS B_DQ8 B_DQ9 B_DQ10 DQ9 A9 B_RA10 B_DQ26 DQ9 A9 B_RA10
T14 DVSS B_DQ9 AK36 D7 DQ10 A10/AP M2 D7 DQ10 A10/AP M2
P14 B_DQ10 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V B_DQ11 D3 P7 B_RA11 B_DQ27 D3 P7 B_RA11
DVSS B_DQ10 AM40 DQ11 A11 DQ11 A11
AT14 AL37 B_DQ11 B_DQ15 D1 R2 B_RA12 B_DQ28 D1 R2 B_RA12
DVSS B_DQ11 B_DQ12 B_DQ13 DQ12 A12 B_RA13 B_DQ29 DQ12 A12 B_RA13
H16 DVSS B_DQ12 AM38 D9 DQ13 NC/A13 R8 D9 DQ13 NC/A13 R8
AR17 AM42 B_DQ13 B_DQ14 B1 R3 B_DQ30 B1 R3
DVSS B_DQ13 B_DQ14 1.8V B_DQ12 DQ14 NC/A14 B_DQ31 DQ14 NC/A14
AU17 DVSS B_DQ14 AL39 B9 DQ15 NC/N15 R7 B9 DQ15 NC/N15 R7
AW17 AN41 B_DQ15 A2 L2 B_BA0 A2 L2 B_BA0
DVSS B_DQ15 B_DQ16 NC BA0 B_BA1 NC BA0 B_BA1
J19 DVSS B_DQ16 Y38 E2 NC BA1 L3 E2 NC BA1 L3
AA21 AA41 B_DQ17 B_DQS1 B7 L1 B_BA2 B_DQS3 B7 L1 B_BA2
DVSS B_DQ17 B_DQ18 C207 C208 C209 C210 C211 C212 B_DQS1# UDQS NC/BA2 D_CLK2 B_DQS3# UDQS NC/BA2 D_CLK3
AC21 DVSS W37 A8 UDQS CK J8 A8 UDQS CK J8
B_DQ18 B_DQ19 B_DQS0 D_CLK2# B_DQS2 D_CLK3#
AE21 DVSS B_DQ19 AA43 F7 LDQS CK K8 F7 LDQS CK K8
AG21 B_DQ20 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V B_DQS0# E8 B_CS# B_DQS2# E8 B_CS#
DVSS B_DQ20 Y40 LDQS CS L8 LDQS CS L8
AJ21 W39 B_DQ21 B_DQM1 B3 L7 B_CAS# B_DQM3 B3 L7 B_CAS#
DVSS B_DQ21 B_DQ22 B_DQM0 UDM CAS B_ODT B_DQM2 UDM CAS B_ODT
AU21 DVSS B_DQ22 Y42 F3 LDM ODT K9 F3 LDM ODT K9
AW21 Y36 B_DQ23 DDR_VREF J2 K7 B_RAS# DDR_VREF J2 K7 B_RAS#
B
DVSS B_DQ23 B_DQ24 DDR_VREF B_CKE VREF RAS B_WE# B_CKE VREF RAS B_WE#
Y22 DVSS B_DQ24 T40 K2 CKE WE K3 K2 CKE WE K3
AK22 R37 B_DQ25 A1 A3 A1 A3
DVSS B_DQ25 B_DQ26 VDD VSS VDD VSS
AT22 DVSS R43 A9 VDDQ VSSQ A7 A9 VDDQ VSSQ A7
B_DQ26 B_DQ27 1.8V
J23 DVSS T38 1.8V C1 VDDQ VSSQ B2 1.8V C1 VDDQ VSSQ B2
B_DQ27 B_DQ28
AC23 DVSS T36 C3 VDDQ VSSQ B8 C3 VDDQ VSSQ B8
B_DQ28 B_DQ29
AE23 DVSS R41 C7 VDDQ VSSQ D2 C7 VDDQ VSSQ D2
B_DQ29 B_DQ30
AG23 DVSS R39 C9 VDDQ VSSQ D8 C9 VDDQ VSSQ D8
B_DQ30 B_DQ31 C213 C214 C215 C216 C217 C218 C219 C220
Y24 DVSS B_DQ31 T42 E1 VDD VSS E3 E1 VDD VSS E3
AB24 0.1uF/16V E9 E7 E9 E7
DVSS 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V 0.1uF/16V VDDQ VSSQ VDDQ VSSQ
AD24 DVSS G1 VDDQ VSSQ F2 G1 VDDQ VSSQ F2
AF24 AP38 B_DQM0 G3 F8 G3 F8
DVSS B_DQM0 B_DQM1 VDDQ VSSQ VDDQ VSSQ
AH24 DVSS B_DQM1 AM36 G7 VDDQ VSSQ H2 G7 VDDQ VSSQ H2
AK24 V38 B_DQM2 G9 H8 G9 H8
DVSS B_DQM2 B_DQM3 VDDQ VSSQ VDDQ VSSQ
AC25 DVSS B_DQM3 V36 J1 VDDL VSS J3 J1 VDDL VSS J3
AE25 DVSS J9 VDD VSSDL J7 J9 VDD VSSDL J7
AG25 DVSS M9 VDD VSS N1 M9 VDD VSS N1
AR25 AT42 B_DQS0# R1 P9 R1 P9
DVSS B_DQS0# B_DQS1# VDD VSS VDD VSS
AU25 DVSS B_DQS1# AR41
AW25 W43 B_DQS2#
DVSS B_DQS2# B_DQS3# NT5TU64M16DG-BD NT5TU64M16DG-BD
Y26 DVSS B_DQS3# U41
AB26 FBGA84/SMD FBGA84/SMD
DVSS
AD26 DVSS
C
AF26 AT40 B_DQS0
DVSS B_DQS0 B_DQS1
AH26 DVSS B_DQS1 AR43
AK26 W41 B_DQS2
DVSS B_DQS2 B_DQS3
AC27 DVSS B_DQS3 U43
AE27
AG27
DVSS
DVSS NT5TU64M16DG-BD(1Gb/1066M)
Y28 DVSS
AB28 AD40 B_BA0 B_CLK0# R200 0 D_CLK2#
DVSS B_BA0 B_BA1
AD28 DVSS B_BA1 AD36
AF28 AC39 B_BA2 R201
DVSS B_BA2
AH28 DVSS 100
AK28 DVSS
AC29 D0V9
DVSS B_CAS# B_CLK0 R202 0 D_CLK2
AE29 DVSS B_CAS# AH40
AG29 AD42 B_CS# TP200 RN200
DVSS B_CS# B_RAS# B_RA10 C221 0.1uF/16V
AR29 DVSS AJ41 7 8
B_RAS# B_WE# 1.8V B_RA9
AU29 DVSS AC43 5 6
B_WE# B_CKE B_CLK1# R203 0 D_CLK3# B_BA2
AW29 DVSS AC41 3 4
B_CKE B_WE# C222 0.1uF/16V
Y30 DVSS AB38 1 2
NC1 R204 RN201 100x4
AK30 DVSS
AA31 C224 C225 C226 C227 B_RA0 7 8 C223 0.1uF/16V
DVSS B_RA0 100 0.1uF/16V B_ODT
AC31 DVSS AG43 5 6
B_RA0 B_RA1 0.1uF/16V 0.1uF/16V 0.1uF/16V B_RA2
D
AE31 DVSS AF38 3 4
B_RA1 B_RA2 B_CLK1 R205 0 D_CLK3 B_RA1 C228 0.1uF/16V
AG31 DVSS AG37 1 2
B_RA2 B_RA3 RN202 100x4
AJ31 DVSS B_RA3 AJ43
AU33 AH42 B_RA4 B_RA12 7 8 C229 0.1uF/16V
DVSS B_RA4 B_RA5 B_RA7
AW33 DVSS AC37 5 6
B_RA5 B_RA6 B_BA0
AT34 DVSS AG39 3 4
B_RA6 B_RA7 B_CS# C230 0.1uF/16V
U35 DVSS AE43 1 2
B_RA7 B_RA8 RN203 100x4
AA35 DVSS B_RA8 AH36
AE35 AD38 B_RA9 B_BA1 7 8 C231 0.1uF/16V
DVSS B_RA9 B_RA10 B_RA5
AJ35 DVSS AF36 5 6
B_RA10 B_RA11 B_CKE C232 0.1uF/16V
AN35 DVSS AH38 3 4
B_RA11 B_RA12
H36 DVSS AE41 1 2
B_RA12 B_RA13 DDR_VREF RN204 100x4 C233 0.1uF/16V
AT36 DVSS B_RA13 AK38
G37 B_RA11 7 8
DVSS B_RA4
N37 DVSS 5 6
U37 1.8V DDR_VREF B_RA8 3 4 C236 0.1uF/16V
DVSS DDR_VREF B_RA6
AA37 DVSS 1 2
AE37 AL43 B_CLK0 RN205 100x4
DVSS B_RCLK0 B_CLK0# B_RAS#
AJ37 DVSS AL41 7 8
B_RCLK0# C234 C235 C200 DDR_VREF B_RA3 C237 0.1uF/16V
AN37 DVSS 5 6
AW37 0.1uF/16V B_CAS# 3 4
DVSS B_CLK1 0.1uF/16V 0.1uF/16V B_RA13
N39 DVSS N41 1 2
B_RCLK1 B_CLK1# C238 100x4
U39 N43
E
DVSS B_RCLK1# 0.1uF/16V
AA39 DVSS
AE39 DVSS
AJ39 R206
DVSS B_ODT 100
AN39 DVSS B_ODT AG41
AU39 M42 REXTUN
DVSS B_REXTDN DDR_VREF
BA41 DVSS B_RVREF AB36
AY42 DVSS
V14 C239
DVSS 0.1uF/16V
U15 DVSS
W15 DVSS
Y14 DVSS
K34 DVSS
R35 DVSS
AJ7 DVSS_XTAL

MT8530_DDR2
SCHEMATIC DIAGRAMS (7/17)
MT8530/BGA702/P0.695/B0.5

51
 1 2 3 4 5 6 7 8
FB200
1.2V BLM15P U100C
1.2V
AVDD12_APLL FB206 HW TRAPPING
AVDD12_HDMI
C951 BLM15P NFREN
NFREN [5,6]
NC C927 C953 BE 1.2V:Below 0.1A NFWEN
0.1uF C952 NFWEN [5,6]
0.1uF
10uF/10V NFALE
NFALE [5,6]
3.3V_VDAC FB201 AVDD33_VDACR E31 D22 AOMCLK FB207 3.3V VCC NFCLE

A
AVDD33_VDACR AOMCLK NFCLE [5,6]
BLM15P H32 B22 AOBCK BLM18P
AVSS33_VDACR AOBCK AOLRCK NFCEN
AOLRCK E23 NFCEN [5,6]
AVDD33_VDACY AVDD33_VDACY G31 C23 AOSDATA0 AVDD33_HDMI 2 3 NFCEN2
AVDD33_VDACY AOSDATA0 NFCEN2 [5,6]
H30 G23 Q200 R944
C930 AVSS33_VDACY AOSDATA1 C928 C929 C954 QM2404K 1K FESFDI
AOSDATA2 H22 FESFDI [5,6]
NC C955 F22 0.1uF 0.1uF 4.7uF
AOSDATA3

1
0.1uF AVDD33_VDACBG D32 E21 AOSDATA4 AUDIO I2S
3.3V_VDAC FB202 AVDD33_VDACBG AOSDATA4
F32 AVSS33_VDACBG AOSDATA5 D20
BLM15P
R945 AOSDATA4
AOSDATA4 [10]
AVDD33_VDACR AVDD33_XTAL E25 A19 ASPDIF R946 10K
AVDD33_XTAL SPDIF 0 PHY_RESET#
G25 AVSS33_XTAL MCIN F20
C931 H20 AMUTE
NC C932 AMUTE HDMI AOSDATA0
0.1uF AOSDATA0 [10]
AVDD33_XTAL25M BC7 AVDD33_XTAL25M POWER
AY8 A33 Y1 AOLRCK
AVSS33_XTAL25M DACOUT1 AOLRCK [10]
3.3V_VDAC C33 Y2 AOBCK
DACOUT2 AOBCK [10]
FB203 B32 Y3 AOMCLK
DACOUT3 AOMCLK [10]
BLM15P AVDD33_SACD AU5 A31
AVDD33_SACD DACOUT4
AV4 AVSS33_SACD DACOUT5 C31
AVDD33_VDACBG D30 Y6 R208 5V_STBY_DDC
DACOUT6 3.3V_STBY 10K
C933 AVDD12_ADC AR7 AV
B
1.2V NC C934 AVDD12_ADC CHIP_FS R950 560_1%
AT6 AVSS12_ADC DACFS E33
FB204 0.1uF R209 D202 ASPDIF
R210 ASPDIF [11]
BLM15P 1.8K ESD0603/SMD/NC

