Catalog 3800 Quick Coupling Products

FOR MOST UPDATED
Quick Coupling Products

CATALOG SCAN WITH
CAMERA
Quick Couplings, Swivels, Valves,

Diagnostic Sensors and Equipment
Catalog 3800 USA | November 2022
PDF Update: June16, 2023
Quick Coupling Division Locations
Minneapolis, MN Grantsburg, WI
Chetek, WI Union City, PA
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELAT-
ED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
• This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors
provide product or system options for further investigation by users having technical expertise.
• The user, through its own analysis and testing, is solely responsible for making the final selection of the system and
components and assuring that all performance, endurance, maintenance, safety and warning requirements of the
application are met. The user must analyze all aspects of the application, follow applicable industry standards, and
follow the information concerning the product in the current product catalog and in any other materials provided from
Parker or its subsidiaries or authorized distributors.
• To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based
upon data or specifications provided by the user, the user is responsible for determining that such data and specifica-
tions are suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.
Offer of Sale
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its
authorized distributors. This offer and its acceptance are governed by the provisions stated in the “Offer of Sale.”
© 2023 Parker Hannifin Corporation, All Rights Reserved.

Table of Contents
Pneumatic Quick Couplings Hydraulic Quick Couplings
Introduction.......................................................... A-1 Introduction...................................................................B-1
Coupling Selection & Ordering Guide.................. A-3 Coupling Selection & Ordering Guide................. B-4, 5, 98
Interchange Match-up Chart............................. ..A-5 General Purpose Couplings
General Purpose Couplings 60 Series....................................................................B-6
Couplers.................................................................B-8
Industrial Interchange Nipples.............................. A-6
20 Series ............................................................ A-9 Nipples...................................................................B-9
30 Series............................................................A-12 60 Series Steam........................................................B-12
Rectus 21, 23, 30 Series......................................A-15 Couplers...............................................................B-12
(formerly HF Series) Nipples.................................................................B-12
6600 Series.............................................................. B-13
Tru-Flate Design, Automotive Interchange
Couplers............................................................... B-14
10 Series............................................................A-18
Nipples................................................................. B-14
ARO 210 Interchange H & PH Series...........................................................B-16
50 Series........................................................... A-22 H Couplers............................................................B-19
Universal Coupler (accepts Industrial Interchange, H Nipples..............................................................B-22
Tru-Flate, and 50 Series Nipples) PH Couplers.........................................................B-21
UC Series.......................................................... A-25 PH Nipples............................................................B-25
Lincoln “Long Stem” Interchange EA Series..................................................................B-26
70 Series........................................................... A-26 Couplers...............................................................B-28
Nipples.................................................................B-29
European High Flow Interface
SM Series.................................................................B-30
Rectus 25 Series............................................... A-28
(formerly RF Series) Couplers............................................................... B-31
Nipples................................................................. B-31
Schrader Twist-Lock Interchange HP Series.................................................................B-33
TL Series............................................................A-31 Couplers...............................................................B-34
Snap-tite Design Nipples.................................................................B-34
IH Series............................................................A-34 4000 Series..............................................................B-35
Couplers...............................................................B-36
Nipples.................................................................B-36
Special Purpose Couplings
4200 Series..............................................................B-38
Tool-Mate Series (Non-Marring) Couplers...............................................................B-39
Rectus 25 and Industrial Interchange Styles.........A-36 Nipples.................................................................B-39
Tool-Mate Series (Non-Marring, Exhaust) Non-Spill Couplings
Rectus 25 and Industrial Interchange Styles.........A-38 NS Series.................................................................B-40
E-z-mate Series (Exhaust) Couplers............................................................... B-41
Industrial Interchange.........................................A-40 Nipples................................................................. B-41
NSS Series...............................................................B-42
GF Series Couplers...............................................................B-43
Natural & Propane Gas........................................A-42 Nipples.................................................................B-44
* UC Series is a replacement for the HA Series.
Parker Hannifin Corporation

Quick Coupling Division
Minneapolis, MN
www.parker.com/quickcouplings
Table of Contents
FF/FC Series.............................................................B-46 1163 Series................................................................B-88
Couplers...............................................................B-47 Couplers...........................................................B-88
Nipples.................................................................B-47 Nipples.............................................................B-88
FC Nipples............................................................B-49 HO Series.............................................................B-89
FEM/FEC Series..................................................... B-50 Couplers...........................................................B-89
Couplers............................................................ B-51 Nipples.............................................................B-89
Nipples.............................................................. B-52 Mold Coolant Line Couplings
FEC Nipples....................................................... B-53
Moldmate Series...................................................B-90
FH Series............................................................... B-54
Couplers...........................................................B-91
Couplers............................................................ B-55
Sub Assemblies & Replacement Parts.................B-92
Nipples.............................................................. B-55
Nipples.............................................................B-94
FS Series................................................................ B-56
Couplers............................................................ B-57 Miniature
Nipples.............................................................. B-57 DM Series.............................................................B-96
Couplers...........................................................B-97
Connect Under Pressure Couplings Nipples.............................................................B-97
59 Series..............................................................B-59 SensoControl Diagnostic and Industrial Catalogs.. B-99
Couplers............................................................. B-60 Diagnostic Test Port Couplings.............................. B-99
Nipples............................................................... B-60 Test Port Couplings...........................................B-100
FET Series............................................................B-61 PD Series............................................................B-100
Couplers............................................................. B-62 Dust Cap.........................................................B-100
Nipples............................................................... B-63 Couplers......................................................... B-101
6100 Series...........................................................B-65 Nipples........................................................... B-101
Couplers...........................................................B-66
Nipples.............................................................B-67
PDP Series..........................................................B-104
Dust Cap.........................................................B-104
8200 Series...........................................................B-68
Couplers.........................................................B-105
Couplers...........................................................B-69
Nipples.............................................................B-69 Nipples...........................................................B-105
9200 Series...........................................................B-70 EMA3 Series.......................................................B-106
Couplers...........................................................B-71 Nipples...........................................................B-107
Nipples.............................................................B-71 Gauge Adapters & Union..................................B-107
5000 Series...........................................................B-72 Transducer Adapters........................................B-108
Couplers...........................................................B-73 Flexible Hose...................................................B-108
Nipples.............................................................B-73 PDFS Series - Fluid Sampling...............................B-109
75 Series...............................................................B-74 Couplers.........................................................B-109
Couplers............................................................. B-76 Nipples...........................................................B-109
Nipples............................................................... B-76 Probe..............................................................B-109
High Pressure Couplings
71 Series...............................................................B-77
Promotional Products-Keychains......................B-111
Couplers............................................................. B-79
Nipples............................................................... B-80 Thermoplastic Quick Couplings
3000 Series...........................................................B-81 Coupling Selection Guide.................................. C-2
Couplers...........................................................B-82
Nipples.............................................................B-82 Spectrum Series.................................................. C-3
TC Series..............................................................B-83 Couplers.................................................... C-4, C-5
Couplers...........................................................B-83 Nipples............................................................. C-5
Nipples.............................................................B-83
Swivels
1141 Series............................................................B-84
Couplers...........................................................B-84 PS Series
Nipples.............................................................B-84 Introduction ........................................................... D-2
Seal Options........................................................... D-2
High Flow Couplings
How To Order ........................................................ D-4
ST Series.............................................................B-85
Repair Kits ............................................................. D-4
Couplers...........................................................B-86
In-Line................................................................... D-5
Nipples.............................................................B-87
90°..................................................... ....................D-8


Minneapolis, MN
Table of Contents
S Series
Introduction ..........................................................D-13
Repair Kits ............................................................D-13
How To Order .......................................................D-14
90°........................................................................D-15
Valves
Introduction ............................................................E-1
Check Valves
Selection Guide & General
Technical Information ..............................................E-3
DT Series................................................................E-4
Ordering Information................................................E-8
CV Series................................................................E-9
Ordering Information.............................................. E-11
DC Series ............................................................. E-12

CPIFF Series (soft seat).......................................... E-14
S6C Series (soft seat)............................................ E-15
3C Series (soft seat).............................................. E-15
2600 Series (swing type)........................................ E-17
Pressure/Vacuum Relief Valves

H1 & HM1 Series ...................................................E-18
Ordering Information..............................................E-18
PV Series.............................................................. E-19
Thermal Bypass Valves

TH Series .............................................................E-20
Appendices
Fluid Compatibility Chart............................................ I
Part Number Index................................................... VII
Safety Guide............................................................ XIX
Offer of Sale............................................................. XXI
Glossary of Terms.................................................. XXII

Minneapolis, MN
Minneapolis, MN
Pneumatic Quick Couplings
A Pneumatics
Single Shut-Off Couplings General Ordering Information
Single Shut-Off couplings are primarily used for pneumatic When ordering Parker coupler bodies and nipples, please state the
applications, connecting air tools, hoses, or other implements to part number of each type of coupler body and each type of nipple
compressed air supplies. They are also used with other gases, desired. List coupler bodies and nipples as separate items rather
and with the exception of the E-z-mate Series can be used with than in combinations. Be sure to double check thread or hose sizes
low pressure fluids. The coupler half contains a shut-off valve of items required.
that is automatically opened when a mating nipple is inserted and
Many of Parker’s coupling products are available with unique non-
automatically closes when the nipple is removed.
standard options well suited to very specific applications. Examples
Parker Single Shut-Off couplings come in three basic designs: of unusual end use applications might include:
general purpose/manual connect, general purpose/push-to- high temperatures (above 250° F), extremely caustic/corrosive
connect, and special purpose. solutions passing through the coupling, external/environmental
corrosion situations, or other high wear and tear situations such as
The standard seal material for all Parker Single Shut-Off
dragging the product along the ground. It is always recommended
couplers is Nitrile. Ethylene Propylene, Fluorocarbon, and
that the Quick Coupling Division be contacted with any questions
Neoprene seals are available as options. See the comprehensive
concerning specific product application needs.
Fluid Compatibility Chart that provides guidelines for seal and body
material selection. When there is need for further assistance in
selecting the appropriate seal material, please consult the Quick
Coupling Division.
Checklist for Selecting Quick Couplings

q What are the functional requirements of the coupling?
q What is the maximum working pressure of the application?
q Which seals and body material are compatible with the system’s fluid?
q Is the application static or dynamic?
q What size coupler/hose is required?
q What is the maximum pressure drop suitable for the application?
q Does the application require the ability to connect and disconnect under pressure?
q What is the media temperature and ambient temperature?
q What end configurations are required?
q Is an industry interchange coupler required?
q Is air inclusion and fluid loss a concern in the application?
A-1 Parker Hannifin Corporation

Minneapolis, MN
Table of Contents
Introduction.......................................................... A-1
Coupling Selection & Ordering Guide.................. A-3
A Pneumatics
Interchange Match-up Chart............................. ..A-5

General Purpose Couplings
Industrial Interchange Nipples.............................. A-6
20 Series ............................................................ A-9
30 Series............................................................A-12
Rectus 21, 23, 30 Series......................................A-15
(formerly HF Series)
Tru-Flate Design, Automotive Interchange
10 Series............................................................A-18
ARO 210 Interchange
50 Series........................................................... A-22
Universal Coupler (accepts Industrial Interchange,
Tru-Flate, and 50 Series Nipples)
UC Series.......................................................... A-25
Lincoln “Long Stem” Interchange
70 Series........................................................... A-26
European High Flow Interface
Rectus 25 Series............................................... A-28
(formerly RF Series)
Schrader Twist-Lock Interchange

TL Series............................................................A-31
Snap-tite Design
IH Series............................................................A-34
Special Purpose Couplings

Tool-Mate Series (Non-Marring)
Rectus 25 and Industrial Interchange Styles.........A-36
Tool-Mate Series (Non-Marring, Exhaust)
Rectus 25 and Industrial Interchange Styles.........A-38
E-z-mate Series (Exhaust)
Industrial Interchange.........................................A-40
GF Series
Natural & Propane Gas........................................A-42
* UC Series is a replacement for the HA Series.

Minneapolis, MN
Pneumatic Coupling Selection Guide
Pneumatic Coupling Selection Guide (by Interchange)
A Pneumatics
Body Connection Material* Locking Std Seal Std Seal Rated Coupler
Sizes (in.) style B S SS P Mechanism Material Temp Range Pressure Series
Industrial Interchange Couplers

General Purpose
1/4 to 1/2 Manual Sleeve n n n Ball Nitrile -40° to +250° F 300 psi 20 Series
1/8 to 3/8 Push-to-Connect n n Ball Nitrile -40° to +250° F 300 psi Rectus 21, 23, 30 Series
1/4 to 3/4 Push-to-Connect n Pawl Nitrile -40° to +250° F 300 psi 30 Series
1/4 Push-to-Connect n Ball Nitrile -40° to +250° F 150 psi Universal Series
Special Purpose
1/4 & 3/8 Push-to-Connect n n Fingers Nitrile -40° to +250° F 300 psi Tool-Mate (PBH)
(non-marring)
1/4 to 1/2 Push-to-Connect n n Fingers Nitrile -40° to +250° F 300 psi Tool-Mate (PBS)
(non-marring, exhaust)
1/4 to 3/4 Push-to-Connect n Ball Nitrile -40° to +250° F 300 psi E-z-mate (exhaust)
Tru-Flate Interchange Couplings

1/4 to 1/2 Manual Sleeve n n Ball Nitrile -40° to +250° F 300 psi 10 Series
ARO 210 Interchange Couplings

1/4 Manual Sleeve n n Ball Nitrile -40° to +250° F 300 psi 50 Series
Lincoln “Long Stem” Interchange Couplings

1/4 Manual Sleeve n Ball Nitrile -40° to +250° F 300 psi 70 Series
Common High-Flow European Interchange Couplings

1/4 Push-to-Connect n n Ball Nitrile -40° to +250° F 300 psi Rectus 25 Series
n n Tool-Mate (PER)
1/4 Push-to-Connect Fingers Nitrile -40° to +250° F 300 psi
(non-marring)
n n Tool-Mate (PES)
1/4 Push-to-Connect Fingers Nitrile -40° to +250° F 300 psi
(non-marring, exhaust)
Schrader Twist -Lock Interchange Couplings
1/4 & 1/2 Push-to-Connect n n Cam Nitrile -40° to +250° F 300 psi TL Series
Continued on next page
* Material Code: B = Brass, S = Steel, SS = Stainless Steel, P = Plastic
Optional Materials and Features: Contact QCD for availability and additional options.
To select proper seal materials, see Fluid Compatibility Chart or contact QCD.
(add code to part number)
Code Description Applies to
Nipples (std is steel)
prefix B Brass body Couplers (3/8” & 1/2” sizes only)
suffix N Stainless steel springs, locking balls & brass valves Couplers (10, 20, 30, 50 & 70 Series)
suffix -SL Sleeve-Lok Couplers (10, 20, 30, 50 & 70 Series)
suffix R Grip Ring sleeve Couplers (10 & 20 Series)
suffix W Ethylene Propylene seal material (-65º to + 400º F) Couplers
suffix Y Fluorocarbon seal material (-30º to + 400º F) Couplers
WARNING: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information go to www.P65Warnings.ca.gov

Minneapolis, MN
Pneumatic Coupling Selection Guide - continued
Pneumatic Coupling Selection Guide

A Pneumatics
Body Sizes Connection Material* Locking Std Seal Std Seal Rated Pres- Coupler
(in.) style B S SS P Mechanism Material Temp Range sure Series
Special Purpose - Natural and Propane Gas Couplings
1/4 to 1-1/4 Manual Sleeve n Ball Fluorocarbon 32° to +200° F 60 psi max GF Series
Thermoplastic Couplings
1/8 & 3/8 Push-to-Connect n Finger Lock Nitrile or Fluo- 0° to +180° F Vacuum to Spectrum Series
** rocarbon 0° to +250° F 145 psi
* Material Code: B = Brass, S = Steel, SS = Stainless Steel, P = Plastic
** Spectrum Series material options:

• Acetal/316SS
• PVDF/316SS (subject to quote from the division)
• PVDF/PEEK™ (subject to quote from the division)

Minneapolis, MN
Pneumatic Quick Couplings Interchange Match-up Chart
General Purpose
Popular Coupling Designs
A Pneumatics
Parker’s Quick Coupling Division manufactures quick couplings to interchange with popular designs that have become accepted
standards in the industry today. The actual size nipple chart below can be used to help select Parker Quick Couplings that will
interchange with specific nipple designs and sizes.
10 Series 20 Series, 30 Series, 50 Series (ARO-210 Interchange)

(Tru-Flate Automotive Interchange) Rectus 21, 23, 30 Series,
E-z-mate (Industrial Interchange)
1/4” Body Size
1/8” Body Size

1/4” Body Size
3/8” Body Size
1/4” Body Size 70 Series (Lincoln Interchange)
1/2” Body Size

3/8” Body Size
1/4” Body Size

Twist-Lock ( Schrader Interchange)
Rectus 25 Series
1/2” Body Size (European Interchange)
1/4” Body Size
1/4” Body Size
1/2” Body Size
3/4” Body Size

Minneapolis, MN
Industrial Interchange Nipples
Pneumatic Quick Couplings A-A-59439, MIL- C-4109F Design
General Purpose Non-valved, straight through
Parker Industrial Interchange Nipples are compatible for use

with 20 Series, 30 Series, Rectus 21, 23, 30 Series, Universal
A Pneumatics
or E-z-mate couplers. The standard male tip of the pneumatic

industry, these nipples are interchangeable with similar
nipples manufactured to the same requirements.
Features:
• Conforms to A-A-59439 (MIL-C-4109F, ISO 6150-B)
requirements for global interchangeability
• Steel nipples have hardened wear points and
load-bearing areas
• Unvalved style nipple mates with valved couplers
Applications include:
• Air compressors
• Pneumatic tools
• Drop-down air lines
Optional Material:
Code Description Part Number Example
prefix B Brass body BH1E
Contact QCD for availability and additional options.
Nipples - Female Pipe Thread
Part Number Exposed

Body Part Number Part Number Largest Wrench Weight
Stainless Thread Size Length
Size Brass Steel Length* Diameter Flats (lbs.)
Steel (303) **
1/4 – H1C – 1/8-27 NPTF 1.48 0.71 0.58 0.50 0.03
1/4 BH3C H3C SH3C 1/4-18 NPTF 1.56 0.80 0.72 0.62 0.05
1/4 – H3C-E SH3C-E 3/8-18 NPTF 1.60 0.83 0.94 0.81 0.08
3/8 – H1E – 1/4-18 NPTF 1.60 0.69 0.72 0.62 0.06
3/8 BH3E H3E – 3/8-18 NPTF 1.72 0.74 0.94 0.81 0.10
3/8 – H3E-F – 1/2-14 NPTF 1.89 0.90 1.16 1.00 0.13
1/2 – H1F – 3/8-18 NPTF 2.03 0.79 0.94 0.81 0.12
1/2 BH3F H3F – 1/2-14 NPTF 2.20 0.83 1.16 1.00 0.19
1/2 – H3F-G – 3/4-14 NPTF 2.30 1.05 1.44 1.25 0.26
3/4 – H3G-F – 1/2-14 NPTF 2.22 1.06 1.16 1.00 0.23
3/4 – H3G – 3/4-14 NPTF 2.18 1.02 1.44 1.25 0.34
3/4 – H3G-J – 1-11 1/2 NPTF 2.41 1.25 1.80 1.63 0.47
* This dimension represents the portion of the nipple that is exposed when the nipple is connected to a Parker 20 Series coupler.
**Prop 65 Warning does not apply to stainless steel part numbers.

Minneapolis, MN
Nipples - Male Pipe Thread
A Pneumatics
Part Number Exposed
Size Brass Steel Length* Diameter Flats (lbs.)
Steel (303)**
1/4 – H0C – 1/8-27 NPTF 1.68 0.92 0.58 0.50 0.05
1/4 BH2C H2C SH2C 1/4-18 NPTF 1.66 0.89 0.65 0.56 0.06
1/4 – H2C-E SH2C-E 3/8-18 NPTF 1.90 1.14 0.80 0.69 0.07
3/8 – H00E – 1/8-27 NPTF 1.68 0.73 0.72 0.62 0.08
3/8 – H0E – 1/4-18 NPTF 1.90 0.95 0.72 0.62 0.08
3/8 BH2E H2E – 3/8-18 NPTF 1.90 0.95 0.80 0.69 0.09
3/8 – H2E-F – 1/2-14 NPTF 2.03 1.09 1.02 0.88 0.15
1/2 – H0F – 3/8-18 NPTF 2.20 0.96 0.79 0.69 0.16
1/2 BH2F H2F – 1/2-14 NPTF 2.35 1.09 1.01 0.88 0.18
1/2 – H2F-G – 3/4-14 NPTF 2.40 1.16 1.22 1.06 0.24
3/4 – H2G-F – 1/2-14 NPTF 2.32 1.16 1.16 1.00 0.22
3/4 BH2G H2G – 3/4-14 NPTF 2.28 1.12 1.22 1.06 0.28
3/4 – H2G-J – 1-11 1/2 NPTF 2.56 1.40 1.52 1.31 0.36
Nipples - Standard Hose Barb
Part Number Exposed

Body Part Number Part Number Largest
Stainless Hose I.D. Length Weight (lbs.)
Size Brass Steel Length* Diameter
Steel (303) **
1/4 – H8C – 1/4 1.72 0.95 0.46 0.04
1/4 – – SH8C 1/4 2.09 1.33 0.56 0.04
1/4 – H8C-D – 5/16 1.96 1.20 0.50 0.04
1/4 – H9C SH9C 3/8 1.96 1.20 0.50 0.05
3/8 – H5E – 3/8 1.85 0.90 0.59 0.07
3/8 – H6E – 1/2 2.09 1.14 0.68 0.08
1/2 – H4F – 3/8 2.36 1.12 0.66 0.10
1/2 – H5F – 1/2 2.36 1.12 0.66 0.11
1/2 – H5F-G – 3/4 2.95 1.71 0.87 0.18
3/4 – H5G-F – 1/2 2.47 1.31 0.93 0.19
3/4 BH5G H5G – 3/4 3.00 1.84 0.93 0.25
3/4 – H5G-J – 1 3.24 2.08 1.24 0.36
**Prop 65 Warning does not apply to stainless steel part numbers.

Minneapolis, MN
Nipples - Push-Lok Hose Barb**

A Pneumatics
Body Part Number Part Number Exposed Largest

Hose I.D. Length Weight (lbs.)
Size Brass Steel Length* Diameter
1/4 BH8CP H8CP 1/4 1.74 0.97 0.69 0.04

1/4 – H9CP 3/8 1.96 1.19 0.86 0.05
3/8 – H4EP 1/4 1.87 0.92 0.69 0.06
3/8 – H5EP 3/8 2.02 1.07 0.86 0.07
3/8 – H6EP 1/2 2.21 1.27 0.97 0.09
1/2 – H4FP 3/8 2.36 1.11 0.86 0.11
1/2 – H5FP 1/2 2.48 1.24 0.97 0.11
1/2 – H6FP 5/8 2.95 1.71 1.14 0.14
* *Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps.

Minneapolis, MN
20 Series Couplers
Pneumatic Quick Couplings - Accepts Industrial Interchange Nipples
General Purpose Manual sleeve, single shut off
20 Series Pneumatic Couplers mate with Industrial

Interchange nipples, the standard male tip of the pneumatic
A Pneumatics
industry. Available options include Sleeve-Lok, stainless steel
locking balls and springs, and grip-ring sleeve.
Features:
• Mates with Industrial Interchange nipples manufactured to
A-A-59439 (MIL-C-4109F, ISO 6150-B) global standards
• 1/4” body size has a brass body and steel valve, 3/8” body
size has all steel construction
• Tubular valve delivers high flow with minimal pressure drop
• Integral sleeve guard resists accidental disconnection
• Standard seal is Nitrile
Applications:
• Air compressors
• Pneumatic tools
• Water
• Grease
Performance
• Paint
20 Series (1/4", 3/8", 1/2" sizes)
160
140 20 Series Specifications

1/2"
Body Size 1/4 3/8 1/2
120
Rated Pressure (psi) 300
Air Flow in SCFM
100 Temperature Range (std

-40º to +250º F
seals)
80 Locking Device 4 balls 8 balls 8 balls
Vacuum Data (in. Hg.) —
60
3/8"
Disconnected (coupler only) Not Recommended
40 27.4
Connected
1/4"
20
0 Repair Kits
0 5 10 15 20
Pressure Drop in PSID Body
Seal Material Part No.
Size
100 PSI Inlet Pressure
80 PSI Inlet Pressure 1/4 Nitrile 21K
1/4 Ethylene Propylene 21KW
1/4 Fluorocarbon 21KY
3/8 Nitrile 14K
1/2 Nitrile 16K
3/4 Nitrile 38K

Minneapolis, MN
20 Series Couplers
Pneumatic Quick Couplings Accepts Industrial Interchange Nipples
Couplers - Female Pipe Thread

A Pneumatics
Part Number
Size Brass Steel Diameter Flats (lbs.)
Steel (303) **
1/4 B23A – – 1/8-27 NPTF 1.83 0.90 0.75 0.20
1/4 B23 – S23 1/4-18 NPTF 1.83 0.90 0.75 0.19
1/4 B23E – – 3/8-18 NPTF 1.95 0.94 0.81 0.20
3/8 – 25C – 1/4-18 NPTF 2.22 1.06 0.88 0.30
3/8 B25 25 – 3/8-18 NPTF 2.28 1.06 0.88 0.32
3/8 – 25F – 1/2-14 NPTF 2.55 1.16 1.00 0.34
1/2 – 17E – 3/8-18 NPTF 2.74 1.19 1.00 0.46
1/2 B17 17 – 1/2-14 NPTF 2.96 1.19 1.00 0.50
1/2 – 17G – 3/4-14 NPTF 3.19 1.44 1.25 0.56
Couplers - Male Pipe Thread
Part Number
Size Brass Steel Diameter Flats (lbs.)
Steel (303) **
1/4 B22A – – 1/8-27 NPTF 1.89 0.90 0.75 0.18
1/4 B22 – S22 1/4-18 NPTF 2.05 0.90 0.75 0.18
1/4 B22E – – 3/8-18 NPTF 2.08 0.90 0.75 0.19
3/8 – 24C – 1/4-18 NPTF 2.36 1.06 0.88 0.26
3/8 B24 24 – 3/8-18 NPTF 2.39 1.06 0.88 0.29
3/8 – 24F – 1/2-14 NPTF 2.55 1.16 0.88 0.29
1/2 – 16E – 3/8-18 NPTF 2.93 1.19 1.00 0.42
1/2 B16 * 16 – 1/2-14 NPTF 3.08 1.19 1.00 0.47
1/2 – 16G – 3/4-14 NPTF 3.21 1.30 1.13 0.56
* Coupler has brass body and steel sleeve.
** Prop 65 Warning does not apply to stainless steel part numbers.
Optional Materials and Features:

prefix B Brass body (Couplers - 3/8” & 1/2” sizes only) B24C
suffix N Stainless steel springs, locking balls & brass valves (Couplers) B24N
suffix -SL Sleeve-Lok (Couplers) 24-SL
suffix R Grip Ring sleeve (Couplers) 24R
suffix W Ethylene Propylene seal material (-65º to + 400º F) (Couplers) 24W
suffix Y Fluorocarbon seal material (-30º to + 400º F) (Couplers) 24Y

Minneapolis, MN
20 Series Couplers
Couplers - Standard Hose Barb
A Pneumatics
Body Part No. Part No. Largest
Hose I.D. Length Wrench Flats Weight (lbs.)
Size Brass Steel Diameter
1/4 B20-3B – 1/4 2.49 0.90 0.75 0.18
1/4 B20-4B – 5/16 2.49 0.90 0.75 0.18
1/4 B20-5B – 3/8 2.49 0.90 0.75 0.18
3/8 – 24-5B 3/8 2.60 1.06 0.88 0.27
3/8 – 24-6B 1/2 2.60 1.06 0.88 0.28
1/2 – 16-5B 3/8 3.14 1.19 1.00 0.41
1/2 – 16-6B 1/2 3.14 1.19 1.00 0.43
1/2 – 16-7B 3/4 3.60 1.19 1.00 0.48
Couplers - Push-Lok Hose Barb*
Body Part No. Part No. Largest

Hose I.D. Length Wrench Flats Weight (lbs.)
Size Brass Steel Diameter
1/4 B20-3BP – 1/4 2.32 0.90 0.75 0.18
1/4 B20-5BP – 3/8 2.47 0.90 0.75 0.19
3/8 – 24-5BP 3/8 2.88 1.06 0.88 0.27
1/2 – 16-5BP 3/8 3.35 1.19 1.00 0.41
1/2 – 16-6BP 1/2 3.46 1.19 1.00 0.43
* Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps.
NOTE: See Table of Contents for pneumatic Industrial Interchange nipples used with 20 Series couplers.

Minneapolis, MN
30 Series Couplers
Pneumatic Quick Couplings - Accepts Industrial Interchange Nipples
General Purpose Push-to-connect sleeve, single shut off
30 Series Pneumatic Couplers mate with Industrial Interchange

nipples, the standard male tip of the pneumatic industry. The
A Pneumatics
couplers have brass bodies. Standard seal is Nitrile.
Features:
• Mates with Industrial Interchange nipples manufactured to
A-A-59439 (MIL-C-4109F, ISO 6150-B) global standards
• Tubular valve delivers high flow with minimal pressure drop
• Push-to-connect operation
• Options include Sleeve-Lok, brass valve for added corrosion
resistance, and alternative seal materials
• Air compressors
• Pneumatic tools
• Water
• Grease
• Paint
Performance 30 Series (1/4" & 3/8" sizes)

70
30 Series Specifications
60 Body Size 1/4 3/8 1/2 3/4
3/8"
50
Temperature Range (std
-40º to +250º F
Air Flow in SCFM
seals)
40
Locking Device 3 pawls 3 pawls 6 pawls 6 pawls
30 Vacuum Data (in. Hg.) —
1/4"
20
Connected 27.4
10
0
0 5 10 15 20
Pressure Drop in PSID
Repair Kits
100 PSI Inlet Pressure 80 PSI Inlet Pressure
Body
30 Series (1/2" & 3/4" sizes) Size
220
1/4 Nitrile 21K
200
180 1/4 Fluorocarbon 21KY
160 3/8 Nitrile 14K
3/4"
140 3/8 Ethylene Propylene 14KW
Air Flow in SCFM
120 3/8 Fluorocarbon 14KY

100 1/2 Nitrile 16K
1/2" Ethylene Propylene 16KW
80
1/2
60
3/4 Nitrile 38K
40
20
0
0 5 10 15 20
100 PSI Inlet Pressure 80 PSI Inlet Pressure

Minneapolis, MN
30 Series Couplers
A Pneumatics
Body
Part No. Brass Thread Size Length Largest Diameter Wrench Flats Weight (lbs)
Size
1/4 B33A 1/8-27 NPTF 1.96 1.20 0.75 0.30
1/4 B33 1/4-18 NPTF 1.96 1.20 0.75 0.28
1/4 B33E 3/8-18 NPTF 2.03 1.20 0.81 0.30
3/8 B35C 1/4-18 NPTF 2.26 1.39 0.88 0.42
3/8 B35 3/8-18 NPTF 2.33 1.39 0.88 0.42
3/8 B35F 1/2-14 NPTF 2.57 1.39 1.00 0.46
1/2 B37E 3/8-18 NPTF 2.76 1.52 1.00 0.56
1/2 B37 1/2-14 NPTF 3.00 1.52 1.00 0.66
1/2 B37G 3/4-14 NPTF 3.12 1.52 1.25 0.73
3/4 B39F 1/2-14 NPTF 2.85 1.90 1.31 0.15
3/4 B39 3/4-14 NPTF 2.99 1.90 1.31 1.10
3/4 B39J 1-11 1/2 NPTF 3.18 1.90 1.63 1.24
Body
Part No. Brass Thread Size Length Largest Diameter Wrench Flats Weight (lbs)
Size
1/4 B32A 1/8-27 NPTF 2.03 1.20 0.75 0.27
1/4 B32 1/4-18 NPTF 2.18 1.20 0.75 0.28
1/4 B32E 3/8-18 NPTF 2.18 1.20 0.75 0.28
3/8 B34C 1/4-18 NPTF 2.38 1.39 0.88 0.36
3/8 B34 3/8-18 NPTF 2.44 1.39 0.88 0.39
3/8 B34F 1/2-14 NPTF 2.57 1.39 0.88 0.41
1/2 B36E 3/8-18 NPTF 2.92 1.52 1.00 0.58
1/2 B36 1/2-14 NPTF 3.09 1.52 1.00 0.61
1/2 B36G 3/4-14 NPTF 3.12 1.52 1.13 0.67
3/4 B38 3/4-14 NPTF 2.95 1.90 1.31 0.91
3/4 B38J 1-11 1/2 NPTF 3.12 1.90 1.31 0.99

Minneapolis, MN
30 Series Couplers

A Pneumatics
Body
Part No. Brass Hose I.D. Length Largest Diameter Wrench Flats Weight (lbs)
Size
1/4 B30-3B 1/4 2.62 1.20 0.75 0.27
1/4 B30-4B 5/16 2.62 1.20 0.75 0.27
1/4 B30-5B 3/8 2.62 1.20 0.75 0.28
3/8 B34-5B 3/8 2.65 1.39 0.88 0.39
3/8 B34-6B 1/2 2.65 1.39 0.88 0.41
1/2 B36-6B 1/2 3.13 1.52 1.00 0.59
1/2 B36-7B 3/4 3.60 1.52 1.00 0.65
3/4 B38-7B 3/4 3.69 1.90 1.31 0.93
3/4 B38-8B 1 3.93 1.90 1.31 1.03
Couplers - Push Lok Hose Barb*
Body
Part No. Brass Hose I.D. Length Largest Diameter Wrench Flats Weight (lbs)
Size
1/4 B30-3BP 1/4 2.45 1.20 0.75 0.27
1/4 B30-5BP 3/8 2.60 1.20 0.75 0.29
3/8 B34-5BP 3/8 2.82 1.39 0.88 0.40
1/2 B36-6BP 1/2 3.46 1.52 1.00 0.56

suffix -SL Sleeve-Lok (Couplers) B34-SL
suffix W Ethylene Propylene seal material (-65º to + 400º F) (Couplers) B34W
suffix Y Fluorocarbon seal material (-30º to + 400º F) (Couplers) B34Y

Minneapolis, MN
Rectus 21, 23, 30 Series Couplers
General Purpose Formerly HF Series
Push-to-connect sleeve, single shut off
Rectus 21, 23, 30 Series Pneumatic Quick Couplers connect
A Pneumatics
with Industrial Interchange nipples, the standard male tip of
the pneumatic industry. The 1/8” and 1/4” couplers have
nickel plated brass construction, a corrosion resistant valve,
stainless steel locking balls and a stainless steel valve spring.
The 3/8” couplers have nickel plated steel construction, a
corrosion resistant valve, stainless steel locking pins and a
stainless
steel valve spring.
Features:
• Integral sleeve guard protects against accidental
disconnection
• Slim profile
Performance Applications include:

Rectus 21, 23, 30 Series (1/8" & 1/4" sizes)
• Air compressors
40 • Pneumatic tools
35
30 Rectus 21, 23, 30 Series Specifications

1/4"
Body Size 1/8 1/4 3/8
Air Flow in SCFM
25
Rated Pressure (psi) 250 300 300
-4º to +212º F
seals)
15
Locking Device 5 balls 4 balls 6 balls
1/8"
10 Vacuum Data (in. Hg.)
5
0
0 5 10 15 20
Rectus 21, 23, 30 Series (3/8" sizes)

220
200
180
160
140
Air Flow in SCFM
120
100
3/8"
80
60
40
20
0
0 5 10 15 20

Minneapolis, MN
A Pneumatics
1/8” Body Size Couplers - Female Pipe Thread
New Part No.

