CD SB eng 9.

qxp 6/7/2019 1:14 PM Page 12

Specifications & Consumer information

RECOMMENDED LUBRICANTS AND CAPACITIES

To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality.
The correct lubricants also help promote engine efficiency that results in improved fuel economy.
These lubricants and fluids are recommended for use in your vehicle.
Lubricant Volume Classification
Engine oil *1 *2 ACEA A5/B5
(drain and refill) 1.0 T-GDI 3.6 l(3.8 US qt.)
API SN, ACEA C2 *4
ACEA A5/B5
1.4 T-GDI 4.2 l(4.4 US qt.)
Recommends API SN, ACEA C2 *4
API service SM, ILSAC GF4 or above,
Gasoline Engine ACEA A5/B5 *3
1.4 MPI 3.6 l(3.8 US qt.)
ACEA A5/B5

1.6 MPI 3.6 l(3.8 US qt.) API Latest (ILSAC Latest)

1.6 T-GDI 4.5 l(4.75 US qt.) ACEA A5/B5

Diesel Engine Smart stream D 1.6 4.4 l(4.6 US qt.) ACEA C5 or C2 or C3

9 12
CD SB eng 9.qxp 6/7/2019 1:14 PM Page 13

Specifications & Consumer information

Lubricant Volume Classification

1.0 T-GDI 1.6 ~ 1.7 l

1.4 T-GDI 1.5 ~ 1.6 l

API Service GL-4 SAE 70W
Gasoline Engine 1.4 MPI 1.6 ~ 1.7 l
Manual - HK SYN MTF 70W
transaxle fluid - SPIRAX S6 GHME 70W MTF
1.6 MPI 1.6 ~ 1.7 l
- GS MTF HD 70W
1.6 T-GDI 1.5 ~ 1.6 l

Diesel Engine 1.6L 1.5 ~ 1.6 l

1.4 T-GDI
API Service GL-4 SAE 70W
Gasoline Engine
Dual clutch trans- 1.9 ~ 2.0 l - HK SYN DCTF 70W
1.6 T-GDI
mission fluid (2.0 ~ 2.1 US qt.) - SPIRAX S6 GHME 70W DCTF
- GS DCTF HD 70W
Diesel Engine 1.6 L

MICHANG ATF SP-IV, SK ATF SP-IV,

Automatic transaxle
Gasoline Engine 1.6 MPI 6.7 l(7.1 US qt.) NOCA ATF SP-IV,
fluid
KIA genuine ATF SP-IV

9 13
CD SB eng 9.qxp 6/7/2019 1:14 PM Page 14

Specifications & Consumer information

Lubricant Volume Classification

1.0 T-GDI MT 5.5 l(5.8 US qt.)
MT
1.4 T-GDI 6.1 l(6.4 US qt.)
DCT
Gasoline 1.4 MPI MT 5.5 l(5.8 US qt.)
Engine MT 5.5 l(5.8 US qt.) Mixture of antifreeze and water
Coolant 1.6 MPI (Ethylene-glycol with phosphate based
AT 5.4 l(5.7 US qt.) coolant for cooling device)
MT
1.6 T-GDI 5.8 l(6.1 US qt.)
DCT
Diesel Smart stream MT
7.8 l(8.2 US qt.)
Engine D 1.6 DCT
Brake / clutch fluid Required amount FMVSS116 DOT-3 or DOT-4
ISO22241
Urea solution 12 l(12.7 US qt.)
DIN70070
Fuel 50 l(13.2 US gal.) -

*1 : Refer to the recommended SAE viscosity numbers on the next page.

*2 : Engine oils labeled Energy Conserving Oil are now available. Along with other additional benefits, they contribute to fuel economy by reducing
the amount of fuel necessary to overcome engine friction. Often, these improvements are difficult to measure in everyday driving, but in a year’s
time, they can offer significant cost and energy savings.
*3 : FOR INDIA, MIDDLE EAST, IRAN, LIBIA, ALGERIA, SUDAN, MOROCCO, TUNISIA, EGYPT, CENTRAL&SOUTH AMERICA
*4 : EXCEPT INDIA, MIDDLE EAST, IRAN, LIBIA, ALGERIA, SUDAN, MOROCCO, TUNISIA, EGYPT, CENTRAL&SOUTH AMERICA

9 14
CD SB eng 9.qxp 6/7/2019 1:14 PM Page 15

Specifications & Consumer information

Recommended SAE viscosity Using oils of any viscosity other than those recommended could result in
number engine damage.
When choosing an oil, consider the range of temperature your vehicle will be
CAUTION operated in before the next oil change. Proceed to select the recommended
Always be sure to clean the area oil viscosity from the chart.
around any filler plug, drain ■ Diesel 1.6
plug, or dipstick before check-
ing or draining any lubricant. Temperature Range for SAE Viscosity Numbers
This is especially important in °C -30 -20 -10 0 10 20 30 40
dusty or sandy areas and when Temperature
(°F) -10 0 20 40 60 80 100
the vehicle is used on unpaved
10W-30/40
roads. Cleaning the plug and Diesel
dipstick areas will prevent dirt 5W-30/40
Engine Smartstream D1.6
and grit from entering the 0W-30
Oil
engine and other mechanisms 0W-20
that could be damaged.