1
AVDD12_DMPLL B24 10K Y1
AVDD12_DMPLL Y1 [11]
AVDD12_DMPLL F24 G29 AVDD12_HDMI Q203 Y2
AVSS12_DMPLL AVDD12_HDMI Y2 [11]
F30 HDMISCK 3 2 HDMI_SCL Y3
AVDD12_HDMI Y3 [11]
C935 H26 AVDD33_HDMI
NC C956 AVDD12_APLL AVDD33_HDMI 2SK3018(ROHM) 5V_STBY_DDC Y6
D24 AVDD12_APLL AVDD33_HDMI J27 Y6 [11]
1.2V 0.1uF H24 H28
FB205 AVSS12_APLL AVSS12_HDMI
AVSS12_HDMI J29
BLM15P
AVSS33_HDMI G27 SACD
AVDD12_27MPLL A23 F28 R213 D204
AVDD12_27MPLL AVDD12_27MPLL AVSS33_HDMI Q204 1.8k ESD0603/SMD/NC NS_CLKIN_33
J25 AVSS12_27MPLL NS_CLKIN_33 [8]
2SK3018(ROHM)
Standby Power C936 A29 TXC- NS_RFIP
CLK_M NS_RFIP [8]
NC C957 C29 TXC+ HDMISD 3 2 HDMI_SDA NS_RFIN
0.1uF CLK_P NS_RFIN [8]
VCC3IO_STB
C937
FB208 B28 TX0- 3.3V_STBY R215
CH0_M
BLM15P XTALI_25M
CH0_P D28 TX0+ 10K
HDMI CNT

1
BB8 R216
AVDD33_XTAL R947 R948 10 XTAL25MI TX1- 10K AMUTE
BA9 A27
22pF 1M XTAL25MO CH1_M
C27 TX1+ C940 DDC AMUTE [6,10]
C938 CH1_P NC PHY_RESET#
C939 PHY_RESET# [12]
C
NC C958 XTALI A25 B26 TX2-
0.1uF XTALO_25M XTALO NS_XTALI CH2_M TX2+
C25 NS_XTALO CH2_P D26
3.3V Y200
FB209 25.0000MHz G39
BLM15P 22pF HTPLG CEC
CEC E43
TXP E27 R207
TP202 TP_PLLG
AVDD33_SACD TXN F26 NC
TP203 TN_PLLG R211
E41 HDMISD HPD
HDMISD
C941 R237 NC
HDMISCK F40 HDMISCK
0 Differential Signal !
NC C942
0.1uF
No Through Hole !
B30 EXT_CAP TP204 100 ohm - Impedance

23
22
EXT_CAP EXT_RES R949 2.49K_1% J200
EXT_RES E29
1.2V TX2+ 1 10 F_TX2+ 1

TVS Arrays
NS_TSTP 1 10
RTC_VDD3.3 AU1 AVDD33_RTC NS_TSTP BA1 TP210 2
FB210 RTC_GND AU3 AY2 NS_TSTN TP718 TX2- 2 9 F_TX2- 3
BLM15P C959 AVSS33_RTC NS_TSTN 2 8 F_TX1+ 4
0.1uF NS_CLKIN_33 3 8 5
AVDD12_ADC NS_CLKIN_33 GND GND F_TX1-
NS_CKIN33 F6 6
K8 NS_RFIP_C C943 1uF NS_RFIP TX1+ 4 7 F_TX0+ 7
C945 R227 150K/NC REXT_RTC NS_RFIP NS_RFIN_C C944 1uF NS_RFIN 4 7
AR5 RTCRBIAS NS_RFIN H4 8
NC C946 RTCXI AT2 TX1- 5 6 F_TX0- 9
3.3V 0.1uF RTCXO XI_RTC 5 6 F_TXC+
AT4 XO_RTC 10
FB211 A21 SPBCK V205 11
SPBCK
D
BLM15P G21 SPSDATA V206 D200 F_TXC- 12
SPDATA SPLRCK RClamp0524P TP201 HDMI-CEC
SPLRCK B20 V207 13
AVDD33_XTAL25M C21 SPMCLK V208 14
CEC SPMCLK
CEC [13] HDMI_SCL 15
C960 D211 HDMI_SDA 16
HDMI-CEC
NC C961 HDMI-CEC [13] TX0+ 1 10 ESD0603/SMD/NC 17

TVS Arrays
0.1uF 1 10
18
MT8530_DDR2 EDID TX0- 2 2 8 9 HPD_IN 19
MT8530/BGA702/P0.695/B0.5
POWER 3 GND GND 8 HDMI-TYPE-A

20
21
TXC+ 4 7
4 7
C962 NJM2882-F05
5V_STBY TXC- 5 6 5V_STBY_DDC
XTALI 5V_STBY_DDC 0 R242 5 6
1 5 MCU_3.3V
VIN VOUT

3
R217 NC R243 D201 C950
22pF 3.3V_STBY C963
1M C966 RClamp0524P 0.1uF
R248 5V_RS232 10uF/10v
C948 0.01uF 2 GND NC
Y201 1
R219 10 XTALO 3

2
EN 10K R241
27.0000MHz 4 BYPASS Q210 1 HPD_IN
22pF R247 DTA114EUA
2N3904

2
E
SYSTEM C970 HPD Q14
5V_STBY

3
CLK 0.01uF U17
R239
SOURCE 22K
10K 22K
MCU_IO_5
MCU_IO_5 [13] CLOSE TO HDMI R240
R250
Standby Power SOCKET
3.3V_STBY NC C949
R244 0.01uF
2

10K
MCU_IO_5 1 Q212
RTC_VDD3.3 2N3904
FB212
C969
3

BLM15P R246
R220 1K 100pF/NC
NC

DIGITAL AUDIO SIGNAL LINE

VIDEO OUTPUT SIGNAL LINE
F
COMPONENT OUTPUT SIGNAL LINE
HDMI OUTPUT SIGNAL LINE SCHEMATIC DIAGRAMS (8/17)

52
 1 2 3 4 5 6 7 8
HW TRAPPING
U100E 3.3V NAND NFREN
NFREN [6]
NFWEN
TP304 1.2V FLASH NFALE
NFWEN [6]

4.7K

4.7K
NFALE [6]

10K
NC
SFCS J39 AW5 AVDD12_STX1 FB308 BLM15P 0402 NFCLE
SFCS AVDD12_STX1 NFCLE [6]
SFCK G41 AV6 AVDD12_SRX1 FB301 BLM15P U300
SFDI SFCK AVDD12_SRX1 BE 1.2V:Below 0.1A NFCEN
H40 SFDI AVSS12_ST1 AV8 48 NC NC 1 NFCEN [6]
SFDO F42 C301 C302 47 2 NFCEN2
SFDO NC NC NFCEN2 [6]
A
0.1uF 0.1uF 46 3

R304

R305

R306

R307
BE_RXP1_C NC NC FESFDI
SRXP_1 BC1 45 NC NC 4 FESFDI [6]
NFALE L37 BB2 BE_RXN1_C NFD7 44 5
NFALE SRXN_1 I/O7 NC
NFCEN M38 NFCEN
NFD6 43 I/O6 SE 6 NFRBN2 BEFE_EX
NFCLE K38 BA3 BE_TXN1_C NFD5 42 7 NFRBN
NFRBN NFCLE STXN_1 BE_TXP1_C NFD4 I/O5 R/B NFREN FE_RXIN
P38 NFRBN STXP_1 BC3 41 I/O4 RE 8 FE_RXIN [8]
NFREN M36 1.2V 3.3V 40 9 NFCEN FE_RXIP
NFREN NC CE FE_RXIP [8]
NFWEN G43 39 10 NFCEN2
NFCEN2 NFWEN AVDD12_SRX2 FB302 BLM15P NC NC 3.3V 0402 FE_TXOP
L39 NFCEN2 AVDD12_SRX2 AW7 0402 38 NC NC 11 FE_TXOP [8]
NFRBN2 P36 AY6 AVDD12_STX2 FB303 BLM15P C303 0.1uF 3.3V 37 12 3.3V C306 0.1uF FE_TXON
NFRBN2 AVDD12_STX2 VCC VCC FE_TXON [8]
NFD0 H42 AU9 BE 1.2V:Below 0.1A
36 13
NFD1 NFD0 AVSS12_ST2 C304 C305 VSS VSS NFCEN3 FE_SFCK
J41 NFD1 AVSS12_ST2 AW9 35 NC NC 14 TP305 FE_SFCK [8]
NFD2 J43 0.1uF 0.1uF FB304 34 15 NFCEN4_R FE_SFDO
NFD2 NC NC TP306 FE_SFDO [8]
NFD3 K40 BLM18P 3.3V 33 16 NFCLE FE_SFCS#
NFD3 NC CLE FE_SFCS# [8]
NFD4 K42 AY4 BE_RXP2_C NFD3 32 17 NFALE FE_SFDI
NFD4 SRXP_2 I/O3 ALE FE_SFDI [8]
NFD5 L41 BB4 BE_RXN2_C NFD2 31 18 NFWEN
NFD6 NFD5 SRXN_2 BE 3.3V:Below 0.5A NFD1 I/O2 WE NFWP#
L43 NFD6 30 I/O1 WP 19
NFD7 M40 NFD7
C307 C308 NFD0 29 I/O0 NC 20 CNT
BA5 BE_TXN2_C 0.1uF NC 28 21
STXN_2 BE_TXP2_C NC NC AMUTE
STXP_2 BC5 27 NC NC 22 AMUTE [4,6,10]
GPIO0 C17 FB305 26 23
GPIO1 GPIO0 BLM15P 1.2V NC NC
A17 GPIO1 25 NC NC 24
GPIO2 C19 AU7 AVDD33_ST
TP315 GPIO3 GPIO2 AVDD33_ST NAND08GW3B2C
B18 AV10 AVDD12_ST
B
TEST POINT SMD1.0 GPIO3 AVDD12_ST
GPIO4 AY10 BE 1.2V:Below 0.1A TSOP48/SMD
TP314 GPIO5 GPIO4 C309 C310 C311
TEST POINT SMD1.0 AW11 GPIO5 0402
TP316 GPIO6 AV12 BA7 SREF R331 12.1K_1% 0.1uF NC 0.1uF
TEST POINT SMD1.0 GPIO7 GPIO6 RREF FB306
BC9
TEST POINT
TP313
SMD1.0 GPIO7
SVCTST BB6 SVCTST R316 12.1K_1%/NC BLM18P 3.3V FE & BE CORE-RSTI#
CORE-RSTI# [1]
SCL AT12 AN3 VDD3.3_USB
SDA AV14
SCL
SDA
AVDD33_USB
AVSS33_USB AL5
AK8 VDD1.2_USB C312 C313
BE 3.3V:Below 0.5A
Data 25M_Buf
25M_Buf [8]
AVDD12_USB 0.1uF NC RSTI
TTDO
TTRST#
BB10 TDO
AVSS12_USB AK6
USBP0
FB307
BLM15P 1.2V
BE_RXP1_C
0402
C318 0.01uF FE_TXOP exchange RSTI [8]
AY12 TRST_ USB_DP0 AL1
TTDI BB12 AK2 USBM0 TP317 BE_RXN1_C C319 0.01uF FE_TXON
TTMS TDI USB_DM0 TP318
BC11 TMS TP308
TTCK BA11 BE 1.2V:Below 0.1A BE_TXN1_C C322 0.01uF FE_RXIN
TCK USBP1 TEST POINT SMD1.0 C314 C315
USB_DP1 AM2
to AL3 USBM1 TP312 0.1uF NC BE_TXP1_C C324 0.01uF FE_RXIP
25M_Buf R317 0 VCLK25MIAJ9 USB_DM1 TP310
FE VCLK25MI
AP4 CORE-RSTI#
USB_ID PAD_VRT R318 5.1K_1%
USB_VRT AM4
RSTI R319 0 MRESET_ C35 Externel circuit
MRESET_ reset Core BE_RXP2_C
C317 FE get data from BE TP301
C316 D4 FESFCK 7 8 FE_SFCK
100p/NC FESFCK
5p/NC A1 FESFDO 5 6 FE_SFDO BE_RXN2_C TP300
C
FESFDO FESFCS FE_SFCS#
FESFCS B2 3 4
C3 FESFDI 1 2 FE_SFDI BE_TXN2_C TP303
FESFDI RN300 22x4
FESFDI BE_TXP2_C TP302

MT8530_DDR2
MT8530/BGA702/P0.695/B0.5
GPIO0
GPIO TP309 3.3V
3.3V NOR
0402 TEST POINT SMD1.0 0402
GPIO1 R321 0 USB_EN0# 0402 3.3V
C300 FLASH
GPIO2 R322 0 USB_OC0# R300 R301 R302
10K U301 10K 10K
3.3V SFCS 1 8 0.1uF
I2C GPIO4 TP307
SFDI
DF_WP#
2
3
S_
Q
VCC
HOLD_ 7
6
HOLD#
SFCK
TEST POINT SMD1.0 W_/VPP C SFDO
4 VSS D 5
R329 R330
4.7K 4.7K M25P16/NC R303
10K/NC