Body Old Part No. Largest Wrench Weight
Nickel Plated Thread Size Length
Size Brass Diameter Flats (lbs.)
Brass
1/8 21KAIN10MPN HF-121-2FP 1/8-27 NPSF 1.42 0.63 0.55 0.06
1/8 21KAIN13MPN HF-121-4FP 1/4-18 NPSF 1.81 0.63 0.67 0.10
1/8” Body Size Couplers - Male Pipe Thread
New Part No.

Brass
1/8 21KAAN10MPN HF-121-2MP 1/8-27 NPT 1.50 0.63 0.55 0.06
1/8 21KAAN13MPN HF-121-4MP 1/4-18 NPT 1.61 0.63 0.55 0.07
1/8” Body Size Nipples - Female Pipe Thread
New Part No.

Brass
1/8 21SFIN10MXN HF-124-2FP 1/8-27 NPSF 1.08 0.58 0.50 0.03
1/8 21SFIN13MXN HF-124-4FP 1/4-18 NPSF 1.34 0.78 0.67 0.07
1/8” Body Size Nipples - Male Pipe Thread
New Part No.

Body Old Part No. Largest Weight
Nickel Plated Thread Size Length Wrench Flats
Size Brass Diameter (lbs.)
Brass
1/8 21SFAN10MXN HF-124-2MP 1/8-27 NPT 1.06 0.51 0.44 0.03
1/8 21SFAN13MXN HF-124-4MP 1/4-18 NPT 1.25 0.63 0.56 0.05

Minneapolis, MN
A Pneumatics
1/4, 3/8” Body Size Couplers - Female Pipe Thread
New Part No.

Body New Part No. Old Part No. Largest Wrench Weight
Size Nickel Plated Steel Brass Diameter Flats (lbs.)
Brass
1/4 23KAIN13MPN - HF-251-4FP 1/4-18 NPSF 2.19 0.99 0.81 0.26
1/4 23KAIN17MPN - HF-251-6FP 3/8-18 NPSF 2.34 0.99 0.81 0.27
3/8 - 30KAIN13SPN HF-371-4FP 1/4-18 NPSF 2.17 1.19 0.87 0.33
1/4, 3/8” Body Size Couplers - Male Pipe Thread
Body New Part No. New Part No. Old Part No. Largest Wrench Weight
Thread Size Length
Size Nickel Plated Brass Nickel Plated Steel Brass Diameter Flats (lbs.)
1/4 23KAAN13MPN - HF-251-4MP 1/4-18 NPTF 2.34 0.99 0.81 0.25
1/4 23KAAN17MPN - HF-251-6MP 3/8-18 NPTF 2.37 0.99 0.81 0.26
3/8 - 30KAAN13SPN HF-371-4MP 1/4-18 NPTF 2.07 1.19 0.87 0.32
1/4, 3/8” Body Size Couplers - Standard Hose Barb
New Part No.

Nickel Plated Hose I.D. Length
Brass
1/4 23KATF06MPN - HF-251-4HB 1/4 2.81 0.99 0.81 0.26
1/4 23KATF10MPN - HF-251-6HB 3/8 2.81 0.99 0.81 0.27
3/8 - 30KATF10SPN HF-371-6HB 3/8 2.60 1.19 0.83 0.31
3/8 - 30KATF13SPN HF-371-8HB 1/2 2.60 1.19 0.83 0.34
1/4, 3/8” Body Size Couplers - Push-Lok Hose Barb*
New Part No.

Nickel Plated Hose I.D. Length
Brass
1/4 23KATP06MPN - HF-251-4PL 1/4 2.64 0.99 0.81 0.26
1/4 23KATP10MPN - HF-251-6PL 3/8 2.78 0.99 0.81 0.27
3/8 - 30KATP10SPN HF-371-6PL 3/8 2.54 1.19 0.83 0.33
3/8 - 30KATP13SPN HF-371-8PL 1/2 2.68 1.19 0.83 0.31

Minneapolis, MN
10 Series Couplers
Pneumatic Quick Couplings Tru-Flate Design (Automotive Interchange)
Parker’s 10 Series Pneumatic Couplers are the original Tru-Flate

design, commonly referred to as the automotive interchange. 1/4”
A Pneumatics
body size has a brass body, while standard 3/8” and 1/2” body sizes
have all steel construction. Sleeve options include Sleeve-Lok and
Grip-Ring sleeve .
Features:
• Tubular valve delivers high air flow with minimal pressure drop
• 3/8” and 1/2” size options include brass body with steel sleeve
• Brass body option with stainless steel springs and locking balls is
available for added corrosion resistance
• Steel nipples are case hardened
• Air compressors
• Pneumatic tools
• Water
• Grease
• Paint
Performance 10 Series (1/4", 3/8", 1/2" sizes)
Body Size 1/4 3/8 1/2
160
-40º to +250º F
seals)
120 Locking Device 4 balls 8 balls 8 balls
1/2"
Air Flow in SCFM
100 Vacuum Data (in. Hg.) —

80
Connected 27.4
60
3/8" Repair Kits
40 Body
Size
20
1/4" 1/4 Nitrile 21K
0 1/4 Ethylene Propylene 21KW
0 5 10 15 20
100 PSI Inlet Pressure 3/8 Nitrile 14K
80 PSI Inlet Pressure 3/8 Ethylene Propylene 14KW
1/2 Nitrile 16K
Optional Materials and Features: 1/2 Fluorocarbon 16KY
prefix B Brass body (Couplers - 3/8” & 1/2” sizes only) B14F
suffix -SL Sleeve-Lok (Couplers) 15-SL
suffix R Grip Ring sleeve (Couplers) 15R

Minneapolis, MN
10 Series Couplers
A Pneumatics
Body Exposed Largest Wrench Weight
Part No. Brass Part No. Steel Thread Size Length
Size Length** Diameter Flats (lbs)
1/4 – 1C 1/8-27 NPTF 1.28 0.55 0.58 0.50 0.05
1/4 B3C 3C 1/4-18 NPTF 1.47 0.74 0.72 0.62 0.05
1/4 – 3C-E 3/8-18 NPTF 1.50 0.77 0.94 0.81 0.07
3/8 – 1E 1/4-18 NPTF 1.60 0.67 0.72 0.62 0.07
3/8 – 3E 3/8-18 NPTF 1.68 0.77 0.94 0.81 0.10
1/2 – 1F 3/8-18 NPTF 2.05 0.83 0.94 0.81 0.13
1/2 – 3F 1/2-14 NPTF 2.27 1.05 1.16 1.00 0.18
1/2 – H3F-G 3/4-14 NPTF 2.38 1.13 1.44 1.25 0.26
Body Part No. Part No. Part No. Exposed Largest Wrench Weight
Thread Size Length
Size Brass Steel Stainless *** Length** Diameter Flats (lbs)
1/4 – 0C 1/8-27 NPTF 1.47 0.74 0.58 0.50 0.04
1/4 B2C 2C S2C 1/4-18 NPTF 1.62 0.89 0.65 0.56 0.06
1/4 – 2C-E – 3/8-18 NPTF 1.72 0.99 0.80 0.69 0.05
3/8 – 0E – 1/4-18 NPTF 1.88 0.95 0.72 0.62 0.08
3/8 – 2E – 3/8-18 NPTF 1.90 0.98 0.80 0.69 0.09
1/2 – 0F – 3/8-18 NPTF 2.33 1.12 0.79 0.69 0.13
1/2 – 2F – 1/2-14 NPTF 2.48 1.27 1.01 0.88 0.17
1/2 – H2F-G – 3/4-14 NPTF 2.53 1.29 1.30 1.13 0.24
** This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 10 Series coupler
*** Prop 65 Warning does not apply to stainless steel part numbers
Body Largest
Part No. Steel Hose I.D. Length Exposed Length** Weight (lbs)
Size Diameter
1/4 8C 1/4 1.63 .090 0.45 0.04
1/4 9C 3/8 2.00 1.27 0.55 0.05
3/8 5E 3/8 1.81 0.98 0.59 0.07
1/2 H4F 3/8 2.36 1.29 0.66 0.08
1/2 5F 1/2 2.36 1.60 0.66 0.11
1/2 H5F-G 3/4 2.95 1.91 0.87 0.18
** This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 10 Series coupler

Minneapolis, MN
10 Series Couplers
Nipples - Push-Lok Hose Barb*

A Pneumatics
Body Largest
Part No. Steel Hose I.D. Length Exposed Length** Weight (lbs)
Size Diameter
1/4 8CP 1/4 1.66 0.93 0.45 0.04
1/4 9CP 3/8 1.98 1.25 0.86 0.05
3/8 5EP 3/8 1.98 1.06 0.59 0.08
1/2 H4FP 3/8 2.52 1.27 0.86 0.11
1/2 H5FP 1/2 2.66 1.42 0.97 0.11
**This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 10 Series coupler
Body Largest
Part No. Brass Part No. Steel Thread Size Length Wrench Flats Weight (lbs)
Size Diameter
1/4 B13A – 1/8-27 NPTF 1.83 0.90 0.75 0.19
1/4 B13 – 1/4-18 NPTF 1.83 0.90 0.75 0.19
1/4 B13E – 3/8-18 NPTF 1.95 0.94 0.81 0.31
3/8 – 15C 1/4-18 NPTF 2.22 1.06 0.88 0.30
3/8 B15* 15 3/8-18 NPTF 2.28 1.06 0.88 0.34
3/8 – 15F 1/2-14 NPTF 2.55 1.16 1.00 0.46
1/2 – 17E 3/8-18 NPTF 2.74 1.19 1.00 0.46
1/2 B17* 17 1/2-14 NPTF 2.96 1.19 1.00 0.50
1/2 – 17G 3/4-14 NPTF 3.19 1.44 1.25 0.20
Body Largest
Part No. Brass Part No. Steel Thread Size Length Wrench Flats Weight (lbs)
Size Diameter
1/4 B12A – 1/8-27 NPTF 1.89 0.90 0.75 0.17
1/4 B12 – 1/4-18 NPTF 2.05 0.90 0.75 0.18
1/4 B12E – 3/8-18 NPTF 2.08 0.90 0.75 0.19
3/8 – 14C 1/4-18 NPTF 2.36 1.06 0.88 0.26
3/8 B14* 14 3/8-18 NPTF 2.39 1.06 0.88 0.27
3/8 – 14F 1/2-14 NPTF 2.55 1.06 0.88 0.28
1/2 – 16E 3/8-18 NPTF 2.93 1.19 1.00 0.42
1/2 B16* 16 1/2-14 NPTF 3.08 1.19 1.00 0.45
1/2 – 16G 3/4-14 NPTF 3.21 1.30 1.13 0.50

Minneapolis, MN
10 Series Couplers
A Pneumatics
Body Largest
Part No. Brass Part No. Steel Hose I.D. Length Wrench Flats Weight (lbs)
Size Diameter
1/4 B10-3B – 1/4 2.49 0.90 0.75 0.18
1/4 B10-4B – 5/16 2.49 0.90 0.75 –
1/4 B10-5B – 3/8 2.49 0.90 0.75 0.18
3/8 – 14-5B 3/8 2.60 1.06 0.88 0.26
3/8 – 14-6B 1/2 2.60 1.06 0.88 0.27
1/2 – 16-5B 3/8 3.14 1.19 1.00 0.41
1/2 – 16-6B 1/2 3.14 1.19 1.00 0.43
1/2 – 16-7B 3/4 3.60 1.19 1.00 0.48
Add suffix “N” to brass coupler part number for stainless steel springs and locking balls (ie B15N).
Add suffix “-SL” for Sleeve-Lok option.
Add suffix “R” for grip-ring sleeve (1/4” size only).
Body Largest
Part No. Brass Part No. Steel Hose I.D. Length Wrench Flats Weight (lbs)
Size Diameter
1/4 B10-3BP – 1/4 2.32 0.90 0.75 0.19
1/4 B10-5BP – 3/8 2.47 0.90 0.75 0.19
3/8 – 14-5BP 3/8 2.88 1.06 0.88 0.26
1/2 – 16-5BP 3/8 3.35 1.19 1.00 0.40
1/2 – 16-6BP 1/2 3.46 1.19 1.00 0.43

Minneapolis, MN
50 Series Couplers
Pneumatic Quick Couplings ARO 210 Interchange
50 Series Pneumatic Couplers are interchangeable with

ARO’s 210 series. Couplers have brass bodies. Nipples are
A Pneumatics
constructed of steel. Sleeve-Lok is an optional feature.
Features:
• Tubular valve delivers high air flow with minimal
pressure drop
• Stainless steel springs and locking balls option is available
for added corrosion resistance
• Air compressors
• Pneumatic tools
• Water
• Grease
• Paint
Performance 50 Series (1/4" size)

35
30 Body Size 1/4
25
Temperature Range (std seals) -40º to +250º F
1/4"
Air Flow in SCFM
Locking Device 4 balls

20
Vacuum Service Not Recommended
15
10
5
Repair Kits
0
Body
0 5 10 15 20 Seal Material Part No.
Size
1/4 Nitrile 21K
80 PSI Inlet Pressure 1/4 Ethylene Propylene 21KW


Minneapolis, MN
50 Series Couplers
A Pneumatics
Body Part No. Thread Largest Exposed Wrench Weight
Length
Size Steel Size Diameter Length** Flats (lbs)
1/4 A3C 1/4-18 NPTF 1.47 0.72 0.66 0.62 0.04
Body Part No. Thread Largest Exposed Wrench Weight

Length
Size Steel Size Diameter Length** Flats (lbs)
1/4 A2C 1/4-18 NPTF 1.62 0.65 0.82 0.56 0.05
Body Part No. Largest Exposed Wrench Weight

Hose I.D. Length
Size Steel Diameter Length** Flats (lbs)
1/4 A8C 1/4 1.63 .043 0.82 0.62 0.03
Body Part No. Largest Exposed Wrench Weight

Hose I.D. Length
Size Steel Diameter Length** Flats (lbs)
1/4 A8CP 1/4 1.65 .067 0.87 0.62 0.03
**This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 50 Series coupler

Minneapolis, MN
50 Series Couplers

A Pneumatics
Body Largest Wrench

Part No. Brass Thread Size Length Weight (lbs)
Size Diameter Flats
1/4 B53 1/4-18 NPTF 1.83 0.90 0.75 0.20
1/4 B53E 3/8-18 NPTF 1.95 0.94 0.81 0.21
Body Largest Wrench

Part No. Brass Thread Size Length Weight (lbs)
Size Diameter Flats
1/4 B52 1/4-18 NPTF 2.05 0.90 0.75 0.20
1/4 B52E 3/8-18 NPTF 2.08 0.90 0.75 0.21
Body Largest Wrench

Part No. Brass Hose I.D. Length Weight (lbs)
Size Diameter Flats
1/4 B50-3BP 1/4 2.32 0.90 0.75 0.19
1/4 B50-5BP 3/8 2.47 0.90 0.75 0.20

Minneapolis, MN
Universal Couplers
Pneumatic Quick Couplings Accepts three types of Nipples
UC Series Pneumatic Quick Couplers connect with Industrial

Interchange, 10 series (Tru-Flate), and 50 series (ARO 210) style
nipples. While the best performance is obtained by matching like
A Pneumatics
series couplers and nipples, the Universal Coupler permits multiple
series nipples to mate with one coupler.
Features: Applications include:
• Sleeve guard protects • Air compressors
against accidental • Pneumatic tools
disconnection
• Brass construction
• One coupler connects with
three nipple styles
• UC Series is a replacement
for the HA Series.
Performance UC Series Coupler (1/4" size) UC Series Specifications

35
Rated Temperature
Body Locking Vacuum
Pressure Range
30 Size Device Service
(psi) (Nitrile seals)
Not
25 1/4 150 -40º to +250º F 4 balls
1/4" Recommended
Air Flow in SCFM
20
15 UC - 251 - 4 FP - * * Contact the Division for availability
10 UC Series Seal Options

Blank - Nitrile
F - Fluorocarbon
5
E - Ethylene Propylene
Body Size Port Configuration
0 25 - 1/4" FP - Female Pipe
0 5 10 15 20 MP - Male Pipe
Pressure Drop in PSID HB - Standard Hose Barb*
100 PSI Inlet Pressure Unit PL - Push-Lok Hose Barb*
80 PSI Inlet Pressure 1 - Valved Coupler Port Size (1/16 of an inch)
Body Part No. Largest

Thread Size Length Wrench Flats Weight (lbs.)
Size Brass Diameter
1/4 UC-251-4FP 1/4-18 NPSF 2.06 0.98 0.81 0.23
1/4 UC-251-6FP 3/8-18 NPSF 2.21 0.98 0.81 0.23

Size Brass Diameter
1/4 UC-251-4MP 1/4-18 NPTF 2.21 0.98 0.81 0.22
1/4 UC-251-6MP 3/8-18 NPTF 2.24 0.98 0.81 0.23

Minneapolis, MN
70 Series Couplers
Pneumatic Quick Couplings Lincoln (Long) Interchange
70 Series Pneumatic Couplers are interchangeable with

Lincoln’s “Long Stem” series couplings. Couplers have
A Pneumatics
brass bodies and steel valves. Nipples are constructed of

steel. Sleeve-Lok is an optional feature.
Features
pressure drop
Applications:
• Air compressors
• Pneumatic tools
• Water
• Grease
• Paint
Performance 70 Series (1/4" size)

35
30 Body Size 1/4
25
Air Flow in SCFM
1/4"
20
15
10
5 Repair Kits
Body
0 Seal Material Part No.
Size
0 5 10 15 20
1/4 Nitrile 21K
80 PSI Inlet Pressure 1/4 Fluorocarbon 21KY

Size Brass Diameter
1/4 B73 1/4-18 NPTF 2.40 0.90 0.75 0.25

Minneapolis, MN
70 Series Couplers
Pneumatic Quick Couplings Lincoln (Long) Interchange
A Pneumatics
Size Brass Diameter
1/4 B72 1/4-18 NPTF 2.62 0.90 0.75 0.25
Body Part No. Exposed Largest

Size Steel Length* Diameter
1/4 L3C 1/4-18 NPTF 2.10 0.77 0.65 0.56 0.05
Body Part No. Exposed Largest

Size Steel Length* Diameter
1/4 L2C 1/4-18 NPTF 2.25 0.92 0.65 0.56 0.06
* This dimension represents portion of nipple that is exposed when nipple is inserted in a Parker 70 Series coupler.


Minneapolis, MN
Rectus 25 Series Couplers
Pneumatic Quick Couplings High Flow European Interface
General Purpose Formerly RF Series
Rectus 25 Series Pneumatic Couplers are designed to

A Pneumatics
increase flow and reduce pressure drop through the coupling.

Rectus 25 nipples have up to 2-1/2 times larger flow area
than standard industrial interchange nipples. The increased
flow results in greater tool efficiency and decreased air costs.
Couplers are nickel plated brass and nipples are steel.
Features:
• Aerodynamic valve design
• Flow rates on 1/4” is greater than many 3/8” body size
couplers
• Integral sleeve guard protects against accidental
disconnection
• Functionally interchanges with a common high-flow
European design. 1/4 Rectus 25 interchanges with CEJN
320.
• Air compressors
Performance Rectus 25 Series (1/4" body size)

• Pneumatic tools
with 1/4" Female NPSF
160
140
120
Air Flow in SCFM
100 1/4" Body Size
80
60
40
1/4" Body Size
1/4" Female NPSF
20
0
0 5 10 15 20
Rectus 25 Series Specifications

Body Size 1/4

Minneapolis, MN
A Pneumatics
New Part No.
Body Old Part No. Largest
Nickel Plated Thread Size Length Wrench Flats Weight (lbs.)
Size Brass Diameter
Brass
1/4 25KAIN13MPN RF-251-4FP 1/4-18 NPSF 2.19 0.99 0.81 0.26
1/4 25KAIN17MPN RF-251-6FP 3/8-18 NPSF 2.34 0.99 0.81 0.27
New Part No.

Nickel Plated Thread Size Length Wrench Flats Weight (lbs.)
Size Brass Diameter
Brass
1/4 25KAAN13MPN RF-251-4MP 1/4-18 NPTF 2.34 0.99 0.81 0.24
1/4 25KAAN17MPN RF-251-6MP 3/8-18 NPTF 2.37 0.99 0.81 0.25
New Part No.

Nickel Plated Hose I.D. Length Wrench Flats Weight (lbs.)
Size Brass Diameter
Brass
1/4 25KATF06MPN RF-251-4HB 1/4 2.81 0.99 0.81 0.26
1/4 25KATF10MPN RF-251-6HB 3/8 2.81 0.99 0.81 0.27
New Part No.

Nickel Plated Hose I.D. Length Wrench Flats Weight (lbs.)
Size Brass Diameter
Brass
1/4 25KATP06MPN RF-251-4PL 1/4 2.64 0.99 0.81 0.26
1/4 25KATP10MPN RF-251-6PL 3/8 2.78 0.99 0.81 0.27

Minneapolis, MN
A Pneumatics
Body New Part No. Old Part No. Largest

Size Steel Steel Diameter
1/4 25SFIN13SXZ RF-254-4FP 1/4-18 NPTF 1.45 0.72 0.62 0.06
1/4 25SFIN17SXZ RF-254-6FP 3/8-18 NPTF 1.50 0.94 0.81 0.09

1/4 25SFAN13SXZ RF-254-4MP 1/4-18 NPTF 1.60 0.65 0.56 0.05
1/4 25SFAN17SXZ RF-254-6MP 3/8-18 NPTF 1.67 0.75 0.69 0.08

1/4 25SFTF06SXZ RF-254-4HB 1/4 1.66 0.50 0.04
1/4 25SFTF10SXZ RF-254-6HB 3/8 1.66 0.50 0.05

1/4 25SFTP06SXN RF-254-4PL 1/4 1.69 0.50 0.04
1/4 25SFTP10SXN RF-254-6PL 3/8 1.83 0.50 0.05

Minneapolis, MN
TL Series Couplers
Pneumatic Quick Couplings Schrader Twist-Lock Interchange
TL Series Pneumatic Couplers are interchangeable with

Schraders Twist-Lock style couplings. Couplers have brass
A Pneumatics
bodies and steel sleeves. Nipples are constructed of steel.
Features:
• Designed to resist accidental disconnection
• Push-to-connect, twist sleeve 1/8 turn to disconnect
pressure drop
• Air compressors
• Pneumatic tools
• Water
• Grease
• Paint
Performance TL Series Specifications

Twist-Lock Series (1/4" size) Body Size 1/4 1/2
35
30
Locking Device CAM
25 Vacuum Service Not recommended
1/4"
Air Flow in SCFM
20
How To Order
15
TL-251-4FP
10
Port Configuration
FP - Female Pipe
5 MP - Male Pipe
HB - Standard Hose Barb
PL - Push-Lok Hose Barb
0
0 5 10 15 20 Port Size (1/16 of an inch)
Unit
100 PSI Inlet Pressure 1 - Valved Coupler
80 PSI Inlet Pressure 4 - Unvalved Nipple
Body Size
25 - 1/4"
50 - 1/2"
Repair Kits TL Series
Body
Size
1/4 Nitrile 21K
1/2 Nitrile 16K

Minneapolis, MN
TL Series Couplers
Couplers - Female Thread

A Pneumatics
Body Largest
Part No. Thread Size Length Wrench Flats Weight (lbs)
Size Diameter
1/4 TL-251-4FP 1/4-18 NPTF 2.01 1.12 0.75 0.21
1/2 TL-501-6FP 3/8-18 NPTF 2.55 1.50 1.13 0.44
1/2 TL-501-8FP 1/2-14 NPTF 2.78 1.50 1.13 0.44
1/2 TL-501-12FP 3/4-14 NPTF 2.91 1.50 1.13 0.44
Couplers - Male Thread
Body Largest
Size Diameter
1/4 TL-251-4MP 1/4-18 NPTF 2.23 1.12 0.75 0.21
1/4 TL-251-6MP 3/8-18 NPTF 2.26 1.12 0.75 0.22
1/2 TL-501-6MP 3/8-18 NPTF 2.71 1.50 1.13 0.39
1/2 TL-501-8MP 1/2-14 NPTF 2.88 1.50 1.13 0.40
Optional Seal Materials:

suffix W Ethylene Propylene seal material (-65º to + 400º F) (Couplers) TL-251-4FPW
suffix Y Fluorocarbon seal material (-30º to + 400º F) (Couplers) TL-251-4FPY

Minneapolis, MN
TL Series Couplers
Nipples - Female Thread
A Pneumatics
Body Largest
Size Diameter
1/4 TL-254-2FP 1/8-27 NPTF 1.50 0.58 0.50 0.04
1/4 TL-254-4FP 1/4-18 NPTF 1.60 0.72 0.63 0.06
1/2 TL-504-4FP 1/4-18 NPTF 1.90 0.80 0.69 0.12
1/2 TL-504-6FP 3/8-18 NPTF 1.75 0.94 0.81 0.13
Nipples - Male Thread
Body Largest
Size Diameter
1/4 TL-254-2MP 1/8-27 NPTF 1.68 0.58 0.50 0.05
1/4 TL-254-4MP 1/4-18 NPTF 1.72 0.65 0.56 0.06
1/2 TL-504-4MP 1/4-18 NPTF 1.90 0.80 0.69 0.12
1/2 TL-504-6MP 3/8-18 NPTF 1.90 0.80 0.69 0.12
1/2 TL-504-8MP 1/2-14 NPTF 2.06 1.01 0.88 0.16
1/2 TL-504-12MP 3/4-14 NPTF 2.12 1.22 1.06 0.22
Body Largest
Part No. Hose I.D. Length Weight (lbs)
Size Diameter
1/4 TL-254-4HB 1/4 1.83 0.50 0.03
1/4 TL-254-6HB 3/8 1.83 0.50 0.04
1/2 TL-504-4HB 1/4 2.06 0.67 0.07
1/2 TL-504-6HB 3/8 2.06 0.67 0.08
1/2 TL-504-8HB 1/2 2.06 0.67 0.10

Minneapolis, MN
IH Series
Pneumatic Quick Couplings Snap-tite Design
General Purpose Manual Sleeve, Single Shut-off
IH couplers are steel with a cylindrical valve designed

specifically for pneumatic use. When paired with an unvalved/
A Pneumatics
plain H Series nipple, it functions as a durable single shut-off

connection. Standard seal is nitrile.
Features:
• Sizes 1/4” - 3/4”
• Steel body material
• Standard seal material is nitrile with other options available
• Optional sleeve lock helps to prevent accidental
disconnection
• Manually operated sleeve provides secure connection
• Coupler has 360º cylindrical valve contact
• Industrial air lines
• Pneumatic tools
IH Series Working Pressures (psi)

Valved on coupler and unvalved nipple (Single Shut-off)
Body Size 1/4 3/8 1/2 3/4
Steel 6500 4500 4000 3500
NOTE: Pressure ratings were established under static pressure

conditions. Therefore, pressure ratings for any given flow, pressure
surge and/or vibration may vary from these ratings. Burst pressures
listed were taken at the point at which failure rendered the quick dis-
connect inoperative. (Proof pressure equals 1-1/2 times the working
Cylindrical Pneumatic Valve pressure; burst pressure equals 2 times working pressure.)
Performance
CFM FREE AIR AT 17.7 PSIA, 70F
261.43
117.64
130.71
104.58
65.36
26.14
52.29
78.43
39.22
91.50
13.07
10.46
11.76
6.54
3.92
9.15
5.23
7.84
2.61
1.31
30 2.07
20 1.38
10 .69
9 .62
8 .55
7 .48
6 .41
PRESSURE LOSS (PSI)
5 .34
PRESSURE LOSS (BAR)
4 .27
3 .21
2 .14
"
"
"
"
1/4
3/8
1/2
3/4
1.0 .07
.9 .062
.8 .055
.7 .048
.6 .041
.5 .034
.4 .027
.3 .021
.2 .014
.1 .007
.1
.2
7
.5
.8
5
.9
8
.4
.6
.7
6
3
10
1.0
.3
20
MAXIMUM FLOW AT 85 PSI AIR FLOW RATE, LB. PER MIN.

