Scribd Logo
Upload

Welcome to Scribd!

  • 150 views

    BS1400 HTB1

    Uploaded by

    Atul Kulkarni
    1. The document describes the material properties of high tensile brass BS 1400 HTB1, which conforms to British and European standards for a copper-zinc alloy containing manganese, aluminum, and iron. 2. It is commonly used for commercial plumbing fittings and water valves due to its high tensile strength. 3. The document provides information on the alloy's chemical composition, fabrication properties, physical properties, melting points, density, electrical and thermal conductivity, coefficient of thermal expansion, modulus of elasticity, and magnetic permeability.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    BS1400 HTB1

    Uploaded by

    Atul Kulkarni
    150 views2 pages
    1. The document describes the material properties of high tensile brass BS 1400 HTB1, which conforms to British and European standards for a copper-zinc alloy containing manganese, aluminum, and iron. 2. It is commonly used for commercial plumbing fittings and water valves due to its high tensile strength. 3. The document provides information on the alloy's chemical composition, fabrication properties, physical properties, melting points, density, electrical and thermal conductivity, coefficient of thermal expansion, modulus of elasticity, and magnetic permeability.

    Original Title

    BS1400 HTB1(3)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. The document describes the material properties of high tensile brass BS 1400 HTB1, which conforms to British and European standards for a copper-zinc alloy containing manganese, aluminum, and iron. 2. It is commonly used for commercial plumbing fittings and water valves due to its high tensile strength. 3. The document provides information on the alloy's chemical composition, fabrication properties, physical properties, melting points, density, electrical and thermal conductivity, coefficient of thermal expansion, modulus of elasticity, and magnetic permeability.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    150 views2 pages

    BS1400 HTB1

    Uploaded by

    Atul Kulkarni
    1. The document describes the material properties of high tensile brass BS 1400 HTB1, which conforms to British and European standards for a copper-zinc alloy containing manganese, aluminum, and iron. 2. It is commonly used for commercial plumbing fittings and water valves due to its high tensile strength. 3. The document provides information on the alloy's chemical composition, fabrication properties, physical properties, melting points, density, electrical and thermal conductivity, coefficient of thermal expansion, modulus of elasticity, and magnetic permeability.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    HIGH TENSILE BRASS BS: 1400 HTB1

    A high tensile strength brass conforming to BS 1400 HTB1


    CuZn35AlFeMn and BS EN 1982-2008 CC765S
    CuZn35Mn2Al1Fe1-C. It is generally used for commercial
    plumbing fittings and other fairly standard water type valves.
    Copper Alloys specializes in producing large-section forgings in
    this alloy.

    C52480 Phosphorus Bronze


    :: Send Enquiry

    Equivalent Specifications:

    Specifications BS EN IS JIS DIN ISO Russian

    Designation HTB1 CC765S - - 2.034 CuZn35Mn2AlFe1-C -

    Chemical Composition:

    Cu Pb Sn Zn Si Ni Fe Al Mn Other
    Min 55 - - - - - 0.7 0.5 0.1 -
    Max Rem. 0.5 1 Rem. 0.1 1.0 2.0 2.5 3.0 0.2

    Fabrication Properties:

    Joining Technique Suitability


    Soldering Fair
    Brazing Fair
    Oxyacetylene Welding Poor
    Gas Shielded Arc Welding Poor
    Coated Metal Arc Welding Poor
    Machinability Rating 26
    Physical Properties:

    Melting Point – Liquidus °F 1616


    Melting Point – Solidus °F 1583
    Density lb/cu in. at 68°F 0.301
    Specific Gravity 8.33
    Electrical Conductivity% IACS at 68°F 22
    Thermal Conductivity Btu/ sq ft/ ft hr/ °F at 68°F 49.6
    Coefficient of Thermal Expansion 68-21210⁻⁶ per °F (68 – 212°F) 11.3
    Specific Heat Capacity Btu/ lb /°F at 68°F 0.09
    Modulus of Elasticity in Tension ksi 15000
    Magnetic Permeability* 1.09

    Sizes Available:

    TUBES 6.35 mm to 110mm


    ROUND WIRES 1 mm to 11mm
    ROUND RODS 1.2 to 250 mm
    HEX RODS Min. 5 mm to Max. 60 mm
    SQUARE RODS Min. 4 mm to Max. 60 mm
    FLATS Min. 4 mm thickness and max width of 120mm
    PROFILES As per customer drawings
    HOLLOW RODS Min Bore Size 20mm and Max OD 130mm

    You might also like