SCL SCL
SDA SDA SCL
D
SCL [13]
SDA
SDA [13]

USBM1 1 6
1 6
IIC MCU TO MT8530
USBP1 2 2 5 5 USB
3 3 4 4

7
3A RClamp0854P D25

7
JT10
uP7534CMA5-10 1 1
3.3V USBP1 2 2
R369
USBM1 3 3
FB/3A/1206
3.3V USB_OC0# 1 5 USB_VCC 4 4
OC# VOUT
FB15 5 5
0402 ICE 100K
2
USB_EN#
H: enable;
Clost to Connector
+ CE305 5x1/W/HOUSING
GND
10K

10K

10K

10K
10K/NC

VCC_P L: disable; CB337 100uF/16v

3 VCC_P 0.1uF
EN
4 IN
C320 C11

E
J304 0.1uF 22uF/10v
R308

R315

R314

R311

R309

U15
TTRST# 8
TTDI 7
TTMS R1182
TOP

6
TTCK 5 10K
TP311 TEST POINT SMD1.0 TRTCK 4
TTDO 3
2 USB_EN0# R1243 0R
1
10K

10K/NC

R1181
22K
HEADER 8 SMD1.0 TOP
H8S/P1.0
R312

R310

F
SCHEMATIC DIAGRAMS (9/17)

53
 1 2 3 4 5 6 7 8
U100D
VCC3IO_STB
FB400
3.3V
HW Trapping MII
VCC3IO_STB1
BLM15P
ETCOL
VCC3IO_STB1
J33 C37 ETCOL Pin ETCRS
ETCOL [12]
VCC3IO_STB ETCOL ETCRS [12]
C403 C404 Close to G35 H34 ETCRS 0402
0.1uF IC 3.3V_STBY VCC3IO_STB:Below 20mA VCC3IO_STB ETCRS
F36 ETMDC (Test Mode) ETMDC
ETMDC [12]
A
4.7uF/NC FB401 ETMDC ETMDIO ETMDIO
ETMDIO B38 ETMDIO [12]

10K/NC

10K/NC

10K/NC

10K/NC

10K/NC
BLM15P A43 ETRXCLK NFWEN: [L(Default) H(OLT EN)]
AVDD33_LDO J37 ETRXCLK ETRXD0 ETTXCLK
AVDD33_LDO ETRXD0 A41 NFCLE: [L(Default) H(RTC strapping)] ETTXCLK [12]
K36 B40 ETRXD1 ETTXD0
AVDD33_LDO:Below 20mA AVSS33_LDO ETRXD1 NFREN: [L(Default) H(ABIST EN)] ETTXD0 [12]
C39 ETRXD2 ETTXD1
ETRXD2 ETTXD1 [12]
A39 ETRXD3 FESFDI/NFCEN2: [00(Default) 01(CPU Test) ETTXD2

R413

R412

R411

R410

R407
ETRXD3 ETTXD2 [12]
AVDD33_LDO F38 ETRXDV 10(VDAC Test) 11(SCAN Test)] ETTXD3
ETRXDV ETTXD3 [12]
B42 ETRXER ETTXEN
ETRXER ETTXEN [12]
C41 ETTXCLK NFWEN
C405 C406 Close to
ETTXCLK ETTXD0 ETRXCLK
ETTXD0 C43 ETRXCLK [12]
0.1uF IC D40 ETTXD1 NFCLE ETRXD0
4.7uF/NC ETTXD1 ETRXD0 [12]
D42 ETTXD2 ETRXD1
ETTXD2 ETRXD1 [12]
E39 ETTXD3 NFREN ETRXD2
ETTXD3 ETRXD2 [12]
AVDD10_LDO H38 D38 ETTXEN ETRXD3
AVDD10_LDO ETTXEN ETRXD3 [12]
E37 EXT_INTR_3 FESFDI ETRXDV
ETTXER ETRXDV [12]
C402 ETRXER
ETRXER [12]
0.1uF/NC NFCEN2
A37 UARXD
UARXD
UATXD D36 UATXD HW TRAPPING B

10K

10K

10K

10K

10K
3.3V_STBY D34 VSTB NFWEN
VSTB NFWEN [5]
VDATA B34 VDATA
3.3V_STBY
HW NFCLE
NFCLE [5]
A35 VCLK NFREN
VCLK NFREN [5]
R415 Trapping FESFDI

R405

R403

R402

R414

R404
FESFDI [5]
10K NFCEN2
NFCEN2 [5]
LCDRD G33 P_RESET# Pin NFALE
NFALE [5]
R420 R421 B36 IR AMUTE
IR TP401 AMUTE [4,10]
NC NC
RESET_ E35 RESET# (Boot & ICE) NFCEN
NFCEN [5]
F34 OPWRSB 3.3V
ETRXER OPWRSB
NFALE: [ L( Default) H( Flash boot)]
EXT_INTR_3 NFALE R409 10K/NC
AMUTE: [ L( Default) H( Main ICE)] CNT
For STBY R1019 10K NFCEN: [ L( Default) H(2nd ICE/USB UPG)] OPWRSB
OPWRSB [1]
MT8530_DDR2
MCU 232
MT8530/BGA702/P0.695/B0.5 AMUTE R408 10K/NC RESET#
RESET# [1,12]

C
R1020 10K
VFD/IR NFCEN R406 10K/NC
VSTB
VSTB [1] R1021 10K
VDATA
VDATA [1]
VCLK
VCLK [1]

EXT_INTR_3
ETTXER [12]
ETTXD1

3.3V_STBY ETTXD0
RS232
0402 R416 R417
R418 10K 10K
10K R419
10K 0402
J406
D
R422 33
1
2 UARXD C407
3 UATXD 0.1uF
4
33
R428
4x1/W/HOUSING

F
SCHEMATIC DIAGRAMS (10/17)

54
 1 2 3 4 5 6 7 8
U100F

1.1V

1.1V

VOUTVSYNC
Y20
AB20
VCCK VOUTVSYNC G11
F10 VOUTHSYNC V500 3.3V A
C537 C538 C523 C526 VCCK VOUTHSYNC V501
AD20 VCCK
10uF 0.1uF 4.7uF 4.7uF AF20 E9 VOUTCLK1 EFVDDQ_CTL TP732
VCCK VOUTCLK1 VOUTCLK2 V502 EFPWRQ TP733
AH20 VCCK VOUTCLK2 F8 V503
AK20 FB4
VCCK 3.3V_DVIO
W21 VCCK BLM21P
AL21 D8 VOUT0
VCCK VOUTD0 VOUT1 V504
AB22 VCCK VOUTD1 A3 V505
AD22 E7 VOUT2
C518 C531 C530 VCCK VOUTD2 VOUT3 V506
AF22 VCCK VOUTD3 B4 V507
0.01uF 0.01uF 0.01uF AH22 C5 VOUT4 C536 C535
VCCK VOUTD4 VOUT5 V508 4.7uF 4.7uF
W23 VCCK VOUTD5 A5 V509
AA23 D6 VOUT6
VCCK VOUTD6 VOUT7 V510
AJ23 VCCK VOUTD7 B6 V511
AL23
W25
VCCK VOUTD8 C7
A7
VOUT8
VOUT9 V512 B
VCCK VOUTD9 VOUT10 V520
AA25 VCCK VOUTD10 B8 V521
C517 C528 C534 W27 C9 VOUT11 Close
0.01uF 0.01uF 0.01uF VCCK_PWM VOUTD11 VOUT12 V522
to IC C514 C515
AL25 A9 C516 C510
VCCK VOUTD12 VOUT13 V523 0.1uF 0.1uF 0.1uF 0.1uF
AJ25 VCCK VOUTD13 D10 V524
AA27 B10 VOUT14
VCCK VOUTD14 VOUT15 V525
AJ27 VCCK VOUTD15 C11 V526
AL27 E11 VOUT16
VCCK VOUTD16 VOUT17 V527
W29 VCCK VOUTD17 F12 V529
AA29 G13 VOUT18
C505 C506 C507 VCCK VOUTD18 VOUT19 V514
AJ29 VCCK VOUTD19 E13 V516
0.1uF 0.1uF 0.1uF AL29 C520 C521 C508 C509
VCCK VSYNC_IN 0.1uF 0.1uF 0.1uF 0.1uF
AB30 VCCK VINVSYNC E17 V528
AD30 B16 HSYNC_IN
VCCK VINHSYNC V513
AF30 VCCK CCIR_IN_CLK
C
AH30 VCCK VINCLK D16 V515
W31 VCCK
AL31 VCCK
C511 C512 C513 Y32 A11 CCIR_IN_C0
VCCK VIND0 V517
0.1uF 0.1uF 0.1uF AB32 D12 CCIR_IN_C1
VCCK VIND1 V518
AD32 E15 CCIR_IN_C2
VCCK VIND2 V519
AF32 F16 CCIR_IN_C3
VCCK VIND3 V537
AH32 B12 CCIR_IN_C4 0402
VCCK VIND4 V538
AK32 F14 CCIR_IN_C5 VOUT19 R501 0 EFVDDQ_CTL
VCCK VIND5 V539
3.3V_DVIO H14 CCIR_IN_C6
VIND6 V530
F18 CCIR_IN_C7
VIND7 V531
C529 C525 C519 H10 G15 CCIR_IN_C8
VCC3IO_3 VIND8 V532
0.1uF 0.1uF 0.1uF VCC3IO:Below 0.4A H12 J17 CCIR_IN_C9 EFPWRQ
VCC3IO_3 VIND9 V533
AU13 G17 CCIR_IN_Y0
VCC3IO_1 VIND10 V534
Close
to IC
J15 VCC3IO_3 VIND11 C13 CCIR_IN_Y1
V535 To ICE D
H18 A13 CCIR_IN_Y2 Board
C501 VCC3IO_3 VIND12 V536
J21 D14 CCIR_IN_Y3
1000pF VCC3IO_PWM VIND13 V547
L35 B14 CCIR_IN_Y4
VCC3IO_2 VIND14 V548
N35 C15 CCIR_IN_Y5
VCC3IO_2 VIND15 V549
C532 C533 C524 A15 CCIR_IN_Y6
VIND16 V540 CCIR_IN_Y9
0.1uF 0.1uF 0.1uF Close D18 CCIR_IN_Y7 CCIR_IN_Y9 [13]
VIND17 V541
to IC G19 CCIR_IN_Y8
VIND18 V542
0402 EFPWRQ AU11 E19 CCIR_IN_Y9
EFPWRQ VIND19 V543
R500 C500
0 0.1uF

MT8530_DDR2
MT8530/BGA702/P0.695/B0.5
E

F
SCHEMATIC DIAGRAMS (11/17)

55
 1 2 3 4 5 6 7 8
M3.3V GIO14 /TRST VCC FB604 AVCC AVCC BEFE_EX
A1.2V GIO19 TDO BLM18P
M3.3V GIO16 TMS FE_RXIN
TCK FE_RXIN [5]
D3.3V GIO17 R648 0 FE_RXIP
FE_RXIP [5]

VDAC0#
A3.3V C996 GIO18 R649 0 RTCK
0.1uF C713 C714 GIO15 R652 0 TDI TGIO15 C691 C690 + CE691 FE_TXOP
FE_TXOP [5]
D3.3V 4.7uF 0.1uF 0.1uF 10uF/10v 220uF/10v FE_TXON
FE_TXON [5]
C644 C645 A3.3V
4.7uF 0.1uF C717 FE_GND FE_SFCK

0
FE_SFCK [5]
10uF R650 R651 FE_SFDO
A
FE FE_SFDO [5]
C997 NC NC FE_GND FE_SFCS#
ICE FE_SFCS# [5]
FE_SFDI

R1023
C602 0.1uF FE_SFDI [5]
0.1uF
R602 23.2K_1% TP748TP749
SACD

FE_SFHOLD
FE_SFWP#

FE_SFCS#
FE ICE

FE_SFDI

FE_SFDO
FE_SFCK
GIO14
GIO15
GIO18
GIO17
GIO16
GIO19
NS_CLKIN_33
NS_CLKIN_33 [4]

EQBIAS

VRDC1O
FE_GND D1.2V GIO14 TP734

VDAC0

VRDCO
AUX1

RSTI
MPX1
MPX2
MPX3
TP614 FOIP GIO19 TP735 NS_RFIP
NS_RFIP [4]
TP613 FOIN R615 100K XTAL25MO D3.3V GIO16 TP736 NS_RFIN
NS_RFIN [4]
GIO17 TP737
TP634 VRDCO 25M_Buf R616 0 FE_XTALI GIO8 R610 10K GIO18 TP738
V633 VRDC1O GIO15 TP741 CNT