Minneapolis, MN
IH Series
Pneumatic Quick Couplings Snap-tite Design
General Purpose Manual Sleeve, Single Shut-off
IH Series Couplers - Valved
A Pneumatics
Body Largest Wrench Sleeve
Part No. Steel Thread Size Length
Size Diameter Flats Lock
1/4 VIHC4-4F 1/4 -18 NPTF (female) 1.65 1.19 1.00
1/4 VIHC4-4FSL 1/4 -18 NPTF (female) 1.65 1.19 1.00 Y
1/4 VIHC4-4M 1/4 -18 NPT (male) 2.09 1.02 0.88
1/4 VIHC4-4MSL 1/4 -18 NPT (male) 2.09 1.02 0.88 Y
3/8 VIHC6-6FSL 3/8 -18 NPTF (female) 1.90 1.19 1.00 Y
3/8 VIHC6-6M 3/8 -18 NPT (male) 2.19 1.19 1.00
3/8 VIHC6-6MSL 3/8 -18 NPT (male) 2.19 1.19 1.00 Y
H Series Nipples - Unvalved / Plain
Body Largest Wrench

Part No. Steel Thread Size Length
Size Diameter Flats
1/4 PHN4-4F 1/4 -18 NPTF (female) 1.32 0.73 0.88
1/4 PHN4-4M 1/4 -18 NPT (male) 0.78 0.65 0.56
3/8 PHN6-6F 3/8 -18 NPTF (female) 1.52 0.94 0.81
3/8 PHN6-6M 3/8 -18 NPT (male) 0.98 0.80 0.69
1/2 PHN8-8F 1/2 -14 NPTF (female) 1.72 1.15 1.00
1/2 PHN8-8M 1/2 -14 NPTF (male) 1.01 1.02 0.88
3/4 PHN12-12F 3/4 -14 NPT (female) 1.92 1.37 1.19
3/4 PHN12-12M 3/4 -14 NPT (male) 1.14 1.22 1.06

Minneapolis, MN
Tool-Mate Series Couplers (Standard)
Pneumatic Quick Couplings Rectus 25 and Industrial Interchange Styles
Special Purpose Non-marring, push-to-connect sleeve
Tool-Mate Series are light weight and easy to operate with a

non-marring body. Couplers are constructed of Polyamide
A Pneumatics
material with galvanized steel port ends. Springs, balls and pins
are stainless steel and locking fingers are polyacetate. Grey
body color designates standard, non-venting style coupler.
Features:
• Push-to-connect operation, pull sleeve in the direction
of the arrow to release the nipple
• PBH part number (yellow ring) couplers connect with
Industrial Interchange nipples
• PER part number (green ring) couplers connect with
Rectus 25 series nipples
• Pneumatic tools
Performance
Tool-Mate Series Standard (1/4” & 3/8” sizes)
70
Tool Mate Standard Series Specifications
60
Body Size 1/4 3/8
50 Temperature Range 0 to 160º F

3/8" PBH
Vacuum Service Not recommended
Air Flow in SCFM
1/4" PER
40
30 How To Order
PBH - 251 - 4 FP
20
1/4" PBH Port Configuration
FP - Female Pipe
10
MP - Male Pipe
Port Size (1/16 of an inch)
0
4 - 1/4”
0 5 10 15 20
6 - 3/8”
Pressure Drop in PSID 8 - 1/2”
100 PSI Inlet Pressure Unit
1 - Valved Coupler
Body Size
25 - 1/4”
37 - 3/8”
Tool-Mate Series (Non-venting)
PBH - Industrial Interchange
PER - Rectus 25 Interchange

Minneapolis, MN
Tool-Mate Series Couplers (Standard)
Industrial Interchange - Female Pipe Thread
A Pneumatics
Body Largest
Size Diameter
1/4 PBH-251-4FP 1/4-18 NPTF 2.60 1.19 0.67 0.13
1/4 PBH-251-6FP 3/8-18 NPTF 2.67 1.19 0.91 0.15
3/8 PBH-371-4FP 1/4-18 NPTF 2.95 1.38 0.67 0.21
3/8 PBH-371-6FP 3/8-18 NPTF 2.95 1.38 0.83 0.20
3/8 PBH-371-8FP 1/2-14 NPTF 3.17 1.38 0.99 0.22
Industrial Interchange - Male Pipe Thread
Body Largest
Size Diameter
1/4 PBH-251-4MP 1/4-18 NPTF 2.97 1.19 0.67 0.14
1/4 PBH-251-6MP 3/8-18 NPTF 2.99 1.19 0.91 0.19
3/8 PBH-371-6MP 3/8-18 NPTF 3.39 1.38 0.83 0.23
Rectus 25 Interchange - Female Pipe Thread
Body Largest
Size Diameter
1/4 PER-251-4FP 1/4-18 NPTF 2.83 1.25 0.83 0.17
1/4 PER-251-6FP 3/8-18 NPTF 2.83 1.25 0.83 0.15
Rectus 25 Interchange - Male Pipe Thread
Body Largest
Size Diameter
1/4 PER-251-4MP 1/4-18 NPTF 2.36 1.25 0.83 0.19

Minneapolis, MN
Tool-Mate Series Couplers (Exhaust)
Tool-Mate Series are light weight and easy to operate with a

non-marring body. Exhaust style couplers allow disconnection
A Pneumatics
at zero pressure to avoid dangerous hose whip. Couplers are

constructed of Polyamide material with galvanized steel port
ends. Springs, balls and pins are stainless steel and locking
fingers are polyacetate. Black body color designates venting,
exhaust style coupler.
Features:
• Meets ISO 4414 requirements for a controlled pressure
release system
• Push-to-connect operation, two step disconnection as
indicated by the arrows, provides safe venting of downstream
pressure
• PBS part number (yellow ring) couplers connect with
Industrial Interchange nipples
• PES part number (green ring) couplers connect with Rectus
25 series nipples
• Pneumatic tools
Performance
Tool-Mate Series Exhaust (1/4”, 3/8” & 1/2” sizes)
180
Tool Mate Exhaust Series Specifications
160 Body Size 1/4 3/8 1/2
140
Temperature Range 0 to 160º F
120
Vacuum Service Not recommended
1/2" PBS
Air Flow in SCFM
100
80 How To Order
60
PBS - 251 - 4 FP
3/8" PBS
1/4" PES
40 Port Configuration
FP - Female Pipe
20 MP - Male Pipe
1/4" PBS
0 4 - 1/4”
0 5 10 15 20
6 - 3/8”
8 - 1/2”
100 PSI Inlet Pressure 12 - 3/4”
Unit
1 - Valved Coupler
Body Size
25 - 1/4”
37 - 3/8”
50 - 1/2”
Tool-Mate Series (Exhaust)

PBS - Industrial Interchange
PES - Rectus 25 Interchange

Minneapolis, MN
Tool-Mate Series Couplers (Exhaust)
Exhaust Industrial Interchange - Female Pipe Thread
A Pneumatics
Body Largest
Size Diameter
1/4 PBS-251-4FP 1/4-18 NPTF 2.60 1.19 0 .67 0.13
1/4 PBS-251-6FP 3/8-18 NPTF 2.67 1.19 0.91 0.15
3/8 PBS-371-6FP 3/8-18 NPTF 2.95 1.38 0.82 0.20
3/8 PBS-371-8FP 1/2-14 NPTF 3.17 1.38 0.99 0.22
1/2 PBS-501-6FP 3/8-18 NPTF 3.25 1.62 1.18 0.50
1/2 PBS-501-8FP 1/2-14 NPTF 3.36 1.62 1.18 0.50
1/2 PBS-501-12FP 3/4-14 NPTF 3.66 1.62 1.18 0.50
Exhaust Industrial Interchange - Male Pipe Thread
Body Largest
Size Diameter
1/4 PBS-251-4MP 1/4-18 NPTF 2.97 1.19 0.67 0.14
1/4 PBS-251-6MP 3/8-18 NPTF 2.99 1.19 0.91 0.19
3/8 PBS-371-6MP 3/8-18 NPTF 3.39 1.38 0.82 0.23
3/8 PBS-371-8MP 1/2-14 NPTF 3.39 1.38 0.91 0.28
1/2 PBS-501-8MP 1/2-14 NPTF 3.70 1.62 1.18 0.50
Exhaust Rectus 25 Interchange - Female Pipe Thread
Body Largest
Size Diameter
1/4 PES-251-6FP 3/8-18 NPTF 2.83 0.83 0.83 0.15
Exhaust Rectus 25 Interchange - Male Pipe Thread
Body Largest
Size Diameter
1/4 PES-251-4MP 1/4-18 NPTF 2.36 1.25 0.83 0.19

Minneapolis, MN
E-z-mate Series Couplers (Exhaust)
Special Purpose Push-to-connect sleeve
E-z-mate Series are exhaust type quick couplers that are

designed to safely relieve air pressure prior to disconnection.
A Pneumatics
When the valve sleeve is twisted to shut off air flow, it

automatically vents downstream allowing for disconnection at
zero pressure and eliminating the risk of “hose whip”.
Features:
• Self- locking valve sleeve protects against accidental
disconnection
• Meets ISO 4414 requirements for a controlled pressure
release system
• Connection and disconnection at zero pressure
• Brass material option - contact QCD for availability

• Pneumatic tools
Performance • Drop-down air lines
E-z-mate Series (1/4" & 3/8" sizes)
80
Operation
70
3/8" Parker E-z-mate couplings combine push-to-connect,
60 exhaust-style action with a self-locking valve sleeve to guard
against accidental disconnection. Simply follow the direction
of the On-Off arrow stamped on the valve sleeve. It’s that easy.
Air Flow in SCFM
50
40 100 PSI Inlet Pressure
To connect, push the nipple into the coupler. The black
30 locking sleeve automatically slides forward securely locking
1/4" the nipple in place. No air is allowed to flow through the
20 coupling at this point. The valve sleeve is then rotated
clockwise (when viewed from the coupler port end) to open
10
flow and automatically engage the sleeve-lock mechanism.
0
0 5 10 15 20 To disconnect, rotate the valve sleeve counter clockwise
(when viewed from the coupler end). The flow of air through
E-z-mate Series (1/2" & 3/4" sizes) the coupling will be shut off and all downstream air is vented
240 to the atmosphere. The locking sleeve may now be retracted
220 and the nipple removed. Lubricate sleeve as part of periodic
200
maintenance to coupler.
3/4"
180
160
Air Flow in SCFM
140 Pressure Drop in PSID
120 100 PSI Inlet Pressure

EZ - 251 - 4 FP
100 Port Configuration
FP - Female Pipe
80
1/2" MP - Male Pipe
60 HB - Standard Hose Barb
PL - Push-Lok Hose Barb
40
20
0
Unit
0 5 10 15 20
1 - Valved Coupler
Body Size
E-z-mate Series Specifications 25 - 1/4"
37 - 3/8"
Body Size 1/4 3/8 1/2 3/4 50 - 1/2"
75 - 3/4"
E-z-mate Series
Locking Device 4 balls 4 balls 6 balls 8 balls
Force required to connect (lbs.) Less than 10

Minneapolis, MN
E-z-mate Series Couplers (Exhaust)
Special Purpose Push-to-connect sleeve
A Pneumatics
Body Largest
Size Diameter
1/4 EZ-251-4FP 1/4-18 NPTF 2.25 1.00 0 .75 0.25
1/4 EZ-251-6FP 3/8-18 NPTF 2.68 1.01 0.88 0.29
3/8 EZ-371-6FP 3/8-18 NPTF 2.53 1.18 0.88 0.38
3/8 EZ-371-8FP 1/2-14 NPTF 3.00 1.30 1.12 0.50
1/2 EZ-501-8FP 1/2-14 NPTF 3.01 1.38 1.12 0.65
1/2 EZ-501-12FP 3/4-14 NPTF 3.44 1.59 1.38 0.70
3/4 EZ-751-12FP 3/4-14 NPTF 3.01 1.57 1.38 0.76
3/4 EZ-751-16FP 1-11 1/2 NPTF 3.52 1.80 1.56 0.92
Body Largest
Size Diameter
1/4 EZ-251-4MP 1/4-18 NPTF 2.85 1.00 0.75 0.30
1/4 EZ-251-6MP 3/8-18 NPTF 2.87 1.00 0.75 0.31
3/8 EZ-371-6MP 3/8-18 NPTF 3.10 1.18 0.88 0.44
1/2 EZ-501-8MP 1/2-14 NPTF 3.62 1.38 1.12 0.73
3/4 EZ-751-12MP 3/4-14 NPTF 4.04 1.57 1.38 0.90
Body Largest
Part No. Hose I.D. Length Wrench Flats Weight (lbs)
Size Diameter
1/4 EZ-251-4HB 1/4 3.20 1.00 0.75 0.28
1/4 EZ-251-6HB 3/8 3.20 1.00 0.75 0.29
3/8 EZ-371-6HB 3/8 3.43 1.18 0.88 0.42
1/2 EZ-501-8HB 1/2 4.06 1.40 1.12 0.70
Body Largest
Part No. Hose I.D. Length Wrench Flats Weight (lbs)
Size Diameter
1/4 EZ-251-4PL 1/4 3.03 1.00 0.75 0.28
1/4 EZ-251-6PL 3/8 3.18 1.00 0.75 0.29
3/8 EZ-371-6PL 3/8 3.38 1.18 0.88 0.42
1/2 EZ-501-8PL 1/2 3.91 1.38 1.12 0.70
Minneapolis, MN
GF Series
Pneumatic Quick Couplings Natural & Propane Gas
Special Purpose Safety fuse nipple
GF/GF-1 Series couplings are valved on the coupler half and will
automatically shut off gas flow when coupling is disconnected and
A Pneumatics
automatically open on connection. They also incorporate a safety

fuse in the nipple that will shut off the gas supply to your application in
the event temperatures exceed 350°F.
Features:
• Superior flow capacity
• 0.5 psi max pressure rating (25 psi max pressure rating on
3/4” body size only)
• 1/4”- 1-1/4” size range
• Certified to ANSI Z21-41-2011, CSA 6.9-2011 for use
with natural, manufactured and mixed gases, liquefied
petroleum gases and LP gas-air mixtures
• On-site CSA certified lab and qualified inspection personnel
• Fusible link internal to the nipple protects against
gas-fed fires
®
• Small Gas Appliances
GF Specifications
Body Size 1/4 3/8 1/2 3/4 1 1-1/4
Flow Capac-
ity*
24,300 Btu/hr 50,000 Btu/hr 99,600 Btu/hr 212,000 Btu/hr 378,000 Btu/hr 475,000 Btu/hr
Temperature Range: Standard GF/GF-1 (indoor use) temperature range: 32°F to 200°F. Contact QCD for low temperature version
(outdoor use) temperature range; -40°F to 200°F
*Based on a 1000 Btu per cubic foot gas with a specific gravity of 0.64 at a pressure drop of 0.3 in. w.c.
Couplers
Body Part Number Connected Largest Wrench Weight

Port End Length
Size Brass Length Diameter Flats (lbs)
1/4 BVGFC4-4F 1/4-18 NPTF 1.64 2.41 0.96 0.88 0.194
3/8 BVGFC6-6F 3/8-18 NPTF 1.90 2.69 1.22 1.00 0.284
1/2 BVGF-1C8-8F 1/2-14 NPTF 2.47 3.39 1.42 1.00 0.326
3/4 BVGF-1C12-12F 3/4-14 NPTF 2.51 3.48 1.66 1.31 0.534
1 BVGFC16-16F 1-11-1/2 NPTF 2.69 3.91 2.03 1.88 1.150
1-1/4 BVGFC20-20F 1-1/4-11-1/2 NPTF 3.54 4.88 2.25 2.00 1.568
Nipples
Body Part Number Connected Largest Wrench Weight

Port End Length
Size Brass Length Diameter Flats (lbs)
1/4 BPGFN4-4F 1/4-18 NPTF 1.32 2.41 0.69 0.62 0.052
3/8 BPGFN6-6F 3/8-18 NPTF 1.52 2.69 0.91 0.81 0.105
1/2 BPGF-1N8-8F 1/2-14 NPTF 1.55 3.39 1.13 1.00 0.154
3/4 BPGF-1N12-12F 3/4-14 NPTF 1.79 3.48 1.34 1.19 0.212
1 BPGFN16-16F 1-11-1/2 NPTF 2.10 3.91 1.65 1.50 0.380
1-1/4 BPGFN20-20F 1-1/4-11-1/2 NPTF 2.22 4.88 2.06 1.88 0.576
Minneapolis, MN
Hydraulic Quick Couplings
Double Shut-Off and Straight-Thru Rated Pressure
Couplings
Rated pressure for the Parker hydraulic couplings range from
Parker hydraulic couplings have a wide variety of designs, 30 to 15,000 psi, depending on the coupling series, size
each tailored to a particular application or use. This catalog is and materials. Rated pressures as shown in this catalog are
arranged according to those categories. In each section the defined by ISO 5598, as “the qualified operating pressures
construction of a specific design will be detailed. However, which are recommended for a component or a system by
based on the valving of the coupling, hydraulic couplings the manufacturer.” Parker “Rated Pressures” have been
B Hydraulics
generally fall into one of two groups, either Double Shut-Off or established on the basis of laboratory tests which include,
Straight-Thru. but are not limited to, static burst tests and multiple cycle
Double Shut-Off couplings are used extensively when it is impulse tests. System characteristics such as high cycling
important to minimize fluid loss upon disconnection. Both rates and high amplitude shocks either hydraulic or
halves of the coupler, the body and the nipple, contain shut- mechanical, can reduce the functioning life of a coupling,
off valves. These valves open automatically when the body and even if the system’s nominal pressure falls within the rated
nipple are connected, and close automatically when the two pressure range of the coupling.
halves are disconnected—keeping fluid loss to a minimum. For assistance in analyzing your application, contact your
Parker Straight-Thru couplings have no valves in either half nearest Parker sales office or the Quick Coupling Division
and are ideal for maximum flow application. Their smooth, in Minneapolis.
open bore offers the lowest pressure drop of any quick Refer to the Safety Guide at the end of this catalog for
disconnect coupling, and allows them to be thoroughly considerations when selecting a Quick Coupling.
cleaned. Since there are no valves in either half, fluid flow
Refer to the Fluid Compatibility Chart (note Table of Contents)
should be shut off before the coupling is disconnected.
for seal selection assistance for both Double Shut-Off and
Straight-Thru couplings.
Checklist for Selecting Quick Couplings

q What are the functional requirements of the coupling?
q What is the maximum working pressure of the application?
q Which seals and body material are compatible with the system’s fluid?
q Is the application static or dynamic?
q What size coupler is required?
q What is the maximum pressure drop suitable for the application?
q Does the application require the ability to connect and disconnect under pressure?
q What is the media temperature and ambient temperature?
q What end configurations are required?
q Is an industry interchange coupler required?
q Is air inclusion and fluid loss a concern in the application?
B-1 Parker Hannifin Corporation

Minneapolis, MN
Table of Contents
Introduction.............................................................................. B-1 Connect Under Pressure Couplings
Coupling Selection & Ordering Guide.............................B-4, 5, 98 59 Series........................................................................ B-59
Couplers....................................................................... B-60
General Purpose Couplings
Nipples......................................................................... B-60
60 Series............................................................................... B-6
FET Series.......................................................................B-61
Couplers........................................................................... B-8
Couplers....................................................................... B-62
Nipples............................................................................. B-9
Nipples......................................................................... B-63
60 Series Steam.................................................................. B-12
6100 Series..................................................................... B-65
Couplers......................................................................... B-12
Couplers.................................................................... B-66
Nipples........................................................................... B-12
Nipples.......................................................................B-67
6600 Series......................................................................... B-13
B Hydraulics
8200 Series.................................................................... B-68

Couplers......................................................................... B-14
Couplers.................................................................... B-69
Nipples........................................................................... B-14
H & PH Series...................................................................... B-16 Nipples...................................................................... B-69
H Couplers..................................................................... B-19 9200 Series.................................................................... B-70
H Nipples........................................................................ B-22 Couplers.....................................................................B-71
PH Couplers................................................................... B-21 Nipples.......................................................................B-71
PH Nipples..................................................................... B-25 5000 Series.....................................................................B-72
EA Series............................................................................ B-26 Couplers.....................................................................B-73
Couplers......................................................................... B-28 Nipples.......................................................................B-73
Nipples........................................................................... B-29 75 Series.........................................................................B-74
SM Series........................................................................... B-30 Couplers....................................................................... B-76
Couplers......................................................................... B-31 Nipples......................................................................... B-76
Nipples........................................................................... B-31 High Pressure Couplings
HP Series............................................................................ B-33 71 Series........................................................................ B-77
Couplers......................................................................... B-34 Couplers....................................................................... B-79
Nipples........................................................................... B-34 Nipples......................................................................... B-80
4000 Series......................................................................... B-35 3000 Series.....................................................................B-81
Couplers......................................................................... B-36 Couplers.................................................................... B-82
Nipples........................................................................... B-36 Nipples...................................................................... B-82
4200 Series......................................................................... B-38 TC Series........................................................................ B-83
Couplers......................................................................... B-39 Couplers.................................................................... B-83
Nipples........................................................................... B-39 Nipples...................................................................... B-83
Non-Spill Couplings 1141 Series..................................................................... B-84
NS Series............................................................................ B-40 Couplers.................................................................... B-84
Couplers......................................................................... B-41 Nipples...................................................................... B-84
Nipples........................................................................... B-41
High Flow Couplings
NSS Series.......................................................................... B-42
ST Series....................................................................... B-85
Couplers......................................................................... B-43
Couplers.................................................................... B-86
Nipples........................................................................... B-44
Nipples.......................................................................B-87
FF/FC Series....................................................................... B-46
1163 Series..................................................................... B-88
Couplers......................................................................... B-47
Couplers.................................................................... B-88
Nipples........................................................................... B-47
FC Nipples...................................................................... B-49 Nipples...................................................................... B-88
FEM/FEC Series................................................................ B-50 HO Series....................................................................... B-89
Couplers...................................................................... B-51 Couplers.................................................................... B-89
Nipples........................................................................ B-52 Nipples...................................................................... B-89
FEC Nipples................................................................. B-53 Mold Coolant Line Couplings
FH Series......................................................................... B-54 Moldmate Series............................................................. B-90
Couplers...................................................................... B-55 Couplers.....................................................................B-91
Nipples........................................................................ B-55 Sub Assemblies & Replacement Parts.......................... B-92
FS Series.......................................................................... B-56 Nipples...................................................................... B-94
Couplers...................................................................... B-57
Miniature
Nipples........................................................................ B-57
DM Series...................................................................... B-96
Couplers.....................................................................B-97
Nipples.......................................................................B-97

Minneapolis, MN
Table of Contents
SensoControl Diagnostic and Industrial Catalog........... B-99
Diagnostic Test Port Couplings..................................... B-99
Test Port Couplings.................................................B-100
PD Series.................................................................B-100
Dust Cap...............................................................B-100
Couplers...............................................................B-101
Nipples.................................................................B-101
PDP Series...............................................................B-104
Dust Cap...............................................................B-104
Couplers...............................................................B-105
B Hydraulics
Nipples.................................................................B-105
EMA3 Series............................................................B-106
Nipples.................................................................B-107
Gauge Adapters & Union........................................B-107
Transducer Adapters..............................................B-108
Flexible Hose.........................................................B-108
PDFS Series - Fluid Sampling...................................B-109
Couplers...............................................................B-109
Nipples.................................................................B-109
Probe....................................................................B-109
Promotional Products-Keychains.............................B-111

Minneapolis, MN
Hydraulic Coupling Selection Guide
Body Material Std Seal Std Seal Temp Rated Coupling
Valving Style Locking
Sizes (in.) A B S S3 S6 HP TP Material* Range Pressure Series
Style
General Purpose
1/8 to 2-1/2 Poppet n n n n Ball Nitrile -40° to +250° F 800-5000 psi 60 Series
Ethylene 60 Series
1/4 to 1 Poppet n Ball
Propylene
-65° to +400° F
(steam)
1/4 to 1 Poppet n Ball Nitrile -40° to +250° F 4000-5000 psi 6600 Series
1/4 to 4 Poppet/Unvalved n n n n Ball Nitrile -40° to +250° F 150 - 11000 psi H Series
1/4 to 3/4 Valved/Unvalved n n n Ball Nitrile -40° to +250° F vacuum - 3000 psi EA Series
1/4 to 3/4 Poppet n Ball Nitrile -40° to +250° F 4500-6000 psi SM Series
1 to 1-1/2 Poppet n Ball Nitrile -40° to +250° F 5000 psi HP Series
B Hydraulics
1/4 to 1 Poppet/Ball n Ball Nitrile -40° to +250° F 3000 psi 4000 Series
3/8 to 1/2 Poppet/Ball n Ball Nitrile -40° to +250° F 3000 psi 4200 Series
Non-Spill
Ethylene
3/8 to 1/2 Flush Face n Ball
Propylene
-70° to +250° F 300 psi NSS Series
3/8 to 1 Flush Face n Ball Nitrile -40° to +250° F 2500 psi NS Series
Nitrile/
1/4 to 1 Flush Face n Ball
Polyurethane
-40° to +250° F 3000-5000 psi FF Series
Nitrile/
1/4 to 1 Flush Face n Ball
Polyurethane
-40° to +250° F 3000-5000 psi FEM Series
1/4 to 1 Flush Face n Ball Fluorocarbon -15° to +400° F 2000 psi FS Series
Non-Spill Connect Under Pressure

Acme Nitrile/
3/8 to 1-1/2 Flush Face n Threads Polyurethane
-40° to +250° F 5000-6000 psi 59 Series
Nitrile/
3/8 to 2 Flush Face n Threads
Polyurethane
-40° to +250° F 5000-6000 psi FET Series
Nitrile/
Polyurethane
-40° to +250° F 3000 psi FC Series
Nitrile/
Polyurethane
-40° to +250° F 3000 psi FEC Series
3/4 to 1-1/2 Flush Face n Threads Nitrile -20° to +200° F 2000-3000 psi 6100 Series
Connect Under Pressure

1/2 Poppet n Ball Nitrile -40° to +250° F 3000 psi 8200 Series
1/2 Poppet n Ball Nitrile -40° to +250° F 3000 psi 9200 Series
1/2 Ball n Threads Nitrile -40° to +250° F 2500 psi 5000 Series
3/4 to 4 Poppet n n Threads Nitrile -40° to +250° F 5000 psi 75 Series
High Pressure
1/4 to 2 Flush Face n n n Ball Nitrile -40° to +250° F 10,000 psi 71 Series
3/8 Flush Face n Ball Nitrile -40° to +250° F 10,000 psi FH Series
1/4 to 3/8 Ball n Threads Polyurethane -22° to +230° F 10,000 psi 3000 Series
3/8 Poppet n Ball Fluorocarbon -15° to +400° F 10,000 psi TC Series
1/4 Poppet n Threads Polyurethane -30° to +180° F 10,000 psi 1141 Series
High Flow
1/8 to 1-1/2 Unvalved n n n Ball Nitrile -40° to +250° F 2500-6700 psi ST Series
1/4 to 1/2 Unvalved n Ball Nitrile -40° to +250° F 10,000-15,000 psi HO Series
3/4 Unvalved n Ball Nitrile -40° to +250° F 200 psi 1163 Series
Mold Coolant
1/4 to 1/2 Valved/Unvalved n Ball Silicone -20° to +400° F 200 psi Moldmate
Miniature
1/8 Poppet n Ball Fluorocarbon -15° to +400° F 250 psi DM Series
Materials: A - Aluminum B - Brass S - Steel S3 - 303 Stainless S6 - 316 Stainless HP - High Pressure Stainless Steel TP - Thermoplastic

Minneapolis, MN
*Seal Material Options
Seal Code Seal Material Optional for the Following Series

W Ethylene Propylene 60, 6600, 4000, 4200, 6100, 5000, 8200, 9200, ST
Y Fluorocarbon 60, 6600, 4000, 4200, 6100, 5000, 8200, 9200, ST, Moldmate
Z Neoprene 60, 6600, 4000, 4200, 6100, 5000, 8200, 9200, ST
E5 Ethylene Propylene SM, HP, NS, FF, FEM, FH, FS, HO

E4 Fluorocarbon SM, HP, NS, FF, FEM, FH, HO
E12 Neoprene SM, HP, NS, FF, FEM, FH, FS, HO
E35 Perfluoroelastomer SM, HP, NS, FF, FEM, FH, FS (Contact QCD)
B Hydraulics
E Ethylene Propylene H, EA, 71, 75
V Fluorocarbon H, EA, 71, 75
Contact QCD for additional seal material options.

Minneapolis, MN
60 Series
Hydraulic Quick Couplings ISO 7241, Series B
General Purpose Manual sleeve, poppet valve
60 Series double shut-off couplings are versatile for use across

a spectrum of hydraulic applications where fluid lines require
connection and disconnection. Couplers and nipples are available in a
wide range of sizes and materials.
Features:
• Accepts ISO 7241-1, Series B compliant nipples
• Poppet valves along with a metal to metal valve stop maintains valve
alignment and prevents flow checking
• Steel, brass, and stainless steel material options
B Hydraulics
• Brass couplers have double O-rings and stainless steel locking

balls
• Steel coupler sleeve and steel nipple body are hardened to be wear
resistant
• Standard end configurations include female pipe and straight
thread ORB
• Optional Sleeve-Lok and alternative seal materials available
• Industrial hydraulic lines
• Food and chemical processing
• Water and coolant lines
• Mobile equipment
• May be used with some gases
General Purpose Specifications

Industry Standard: Parker 60 Series couplings comply with ISO 7241 Series B Standard.
ANSI/ISO Pressure Rating: Dynamic applications with normal to ow Cycle, Non-pulsating Pressure Rating: Applications
L
moderate hydraulic shocks such as general industrial equipment, with lower cycle life and no severe cyclic pressure
hydraulic presses, agricultural equipment, etc. Impulse tested at fluctuations, essentially steady pressure during an
a multiple (125% to 133%) of rated pressure. operating cycle. Typical applications include hydraulic
jacks, mine roof support systems, and high pressure
fluid transfer (pumping water or slurry in oil wells).
Minor pump ripple is considered non-pulsating.
Impulse tested at rated pressure.
Body Size 1/8 1/4 3/8 1/2 3/4 1 1 1/2 2 1/2 1/8 1/4 3/8 1/2 3/4 1 1 1/2 2 1/2
Rated Pressure (psi) Rated Pressure (psi)
Brass 1000 1000 1000 1000 1000 1000 800 800 3000 3700 2700 3500 2200 1500 1500 1200
Stainless 2000 2000 1500 1500 1500 1000 1000 1000 5000 5000 5000 5000 3000 3000 1500 1500
steel
Steel 5000 5000 4000 4000 2500 2000 1000 1000 5000 5000 4000 4000 2500 2000 1500 1500
Steel w/ N/A 5000 4000 4000 3000 3000 N/A N/A 5000 5000 4000 4000 3000 3000 N/A N/A
HD nipple
Seal Temperature Range: Nitrile: -40°F to +250°F (Standard seal for Brass, Steel, & 303 Stainless Steel couplings).
Fluorocarbon: -15°F to +400°F (Standard seal for 316 Stainless Steel couplings).
Other Seal materials: Contact the Division for availability.
acuum Data: 27.4 inches Hg (-0.9 Bar) both connected and disconnected. (1-1/2” and 2-1/2” body size 60 Series couplings are not recommended for
V
service in disconnected mode)
Body Size 1/8 1/4 3/8 1/2 3/4 1 1 1/2 2 1/2

Rated Flow (gpm) .8 3 6 12 28 50 100 200

Minneapolis, MN
60 Series
Performance
60 Series (1/8" & 1/4") 60 Series (3/8" & 1/2")

Test Fluid: Oil - 150 SUS Test Fluid: Oil - 150 SUS
30 40
35
25

30
3/8"
20
25
1/8"
15 20
B Hydraulics
1/4"
15
10 1/2"
10
5
5
0 0
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 0 2 4 6 8 10 12 14 16 18
Flow in USGPM Flow in USGPM
60 Series (3/4" & 1" ) 60 Series (1-1/2" & 2-1/2")

45 140
40 120
35
3/4" 100
Pressure Drop in psid
30
80
25 2-1/2"
1"
20 60
1-1/2"
15 40
10
20
5
0
0 0 50 100 150 200 250 300
0 10 20 30 40 50 60 70 Flow in US gpm
Flow in USGPM

suffix -VA Valve actuator (Nipples) H3-63-VA
suffix -SL Sleeve-Lok (Couplers) H3-62-SL
prefix HD Heavy duty (Steel Nipples) HDH3-63
suffix W Ethylene Propylene seal material (EPR) H3-63W
suffix Y Fluorocarbon seal material H3-62Y
suffix Z Neoprene seal material H3-63Z

Minneapolis, MN
60 Series
Couplers - Brass, Steel, 303 Stainless - Female Thread
Part Part No. Weight Thread Overall Wrench Largest

Body Weight Part No. Weight
No. Type 303
Size (lbs.) Steel (lbs.) (lbs.) Size Length Flats Dia
Brass Stainless**
B Hydraulics
1/8 BH1-60 0.16 H1-62 0.16 SH1-62 0.16 1/8-27 NPTF 1.90 0.68 0.96
1/8 - - H1-62-T4 0.18 SH1-62-T4 0.10 7/16-20 ORB 2.06 0.68 0.96
1/4 BH2-60 0.32 H2-62 0.30 SH2-62 0.30 1/4-18 NPTF 2.26 0.81 1.14
1/4 – - H2-62-T6 0.31 SH2-62-T6 0.31 9/16-18 ORB 2.41 0.81 1.14
3/8 BH3-60 0.43 H3-62 0.40 SH3-62 0.40 3/8-18 NPTF 2.49 0.88 1.40
3/8 – - H3-62-T8 0.51 SH3-62-T8 0.51 3/4-16 ORB 2.75 1.00 1.40
1/2 BH4-60 0.80 H4-62 0.73 SH4-62 0.75 1/2-14 NPTF 2.87 1.12 1.77
1/2 - - H4-62-T10 0.78 SH4-62-T10 0.75 7/8-14 ORB 3.05 1.12 1.77
3/4 BH6-60 1.31 H6-62 1.30 SH6-62 1.31 3/4-14 NPTF 3.56 1.31 2.14
3/4 – - H6-62-T12 1.39 SH6-62-T12 1.34 1-1/16 - 12 ORB 3.56 1.31 2.14
1 BH8-60 1.95 H8-62 1.95 SH8-62 1.95 1 - 11 1/2 NPTF 4.18 1.62 2.52
1 – - H8-62-T16 1.95 SH8-62-T16 1.95 1-5/16 - 12 ORB 4.18 1.62 2.52
Couplers - Brass, Steel, 303 Stainless - Female Thread
Part No.
Body Part No. Weight Part No. Weight Weight Thread Overall Wrench Largest
Type 303 Length Flats Dia
Size Brass (lbs.) Steel (lbs.) (lbs.) Size
Stainless**
1-1/2 BH12-60L 4.58 H12-62L 4.70 SH12-62L 4.68 1-1/4 - 11 1/2 NPTF 4.86 2.38* 3.00
1-1/2 BH12-60N 4.58 H12-62N 4.70 SH12-62N 4.68 1-1/2 - 11 1/2 NPTF 4.86 2.38* 3.00
1-1/2 – 4.61 H12-62-T20 4.72 SH12-62-T20 4.71 1-5/8 - 12 ORB 4.86 2.38* 3.00
1-1/2 – 4.61 H12-62-T24 4.72 SH12-62-T24 4.71 1-7/8 - 12 ORB 4.86 2.38* 3.00
2-1/2 BH2016-60 11.06 H2016-62 10.58 SH2016-62 – 2 - 11 1/2 NPTF 5.57 3.75 4.10
2-1/2 BH2020-60 11.42 H2020-62 10.91 SH2020-62 – 2 1/2 - 8 NPTF 6.04 3.75 4.10
2-1/2 BH2024-60 – H2024-62 – SH2024-62 – 3 - 8 NPTF 6.69 4.00 4.35
* Wrench Flat on 303 Stainless is 2.50 in.
** Prop 65 Warning does not apply to stainless steel part numbers

Minneapolis, MN
60 Series
Couplers and Nipples - 316 Stainless - Female Thread
Coupler Nipple
Body Part No. Weight Thread Overall Wrench Largest Part No. Weight Overall Exposed Wrench Largest
Size Type 316 (lbs.) Size Length Flats Dia Type 316 (lbs.) Length Length* Flats Dia
Stainless** Stainless**
B Hydraulics
1/8 SSH1-62Y 0.15 1/8-27 NPT 1.90 0.68 0.96 SSH1-63Y 0.04 1.26 0.44 0.56 0.65
1/8 SSH1-62Y-T4 0.17 7/16-20 ORB 2.06 0.68 0.96 SSH1-63Y-T4 0.06 1.41 0.59 0.69 0.78
1/4 SSH2-62Y 0.30 1/4-18 NPT 2.26 0.81 1.14 SSH2-63Y 0.08 1.54 0.55 0.75 0.87
1/4 SSH2-62Y-T6 0.31 9/16-18 ORB 2.41 0.81 1.14 SSH2-63Y-T6 0.10 1.69 0.70 0.88 1.01
3/8 SSH3-62Y 0.40 3/8-18 NPT 2.49 0.88 1.40 SSH3-63Y 0.12 1.68 0.54 0.88 1.01
3/8 SSH3-62Y-T8 0.51 3/4-16 ORB 2.75 1.00 1.40 SSH3-63Y-T8 0.14 1.94 0.80 1.00 1.15
1/2 SSH4-62Y 0.76 1/2-14 NPT 2.87 1.12 1.77 SSH4-63Y 0.24 1.94 0.69 1.12 1.30
1/2 SSH4-62Y-T10 0.78 7/8-14 ORB 3.05 1.12 1.77 SSH4-63Y-T10 0.27 2.12 0.87 1.19 1.37
3/4 SSH6-62Y 1.33 3/4-14 NPT 3.56 1.31 2.14 SSH6-63Y 0.46 2.43 0.79 1.38 1.59
3/4 SSH6-62Y-T12 1.40 1-1/16 - 12 ORB 3.56 1.31 2.14 SSH6-63Y-T12 0.50 2.54 0.90 1.34 1.59
1 SSH8-62Y 1.95 1 - 11 1/2 NPT 4.18 1.62 2.52 SSH8-63Y 0.76 2.91 0.99 1.62 1.88
1 SSH8-62Y-T16 1.95 1-5/16 - 12 ORB 4.18 1.62 2.52 SSH8-63Y-T16 0.80 2.91 0.99 1.62 1.88
1-1/2 SSH12-62LY 4.68 1-1/4 - 11 1/2 NPT 4.86 2.38* 3.00 SSH12-63LY – 4.76 2.69 2.38‡ 2.75†
1-1/2 SSH12-62NY 4.68 1-1/2 - 11 1/2 NPT 4.86 2.38* 3.00 SSH12-63NY – 4.76 2.69 2.38‡ 2.75†
1-1/2 SSH12-62Y-T20 4.71 1-5/8 - 12 ORB 4.86 2.38* 3.00 SSH12-63Y-T20 – 4.76 2.69 2.38‡ 2.75†
1-1/2 SSH12-62Y-T24 4.71 1-7/8 - 12 ORB 4.86 2.38* 3.00 SSH12-63Y-T24 - 4.76 2.69 2.38‡ 2.75†
2-1/2 SSH2016-62Y – 2 - 11 1/2 NPT 5.57 3.75 4.10 SSH2016-63Y – 5.48 2.90 3.75 4.10
2-1/2 SSH2020-62Y – 2 1/2 - 8 NPT 6.04 3.75 4.10 SSH2020-63Y – 5.95 3.37 3.75 4.10
2-1/2 SSH2024-62Y – 3 - 8 NPT 6.69 4.00 4.35 SSH2024-63Y – 6.87 4.29 4.00 4.35
* This dimension represents the portion that is exposed when the nipple is inserted into the mating Parker Coupler.

