0% found this document useful (0 votes)
33 views12 pages

Master FIELD TEST

The document describes field density test results using the sand cone method according to ASTM D1556. Three field density tests were conducted at different locations and layers to determine wet density, water content, and other parameters for quality control purposes.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
33 views12 pages

Master FIELD TEST

The document describes field density test results using the sand cone method according to ASTM D1556. Three field density tests were conducted at different locations and layers to determine wet density, water content, and other parameters for quality control purposes.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 12

Project No : 5094C

PT. PETROSEA Tbk


SUBAN COMPRESSION, ROAD & DRAINAGE PROJECT

Field Density Test


( Sand Cone Method )

Loc. Compression Area

Doc No :

A 23/7/2016 Issued For Client Approval MRF HFA OSA


NO DATE DESCRIPTION PREPAREDCHECKED APPROVED
SUBAN COMPRESSION, ROAD & DRAINAGE
PROJECT
Doc. No 5094C/SBN/FDT/0018
SUMMARY FIELD DENSITY TEST
Date : 23/7/2016 Rev. No 0
(SAND CONE METHOD)
Page 1

Field Density Result


Date of Point g d Sample % g d
Location Layer Coordinate Water gm gd Spec Remarks
Tested No max No max
Content % g/cm3 g/cm3
N= 9719738.815 E=
23/7/2016 1 Compression Area 4 319850.982 13.9 2.063 1.811 1.954 BP 0001 92.69 90 Acceptable

N= 9719747.224 E=
2 Compression Area 4 319805.813 13.38 2.009 1.772 1.954 BP 0001 90.66 90 Acceptable

N= 9719751.127 E=
3 Compression Area 4 319779.225 12.61 2.017 1.791 1.954 BP 0001 91.56 90 Acceptable

PT.TIGENCO PT.PETROSEA CONOCOPHILLIPS INDONESIA

Print name Date Print name Date Print name Date


PT. ESKAPINDO MATRA
consulting engineers

New Airport Development


Earthwork and River Diversion
DYNAMIC CONE PENETROMETER TEST
(ASTM D 6951)

Doc. No : P104-LMAK-QC-DCPT-00
Rev. :

STA : Date :
Point of Test : Koordinat :
Location : Zone / Grid Hammer Weight : 8 kg
Type of Layer :

A B C D E F G H

Penetration
Number of Cummulative Penetration per Hammer DCP Index Moisture Content if
Between Reading CBR Correlated %
Blows Penetration (mm) Blow (mm) Factor mm/blow any %
(mm)

0.000 - - - -

1 10 10 10.0 1 10.00 22.2

1 20 10 10.0 1 10.00 22.2

1 30 10 10.0 1 10.00 22.2

1 40 10 10.0 1 10.00 22.2

1 50 10 10.0 1 10.00 22.2

1 60 10 10.0 1 10.00 22.2

1 70 10 10.0 1 10.00 22.2


1 80 10 10.0 1 10.00 22.2

1 90 10 10.0 1 10.00 22.2

1 100 10 10.0 1 10.00 22.2


1 110 10 10.0 1 10.00 22.2

1 120 10 10.0 1 10.00 22.2


1 130 10 10.0 1 10.00 22.2

1 140 10 10.0 1 10.00 22.2

1 150 10 10.0 1 10.00 22.2


1 160 10 10.0 1 10.00 22.2

1 170 10 10.0 1 10.00 22.2

AVERAGE 22.15 22.15

N B : S K ET C H O F T ES T P O IN T

Notes

A Number of blow per reading H if tested


B Cummulative penetration after each reading
C Difference between cumulative penetration each reading
D C/A
E 1 for 8 kg hammer, 2 for 4 kg hammer
F DxE
G
for all soil : CBR = 292/DCP1.12, for CL <10%CBR CBR = 2/(0.017019*DCP)2, for CH soil CBR = 2/0.002871*DCP

Prepared By : Witness/Approved By :
LMA Konsorsium PT. Eskapindo Matra

Date : Date :
PT. ESKAPINDO MATRA New Airport Development - Earthwork and
consulting engineers
River Diversion

FIELD DENSITY TEST (SANDCONE


METHOD) ASTM D1556
Doc. No : P104-LMAK-QC-FDT-00
STA : Borrow area : BPT. /
Location : Zona / Grid Date :