AB12
M10
AJ3
AJ1

AA9

T10

U11

AV2

AW1
AW3

W11
GIO2 R611 10K

M4

M2

G1
M6

M8

G7

H6

C1
K4

L3
L1

P6

L5
K2
J3
R9

H2

L7
F2
K6
E1

F4

T8
U100G
I/O Board 25M_Buf
25M_Buf [5]

FE_JTDI
FE_RSTI

FE_SFDI
FE_JTCLK
FE_XTAL25MI

FE_JTRST#
RSTI

FE_AUX1

FE_DVDD12I

FE_DVDD12I

FE_JTDO

FE_JTMS

FE_DVDD12I
FE_DVDD12I
FE_EQBIAS

FE_SFCS#

FE_SFCLK
FE_JRTCLK

FE_SFDO
FE_VDAC0

FE_AVDD12_2
FE_VRDC0

FE_SFWP#

FE_SFHOLD#
FE_XTAL25MO

FE_DVDD33O
RSTI [5]

FE_MVDDQ

FE_MVDDQ
FE_MPXOUT1
FE_MPXOUT2
FE_MPXOUT3
FE_AVDD33_LVDS

FE_VWDC3O
FE_VWDC2O
FE_VWDC1O
PLAY# TP742
EJECT# TP743
LGO4N TP744 MOTOR DRIVER
V14REF U7 LED1 TP745
VFVREF FE_V14 FG MPX1 R608 0 NS_RFIP UTXD TP746 GAINSW2
N5 FE_VFVREF FE_FG G3 GAINSW2
VHAVC J1 E3 GIO2 MPX2 R609 0 NS_RFIN URXD TP747 MUTE2
FE_HAVC FE_GIO2 MUTE2 [9]
W5 D2 UTXD GIO9 R607 0 NS_CLKIN_33 GIO2 TP740 MUTE1

B
FE_AGND FE_GIO11 MUTE1 [9]
TRINA P4 H8 URXD GIO8 TP606
C639 TRINB FE_TRINA FE_GIO10 GIO9 TRAYPWM
R5 FE_TRINB FE_GIO9 E5 SACD KEY TRAYPWM [9]
VFVREF 2.2uF TRINC N3 L9 GIO8 C615 DMSO
FE_TRINC FE_GIO8 DMSO [9]
TRIND R7 G5 GIO7 NC FOSO
FE_TRIND FE_GIO7 FOSO [9]
INA P2 G9 GIO6 TRSO
FE_INA FE_GIO6 TRSO [9]
FE_GND INB N1 J5 GIO5 A1.2V TLSO
FE_INB FE_GIO5 TLSO [9]
C641 INC R3 J7 GIO4 FE_GND
2.2uF A3.3V IND FE_INC FE_GIO4 FMSO
T6 FE_IND FE_AVDD12_RX AP8 FMSO [9]
U9 AR1 FE_RXIP FMSO2
FE_AVDD33_2 FE_SRXP FMSO2 [9]
INE V6 AR3 FE_RXIN FMSO3
FE_INE FE_SRXN C607 FMSO3 [9]
FE_GND C604 INF U1 AP2 FE_TXON FMSO4
FE_INF FE_STXN 0.1uF FMSO4 [9]
0.1uF ING R1 AN1 FE_TXOP TP719 LGO1N
INH FE_ING FE_STXP A1.2V A3.3V TP721 LGO2N TRAYIN#
T2 FE_INH FE_STXVDD12 AP6 TRAYIN# [9]
W7 AN7 SPLLVDD R619 0R TP723 LGO3P TRAYOUT#
FE_AGND FE_SPLLVDD12 TRAYOUT# [9]
FE_GND FOIP V2 AL7 SXVDD R623 0R TP724 LGO3N
A1.2V FOIN FE_FOIP FE_SVDD33 TP726 LGO4P
U3 FE_FOIN FE_SXVDD33 AM6
P8 AH2 PLAY# C620 TP728 LGO5P GAINSW1
FE_AVDD12_1 FE_PLAY# GAINSW1 [9]
FE_FPDODVD T4 AG3 LIMIT# D1.2V TP730 LGO5N
C611 TP760 FE_FPDODVD FE_LIMIT V625 2.2uF C619 C623 TP750 LGO1P FG
U5 FE_FPDOCD FE_DVDD12I V10 FG [9]
0.1uF RFO- C609 0.1uF Y4 AG1 LED1 0.1uF 0.1uF TP751 LGO2P
RFO+ C610 0.1uF FE_RFIN FE_GIO3 EJECT# V14REF
Y2 FE_RFIP FE_EJECT# AH4 V14REF [9]
DRFO+ C612 0.1uF W1 AK4 TRAYOUT# TP761 GIO5
FE_GND DRFO- C613 0.1uF FE_RFIP2 FE_TRAYOUT TRAYIN# TP762 GIO6
W3 FE_RFIN2 FE_TRAYIN# AJ5
V4 FE_REG_CAP FE_GIO1 AG9 MUTE2 D1.2V OPU
AA7 AD8 MUTE1

C
FE_AGND FE_GIO0 CO_B-
A3.3V W9 FE_AVDD33_3 FE_FSOURCE AH8 V609 Test CO_B- [9]
AB8 N11 C648 C649 C650 C992 CO_B+
FE_AVDD12_3 FE_DVDD33O Point CO_B+ [9]
A1.2V AC7 N9 D3.3V 0.1uF 0.1uF 0.1uF 4.7uF CO_A+
FE_AVDD12_4 FE_DVDD33O CO_A+ [9]
P10 CO_A-
FE_DVDD33O CO_A- [9]
C614 MPX3 MPX3
FE_AVDD33_4
FE_LVDS_1P
FE_LVDS_1N
FE_LVDS_2P
FE_LVDS_2N
FE_LVDS_3P
FE_LVDS_3N
FE_LVDS_4P
FE_LVDS_4N
FE_LVDS_5P
FE_LVDS_5N

FE_GAINSW1
FE_GAINSW2
FE_GAINSW3

FE_DVDD12I
FE_DVDD33O
FE_DVDD33O
FE_DVDD33O
FE_TRAYPWM

C608 C603 C616 C1003 C1004 MPX2 MPX2 TR+

TR+ [9]

FE_GIO12
FE_GIO13
FE_SAGND

FE_CFREQ
FE_OSCEN

MPX1 MPX1 TR-

FE_CMOD

FE_FMO3
FE_FMO4

FE_FMO2

FE_AGND
0.1uF
FE_TLO
FE_TRO
FE_FOO

FE_FMO

FE_DMO

TR- [9]
0.1uF 0.1uF 0.1uF 0.1uF 0.1uF FOC1-
FOC1- [9]
TRINA1 TRINA FOC1+
FOC1+ [9]
TRINB1 TRINB FOC2-
FOC2- [9]
D3.3V TRINC1 TRINC FOC2+
FOC2+ [9]
Y6

V8

Y8
Y10
N7
AF8

AF6

AF4
AF2

AT10
AA5

AA1
AA3

AB4

AB2

AB6

AE7

AE5

AE3
AE1

AE9
AB10
AN5

AC3

AC1

AC5

AD2

AD6

AH6
AD4

AC9
AG5
AG7

AM8

FE_GND FE_GND TRIND1 TRIND

MT8530_DDR2 D1.2V D3.3V R604 10K/NC
FE_SFWP# R605 0/NC
R656 10K/NC
LGO1P
LGO1N
LGO2P
LGO2N
LGO3P
LGO3N
LGO4P
LGO4N
LGO5P
LGO5N

LDD_SDIO

FE_SFHOLD R606 0/NC

LDD_SEN

GAINSW3
GAINSW1
GAINSW2
LDD_CLK

TYPWM

GIO12
GIO13
FMO3
FMO4

FMO2

C1006
FMO
TLO
TRO
FOO

FE GND
DMO

SONY C1005 0.1uF FE_GND

0.1uF CONNECT
HA600460
C389
A3.3V

FOC1- 0.1uF FE_GND NC612

TP754
TP755

1
GAINSW

V611
V612

FR2 FOC1+ A3.3V FE_GND

FD2 2
3 TR- NC613

D
TD TR+
TR 4
5 FOC2- LDD_SDIO_OPU R1024 0 A3.3V 5V_STBY AVCC
FR1 FOC2+ R618
FD1 6
7 CO_B+ 10K LDD_CLK_OPU R1025 0
SA_B+ CO_B-
SA_B- 8
9 CO_A+ AUX1 LDD_SEN_OPU R1026 0 R647 R600 R601
SA_A+ CO_A- 12K 20K/NC 20K/NC
SA_A- 10 M
11 VDAC0# C622
SA_INT AUX1 0.1uF Trig Level is 1.2V NC608
THERMO 12
FMO3
FMO4

FMO2

13 INH RSTI
FMO

DMO
39K TLO
TRO
FOO
10K TYPWM

F INB
A 14
15 ING FE_GND AVCC R603 C600
E INA 10K 0.1uF/NC NC610
24K

16
20K

7.5K
7.5K

B
39K

3K

FB600
20K

17 Vcc_PDIC FB
VCC PD IND NO601
C 18 FE
19 FB601 FB
GND_PD Reset
20 DRFO+ NO604
DVD RF+
R632

DRFO- C1007 C1008 FE_GND

R627
R626
R634

R635
R629
R631
R630

21
R633

DVD RF- 0.1uF V14REF

GND PD 22
TOP

23 RFO+ 0.1uF C625 1000pF FMSO3 FMSO3 FMO4 TP618

BD RF+ RFO- C624 1000pF FMSO4 FMO3 FE_GND
BD RF- 24 FMSO4 TP619
25 C632 270pF TLSO TLSO FMO TP620
GND PD INC FE_GND VHAVC C630 220pF TRSO DMO NO600
D 26 TRSO TP621
INE C1009 C1010 C631 270pF FOSO FMO2 FE D3.3V
G 27 FOSO TP622 CON601
28 VHAVC C635 NC TRAYPWM TRO RS232 NO1
TRAYPWM TP623
E
VC_PD INF 2.2uF 0.1uF C627 2200pF FMSO FOO R653 33
H 29 FMSO TP624 1 NO2
30 C1011 A3.3V C629 2200pF FMSO2 FMSO2 TLO TP628 2 URXD C606
GND A3.3V C605 C628 0.01uF DMSO TYPWM UTXD
GND 31 DMSO TP629 3
0.1uF 2.2uF 0.1uF M
3.3V 32 M 4 FE_GND
C1012 R654 33
GND 33
Vcc_LD VCC_BD_LD 2.2uF
5.0V 34
35 4x1/W/HOUSING
GND VCC_BD_LD FE_GND
8.0V 36
37 U701 OPU
GND FE_GND
SDIO 38 LDD_SDIO_OPU (change to +8V) APL1117-ADJ POWER +12VM
39 LDD_CLK_OPU VCC_BD_LD
SCLK LDD_SEN_OPU FB906 VCC_OPU
SEN_LDD 40
GIO7_OPU 0 GIO7
ADJ/GND

41 R1027 FB 2 3
LDEN TEST_V 0 FE_FPDODVD OUT IN
42 R1028
TEST_V GIO4
MODE A 43
44 GIO5 C1013 C642 C730 C711 + CE706
MODE B GIO6 2.2uF 10uF 0.1uF 100uF/16V
MODE C 45
1

46 0.1uF
GND R715 120_1%
GND 47

R716 649_1%

F
P45 /0.5mm KEM-460 FE_GND

FE_GND FE_GND

SCHEMATIC DIAGRAMS (12/17)

56
 1 2 3 4 5 6 7 8
MOTOR DRIVER
GAINSW2
GAINSW2 [8]
V14REF R700 10K R702 10K
MOTOR MUTE2
MUTE1
MUTE2 [8]
MUTE1 [8]
MOTOR R701 10K R704 10K
DRIVER
V14REF R703 15K R705 10K DRIVER TRAYPWM
A
TRAYPWM [8]
FB701 U700 R706 10K DMSO
POWER V14REF DMSO [8]
VCC BLM21P DMSO 1 42 V14REF Sensorless FOSO
SPIN REF FOSO [8]
FMSO2 2 41 TRAYPWM TRSO
SL1IN LOIN TRSO [8]
FMSO 3 40 FOSO TLSO
MVCC SL2IN FOIN TLSO [8]
R707 10K 4 39 TRSO C701
SPLIN TOIN TLSO 0.1uF FMSO
M12V 5 VM2 TLIN 38 FMSO [8]
+ CE701 A+ 6 37 T L- F O C 1- FOC1- FMSO2
C715 A+ SL2+ TL- FMSO2 [8]
220uF/16v M C737 7 36 T L+ F O C 1+ M FMSO3
GND TL+ FOC1+ FMSO3 [8]
10uF A- A- 8 35 FO - F O C 2- FMSO4
SL2- FO- FOC2- FMSO4 [8]
0.1uF/16V B+ B+ 9 34 FO + F O C 2+
SL1+ FO+ FOC2+
M B- 10 33 TRAYIN#
B- SL1- GND TRAYIN# [8]
11 32 MVCC TRAYOUT#
GND 5VCC TRAYOUT# [8]
U 12 31 TR+
U TO+ TR+
M V 13 30 TR- C712 C735 FB704
V TO- TR-
FB702 W 14 29 0.1uF/16V 10uF BLM21P GAINSW1
+12VM W GND GAINSW1 [8]
FB/2A/1206 R709 NC 15 28 LOAD-
COMMON 16
ACTFLG
COMMON
LO-
LO+ 27 LOAD+ M M M
FB703 NC
FG
FG [8] B
M12V M 17 TEST VM3 26 M12V
R710 10K 18 25 ACTRST V14REF
2A SLLIM ACTRST V14REF [8]
FG 19 24 R711 0 C708 C736
FG FG STTH