Minneapolis, MN
60 Series
Nipples - Brass, Steel, 303 Stainless - Female Thread
Part No.
Body Part No. Weight Part No. Weight Weight Thread Overall Exposed Wrench Largest
Type 303
Size Brass (lbs.) Steel (lbs.) (lbs.) Size Length Length* Flats Dia
Stainless**
B Hydraulics
1/8 BH1-61 0.04 H1-63 0.03 SH1-63 0.03 1/8-27 NPTF 1.26 0.44 0.56 0.65
1/8 - 0.06 H1-63-T4 0.05 SH1-63-T4 - 7/16-20 ORB 1.41 0.59 0.69 0.78
1/4 BH2-61 0.09 H2-63 0.08 SH2-63 0.08 1/4-18 NPTF 1.54 0.55 0.75 0.87
1/4 – 0.11 H2-63-T6 0.10 SH2-63-T6 0.10 9/16-18 ORB 1.69 0.70 0.88 1.01
3/8 BH3-61 0.10 H3-63 0.12 SH3-63 0.12 3/8-18 NPTF 1.68 0.54 0.88 1.01
3/8 – 0.12 H3-63-T8 0.16 SH3-63-T8 0.16 3/4-16 ORB 1.94 0.80 1.00 1.15
1/2 BH4-61 0.25 H4-63 0.24 SH4-63 0.24 1/2-14 NPTF 1.94 0.69 1.12 1.30
1/2 - 0.28 H4-63-T10 0.27 SH4-63-T10 0.27 7/8-14 ORB 2.12 0.87 1.19 1.37
3/4 BH6-61 0.50 H6-63 0.46 SH6-63 0.45 3/4-14 NPTF 2.43 0.79 1.38 1.59
3/4 – 0.55 H6-63-T12 0.46 SH6-63-T12 0.50 1-1/16 - 12 ORB 2.54 0.90 1.34 1.59
1 BH8-61 0.76 H8-63 0.76 SH8-63 0.76 1 - 11 1/2 NPTF 2.91 0.99 1.62 1.88
1 – 0.80 H8-63-T16 0.80 SH8-63-T16 0.80 1-5/16 - 12 ORB 2.91 0.99 1.62 1.88
Nipples - Brass, Steel, 303 Stainless - Female Thread
Part No.
Body Part No. Weight Part No. Weight Weight Thread Overall Exposed Wrench Largest
Type 303
Size Brass (lbs.) Steel (lbs.) (lbs.) Size Length Length* Flats Dia
Stainless**
1-1/2 BH12-61L 2.96 H12-63L 3.10 SH12-63L 3.06 1-1/4 - 11 1/2 NPTF 4.76 2.69 2.38‡ 2.75†
1-1/2 BH12-61N 2.96 H12-63N 3.10 SH12-63N 3.06 1-1/2 - 11 1/2 NPTF 4.76 2.69 2.38‡ 2.75†
1-1/2 – - H12-63-T20 3.15 SH12-63-T20 3.14 1-5/8 - 12 ORB 4.76 2.69 2.38‡ 2.75†
1-1/2 – - H12-63-T24 3.15 SH12-63-T24 3.14 1-7/8 - 12 ORB 4.76 2.69 2.38‡ 2.75†
2-1/2 BH2016-61 7.78 H2016-63 7.90 SH2016-63 7.92 2 - 11 1/2 NPTF 5.48 2.90 3.75 4.10
2-1/2 BH2020-61 8.12 H2020-63 8.16 SH2020-63 8.16 2-1/2 - 8 NPTF 5.95 3.37 3.75 4.10
2-1/2 BH2024-61 – H2024-63 – SH2024-63 – 3 - 8 NPTF 6.87 4.29 4.00 4.35
† Largest diameter on Brass is 2.96” across Hex Corners
‡ Hex on 303 Stainless is 2.50 in.

Minneapolis, MN
60 Series
Replacement Parts Repair Kits

60 Series Couplers Couplers Nipples
Body Body Repair Kit Used for Repair Kit Used for
O-Rings - Nitrile Back-Up Rings
Size Size Part No. Part No. Part No. Part No.
1/8 50001-013-0010 H67A-28 3/8 H67E-62K H3-62 H67E-63K H3-63
1/4 50001-015-0010 H67C-28 3/8 BH67E-60K BH3-60 BH67E-61K BH3-61
3/8 50001-116-0010 4118007 3/8 SH67E-62K SH3-62 SH67E-63K SH3-63
1/2 50001-213-0010 4128002 3/8 SSH67E-62KY SSH3-62Y SSH67E-63KY SSH3-63Y
B Hydraulics
3/4 50001-218-0010 4148001 1/2 H67F-62K H4-62 H67F-63K H4-63
1 50001-222-0010 4158001 1/2 BH67F-60K BH4-60 BH67F-61K BH4-61
1-1/2 50001-124-0010 (Valve) 1/2 SH67F-62K SH4-62 SH67F-63K SH4-63
1-1/2 50001-138-0260 (Fitting) 1/2 SSH67F-62KY SSH4-62Y SSH67F-63KY SSH4-63Y
1-1/2 50001-224-0010 (Body 2 req.) 3/4 H67G-62K H6-62 H67G-63K H6-63
2-1/2 50001-133-0010 (Valve) 3/4 BH67G-60K BH6-60 BH67G-61K BH6-61
2-1/2 50001-234-0260 (Fitting) 3/4 SH67G-62K SH6-62 SH67G-63K SH6-63
2-1/2 50001-333-0010 (Body) 3/4 SSH67G-62KY SSH6-62Y SSH67G-63KY SSH6-63Y
1 H67J-62K H8-62 H67J-63K H8-63
1 BH67J-60K BH8-60 BH67J-61K BH8-61
1 SH67J-62K SH8-62 SH67J-63K SH8-63
1 SSH67J-62KY SSH8-62Y SSH67J-63KY SSH8-63Y
60 Series Dust Plugs and Caps
Body Coupler Dust Plug Coupler Dust Plug Nipple Dust Cap Nipple Dust Cap
Size Aluminum Rubber Aluminum Rubber
1/8 H1-65 H1-65M H1-66 H1-66M
1/4 H2-65 H2-65M H2-66 H2-66M
3/8 H3-65 H3-65M H3-66 H3-66M
1/2 H4-65 H4-65M H4-66 H4-66M
3/4 H6-65 H6-65M H6-66 H6-66M
1 H8-65 H8-65M H8-66 H8-66M
1-1/2 H12-65 - H12-66 -
2-1/2 H20P-65 - H20P-66 -

Minneapolis, MN
60 Series (Steam)
General Purpose Manual sleeve, EP seal
60 Series Steam couplings are brass with stainless steel locking balls
and ethylene propylene seals to withstand temperatures up to 400 F.
1/4 to 1 inch body sizes. 3/8 inch
size couplers have a grip-ring sleeve.
Features:
• Accepts ISO 7241-1, Series B compliant nipples

• Poppet valves along with a metal to metal valve stop maintains
valve alignment and prevents flow checking
• Brass couplers have double O-rings and stainless steel locking
B Hydraulics
balls
• Standard end configuration is female pipe thread
Applications:
• Steam systems
• Cleaning equipment
Specifications Repair Kits - Steam Coupling

Body Size 1/4 to 1 Body Size Repair Kit Part No. Used for Part No.
Standard Seal Material Ethylene Propylene 3/8 H68E-67K H3-68
Temperature Range up to +400° 3/8 H69E-67K H3-69
H3-68 has grip-ring sleeve
Body Part No.

Thread Size Length Largest Diameter Wrench Flats Weight (lbs.)
Size Brass
1/4 BH2-60-STM 1/4-18 NPTF 2.26 1.14 0.81 0.30
3/8* H3-68 3/8-18 NPTF 2.50 1.77 0.88 0.50
1/2 BH4-60-STM 1/2-14 NPTF 2.87 1.77 1.12 0.75
3/4 BH6-60-STM 3/4-14 NPTF 3.56 2.14 1.31 1.31
1 BH8-60-STM 1-11 1/2 NPTF 4.18 2.52 1.62 1.95
* See Photo for 3/8 inch size coupler configuration.
Body Part No. Overall Exposed* Largest Wrench Weight

Thread Size
Size Brass Length Length Diameter Flats (lbs.)
1/4 BH2-61-STM 1/4 - 18 NPTF 1.54 0.65 0.87 0.75 0.08
3/8 H3-69 3/8 - 18 NPTF 1.68 0.52 1.01 0.88 0.13
1/2 BH4-61-STM 1/2 - 14 NPTF 1.94 0.69 1.30 1.12 0.24
3/4 BH6-61-STM 3/4 - 14 NPTF 2.43 0.79 1.59 1.38 0.46
1 BH8-61-STM 1 - 11 1/2 NPTF 2.91 0.99 1.88 1.62 0.76

Minneapolis, MN
6600 Series
Hydraulic Quick Couplings ISO 7241 Series A
The 6600 Series are versatile for use in a wide range of hydraulic
applications where fluid lines require connection and disconnection
for equipment operation or maintenance
Features:
• Accepts ISO 7241-1, Series A compliant nipples
• Poppet valves and a metal perch to maintain valve alignment and
prevent flow checking
• Coupler sleeve and nipple body are hardened to be damage
resistant
B Hydraulics
thread ORB
• Protective zinc plating with clear trivalent
chromate finish
• Truck trailer connections
• Mobile applications
• Attachments
6600 Series Specifications:

Body Size Rated Flow (gpm) Rated Pressure (psi) Temperature Body Material Sleeve Type Seal Material
1/4 0.8 5000
3/8 6 4000
1/2 12 4000 -40° F to +250° F Steel Manual Connect Nitrile
3/4 28 4000
1 50 4000
Performance:
6600 Series (1/4") 6600 Series (3/8"& 1/2")
25
45
40
20 35
30
1/2"
15 25
1/4" 3/8"
20
10
15
10
5
5
0
0 0 2 4 6 8 10 12 14 16 18
0 0.2 0.4 0.6 0.8 1 1.2
Flow in USGPM
Flow in USGPM 6600 Series (3/4" & 1")
Test Fluid: Oil - 150 SUS
50
45
40
35
1"
30
3/4"
25
20
15
10
0
0 10 20 30 40 50 60 70
Flow in USGPM

Minneapolis, MN
6600 Series
Hydraulic Quick Couplings ISO 7241 Series A
6600 Series Couplers
Body Coupler Largest

Port End Valve Type Length Wrench Flats Weight (lbs.)
Size Part Number Diameter
1/4 6601-2-4 1/8-27 NPTF Poppet 1.85 1.08 0.88 0.27
B Hydraulics
1/4 6601-4-4 1/4-18 NPTF Poppet 1.85 1.08 0.88 0.26

3/8 6601-6-6 3/8-18 NPTF Poppet 2.18 1.27 1.06 0.39
3/8 6608-6-6 9/16-18 ORB Poppet 2.18 1.27 1.06 0.38
1/2 6601-8-10 1/2-14 NPTF Poppet 2.75 1.52 1.25 0.67
1/2 6601-12-10 3/4-14 NPTF Poppet 2.88 1.52 1.38 0.71
1/2 6608-8-10 3/4-16 ORB Poppet 2.74 1.52 1.25 0.67
1/2 6608-10-10 7/8 -14 ORB Poppet 2.79 1.52 1.25 0.64
1/2 6608-12-10 1 1/16-12 ORB Poppet 3.01 1.52 1.38 0.77
3/4 6601-12-12 3/4 -14 NPTF Poppet 3.36 1.90 1.62 1.31
3/4 6608-12-12 1 1/16-12 ORB Poppet 3.35 1.90 1.62 1.31
1 6601-16-16 1-11 1/2 NPTF Poppet 4.11 2.14 1.88 1.93
1 6608-16-16 1 5/16-12 ORB Poppet 4.11 2.14 1.88 1.75
6600 Series Nipples
Body Nipple Exposed Largest Wrench Weight

Port End Valve Type Length
Size Part Number Length* Diameter Flats (lbs.)
1/4 6602-2-4 1/8-27 NPTF Poppet 1.41 0.50 0.65 0.56 0.05
1/4 6602-4-4 1/4-18 NPTF Poppet 1.41 0.58 0.87 0.75 0.07
3/8 6602-6-6 3/8-18 NPTF Poppet 1.63 0.72 1.01 0.88 0.11
3/8 6610-6-6 9/16-18 ORB Poppet 1.63 0.72 1.01 0.88 0.13
1/2 6602-8-10 1/2-14 NPTF Poppet 2.08 0.78 1.23 1.06 0.21
1/2 6602-12-10 3/4-14 NPTF Poppet 2.30 0.78 1.59 1.38 0.33
1/2 6610-8-10 3/4-16 ORB Poppet 2.08 0.76 1.23 1.06 0.22
1/2 6610-10-10 7/8-14 ORB Poppet 2.08 0.82 1.30 1.12 0.21
1/2 6610-12-10 1 1/16 -12 ORB Poppet 2.30 1.04 1.59 1.38 0.33
3/4 6602-12-12 3/4-14 NPTF Poppet 2.55 1.18 1.59 1.38 0.49
3/4 6610-12-12 1 1/16-12 ORB Poppet 2.55 1.18 1.59 1.38 0.47
1 6602-16-16 1-11 1/2 NPTF Poppet 3.10 1.34 1.88 1.62 0.75
1 6610-16-16 1-5/16-12 ORB Poppet 3.10 1.34 2.17 1.62 0.72
* This dimension represents the portion of the nipple that is exposed when the nipple and coupler are connected.
6600 Series Replacement Parts 1/4 3/8 1/2 3/4 1
O-Rings - Nitrile 50001-112-0010 50001-115-0010 50001-211-0010 50001-123-0010 50001-126-0010

Back-up Rings 4118006 4118005 50-140-4 4138001 4148002

Minneapolis, MN
6600 Series
Hydraulic Quick Couplings ISO 7241, Series A
6600 Series Dust Caps and Plugs
Body Weight
Dust Plug (Coupler) Color/Material Dust Cap (Nipple)
Size (lbs.)
1/4 H1-65M Black Rubber H1-66M .02
B Hydraulics
3/8 TR-37 Black Rubber TR-37 .04
1/2 5205-4M Black Rubber 5209-4M .04
3/4 6659-12M Black Rubber 6657-12M .06
1 6659-16M Black Rubber 6657-16M .08

suffix -SL Sleeve-Lok (Couplers) 6601-6-6-SL
suffix W Ethylene Propylene seal material (EPR) 6601-6-6W
suffix Y Fluorocarbon seal material 6601-6-6Y
suffix Z Neoprene seal material 6601-6-6Z

Minneapolis, MN
H & PH Series
Hydraulic Quick Couplings Snap-tite Design
General Purpose Manual Sleeve, Valved or Unvalved
H Series, original Snap-tite design couplings have been proven

by years of use on hydraulic applications.
H Series is best suited for general purpose fluid applications
where either single or double shut-off valving is desired. A wide
range of sizes, materials and end configurations are available.
PH version couplers and nipples are valved with a connect-
under-pressure feature. These steel couplers and nipples allow
connection with H Series valved couplers and nipples when
there is a residual pressure on the PH coupler/nipple side. It is
recommended that only one half of the connection (coupler or
B Hydraulics
nipple) be PH version, not both.
Features:
• Sizes 1/4” - 4”
• Available in steel, brass, aluminum and 316 stainless steel
• Standard seal material is nitrile with other options available
• Optional sleeve lock helps to prevent accidental disconnection
Applications include: • Double-shut-off version has low pressure drop
• Industrial hydraulic lines • Manually operated sleeve provides secure connection
• Water and coolant lines • Designed to MIL-C 51234
Ball Bearing
Two -Piece Body Postive Ball-Lock Sleeve Lock
Construction Design
O-Ring and Back-Up
Jet Stream
Valve Design Hardened Localized Poppet Has Non-Shift Wide Choice
Sleeve Induction Metal-to-Metal Valve of End-Fittings
Hardened Stop
PH Series Version
Land
H Series Version Connect Under Pressure

Poppet Valve Poppet Valve
H & PH Series Working Pressures (psi)

Valved on both coupler and nipple (Double Shut-off)
Valved on one half and Unvalved/Plain on other half (Single Shut-off)
Body Size 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
Steel 6500 4500 4000 3500 2000 1750 1500 1500 1000 750 500
Aluminum 2250 2250 1750 1750 1500 375 375 300 300 200 150
Brass 2250 2250 2000 2000 1750 350 350 400 400 200 150
Stainless Steel 5000 4000 3750 2000 2000 1500 1500 500 400 400 300
Unvalved/Plain on both coupler and nipple (Straight Through)
Steel 11000 11000 11000 9000 6000 5000 5000 4000 1000 750 500
Aluminum 4000 4000 4000 3500 3000 1000 1000 750 300 200 150
Brass 4000 4000 4000 3500 3000 1000 1000 750 300 200 150
Stainless Steel 10000 8000 8000 7000 4000 3000 3000 1000 400 400 300
NOTE: Pressure ratings were established under static pressure conditions. Therefore, pressure ratings for any given flow, pressure surge and/or vibration may vary
from these ratings. Burst pressures listed were taken at the point at which failure rendered the quick disconnect inoperative. (Proof pressure equals 1-1/2 times the
working pressure; burst pressure equals 2 times working pressure.)

Minneapolis, MN
H & PH Series
Performance
PH Series H Series
Valved and Valved (Double Shut-Off) Valved and Valved (Double Shut-Off)
Valved and Valved (Double Shut-off) Valved and Valved (Double Shut-off)
Flow Rate (LPM) Flow Rate
FLOW RATE(LPM)
(LPM)
FLOW RATE (LPM)
2649.50
3028.00
3406.50
3785.00
1892.50
2271.00
1514.00
1135.50
1135.50
265.00
302.80
340.70
378.50
265.00
340.70
757.00
302.80
189.30
378.50
757.00
227.10
227.10
189.30
151.40
113.60
151.40
113.60
26.50
34.07
30.28
26.50
75.70
30.28
37.85
34.07
75.70
18.93
22.71
37.85
18.93
22.71
15.14
11.36
15.14
11.36
3.79
7.57
3.79
7.57
300 20.69 300 20.69
B Hydraulics
200 13.79
200 13.79
100 6.90
100 6.90 90 6.21
90 6.21 80 5.52
80 5.52 70 4.83
70 4.83 4.14
60
60 4.14
50 3.45
50 3.45
PRES S URE LO S S ( BAR )

Pressure Loss (PSI)
PR ES S UR E LO S S (PS I)
Pressure Loss (bar)

40 2.76
Loss (PSI)
Pressure Loss (bar)

40 2.76
P R ESSU R E L O SS ( P SI)
P R E SSU R E L O SS ( B A R )
30 2.07
30 2.07
20 1.38
20 1.38
/4"
/2"
"
"
"
"
1/4
3/4
3/8
1/2
1"
"
2"
1-1
"
1-1
Pressure
"
3/4
1/2
3/8
1"
10 .69
9 .62
10 .69 8 .55
9 .62 7 .48
8 .55
7 6 .41
.48
6 .41 5 .34
5 .34 4 .27
4 .27
3 .21
3 .21
2 .14
2 .14
1 .07
1
400
200
300
700
800
900
60
20
500
600
70
80
50
5
90
40
4
1000
9
2
8
3
30
100
7
10
1 .07
1
300
200
30
20
80
40
70
90
5
FLOW RATE (GPM)

50
6
8
9
60
7
4
2
100
10
Flow Rate
(MiL-H-6083 OIL (GPM)
@ 90°F ± 5°F)
FLOW RATE (GPM)
Flow Rate
(MiL-H-6083 OIL @(GPM)
90°F ± 5°F) (MIL-H-6083 oil @ 90°F ± 5°F)
(MIL-H-6083 oil @ 90°F ± 5°F)
Valved and Plain (Single Shut-off)

Repair Kits Valved and Plain (Single Shut-off)
Flow Rate
FLOW RATE(LPM)
(LPM)
S V H C 6 - SPK
2649.50
3028.00
3406.50
3785.00
1892.50
2271.00
1514.00
1135.50
340.70
265.00
302.80
378.50
757.00
227.10
189.30
151.40
113.60
26.50
30.28
75.70
34.07
37.85
22.71
18.93
15.14
11.36
3.79
7.57
300 20.69
Seals:
13.79
Blank = Nitrile (Code A) 200
V = Fluorocarbon
E = Ethylene Propylene 100
90
6.90
6.21
80 5.52
Spare Parts/Repair Kits 70
60
4.83
4.14
50 3.45
Coupling Body Size:
PRESSURE
(PSI)
(PSI)
40 2.76
Pressure
6 = 3/8" 2.07
L OSS
30
8 = 1/2"
Loss
LOSLoss
20 1.38
12 = 3/4"
PRESSU RE
/4"
/2"
Pressure
"
S (BAR)(bar)
"
"
"
16 = 1"
1/4
3/4
3/8
1/2
2"
1"
1-1
1-1
Coupling Half:
10 .69
9 .62
8 .55
C = Coupler 7
6
.48
.41
N = Nipple 5 .34
4 .27
Series: 3 .21
H = Poppet valve or plain/unvalved
PH1 = Poppet valve with pressure relief feature
2 .14
Type: 1 .07
V = Valved
1
200
700
400
600
300
800
900
500
40
50
20
30
90
60
70
80
2
1000
3
8
9
4
100
10
Material: Flow
FLOW RATE (GPM)
Rate
(MIL-H-6083 OIL(GPM)
@ 90°F ± 5°F)
Blank = Steel, clear trivalent plating (MIL-H-6083 oil @ 90°F ± 5°F)
A = Aluminum, clear anodized
B = Brass
S = 316 Stainless Steel
Repair kits include valve spring, valve stop and valve.

O-ring installed on 3/8” to 1”. 1/4” unit is non-field repairable.
Note: Not all configurations are standard product of-

fering. Contact QCD for price and delivery.

Minneapolis, MN
H & PH Series
Valve Options Replacement Coupler Interface Seals

H Series PH Series Body
Hydraulic Coupler/Nipple Hydraulic Coupler/Nipple Nitrile Fluorocarbon
Size
Valve • Poppet Valve • Connect-Under-Pressure
• Unvalved/Plain Poppet Valve
1/4 H4-56-9 H4-56-9V
Styles:
3/8 H6-56-9 H6-56-9V
Connection • Double Shut-off • Double Shut-off
Types: • Single Shut-off (connects with valved 1/2 H8-56-9 H8-56-9V
• Straight Through/Unvalved H Series Coupler or Nipple)
3/4 H12-56-9 H12-56-9V
1 H16-56-9 H16-56-9V
B Hydraulics
Body Sizes: 1/8” - 4” 3/8” - 1” 1-1/4 H20-56-9 H20-56-9V
Materials: • Steel • Steel

• 316 Stainless Steel
Replacement Valve Seals
• Aluminum
Body Ethylene
• Brass Nitrile Fluorocarbon
Size Propylene
Ordering Guide 1-1/4 H20-55A H20-55V H20-55E

1-1/2 H24-55A H24-55V H24-55E
S V H C 4 - 4 F 2 H32-55A H32-55V H32-55E
Sleeve Lock Option:
SL = Helps to prevent
accidental disconnection
Seals:
Blank = Nitrile (Code A)
JF = Military variation of Nitrile
for hydrocarbon fuels
M = Military variation of Nitrile
for MIL-H-5606 fluids
V = Fluorocarbon
E = Ethylene Propylene
End Fitting Type:
M = Male NPT 49 = MS33649 Female
F = Female NPTF2 56 = MS33656 37° Male Flare
EF = Female SAE 57 = MS33657 Bulkhead
EM = Male SAE 37° Flare 14 = MS33514 Male
EB = Bulkhead SAE 15 = MS33515 Bulkhead
RP = Female British
Parallel BS2779
End Fitting Size:
2 = 1/8" 20 = 1-1/4"
4 = 1/4" 24 = 1-1/2"
6 = 3/8" 32 = 2"
8 = 1/2" 40 = 2-1/2"
12 = 3/4" 48 = 3"
16 = 1" 64 = 4"
Coupling Body Size:
4 = 1/4" 24 = 1-1/2"
6 = 3/8" 32 = 2"
8 = 1/2" 40 = 2-1/2"
12 = 3/4" 48 = 3"
16 = 1" 64 = 4"
20 = 1-1/4"
Coupling Half:
C = Coupler
N = Nipple
Series:
H = Poppet valve or plain/unvalved
PH1 = Poppet valve with pressure relief feature 1
PH Valve option recommended on one side, not both.
Type: Available in steel only.
V = Valved 2
For sizes up to 1” NPTF threads in steel.
P = Plain (without valve) For sizes up to 1” NPSF threads in stainless steel.
Material: For sizes over 1” NPT threads.
Blank = Steel, clear trivalent plating
B = Brass Note: Not all configurations are standard product offering.
S = 316 Stainless Steel Contact QCD for price and delivery.

Minneapolis, MN
H & PH Series
H Series Couplers (Aluminum, Brass, Steel) - Female Thread
Part Part Part Valved or

Body Length Largest Wrench
Number Number Number Non-Valved Port End
Size (in) Diameter Flats
Aluminum Brass Steel (Plain)
1/4 - - VHC4-2F Valved 1/8-27 NPTF 1.65 1.00 0.88
B Hydraulics
1/4 APHC4-4F BPHC4-4F PHC4-4F Non-Valved 1/4-18 NPTF 1.34 1.02 0.88
1/4 AVHC4-4F BVHC4-4F VHC4-4F Valved 1/4-18 NPTF 1.65 1.19 1.00
1/4 - - VHC4-4EF Valved 7/16-20 UNF 1.80 1.02 0.88
3/8 APHC6-6F BPHC6-6F PHC6-6F Non-Valved 3/8-18 NPTF 1.50 1.19 1.00
3/8 - - VHC6-6EF Valved 9/16-18 UNF 2.20 1.19 1.00
1/2 - BPHC8-8F PHC8-8F Non-Valved 1/2-14 NPTF 1.62 1.39 1.19
1/2 - - VHC8-8EF Valved 3/4-16 UNF 2.19 1.39 1.19
3/4 - BPHC12-12F PHC12-12F Non-Valved 3/4-14 NPTF 1.91 1.73 1.50
3/4 - BVHC12-12F VHC12-12F Valved 3/4-14 NPTF 2.42 1.73 1.50
3/4 - - VHC12-12EFV Valved 1-1/16 - 12 UNF 2.92 1.73 1.50
1 - BPHC16-16F PHC16-16F Non-Valved 1 - 11-1/2 NPTF 2.07 2.17 1.88
1 - BVHC16-16F VHC16-16F Valved 1 - 11-1/2 NPTF 2.67 2.17 1.88
1 - - VHC16-16EF Valved 1-5/16 - 12 UNF 2.94 2.17 1.88
1-1/4 - BPHC20-20F PHC20-20F Non-Valved 1-1/4 - 11-1/2 NPT 2.28 2.31 2.00
1-1/4 - BVHC20-20F VHC20-20F Valved 1-1/4 - 11-1/2 NPT 3.54 2.31 2.00
1-1/2 - BPHC24-24F PHC24-24F Non-Valved 1-1/2 - 11-1/2 NPT 2.57 2.89 2.50
1-1/2 - BVHC24-24F VHC24-24F Valved 1-1/2 - 11-1/2 NPT 3.27 3.18 2.75
2 - BPHC32-32F PHC32-32F Non-Valved 2 - 11-1/2 NPT 2.48 3.75 3.25
2 - BVHC32-32F VHC32-32F Valved 2 - 11-1/2 NPT 3.92 4.33 3.75

Minneapolis, MN
H & PH Series
H Series Couplers (316 Stainless Steel) - Female Thread
Part Valved or
Body Largest Wrench
Number Non-Valved Port End Length (in)
Size Diameter Flats
Stainless Steel** (Plain)
B Hydraulics
1/4 SVHC4-2F Valved 1/8-27 NPSF* 1.65 1.00 0.88

1/4 SPHC4-4F Non-Valved 1/4-18 NPSF* 1.34 1.02 0.88
1 SPHC16-16F Non-Valved 1 - 11-1/2 NPSF* 2.07 2.17 1.88
1 SVHC16-16F Valved 1 - 11-1/2 NPSF* 2.67 2.17 1.88
1-1/4 SPHC20-20F Non-Valved 1-1/4 - 11-1/2 NPT 2.28 2.31 2.00
1-1/4 SVHC20-20F Valved 1-1/4 - 11-1/2 NPT 3.54 2.31 2.00
1-1/2 SPHC24-24F Non-Valved 1-1/4 - 11-1/2 NPT 2.57 2.89 2.50
1-1/2 SVHC24-24F Valved 1-1/2 - 11-1/2 NPT 3.27 3.18 2.75
2 SPHC32-32F Non-Valved 2 - 11-1/2 NPT 2.48 3.75 3.25
2 SVHC32-32F Valved 2 - 11-1/2 NPT 3.92 4.33 3.75
*NPSF thread may be substituted with equivalent NPT thread

H Series Couplers (Aluminum, Brass, Steel) - Male Thread

1/4 - - VHC4-2M Valved 1/8-27 NPT 1.90 1.00 0.88
1/4 AVHC4-4M BVHC4-4M VHC4-4M Valved 1/4-18 NPT 2.09 1.02 0.88
3/8 AVHC6-6M - VHC6-6M Valved 3/8-18 NPT 2.19 1.19 1.00
3/8 - BVHC6-6M - Valved 3/8-18 NPT 2.19 1.19 1.00
1/2 - BVHC8-8M - Valved 1/2-14 NPT 2.57 1.39 1.19
1/2 - - VHC8-8M Valved 1/2-14 NPT 2.46 1.39 1.19
3/4 - BVHC12-12M VHC12-12M Valved 3/4-14 NPT 2.88 1.73 1.50
1 - BVHC16-16M VHC16-16M Valved 1-11-1/2 NPT 3.21 2.17 1.88
2 - - VHC32-32M Valved 2-11-1/2 NPT 4.54 4.33 3.75

Minneapolis, MN
H & PH Series
H Series Couplers (316 Stainless Steel) - Male Thread
Valved or
Body Part Largest Wrench
Non-Valved Port End Length (in)
Size Number* Diameter Flats
(Plain)
B Hydraulics
1/4 SVHC4-4M Valved 1/4-18 NPT 2.09 1.02 0.88
3/8 SVHC6-6M Valved 3/8-18 NPT 2.19 1.19 1.00
1/2 SVHC8-8M Valved 1/2-14 NPT 2.57 1.39 1.19
3/4 SVHC12-12M Valved 3/4-14 NPT 2.88 1.73 1.50
1 SVHC16-16M Valved 1 - 11-1/2 NPT 3.21 2.17 1.88
* Prop 65 Warning does not apply to stainless steel part numbers
H Series Couplers (Steel) - Male SAE 37 Degree Flare
Valved or
Size Number Diameter Flats
(Plain)
1/4 VHC4-4EM Valved 7/16-20 UNF 2.80 1.02 0.88
3/8 VHC6-6EM Valved 9/16-18 UNF 2.24 1.19 1.00
1/2 VHC8-8EM Valved 3/4-16 UNF 2.46 1.39 1.19
3/4 VHC12-12EM Valved 1-1/6 - 12 UNF 3.05 1.73 1.50
PH Series Connect-Under-Pressure Couplers (Steel) - Female Thread
Valved or
(Plain)
3/8 VPHC6-6F Valved 3/8-18 NPTF 1.90 1.19 1.00
3/4 VPHC12-12EF Valved 1-1/16 - 12 UNF 2.92 1.73 1.50

Minneapolis, MN
H & PH Series
H Series Nipples (Aluminum, Brass, Steel) - Female Thread