Number Of Test

Layer

Point of Test

Remarks

Coordinate

1 Weight of bottle + sand full gram 7554 7235.4

2 Weight of bottle + sand left gram 3693 3522.1

3 Weight of sand used (1 - 2 ) gram 3861 3713.3

4 Weight of sand in funel gram 1454.2 1454.2

5 Weight of sand fill (3 - 4) gram 2406.8 2259.1

6 Volume Weight of sand, (g sand) g/cm3 1.369 1.369

7 Volume of hole ( 5/6 ) cm3 1758.07 1650.18

8 Weight of container + wet soil gram 4003.3 3714.8

9 Weight of container gram 10 10

10 Weight of wet soil (8 - 9) gram 3993.3 3704.8

11 Wet Density ( g m ) g/cm3 2.271 2.245

12 Water content Dial reading (1/2 X) 7 7

13 by "SPEEDY" Factor corection dial reading 1.2 1.2

14 Moisture Tester Water Content ( w ) % 8.68 8.68

15 Dry Density ( gd ) 11/("1"+(14/"100") g/cm3 2.090 2.066

16 Laboratory w opt. % 14.45 14.45

17 Tested gd max. g/cm3 1.885 1.885


18 FIELD DENSITY (15/17) % 110.88 109.59

NB : SKETCH OF TEST POINT

Notes

Prepared By : Reviewed by, Witness/Approved By :


PT. Tigenco Graha Persada LMA Konsorsium PT. Eskapindo Matra

Print Name Date Print Name Date Print Name Date


PT. ESKAPINDO MATRA New Airport Development - Earthwork and
consulting engineers
River Diversion
FIELD DENSITY TEST
(SANDCONE METHOD) ASTM
D1556
Doc. No : P104-LMAK-QC-FDT-00
Rev :
STA : Borrow area :

Location : Zona / Grid

Date :

Layer

Point of Test

Remarks

Coordinate

1 Weight of bottle + sand full gram

2 Weight of bottle + sand left gram

3 Weight of sand used (1 - 2 ) gram 0 0

4 Weight of sand in funel gram

5 Weight of sand fill (3 - 4) gram 0 0

6 Volume Weight of sand, (g sand) g/cm3

7 Volume of hole ( 5/6 ) cm3 #DIV/0! #DIV/0!

8 Weight of container + wet soil gram

9 Weight of container gram

10 Weight of wet soil (8 - 9) gram 0 0

11 Wet Density ( g m ) g/cm3 #DIV/0! #DIV/0!

12 Water content Dial reading (1/2 X)

13 by "SPEEDY" Factor corection dial reading 0.0 0.0

14 Moisture Tester Water Content ( w ) % 0.00 0.00

15 Dry Density ( gd ) 11/("1"+(14/"100") g/cm3


0.000 0.000

16 % Retained no. 4 %

17 MDD Correction g/cm3 #DIV/0! #DIV/0!

18 Laboratory w opt. %

19 Tested gd max. g/cm3


20 FIELD DENSITY (15/17) % #DIV/0! #DIV/0!

NB : SKETCH OF TEST POINT

Prepared By : Reviewed by, Witness/Approved By :


PT. Tigenco Graha Persada LMA Konsorsium PT. Eskapindo Matra

Print Namae Date Print Namae Date Print Name Date


PT. ESKAPINDO MATRA
co nsulti ng engi neers

NEW AIRPORT DEVELOPMENT EARTHWORK & RIVER DIVERSION

FIELD CBR TEST


ASTM D 1883
Doc. No : P104-LMAK-QC-FCBR-00
Rev :

STA : Date :
LOCATION : Zona / Grid Tested by :
Coordinate : Proving Ring :
Layer : Capacity : lbf
Description :

Time Peneteration Dial Load


Reading 12.00
min mm lbs
0 0.00
1/4 0.32
10.00
1/2 0.64
1 1.27
1 1/2 1.91 8.00

2 2.54
Load (lbs)

3 3.81
6.00
4 5.08
6 7.62
8 10.16
4.00
10 12.7

2.00
CBR Results

Peneteration Load Standard CBR


Load Minimum
Spec. 0.00
mm lbs lbs % 0.00 3.00 6.00 9.00 12.00
2.54 3000
Peneteration (mm)
5.08 4500