M
+ CE703 MUTE1 20 23 R712 0 0.1uF/16V 10uF
220uF/16v MUTE1 EN1 SPGS
MUTE2
MUTE2 21 EN2 VM1 22 M12V OPU
M M
R2A30209SP CO_B-
CO_B- [8]
M C709 C738 R708 NC MVCC CO_B+
CO_B+ [8]
SSOP42/SMD 0.1uF/16V 10uF CO_A+
CO_A+ [8]
ACTRST R713 0 CO_A-
ACTRST CO_A- [8]
M M
M TR+
TR+ [8]
TR-
TR- [8]
FOC1-
FOC1- [8]
FOC1+
FOC1+ [8]
FOC2-
FOC2+
FOC2- [8] C
MVCC COLLIMATOR FOC2+ [8]

L868
U703
1 Vc NC 14
CO_B- 2 13 FMSO4
FB CO_B+ OUT1- IN1 GAINSW1
3 OUT1+ Mute 12 GAINSW1
TP756 CO_B- 4 11 V14REF 5x1/W/HOUSING
TP757 CO_B+ CO_A+ GND BIAS FMSO3
5 OUT2+ IN2 10
TP758 CO_A+ CO_A- 6 9
TP759 CO_A- OUT2- GND TRAYIN# TRAYIN
7 Vp NC 8 TRAYIN 5
C1014 4 GND
C1015 TRAYOUT# 3 TRAYOUT
TRAYOUT
AM2158 0.1uF/16V LOAD- 2 LOAD-
LOAD-
0.1uF/16V LOAD+ 1 LOAD+
LOAD+
D
HA700
FE_GND
C1028
C1017 C1018 C1019
0.1uF
0.1uF NC NC
C415 1000pF C416 1000pF J700

A- 0 R1029 1 M
A+ 0 R1030 2
B- 0 R1031 3
B+ 0 R1032 4
BOTTOM

5
U 0 R1033 6 MGND1
V
W
0
0
R1034
R1035
7
8
MGND E
COMMON 0 R1036 9
M

HEADER/9/SMD/1.0/BOTTOM
R1037 H9S/P1.0
0
C1020 C1021 C1022 C1023C1024 C1025 C1026 C1027

NC NC NC NC NC NC NC 0.1uF/NC

M M M
F
SCHEMATIC DIAGRAMS (13/17)

57
 1 2 3 4 5 6 7 8
MIX 2CH L/R AUDIO CNT
AMUTE
AMUTE [4,6]

U702
D6
NJM78L05uA
3 AUDIO I2S
AOMCLK

A
2 3 1 MIX_+5V_DAC AOMCLK [4]
OUT IN AOLRCK
AOLRCK [4]
AOBCK

GND
1 1SS301 Q22 AOBCK [4]
AOSDATA0
CE20 + CB8 DTA114EUA AOSDATA0 [4]
100uF/50v 0.1uF

2
+12VA NC L7 MIX_OP+12V SOT-89 MIX_+5V_DAC 3 2
AOSDATA4
AOSDATA4 [4]
CE24 + CB12
A_GND
0.1uF D5
A_GND
100uF/50v
3

21
Q21 2
---2010.05.08 A_GND 1 DTC114/EUA
MIX2CH_AMUTE1

D7
1SS301
3

3
AUDIO
2

1SS301 1 A_GND
MCU_AMUTE
MCU_IO_4 [13]
-12VA L6 MIX_OP-12V
NC R956
CE23 + CB16 39K
100uF/50v 0.1uF

C964 39pF±5%/50V

B
D8,L11.5,pitch3.5/Lead
MIX_OP-12V
A_GND ---2010.04.15

R963 R964

4
22k 8.2k U801A C75 100_1/4W
D8,L11.5,pitch3.5/Lead 100_1/4W
2 - 100uF/50v R124 R22 R66 10_1/4W
1 ML_OUT

+
ML_OUT [11]
3 +
R132
R967
BA15218F 47K_1/4W

8
4.7k
C967 220pF±5%/50V

A_GND A_GND A_GND

R133

3
2.2K
MIX_+5V_DAC MIX_+5V_DAC 1 KTC2875
Q20

2
R85 R117

3
R135 R138 10K 2.2K
NC NC Q26 1 A_GND 1 KTC2875
KTC2875 Q17

2
DEMP0 DEMP1

PCM1781: I2S Format; A_GND

R137 R139
10K 10K A_GND
C539
U802
R134 10K 1 16

C
DEMP0 FMT ZEROA
2 DEMP0 VOUTL 15 CE17 10uF/16v
DEMP1 3 14
MCU_AMUTE DEMP1 VOUTR MIX_+5V_DAC C540
4 MUTE VCOM 13
5 12

+
SCK AGND
6 DATA VCC 11
10uF/50v
7 10 10uF/16v
BCK NC
8 LRCK TEST 9
AOLRCK R78 33

AOSDATA0 R954 0 R74 33 R957

PCM1781 39K
AOSDATA4 R955 0/NC AOBCK R67 33

Only 2 channel: AOSDATA0; AOMCLK R116 33 C965 39pF±5%/50V 1.0x0.5mm/SMD

Down-Mix: AOSDATA4 A_GND
C22 C23 C24 C25 R968
33pF 33pF 15pF 33pF 4.7k
R965 R966

4
22k 8.2k U801B C77
6 - 100uF/50v D8,L11.5,pitch3.5/Lead R88 100_1/4W R93 100_1/4W R9510_1/4W
R80 0 MR_OUT

+
7 MR_OUT [11]
5 +
R79 0 C968 R89
BA15218F 47K_1/4W

8
220pF±5%/50V
A_GND 1.0x0.5mm/SMD
MIX_OP+12V
A_GND A_GND A_GND
R90

3
2.2K

D
1 KTC2875
Q15
---2010.04.15

2
R84 R83

3
10K 2.2K
Q25 1 A_GND 1 KTC2875
KTC2875 Q11
MIX_OP+12V

2
---2010.04.15
R130
100K
A_GND
R122
A_GND
0
5V_STBY
MIX_OP-12V
1

1SS301
D3 Q13
3 KTA1268
2 MIX2CH_AMUTE
2

+ CE18
+ CE31
1

470uF/16v R136
470uF/16v

MIX_OP+12V
A_GND R121
2.2k

E
D4
R123
D866
2

MCU_AMUTE 3 Q18 47K

Q16 R140 7.5V_ZENER
2

2 1 DTC114EUA
1
MT8530_AMUTE 1
1K R126
3

Q12 4.7K
3

1SS301 2.2k 2N3904

DTC114EUA 1

AMUTE MT8530_AMUTE A_GND A_GND

A_GND
3

A_GND

AUDIO DATA SIGNAL LINE

F
SCHEMATIC DIAGRAMS (14/17)

58
 1 2 3 4 5 6 7 8
VCC
AV
ASPDIF CONNECTOR AV
J861
Y1
R862 Y1 [4]
FB861 R863 2.2K RCA2X3 Y2

2
ASPDIF
1.8K
1 Q211
Y3
Y2
Y3
[4]
[4] A
2N3904 R868 68 C868
BLM15A Y6
Y6 [4]
COAXOUT

3
1
ML_OUT
ML_OUT [10]

2
3
4

5
6
7

8
9
C877 C878 1uF P6
MR_OUT
R864 R866 NC NC R869 MR_OUT [10]
3.9K 220 100K

2
ASPDIF
COAX CVBS ASPDIF [4]
A_GND
G/Y
R/V
B/U
MR_OUT
ML_OUT
ML_OUT
ML_OUT [10]
MR_OUT
MR_OUT [10]
B

Y6
Y3 Y2
75_1% R567

75_1% R571

75_1% R587

75_1% R580

75_1% R591

75_1% R588
22uH

VCC

GND_AV GND_AV
GND_AV
L83
Y1 GND_AV
C
75_1% R595

75_1% R592

+5V_AV
NC

L82 +5V_AV
C32
C476 C477 R573 75_1% 470uF/6.3vR572 0

R581

R582
CE30 CVBS

+
+
U18
1000pF 0.1uF GND_AV R574 NC
10K 10K C181 C183
NC
V_MUTE 1 32 NC
100uF/50v PS1 S1
2 31 GND_AV
SCIN S2
GND_AV
3 V+1 SDCOUT 30
C478
4 29
0.1uF NC SCOUT 1

GND_AV 5 MIXSW NC 28
R558 75_1%
C29
470uF/6.3vR557 0 D
C544 10uF
GND_AV Y6 G/Y

+
6 VIN VOUT 27
C172
+5V_AV C153 0.1uF R559 NC
GND_AV 7 26 C161 C162
GND1 V+4 NC NC
GND_AV NC
8 25 GND_AV
SYIN SYOUT 2
R575 0 GND_AV
9 24 C163
CBSW GND4
C541 10uF GND_AV NC
Y2 10 23
GND_AV YIN YOUT GND_AV
0.1uF
11 22 C160 C30
C479 V+2 V+3
GND_AV R563 75_1% 470uF/6.3vR562 0
B/U

+
12 NC PBOUT 21
0.1uF
C166 R564 NC C164 C165
GND_AV 13 GND2 NC 20 NC
3
E
C542 4 NC NC
10uF
GND_AV Y3 14 19 GND_AV
PBIN GND3 GND_AV
GND_AV
COMP_MUTE 15 18
PS2 PROUT
C543 10uF
Y1 16 17 LPF_HD_ED C182
R578 PRIN LPFSW
0 NC C31
MCU_IO_12 COMP_MUTE +5V_AV
R576 GND_AV R569 75_1% 470uF/6.3vR568 0
0 NJM2566AV R/V COMPONENT OUTPUT SIGNAL LINE
+

MCU_IO_6 V_MUTE
R570 NC
MCU_IO_16
C179
NC
C180 VIDEO OUTPUT SIGNAL LINE
MCU_IO_16 [13]
R583

NC
MCU_IO_6
MCU_IO_6 [13] AUDIO DATA SIGNAL LINE
MCU_IO_12 GND_AV
MCU_IO_12 [13] R577 NC
VIDEO_DRIVEV_MUTE MCU_IO_16
0
LPF_HD_ED F
SCHEMATIC DIAGRAMS (15/17)

59
 1 2 3 4 5 6 7 8
LAN-3.3V LAN_VDDA LAN-3.3V
FB903 LAN_VDDA ETMDC
ETMDC [6]
ETMDIO
ETMDIO [6]
R931 10
FB/0603 ETTXCLK
ETTXCLK [6]
C975 C976 C977 C978 C979 ETTXD0
ETTXD0 [6]
0.1uF 0.1uF 0.1uF 10uF 0.1uF/16V ETTXD1
ETTXD1 [6]
C980
0.022uF/50V
ETTXD2
ETTXD3
ETTXD2 [6] A
ETTXD3 [6]
R983 R927 R928 R929 R930 ETTXEN
ETTXEN [6]
1.5K 49.9 49.9 49.9 49.9
ETRXCLK