B Hydraulics
1/4 - BPHN4-2F PHN4-2F Non-Valved 1/8-27 NPTF 1.11 0.62 0.56

1/4 - - VHN4-2F Valved 1/8-27 NPTF 1.59 1.00 0.88
1/4 APHN4-4F BPHN4-4F - Non-Valved 1/4-18 NPTF 1.32 0.73 0.88
1/4 AVHN4-4F BVHN4-4F - Valved 1/4-18 NPTF 1.59 1.02 0.88
1/4 - - PHN4-4F Non-Valved 1/4-18 NPTF 1.32 0.73 0.63
1/4 - - VHN4-4F Valved 1/4-18 NPTF 1.65 1.19 1.00
3/8 APHN6-6F BPHN6-6F - Non-Valved 3/8-18 NPTF 1.52 0.94 1.00
3/8 - - PHN6-6F Non-Valved 3/8-18 NPTF 1.52 0.94 0.81
3/8 AVHN6-6F BVHN6-6F VHN6-6F Valved 3/8-18 NPTF 1.84 1.19 1.00
1/2 AVHN8-8F - - Valved 1/2-14 NPTF 1.98 1.19 1.00
1/2 - BVHN8-8F VHN8-8F Valved 1/2-14 NPTF 1.98 1.39 1.19
1/2 - - VHN8-8EF Valved 3/4-16 UNF 2.08 1.39 1.19
3/4 - BVHN12-12F VHN12-12F Valved 3/4-14 NPTF 2.29 1.73 1.50
3/4 - - VHN12-12EF Valved 1-1/16 - 12 UNF 2.79 1.73 1.50
1 - BPHN16-16F PHN16-16F Non-Valved 1 - 11-1/2 NPTF 2.10 1.73 1.50
1 - BVHN16-16F VHN16-16F Valved 1 - 11-1/2 NPTF 2.55 2.17 1.88
1 - - VHN16-16EF Valved 1-5/16 - 12 UNF 2.82 2.17 1.88
1-1/4 - BPHN20-20F PHN20-20F Non-Valved 1-1/4 - 11-1/2 NPTF 2.22 2.17 1.88
1-1/4 - BVHN20-20F VHN20-20F Valved 1-1/4 - 11-1/2 NPTF 3.41 2.31 2.00
1-1/2 - BPHN24-24F PHN24-24F Non-Valved 1-1/2 - 11-1/2 NPTF 2.44 2.46 2.13
1-1/2 - BVHN24-24F VHN24-24F Valved 1-1/2 - 11-1/2 NPTF 3.11 3.18 2.75
2 - BPHN32-32F PHN32-32F Non-Valved 2 - 11-1/2 NPTF 2.60 3.18 2.75
2 - BVHN32-32F VHN32-32F Valved 2 - 11-1/2 NPTF 3.72 4.33 3.75

Minneapolis, MN
H & PH Series
H Series Nipples (316 Stainless Steel) - Female Thread
Valved or
(Plain)
B Hydraulics
1/4 SPHN4-2F Non-Valved 1/8-27 NPSF* 1.11 0.62 0.56
1/4 SVHN4-2F Valved 1/8-27 NPSF* 1.59 1.00 0.56
1 SPHN16-16F Non-Valved 1 - 11-1/2 NPSF* 2.10 1.73 1.50
1 SVHN16-16F Valved 1 - 11-1/2 NPSF* 2.55 2.17 1.88
1-1/4 SPHN20-20F Non-Valved 1-1/4 - 11-1/2 NPTF 2.22 2.17 1.88
1-1/4 SVHN20-20F Valved 1-1/4 - 11-1/2 NPTF 3.41 2.31 1.88
1-1/2 SPHN24-24F Non-Valved 1-1/2 - 11-1/2 NPTF 2.44 2.46 2.13
1-1/2 SVHN24-24F Valved 1-1/2 - 11-1/2 NPTF 3.11 3.18 3.75
2 SPHN32-32F Non-Valved 2 - 11-1/2 NPTF 2.60 3.18 2.75
2 SVHN32-32F Valved 2 - 11-1/2 NPTF 3.72 4.33 3.75
*NPSF thread may be substituted with equivalent NPT thread

Minneapolis, MN
H & PH Series
H Series Nipples (Aluminum, Brass, Steel) - Male Thread

B Hydraulics
1/4 - BPHN4-2M - Non-Valved 1/8-27 NPT 1.22 0.64 0.56

1/4 - - PHN4-2M Non-Valved 1/8-27 NPT 1.11 0.62 0.56
1/4 - - VHN4-2M Valved 1/8-27 NPT 1.85 1.00 0.88
1/4 APHN4-4M BPHN4-4M PHN4-4M Non-Valved 1/4-18 NPT 0.78 0.65 0.56
1/4 AVHN4-4M BVHN4-4M VHN4-4M Valved 1/4-18 NPT 2.03 1.02 0.88
3/8 - BPHN6-6M PHN6-6M Non-Valved 3/8-18 NPT 0.98 0.80 0.69
3/8 AVHN6-6M BVHN6-6M VHN6-6M Valved 3/8-18 NPT 2.13 1.19 1.00
1/2 - BVHN8-8M VHN8-8M Valved 1/2-14 NPT 2.46 1.39 1.19
3/4 - BVHN12-12M VHN12-12M Valved 3/4-14 NPT 2.75 1.73 1.50
1 - BPHN16-16M - Non-Valved 1 - 11-1/2 NPT 1.16 1.59 1.38
1 - - PHN16-16M Non-Valved 1-11-1/2 NPT 1.16 1.73 1.88
1 - BVHN16-16M VHN16-16M Valved 1 - 11-1/2 NPT 3.09 2.17 1.88
1-1/4 - - VHN20-20M Valved 1-1/4 - 11-1/2 NPT 3.46 2.31 2.00
2 - - PHN32-32M Non-Valved 2 - 11-1/2 NPT 2.03 2.89 2.50
H Series Nipples (316 Stainless Steel) - Male Thread
Valved or
Size Number* Diameter Flats
(Plain)
1/4 SPHN4-2M Non-Valved 1/8-27 NPT 1.22 0.64 0.56
1/4 SVHN4-4M Valved 1/4-18 NPT 2.03 1.02 0.88
3/8 SVHN6-6M Valved 3/8-18 NPT 2.13 1.19 1.00
1/2 SVHN8-8M Valved 1/2-14 NPT 2.46 1.39 1.19
3/4 SVHN12-12M Valved 3/4-14 NPT 2.75 1.73 1.50
1 SVHN16-16M Valved 1 - 11-1/2 NPT 3.09 2.17 1.80
1-1/4 SVHN20-20M Valved 1-1/4 - 11-1/2 NPT 3.46 2.31 2.00

Minneapolis, MN
H & PH Series
H Series Nipples (Steel) - Male SAE 37 Degree Flare
Valved or
(Plain)
B Hydraulics
1/4 VHN4-4EM Valved 7/16-20 UNF 2.02 1.02 0.88
3/8 VHN6-6EM Valved 9/16-18 UNF 2.24 1.19 1.00
1/2 VHN8-8EM Valved 3/4-16 UNF 2.35 1.39 1.19
3/4 VHN12-12EM Valved 1-1/6 - 12 UNF 2.92 1.73 1.50
PH Series Connect-Under-Pressure Nipples (Steel)
Valved or
(Plain)
1/2 VPHN8-8F Valved 1/2-14 NPTF (Female) 1.98 1.39 1.19
1/2 VPHN8-8EM Valved 3/4-16 UNF (Male) 2.35 1.39 1.19
H Series Dust Plugs and Caps
Body Coupler Dust Plug Coupler Dust Plug Nipple Dust Cap Nipple Dust Cap Nipple Pressure
Size Plastic Aluminum Plastic Aluminum Cap
1/4 PDP-4 AMPH-4 PDC-4 ADCH-4 MCH-4
1 PDP-16 AMPH-16 PDC-16 ADCH-16 MCH-16
1-1/4 - AMPH-20 - ADCH-20 MCH-20
1-1/2 - AMPH-24 - ADCH-24 MCH-24
2 - AMPH-32 - ADCH-32 MCH-32
2-1/2 - AMPH-40 - ADCH-40 MCH-40
3 - AMPH-48 - ADCH-48 MCH-48
WARNING: This product can expose you to chemicals including Lead and DEHP, which is known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Minneapolis, MN
EA Series
Hydraulic Quick Couplings Vacuum Couplings
General Purpose Vacuum to Medium Pressure
EA Series couplings are designed specifically for vacuum and

meduim pressure service, providing a dependable means for
speeding fluid line changeover in autoclave applications. Single and
double shut off combinations.
Features:
• Vacuum capability
• Available in a variety of materials
• Wide range of sizes
B Hydraulics
• Nitrile is standard seal material, other options available
• Aircraft fabrication
• Plastic molding
• Horizontal boring and dewatering
EA Series Specifications
Force to Connect (Double Shut Off) Spillage on Disconnect (Double Shut Off)
Body
Size Internal Force to With 10 psi Internal With 50 psi Pressure
Pressure (psi) Connect (lbs) Pressure (cc or ml) (cc or ml))
1/4 200 50 1.2 1.5
3/8 200 60 1.4 2.5
1/2 200 95 4.2 4.6
3/4 100 95 10.5 11.6
EA Series Pressure Ratings

Steel 316 Stainless Steel Brass
Body
Size Maximum Minimum Maximum Minimum Maximum Minimum
Working (psi) Burst (psi) Working (psi) Burst (psi) Working (psi) Burst (psi)
1/4 3000 6000 3000 6000 1500 3000
3/8 3000 6000 3000 6000 1500 3000
1/2 3000 6000 3000 6000 1500 3000
3/4 2000 4000 2000 4000 1500 3000
Pressure ratings were established under static pressure conditions. Therefore, pressure ratings for any given flow, pressure surge and/or vibration
may vary from those ratings.
Vacuum Capability at Standard Barometric Conditions

1/4 3/8 1/2 3/4
in.hg atm in.hg atm in.hg atm in.hg atm
Connected 29.7 .99 29.7 .99 29.7 .99 29.7 .99
Coupler or
Nipple Alone
29.7 .99 29.7 .99 29.7 .99 29.7 .99
(discon-
nected)

Minneapolis, MN
EA Series
Performance
EA Series Valved & Valved EA Series Valved & Plain
(Double Shut-off) (Single Shut-off)
Flow Rate (LPM) Flow Rate (LPM)
265.00
302.80
340.70
378.50
227.10
265.00
189.30
302.80
340.70
378.50
227.10
151.40
189.30
113.60
151.40
113.60
30.28
26.50
75.70
34.07
37.85
22.71
18.93
30.28
26.50
75.70
34.07
37.85
15.14
22.71
11.36
18.93
15.14
11.36
3.79
7.57
3.79
7.57
300 20.69 300 20.69
200 13.79 200 13.79
B Hydraulics
100 6.90 100 6.90
90 6.21 90 6.21
80 5.52 80 5.52
70 4.83 70 4.83
60 4.14 60 4.14
50 3.45 50 3.45
40 2.76 40 2.76
Pressure Loss (bar)

Pressure Loss (bar)
Pressure Loss (psi)

Pressure Loss (psi)
30 2.07 30 2.07
20 1.38 20 1.38
"
"
"
"
"
"
"
"
3/8
1/4
1/4
3/8
3/4
1/2
3/4
1/2
10 .69 10 .69
9 .62 9 .62
8 .55 8 .55
7 .48 7 .48
6 .41 6 .41
5 .34 5 .34
4 .27 4 .27
3 .21 3 .21
2 .14 2 .14
1 .07 1 .07
7
1
20
50
80
30
40
60
70
90
9
2
5
6
100
10
3
8
4
20
50
80
30
40
60
70
90
9
2
7
8
4
5
6
100
10
3
Flow Rate (GPM) Flow Rate (GPM)
(88 ssu (18CSt oil) (88 ssu (18CSt oil)
Repair Kits
EA Series Repair Kits and Replacement Parts S V EA C 8 - SPK
Body
Part Number Description Seal Material Seals:
Size
Blank = Nitrile (Code A)
1/2 VEAC8-SPK Coupler Valve Repair Kit Nitrile V = Fluorocarbon
1/2 VEAN8-SPK Nipple Valve Repair Kit Nitrile E = Ethylene Propylene
Spare Parts/Repair Kits
1/4 EA4-58AS Coupler Interface Seal Aflas
Coupling Body Size:
1/2 EA8-58V Coupler Interface Seal Fluorocarbon 4 = 1/4" 8 = 1/2”
3/4 EA12-58A Coupler Interface Seal Nitrile 6 = 3/8" 12 = 3/4”
Coupling Half:
C = Coupler
N = Nipple
Series:
EA
Type:
V = Valved
P = Plain (without valve)
Material:
Blank = Steel, clear trivalent plating
B = Brass
S = 316 Stainless Steel
Optional Seal Materials for Couplers and Valved Nipples
suffix V Fluorocarbon seal material VEAN4-4FV
suffix E Ethylene Propylene seal material (EPR) VEAC6-6ME
suffix AS Aflas seal material VEAC6-6FAS

Minneapolis, MN
EA Series
EA Series Couplers (Brass, Steel, 316 Stainless Steel) - Female Thread
Part Part Part Number Valved or

Number Number Port End 316 Stainless Port End* Non-Valved
Brass Steel Steel** (Plain)
B Hydraulics
1/4 BPEAC4-4F PEAC4-4F 1/4-18 NPTF SPEAC4-4F 1/4-18 NPSF Non-Valved 1.33 1.13 0.88
1/4 BVEAC4-4F VEAC4-4F 1/4-18 NPTF SVEAC4-4F 1/4-18 NPSF Valved 1.61 1.13 0.88
3/8 BPEAC6-6F PEAC6-6F 3/8-18 NPTF - - Non-Valved 1.58 1.31 1.00
3/8 BVEAC6-6F VEAC6-6F 3/8-18 NPTF - - Valved 1.86 1.31 1.00
1/2 BPEAC8-8F PEAC8-8F 1/2-14 NPTF - - Non-Valved 1.70 1.44 1.19
1/2 BVEAC8-8F VEAC8-8F 1/2-14 NPTF SVEAC8-8F 1/2-14NPSF Valved 2.09 1.44 1.19
3/4 BPEAC12-12F - 3/4-14 NPTF SPEAC12-12F 3/4-14 NPSF Non-Valved 2.41 1.88 1.50
3/4 BVEAC12-12F VEAC12-12F 3/4-14 NPTF SVEAC12-12F 3/4-14 NPSF Valved 2.91 1.88 1.50
EA Series Couplers (Brass, Steel, 316 Stainless Steel) - Male Thread

1/4 - PEAC4-4M 1/4-18 NPTF SPEAC4-4M 1/4-18 NPSF Non-Valved 1.48 1.13 0.88
1/4 - VEAC4-4M 1/4-18 NPTF - 1/4-18 NPSF Valved 2.05 1.13 0.88
3/8 BVEAC6-6M VEAC6-6M 3/8-18 NPTF - - Valved 2.15 1.31 1.00
1/2 BVEAC8-8M VEAC8-8M 1/2-14 NPTF SVEAC8-8M 1/2-14 NPSF Valved 2.46 1.44 1.19
3/4 BVEAC12-12M VEAC12-12M 3/4-14 NPTF - - Valved 2.87 1.88 1.50
*May be substituted with NPT threads
Contact QCD for additional sizes, materials and end configurations.

Minneapolis, MN
EA Series
EA Series Nipples (Brass, Steel, 316 Stainless Steel) - Female Thread

1/4 - - - SVEAN4-2F 1/8-27 NPSF Valved 1.61 1.00 0.88
B Hydraulics
1/4 BPEAN4-4F PEAN4-4F 1/4-18 NPTF SPEAN4-4F 1/4-18 NPSF Non-Valved 1.33 0.73 0.62
1/4 - VEAN4-4F 1/4-18 NPTF SVEAN4-4F 1/4-18 NPSF Valved 1.61 1.00 0.88
3/8 BPEAN6-6F PEAN6-6F 3/8-18 NPTF - - Non-Valved 1.58 0.94 0.81
3/8 BVEAN6-6F VEAN6-6F 3/8-18 NPTF - - Valved 1.86 1.15 1.00
1/2 BPEAN8-8F PEAN8-8F 1/2-14 NPTF - - Non-Valved 1.70 1.15 1.00
1/2 BVEAN8-8F VEAN8-8F 1/2-14 NPTF SVEAN8-8F 1/2-14NPSF Valved 2.09 1.31 1.19
3/4 BPEAN12-12F - 3/4-14 NPTF SPEAN12-12F 3/4-14 NPSF Non-Valved 2.05 1.37 1.19
3/4 BVEAN12-12F VEAN12-12F 3/4-14 NPTF SVEAN12-12F 3/4-14 NPSF Valved 2.29 1.73 1.50
EA Series Nipples (Brass, Steel, 316 Stainless Steel) - Male Thread

1/4 - PEAN4-4M 1/4-18 NPTF SPEAN4-4M 1/4-18 NPSF Non-Valved 1.43 0.65 0.56
1/4 - VEAN4-4M 1/4-18 NPTF SVEAN4-4M 1/4-18 NPSF Valved 2.21 1.02 0.88
3/8 BVEAN6-6M VEAN6-6M 3/8-18 NPTF - - Valved 2.15 1.15 1.00
1/2 BVEAN8-8M VEAN8-8M 1/2-14 NPTF SVEAN8-8M 1/2-14 NPSF Valved 2.46 1.31 1.19
3/4 BVEAN12-12M VEAN12-12M 3/4-14 NPTF - - Valved 2.75 1.65 1.50
*May be substituted with NPT threads
Contact QCD for additional sizes, materials and end configurations.
EA Series Dust Plugs and Caps
Body Coupler Dust Plug Coupler Dust Plug Nipple Dust Cap Nipple Dust Cap Nipple Pressure
Size Plastic Aluminum Plastic Aluminum Cap
1/4 PDP-4 AMPE-4 PDC-4 ADCE-4 MCE-4
WARNING: This product can expose you to chemicals including Lead and DEHP, which is known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Minneapolis, MN
SM Series
Hydraulic Quick Couplings High Pressure
SM Series double shut-off couplings are versatile for use across

a spectrum of hydraulic applications where fluid lines require
connection and disconnection. Couplers and nipples are steel with
nitrile seals and are available in 1/4 through 3/4 inch sizes.
Features:
• Rated pressures up to 6000 psi

• Poppet valves have captive seals to minimize seal washout
• Steel material with standard nitrile seals
• Standard end configurations include female pipe, straight thread
B Hydraulics
ORB, and British pipe

• Alternative seal materials available
Applications:
Specifications
Body Size 1/4 1/2 3/4
Rated Pressure (PSI) 6,000 6,000 4,500
Rated Flow (GPM) 3 12 28
Temperature Range (Nitrile Seals) -40° to +250°F
Performance
SM Series (1/4") SM Series (1/2" & 3/4")
25 35
30
20
25
15
20
1/2"
1/4"
15
10
3/4"
10
5
5
0 0
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 0 5 10 15 20 25 30 35 40

suffix -SL Sleeve-Lok (Couplers) SM-501-8FP-SL
suffix -E5 Ethylene Propylene seal material (EPR) SM-501-8FP-E5
suffix -E4 Fluorocarbon seal material SM-501-8FP-E4
suffix -E12 Neoprene seal material SM-501-8FP-E12

Minneapolis, MN
SM Series
Hydraulic Quick Couplings - High Pressure
Couplers - Female Thread
Body Part Number

Size Steel
1/4 SM-251-4FP 1/4-18 NPTF 2.09 1.06 0.75 0.24
1/4 SM-251-4FB G1/4 BSPP 2.24 1.06 0.75 0.26
B Hydraulics
1/4 SM-251-6FP 3/8-18 NPTF 2.24 1.06 0.94 0.28
1/4 SM-251-6FB G3/8 BSPP 2.24 1.06 0.94 0.26
1/4 SM-251-6FO 9/16-18 ORB 2.24 1.06 0.75 0.25
1/2 SM-501-8FP 1/2-14 NPTF 3.00 1.56 1.25 0.70
1/2 SM-501-8FB G1/2 BSPP 3.00 1.56 1.25 0.74
1/2 SM-501-8FO 3/4-16 ORB 3.16 1.56 1.25 0.70
1/2 SM-501-12FP 3/4-14 NPTF 3.07 1.56 1.37 0.81
1/2 SM-501-12FB G3/4 BSPP 3.16 1.56 1.37 0.85
3/4 SM-751-12FO 1 1/16-12 ORB 3.89 2.22 1.62 1.78
3/4 SM-751-12FP 3/4-14 NPTF 3.77 2.22 1.62 1.83
3/4 SM-751-12FB G3/4 BSPP 3.89 2.22 1.62 1.88
3/4 SM-751-16FP 1-11 1/2 NPTF 3.98 2.22 1.62 1.84
3/4 SM-751-16FB G 1 BSPP 3.98 2.22 1.62 1.89
3/4 SM-751-16FO 1-5/16 - 12 ORB 3.98 2.22 1.62 1.89
Nipple - Female Thread
Body Part Number Exposed* Largest

Size Steel Length Diameter
1/4 SM-252-4FP 1/4-18 NPTF 1.49 0.50 0.87 0.75 0.08
1/4 SM-252-4FB G1/4 BSPP 1.64 0.65 0.87 0.75 0.09
1/4 SM-252-6FP 3/8-18 NPTF 1.64 0.81 1.08 0.94 0.14
1/4 SM-252-6FB G3/8 BSPP 1.64 0.81 1.08 0.94 0.14
1/4 SM-252-6FO 9/16-18 ORB 1.64 0.55 0.87 0.75 0.08
1/2 SM-502-8FO 3/4-16 ORB 2.14 0.72 1.23 1.06 0.16
1/2 SM-502-8FP 1/2-14 NPTF 2.01 0.45 1.23 1.06 0.15
1/2 SM-502-8FB G1/2 BSPP 2.01 0.60 1.23 1.06 0.18
1/2 SM-502-12FP 3/4-14 NPTF 2.31 0.90 1.59 1.37 0.30
1/2 SM-502-12FB G3/4 BSPP 2.63 1.07 1.59 1.37 0.34
3/4 SM-752-12FO 1 1/16-12 ORB 2.60 0.39 1.73 1.50 0.48
3/4 SM-752-12FP 3/4-14 NPTF 2.48 0.39 1.73 1.50 0.52
3/4 SM-752-12FB G3/4 BSPP 2.60 0.53 1.73 1.50 0.56
3/4 SM-752-16FP 1-11 1/2 NPTF 2.69 0.67 1.88 1.62 0.56
3/4 SM-752-16FB G 1 BSPP 2.69 0.67 1.88 1.62 0.68
1-5/16 - 12
3/4 SM-752-16FO 2.69 0.67 1.88 1.62 0.68
ORB

Minneapolis, MN
SM Series
SM Series Dust Caps and Plugs
Body
Nipple Dust Cap Color/Material Coupler Dust Plug
Size
1/4 N/A Plastic PL-25
1/4 CR-25 Black Rubber PR-25
1/4 C-25 Aluminum P-25
B Hydraulics
1/2 DC-50 Black Rubber DP-50

WARNING: This product can expose you to chemicals including DEHP, which is known to the State of California to cause cancer and birth defects or

Minneapolis, MN
HP Series
HP Series double shut-off couplings are designed for pressures up

to 5000 psi. Couplers and nipples are steel with nitrile seals and are
available in 1 and 1-1/2 inch sizes.
Features:

• Smooth flow path with minimal pressure drop
• Heat treated steel nipple and heavy duty sleeve withstand
pressure surges
• Couplings have protective zinc with clear trivalent chromate finish
B Hydraulics
thread ORB
Applications:

Performance HP Series (1" & 1-1/2")

45
Specifications
40
Body Size 1 1 - 1/2
35 Rated Pressure (PSI) 5,000
30 Rated Flow (GPM) 50 100

1-1/2"
25 -40° to +250°F
seals)
1"
20
15
10
0
0 20 40 60 80 100 120 140
Flow in USGPM

suffix -E5 Ethylene Propylene seal material (EPR) HP-1001-16FP-E5
suffix -E4 Fluorocarbon seal material HP-1001-16FP-E4
suffix -E12 Neoprene seal material HP-1001-16FP-E12

Minneapolis, MN
HP Series
Couplers
Body
Part Number Thread Size Length Largest Diameter Wrench Flats Weight (lbs.)
Size
1 HP-1001-16FP 1 11-1/2 NPSF 3.95 2.38 1.62 2.10
B Hydraulics
1 HP-1001-16FO 1 5/16-12 ORB 4.35 2.38 1.62 2.10

1-1/2 HP-1501-24FP 1 1/2-11 1/2 NPTF 4.93 3.00 2.25 4.40
1-1/2 HP-1501-24FO 1 7/8 -12 ORB 4.93 3.00 2.25 4.40
Nipples
Body Overall Exposed* Largest Wrench Weight

Part Number Thread Size
Size Length Length Diameter Flats (lbs.)
1 HP-1002-16FP 1 11-1/2 NPSF 3.00 1.32 1.88 1.62 0.84
1 HP-1002-16FO 1 5/16-12 ORB 3.40 1.72 1.88 1.62 0.84
1 1/2-11 1/2
1-1/2 HP-1502-24FP 4.06 0.99 2.63 2.25 1.85
NPTF
1-1/2 HP-1502-24FO 1 7/8-12 ORB 4.06 0.99 2.63 2.25 1.85
Dust Plugs and Caps
Protective Plugs for Coupler Protective Caps for Nipple
Part Number Material* Fits Coupler Part Number Material* Fits Nipple
HPP-100 Aluminum HP-1001 HPC-100 Aluminum HP-1002
HPP-150 Aluminum HP-1501 HPC-150 Aluminum HP-1502
* Prop 65 Warning does not apply to aluminum.

Minneapolis, MN
Hydraulic Quick Couplings ISO 5675 Nipples (1/2”size)
General Purpose Manual sleeve, poppet/ball valve
The 4000 Series brings to the industry a proven design

for use on agricultural machinery and other rugged applications.
Features:
• 1/2” size accepts ISO 5675 universal tips

• Basic operation where coupler sleeve is manually retracted to
allow connection with male tip
• Critical parts are hardened
• Ball and poppet valve options
B Hydraulics
• Protective zinc plating with clear trivalent
chromate finish
• Hydraulic Loaders
• Add-on hydraulic circuits
• Hydraulic tools

Rated Flow
Body Size Rated Pressure (psi) Temperature Body Material Sleeve Type Seal Material
(gpm)
1/4 3
3/8 6
1/2 12 3000 -40° F to +250° F Steel Manual Connect Nitrile
3/4 28
1 50
Performance:
4000 Series (1/4", 3/8", 1/2") 4000 Series (3/4" & 1")
70 90
80
60
70
50 3/4"
1/2" 60
1/4"
40
50
3/8" 1"
30 40
30
20
20
10
10
0
0
0 2 4 6 8 10 12 14 16 18
0 10 20 30 40 50 60 70
Flow in USGPM
Flow in USGPM

suffix W Ethylene Propylene seal material- EPR 4050-4PW
suffix Y Fluorocarbon seal material 4050-4PY
suffix Z Neoprene seal material 4050-4PZ

Minneapolis, MN
Body Coupler Largest Weight

Port End Valve Type Length Wrench Flats
Size Part Number Diameter (lbs.)
1/4 4050-2P 1/4-18 NPTF Poppet 2.18 1.06 0.88 0.24
B Hydraulics
1/4 4050-2P-T8M 3/4-16 ORB (Male) Poppet 1.80 1.06 0.88 0.21
1/4 4050-T6 9/16-18 ORB Poppet 2.18 1.06 0.88 0.27
1/4 4050P-T6* 9/16-18 ORB Poppet 2.43 1.33 0.88 0.33
3/8 4050-3P 3/8-18 NPTF Poppet 2.31 1.33 0.94 0.51
1/2 4050-4 1/2-14 NPTF Ball 2.60 1.50 1.06 0.58
1/2 4050-4P 1/2-14 NPTF Poppet 2.60 1.50 1.06 0.58
1/2 4050-5 3/4-14 NPTF Ball 2.69 1.50 1.13 0.71
1/2 4050-5P 3/4-14 NPTF Poppet 2.69 1.50 1.13 0.71
1/2 4050-15 3/4-16 ORB Ball 2.81 1.50 1.06 0.64
1/2 4050-15P 3/4-16 ORB Poppet 2.81 1.50 1.06 0.64
1/2 4050-16 7/8-14 ORB Ball 2.75 1.50 1.06 0.59
1/2 4050-16P 7/8-14 ORB Poppet 2.75 1.50 1.06 0.59
1/2 4050-29BSPP 1/2-14 BSPP Ball 2.68 1.50 1.06 0.59
3/4 4150-5 3/4-14 NPTF Ball 3.06 1.87 1.38 1.00
* Special Push/Pull Sleeve
8010 Series Nipples

1/4 4010-2P 1/4-18 NPTF Poppet 1.48 0.71 0.87 0.75 0.08
1/4 4010-T6 9/16-18 ORB Poppet 1.60 0.81 0.87 0.75 0.09
3/8 4010-3P 3/8-18 NPTF Poppet 1.60 0.80 1.08 0.94 0.16
1/2 8010-4 1/2-14 NPTF Ball 1.95 1.09 1.23 1.06 0.20
1/2 8010-4P 1/2-14 NPTF Poppet 1.95 1.09 1.23 1.06 0.20
1/2 8010-5 3/4-14 NPTF Ball 2.14 1.28 1.44 1.25 0.25
1/2 8010-5P 3/4-14 NPTF Poppet 2.14 1.28 1.44 1.25 0.25
1/2 8010-15 3/4-16 ORB Ball 1.95 1.20 1.23 1.06 0.20
1/2 8010-15P 3/4-16 ORB Poppet 1.95 1.20 1.23 1.06 0.20
1/2 8010-16 7/8-14 ORB Ball 1.95 1.18 1.23 1.06 0.25
1/2 8010-16P 7/8-14 ORB Poppet 1.95 1.18 1.23 1.06 0.25
1/2 8010-29BSPP 1/2-14 BSPP Ball 1.95 1.09 1.18 1.06 0.25
3/4 4110-5 3/4-14 NPTF Ball 1.81 1.23 1.52 1.31 0.50
1 4010-6P 1-11 1/2 NPTF Poppet 2.79 1.49 1.88 1.63 0.62

Minneapolis, MN
4050 Series Replacement O-Rings 4000 Series Dust Caps and Plugs
Body Size Material Part Number Durometer
1/4 Nitrile 50001-113-0260 90
3/8 Nitrile 50001-116-0260 90
1/2 Nitrile 50001-211-0260 90
3/4 Nitrile 50001-215-0010 70

Body Dust Plug Dust Cap Weight
Color/Material
Size (Coupler) (Nipple) (lbs.)
1 Nitrile 50001-218-0260 90
B Hydraulics
1/4 5205-2M Black Rubber 5209-2M .02
3/8 5205-3M Black Rubber 5209-3M .03
1/2 5205-4M Black Rubber 5209-4M .04
1/2 5005-4 Steel w/Chain 5009-4 .21
1/2 5205-4M-BU Blue Rubber 5209-4M-BU .04
1/2 5205-4M-GR Green Rubber 5209-4M-GR .04
1/2 5205-4M-RE Red Rubber 5209-4M-RE .04
1/2 5205-4M-YE Yellow Rubber 5209-4M-YE .04
3/4 5205-5M Black Rubber 5209-5M .05
1 5205-6M Black Rubber 5209-6M .06

Minneapolis, MN
General Purpose Push/pull/breakaway sleeve
The 4200 Series brings to the industry a proven design for use on
agricultural machinery, construction equipment, and other rugged
applications where a breakaway feature is desirable.
Features:
1/2” size accepts ISO 5675 universal tips

Grooves in sleeve to accommodate retaining rings for bulkhead
mounting
One-handed push-to-connect operation when coupler is clamp
mounted
B Hydraulics
1/2” body size couplers are compatible with 5001-4 and

5006-4 breakaway clamps
Critical parts are hardened
Ball and poppet valve options
Protective zinc plating with clear trivalent chromate finish
Hydraulic Loaders
Add-on hydraulic circuits
Implement breakaway
Hydraulic tools

3/8 6 Push/pull/
3000 -40° F to +250° F Steel Nitrile
1/2 12 breakaway
Performance: 4200 Series (3/8" & 1/2")

80
70
60
Body Dust Plug Dust Cap Weight
Color/Material
50 Size (Coupler) (Nipple) (lbs.)

