Scribd
Upload
1K views1 page

CE3301 FLUID MECHANICS Syllabus

This document outlines the objectives and units of a fluid mechanics course. The objectives are to introduce fluid properties and behavior under static conditions, impart knowledge of fluid dynamics using control volume approaches, and expose students to applications of conservation laws. The 5 units cover fluid properties and statics, basic fluid flow concepts, dimensional analysis and model studies, incompressible viscous flow, and boundary layers. On completing the course, students are expected to demonstrate understanding of fluid properties, apply conservation laws to fluid kinematics and dynamics, perform model studies, analyze pipe flow and losses, and explain boundary layer concepts.

Uploaded by

Baskar Singh G
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

CE3301 FLUID MECHANICS Syllabus

This document outlines the objectives and units of a fluid mechanics course. The objectives are to introduce fluid properties and behavior under static conditions, impart knowledge of fluid dynamics using control volume approaches, and expose students to applications of conservation laws. The 5 units cover fluid properties and statics, basic fluid flow concepts, dimensional analysis and model studies, incompressible viscous flow, and boundary layers. On completing the course, students are expected to demonstrate understanding of fluid properties, apply conservation laws to fluid kinematics and dynamics, perform model studies, analyze pipe flow and losses, and explain boundary layer concepts.

Uploaded by

Baskar Singh G
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CE3301 FLUID MECHANICS LTPC3003

OBJECTIVES:
 To introduce the students about properties and behaviour of the fluids under static conditions and to impart basic
knowledge of the dynamics of fluids through the control volume approach and to expose to the applications of the
conservation laws to a) flow measurements b) flow through pipes (both laminar and turbulent) and c) forces on pipe
bends with an exposure to the significance of boundary layer theory and its applications.

UNIT I FLUIDS PROPERTIES AND FLUID STATICS 10

Scope of fluid mechanics – Definitions of a fluid – Methods of analysis – Continuum hypothesis – System and Control
volume approach – Reynold’s transportation theorem – Fluid properties – Fluid statics – Manometry – Forces on plane
and curved surfaces – Buoyancy and floatation – Stability of floating bodies

UNIT II BASIC CONCEPTS OF FLUID FLOW 10

Kinematics: Classification of flows – Streamline, streak-line and path-lines – Stream function and velocity potentials –
Flow nets;
Dynamics : Application of control volume to continuity, energy and momentum – Euler’s equation of motion along a
stream line – Bernoulli’s equation – Applications to velocity and discharge measurements – Linear momentum
equation – Application to Pipe bends – Moment of momentum equation.

UNIT III DIMENSIONAL ANALYSIS AND MODEL STUDIES 7

Fundamental dimensions – Dimensional homogeneity – Rayleigh’s method and Buckingham Pi theorem –


Dimensionless parameters – Similitude and model studies – Distorted and undistorted models.

UNIT IV INCOMPRESSIBLE VISCOUS FLOW 10

Reynolds experiment – Laminar flow in pipes and between parallel plates – Development of laminar and turbulent
flows in pipes – Darcy-Weisbach equation – Moody diagram – Major and minor losses of flow in pipes – Total energy
line – Hydraulic grade line – Siphon – Pipes in series and parallel – Equivalent pipes.

UNIT V BOUNDARY LAYERS 8

Definition of boundary layers – Laminar and turbulent boundary layers – Displacement, momentum and energy
thickness – Momentum integral equation – Applications – Separation of boundary layer – Drag and Lift forces.

TOTAL: 45 PERIODS
OUTCOMES:
On completion of the course, the student is expected to
CO1 Demonstrate the difference between solid and fluid, its properties and behaviour in static conditions.
CO2 Apply the conservation laws applicable to fluids and its application through fluid kinematics and dynamics.
CO3 Formulate the relationship among the parameters involved in the given fluid phenomenon and to predict the
performance of prototypes by model studies.
CO4 Estimate the losses in pipelines for both laminar and turbulent conditions and analysis of pipes connected in
series and parallel.
CO5 Explain the concept of boundary layer and its application to find the drag force excreted by the fluid on the flat
solid surface.
TEXTBOOKS:
1. Modi P.N and Seth Hydraulics and Fluid Mechanics including Hydraulic Machines Standard Book House New
Delhi. 2015.
2. Streeter, V.L. Wylie, E. B. and Bedford K.W, Fluid Mechanics. (9th Ed.) Tata McGraw Hill, New Delhi, 1998.
REFERENCES:
1. S K Som; Gautam Biswas and S Chakraborty, Introduction to Fluid Mechanics and Fluid Machines, Tata McGraw
Hill Education Pvt. Ltd., 2012.
2. Pani B S, Fluid Mechanics: A Concise Introduction, Prentice Hall of India Private Ltd, 2016.
3. Jain A. K. Fluid Mechanics including Hydraulic Machines, Khanna Publishers, New Delhi, 2014.
4. Narayana Pillai N. Principles of Fluid Mechanics and Fluid Machines, (3rd Ed.) University Press (India) Pvt. Ltd.
2009.

You might also like