12

27
ETRXCLK [6]

1
U901 ETRXD0
ETRXD0 [6]
ETRXD1
ETRXD1 [6]

VDDIO
P900

VDD1A

VDD2A
ETRXD2
TP_TX+ 1 ETRXD2 [6]
ETRXD3
ETRXD3 [6]
30 TP_RX- ETRXDV
RXN TP_TX- 2 ETRXDV [6]
31 TP_RX+ ETRXER
RXP ETRXER [6]
1 1 6 6 PWFBOUT
ETMDIO R984 33 LAN0_ETMDIO C981 C982 3 ETCOL
16 MDIO ETCOL [6]
ETMDC R985 33 LAN0_ETMDC 17 18pF 18pF TP_RX+ 2 5 RJ-45 ETCRS
MDC 2 5 4 ETCRS [6]
ETRXD3 R986 0 LAN0-ETRXD3 8
ETRXD2 R987 0 LAN0-ETRXD2 RXD3/PHYAD2 RESET#
9 RXD2/RMIISEL 3 3 4 4 RESET# [1,6]
ETRXD1 R988 0 LAN0-ETRXD1 5
10 RXD1/MODE1
ETRXD0 R989 0 LAN0-ETRXD0 11 28 TP_TX- PHY_RESET#
RXD0/MODE0 TXN 6 PHY_RESET# [4]
ETRXDV R990 0 LAN0-ETRXDV TP_TX+
B
26 RX_DV TXP 29 RClamp0524S D23
ETRXCLK R991 47 LAN0-ETRXCLK 7
ETRXER R992 0 LAN0-ETRXER RX_CLK/PHYAD1 7
13 RX_ER/RXD4/PHYAD0 C983 C984
18pF TP_RX- 8
ETTXER R996 0 INT/TXER/TXD4 18 18pF
INT/TX_ER/TXD4 ETTXER
ETTXEN R993 0 21 ETTXER [6]
ETTXCLK R994 47 LAN0-ETTXCLK 20 TX_EN LU1S041X/LF
TXCLK LED1/REGOFF 3
ETTXD0 R995 0 LAN0-ETTXD0 22 2 LED2/NINTSEL
ETTXD1 R997 0 LAN0-ETTXD1 23 TXD0 LED2/NINTSEL Include Filter
ETTXD2 R998 0 LAN0-ETTXD2 24 TXD1
ETTXD3 R999 0 LAN0-ETTXD3 25 TXD2
ETCOL R1001 0 LAN0-ETCOL TXD3
15 COL/CRS_DV/MODE2
ETCRS R1002 0 LAN0-ETCRS 14 CRS

VDDCR 6

LAN0_RESET# 19 Nrst
C985 C986 C
0.1uF 4.7uF
R1003 1M 5 XTAL1/CLKIN
4 XTAL2
RBIAS

LAN-3.3V
VSS

MTK Reservations FB904 FB/NC

3.3V_STBY LAN-3.3V
SMSC8710 R1004 10K R1005 10K/NC
Y900
32

33

LAN0-ETRXD0
R1006 10K R1007 10K/NC FB905 FB
LAN0-ETRXD1
3.3V
R1008 R1009 10K R1010 10K/NC
C987 25.0000MHz C988 LAN0-ETCOL C989
33PF 33PF 12.1K_1% 0.1uF/16V C990
22uF/10v

LAN-3.3V LAN-3.3V
LAN-3.3V D
LAN0-ETRXD2 MTK Reservations INT
R1022 0/NC R1013 10K/NC
PHY_RESET# R1011 R1038 10K R1012 10K/NC INT/TXER/TXD4
10K/NC LAN0-ETRXER
R1015
RESET# LAN0_RESET# LAN0-ETRXCLK R1016 10K/NC
MII R1018
10K 10K/NC
R1014 0 LAN0-ETRXD3 R1017 10K/NC LED2/NINTSEL
C991
0.1uF/16V
Address: 00h

F
SCHEMATIC DIAGRAMS (16/17)

60
 1 2 3 4 5 6 7 8
IIC ISP Interface MCU_IIC_SDA
GND
JT9
1 1
CCIR_IN_Y9
MCU CS8966F GPIO LIST
2 2 CCIR_IN_Y9 [7]
MCU_IIC_SCL 3 3
MCU_2.5V
RSTN 4 4 TO MT8530 PIN NAME PIN FEATURES AND NET OFF
MCU_3.3V
4x1/W/HOUSING
E19 5V_STBY
P3.7 1 DC_DET DC_DET
FB21 NC MCU_3.3V
C62 R68 R71 R70 MT8530_PS_ON# :H--->MCU UPGRADING MODE MCU_3.3V P3.6 2 MCU_SPI_DO Hi-Z Hi-Z
R293 NC MCU_SPI_DO
0.1uF/16V D21 NC 0
L--->MCU NORMEAL MODE U11

4
1SS355 470 R313 NC MCU_PS_ON# 10K
R62
R296 NC MCU_SPI_CS P3.5 3 MCU_SET1 MCU_SET1

CNTL
1 FB18 FB/0805
POK

A
2 EN
R69
R383
MCU_3.3V R336 10K MCU_IO_4 P2.3 4 MCU_SET2 MCU_SET2
6 CE15 100uF/6.3v
BD4829G 4.7K RESET CCIR_IN_Y9 MT8530_PS_ON# VOUT
R339 10K MCU_IO_5 3 +
4

VIN
R376
R338 10K MCU_IO_7 CE14 R65 C36 P2.2 5 PS_ON# PS_ON# Hi-Z
N.C.

0 + C42 1.25K_1% 0.1uF/16V

1 RSTN 47K R291 4.7K MCU_SCL

GND
GND
VOUT 1 100uF/6.3v 0.1uF/16V 7

NC
R358 4.7K MCU_SDA FB

2
P4.1 8 MCU_SDA MT8530 SDA Hi-Z
D1 2 1 Q216 C53

5
9
8
VDD 2 BAT54C 2N3904 uP7706U8 R63
+ CE28
C67 MCU_PS_ON# 3 C184 R381
PS_ON# R290 10K KEY_IN_A R64
30K_1% P4.0/CEC 9 MCU_CEC_IN HDMI_CEC_IN

3
1000pF TO MCU PIN 5 1uF 47K NC
3 100uF/6.3v R289 10K KEY_IN_B
N.C.

GND R380
Close
47K R382
R360 10K MCU_IO_13
10K_1% P3.4 10 MCU_SPI_CS Hi-Z Hi-Z
to 47K
R367 10K AC_DET1
5

U14 MCU
P4.3 11 MCU_SCL MT8530 SCL Hi-Z
MCU_3.3V R359 NC MCU_IO_14
Q3 R340
2N3906 R270 MCU_IO_16 47K MCU_IO_16
R361 NC MCU_IO_15 MCU_IO_16 [11]
3 2 1K DC_DET
R170 NC MCU_IO_9 MCU_IO_6
R357
47K MCU_IO_6 P4.2 16 MCU_SET3 MCU_SET3
MCU_IO_6 [11]
R362
R275 R277 R370 NC MCU_IO_17 MCU_IO_12 47K MCU_IO_12
MCU_IO_12 [11]
47K 47K P1.7 17 MCU_IO_4 MCU_AMUTE
1

R365 NC MCU_IO_18
MCU_3.3V TSSOP8
MCU_3.3V
U304 R364 10K MCU_IO_19 P1.6 18 MCU_IO_5 HDMI_POWER_CTRL
C321 1 8 R366 NC MCU_IO_20
R276 NC VCC
100K 0.1uF/16V 2 NC WP 7 R368 NC MCU_IO_21 P1.5 19 MCU_IO_6 VIDEO_DRIVE_V_MUTE Hi-Z
3 6 MCU_SCL
NC SCL MCU_SDA R325 NC TXD_0
4 GND SDA 5
R299 10K RXD_0 P1.4 20 MCU_IO_7 CEC_RS232_SWITCH
D22 D27 D28 GT24C02-2ZLI-TR R266
D29 33
1SS355 1SS355 1SS355 MCU_IIC_SDA
1SS355 SDA [5] P1.3 21 MCU_IIC_SCL MCU_IIC_SCL
B
MCU_IIC_SCL
SCL [5]
33 R267

IO_18 MCU_2.5V
AC_DET1 TO MT8530 P1.2 22 MCU_IIC_SDA MCU_IIC_SDA
3.3V +12VA
VCC_P MOTO_+12V 0.1uF/16V
C722 P1.1 23 AC_DET1 AC_DET1

2
MCU_3.3V

RSTN
MCU_IO_21

MCU_IO_20

MCU_IO_19

MCU_IO_18

MCU_IO_17

MCU_IO_16

MCU_IO_15

MCU_IO_14
C171 Q27 1 R373 10K AC_DET AUDIO
10uF 2SC2458 P1.0 24 MCU_IO_12 VIDEO_DRIVE_COMP_MUTE Hi-Z
MCU_IO_4

3
MCU_3.3V R256 C169 C170 MCU_IO_4 [10]
100uF/6.3V 0.1uF/16V P0.7 25 RXD_0 RXD_0
100
10K NC NC 33 NC NC 33 33 33
R297 MCU_SET1
R294 10K MCU_SET2 P0.6 26 TXD_0 TXD_0
R346

R347

R350

R349

R354

R351

R353

R352

MCU_2.5V C178
R320 NC MCU_SET1
R323 NC MCU_SET2
100pF/NC P0.5/ADC2 27 KEY_IN_B KEY_IN_B

P0.4 28 MCU_IO_10 MCU_IR_IN

44

43

42

41

40

39

38

37

36

35

34

MCU_3.3V
Default for DENON R298 10K MCU_SET3
MCU_IO_5
MCU_IO_5 [4] MCU_IO_14
P2.5/T2/CMPC
PGAIN1/P3.3/CEX5

P2.6/CMPB

VDD
P2.4/T2EX/CMPD

VDD25
RSTN

MCU_LED_CTRL_A [1] P0.3/ADB2 29 KEY_IN_A

P2.7/CMPA/SWA0
PGAOUT/P3.2/CEX4

P3.1/CEX3/SWA2/CMPA

P3.0/CEX2/SWA1/CMPA

R356 10K MCU_SET4

KEY_IN_B KEY_IN_A
KEY_IN_B [1] MCU_IO_15
KEY_IN_A MCU_LED_CTRL_B [1]
KEY_IN_A [1]
R324 NC MCU_SET3 MCU_IO_13
MCU_IO_13 [1] P0.2 30 MCU_SET4 MCU_SET4
R372 NC MCU_SET4 MCU_LED_CTRL P0.1 31 MCU_IO_9 Hi-Z
1 PGAVMID/P3.7/SPICLK VSS 33 Default for DENON MCU POWER STBY
PS_ON#
PS_ON# [1] P0.0 32 MCU_IO_13 POWER STBY KEY
MCU_SPI_DO NC R271 2 32 R282 33 MCU_IO_13
PGAIN2/P3.6/MISO P0.0/PINT1.0/ADA1
MCU_SET1

MCU_SET2
SPI_DO
33

33
R261

R260
3

4
PGAOUT2/P3.5/MOSI P0.1/PINT1.1/ADA2 31

30
R281

R284
NC

1K
MCU_IO_9

MCU_SET4
P2.4 37 MCU_IO_14 RED LED CONTROLL A
C
P2.3/RXD1 P0.2/PINT1.2/ADB1
P2.5 38 MCU_IO_15 GREEN LED CONTROLL B
MCU_PS_ON# 33 R258 5 29 R283 4.7K KEY_IN_A
MCU_PS_ON P2.2/TXD1 P0.3/PINT1.3/ADB2 KEY_IN_A AC_DET
AC_DET [1]
33 R254 6 P2.1/XOUT P0.4/PINT1.4/ADC1 28 33 R269 MCU_IO_10 P2.6 39 MCU_IO_16 VIDEO_LPF_CTRL Hi-Z
X4
33 R253 7 27 4.7K R272 KEY_IN_B
P2.0/XIN P0.5/PINT1.5/ADC2 KEY_IN_B
P2.7 40 MCU_IO_17 Hi-Z
11.0592MHz MCU_SDA 33 R341 8 26 R274 33 TXD_0
MCU_SDA P4.1/SDA2 P0.6/TXD0/ADD1 TXD_0
R226
100 R259
1M MCU_CEC_IN MCU_CEC_IN 9 P4.0/CEC P0.7/RXD0/ADD2 25 R273 33 RXD_0
RXD_0 P3.0 41 MCU_IO_18 Hi-Z
C168
C167 MCU_SPI_CS NC R288 10 24 R286 33 MCU_IO_12
SPI_CS P3.4/SS P1.0/ADD3/CEX0
22pF 22pF
CEC P3.1 42 MCU_IO_19 AMX_POWER
MCU_SCL 33 R287 11 23 R285 1K AC_DET1 CEC [4]
MCU_SCL P4.3/SCL2 P1.1/ADD4/CEX1
P1.7/T0/SWB0/PINT0.1

P1.6/T1/SWB0/PINT0.0

HDMI-CEC
HDMI-CEC [4] P3.2 43 MCU_IO_20 Hi-Z
P1.3/SCL/SWC1

P1.2/SDA/SWC0

P3.3 44 MCU_IO_21 Hi-Z

P4.2/SWB3

P1.5/SWC3

P1.4/SWC2

3.3V_STBY
RXVDD

RXOUT
RXIN
VSS

R222 +12VM D208

1N4001
NC
12

13

14

15

16

17

18

19

20

21

22

U16
CS8966F-PQFP44 U704
D24
AZ1117-ADJ
R343

R342

R344

R348

D206 NC/RB521S
R345

6V_FAN CN5
NC

D
MCU_3.3V 3 IN OUT 2 1
IR_IN MCU_3.3V 1K 33 33 33 33 CEC 3 2

ADJ
IR_IN [1] R172
2
TO MT8530 # E43 MCU_3.3V
2SK3018(ROHM)
1k
MCU_IIC_SCL

MCU_IIC_SDA

MCU_IO_10 MCU_IR_IN C37 CE25 220uF/16v

Q213 R212 + CE16

1
R221

0.1uF/16V
+ 2PIN1.25/NC

1
MCU_IO_4

MCU_IO_5

MCU_IO_6

MCU_IO_7
MCU_SET3

27K CB67
NC 100uF/16v
Q24
D207

3
DTA114EUA 0.1uF/16V
1N4001
R225 R173
10K D205
MCU_IO_7 1
1N4148 820
IIC_SCL

IIC_SDA

MCU_3.3V
R230
STANDBY : H

2
HDMI-CEC

TP765
POWER ON : L R229
R214 6.8M
10K C1030
NC
R218 15pF/NC HDMI
MCU_3.3V NC
IR_IN

D209 D26 NC/RB521S CLOSE HDMI

NC
R127 C69 SOCKET
33K 0.1uF/16V
MCU_CEC_IN 3 2
W_REMOTE
W_REMOTE [1] CON12/1.0 2SK3018(ROHM)
MCU_IR_IN TO MCU # 9 Q214
1

R228
W_REMOTE 1
R129
2

IR_RC_EN 2
Q10 IR_RC_IN 10K
1 3
2SC2458 4

E
5V_STBY 5
R12847K
3

6
TOP

18K 5V_STBY 7
AMX_POWER 8
MCU_SET1 9
DTA114EUA
3

R125 MCU_SET2 10
47K MCU_SET3 11
Q19 MCU_SET4 12
1 IR_RC_EN

MCU_IO_19 AMX_POWER
J306
2

R131
NC

D19

1SS133/355

F
SCHEMATIC DIAGRAMS (17/17)

61
EXPLODED VIEW dh

WARNING:
Parts marked with this symbol have critical
characteristics.
Use ONLY replacement parts recommended by
the manufacturer.