1/2"
3/8 5205-3M Black Rubber 5209-3M .03
40
3/8" 1/2 5205-4M Black Rubber 5209-4M .04
30
1/2 5005-4 Steel w/Chain 5009-4 .21
20 1/2 5205-4M-BU Blue Rubber 5209-4M-BU .04
10 1/2 5205-4M-GR Green Rubber 5209-4M-GR .04
0
0 2 4 6 8 10 12 14 16 18 1/2 5205-4M-YE Yellow Rubber 5209-4M-YE .04
Flow in USGPM

suffix W Ethylene Propylene seal material- EPR 4250-4PW
suffix Y Fluorocarbon seal material 4250-4PY
suffix Z Neoprene seal material 4250-4PZ

Minneapolis, MN
General Purpose Push/pull/breakaway sleeve
Body Coupler Largest Weight

3/8 4250-3P 3/8-18 NPTF Poppet 2.31 1.31 0.81 0.39
B Hydraulics
1/2 4250-4 1/2-14 NPTF Ball 2.68 1.50 0.94 0.55
1/2 4250-4P 1/2-14 NPTF Poppet 2.68 1.50 0.94 0.55
1/2 4250-15 3/4-16 ORB Ball 2.68 1.50 0.94 0.55
1/2 4250-15P 3/4-16 ORB Poppet 2.68 1.50 0.94 0.55
8010 Series Nipples
Body Nipple Exposed Largest Weight

Size Part Number Length* Diameter (lbs.)
3/8 4010-3P 3/8-18 NPTF Poppet 1.60 0.80 1.08 0.94 0.16
1/2 8010-4 1/2-14 NPTF Ball 1.95 1.09 1.23 1.06 0.20
1/2 8010-4P 1/2-14 NPTF Poppet 1.95 1.09 1.23 1.06 0.20
1/2 8010-15 3/4-16 ORB Ball 2.06 1.20 1.23 1.06 0.20
1/2 8010-15P 3/4-16 ORB Poppet 2.06 1.20 1.23 1.06 0.20
8010 Series Nipples (Connect Under Pressure)

1/2 8010-4P-DC 1/2-14 NPTF DC Poppet 1.81 1.09 1.06 1.16 0.20
1/2 8010-15P-DC 3/4-16 ORB DC Poppet 1.81 1.09 1.06 1.16 0.20
4250 Series Replacement O-Rings

Body
Material Part Number Durometer
Size
3/8 Nitrile 50001-116-0260 90
1/2 Nitrile 50001-211-0260 90

Minneapolis, MN
NS Series
Hydraulic Quick Couplings Push-to-Connect
Non-Spill Sleeve lock
NS Series non-spill couplings are designed to minimize spillage and air

inclusion when connecting or disconnecting. Couplers and nipples
are steel with nitrile seals. 1/2 inch through 1 inch sizes utilize a PTFE
back-up ring as additional support to the interface seal.
Features:
• Rated pressure up to 2500 psi

• Positive valve stop prevents flow checking
• Heat treated steel nipple and heavy duty sleeve withstand
pressure surges
B Hydraulics
• Standard sleeve lock guards against accidental disconnection

• Couplings have protective zinc with clear trivalent
chromate finish
• Standard end configurations include female pipe, straight thread
ORB, and BSPP
Applications:
• Hydraulic hand tools
• Utility equipment
• Mining equipment
Performance NS Series (3/8"& 1/2")

50
45
Specifications
40 Body Size 3/8 1/2 3/4 1
Rated Pressure (psi) 2,500
35
30 Rated Flow (gpm) 10 12 30 50

25
1/2" Temperature Range (std
-40° to +250°F
20 seals)
3/8"
15 Spillage (ml)
0.020 0.070 0.150 0.220
(max. per disconnect)
10
Air Inclusion (ml)
5 0.010 0.020 0.050 0.070
0
0 2 4 6 8 10 12 14 16 18
Flow in USGPM NS Series Dust Plug/Caps
NS Series (3/4" & 1")

25
Body Size Dust Plug/Cap Rubber
20 3/8 NR-37
1/2 NR-50
1"
15 3/4 NR-75
3/4" 1 NR-100
10
0
0 10 20 30 40 50 60 70
Flow in USGPM

Minneapolis, MN
NS Series
Non-Spill Sleeve lock
NS Series Couplers
Body Part Number

Size Steel
3/8 NS-371-6FP 3/8-18 NPSF 2.10 1.13 1.06 0.36
3/8 NS-371-6FB G3/8 BSPP 2.10 1.13 1.06 0.38
B Hydraulics
3/8 NS-371-8FO 3/4-16UNF 2.20 1.13 1.06 0.40
1/2 NS-501-8FP 1/2-14 NPSF 2.88 1.56 1.25 0.84
1/2 NS-501-8FB G1/2 BSPP 2.95 1.56 1.25 0.74
1/2 NS-501-10FO 7/8-14UNF 2.97 1.56 1.25 0.80
3/4 NS-751-12FP 3/4-14 NPSF 3.19 1.96 1.56 1.48
3/4 NS-751-12FB G3/4 BSPP 3.38 1.96 1.56 1.54
3/4 NS-751-12FO 1 1/16-12UN 3.51 1.96 1.56 1.58
1 NS-1001-16FP 1-11 1/2 NPSF 3.70 2.25 1.75 2.35
1 NS-1001-16FB G 1 BSPP 3.81 2.25 1.75 2.36
1 NS-1001-16FO 1 5/16-12UN 3.81 2.25 1.75 2.36
NS Series Nipples
Body Part Number Thread Overall Exposed* Largest Wrench

Weight (lbs.)
Size Steel Size Length Length Diameter Flats
3/8 NS-372-6FP 3/8-18 NPSF 1.70 1.17 1.08 0.94 0.16
3/8 NS-372-6FB G3/8 BSPP 1.78 1.25 1.08 0.94 0.16
3/8 NS-372-8FO 3/4-16UNF 1.91 1.38 1.23 1.06 0.20
1/2 NS-502-8FP 1/2-14 NPSF 1.81 0.69 1.23 1.06 0.20
1/2 NS-502-8FB G1/2 BSPP 1.95 0.83 1.23 1.06 0.22
1/2 NS-502-10FO 7/8-14UNF 2.14 1.02 1.23 1.06 0.23
3/4 NS-752-12FP 3/4-14 NPSF 2.25 1.12 1.59 1.37 0.48
3/4 NS-752-12FB G3/4 BSPP 2.47 1.34 1.59 1.37 0.54
3/4 NS-752-12FO 1 1/16-12UN 2.62 1.49 1.59 1.37 0.65
1 NS-1002-16FP 1-11 1/2 NSPF 2.64 1.54 1.88 1.62 0.72
1 NS-1002-16FB G 1 BSPP 2.78 1.68 1.88 1.62 0.74
1 NS-1002-16FO 1 5/16-12UN 2.78 1.68 1.88 1.62 0.80
Standard Port Configurations
FP - Female Pipe Thread
FO - Female Straight Thread
FB - Female British Standard Parallel Pipe
Optional Seal Materials (add code to part number):
suffix -E5 Ethylene Propylene seal material (EPR) NS-502-8FP-E5
suffix -E4 Fluorocarbon seal material NS-502-8FP-E4
WARNING: Products listed in these pages can expose you to chemicals including Lead, which is known to the State of California to cause cancer
and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Minneapolis, MN
NSS Series
Non-Spill High Flow, Stainless Steel
NSS couplings deliver high flow rates with excellent flow vs

pressure drop characteristics to maintain optimum system
performance and efficiency. Ideal for high-tech industry
cooling applications, couplers and nipples are 316 stainless
steel with ethylene propylene seals. Their compact body
size and guided alignment save time and frustration when
connecting fluid lines in confined spaces.
Features:
• Non-spill valving ensures minimal fluid loss and low air
inclusion
B Hydraulics
• Corrosion resistant stainless steel construction

• Easy push to connect operation with guided alignment
• High flow and compact size
• Standard end configurations include female straight
thread ORB, Push-Lok® hose barb, A-Lok, bulkhead and
panel mount options
Applications:
• Cooling lines
• Chemical transfer lines
Specifications • High purity systems
Body Size 3/8 1/2 • Lab equipment
Rated Pressure (psi) 2000 300
Rated Flow (gpm) 10 12 3/8" NSS vs 3/8” Instrumentation Coupler
Temperature Range (std Pressure Drop vs Flow
-70° to +250°F
seals) 400
Ethylene Ethylene 350

Standard Seal Material 3/8" Competitive Coupling
Propylene Propylene 300
316 Stainless 316 Stainless 250

Body/Sleeve/Valve Material
Steel Steel 200
3/8" CPI Series
17-7 Stainless 17-7 Stainless
Spring Material 150
Steel Steel
100
303 Stainless 303 Stainless
Locking Ball Material 50
Steel Steel 3/8" NSS Series
0
Spillage (ml) 0 2 4 6 8 10
0.020 0.070
(max. per disconnect) Flow in USGPM
Air Inclusion (ml)
0.010 0.020
3/8” NSS vs 1/2" Instrumentation Coupler 1/2” NSS vs 1/2" Instrumentation Coupler
Pressure Drop vs Flow Pressure Drop vs Flow
200 200
180 180
160 160
1/2" CPI Series 1/2" CPI Series

140 140
120 120
1/2" Competitive Coupling 1/2" Competitive Coupling
100 100
80 80
60 60
3/8" NSS Series with 1/2” port
40 40
20 20
0 1/2" NSS Series
0
0 5 10 15 20 0 5 10 15 20

Minneapolis, MN
NSS Series
NSS Series Couplers - Female Thread

L
Body Largest Diameter

Part Number Thread Size Length (in) Wrench Flats (in) Weight (lbs)
Size (in)
3/8 NSS-371-6FO 9/16 - 18 UNF 2.25 1.13 0.94 0.35
3/8 NSS-371-8FO 3/4 - 16 UNF 2.38 1.13 0.94 0.35
1/2 NSS-501-10FO 7/8 - 14 UNF 2.99 1.40 1.25 0.80
B Hydraulics
1/2 NSS-501-12FO 1 1/16 - 12 UNF 3.10 1.40 1.25 0.80
NSS Series Couplers - Push-Lok® Hose Barb*

L
W
Part Number Hose ID (in) Length** (in) Wrench Flats (in) Weight (lbs)
Size (in)
3/8 NSS-371-6HB 3/8 1.70 1.13 0.94 0.30
3/8 NSS-371-8HB 1/2 1.62 1.13 0.94 0.30
1/2 NSS-501-8HB 1/2 2.23 1.40 1.25 0.80
1/2 NSS-501-12HB 3/4 2.23 1.40 1.25 0.80
** Length is to end of body hex and does not include fitting end.
NSS Series Couplers - A-Lok® Compression Fitting*

L
W2
W1
Body Largest Wrench Flats 1 Wrench Flats 2
Part Number Port End Length* (in) Weight (lbs)
Size Diameter (in) (in) (in)
3/8 NSS-371-6MA 3/8 A-Lok 1.75 1.13 0.94 0.69 0.35
3/8 NSS-371-8MA 1/2 A-Lok 1.67 1.13 0.94 0.88 0.37
1/2 NSS-501-8MA 1/2 A-Lok 2.23 1.40 1.25 0.88 0.80
1/2 NSS-501-12MA 3/4 A-Lok 2.23 1.40 1.25 1.13 0.80
* Length is to end of body hex and does not include fitting end.
NSS Series Couplers - A-Lok® Compression Fitting* / Bulkhead Mount

L W2
W3
W1
Largest Wrench Flats Wrench Flats Wrench Flats
Body Length* Weight
Part Number Port End Diameter 1 2 3
Size (in) (lbs)
(in) (in) (in) (in)
3/8 NSS-371-6BMA 3/8 A-Lok 1.75 1.13 0.94 0.69 0.75 0.40
1/2 NSS-501-8BMA 1/2 A-Lok 2.06 1.40 1.25 0.88 0.94 0.80
1/2 NSS-501-12BMA 3/4 A-Lok 2.23 1.40 1.25 1.13 1.19 0.80

Minneapolis, MN
NSS Series
NSS Series Couplers - A-Lok® Compression Fitting* / Panel Mount

L W3
W2
W1
Body Length* Weight
Size (in) (lbs)
B Hydraulics
(in) (in) (in) (in)

3/8 NSS-371-6HMA 3/8 A-Lok 1.75 1.13 0.94 0.69 0.75 0.40
1/2 NSS-501-8HMA 1/2 A-Lok 2.23 1.40 1.25 0.88 0.94 0.80
1/2 NSS-501-12HMA 3/4 A-Lok 2.23 1.40 1.25 1.13 1.19 0.80
NSS Series Nipples - Female Thread

L
W
Part Number Thread Size Length (in) Wrench Flats (in) Weight (lbs)
Size (in)
3/8 NSS-372-6FO 9/16 - 18 UNF 1.84 1.02 0.94 0.20
3/8 NSS-372-8FO 3/4 - 16 UNF 1.99 1.02 0.94 0.20
1/2 NSS-502-10FO 7/8 - 14 UNF 2.99 1.40 1.25 0.80
1/2 NSS-502-12FO 1 1/16 - 12 UNF 3.11 1.40 1.25 0.80
NSS Series Nipples - Push-Lok® Hose Barb*

L
W
Part Number Hose ID (in) Length** (in) Wrench Flats (in) Weight (lbs)
Size (in)
3/8 NSS-372-6HB 3/8 1.37 1.02 0.94 0.15
3/8 NSS-372-8HB 1/2 1.37 1.02 0.94 0.15
1/2 NSS-502-8HB 1/2 1.38 1.38 1.25 0.25
1/2 NSS-502-12HB 3/4 2.23 1.38 1.25 0.25
** Length is to end of body hex and does not include fitting end.
Code Coupler and Nipple Seal Material Options Part Number Example
suffix N Nitrile - NBR NSS-371-6HMA-N
suffix F Fluorocarbon - FKM NSS-371-6HMA-F
suffix C Neoprene - CR NSS-371-6HMA-C
suffix G GFTL Fluorocarbon - FKM NSS-371-6HMA-G
suffix P Perfluorolastomer - FFKM NSS-371-6HMA-P
suffix L Fluorosilicone - FVQM NSS-371-6HMA-L
suffix D Silicone NSS-371-6HMA-D

Minneapolis, MN
NSS Series
NSS Series Nipples - A-Lok® Compression Fitting*

L
W2
W1
Body Largest Wrench Flats 1 Wrench Flats 2 Weight
Part Number Port End Length* (in)
Size Diameter (in) (in) (in) (lbs)
B Hydraulics
3/8 NSS-372-6MA 3/8 A-Lok 1.39 1.02 0.94 0.69 0.20
3/8 NSS-372-8MA 1/2 A-Lok 1.39 1.02 0.94 0.88 0.22
1/2 NSS-502-8MA 1/2 A-Lok 2.23 1.38 1.25 0.88 0.25
1/2 NSS-502-12MA 3/4 A-Lok 2.23 1.38 1.25 1.13 0.25
NSS Series Nipples - A-Lok® Compression Fitting* / Bulkhead Mount

L
W2
W3
W1
Body Length* Weight
Size (in) (lbs)
(in) (in) (in) (in)
3/8 NSS-372-6BMA 3/8 A-Lok 1.39 1.02 0.94 0.69 0.75 0.25
1/2 NSS-502-8BMA 1/2 A-Lok 1.99 1.38 1.25 0.88 0.94 0.25
1/2 NSS-502-12BMA 3/4 A-Lok 2.23 1.38 1.25 1.13 1.19 0.25
NSS Series Nipples - A-Lok® Compression Fitting* / Panel Mount

L W3 W2
W1
Body Length* Weight
Size (in) (lbs)
(in) (in) (in) (in)
3/8 NSS-372-6HMA 3/8 A-Lok 1.39 1.02 0.94 0.69 0.75 0.25
1/2 NSS-502-8HMA 1/2 A-Lok 2.23 1.38 1.25 0.88 0.94 0.25
1/2 NSS-502-12HMA 3/4 A-Lok 2.23 1.38 1.25 1.13 1.19 0.25

Minneapolis, MN
FF/FC Series
Hydraulic Quick Couplings HTMA (3/8 size)
Non-Spill Push to connect/sleeve lock
FF Series couplings eliminate spillage and air inclusion

when connecting and disconnecting. The sleeve locking
mechanism prevents accidental disconnection. 3/8“ body
size complies with Hydraulic Tool Manufacturers Association
standards. FC nipples provide a connect-under-pressure
option for trapped pressures up to 3000 psi on the nipple side.
Features
• Flush, non-spill valving
• Hardened steel sleeves and nipple bodies
B Hydraulics
• Locking sleeve
• Sleeve-Lok design now standard
• Blow-out resistant seal
• Connect-under-pressure FC nipple option
• Protective zinc nickel plating
• Hydraulic tools
• Industrial hydraulics
Performance FF Series (1/4", 3/8", 1/2") FF Series (3/4" & 1")

25 45
40
20
35
1/2" 30
15 1"
3/8" 25
1/4" 3/4"
20
10
15
5 10
0 0
0 2 4 6 8 10 12 14 16 18 0 10 20 30 40 50 60 70
FF Series Specifications
Air Inclusion (ml)
Body Rated Pres- Rated Flow Temperature Spillage (ml) max. Body Sleeve Seal
max. per con-
Size sure (psi) (gpm) Range per disconnect Material Type Material
nect
1/4 5000 3 .015 .020
3/8 5000 6 .015 .020
Nitrile/
-40º to +250ºF Push to
1/2 3000 12 .080 .070 Steel Polyure-
Connect
thane
3/4 3000 28 .150 .100
1 3000 50 .200 .150

Minneapolis, MN
FF/FC Series
Hydraulic Quick Couplings HTMA (3/8 size)
FF Series Couplers
COUPLED LENGTH = A + B
A = FEMALE B = MALE
EXPOSED LENGTH EXPOSED LENGTH
Body Coupler Coupled Largest Weight

Port End Length Wrench Flats
Size Part Number Length Diameter (lbs.)
B Hydraulics
1/4 FF-251-4FP 1/4-18 NPSF 1.79 1.06 25 mm 0.23
1/4 FF-251-4MP 1/4-18 NPTF 1.84 1.06 25 mm 0.24
1/4 FF-251-6FO 9/16-18 UNF 1.91 1.06 25 mm 0.23
3/8 FEM-371-6FP 3/8-18 NPTF 3.06 5.02 1.26 30 mm 0.77
3/8 FEM-371-8FP 1/2-14 NPTF 3.17 5.23 1.26 30 mm 0.75
3/8 FEM-371-6FB 3/8-19 BSPP 3.06 5.02 1.31 30 mm 0.75
3/8 FEM-371-8FB G1/2 BSPP 3.17 5.23 1.31 30 mm 0.75
3/8 FEM-371-8FO 3/4-16 UNF 3.06 5.02 1.26 30 mm 0.74
1/2 FF-501-8FP 1/2-14 NPSF 3.00 1.54 32 mm 0.88
1/2 FF-501-10FO 7/8-14 UNF 3.00 1.54 32 mm 1.05
3/4 FF-751-12FP 3/4-14 NPSF 3.50 1.94 45 mm 1.84
3/4 FF-751-12FO 1 1/16-12 UNF 3.75 1.94 45 mm 1.93
1 FF-1001-16FP 1-11 1/2NPSF 4.14 2.25 48 mm 2.64
1 FF-1001-16FO 1 5/16-12UNF 4.24 2.25 48 mm 2.68
FF Series Nipples
A = FEMALE B = MALE
Body Nipple Coupled Exposed Largest Wrench Weight

Port End Length
Size Part Number Length Length* Diameter Flats (lbs.)
1/4 FF-252-4FP 1/4-18 NPSF 1.66 1.15 1.06 25 mm 0.16
1/4 FF-252-4MP 1/4-18 NPTF 1.72 1.18 1.06 25 mm 0.26
1/4 FF-252-6FO 9/16-18 UNF 1.66 1.15 1.06 25 mm 0.16
3/8 FEM-372-6FP 3/8-18 NPTF 2.59 5.02 1.26 30 mm 0.48
3/8 FEM-372-8FP 1/2-14 NPSF 2.69 5.23 1.26 30 mm 0.48
3/8 FEM-372-6FB 3/8-19 BSPP 2.59 5.02 1.26 30 mm 0.48
3/8 FEM-372-8FB G1/2 BSPP 2.69 5.22 1.26 30 mm 0.47
3/8 FEM-372-8FO 3/4-16 UNF 2.59 5.02 1.26 30 mm 0.45
1/2 FF-502-8FP 1/2-14 NPSF 2.75 2.11 1.38 32 mm 0.42
1/2 FF-502-10FO 7/8-14 UNF 2.75 2.07 1.38 32 mm 0.44
3/4 FF-752-12FP 3/4-14 NPSF 3.38 2.47 1.73 45 mm 1.00
3/4 FF-752-12FO 1 1/16-12 UNF 3.58 2.47 1.73 45 mm 1.02
1 FF-1002-16FP 1-11 1/2 NPSF 3.85 2.60 2.17 48 mm 1.60
1 FF-1002-16FO 1 5/16-12UNF 3.85 2.60 2.17 48 mm 1.70
Standard Port Configurations: FP - Female Pipe Thread FO - Female Straight Thread
MP - Male Pipe Thread FB - Female British Standard Pipe Parallel

Minneapolis, MN
FF/FC Series
Hydraulic Quick Couplings HTMA (3/8” size)

suffix -E5 Ethylene Propylene seal material (EPR) FF-501-8FP-E5
suffix -E4 Fluorocarbon seal material FF-501-8FP-E4
Optional seals include O-ring & Back-Up Ring, not Anti-Blow Out bonded seal. Contact QCD for availability and additional options.
FF Series Repair Kits Spline Tool

B Hydraulics
1/4” Nipple FF-252-KIT FF-252-KIT-E4 FF-252-KIT-E5 –

1/4” Coupler FF-251-KIT FF-251-KIT-E4 FF-251-KIT-E5 FF/FS-251-TOOL
3/4” Coupler FF-751-KIT FF-751-KIT-E4 FF-751-KIT-E5 FF/FS-751-TOOL
1” Nipple FF-1002-KIT FF-1002-KIT-E4 FF-1002-KIT-E5 –
1” Coupler FF-1001-KIT FF-1001-KIT-E4 FF-1001-KIT-E5 FF/FS-1001-TOOL
Dust Caps - FF Series

Body
Coupler Dust Cap - Rubber Nipple Dust Cap - Rubber
Size
1/4 FR-25 FR-25
3/8 NR-50 NR-37
1/2 FR-501 FR-502
3/4 FR-751 FR-752
1 FR-1001 FR-1002

Minneapolis, MN
FF/FC Series
Hydraulic Quick Couplings HTMA (3/8” size)
Non-Spill Connect under pressure nipple
Connect Under Pressure Operation

FC Series products operate slightly different from traditional non-
spill couplings. With no pressure in the coupler and up to 3000 PSI
of trapped pressure in the nipple, begin to couple the mating halves.
Delay momentarily during connection to allow trapped pressure to
equalize with the mating half before completing the connection.
FC Series nipples provide a connect-under-pressure option for

trapped pressures up to 3000 psi on the nipple side.
Features:
B Hydraulics
• Connect-under-pressure nipple
• Hardened locking surface
• Blow-out resistant seal
• Protective zinc plating with clear trivalent chromate finish
• Hydraulic tools
Performance
FC Series (3/8", 1/2", 3/4")
FC Series Specifications 60
Rated
Con- Spillage Air 50
3/4"
Rated nect- Rated (ml) Inclusion
Body
40
Pressure Under- Flow max. per (ml)
Size
(psi) Pressure (gpm) discon- max. per
30
Capa- nect connect
bilty
20
1/2"
3/8 3000 3000 6 .015 .020 3/8"
10
1/2 3000 3000 12 .020 .070
3/4 3000 1500 26 .150 .100 0
0 5 10 15 20 25 30 35 40
Flow in USGPM
FC Series Connect Under Pressure Nipples
Body Exposed Largest Wrench Weight

Part Number Mating Half Port End Length
Size Length* Diameter Flats (lbs.)
3/8 FC-372-6FP FEM-371 3/8-18 NPSF 3.30 2.58 1.16 1.062 0.45
3/8 FC-372-8FO FEM-371 3/4-16 UNF 3.30 2.58 1.16 1.062 0.42
3/8 FC-372-8FP FEM-371 1/2-14 NPSF 3.30 2.58 1.16 1.062 0.42
1/2 FC-502-8FP FF-501 1/2-14 NPSF 3.46 2.65 1.22 1.125 0.53
1/2 FC-502-10FO FF-501 7/8-14 UNF 3.46 2.65 1.22 1.125 0.52
3/4 FC-752-12FO FF-751 1 1/16-12 UNF 4.81 3.72 1.65 1.500 1.32
3/4 FC-752-12FP FF-751 3/4-14 NPSF 4.81 3.72 1.65 1.500 1.34

Minneapolis, MN
FEM/FEC Series
Hydraulic Quick Couplings ISO 16028
Non-Spill Push to Connect
FEM Series couplings meet or exceed ISO 16028 design and

performance requirements. The flush valves eliminate spillage
and air inclusion when connecting and disconnecting.
Coupler and nipple bodies have a modular design with
increased flexibility for end port options. FEC nipples provide
a connect-under-pressure option for trapped residual
pressure.
Features
• Global interchangeability with other ISO 16028
B Hydraulics
compliant couplings
• Hardened nipple bodies
• Sleeve-Lok design standard
• Connect-under-pressure FEC nipple option
• Protective zinc nickel plating
• Skid loader attachments
Materials of Construction • Hydraulic tools
Body: Steel
Finish: 1/4”, 5/8” to 1” Zinc with clear trivalent
chromate 3/8” & 1/2” Zinc Nickel
Valve: Flush face valving
Seal: Polyurethane and Nitrile
Performance
FEM Series (1/4", 3/8" & 1/2") FEM Series (5/8", 3/4" & 1")
45.00
30.00
40.00
25.00
35.00
1/4"
1/2"
30.00
20.00
3/4"
25.00
1"
15.00 20.00
3/8" 5/8"
15.00
10.00
10.00
5.00 5.00
0.00
0.00 0.00 10.00 20.00 30.00 40.00 50.00 60.00 70.00 80.00
0.00 2.00 4.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 Flow in USGPM
Flow in USGPM
FEM Series Specifications

Body Rated Pressure Rated Flow Temperature Spillage (ml) max. Air Inclusion (ml) Body Sleeve Seal
Size (psi) (gpm) Range per disconnect max. per connect Material Type Material
1/4 4568 3 .015 .020

3/8 5000 6 .015 .020
1/2 5000 12 .020 .070 Polyurethane
-22º to +212ºF Push to
Steel and
5/8 3625 20 .030 .070 Connect
Nitrile
3/4 3625 26 .150 .100
1 2900 50 .200 .150

Minneapolis, MN
FEM/FEC Series
Non-Spill Part No.: FEM-371-6FP
Title: COUPLER
Rev No.
-
Push to Connect 5.02 in
[127.5 mm]
FEM-371-6FP & FEM-372-6FP
NOTES:
1. MEETS OR EXCEEDS THE DIMENSIONAL AND PERFORMANCE REQUIREMENTS OF ISO16028
2. OPERATING PRESSURE : 5000PSI (345 BAR)
FEM-372-6FP 5000PSI
FEM-371-6FP 5000PSI
3. PRESSURE DROP: 14.5 PSI (1 BAR) MAX AT 6.1 GPM (23 L/MIN) WHEN TESTED PER ISO18869
4. TEMPERATURE RATING: -13°F (-25°C) TO 212°F(100°C)
5. SEAL MATERIAL: POLYURETHANE AND NITRILE
6. PLATING: ZINC NICKEL
3.23 in
FEM Series Couplers

[81.9 mm] Part No.: FEM-372-6FP Rev No.
Title: NIPPLE - 5.02 in
[127.5 mm]
NOTES: FEM-371-6FP & FEM-372-6FP
- PRODUCTION RELEASE 1. MEETS OR EXCEEDS THE DIMENSIONAL AND PERFORMANCE REQUIREMENTS OF ISO16028
1 Sheet 1 Of Revision 2. OPERATING PRESSURE : 5000PSI (345 BAR)
Rev./Ver.
FEM-372-6FP 5000PSI
FEM-371-6FP 5000PSI
Scale: N/A Action Couplings and Related Accessories is part of this document.
Reference: FEM-370 Publication No. 3800-B1.0 Safety Guide for Selecting and Using Quick
Title: COUPLER COPYRIGHT IS FIRST YEAR INDICATED ON THIS DOCUMENT. ALL RIGHTS RESERVED. 6. PLATING: ZINC NICKEL
FURTHER USE DISCONTINUED UPON REQUEST BY PARKER. COPYRIGHT PARKER YEAR OF
Part No.: FEM-371-6FP ANY OTHER PURPOSE THAN CONDUCTING BUSINESS WITH PARKER, AND WILL BE RETURNED AND ALL
AND THE INFORMATION IT CONTAINS WILL NOT BE COPIED OR DISCLOSED TO OTHERS OR USED FOR
Fluid Connectors
HANNIFIN ("PARKER"). THIS DOCUMENT IS FURNISHED ON THE UNDERSTANDING THAT THE DOCUMENT
1.80 in
[45.6 mm]
THIS DOCUMENT CONTAINS INFORMATION THAT IS CONFIDENTIAL AND PROPRIETARY TO PARKER
Division Approved: J. MIKULSKI Checked: A. LEGAULT

Quick Coupling Date: 5/8/2020 Drawn: J. MIKULSKI
CUSTOMER DRAWING Modeled: J. MIKULSKI
FEM-371-6FP 5000PSI
FEM-372-6FP 5000PSI
FEM-371-6FP 5000PSI
Modeled: J. MIKULSKI CUSTOMER DRAWING
A = FEMALE Drawn: J. MIKULSKI

Checked: A. LEGAULT
B = MALE Date: 5/9/2020
Approved: J. MIKULSKI
Quick Coupling
Division
EXPOSED LENGTH EXPOSED LENGTH Fluid Connectors
[81.9 mm]
3.23 in THIS DOCUMENT CONTAINS INFORMATION THAT IS CONFIDENTIAL AND PROPRIETARY TO PARKER
6. PLATING: ZINC NICKEL ANY OTHER PURPOSE THAN CONDUCTING BUSINESS WITH PARKER, AND WILL BE RETURNED AND ALL Part No.: FEM-372-6FP
Title: NIPPLE
FEM-371-6FP 5000PSI
FEM-372-6FP 5000PSI
5. SEAL MATERIAL: POLYURETHANE AND NITRILE COPYRIGHT IS FIRST YEAR INDICATED ON THIS DOCUMENT. ALL RIGHTS RESERVED.
Reference: FEM-370
3. PRESSURE DROP: 14.5 PSI (1 BAR) MAX AT 6.1 GPM (23 L/MIN) WHEN TESTED PER ISO18869 Publication No. 3800-B1.0 Safety Guide for Selecting and Using Quick
Action Couplings and Related Accessories is part of this document. Scale: N/A
Revision Sheet 1 Of 1 Rev./Ver.
-
PRODUCTION RELEASE
Coupled Length
NOTES:
[127.5 mm] - Title: COUPLER
5.02 in Rev No. Part No.: FEM-371-6FP

Drawn: J. MIKULSKI Date: 5/8/2020 Quick Coupling
Body Coupler (when connected Largest Wrench Weight

Checked: A. LEGAULT Approved: J. MIKULSKI Division
Fluid Connectors
Port End Length

Part No.: FEM-371-6FP
Size Part Number to corresponding Diameter Flats (lbs.)

ANY OTHER PURPOSE THAN CONDUCTING BUSINESS WITH PARKER, AND WILL BE RETURNED AND ALL
COPYRIGHT IS FIRST YEAR INDICATED ON THIS DOCUMENT. ALL RIGHTS RESERVED. Title: COUPLER
Publication No. 3800-B1.0 Safety Guide for Selecting and Using Quick Reference: FEM-370
Revision
PRODUCTION RELEASE
Sheet 1 Of
nipple)
1
-
Rev./Ver.
B Hydraulics
1/4 FEM-251-4FP 1/4-18 NPTF 1.96 3.98 1.16 27mm 0.52
1/4 FEM-251-6FO 9/16-18 UNF 2.08 4.06 1.16 27mm 0.51
3/8 FEM-371-6FP 3/8-18 NPTF 3.06 5.02 1.26 30 mm 0.77
3/8 FEM-371-8FO 3/4-16 UNF 3.06 5.02 1.26 30 mm 0.74
3/8 FEM-371-8FB G1/2 BSPP 3.17 5.23 1.31 30 mm 0.75
1/2 FEM-501-8FP 1/2-14 NPTF 3.26 5.74 1.59 36 mm 1.22
1/2 FEM-501-8FO 3/4-16 UNF 3.26 5.74 1.59 36 mm 1.22
1/2 FEM-501-8FB G1/2 BSPP 3.07 5.35 1.59 36 mm 1.14
1/2 FEM-501-10FO 7/8-14 UNF 3.08 5.38 1.59 36 mm 1.12
1/2 FEM-501-12FO 1 1/16-12 UNF 3.26 5.74 1.59 36 mm 1.11
1/2 FEM-501-12FB G3/4 BSPP 3.25 5.71 1.59 36 mm 1.14
5/8 FEM-621-12FO 1 1/16-12 UNF 3.70 5.64 1.69 40 mm 1.34
3/4 FEM-751-12FP 3/4-14 NPTF 3.95 6.00 1.97 46 mm 1.98
3/4 FEM-751-12FO 1 1/16-12 UNF 3.95 6.20 1.97 46 mm 2.00
1 FEM-1001-16FP 1-11 1/2-NPTF 4.21 6.79 2.36 55 mm 3.08
1 FEM-1001-16FO 1 5/16-12 UNF 4.21 6.79 2.36 55 mm 3.03
FEM Series Couplers - 90 Degree Part No.: FEM-372-6FP

Title: NIPPLE
NOTES:
Rev No.
- 5.02 in
[127.5 mm]
FEM-372-6FP 5000PSI
FEM-371-6FP 5000PSI
COUPLED LENGTH = A + B 1.80 in

[45.6 mm]
FEM-372-6FP 5000PSI
A = FEMALE Modeled: J. MIKULSKI
Drawn: J. MIKULSKI B = MALE CUSTOMER DRAWING
Date: 5/9/2020 Quick Coupling
EXPOSED LENGTH Checked: A. LEGAULT
EXPOSED LENGTH
Fluid Connectors
Division
ANY OTHER PURPOSE THAN CONDUCTING BUSINESS WITH PARKER, AND WILL BE RETURNED AND ALL Part No.: FEM-372-6FP
COPYRIGHT IS FIRST YEAR INDICATED ON THIS DOCUMENT. ALL RIGHTS RESERVED. Title: NIPPLE
-
Coupled Length
PRODUCTION RELEASE

Port End Length
nipple)
1/2 FEM-501-C6FP 3/8-18 NPTF 3.26 5.74 1.59 32 mm 1.187
1/2 FEM-501-C8FO 3/4-16 ORB 3.25 5.71 1.59 36 mm 1.187
FEM Series Couplers - Bulkhead Part No.: FEM-372-6FP Rev No.

