Bid Number: GEM/2022/B/2487158

Dated: 30-08-2022

Bid Document

Bid Details

Bid End Date/Time 21-09-2022 20:00:00

Bid Opening Date/Time 21-09-2022 20:30:00

Bid Offer Validity (From End Date) 90 (Days)

Ministry/State Name Ministry Of Power

Department Name Sjvn Limited

Organisation Name Sjvn Limited

Office Name Shimla

Total Quantity 2

EPC of Green Hydrogen Pilot Project , Operation and

Item Category
Maintenance of Green Hydrogen Pilot Project

BOQ Title Green Hydrogen Production Plant

MSE Exemption for Years of Experience and

No
Turnover

Startup Exemption for Years of Experience

No
and Turnover

Certificate (Requested in ATC),Compliance of BoQ

specification and supporting document
*In case any bidder is seeking exemption from Experience /
Document required from seller
Turnover Criteria, the supporting documents to prove his
eligibility for exemption must be uploaded for evaluation by
the buyer

Bid to RA enabled No

Primary product category Operation and Maintenance of Green Hydrogen Pilot Project

Time allowed for Technical Clarifications

3 Days
during technical evaluation

Evaluation Method Total value wise evaluation

EMD Detail

Advisory Bank HDFC Bank

EMD Percentage(%) 2.00

EMD Amount 1356003

ePBG Detail

Advisory Bank HDFC Bank

1/6
 ePBG Percentage(%) 3.00

Duration of ePBG required (Months). 44

(a). EMD EXEMPTION: The bidder seeking EMD exemption, must submit the valid supporting document for the
relevant category as per GeM GTC with the bid. Under MSE category, only manufacturers for goods and Service
Providers for Services are eligible for exemption from EMD. Traders are excluded from the purview of this Policy.

(b). EMD & Performance security should be in favour of Beneficiary, wherever it is applicable.

Beneficiary:
HoD(ECD)
Shimla, SJVN Limited, SJVN Limited, Ministry of Power
(Salil Shamshery)

Splitting

Bid splitting not applied.

MII Purchase Preference

MII Purchase Preference Yes

MSE Purchase Preference

MSE Purchase Preference Yes

1. Preference to Make In India products (For bids < 200 Crore):Preference shall be given to Class 1 local supplier
as defined in public procurement (Preference to Make in India), Order 2017 as amended from time to time and its
subsequent Orders/Notifications issued by concerned Nodal Ministry for specific Goods/Products. The minimum
local content to qualify as a Class 1 local supplier is denoted in the bid document. If the bidder wants to avail the
Purchase preference, the bidder must upload a certificate from the OEM regarding the percentage of the local
content and the details of locations at which the local value addition is made along with their bid, failing which
no purchase preference shall be granted. In case the bid value is more than Rs 10 Crore, the declaration relating
to percentage of local content shall be certified by the statutory auditor or cost auditor, if the OEM is a company
and by a practicing cost accountant or a chartered accountant for OEMs other than companies as per the Public
Procurement (preference to Make-in -India) order 2017 dated 04.06.2020. Only Class-I and Class-II Local suppliers
as per MII order dated 4.6.2020 will be eligible to bid. Non - Local suppliers as per MII order dated 04.06.2020 are
not eligible to participate. However, eligible micro and small enterprises will be allowed to participate .In case
Buyer has selected Purchase preference to Micro and Small Enterprises clause in the bid, the same will get
precedence over this clause.
2. Purchase preference to Micro and Small Enterprises (MSEs): Purchase preference will be given to MSEs as
defined in Public Procurement Policy for Micro and Small Enterprises (MSEs) Order, 2012 dated 23.03.2012 issued
by Ministry of Micro, Small and Medium Enterprises and its subsequent Orders/Notifications issued by concerned
Ministry. If the bidder wants to avail the Purchase preference, the bidder must be the manufacturer of the offered
product in case of bid for supply of goods. Traders are excluded from the purview of Public Procurement Policy for
Micro and Small Enterprises. In respect of bid for Services, the bidder must be the Service provider of the offered
Service. Relevant documentary evidence in this regard shall be uploaded along with the bid in respect of the
offered product or service. If L-1 is not an MSE and MSE Seller (s) has/have quoted price within L-1+ 15%
(Selected by Buyer)of margin of purchase preference /price band defined in relevant policy, such Seller shall be
given opportunity to match L-1 price and contract will be awarded for 25%(selected by Buyer) percentage of
total QUANTITY.
3. Estimated Bid Value indicated above is being declared solely for the purpose of guidance on EMD amount and
for determining the Eligibility Criteria related to Turn Over, Past Performance and Project / Past Experience etc.
This has no relevance or bearing on the price to be quoted by the bidders and is also not going to have any