Engine oil viscosity (thickness) has

an effect on fuel economy and cold
weather operating (engine start and
engine oil flowability). Lower viscosi-
ty engine oils can provide better fuel
economy and cold weather perform-
ance, however, higher viscosity
engine oils are required for satisfac-
tory lubrication in hot weather.

9 15
CD SB eng 9.qxp 6/7/2019 1:14 PM Page 16

Specifications & Consumer information

■ Kappa 1.0/1.4 T-GDI

Temperature Range for SAE Viscosity Numbers
°C -30 -20 -10 0 10 20 30 40 50
Temperature
(°F) -10 0 20 40 60 80 100 120
For all countries 0W-30, 5W-30

■ Kappa 1.4 MPI

Temperature Range for SAE Viscosity Numbers
°C -30 -20 -10 0 10 20 30 40 50
Temperature
(°F) -10 0 20 40 60 80 100 120
20W-50
Except Europe *1, 15W-40
Middle East *3 10W-30
5W-20 *1, 5W-30

20W-50
For Europe * ,2 15W-40
Middle East *3 10W-30
5W-30 *2, 5W-40

*1 : For better fuel economy, it is recommended to use the engine oil of a viscosity grade SAE
5W-20. However, if the engine oil is not available in your country, select the proper engine
oil using the engine oil viscosity chart.
*2 : For better fuel economy, it is recommended to use the engine oil of a viscosity grade SAE
5W-30. However, if the engine oil is not available in your country, select the proper engine
oil using the engine oil viscosity chart.
*3 : Middle East includes Morocco, Sudan and Egypt. IRAN, INDIA, LIBIA, ALGERIA, TUNISIA

9 16
CD SB eng 9.qxp 6/7/2019 1:14 PM Page 17

Specifications & Consumer information

■ Gasoline 1.6L MPI

Temperature Range for SAE Viscosity Numbers
°C -30 -20 -10 0 10 20 30 40 50
Temperature
(°F) -10 0 20 40 60 80 100 120
For Europe 0W-40, 5W-20*1, 5W-30*3, 5W-40

20W-50
Except 15W-40
Europe &
10W-30
Gasoline Middle East *2
5W-20*1, 5W-30*3
1.6L MPI
20W-50
For 15W-40
Middle East *2 10W-30
5W-30*3, 5W-40

*1 : For better fuel economy, it is recommended to use the engine oil of a viscosity grade SAE
5W-20 (Except Middle East) or 5W-30 (For Middle East). However, if the engine oil is not
available in your country, select the proper engine oil using the engine oil viscosity chart.
*2 : Middle East includes Libya, Algeria, Morocco, Tunisia, Sudan, Egypt and Iran.
*3 : For better fuel economy, it is recommended to use the engine oil of a viscosity grade SAE
5W-30 (ACEA A5/B5).

9 17
CD SB eng 9.qxp 6/7/2019 1:14 PM Page 18

Specifications & Consumer information

■ Gasoline 1.6L T-GDI

Temperature Range for SAE Viscosity Numbers
°C -30 -20 -10 0 10 20 30 40 50
Temperature
(°F) -10 0 20 40 60 80 100 120
20W-50
Gasoline 15W-40
1.6L T-GDI 10W-30
5W-30*1, 5W-40

*1 : For better fuel economy, it is recommended to use the engine oil of a viscosity grade SAE
5W-30 (ACEA A5/B5).

9 18
CD SB eng 9.qxp 6/7/2019 1:14 PM Page 19

Specifications & Consumer information

VEHICLE IDENTIFICATION NUMBER (VIN) VEHICLE CERTIFICATION

■ Type A ■ Type B (if equipped) LABEL (IF EQUIPPED)

OCD088001 OCD088002
The vehicle identification number VIN label OUB081003
(VIN) is the number used in register- The VIN is also on a plate attached The vehicle certification label
ing your car and in all legal matters to the top of the dashboard. The attached on the driver’s (or front pas-
pertaining to its ownership, etc. number on the plate can easily be senger’s) side center pillar gives the
The number is punched on the floor seen through the windshield from vehicle identification number (VIN).
under the passenger seat. To check outside.
the number, remove the cover (1).

9 19