19/10/2017 A Hybrid Approach to Energy Storage

http://www.electronicdesign.com/print/74472 1/17
19/10/2017 A Hybrid Approach to Energy Storage

http://www.electronicdesign.com/print/74472 2/17
19/10/2017 A Hybrid Approach to Energy Storage

This hybrid battery-supercapacitor energy storage system was deployed

at a distribution substation in Gaston County, N.C. (Courtesy of Duke
Energy)

TECHNOLOGIES > POWER

A Hybrid Approach to Energy Storage

Although it is common to nd supercapacitors in many power-electronics
devices, hybrid energy storage technology could increase the commercial
adoption of supercapacitors in grid-scale solutions.

Maria Guerra 1 | Oct 16, 2017

Today, supercapacitors are found in many electronic
applications. In automotive applications alone, they
http://www.electronicdesign.com/print/74472 3/17
19/10/2017 A Hybrid Approach to Energy Storage

are used in startup systems, energy recovery solutions,

and fast charge-discharge systems, to name a few.
Supercapacitors can charge/discharge quickly without
losing energy storage capacity over time. They also
have very high power density. In contrast, batteries
can store larger amounts of energy but they have a
defined cycle life. A combination of batteries and
supercapacitors results in a hybrid energy storage
system that could help meet the needs of myriad
renewable energy applications.

Supercapacitors can assist in delivering peak power

while improving the performance of batteries in
energy storage systems. Many supercapacitor
manufacturers, utility companies, and researchers are
developing hybrid capacitor-battery energy storage
http://www.electronicdesign.com/print/74472 4/17
19/10/2017 A Hybrid Approach to Energy Storage

systems for future projects. Some are already using

them in case studies and pilot projects, such as the one
built by Duke Energy at its Rankin Substation in
Gaston County, N.C.

Duke Energy partnered with Aquion Energy , Maxwell

Technologies , and others to build a hybrid energy
storage system (HESS) project. The hybrid system
uses Maxwell’s UCAPs to help manage solar
smoothing events in real-time—particularly when the
solar power on the grid fluctuates due to cloud cover
or other weather circumstances. The Aquion batteries
are used to shift solar load to a time that better
benefits the utility. The hybrid energy storage system
integrates patented energy management algorithms.
http://www.electronicdesign.com/print/74472 5/17
19/10/2017 A Hybrid Approach to Energy Storage

The Maxwell UCAPs used in this program discharge

and recharge power in a subsecond-to-minutes
timeframe. They also boast long operational life in a
wide operating temperature window. This is ideal for
stabilizing short-term PV power output fluctuation in
large-scale deployments, ensuring reliable access to
solar power on the grid. In addition, a 100-kilowatt/
300-Kwh battery uses a unique Aqueous Hybrid Ion
chemistry (including a saltwater electrolyte and
synthetic cotton separator). These materials should
result in lower costs, while the water-based chemistry
will provide a non-toxic and non-combustible product
that is safe to handle and environmentally friendly.

Other companies such as Hitachi also have been

working on the development of hybrid battery energy
http://www.electronicdesign.com/print/74472 6/17
19/10/2017 A Hybrid Approach to Energy Storage

storage systems. In one of Hitachi’s case studies, a

hybrid battery energy storage system was developed
that combines lead-acid batteries and lithium-ion
capacitors. For the development of hybrid battery
energy storage systems, Hitachi is aiming to cover the
same range of needs as variable-speed pumped-
storage hydroelectric plants. For this purpose, the
company co-developed a 1.5 MW hybrid battery
energy storage system with Shin-Kobe Electric
Machinery Co. Ltd. (now Hitachi Chemical Company
Ltd.), as part of a project subsided by The New Energy
and Industrial Technology Development Organization
(NEDO).

http://www.electronicdesign.com/print/74472 7/17
19/10/2017 A Hybrid Approach to Energy Storage

Lithium-ion capacitors are effective for addressing

short-cycle frequency fluctuations. (Courtesy of
http://www.electronicdesign.com/print/74472 8/17
19/10/2017 A Hybrid Approach to Energy Storage

Hitachi)

The demonstration project on Izu Oshima Island in

Japan began in 2015. It has entered a new stage as a
joint research project with TEPCO Power Grid Inc .
The companies have been evaluating the efficiency of
the monitoring control system and its effects on the
operation of existing power plants. Hitachi is aiming
to commercialize the system in 2018 to help stabilize
the supply of power for island regions.

Battery Pack
http://www.electronicdesign.com/print/74472 9/17
19/10/2017 A Hybrid Approach to Energy Storage

Another approach to hybrid energy storage can be

seen in the hybrid battery pack system called
UltraBattery . It was developed by CSIRO in
Australia, built by the Furukawa Battery Company of
Japan, and tested in the UK through the U.S.-based
Advanced Lead-Acid Battery Consortium. The battery
is a hybrid, long-life, lead-acid energy storage device.
It combines supercapacitor technology with the
energy storage potential of a lead-acid battery
technology in a hybrid device with a single common
electrolyte.

http://www.electronicdesign.com/print/74472 10/17
19/10/2017 A Hybrid Approach to Energy Storage

This hybrid battery pack system combines the

advantages of two energy storage technologies in a
http://www.electronicdesign.com/print/74472 11/17
19/10/2017 A Hybrid Approach to Energy Storage

single cell. (Courtesy of UltraBattery)

The specialized carbon in the ultracapacitor layer

creates a strong Hermholtz layer (the driving structure
of electric double-layer capacitance). With a highly
conductive lattice of an extremely large surface area, it
improves access to reaction sites in the battery’s active
material. The battery achieves a typical dc-dc
efficiency of 93–95% when performing variability
management applications, such as grid regulation
services or renewable ramp rate smoothing at 1C peak
power in a Partial State of Charge (PSoC) regime. The
high dc-dc efficiency translates to lower dc-dc energy
http://www.electronicdesign.com/print/74472 12/17
19/10/2017 A Hybrid Approach to Energy Storage

losses. Conventional VRLA batteries operating at 80%

to 100% SoC lose about five times more energy to heat
and electrolysis than this hybrid battery.

http://www.electronicdesign.com/print/74472 13/17
19/10/2017 A Hybrid Approach to Energy Storage

When the hybrid battery loses less energy during

PSoC operation, more energy is available to service
the load. (Courtesy of UltraBattery)

The UltraBattery operates in a Partial State of Charge

(PSoC). The integrated supercapacitor inhibits the
sulphation process (normal in lead-acid battery
operation), allowing the battery to operate with high
efficiency in a PSoC. The UltraBattery technology has
been used in several Megawatts-scale projects in
Australia and the United States providing the
following: grid ancillary services; smoothing the
intermittent signal of solar and wind energy; energy
http://www.electronicdesign.com/print/74472 14/17
19/10/2017 A Hybrid Approach to Energy Storage

shifting (storing energy for later use); and diesel

efficiency optimization on standalone power systems.

According to Navigant Research , global installed

HESS power capacity is expected to grow from 78.6
MW in 2017 to 2.1 GW in 2026. The growth of interest
in stationary energy storage solutions should help to
boost the development of hybrid energy storage
solutions. Grid-scale hybrid solutions in particular
could lower cost, improve system efficiency, and
increase system lifetime.

http://www.electronicdesign.com/print/74472 15/17
19/10/2017 A Hybrid Approach to Energy Storage

Source URL: http://www.electronicdesign.com/power/hybrid-

approach-energy-storage

http://www.electronicdesign.com/print/74472 16/17
19/10/2017 A Hybrid Approach to Energy Storage

http://www.electronicdesign.com/print/74472 17/17