Remark : No. Seri of Equipment


Calibration rate lbs/div
PT. ESKAPINDO MATRA
consulting engineers
New Airport Development - Earthwork and River Diversion

FIELD DENSITY TEST (Water Replacement Method) ASTM


D5030 Procedure B
Doc. No : P104-LMAK-QC-WRM-00
Rev :
Date : BPT : Omc :
Location : Elv : Spgr :
Thickness : cm
Point of Test : Depth : cm
Number of Test : Coordinate :
Layer :
Wt Container : kg Speedy : - -
Wt of Sack : kg ( Water Content at Field) - -
-
Average :

NO. Weight of Water Above Point Test Weight of Water in Hole Weight of Control Fraksion Weight of Oversize

1 kg kg kg kg

2 kg kg kg kg

3 kg kg kg kg

4 kg kg kg kg
5 kg kg kg kg

6 kg kg kg kg

7 kg kg kg kg

8 kg kg kg kg

9 kg kg kg kg

10 kg kg kg kg
11 kg kg kg kg

12 kg kg kg kg

13 kg kg kg kg

14 kg kg kg kg

15 kg kg kg kg

16 kg kg kg kg

17 kg kg kg kg

18 kg kg kg kg

19 kg kg kg kg

20 kg kg kg kg

Bruto kg kg kg kg

Netto kg kg kg kg

Water Content Laboratory


Volume Water : m3 Control Fraction Oversize
Volume Oversize : m 3
No Container
Volume Control Fraksi : m3 Wet Container + Wet Sample
Wet Density at Field : t/m 3
Wet Container + Dry Sample
Dry Density at Field : t/m 3 Wt of Container

Prepared By : Reviewed by, Witness/Approved By :


PT. Tigenco Graha Persada LMA Konsorsium PT. Eskapindo Matra

Print Nam e Date Print Nam e Date Print Name Date


PT. ESKAPINDO MATRA NEW AIRPORT DEVELOPMENT
consulting engineers EARTHWORK & RIVER DIVERSION
DOUBLE RING INFILTROMETER TEST
ASTM D 3385 - 18
Doc. No. : P104-LMAK-QC-DRI-00
REV :
PROJECT NO : P 104 TESTED BY :
WORK ITEM : DATE :
TYPE OF SAMPLE : WEATHER :
INNER RING DIAMETER 300 mm INNER RING AREA 706.86 cm2 PENETRATION TO SOIL 16.00 cm
OUTER RING DIAMETER 600 mm ANNULAR AREA 2120.58 cm2 LIQUID LEVEL MAINTENANCE BY MANUAL CUMULATIVE
INNER RING RADING ANNULAR SPACE INFILTRATION (i) INFILTRATION difference
TEMPERAT INFILITRATI REGRESSION
TIME INITIAL FINAL INITIAL FINAL URE CUMULATIV ON RATE (I
TIME START ELAPSED TIME Volume INTERVAL (t))
INTERVAL HEIGHT HEIGHT HEIGHT HEIGHT E
MINUTE MINUTE cm cm cm3 cm cm C cm cm cm/minute cm cm
10:43 5 5 35.0 34.2 565.49 6 7.5 28 0.8 0.8 0.160
10:48 10 5 34.2 33.6 424.12 7.5 8.5 28 0.6 1.4 0.120

10:53 15 5 33.6 33 424.12 8.5 9 28 0.6 2 0.120


10:58 20 5 33 32.3 494.80 9 10 28 0.7 2.7 0.140
11:03 25 5 32.3 31.7 424.12 10 11.2 28 0.6 3.3 0.120

11:08 30 5 31 30.5 353.43 11.2 11.9 28 0.5 3.8 0.100


11:13 35 5 30.5 30 353.43 11.9 12.5 28 0.5 4.3 0.100
New Airport Development - Earthwork and River PT. ESKAPINDO MATRA
Diversion consulting engineers

Field Density Test by Sandcone Method (ASTM


D1556) with Correction of Unit Weight and Water
Content for Total Sample (ASTM D4718)