2/6
impact on bid participation. Also this is not going to be used as a criteria in determining reasonableness of
quoted prices which would be determined by the buyer based on its own assessment of reasonableness and
based on competitive prices received in Bid / RA process.

Pre Bid Detail(s)

Pre-Bid Date and Time Pre-Bid Venue

https://teams.microsoft.com/l/meetup-
join/19:meeting_ZmYwNjk5OTQtMjBiMC00NzYxLWI1OTMtZjJjYWFiMmI4NDg4
13-09-2022 11:00:00
@thread.v2/0?context={"Tid":"dadf9410-1403-4b2a-b1b7-
610589371a39","Oid":"bf3cd483-9db2-44fa-a6ae-f64411e3c325"}

EPC Of Green Hydrogen Pilot Project

(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively)

Brand Type Unbranded

Technical Specifications

Specification Document View File

BOQ Detail Document View File

Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Consignees/Reporting Officer and Quantity

Consignee/Reporti
S.No. Address Quantity Delivery Days
ng Officer

172201,NATHPA JHAKRI HYDRO

1 Pankaj Dhiman 1 167
POWER STATION P.O JHAKRI

Operation And Maintenance Of Green Hydrogen Pilot Project

(Minimum 50% and 20% Local Content required for qualifying as Class 1 and Class 2 Local Supplier
respectively)

Brand Type Unbranded

Technical Specifications

Specification Document View File

BOQ Detail Document View File

3/6
Advisory-Please refer attached BOQ document for detailed consignee list and delivery period.

Consignees/Reporting Officer and Quantity

Consignee/Reporti
S.No. Address Quantity Delivery Days
ng Officer

172201,NATHPA JHAKRI HYDRO

1 Pankaj Dhiman 1 1262
POWER STATION P.O JHAKRI

Buyer Added Bid Specific Terms and Conditions

1. Generic

Bidders are advised to check applicable GST on their own before quoting. Buyer will not take any
responsibility in this regards. GST reimbursement will be as per actuals or as per applicable rates
(whichever is lower), subject to the maximum of quoted GST %.

2. Generic

Buyer Organization specific Integrity Pact shall have to be complied by all bidders. Bidders shall have to
upload scanned copy of signed integrity pact as per Buyer organizations policy along with bid. Click here
to view the file

3. Generic

OPTIONAL SITE VISIT:

 1. The Bidder is advised to visit and examine the installation site and its surroundings and obtain for itself
on its own responsibility all information that may be necessary for preparing the Bid. The costs of visiting
the site shall be borne by the Bidder. yes

 2. The Bidder representative shall be allowed entry upon consignee premises for such visits, only upon
the express conditions that the Bidder will release and indemnify the Buyer and Consignee against all
liabilities arising out of such visit including death or injury, loss or damage to property, and any other loss,
damage, costs, and expenses incurred as a result of such visit.

 3. The Bidder shall not be entitled to hold any claim against Buyer for noncompliance due to lack of any
kind of pre-requisite information as it is the sole responsibility of the Bidder to obtain all the necessary
information with regard to site, surrounding, working conditions, weather etc. on its own before
submission of the bid.

4. Generic

Supplier shall ensure that the Invoice is raised in the name of Consignee with GSTIN of Consignee only.