 印の部分は安全を維持するために重要
62
な部品です。従って交換時は必ず指定の
部品を使用してください。
PARTS LIST OF EXPLODED VIEW sdfh
zParts for which "nsp" is indicated on this table cannot be supplied.
zP.W.B. ASS'Y for which "nsp" is indicated on this table cannot be supplied. When repairing the P.W.B. ASS'Y, check the board parts table and order replacement parts.
zPart indicated with the mark " ★ " is not illustrated in the exploded view.
zThe parts listed below are for maintenance only, might differ from the parts used in the unit in appearances or dimensions.

Note: The symbols in the column "Remarks" indicate the following destinations.
B : Black model SG : Silver Gold model
U : U.S.A. & Canada model N : Europe model R : Russia model
K : China model S : Asia model

Ref.No. Part No. Part Name Remarks Q'ty New

2 972631000030S POWER PWB UNIT 7025HV1002014 1 *

NOTE :
To replace the POWER PWB UNIT, attach the following parts before replacement, except the U model.
JP1 972641000510S AC INLET N,S,K,R

3 972631000070S REMOTE PWB UNIT 7025HV1003011 1

NOTE :
To replace the REMOTE PWB UNIT, please set a resistor according to 48 page of "Destination Setting".

5 963633100030S SUB POWER PWB UNIT ASSY 7025HV1002015 1

6 972631000060M DISPLAY PWB UNIT ASSY(UD5005) 7025HV1003212 1

4 nsp USB PWB UNIT

8 nsp CHASSIS 3200213776100S 1

9 nsp LEG 4007210651000S 4
A 972304000520S BD MAIN UNIT(UD5005) 7025HV1003010 1
1 nsp MAIN PWB UNIT ASSY - 1
11 963309100070S BD MECHA UNIT ASSY 8038041669010S 1
11a 45301003200AS CLAMPER ASS'Y for BD MECHA (F-9332H) MZ11-138 - 1
★ 67 nsp 9P FFC(1.0) N711091033810S 1
12 nsp MECHA BRACKET 4010215106100S 1

NOTE :
After replace the BD MAIN UNIT,when the remote controller does not work,please use the following parts.
★ 60 00MYU12090540 12P FFC

13 nsp DAMPER (60X10) 4050213415000S 1

14 nsp DAMPER (40X35) 4050213425000S 1
15 nsp DAMPER (75X35) 4050213435000S 2
17 nsp HEAT SHEET (25X25 T1.5) 1210211539000S 1
19 nsp HEAT SINK 2120211958000S 1
20 nsp SPRING 3720210466000S 2
21 nsp FRANGE NUT-M3 1520210416000S 2
22 nsp MECHA COVER 4010215116000S 1
23 nsp DAMPER SHEET 50X40 CGX1A418Z 4050213445000S 2
24 nsp C1M LASER CAUTION 5507000004450S 1
43 nsp ALUMINUM TAPE 35mm 1220210978000S 1
51 nsp BUFFER 45x140x2t - 1
52 nsp BUFFER 30x140x2t - 1
53 nsp BUFFER 40x110x2t - 2
★ 68 963606501720S FFC 45P 100MM 0.5MM AD L301101450010S 1 k
16 nsp LICENSE LABEL 5507000005460S 1

63
 Ref.No. Part No. Part Name Remarks Q'ty New
23 nsp DAMPER SHEET 50X40 CGX1A418Z 4050213445000S 1
25 nsp REAR PANEL(5005/U) U 3207213796000S 1 *
25 nsp REAR PANEL(5005/N) N,S,R 3207213796010S 1 *
25 nsp REAR PANEL(5005/K) K 3207213796020S 1
26 nsp RUBBER SHEET (7X10X10.5) 4050213375000S 1
27 963685100020S DC FAN (RDL6025S_60X60X25) G720602504510S 1
28 nsp SPACER (D7.5X3.5XT1.0) 1530210302000S 3
B 972402000290M FRONT PANEL ASSY(UD5005/B) BK - 1 *
B 972402000300M FRONT PANEL ASSY(UD5005/SG) SG - 1 *
29 nsp FRONT PANEL (5005BK) BK 3067215188000S 1 *
29 nsp FRONT PANEL (5005SG) SG 3067215188010S 1 *
30 nsp MARANTZ BADGE (AL) FOR M1 MODEL 5630210678000S 1
31 nsp INNER PANEL (5005BK) CENTER BK 3067215151200S 1
31 nsp INNER PANEL (5005SG) CENTER SG 3067215151300S 1
32 nsp BLIND SHEET(5005) 4050213389000S 1
33 nsp GASKET SHEET (5005) LEFT 4400210629000S 1
34 nsp GASKET SHEET (5005) RIGHT 4400210639000S 1
35 nsp INNER PANEL (5005BK) LEFT BK 3060215161200S 1
35 nsp INNER PANEL (5005SG) LEFT SG 3060215161300S 1
36 nsp INNER PANEL (5005BK) RIGHT BK 3060215171200S 1
36 nsp INNER PANEL (5005SG) RIGHT SG 3060215171300S 1
37 nsp LENS (5005/POWER) 3710211131000S 2
38 nsp POWER KNOB (5005BK) BK 5097214631000S 1
38 nsp POWER KNOB (5005SG) SG 5097214631100S 1
39 nsp KNOB 2P (5005BK) BK 5097214641000S 2
39 nsp KNOB 2P (5005SG) SG 5097214641100S 2
40 nsp KNOB 3P (5005BK) BK 5097214651000S 2
40 nsp KNOB 3P (5005SG) SG 5097214651100S 2
41 nsp WINDOW (5005) 5077214631000S 1
42 nsp EMIGASKET NLCG100100 4400210619000S 1
44 418410024006M LOADER ESC (5005BK) BK 4317215358000S 1
44 418410024013M LOADER ESC (5005SG) SG 4317215358100S 1
45 418510025008M LOADER PANEL (5005BK) BK 3217212161000S 1
45 418510025015M LOADER PANEL (5005SG) SG 3217212161100S 1
46 nsp L/P SPRING 3720210456000S 2
47 418510022009D LOADER BASE (5005BK) BK 3217212151000S 1
47 418510022016D LOADER BASE (5005SG) SG 3217212151100S 1
48 972403000450S TOP COVER (BK) BK 3007211856000S 1
48 972403000460S TOP COVER (SP) SG 3007211856100S 1
49 nsp PEF SHEET (15X50XT3.0) 4050213395000S 2
50 nsp BUFFER 40x260x5t - 1
54 nsp BUFFER 20x40x10t - 2
55 nsp BUFFER 20x180x10t - 1
★ 56 47401000200AS MECHA DAMPER - 4

SCREW
101 nsp 3X8 CBTS (S)-B B020930083B10S 21
102 nsp SPECIAL SCREW 1500210606000S 2
103 nsp 3X6 CBTS(S)-B B020930063B10S 9
104 nsp 3X6 CPTS (S) ROUND 1500210646000S 13
105 nsp FIXING SCREW B020030103B11S 6

64
 Ref.No. Part No. Part Name Remarks Q'ty New
106 nsp SCREW B020030083P10S 32
107 nsp 3P. SWELLING SCREW BK BK 1500210636000S 4
107 nsp 3P. SWELLING SCREW SP SG 1500210636100S 4
108 nsp SPECIAL SCREW 1500210626000S 2

WIRES
12P FFC
★ 60 00MYU12090540 - 1
(for BD MAIN PWB and REMOTE PWB connection)
★ 61 00MYU15080520 15P FFC N711150833810S 1
★ 62 nsp 5P CON. L002261050050S 1
★ 63 nsp 13P CON. L002201130050S 1
★ 64 00MYU20100520 20P FFC N711201033810S 1

PARTS LIST OF P.W.B. UNIT df

Ref.No. Part No. Part Name Remarks Q'ty New
POWER PWB UNIT(UD5005) : Ref.No. 2
z F1 972652000210S FUSE(3.15AH/250V) G650202255510S 1
z T1 972102000220S SW.TRANS 8200380285020S 1
z JP1 972641000080S AC INLET (AC-M34U) U G430341535510S 1 *
z JP1 972641000510S AC INLET (AC-M34) N,S,K,R G430040600020S 1

REMOTE PWB UNIT : Ref.No. 3

JK1 00D2048729008 2P MINI JACK HSJ1003-016010WA G401HSJI05500S 1
S401 664010012008S SWS-A SLIDE SWITCH G060040110110S 1
JK3 972646000190M 2P RCA JACK MSP-242V1-24 NI FE-ABS(S191) G601242V1240MS 1

BD MAIN UNIT : Ref.No. 1

P900 972646000090S ETHERNET TERM. G4060RJ455510S 1
J200 972646000100S HDMI Connecter L109101905510S 1
P6 972646000110S COAX Connecter G600210020000S 1
J861 972646000120S AV 6P JACK G603210000000S 1
D25 972646000130S USB Connecter G480250045510S 1

65
PACKING VIEW sd

66
PARTS LIST OF PACKING VIEW sdf
zParts for which "nsp" is indicated on this table cannot be supplied.
zPart indicated with the mark " ★ " is not illustrated in the exploded view.
zThe parts listed below are for maintenance only, might differ from the parts used in the unit in appearances or dimensions.

Note: The symbols in the column "Remarks" indicate the following destinations.
B : Black model SG : Silver Gold model
U : U.S.A. & Canada model N : Europe model R : Russia model
K : China model S : Asia model

Ref. No. Part No. Part Name Remarks Q'ty New

1 nsp ENVELOPE 6337040062010S 1
2 541110470014M USER GUIDE(UD5005/U) U 5707000004840S 1 *
2 541110471017M USER GUIDE(UD5005/N) N 5707000005170S 1 *
2 541110472003M USER GUIDE(UD5005/S) S 5707000005200S 1 *
2 541110477008M USER GUIDE(UD5005/R) R 5707000005190S 1 *
2 541110473006M USER GUIDE(UD5005/K) K 5707000005180S 1 *
3 nsp WARRANTY USA U 5727000000111S 1
4 nsp WARRANTY CANADA U 5727041650142S 1
5 nsp ADDENDUM SHEET(UPDATE_YOUTUBE) 5227000001880S 1
6 nsp ADDENDUM SHEET (3D) FOR E3 U,N,S 5227000002030S 1
6 nsp ADDENDUM SHEET(3D) FOR E2 N 5227000002040S 1
6 nsp ADDENDUM SHEET(3D) FOR OTHER R,K 5227000002050S 1
7 nsp CABINET COVER 6327040022012S 1
8 972532000480M CUSHION (5005) -L, R 6230212994000S 1
9 nsp POLY COVER 6337040062010S 1
z 10 972611000410S AC CORD 2000mm UL 7A 125V U L068125075550S 1
z 10 972611000420S AC CORD 1500mm CB 2.5A 250V N,S,R L068250250440S 1
z 10 972611000440S AC CORD 2000mm CCC 10A 250V K L068125100220S
11 nsp YAF11-0745N 3PIN RCA (VIDEO&L/R) 1.5M L063152030020S 1
12 nsp TWIN SHIELDED WIRE WITH RCA PLUGS L063102010110S 1
13 nsp BATTERY(R03X2) G670001R50220S 1
14 307010078008M RC005UD REMOCON UNIT C.G.DEVELOPMENT 8300005000010S 1
15 972531000380M CARTON CASE (UD5005) 6007211830020S 1
16 nsp CONT. LABEL (5005/U1B) SUB ASSY U1B 5507000007500S 1 *
16 nsp CONT. LABEL (5005/N1B) SUB ASSY N1B 5507000007500S 1 *
16 nsp CONT. LABEL (5005/N1SG) SUB ASSY N1SG 5507000007500S 1 *
16 nsp CONT. LABEL (5005/S1B) SUB ASSY S1B 5507000007500S 1 *
16 nsp CONT. LABEL (5005/S1SG) SUB ASSY S1SG 5507000007500S 1 *
16 nsp CONT. LABEL (5005/R1B) SUB ASSY R1B 5507000007500S 1 *
16 nsp CONT. LABEL (5005/K1B) SUB ASSY K1B 5507000007500S 1 *
17 nsp LABEL(NETFLIX) U 5507000005540S 2
18 nsp LABEL FOR PKG SG N1SG,S1SG 5507000004600S 2
19 nsp GOST_LABEL(CARTON) N,R 5507000005560S 2 *
20 nsp LABEL(GOST_MZ) N,R 5507000005850S 2 *
21 nsp PARTITION_BOARD 6240210960000S 2

67
SEMICONDUCTORS
Only major semiconductors are shown, general semiconductors etc. are omitted to list.
The semiconductor which described a detailed drawing in a schematic diagram are omitted to list.