Doc. No : P104-LMAK-QC-FDT-00
Work Item : Trial Compaction LTP MSEWall + Geogrid (10 Passing) Borrow area : LTP 100 % Crusher MGM
Lokasi : Zona B Grid G-13 ST 2 Tanggal Test 6-Aug-21
Layer 1 1 1
Titik Test 1 2 3
Keterangan
Koordinat 0604997, 9142400 0605000, 9142400 0605006, 9142404
1 Berat Botol + Pasir Penuh g 7135.3 7024.4 6937.6
2 Berat Botol + Pasir Tersisa g 2235.4 2204.8 2783.7
3 Berat Pasir yang digunakan = (1 - 2 ) g 4899.9 4819.6 4153.9
4 Berat Pasir di corong (attached) g 1640.1 1640.1 1640.1
5 Berat pasir dalam lubang = (3 - 4) g 3259.8 3179.5 2513.8
6 Berat Volume Pasir, (g sand, attached) g/cm3 1.398 1.398 1.398
7 Volume lubang = ( 5/6 ) cm3 2331.76 2274.32 1798.14
8 Berat kontainer + tanah basah g 5066 4957.9 3940.6
9 Berat Kontainer g 10 10 10
10 Berat tanah basah dalam lubang = (8 - 9) g 5056 4947.9 3930.6
11 Berat isi basah ( g m ) (10/7) g/cm 3
2.168 2.176 2.186
12 Berat Basah Lolos 3/4" (M MF) g 2919.0 2919.6 2230.2
13 Berat Basah Tertahan 3/4" (M Mc) g 2137.0 2028.3 1700.4
14 Pembacaan Jarum div 6 6.2 7
Kadar Air Lolos
15 3/4" by Speedy Faktor koreksi alat (attached) 1.567 1.6 1.564
(wf)
16 Kadar Air =(14x15) % 9.40 9.72 10.95
17 Berat Tanah basah + Cawan (a) g 515.40 541.31 540.52 570.35 550.45 531.87
18 Berat Tanah Kering + Cawan (b) g 497.10 523.49 517.99 549.75 534.98 514.47
Kadar Air
19 Tertahan 3/4" by Berat cawan kosong (c) g 31.42 31.15 31.40 32.51 36.52 35.55
Oven (wc)
20 Kadar Air % 3.93 3.62 4.63 3.98 3.10 3.6
21 Kadar Air Rata - rata % 3.77 4.31 3.37
22 Bulk Specific Gravity (Gm) 2.642 2.642 2.642
23 Berat Lolos 3/4" kering (MDF) = 𝑀_𝑀/(1+𝑤) g 2668.1 2661.1 2010.1
24 Berat Tertahan 3/4" kering (MDC) = 𝑀_𝑀/(1+𝑤) g 2059.3 1944.6 1645.0
25 Persentase Berat Lolos 3/4" kering (P F=100𝑀_𝐷𝐹/(𝑀_𝐷𝐹+𝑀_𝐷𝐶)
) % 56.44 57.78 54.99
26 Persentase Berat Tertahan 3/4" kering (P C) =100𝑀_𝐷𝐶/(𝑀_𝐷𝐹+𝑀_𝐷𝐶) % 43.56 42.22 45.01
27 Koreksi kadar air total material (W t) =(𝑤_𝐹 𝑃_𝐹+𝑤_𝐹 % 6.95 7.43 7.54
𝑃_𝐶)
28 Koreksi berat isi kering dari total material (ꙋDT) 𝐺_𝑀 𝛾_𝑤/(𝛾_𝐷𝐹 𝑃_𝐶+𝐺_𝑀 𝛾_𝑤 𝑃_𝐹)
=100𝛾_𝐷𝐹 2.040 2.029 2.052
29 Berat isi kering lap. ( gd ) = (23+24)/7 g/cm 3
2.027 2.025 2.033
30 Test w optimum % 6.22 6.22 6.22
Laboratorium
31 (attached) gd maksimum g/cm 3
1.735 1.735 1.735
32 Persentase Kepadatan Lapangan =(29/28)*100 % 99.38 99.80 99.06

Prepared by, Reviewed by, Witness/Approved by,


PT Tigenco Graha Persada LMA Konsorsium PT.ESKAPINDO MATRA

Print name Date Print name Date Print name Date


PT. ESKAPINDO MATRA New Airport Development - Earthwork and
consulting engineers
River Diversion
FIELD DENSITY TEST
(Water Replacement Method)
ASTM D5030
Doc. No : P104-LMAK-QC-WRM-00
Rev :
STA : Borrow area :