5. Generic

Without prejudice to Buyer’s right to price adjustment by way of discount or any other right or remedy
available to Buyer, Buyer may terminate the Contract or any part thereof by a written notice to the Seller,

4/6
 if:
i) The Seller fails to comply with any material term of the Contract.
ii) The Seller informs Buyer of its inability to deliver the Material(s) or any part thereof within the
stipulated Delivery Period or such inability otherwise becomes apparent.
iii) The Seller fails to deliver the Material(s) or any part thereof within the stipulated Delivery Period
and/or to replace/rectify any rejected or defective Material(s) promptly.
iv) The Seller becomes bankrupt or goes into liquidation.
v) The Seller makes a general assignment for the benefit of creditors.
vi) A receiver is appointed for any substantial property owned by the Seller.
vii) The Seller has misrepresented to Buyer, acting on which misrepresentation Buyer has placed the
Purchase Order on the Seller.

6. Generic

1. The Seller shall not assign the Contract in whole or part without obtaining the prior written consent of
buyer.
2. The Seller shall not sub-contract the Contract in whole or part to any entity without obtaining the prior
written consent of buyer.
3. The Seller shall, notwithstanding the consent and assignment/sub-contract, remain jointly and severally
liable and responsible to buyer together with the assignee/ sub-contractor, for and in respect of the due
performance of the Contract and the Sellers obligations there under.

7. Forms of EMD and PBG

Bidders can also submit the EMD with Account Payee Demand Draft in favour of SJVN Limited payable at
Shimla.
Bidder has to upload scanned copy / proof of the DD along with bid and has to ensure delivery of hardcopy
to the Buyer within 5 days of Bid End date / Bid Opening date.

8. Forms of EMD and PBG

Bidders can also submit the EMD with Fixed Deposit Receipt made out or pledged in the name of A/C
(Name of the Buyer). The bank should certify on it that the deposit can be withdrawn only on the demand
or with the sanction of the pledgee. For release of EMD, the FDR will be released in the favour of the
bidder by the Buyer after making endorsement on the back of the FDR duly signed and stamped along
with covering letter. Bidder has to upload scanned copy/ proof of the FDR along with bid and has to ensure
delivery of hardcopy to the Buyer within 5 days of Bid End date/ Bid Opening date

9. Forms of EMD and PBG

Bidders can also submit the EMD with Banker’s Cheque in favour of SJVN Limited payable at Shimla.
Bidder has to upload scanned copy / proof of the BC along with bid and has to ensure delivery of hardcopy
to the Buyer within 5 days of Bid End date / Bid Opening date.

10. Buyer Added Bid Specific ATC

Buyer uploaded ATC document Click here to view the file .

Disclaimer
The additional terms and conditions have been incorporated by the Buyer after approval of the Competent
Authority in Buyer Organization. Buyer organization is solely responsible for the impact of these clauses on the
bidding process, its outcome, and consequences thereof including any eccentricity/restriction arising in the
bidding process due to these ATCs and due to modification of technical specifications and/or terms and
conditions governing the bid. Any clause incorporated by the Buyer such as demanding Tender Sample,
incorporating any clause against the MSME policy and Preference to make in India Policy, mandating any Brand
names or Foreign Certification, changing the default time period for Acceptance of material or payment timeline
governed by OM of Department of Expenditure shall be null and void and would not be considered part of bid.
Further any reference of conditions published on any external site or reference to external documents/clauses
shall also be null and void. If any seller has any objection/grievance against these additional clauses or
otherwise on any aspect of this bid, they can raise their representation against the same by using the
Representation window provided in the bid details field in Seller dashboard after logging in as a seller within 4

5/6
days of bid publication on GeM. Buyer is duty bound to reply to all such representations and would not be
allowed to open bids if he fails to reply to such representations. Also, GeM does not permit collection of Tender
fee / Auction fee in case of Bids / Forward Auction as the case may be. Any stipulation by the Buyer seeking
payment of Tender Fee / Auction fee through ATC clauses would be treated as null and void.

This Bid is also governed by the General Terms and Conditions

In terms of GeM GTC clause 26 regarding Restrictions on procurement from a bidder of a country which shares a land border with India, any bidder from a country which
shares a land border with India will be eligible to bid in this tender only if the bidder is registered with the Competent Authority. While participating in bid, Bidder has to
undertake compliance of this and any false declaration and non-compliance of this would be a ground for immediate termination of the contract and further legal action
in accordance with the laws.

---Thank You---

6/6