1. IC's
CS8966-PQFP44 (Main UNIT : U16)

P0.0 / PINT1.0 / ADA1

P0.1 / PINT1.1 / ADA2

P0.2 / PINT1.2 / ADB1

P0.3 / PINT1.3 / ADB2

P0.4 / PINT1.4 / ADC1

P0.5 / PINT1.5 / ADC2

P0.7 / RXD0 / ADD2

P1.0 / ADD3 / CEX0

P1.1 / ADD4 / CEX1

P0.6 / TXD0 / ADD1
VSS
33

32

31

30

29

28

27

26

25

24

23
VDD25 34 22 P1.2 / SDA / SWC0

VDD 35 21 P1.3 / SCL / SWC1

RSTN 36 20 P1.4 / SWC2

P2.4 / T2EX / CMPD 37 19 P1.5 / SWC3

P2.5 / T2 / CMPC 38 18 P1.6 / T1 / SWB1 / PINT0.0

CS8966F
P2.6 / CMPB 39 17 P1.7 / T0 / SWB0 / PINT0.1
PQFP-44
P2.7 / CMPA / SWA0 40 16 P4.2 / SWB3

P3.0 / CEX2 / SWA1 / CMPA 41 15 RXOUT

P3.1 / CEX3 / SWA2 / CMPA 42 14 RXIN

PGAOUT1 / P3.2 / CEX4 43 13 RXVDD

PGAIN1 / P3.3 / CEX5 44 12 VSS

10

11
1

9
P4.0 / CEC
P2.0 / XIN
PGAVMID / P3.7 / SPICLK

PGAIN2 / P3.6 / MISO

PGAOUT2 / P3.5 / MOSI

P3.4 / SS
P2.3 / RXD1

P2.2 / TXD1

P2.1 / XOUT

P4.1 / SDA2

P4.3 / SCL2

Terminal Function
I/O Port Definition
Pin# Assignment Function Function Description
I/O Normal OFF
Detection signal is for DC short circuit(3.3V;+5V and +12V).It
1 DC_DET I Low(0V) High(3.3V)
only work in power-on mode.
2 Port 3.6 GPIO - Hi-Z Hi-Z Not use
High(3.3V) High(3.3V)
3 MCU_SET1 I MCU setting pin by externail resistance. Default is high
or Low(0V) or Low(0V)
High(3.3V) High(3.3V)
4 MCU_SET2 I MCU setting pin by externail resistance. Default is high
or Low(0V) or Low(0V)
Power enable is to control the system power on/off. High is for
5 MCU_PS_ON# O High(3.3V) Hi-Z(0V)
the system power on and low is for standby mode.
6 XOUT O - - XOUT Crystal Oscillator Output
7 XIN I - - XIN Crystal Oscillator Input
8 MCU_SDA I/O High(3.3V) High(3.3V) I2C DATA signal is for EEPRM IC (24C02).
HDMI CEC signal input. It wakes-up to the system to power on
9 MCU_CEC_IN I High(3.3V) High(3.3V)
when receive the CEC power command in standby mode.
10 Port 3.4 GPIO - Hi-Z Hi-Z Not use
11 MCU_SCL O High(3.3V) High(3.3V) I2C Clock signal is for EEPRM IC (24C02).
12 VSS POWER - - Ground Voltage 0V
13 RXVDD POWER - - VDD for RTC 3.3V
14 RXIN I - - Crystal IN for RTC oscillator
15 RXOUT O - - Crystal OUT for RTC oscillator
High(3.3V) High(3.3V)
16 MCU_SET3 I MCU setting pin by externail resistance. Default is high
or Low(0V) or Low(0V)
17 MCU_AMUTE O Low(0V) High(3.3V) Muting signal for audio output. High is for muting and Low is muting off.
Power enable is for the HDMI 5V power supply. High is for
18 HDMI_POWER_CTRL O Low(0V) High(3.3V)
HDMI work normal. And low is for HDMI off.
Muting signal for CVBS output. High is for CVBS output is
19 V_MUTE O High(3.3V) Hi-Z(0V)
enabled. And low disable the CVBS output.
Switch singal is to switch MCU receive the singal of the HDMI
20 CEC_RS232_SWITCH O Low(0V) High(3.3V) CEC and RS232. High is for MCU to receive the signal of HDMI
CEC and low is for switch those singal input to MT8530
21 MCU_IIC_SCL I High(3.3V) Hi-Z(0V) I2C Clock signal that comunicate with MT8530. (Slave mode).
22 MCU_IIC_SDA I/O High(3.3V) Hi-Z(0V) I2C Data signal that comunicate with MT8530. (Slave mode).

68
 I/O Port Definition
Pin# Assignment Function Function Description
I/O Normal OFF
High(3.3V)/50Hz High(3.3V)/50Hz
23 AC_DET I Detection signal is for AC power.
or 60Hz pulse or 60Hz pulse
Muting signal is for component video(YUV) output. High is
24 COMP_MUTE O High(3.3V) Hi-Z(0V) for component video output is enabled. And low disable the
component video output.
25 RXD_0 I High(3.3V) High(3.3V) Not use
26 TXD_0 O High(3.3V) High(3.3V) Not use
27 KEY_IN_B I High(3.3V) High(3.3V) A/D key B input signal is from key board.
28 MCU_IR_IN I High(3.3V) High(3.3V) IR signal input. Low is to activate the IR receiving.
29 KEY_IN_A I High(3.3V) High(3.3V) A/D key A input signal is from key board.
High(3.3V) High(3.3V)
30 MCU_SET4 I MCU setting pin by externail resistance. Default is high
or Low(0V) or Low(0V)
31 Port 0.1 GPIO I Hi-Z Hi-Z Not use
32 Standby key I High(3.3V) High(3.3V) Power key signal input terminal. Fall-edge is valid.
33 VSS POWER - - Ground Voltage 0V
34 VDD25 POWER - - Internal Regulator Output 2.5V
35 VDD POWER - - Supply Voltage 3.8V
36 RSTN I High(3.3V) High(3.3V) Reset Low Active
Control signal for Power On LED indication with Green color.
For the blink condition:
1.)Green Led blink at 1sec intervals between power-on and
37 MCU_LED_CTRL_A O High(3.3V) Low(0V) boot. The LED keep the light after the boot finishing.
2.)Green Led blink at 1sec intervals before the system becomes
Standby compeletely when the power key is pressed in
power on mode.
Control signal for the Standby LED indication with red color. The
38 MCU_LED_CTRL_B O Low(0V) High(3.3V) LED is light in standby mode. And turn off the LED in power on
mode.
This control signal is to set the low pass filter bandwidth for
High(3.3V)
39 LPF_HD_ED O Hi-Z(0V) Component output. High is in 720P, 1080i output mode. And low
or Low(0V)
is in 480i/576i, 480P/576P output mode.
40 Port 2.7 GPIO - Hi-Z Hi-Z Not use
41 FAN_CTR O Hi-Z Hi-Z Not use
42 AMX_POWER O Hi-Z Hi-Z Not use
43 Port 3.2 GPIO - Hi-Z Hi-Z Not use
44 Port 3.3 GPIO - Hi-Z Hi-Z Not use

Block Diagram
VSS VDD

POWER
VDD25 PORT0/1/2/3/4
MANAGER 32KB
FLASH MEMORY

RSTN LVD/LVR ADC

FLASH CONTROLLER
PORT0 [7:0]
PCA
RESET

TIMER0/1/2
IOSC PORT1 [7:0]
1-CYCLE
IO MULTIPLEXER

UART-0
8051
CLOCK UART-1
SELECT CPU CORE
PORT2 [7:0]
SPI

CEC ENGINE

PGAs
PORT3 [7:0]
Analog
WDT 2KB SRAM
Comparators

Analog Switches
PORT4 [7:0]
I2C Master/Slave
XOSC RTC INTERRUPT
I2C Slave

IO MULTIPLEXER

69
PT6302 (Display UNIT : U5)

Terminal Function
Pin Name I/O Description Pin No.
SG5 to SG35 1 ~ 31
O Segment driver output pin
SG4 to SG1 64 ~ 61
GR1 to GR16 O Grid driver output pin 32 ~ 47
VEE - Power supply 48
VSS - Ground pin 49
OSCI I Oscillator input pin 50
OSCO O Oscillator output pin 51
Reset input pin
RSTB I 52
When this pin is set to "LOW", all functions are initialized.
Chip select input pin
CSB I When this pin is set to "High" Level, the serial data transfer is 53
disabled.
Shift clock input pin
CLKB I 54
The serial data is shifted at the rising edge of CLKB.
DIN I Serial data input pin 55
VDD - Positive power supply 56
P1 to P2 O General purpose output pin 57 ~ 58
AD2 to AD1 O Segment driver output pin 59 ~ 60

Block Diagram

70
MT8530 (Main UNIT : U100)

Block Diagram

OPU HDMI, CVBS,

Component

Motor USB 2.0

Driver
MT8530 Ethernet

Audio DAC

FLASH DRAM

71
PCM1781 (Main Unit: U802) (TOP VIEW)

FMT 1 16 ZEROA
DEMP0 2 15 VOUTL
DEMP1 3 14 VOUTR
MUTE 4 13 VCOM
SCK 5 12 AGND
DATA 6 11 VCC
BCK 7 10 NC
LRCK 8 9 TEST

Terminal Function

TERMINAL
I/O DESCRIPTION
NAME NO.
AGND 12 – Ground
BCK 7 I Audio data bit clock input (1)
DATA 6 I Audio data digital input (1)
DEMP0 2 I De-emphasis control (1) (2)
DEMP1 3 I De-emphasis control (1) (2)
FMT 1 I Data format select (1) (2)
LRCK 8 I Audio data left and right clock input (1)
MUTE 4 I Soft mute control (1) (2)
NC 10 – No connection
SCK 5 I System clock input (1)
TEST 9 – Test pin for factory use. Must be LOW or open (1) (2)
VCC 11 – Power supply, 5-V
VCOM 13 – Common voltage decoupling
VOUTL 15 O Analog output for L-channel
VOUTR 14 O Analog output for R-channel
ZEROA 16 O Zero flag output for L- and R-channels

(1) Schmitt-trigger input

(2) Pulldown

Block Diagram

BCK
LRCK Audio
Serial Output Amp VOUTL
DATA Port DAC and
Low-Pass Filter

4 /8
Oversampling
Enhanced
Digital
Multilevel
(FMT) Filter VCOM
Delta-Sigma
With
Modulator
MS (DEMP0) Function
Serial Control
Control
MC (DEMP1)
Port Output Amp
DAC and
MD (MUTE) Low-Pass Filter VOUTR

(TEST)
System Clock

SCK System
Clock Zero Detect Power Supply
Manager
VCC

AGND
ZEROL/NA(1)

(ZEROA)
ZEROR/ZEROA(1)

(1) Open-drain output for the PCM1782

NOTE: Signal names in parentheses ( ) are for the PCM1781.

72
SMSC8710 (Main UNIT : U901)

Block Diagram

73
NJM2566AV (Main UNIT : U18)

Block Diagram

74
2. FL DISPLAY
FL TUBE (15-BT-114GNK) (Display UNIT: U3)

75
Personal notes:

76