[127.5 mm]
FEM-372-6FP 5000PSI
FEM-371-6FP 5000PSI

COUPLED LENGTH = A + B 1.80 in

[45.6 mm]
FEM-372-6FP 5000PSI
A = FEMALE Drawn: J. MIKULSKI

Checked: A. LEGAULT
B = MALE Date: 5/9/2020
Quick Coupling
Division
Fluid Connectors

PRODUCTION RELEASE -
Coupled Length
Port End Length
nipple)
1/2 FEM-501-10BMF 7/8-14 UNF 4.02 6.32 1.54 32 mm 1.07
1/2 FEM-501-10BMS 1-14 UNS 4.02 6.32 1.59 36 mm 1.16
suffix -E5 Ethylene Propylene seal material (EPR) FEM-501-8FP-E5
suffix -E4 Fluorocarbon seal material FEM-501-8FP-E4
Contact QCD for availability and additional options. To select proper seal materials, see Fluid Compatibility Chart or contact QCD.

Minneapolis, MN
FEM/FEC Series
Non-Spill
Part No.: FEM-372-6FP Rev No.
Push to Connect
[127.5 mm]
FEM-372-6FP 5000PSI
FEM-371-6FP 5000PSI
Part No.: FEM-372-6FP Rev No.
-
FEM Series Nipples

5.02 in
1.80 in Title: NIPPLE [127.5 mm]
[45.6 mm] NOTES: FEM-371-6FP & FEM-372-6FP
FEM-372-6FP 5000PSI
FEM-371-6FP 5000PSI
1.80 in
[45.6 mm]
FEM-372-6FP 5000PSI
FEM-372-6FP 5000PSI
A = FEMALE B = MALE Date:CUSTOMER
Modeled: J. MIKULSKI
Drawn: J. MIKULSKI 5/9/2020
DRAWING
Quick Coupling
Checked: A. LEGAULT Approved: J. MIKULSKI
Fluid Connectors
Division
Coupled Length
Title: NIPPLE
Modeled: J. MIKULSKI CUSTOMER DRAWING COPYRIGHT IS FIRST YEAR INDICATED ON THIS DOCUMENT. ALL RIGHTS RESERVED.
Body Nipple Largest Wrench Weight

Drawn: J. MIKULSKI Date: 5/9/2020 Quick Coupling Action Couplings and Related Accessories is part of this document. Scale: N/A
Division Revision Sheet 1 Of 1 Rev./Ver.

-
Port End Length

Checked: A. LEGAULT Approved: J. MIKULSKI
(when connexcted to
PRODUCTION RELEASE
THIS DOCUMENT CONTAINS INFORMATION THAT IS CONFIDENTIAL AND PROPRIETARY TO PARKER Fluid Connectors
Size Part Number

Diameter Flats (lbs.)

corresponding coupler)
-
1/4 FEM-252-4FP 1/4-18 NPTF 1.71 3.98 0.96 22 mm 0.20
PRODUCTION RELEASE
1/4 FEM-252-6FO 9/16-18 UNF 1.95 4.06 0.96 22 mm 0.19

3/8 FEM-372-6FP 3/8-18 NPTF 2.59 5.02 1.26 30 mm 0.48
3/8 FEM-372-8FO 3/4-16 UNF 2.59 5.02 1.26 30 mm 0.45
B Hydraulics
3/8 FEM-372-8FB G1/2 BSPP 2.69 5.22 1.26 30 mm 0.47

1/2 FEM-502-8FP 1/2-14 NPTF 3.13 5.74 1.57 36 mm 0.84
1/2 FEM-502-8FO 3/4-16 UNF 3.13 5.74 1.57 36 mm 0.85
1/2 FEM-502-8FB G1/2 BSPP 2.95 5.35 1.57 36 mm 0.77
1/2 FEM-502-10FO 7/8-14 UNF 2.95 5.38 1.57 36 mm 0.75
1/2 FEM-502-12FO 1 1/16-12 UN 3.13 5.74 1.57 36 mm 0.74
1/2 FEM-502-12FB G3/4 BSPP 3.13 5.71 1.57 36 mm 0.76
5/8 FEM-622-12FO 1 1/16-12 UN 3.09 5.64 1.57 36 mm 0.72
3/4 FEM-752-12FP 3/4-14 NPTF 3.38 6.00 1.97 46 mm 1.17
3/4 FEM-752-12FO 1-1/16 12 UN 3.38 6.20 1.974 46 mm 1.20
1 FEM-1002-16FP 1-11 1/2 NPTF 3.85 6.79 2.36 55 mm 1.94
1 FEM-1002-16FO 1-5/16 12 UN 3.85 6.79 2.36 55 mm 1.90
FEM Series Nipples - 90 Degree

A = FEMALE B = MALE
Body Coupler Coupled Length Largest Wrench Weight

Port End Length (when connexcted to
Size Part Number corresponding coupler) Diameter Flats (lbs.)
1/2 FEM-502-C6FP 3/8-18 NPTF 3.13 5.74 1.57 36 mm .82
1/2 FEM-502-C8FO 3/4-16 ORB 3.13 5.71 1.57 36 mm .82
FEM Series Nipples - Bulkhead

A = FEMALE B = MALE
Coupled Length
Body Nipple (when connected Largest Wrench Weight
Port End Length
nipple)
1/2 FEM-502-10BMF 7/8-14 UNF 3.85 7.24 1.38 31.75 mm .84
1/2 FEM-502-10BMS 1-14 UNS 3.85 7.24 1.38 31.75 mm .84
Dust Caps - FEM Series
Body Body
Nipple Dust Cap Coupler Dust Cap Material Nipple Dust Cap Coupler Dust Cap Material
Size Size
1/4 CFE-252-PN PFE-251-PN PVC 5/8 CFE-622-PN PFE-621-PN PVC
3/8 CFE-372-PN PFE-371-PN PVC 3/4 CFE-752-PN PFE-751-PN PVC
1/2 CFE-502-PN PFE-501-PN PVC 1 CFE-1002-PN PFE-1001-PN PVC
Standard Port Configurations: FP - Female Pipe Thread FO - Female Straight Thread BMF - Bulkhead Flare BMS - Bulkhead Face Seal
FB - Female British Standard Parallel Pipe Other Fitting Port Configurations available upon request.

Minneapolis, MN
FEM/FEC Series
Non-Spill Connect under pressure nipple
Applications
Parker FEC Series nipple provide connect-under-pressure capability

with up to 3000 PSI of trapped pressure in the nipple and are ideal
for applications where residual pressure makes reconnect difficult.
Utilized primarily in the construction equipment market, FEC Series
products are commonly found on hydraulic attachments used in
skid steer applications. The FEC Series mates with the FEM Series
interface ISO 16028 couplers.
Features:
• Connect-Under-Pressure nipple
B Hydraulics
• Hardened locking surface
• Steel construction, Chromium-6 Free plating
for corrosion resistance
• Anti blowout bonded nipple seal
• Flush face valving
Performance
Connect Under Pressure Operation FEC Series (1/2", 5/8", 3/4")
FEC Series products operate slightly different from traditional non- 80
spill couplings. With no pressure in the coupler and up to 3000 PSI
of trapped pressure in the nipple, begin to couple the mating halves. 70
Delay momentarily during connection to allow trapped pressure to 5/8"
60
equalize with the mating half before completing the connection.
3/4"

50
FEC Series Specifications 40

1/2"
Spillage 30
Air Inclusion
Rate Rated Connect- Rated (ml)
Body (ml) 20
Pressure Under-Pressure Flow max. per
Size max. per
(psi) Capabilty (gpm) discon-
connect 10
nect
0
1/2 3625 3000 12 .020 .070 0 10 20 30 40
5/8 3625 1700 20 .003 .070 Flow in USGPM
3/4 3625 1500 26 .150 .100
FEC Series Connect Under Pressure Nipples

A = FEMALE B = MALE
Coupled Length
Body Mating Largest Wrench Weight
Part Number Port End Length (when connected to
Size Half Diameter Flats (lbs.)
corresponding nipple)
1/2 FEC-502-8FP FEM-501 1/2-14 NPTF 3.50 5.82 1.22 1.125 –
1/2 FEC-502-10FO FEM-501 7/8-14 UNF 3.50 5.82 1.22 1.125 –
1/2 FEC-502-12FO FEM-501 1 1/16-12 UNF 3.79 6.36 1.65 1.500 –
5/8 FEC-622-12FO FEM-621 1 1/16-12 UN 3.39 5.94 1.65 1.500 –
3/4 FEC-752-12FO FEM-751 1 1/16-12 UN 3.76 6.58 1.65 1.500 –

Minneapolis, MN
FH Series
Hydraulic Quick Couplings HTMA (High Pressure)
Non-Spill Push-to-connect/sleeve lock
FH Series high pressure, non-spill couplings have flush valves

and are designed to minimize spillage and air inclusion when
connecting or disconnecting. Couplers and nipples are steel
with nitrile seals. Available in 3/8 inch size only, with red finish
for easy identification. Will not connect with lower pressure
flush face couplings.
Features:
• Rated pressure up to 10,000 psi
• Push to connect operation
B Hydraulics
• Red finish on nipple body and coupler sleeve

• Standard sleeve lock guards against accidental
disconnection
• Not interchangeable with lower pressure flush face
couplings
• Standard end configurations include female pipe, male
pipe, and BSPP threads
Applications:
• Hydraulic crimpers, cutters, benders, clamps, wedges
• Rescue equipment
• High pressure test equipment
Performance FH Series (3/8")

Test Fluid: Oil - 200 SUS Specifications
45
Body Size 3/8
40
Rated Pressure (PSI) 10,000
35
Rated Flow (GPM) 6
30
Temperature Range -40° to +250° F
25
3/8" Spillage (ML)
.020
20 (max. per disconnect)
Air Inclusion (ML)
15 .070
(max. per connect)
10
0
Materials of Construction
0 1 2 3 4 5 6 7 8 9
Body Steel
Flow in USGPM
Finish Chromium-6 Free plating
Valve Flush Face Valves
Seal Anti blow-out Nitrile/PTFE bonded seal (nipple only)

suffix -E5 Ethylene Propylene seal material (EPR) FH-371-6FP-E5
suffix -E4 Fluorocarbon seal material FH-371-6FP-E4
Optional seals include O-ring & Back-Up Ring, not Anti-Blow Out bonded seal. Contact QCD for availability and additional options.

Minneapolis, MN
FH Series
Hydraulic Quick Couplings HTMA (High Pressure)
Non-Spill Push-to-connect/sleeve lock
Couplers
Body Part Number

Size Steel
3/8 FH-371-6FP 3/8 -18 NPTF 2.63 1.23 1.12 0.44
B Hydraulics
3/8 FH-371-6MP 3/8 -18 NPTF 2.85 1.23 1.12 0.45
3/8 FH-371-6FB G3/8 -BSPP 2.63 1.23 1.12 0.45
Nipples
Body Part Number

Size Steel
3/8 FH-372-6FP 3/8-18 NPTF 2.12 1.23 1.00 0.26
3/8 FH-372-6FB G3/8 -BSPP 2.12 1.23 1.00 0.28
Standard Port Configurations: FP - Female Pipe Thread MP - Male Pipe Thread FB - Female British Parallel Pipe
FH Series Dust Caps
Body
Size
3/8 NR-50 NR-37

Minneapolis, MN
FS Series
Hydraulic Quick Couplings Stainless Steel
Non-Spill Flush face valves, chemical compatibility
FS Series dry disconnect couplings are ideal for closed

system transfer and dispensing of chemicals and other
fluids. The flush valves eliminate spillage and air inclusion
when connecting and disconnecting to result in minimal
environmental contamination.
Features:
• Flush, non-spill valves enable ease of cleaning
• 316 stainless steel material for chemical compatibility
• Push to connect operation
B Hydraulics
• Fluorocarbon standard seal material with options available
• Chemical dispensing systems
• Chemical processing
• Food processing
• Corrosive media transfer
Materials of Construction
Machined Parts: Stainless Steel, AISI type 316
Springs: Stainless Steel, AISI type 316.
Locking Balls: 1/4 - 3/8”: 302 SS;
1/2 - 3/4”: 316 SS
1”: 440 SS
Backup Washers: PTFE
Elastomer Seals: Fluorocarbon is standard.
Wide range is available. Performance Flow Data
FS Series (1/4", 3/8", 1/2")
Test Fluid: Water
30
Specifications
25
Rated
Rated Spillage (ml) Air Inclusion 1/2"
Body Pres- 20
Flow max. per (ml) max. CV
Size sure 3/8"
(gpm) disconnect per connect
(psi) 15
1/4"
1/4 2000 3 .015 .010 0.90 10
3/8 2000 6 .015 .020 1.80

5
1/2 2000 12 .020 .070 3.00
0
3/4 2000 28 .150 .100 7.00 0 2 4 6 8 10 12 14 16 18
Flow in USGPM
1 2000 50 .250 .182 10.1
FS Series (3/4" & 1")
Temperature Range (continuous) Test Fluid: Water
35
Part No. Seal Suffix Seal Compound Temp° F Rating
30
None* Fluorocarbon -15 to 400 1"
25
Ethylene Propylene
E5 -65 to 300
(EPR) 20
3/4"
E1 Nitrile -40 to 250 15
Perfluoroelastomer
E35 -20 to 600 10
(Contact QCD)
5
*Fluorocarbon is standard seal.
Contact QCD for availability and additional options. 0
To select proper seal materials, see Fluid Compatibility Chart or contact QCD. 0 10 20 30 40 50 60 70
Flow in USGPM
suffix -E5 Ethylene Propylene seal material- EPR) FS-371-6FP-E5
suffix -E12 Neoprene seal material FS-371-6FP-E12

Minneapolis, MN
FS Series
FS Series Couplers - Female Thread

Port End Length Wrench Flats Weight (lbs.)
1/4 FS-251-4FP 1/4-18 NPT 1.79 1.06 1.00 0.25
B Hydraulics
1/4 FS-251-4MP 1/4-18 NPTF 2.00 1.06 1.00 0.25
1/4 FS-251-6FO 9/16-18UNF 1.92 1.06 1.00 0.24
3/8 FS-371-6FP 3/8-18 NPT 2.52 1.30 1.06 0.58
3/8 FS-371-8FO 3/4-16 UNF 2.83 1.30 1.06 0.63
1/2 FS-501-8FP 1/2-14 NPT 2.74 1.58 1.38 0.92
1/2 FS-501-10FO 7/8-14 UNF 2.86 1.58 1.38 0.96
3/4 FS-751-12FP 3/4-14 NPT 3.63 1.99 1.75 2.00
3/4 FS-751-12FO 1-1/16-12 UNF 3.73 1.99 1.75 2.04
1 FS-1001-16FP 1-11 1/2 NPT 4.14 2.25 1.87 2.76
1 FS-1001-16FO 1-5/16-12 UNF 4.24 2.25 1.87 2.80
FS Series Nipples - Female Thread
Body Coupler Overall Exposed Largest

Port End Wrench Flats Weight (lbs.)
Size Part Number Length Length* Diameter
1/4 FS-252-4FP 1/4-18 NPT 1.66 1.14 1.06 1.00 0.18
1/4 FS-252-4MP 1/4-18 NPTF 1.87 1.34 1.06 1.00 0.18
1/4 FS-252-6FO 9/16-18 UNF 1.78 1.26 1.06 1.00 0.17
3/8 FS-372-6FP 3/8-18 NPT 2.31 1.71 1.08 0.94 0.26
3/8 FS-372-8FO 3/4-16 UNF 2.45 1.71 1.19 1.06 0.30
1/2 FS-502-8FP 1/2-14 NPT 2.75 2.03 1.30 1.12 0.44
1/2 FS-502-10FO 7/8-14 UNF 2.85 2.11 1.30 1.12 0.48
3/4 FS-752-12FP 3/4-14 NPT 3.38 2.37 1.65 1.50 1.02
3/4 FS-752-12FO 1-1/16-12 UNF 3.38 2.37 1.65 1.50 1.02
1 FS-1002-16FP 1-11 1/2 NPT 3.89 2.60 2.17 1.87 1.60
1 FS-1002-16FO 1-5/16 12 UNF 3.89 2.51 2.17 1.87 1.64
Standard Port Configurations: FP - Female Pipe Thread MP - Male Pipe Thread FO - Female Straight Thread
Dust Caps - FS Series

Body
Size
1/4 FR-25 FR-25
3/8 NR-50 NR-37
1/2 FR-501 FR-502
3/4 FR-751 FR-752
1 FR-1001 FR-1002

Minneapolis, MN
FS Series
FS Series Repair Kits

Repair kits are available for both coupler and nipple half of FS coupling. Kits include
replacement elastomer seals, valve assembly and instructions to perform rebuild. Spline
tool must be ordered separately to accomplish coupler half repair. Other tools required:
Vise, Allen Wrench and Open End Wrench.
FS Repair Kits
Replacement Seals
TOOL Spline tool for No Suffix Fluorocarbon Seals
B Hydraulics
Coupler Repair E5 Ethylene Propylene (EPR)

E35 Perfluoroelastomer (Contact Factory for Seal Options).
Nipple Repair Kits

1/4 FS-252-KIT FS-252-KIT-E5
3/8 FS-372-KIT FS-372-KIT-E5
1/2 FS-502-KIT FS-502-KIT-E5

3/4 FS-752-KIT FS-752-KIT-E5
1 FS-1002-KIT FS-1002-KIT-E5
Coupler Repair Kits Spline Tool

1/4 FS-251-KIT FS-251-KIT FF/FS-251-TOOL
3/8 FS-371-KIT FS-371-E5 FF/FS-371-TOOL
1/2 FS-501-KIT FS-501-KIT-E5 FS-501-TOOL

3/4 FS-751-KIT FS-751-KIT-E5 FF/FS-751-TOOL
1 FS-1001-KIT FS-1001-KIT-E5 FF/FS-1001-TOOL

Minneapolis, MN
59 Series
Hydraulic Quick Couplings High pressure, Non-Spill
High Pressure Screw to connect
59 Series couplings are ideal for use in high pressure, high impulse
applications that require the security of a threaded connection and the
ability to connect and disconnect under pressure. The robust ACME
thread has a double start and allows full connection to be quickly
completed in 2-1/2 turns. An internal bearing between the collar and
the body keeps resistance to a minimum for an easy connection.
Features:
• Up to 6000 psi operating pressure

• Connect under residual pressure up to 5000 psi
B Hydraulics
• Disconnect under residual pressure up to 2500 psi
• Double start ACME threads provide a quick and
strong connection
• High impulse resistance
• High strength materials
• Zinc nickel coating for extended durability and
corrosion resistance
• Flat-face, non-spill design
• Visual and tactile confirmation when full connection
is complete
• Mobile drill rigs
• Oil field equipment
• Umbilical lines
• High impulse mobile circuits
• Excavator attachments
Temperature Range Seal Material Body Material Valve Material Sleeve Type Plating
Zinc Nickel Plating/
-40° to +250° F Nitrile/Polyurethane Steel Stainless Steel Thread to Connect
FNC Coating
Performance
59 Series (1/2" & 3/4") 59 Series (1" & 1-1/2")

Test Fluid: Oil - 150 SUS) Test Fluid: Oil - 150 SUS)
80.00
50.00 1"
70.00
1/2"
3/4"
60.00
40.00
50.00
30.00
40.00
1-1/2"
20.00 30.00
20.00
10.00
10.00
0.00 0.00
0 5 10 15 20 25 30 35 40 45 50 55 0.00 20.00 40.00 60.00 80.00 100.00 120.00 140.00

Minneapolis, MN
59 Series
Hydraulic Quick Couplings High Pressure, Non-Spill
High Pressure Screw to connect
59 Series Couplers
L
W1
W2
1/2" Body Size
Body Coupler Length Largest Wrench Flats Wrench Flats Weight Rated
Port End
Size Part Number (in) Diameter (in) W1 W2 (lbs.) Pressure (psi)
B Hydraulics
1/2 59-501-8FP 1/2 - 14 NPSF 3.70 2.05 1-1/2" 1-7/8" 1.35 6000
1/2 59-501-8FO 3/4 - 16 UNF 3.74 2.05 1-1/2" 1-7/8" 1.37 6000
3/4 59-751-12FP 3/4 - 14 NPTF 5.53 2.49 2-3/8" 2" 3.72 6000
3/4 59-751-12FO 1 1/16 - 12 UNF 5.34 2.49 2-3/8" 2" 3.68 6000
1 59-1001-16FP 1 - 11 1/2 NPTF 5.82 2.75 65 mm 2-3/16" 4.82 6000
1 59-1001-16FO 1 5/16 - 12 UNF 5.82 2.75 65 mm 2-3/16" 4.77 6000
1-1/2 59-1501-20FP 1 1/4 - 11 1/2 NPTF 7.08 3.74 90 mm 2-5/8" 9.92 5000
1-1/2 59-1501-20FO 1 5/8 - 12 UNF 7.08 3.74 90 mm 2-5/8" 9.67 5000
1-1/2 59-1501-24FP 1 1/2 - 11 1/2 NPTF 7.08 3.74 90 mm 2-5/8" 9.92 5000
1-1/2 59-1501-24FO 1 7/8 - 12 UNF 7.08 3.74 90 mm 2-5/8" 9.67 5000
59 Series Nipples
L
W1 W2
1/2" Body Size
Body Coupler Length Largest Wrench Flats Wrench Flats Weight Rated
Port End
Size Part Number (in) Diameter (in) W1 W2 (lbs.) Pressure (psi)
1/2 59-502-8FP 1/2 - 14 NPSF 3.50 1.88 1-3/4" 1-1/8" 1.07 6000
1/2 59-502-8FO 3/4 - 16 UNF 3.50 1.88 1-1/2" 1-7/8" 1.07 6000
3/4 59-752-12FP 3/4 - 14 NPTF 4.65 2.31 55 mm 2" 2.81 6000
3/4 59-752-12FO 1 1/16 - 12 UNF 4.77 2.31 55 mm 2" 2.87 6000
1 59-1002-16FP 1 - 11 1/2 NPTF 5.12 2.75 65 mm 2-3/16" 4.42 6000
1 59-1002-16FO 1 5/16 - 12 UNF 5.12 2.75 65 mm 2-3/16" 4.38 6000
1-1/2 59-1502-20FP 1 1/4 - 11 1/2 NPTF 5.94 3.75 75 mm 2-5/8" 8.33 5000
1-1/2 59-1502-20FO 1 5/8 - 12 UNF 5.94 3.75 75 mm 2-5/8" 8.29 5000
1-1/2 59-1502-24FP 1 1/2 - 11 1/2 NPTF 5.94 3.75 75 mm 2-5/8" 8.33 5000
1-1/2 59-1502-24FO 1 7/8 - 12 UNF 5.94 3.75 75 mm 2-5/8" 8.29 5000
59 Series Nipple O- 59 Series Nipple Dust Cap 59 Series Coupler Dust Plug
Ring Body Nipple Body Coupler
Replacement Exter- Size Dust Cap Size Dust Plug
Body
nal 1/2 595DC-01 1/2 595DP-01
Size
O-Ring on Nipple
3/4 597DC-01 3/4 597DP-01
1/2 4317-2-219
1 5910DC-01 1 5910DP-01
3/4 4317-2-224
1 1/2 5915DC-01 1 1/2 5915DP-01
1 4317-2-226
1 1/2 4317-2-234

Minneapolis, MN
FET Series
Hydraulic Quick Couplings Connect Under Pressure
Non-Spill Screw to connect
FET Series couplings are built to be used in high pressure,

high impulse applications that require the security of a
threaded connection and the ability to connect and disconnect
under residual pressure. Interchanges with similar European
style thread-to-connect couplings.
Features:
• Connect under residual pressure up to 5000 psi
• Disconnect under residual pressure up to 2500 psi
• High impulse resistance
B Hydraulics
• High strength materials
• FNC coating for extended durability and corrosion
resistance
• Visual connection indicator
• Mobile drill rigs
• Umbilical lines
• High impulse mobile circuits
• Excavator attachments
FET Series Specifications

Body
Euro Rated Pres- Temperature Body Sleeve Seal
Size Port End
Size sure (psi) Range Material Type Material
(inch)
Female ORB 6000
3/8 9
Female NPTF 6000
Female ORB 6000
1/2 13
Female NPTF 6000
Female ORB 5000
5/8 15
Female NPTF 5000
Female ORB 5000
Female NPTF 5000
3/4 17
Code 62 Flange Head 6000
Code 62 Flange Pad 6000 -40º to Thread to Nitrile/
Steel
Female ORB 6000 +250ºF Connect Polyurethane
Female NPTF 6000

1 21
Code 62 Flange Pad 6000
Female ORB 5000
Female NPTF 5000
1-1/2 30
Code 62 Flange Pad 5000
Female ORB 5000
2 45
Female NPTF 5000

Minneapolis, MN
FET Series
Performance
FET Series (3/8", 1/2", 5/8" & 3/4") FET Series (1", 1-1/2" & 2”)
Test Fluid: Oil - 150 SUS) Test Fluid: Oil - 150 SUS)
3/4" 80.00
1"
50.00 70.00
1/2"

5/8" 60.00
40.00
3/8" 2"
50.00
B Hydraulics
30.00 1-1/2"
40.00
30.00
20.00
20.00
10.00
10.00
0.00 0.00
0.00 5.00 10.00 15.00 20.00 25.00 30.00 35.00 40.00 45.00 50.00 55.00 0.00 50.00 100.00 150.00 200.00 250.00 300.00
FET Series Couplers

L
W1 W2
Body Coupler Largest Wrench Flats Wrench Flats Weight

Port End Length (in)
Size Part Number Diameter (in) W1 W2 (lbs.)
3/8 FET-371-8FO 3/4 -16 UNF 3.83 1.65 38 mm 30 mm 0.91
3/8 FET-371-8FP 1/2 -14 NPTF 3.91 1.65 38 mm 30 mm 0.92
1/2 FET-501-10FO 7/8 -14 UNF 3.82 2.05 48 mm 1-1/2 in 1.40
1/2 FET-501-8FP 1/2 -14 NPTF 3.70 2.05 48 mm 1-1/2 in 1.38
5/8 FET-621-12FO 1 1/16 -12 UNF 4.66 2.12 50 mm 1-5/8 in 2.06
5/8 FET-621-12FP 3/4 -14 NPTF 4.52 2.12 50 mm 1-5/8 in 2.03
3/4 FET-751-16FO 1 5/16 -12 UNF 5.44 2.31 55 mm 2 in 3.30
3/4 FET-751-16FP 1 - 11 1/2 NPTF 5.44 2.31 55 mm 2 in 3.35
1 FET-1001-20FO 1 5/8 - 12 UNF 5.83 2.75 65 mm 2-3/16 in 4.72
1 FET-1001-20FP 1 1/4 -11 1/2 NPTF 5.83 2.75 65 mm 2-3/16 in 4.76
1-1/2 FET-1501-24FO 1 7/8 - 12 UNF 7.08 3.75 85 mm 2-5/8 in 10.01
1-1/2 FET-1501-24FP 1 1/2 - 11 1/2 NPTF 7.08 3.75 85 mm 2-5/8 in 10.06
2 FET-2001-32FO 2 1/2 - 12 UN 11.67 7.52 - 3-3/4 33.73
2 FET-2001-32FP 2 - 11 1/2 NPTF 11.67 7.52 - 3-3/4 34.05

Minneapolis, MN
FET Series
FET Series Couplers - Code 62 Flange

L
L
W1 W1 W2
W2
D D
Largest Wrench Wrench

Body Coupler Bolt Thread Length Weight
Port End Diameter Flats Flats
Size Part Number Size (in) (lbs.)
B Hydraulics
(in) W1 (mm) W2 (in)
3/4 FET-751-16SF Flange Head - 7.60 2.31 55 2 4.17
3/4 FET-751-16SFP Flange Pad 7/16 - 14 UNC 5.45 2.31 55 2-3/4 4.82
1 FET-1001-20SF Flange Head - 7.78 2.75 65 2-3/16 5.44
1 FET-1001-20SFP Flange Pad 1/2 - 13 UNC 5.83 2.75 65 3 6.90
1-1/2 FET-1501-24SF Flange Head - 9.83 3.75 85 2-5/8 11.37
1-1/2 FET-1501-24SFP Flange Pad 5/8 - 11 UNC 6.82 3.75 85 2-5/8 13.31
FET Series Nipples

L
W1
W2
Body Nipple Largest Wrench Flats Wrench Flats Weight

Port End Length (in)
Size Part Number Diameter (in) W1 W2 (lbs.)
3/8 FET-372-8FO 3/4 -16 UNF 3.51 1.60 38 mm 1-1/4 in 0.99
3/8 FET-372-8FP 1/2 -14 NPTF 3.51 1.60 38 mm 1-1/4 in 0.99
1/2 FET-502-10FO 7/8 -14 UNF 3.70 1.88 44 mm 1-1/8 in 1.14
1/2 FET-502-8FP 1/2 -14 NPTF 3.50 1.88 44 mm 1-1/8 in 1.13
5/8 FET-622-12FO 1 1/16 -12 UNF 4.21 2.12 50 mm 1-5/8 in 2.05
5/8 FET-622-12FP 3/4 -14 NPTF 4.08 2.12 50 mm 1-5/8 in 2.02
3/4 FET-752-16FO 1 5/16 -12 UNF 4.72 2.31 55 mm 2 in 2.76
3/4 FET-752-16FP 1 - 11 1/2 NPTF 4.65 2.31 55 mm 2 in 2.72
1 FET-1002-20FO 1 5/8 - 12 UNF 5.12 2.75 65 mm 2-3/16 in 4.31
1 FET-1002-20FP 1 1/4 -11 1/2 NPTF 5.12 2.75 65 mm 2-3/16 in 4.35
1-1/2 FET-1502-24FO 1 7/8 - 12 UNF 5.94 3.75 75 mm 2-5/8 in 7.94
1-1/2 FET-1502-24FP 1 1/2 -11 1/2 NPTF 5.94 3.75 75 mm 2-5/8 in 8.00
2 FET-2002-32FO 2 1/2 - 12 UN 8.56 5.70 4-1/2 in 3-3/4 in 25.51
2 FET-2002-32FP 2 -11 1/2 NPTF 8.56 5.70 4-1/2 in 3-3/4 in 25.83

Minneapolis, MN
FET Series
FET Series Nipples - Code 62 Flange

L L
W1 W2 W2
W1
D
D
Largest Wrench Wrench

Body Nipple Bolt Thread Length Weight
Port End Diameter Flats Flats
Size Part Number Size (in) (lbs.)
B Hydraulics
(in) W1 (mm) W2 (in)

3/4 FET-752-16SF Flange Head - 6.32 2.31 55 2 3.10
3/4 FET-752-16SFP Flange Pad 7/16 - 14 UNC 4.74 2.31 55 2-3/4 4.33
1 FET-1002-20SF Flange Head - 6.70 2.75 65 2-3/16 4.71
1 FET-1002-20SFP Flange Pad 1/2 - 13 UNC 5.27 2.75 65 3 6.78
1-1/2 FET-1502-24SF Flange Head - 7.77 3.75 75 2-5/8 8.08
1-1/2 FET-1502-24SFP Flange Pad 5/8 - 11 UNC 5.94 3.75 75 2-5/8 12.17
FET Series Dust Caps and Plugs FET Series Nipple Replacement O-Ring
Body Nipple Coupler Body O-Ring

Ref Nipple P/N
Size Dust Cap Dust Plug Size Part Number
3/8 FET3DC-01 FET3DP-01 3/8 50001-122-0160 FET-372
1/2 FET5DC-01 FET5DP-01 1/2 50001-219-0160 FET-502
5/8 FET6DC-01 FET6DP-01 5/8 50001-222-0160 FET-622
3/4 FET7DC-01 FET7DP-01 3/4 50001-224-0160 FET-752
1 FET10DC-01 FET10DP-01 1 50001-226-0160 FET-1002
1-1/2 FET15DC-01 FET15DP-01 1-1/2 50001-335-0160 FET-1502
2 FET20DC-01 FET20DP-01 2 50001-351-0160 FET-2002

Minneapolis, MN
6100 Series
Hydraulic Quick Couplings Threaded Connection
Connect Under Pressure Flush valves, high flow
6100 Series is a thread to connect, low spill coupling that can

be connected under pressure. Coupler and nipple bodies are
corrosion resistant brass. Couplers are available with a steel
hex nut or heavy duty wing nut sleeve. A connection indicator
groove on the nipple body indicates when the connection is
complete and the valves are fully open.
Features:
• Thread to connect operation
B Hydraulics
• Bonded valve seal stays in place under full pressure
connect and disconnect
• Visual connection indicator
• Rugged wing nut sleeve will withstand hammering to tighten
or loosen
• Optional flange for secure bulkhead mounting
• Special part numbers apply for CO2 transfer (contact QCD)
Applications:
• Submersible pumps
• Dump trailers
Performance 6100 Series (1/2" & 3/4")
Test Fluid: OIL 150 SUS • Engine test stands
100
• Bulk liquid transfer
90
80
70
3/4"
60
50
40
Specifications
30
1/2" 1-
20 Body Size 3/4 3/4 1 1 - 1/4
1/2
10
0
Dash Number -08 -12 -16 -20 -24
0 5 10 15 20 25 30 35 40 Rated Pressure (psi) *
Flow in USGPM
Female Half 3,000 3,000 3,000 2,750 2,000
Male Half 3,000 3,000 3,000 2,500 2,500
6100 Series (1", 1-1/4", 1-1/2")
Test Fluid: OIL 150 SUS Complete Coupling
3,000 3,000 3,000 2,750 2,500
70 Assembly
60
Rated Flow (gpm) 12 28 50 76 100
1-1/2" Temperature Range
50 -20° to +200°F
(std seals)
1-1/4"
40 Seal Material** Nitrile
1"
30
* Not recommended for continuous hydraulic impulse applications at
20 rated pressures.
10
** Contact the Division for alternate seal material availability.
0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
Flow in USGPM

Minneapolis, MN
6100 Series
Coupling Set with Wingnut
Body Part Number Part Number Thread Overall Connected

Weight (lbs.)
Size With Flange Without Flange Size Length
B Hydraulics
3/4 6100-08 6120-08 1/2-14 NPTF 5.20 2.12

