Scribd Logo
Upload

Welcome to Scribd!

  • 131 views

    Pollito en Huevo

    Uploaded by

    ML Diseños
    This document provides assembly instructions for a paper model of a chick inside an egg. It is separated into three sections - the base, the chick and egg model, and the final assembly. There are detailed step-by-step instructions and diagrams for each part.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Pollito en Huevo

    Uploaded by

    ML Diseños
    131 views11 pages
    This document provides assembly instructions for a paper model of a chick inside an egg. It is separated into three sections - the base, the chick and egg model, and the final assembly. There are detailed step-by-step instructions and diagrams for each part.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides assembly instructions for a paper model of a chick inside an egg. It is separated into three sections - the base, the chick and egg model, and the final assembly. There are detailed step-by-step instructions and diagrams for each part.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    131 views11 pages

    Pollito en Huevo

    Uploaded by

    ML Diseños
    This document provides assembly instructions for a paper model of a chick inside an egg. It is separated into three sections - the base, the chick and egg model, and the final assembly. There are detailed step-by-step instructions and diagrams for each part.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 11

    CHICK IN EGG

    EASTER

    VISUAL GUIDE
    CHICK IN EGG

    Important information
    Model dimensions Papers needed
    Dimensions (cm) (inch) Paper color Sheets
    Width 14.9 5.9 White 5
    Height 25 9.8 Yellow 2
    Length 14.2 5.6 Orange 1
    Total 8
    Guide orientation
    Printed paper face: Facing inside

    How to use this guide


    This visual assmebly guide is represented by two columns. In the left column you will see in bold, the current Step
    number, and also in bold part number that you will need from the template in that step. Where needed some additional
    comments will be present.
    In the right column you will have a visual representation where each part goes. Parts added in that step will often be
    colored differently than they are, so you can clearly see which ones are added. Also present is a blue arrow that will point
    “north”, since the view angle of the model will change to better show parts added. This arrow can help you with
    orientation for easier understanding of the picture.

    Model overview
    This model is done in 3 sections. We’ll go section by section.

     Section 1: Base
     Section 2: Chick in Egg
     Assembly

    2
    CHICK IN EGG

    Section 1 – Base
    Parts needed Visual guide

    Step 1

    Base is just one part. (Printed


    face should be up).

    Step 2

    Place the part onto the


    cardboard, draw the lines around
    it and cut the cardboard in the
    same shape.

    Step 3

    Finally, glue it to cardboard.


    Now we’ll create the model and
    glue it to the base in the very last
    step.

    3
    CHICK IN EGG

    Section 2 – Chick in Egg


    Parts needed Visual guide

    Step 1

    We’ll do the whole model upside


    down (from top to bottom). This
    is the easiest way to reach all the
    flaps while assembling.

    Step 2

    4
    CHICK IN EGG
    Step 3

    Step 4

    Step 5

    5
    CHICK IN EGG
    Step 6

    Step 7

    Step 8

    9 (EYES)

    6
    CHICK IN EGG
    Step 9

    10

    Step 10

    11

    Step 11

    12

    7
    CHICK IN EGG
    Step 12

    13

    Step 13

    14

    Step 14

    15

    8
    CHICK IN EGG
    Step 15

    16

    9
    CHICK IN EGG

    Assembly
    Parts needed Visual guide

    Step 1

    Section 1, Section 2

    In the final step, glue the model


    to the base. Use the hole at the
    bottom to easly reach all the
    flaps.

    Step 2

    That’s it you are done!


    Congratulations!

    10
    CHICK IN EGG

    Thank you!
    I would like to thank you for purchasing from PaperPoly. Hope you enjoyed making this model, and hope you’ll come
    back for more.
    I really appriciate your interest in my designs, it means a lot to me.
    I hope that the guide was easy to follow and if you have any questions you can write me where you purchased this
    template or on social media.
    E-Mail: [email protected]
    Website: www.paperpoly.com
    If you want to signup for my newsletter you can do it at my website. I send newsletters once a month (or less) and there
    is always a free template for you as a gift. Sometimes there will be a month long coupon code for your next purchase.
    If you are satisfied with the experience consider leaving a review where you purchased the template from, it really
    means a lot!

    11

    You might also like