Location :

Date :

Layer

Point of Test

Remarks

Coordinate

1 Weight of water before fill testpit + Template space

2 Weight of water After fill testpit + Template space

3 Weight of water to fill testpit + Template space (1-2) gram #REF! #REF!

4 Weight of water to fill Template space gram

5 Unit Weight of water, (g water) g/cm3

6 Volume of hole ( (3-4)/5 ) cm3 #REF! #REF!

7 Weight of container + wet Sample gram

8 Weight of container gram

9 Weight of wet Sample (7-9) gram 0 0

10 Wet Density ( g b ) (9/6) g/cm3 #REF! #REF!

11 Water content Dial reading

12 by "SPEEDY" Factor corection dial reading 0.0 0.0

13 Moisture Tester Water Content ( w ) (11*12) % 0.00 0.00

14 Dry Density ( gd ) 10/("1"+(13/"100") g/cm3 0.000 0.000

15 Laboratory w opt. %

16 Tested gd max. g/cm3

17 FIELD DENSITY ((14/16)*100) % #REF! #REF!

Nb:

Prepared By : Reviewed by, Witness/Approved By :


PT. Tigenco Graha Persada LMA Konsorsium PT. Eskapindo Matra

Print Name Date Print Name Date Print Name Date


LAMPUNUT ROAD, BRIDGE AND
DAY / NIGHT SHIFT EARTHWORKS CONSTRUCTION
PROJECT PT. MARUWAI COAL
Doc. No C0026C-Q-FDT-40-
FIELD DENSITY TEST
Date : Rev.
(SANDCONE METHOD)
Page
Project No : C0026C

Client : PT. MARUWAI COAL

Location of Test :
Type of Layer

Point No

Remarks

Elevation

Coordinate

1 Weight of bottle + sand full gram

2 Weight of bottle + sand left gram

3 Weight of sand used (1 - 2 ) gram 0 0

4 Weight of sand in funel gram

5 Weight of sand fill (3 - 4) gram 0 0

6 Volume Weight of sand, (g sand) g/cm3

7 Volume of hole ( 5/6 ) cm3 #DIV/0! #DIV/0!

8 Weight of container + wet soil gram

9 Weight of container gram

10 Weight of wet soil (8 - 9) gram 0 0

11 Wet Density ( g m ) g/cm3 #DIV/0! #DIV/0!

12 Water content Dial reading (1/2 X)

13 by "SPEEDY" Factor corection dial reading 0.0 0.0

14 Moisture Tester Water Content ( w ) % 0.00 0.00

15 Dry Density ( gd ) 11/("1"+(14/"100") g/cm3 #DIV/0! #DIV/0!

16 % Retained #4

17 MDD Corection

18 Laboratory w opt. %

19 Tested gd max. g/cm3

20 FIELD DENSITY (15/17) % #DIV/0! #DIV/0!

NB : SKETCH OF TEST POINT


LAMPUNUT BRIDGE AND EARTHWORKS
CONSTRUCTION PROJECT
PT. MARUWAI COAL

FIELD CBR TEST


(ASTM D 4429)

Date : PROVING RING : lbf


Instrument Details : Field CBR Calibration Factor : 10.743 lbf/div
Layer :
Location :

1200

PENETRATION DEFORMATION 1100

Time PENT. DIAL 1000


LOAD
min mm READING
900
0 0.00 0 0
800
1/4 0.32 10 107.43
1/2 0.64 25 268.575 700

Load
1 1.27 32 343.776
600
1 1/2 1.91 45 483.435
2 2.54 65 698.295 500

3 3.81 78 837.954
400
4 5.08 95 1020.585
6 7.62 102 1095.786 300

8 10.16 105 1128.015


200
10 19.1
100

0
0 5 10 15 20
Penetration mm

READING
READING 0.1" 0.2"

LOAD 698.30 1020.59

C B R VALUE
CBR 0.1" 0.2"
698.30 1,020.59
% x 100 % x 100 %
3 x 1000 3 x 1500
23.28 % 22.68 %

NB :
SKETCH OF TEST POINT

Comments :

You might also like