3/4 6100-12 6120-12 3/4-14 NPTF 5.32 2.00
1 6100-16 6120-16 1-11 1/2 NPTF 5.99 3.19
1 1/4 6100-20 6120-20 1 1/4-11 1/2 NPTF 6.48 4.25
1 1/2 6100-24 6120-24 1 1/2-11 1/2 NPTF 6.80 6.13
Coupling Set with Hex Nut
Body Part Number Part Number Thread Overall Connected

Weight (lbs.)
Size With Flange Without Flange Size Length
3/4 6110-08 6130-08 1/2-14 NPTF 5.20 1.89
3/4 6110-12 6130-12 3/4-14 NPTF 5.20 1.83
1 6110-16 6130-16 1-11 1/2 NPTF 5.99 2.93
1 1/4 6110-20 6130-20 1 1/4-11 1/2 NPTF 6.33 4.12
1 1/2 6110-24 6130-24 1 1/2-11 1/2 NPTF 6.55 5.95
Dust Caps for Nipples Dust Plugs for Couplers

Body Body
Dust Cap - Nipples Dust Plug - Couplers
Size Size
3/4 6108-08 3/4 6109-08
1 6108-16 1 6109-16
1 1/4 6108-20 1 1/4 6109-20
1 1/2 6108-24 1 1/2 6109-24

Minneapolis, MN
6100 Series
Couplers - Wingnut
Body Part Number

Thread Size Overall Length Wrench Flats Wing Nut Weight (lbs.)
Size Brass
3/4 6125-08 1/2-14 NPTF 3.22 1.16 4.06 1.30
B Hydraulics
3/4 6125-12 3/4-14 NPTF 3.22 1.16 4.06 1.26
1 6125-16 1-11 1/2 NPTF 3.87 1.43 4.38 1.96
1 1/4 6125-20 1 1/4-11 1/2 NPTF 4.16 1.78 5.20 2.84
1 1/2 6125-24 1 1/2-11 1/2 NPTF 4.34 2.00 5.32 3.72
Couplers - Hex Nut
Body Part Number

Thread Size Overall Length Wrench Flats Hex Size Weight (lbs.)
Size Brass
3/4 6135-08 1/2-14 NPTF 3.22 1.16 1.75 1.07
3/4 6135-12 3/4-14 NPTF 3.22 1.16 1.75 1.07
1 6135-16 1-11 1/2 NPTF 3.87 1.43 2.13 1.89
1 1/4 6135-20 1 1/4-11 1/2 NPTF 4.16 1.78 2.50 2.56
1 1/2 6135-24 1 1/2-11 1/2 NPTF 4.34 2.00 2.75 3.15
Nipples
Part Number Part Number

Body Hex Size
Without Flange With Flange Thread Size Overall Length Wrench Flats Weight (lbs.)
Size
Brass Brass
3/4 6105-08 6115-08 1/2-14 NPTF 3.11 1.18 1.62 0.75
3/4 6105-12 6115-12 3/4-14 NPTF 3.23 1.18 1.62 0.76
1 6105-16 6115-16 1-11 1/2 NPTF 3.55 1.56 1.88 1.30
1 1/4 6105-20 6115-20 1 1/4-11 1/2 NPTF 3.71 1.88 2.13 1.65
1 1/2 6105-24 6115-24 1 1/2-11 1/2 NPTF 4.12 2.18 2.50 2.61
Mounting Flanges
Body Part Number Bolt Hole Bolt Circle
Size Steel Diameter Diameter
3/4 6107-08 (1 piece) .208 2.13
1 6107-16 (1 piece) .208 2.38
1 1/4 6107-20 (2 piece) .208 2.63
1 1/2 6107-24 (2 piece) .281 3.25

Minneapolis, MN
8200 Series
Hydraulic Quick Couplings Push/Pull/Breakaway Sleeve
Connect Under Pressure Accepts ISO 5675 nipples
Parker’s 8200 Series unique valve design allows connection

while either or both the coupler and nipple are under pressure.
Valves in both halves remain closed, opening only when
system pressure has been relieved on the female body and
then reapplied. This pressure sequence may be done with
either an open center or a closed center hydraulic system that
has a control valve.
Features:
• Accepts ISO 5675 universal tips
• Connect under system pressure on the coupler side
B Hydraulics
and residual pressure on the nipple side

• Sleeve designed to accommodate bracket mounting
• One-handed push-to-connect operation when coupler
is clamp mounted
• 1/2” body size couplers are compatible with 5001-4
and 5006-4 breakaway clamps
• Critical parts are hardened
• Tractors
• Mid-sized agricultural equipment
• Agricultural attachments requiring breakaway

Body
Rated Flow Rated Pressure Temperature Body Material Sleeve Type Seal Material
Size
1/2 12 gpm 3000 psi -40° F to +250° F Steel Push/pull/break away Nitrile
8200 Series (1/2")

Performance Test Fluid: Oil - 200 SUS
70
60
50
40
1/2"
30
20
10
0
0 2 4 6 8 10 12 14 16 18
Flow in USGPM
suffix W Ethylene Propylene seal material- EPR (Couplers) 8250-15W
suffix Y Fluorocarbon seal material (Couplers) 8250-15Y
suffix Z Neoprene seal material (Couplers) 8250-15Z

Minneapolis, MN
8200 Series
Hydraulic Quick Couplings Push/Pull/Breakaway
8200 Series Couplers - Female Thread
Coupler
Body Largest Wrench Weight Complete Coupling
Part Num- Port End Valve Type Length
Size Diameter Flats (lbs.) Part Number
ber
1/2 8250-4 1/2-14 NPSF Poppet 3.29 1.50 0.87 0.63 8200-4
B Hydraulics
1/2 8250-15 3/4-16 ORB Poppet 3.29 1.50 0.87 0.63 8200-15
1/2 8250-16 7/8-14 ORB Poppet 3.29 1.50 0.87 0.63 8200-16
8010 Series Nipples - Female Thread
Nipple
ber
1/2 8010-4 1/2-14 NPTF Ball 1.95 1.23 1.06 0.20 8200-4
1/2 8010-4P 1/2-14 NPTF Poppet 1.95 1.23 1.06 0.20 -
1/2 8010-15 3/4 -16 ORB Ball 1.95 1.23 1.06 0.20 8200-15
1/2 8010-15P 3/4 -16 ORB Poppet 1.95 1.23 1.06 0.20 -
1/2 8010-16 7/8 -14 ORB Ball 1.95 1.23 1.06 0.25 8200-16
1/2 8010-16P 7/8 -14 ORB Poppet 1.95 1.23 1.06 0.25 -
8200 Series Replacement Parts

Body
Part Number Description Material
Size
1/2 50005-211-0200 O-Ring Nitrile
Body Weight
Dust Plug (Coupler) Color/Material Dust Cap (Nipple)
Size (lbs.)
1/2 5205-4M Black Rubber 5209-4M .04
1/2 5005-4 Steel w/Chain 5009-4 .21

Minneapolis, MN
9200 Series
Hydraulic Quick Couplings Lever Actuated
The 9200 Series coupler allows zero pressure connection and

disconnection while either or both the coupler and nipple are under
pressure. A lever operated cam locks both coupler and nipple valves
in the open or closed position. “Closed”, the flow
is shut off at the coupler, allowing easy connect and disconnect.
Valves in the “Open” position are locked in place and unaffected by
hydraulic surges. Valves will automatically close if the coupling is
accidentally disconnected.
Features:
B Hydraulics
• Premier connect under pressure coupling

• Locked valves prevent flow checking
• Functionally can replace a double shut-off quick coupling and two
high pressure ball valves
• Industrial hydraulics
• Not recommended for use with gaseous or compressible media

Body Size Rated Flow Rated Pressure Temperature Body Material Sleeve Type Seal Material
1/2 12 gpm 3000 psi -40° F to +250° F Steel Push/pull/breakaway Nitrile
Performance: 9200 Series (1/2")

90
80
70
60
50
1/2"
40
30
20
10
0
0 2 4 6 8 10 12 14 16 18
Flow in USGPM

suffix W Ethylene Propylene seal material- EPR (Couplers) 9250-4-320W
suffix Y Fluorocarbon seal material (Couplers) 9250-4-320Y
suffix Z Neoprene seal material (Couplers) 9250-4-320Z

Minneapolis, MN
9200 Series
Hydraulic Quick Couplings Lever Actuated
B Hydraulics
Body Coupler Largest Wrench Weight
Port End Valve Type Orientation Length
Size Part Number Diameter Flats (lbs.)
1/2 9250-4-320* 1/2-14 NPTF Poppet Left hand – yellow grip 5.37 1.50 1.13 1.98
1/2 9250-6-320* 9/16-18 UNF Poppet Left hand – yellow grip 5.37 1.50 1.13 2.06
1/2 9250-334** 9/16-18 UNF Poppet Left hand – yellow grip 5.37 1.50 1.13 2.15
* -320 indicates lower sleeve spring force for easier connection when coupler is not mounted in a clamp.
** -334 couplers connect with ¼” ISO 7241-B series nipples.
8010 Series Nipples
Body Nipple Largest Weight

1/4 H2-63-T6* 9/16-18 ORB Poppet 1.54 1.01 0.88 0.10
1/2 8010-4 1/2-14 NPTF Ball 1.95 1.23 1.06 0.20
1/2 8010-4P 1/2-14 NPTF Poppet 1.95 1.23 1.06 0.20
1/2 8010-15 3/4-16 ORB Ball 1.95 1.23 1.06 0.20
1/2 8010-15P 3/4-16 ORB Poppet 1.95 1.23 1.06 0.20
1/2 8010-16 7/8-14 ORB Ball 1.95 1.23 1.06 0.25
1/2 8010-16P 7/8-14 ORB Poppet 1.95 1.23 1.06 0.25
* Connects with 9250-334 couplers
9200 Series Replacement Parts

Body Weight
Part Number Description
Size (lbs.)
1/2 50001-211-0260 Interface O-Ring .01
Body
Coupler Dust Cover Color/Material Nipple Dust Cap Weight (lbs.)
Size
1/2 9507-4-1 Black Rubber 5209-4M .04

Minneapolis, MN
5000 Series
Hydraulic Quick Couplings Threaded Actuation
The 5000 Series is an economical coupling that can be

connected under pressure where tools can be used to make
the connection. The coupler and nipple are connected and
then the valves are opened from tightening the threaded union
on the back of the coupler body. Unscrewing the body threads
will permit the valves to close and the coupler sleeve can be
retracted to release the nipple.
Features:
B Hydraulics
• Manual, threaded actuation, connect under pressure

coupling
• Lubrication systems
• Hydraulic tools
• Attachments
v
Body Size Rated Flow Rated Pressure Temperature Body Material Sleeve Type Seal Material
1/2 12 gpm 2500 psi -40° F to +250° F Steel Single Acting Nitrile
Performance: 5000 Series (1/2")

70
60
50
40
1/2"
30
20
10
0
0 2 4 6 8 10 12 14 16 18
Flow in USGPM

Minneapolis, MN
5000 Series
Hydraulic Quick Couplings Threaded Actuation
Coupler
ber
1/2 5050-4 1/2-14 NPTF Ball 2.88 1.52 1.25 2.58 5000-4
B Hydraulics
8010 Series Nipples
Complete Cou-
Body Nipple Largest Wrench Weight
Port End Valve Type Length pling
Size Part Number Diameter Flats (lbs.)
Part Number
1/2 8010-4 1/2-14 NPTF Ball 1.95 1.23 1.06 0.20 5000-4
1/2 8010-15 3/4-16 ORB Ball 1.95 1.23 1.06 0.20 –
1/2 8010-16 7/8-14 ORB Ball 1.95 1.23 1.06 0.25 –
5000 Replacement Parts 1/2
O-Rings - Nitrile 50001-211-0260
Body
Dust Plug (Coupler) Color/Material Dust Cap (Nipple) Weight (lbs.)
Size
1/2 5205-4M Black Rubber 5209-4M .04
1/2 5005-4 Steel w/Chain 5009-4 .21

suffix W Ethylene Propylene seal material- EPR (Couplers) 5050-4W
suffix Y Fluorocarbon seal material (Couplers) 5050-4Y
suffix Z Neoprene seal material (Couplers) 5050-4Z

Minneapolis, MN
75 Series
Connect Under Pressure Poppet valves, high pressure
The rugged 75 Series is an original Snap-tite design,

constructed for high pressure hydraulic service. Although
these couplings are used in a broad variety of heavy duty
applications, a primary usage is in oil fields and offshore
drilling. Available in sizes 3/4” through 4”, in steel or stainless
steel construction.
Features:
• Connect under residual pressure
• Thread-to-connect
B Hydraulics
• Up to 5,000 psi (345 bar) rated pressures

• Rugged steel construction with Zinc Trivalent
Chromate plating
• Stainless steel construction also available
• Nitrile is standard seal material, other options available
• DBP version is “Fire Safe” rated to API 16D (limited sizes)
• Cranes
• Power tongs
• Horizontal boring and dewatering
75 Series Pressure Ratings

Body Maximum Working Pressure (psi) Minimum Burst Pressure (psi) Maximum Working Pressure (psi)
Size Steel Only Steel Only 316 Stainless (Connected Only)
3/4 5000 20000 3000
1 5000 20000 3000
1-1/4 5000 15000 3000
1-1/2 5000 15000 3000
2 5000 15000 3000
2-1/2 3000 6000 -
3 3000 6000 -
4 400 1000 -
Burst pressures listed were taken at the point at which failure rendered the quick-disconnect inoperative. (Proof pressure equals 1-1/2 times the operating pressure).
NOTE: Pressure Ratings were established under static pressure conditions.
For impulse applications, multiply the above pressure ratings by .6 for approximate pressure ratings.
-Contact QCD
Body Size 3/4 1 1-1/4 1-1/2 2 2-1/2 3 4
Spillage (cc) 8 16 31 64 141 204 320 400
Air Inclusion 12 25 48 98 205 368 480 610
(cc)
Optional Seal Materials and Features for Couplers and Nipples (add code to part number)
suffix V Fluorocarbon seal material 75C12-12FV
suffix E Ethylene Propylene seal material (EPR) 75C12-12FE
suffix W Wrench flats on body (standard on 2-1/2” and larger, no code required) 75C12-12FW
suffix DBP “Fire Safe” BOP version (limited sizes, no alternate seal options) SB-75C12-12F-DBP

Minneapolis, MN
300 33.90
250 28.25
75 Series
200 MAXIMUM 22.60
RECOMMENDED

150
CONNECTING
PRESSURE 16.95
Connect Under Pressure 100

Poppet valves, high pressure
11.30
10000
600
800
3000
300
400
2500
7000
100
150
200
250
700
900
1000
5000
6000
8000
2000
500
9000
1500
4000
INTERNAL PRESSURE (psig)
Performance
Torque Values for Connecting Under Pressure Flow Chart

INTERNAL PRESSURE (bar)
Internal Pressure (bar) FLOW RATE
Flow Rate (lpm)
(LPM)
3028.00
2649.50
3406.50
1892.50
3785.00
413.79
689.66
206.90
482.76
344.83
620.69
551.72
172.41
275.86
137.93
103.45
2271.00
1135.50
1514.00
48.28
41.38
68.97
27.59
62.07
265.00
10.34
55.17
34.48
303.00
20.69
340.70
17.24
13.79
378.50
189.30
227.00
757.00
151.40
113.60
6.90
75.70
37.90
10000 1130.00
9000 1017.00 100 6.90
8000 904.00 90 6.21
7000 791.00 80 5.52
678.00 70
2"
6000 4.83
4"
2"
4"
1/
1"
1/
1/
60
2"
565.00 4.14
3"
5000
4"
3/
1-
1-
2-
4000 452.00 50 3.45
40 2.76
B Hydraulics
3000 339.00
(PSI) (psi)
2500 282.50 30 2.07
pounds)
2"
(inchpounds)
2000 226.00
PRESSURE
1-1/2"
TORQUE
20 1.38
Pressure LossLOSS
1-1/4"
Pressure Loss
1500 169.50
1"
Torque
3/4"
Torque (inch
1000 113.00
PRESSURE
900 101.70 10
(N.m.)
90.40 .69
800 9 .62
(N.m)
TORQUE
700 79.10 8 .55
LOSS
600 67.80 7 .48
(bar) (bar)
500 56.50 6 .41
400 5 .34
45.20
4 .27
300 33.90
250 28.25 3 .21
200 MAXIMUM 22.60
RECOMMENDED 2 .14
150 CONNECTING 16.95
PRESSURE
100 11.30
1 .07
10000
600
800
3000
300
400
2500
7000
100
900
1000
5000
6000
8000
150
200
250
700
2000
500
9000
1500
4000
300
500
700
900
70
400
800
10
40
80
600
20
30
60
90
100
200
1000
50
Internal Pressure
INTERNAL PRESSURE (PSI)
(psig)
FLOW
FlowRATE (gpm)
Rate (GPM)
8888 SSU(18
SSU (18 cSt)
cSt)oiloil
Ordering Guide
75 C 12 - 12 F 75 Series Dust Caps and Plugs
Options:
DBP*** = "Fire Safe" BOP
version 3/4" thru 2" steel,
1” and 1-1/4” stainless steel Body Dust Plug (Cou-
Dust Cap (Nipple)
Size pler)
Options:
W** = Wrench Flats on body 3/4 75MDP-12 75MDC-12
Seals: 1 75MDP-16 75MDC-16
Blank = Nitrile
V = Fluorocarbon 1-1/4 75MDP-20 75MDC-20
E = Ethylene Propylene Rubber 1-1/2 75MDP-24 75MDC-24
End Fitting Type: 2 75MDP-32 75MDC-32
F* = Female Pipe NPTF for Steel - NPT for 316 SST
EF = Female SAEa 2-1/2 75MDP-40 75MDC-40
RP = Female British Parallel BS2779 4 75MDP-64 75MDC-64
End Fitting Size:
12 = 3/4" 32 = 2"
16 = 1" 40 = 2-1/2"
20 = 1-1/4" 48 = 3" 75 Series Repair Kits
24 = 1-1/2" 64 = 4"
Body
Coupling Body Size: Coupler Kit Nipple Kit
Size
12 = 3/4" 32 = 2"
16 = 1" 40 = 2-1/2" 3/4 75C12-SPK 75N12-SPK
20 = 1-1/4" 48 = 3"
1 75C16-SPK 75N16-SPK
24 = 1-1/2" 64 = 4"
1-1/4 75C20-SPK 75N20-SPK
Coupling Half:
C = Coupler 1-1/2 75C24-SPK 75N24-SPK
*For sizes up to 3", NPTF threads. For sizes over 3", NPT threads.
N = Nipple
**Not available on 2" EF coupler. Standard on 2-1/2" and larger 2 75C32-SPK 75N32-SPK
Series: sizes (code not needed).
75 ***DBP available in 3/4" through 2" sizes steel material, 1” and 2-1/2 75C40-SPK 75N40-SPK
1-1/4”
Material: stainless steel. 4 75C64-SPK 75N64-SPK
Blank = Steel plated
†
Seal material code not applicable with DBP option-leave blank.
Each kit contains a valve assembly, spring and guide stop.
S = 316 Stainless Steel Note: Not all configurations are standard product offering. Consult QCD for “DBP” option seals.
Contact QCD for price and delivery.

Minneapolis, MN
75 Series
Connect Under Pressure Poppet valves, high pressure
75 Series Couplers
3/4” size
Part Part
B Hydraulics
Number Port End Number Port End

Steel 316 Stainless Steel
3/4 75C12-12F 3/4-14 NPSF S75C12-12F 3/4-14 NPSF 2.84 2.06 1.31
3/4 75C12-12F-DBP 3/4-14 NPSF - - 2.84 2.06 N/A
1 75C16-16F 1-11-1/2 NPSF S75C16-16F 1-11-1/2 NPSF 3.45 4.25 1.69
1 75C16-16F-DBP 1-11-1/2 NPSF S75C16-16F-DBP 1-11-1/2 NPSF 3.45 4.25 N/A
1-1/4 75C20-20F 1-1/4-11-1/2 NPTF S75C20-20F 1-1/4-11-1/2 NPT 4.40 4.75 2.00
S75C20-20F-
1-1/4 75C20-20F-DBP 1-1/4-11-1/2 NPTF 1-1/4-11-1/2 NPT 4.40 4.75 N/A
DBP
1-1/2 75C24-24F 1-1/2-11-1/2 NPTF S75C24-24F 1-1/2-11-1/2 NPT 5.04 5.75 2.25
1-1/2 75C24-24F-DBP 1-1/2-11-1/2 NPTF - - 5.04 5.75 N/A
2 75C32-32F 2-11-1/2 NPT S75C32-32F 2-11-1/2 NPT 6.07 6.75 3.00
2 75C32-32F-DBP 2-11-1/2 NPT - - 6.07 6.75 3.00
2-1/2 75C40-40F 2-1/2-8 NPTF S75C40-40F 2-1/2-8 NPTF 5.29 8.00 3.50
3 75C48-48F 3-8 NPTF S75C48-48F 3-8 NPTF 5.84 8.50 4.25
75 Series Nipples
Part Part
Number Port End Number Port End
Steel 316 Stainless Steel
3/4 75N12-12F 3/4-14 NPSF S75N12-12F 3/4-14 NPSF 3.27 1.75 1.56
3/4 75N12-12F-DBP 3/4-14 NPSF - - 3.27 1.75 N/A
1 75N16-16F 1-11-1/2 NPSF S75N16-16F 1-11-1/2 NPSF 4.17 2.25 2.00
1 75N16-16F-DBP 1-11-1/2 NPSF S75N16-16F-DBP 1-11-1/2 NPSF 4.17 2.25 N/A
1-1/4 75N20-20F 1-1/4-11-1/2 NPTF S75N20-20F 1-1/4-11-1/2 NPT 5.36 2.62 2.38
S75N20-20F-
1-1/4 75N20-20F-DBP 1-1/4-11-1/2 NPTF 1-1/4-11-1/2 NPT 5.36 2.62 N/A
DBP
1-1/2 75N24-24F 1-1/2-11-1/2 NPTF S75N24-24F 1-1/2-11-1/2 NPT 5.97 3.25 2.88
1-1/2 75N24-24F-DBP 1-1/2-11-1/2 NPTF - - 5.97 3.25 N/A
2 75N32-32F 2-11-1/2 NPT S75N32-32F 2-11-1/2 NPT 7.05 4.00 3.50
2 75N32-32F-DBP 2-11-1/2 NPT - - 7.05 4.00 N/A
2-1/2 75N40-40F 2-1/2-8 NPTF S75N40-40F 2-1/2-8 NPTF 7.46 5.00 3.50
3 75N48-48F 3-8 NPTF S75N48-48F 3-8 NPTF 8.26 6.00 4.25
Contact QCD for additional sizes and end configurations.

Minneapolis, MN
71 Series
High Pressure Push-to-Connect
Parker’s 71 Series, formerly Snap-tite couplings are designed

for working pressures up to 10,000 psi. Available in a variety
of materials and with a wide range of body sizes. Air inclusion
and fluid loss are minimal with the flush face valves. Large flow
chambers in the body and an exclusive valve design permit
superior flow while maintaining low pressure drop.
Features:
• Flush face/Non-spill
• Push-to-connect
B Hydraulics
• Heavy duty construction
• Designed for up to 10,000 psi (690 bar) working pressures
• Variety of materials
• Superior flow and low pressure drop
• Sleeve lock option to protect against accidental
disconnection.
• Off-shore drilling
71 Series Pressure Ratings

Steel 316 Stainless Steel High Pressure Stainless Steel
Body
Size Maximum Minimum Maximum Minimum Maximum Minimum
Working (psi) Burst* (psi) Working (psi) Burst* (psi) Working (psi) Burst* (psi)
1/4 10,000 20,000 5,000 12,500 10,000 20,000
1
3/8 x 1/4 10,000 20,000 5,000 12,500 10,000 20,000
3/8 10,000 20,000 5,000 12,500 10,000 20,000
2
3/8 x 1/2 10,000 20,000 5,000 12,500 10,000 20,000
1/2 10,000 20,000 5,000 12,500 10,000 20,000
3/4 7,500 15,000 5,000 12,500 7,500 15,000
1 7,500 15,000 4,000 10,000 7,500 15,000
3
1 x 1-1/4 7,500 15,000 4,000 10,000 7,500 15,000
4
2 x 1-1/2 5,000 10,000 3,000 6,000 5,000 10,000
2 5,000 10,000 3,000 6,000 5000 10,000
1 2 3 4
Unit is 3/8" with 1/4" end fitting. Unit is 3/8" with 1/2" end fitting, 1" unit with 1-1/4" end fitting, and 2" unit with 1-1/2" end fitting.
*NOTE: Pressure Ratings were established under static pressure conditions. For high impulse applications, consult QCD.
Specifications
Body Size 1/4 3/8 x 1/41 3/8 3/8 x 1/22 1/2 3/4 1 1 x 1-1/43 2 x 1-1/44 2
Spillage (cc) .02 .02 .02 .02 .03 .06 .10 .10 5.25 5.25
Air Inclusion (cc) .01 .02 .02 .02 .03 .04 .06 .06 30.50 30.50
Maximum Recommended Connect/Disconnect Pressures

Body Size 1/4 3/8, 1/2, 3/4 1, 1-1/4 1-1/2, 2
Pressure 300 150 75 0

Minneapolis, MN
71 Series
Performance
Sizes 1/4 thru 1-1/4 Sizes 1-1/2 and 2

Flow FLOWRate
Flow RATE (lpm)
(LPM)
FLOWRate
RATE(LPM)
(lpm)
11355.00
3406.50
3028.50
2649.50
3785.00
1892.50
7570.00
2271.00
1135.50
1135.50
1514.00
265.00
340.70
302.80
378.50
340.70
302.80
757.00
189.30
265.00
378.50
227.10
189.30
757.00
113.60
227.10
151.40
151.40
113.60
75.70
30.28
26.50
34.07
37.85
18.93
22.71
75.70
11.36
15.14
37.85
3.79
7.57
300 20.69 300 20.69
200 13 . 7 9 200 13 . 7 9
100 6.90
B Hydraulics
100 6.90
90 6 . 21 90 6 . 21
80 5.52 80 5.52
70 4.83 70 4.83
60 4 . 14 60 4 . 14
50 3.45 50 3.45
(psi)
PRESSURE
(psi)
PRESSURE
40 2.76 40 2.76
Pressure LOSS
(psi)
(psi)
PressureLOSS
4"
LOSS
LOSS
2"
30 2.07 30 2.07
1/
4"
Loss
Loss
2"
8"
Maximum
4"
1-
Maximum
&
1/
20 1.38 20 1.38
Recommended
PRESSURE
Recommended
PRESSURE
1/
3/
3/
2"
Loss (bar)
Loss(bar)
Flow Rate
Flow Rate
&
Pressure
Pressure
1/
1"
(bar)
10 .69 10 .69
1-
9 .62 9 .62
8 .55 8 .55
7 .48 7 .48
6 . 41 6 . 41
5 .34 5 .34
4 .27 4 .27
3 . 21 3 . 21
2 . 14 2 . 14
1 .07 1 10 .07
40
70
80
100
600
700
1000
300
2000
3000
20
30
60
900
90
500
50
400
800
200
1
40
7
100
3
90
50
60
6
4
30
70
80
2
8
10
20
200
300
Flow Rate
FLOW RATE(GPM)
(gpm) Flow Rate
FLOW RATE(GPM)
(gpm)
Hydraulic Fluid
HYDRAULIC FLUID Hydraulic Fluid
HYDRAULIC FLUID
Gallons per minute (gpm) in US gallons. Test Media MIL-H-6083 Hydraulic Fluid at 90°F ± 5°F (+32°C ± 1.5°C) sg .83
Ordering Guide
71-3 C 4 - 4 F
Options:
SL = Sleeve Lock
Seals:
Standard Seal = Nitrile
V = Fluorocarbon
E = Ethylene Propylene
M = MHO
End Fitting Type:
F* = Female NPTF
EF = Female SAE
RP = Female British Parallel BS2779
Autoclave cone & threaded fittings available
(consult QCD)
End Fitting Size:
4 = 1/4" 16 = 1"
6 = 3/8" 20 = 1-1/4"
8 = 1/2" 24 = 1-1/2"
12 = 3/4" 32 = 2"
Coupling Body Size:
4 = 1/4" 12 = 3/4"
6 = 3/8" 16 = 1"
8 = 1/2" 32 = 2"
Coupling Half:
C = Coupler
N = Nipple
Series:
71 = 1-1/2" & 2" Nipples Only
71-1 = 1-1/2" & 2" Couplers Only
71-3 = 1/4" thru 1-1/4" Both
Material:
Blank = Steel, zinc trivalent plating * For sizes up to 1" NPTF threads in steel.
S = 316 Stainless Steel For sizes up to 1" NPSF threads in stainless steel.
SH = High Pressure Stainless Steel For sizes over 1" NPT threads.

Minneapolis, MN
71 Series
71 Series Couplers
Part Part Part Number

Number Port End Number High Pressure Port End
Size (in) Dia. Flats
Steel 316 Stainless Steel Stainless Steel
B Hydraulics
1/4 71-3C4-4F 1/4 - 18 NPTF S71-3C4-4F SH71-3C4-4F 1/4 - 18 NPTF 1.96 1.19 0.94
1/4 71-3C4-4EF 7/16 - 20 UNF S71-3C4-4EF - 7/16 - 20 UNF 1.96 1.19 0.94
3/8 71-3C6-4F 1/4 - 18 NPTF - - - 2.36 1.56 1.19
3/8 71-3C6-6F 3/8 - 18 NPTF S71-3C6-6F SH71-3C6-6F 3/8 - 18 NPSF 2.36 1.56 1.19
3/8 71-3C6-6EF 9/16 - 18 UNF S71-3C6-6EF SH71-3C6-6EF 9/16 - 18 UNF 2.36 1.56 1.19
3/8 71-3C6-8F 1/2 - 14 NPTF S71-3C6-8F - 1/2 - 14 NPSF 2.57 1.56 1.19
1/2 71-3C8-8EF 3/4 - 16 UNF S71-3C8-8EF - 3/4 - 16 UNF 2.77 1.88 1.50
3/4 71-3C12-12EF 1-1/16 - 12 UNF S71-3C12-12EF - 1-1/16 - 12 UNF 3.05 2.25 1.75
1 71-3C16-16F 1 - 11-1/2 NPTF S71-3C16-16F SH71-3C16-16F 1 - 11-1/2 NPSF 3.32 2.63 2.00
1 71-3C16-16EF 1-5/16 - 12 UNF S71-3C16-16EF - 1-5/16 - 12 UNF 3.32 2.63 2.00
1 71-3C16-20F 1-1/4 - 11-1/2 NPT S71-3C16-20F - 1-1/4 - 11-1/2 NPT 3.32 2.63 2.00
1 71-3C16-20EF 1-5/8 - 12 UNF S71-3C16-20EF - 1-5/8 - 12 UNF 3.32 2.63 2.00
2 71-1C32-24F 1-1/2 - 11-1/2 NPT - - - 6.21 4.50 3.38
2 71-1C32-24EF 1-7/8 - 12 UNF - - - 6.21 4.50 3.38
2 71-1C32-32F 2 - 11-1/2 NPT - - - 6.21 4.50 3.38
2 71-1C32-32EF 2-1/2 - 12 UNF - - - 6.21 4.50 3.38
NOTE:
1. The 71-3 style couplers and nipples are interchangeable with the previous design couplers and nipples in sizes 3/8”, 1/2” and 3/4”.
2. Old style 1” couplers and nipples (71-2C16 and 71-2N16) are not interchangeable with the 71-3 design. Contact QCD for information.
3. Internal components of S71 and SH71 couplers and nipples are not all 316 stainless steel. Contact QCD for details.
4. Prop 65 Warning does not apply to stainless steel part numbers.
71 Series Dust Caps
Body Dust Cap (Cou-

Dust Cap (Nipple)
Size pler)
1/4 71-3PCC-4 71-3PNC-4
3/8 71-3PCC-6 71-3PNC-6
1/2 71-3PCC-8 71-3PNC-8
3/4 71-3PCC-12 71-3PNC-12
1 71-3PCC-16 71-3PNC-16

Minneapolis, MN
71 Series
71 Series Nipples
Part Part Part Number

Number Port End Number High Pressure Port End
Size (in) Dia. Flats
Steel 316 Stainless Steel Stainless Steel
1/4 71-3N4-4F 1/4 - 18 NPTF S71-3N4-4F SH71-3N4-4F 1/4 - 18 NPTF 1.84 0.89 0.81
B Hydraulics
1/4 71-3N4-4EF 7/16 - 20 UNF S71-3N4-4EF - 7/16 - 20 UNF 1.84 0.89 0.81
3/8 71-3N6-4F 1/4 - 18 NPTF - - - 1.84 1.18 1.00
3/8 71-3N6-6F 3/8 - 18 NPTF S71-3N6-6F SH71-3N6-6F 3/8 - 18 NPSF 2.32 1.18 1.00
3/8 71-3N6-6EF 9/16 - 18 UNF S71-3N6-6EF SH71-3N6-6EF 9/16 - 18 UNF 2.32 1.18 1.00
3/8 71-3N6-8F 1/2 - 14 NPTF - - - 2.57 1.65 1.25
1/2 71-3N8-8EF 3/4 - 16 UNF S71-3N8-8EF SH71-3N8-8EF 3/4 - 16 UNF 2.38 1.65 1.50
3/4 71-3N12-12EF 1-1/16 - 12 UNF S71-3N12-12EF - 1-1/16 - 12 UNF 2.96 1.92 1.75
1 71-3N16-16F 1 - 11-1/2 NPTF S71-3N16-16F SH71-3N16-16F 1 - 11-1/2 NPSF 3.23 2.09 1.88
1 71-3N16-16EF 1-5/16 - 12 UNF S71-3N16-16EF - 1-5/16 - 12 UNF 3.23 2.09 1.88
1 71-3N16-20F 1-1/4 - 11-1/2 NPT S71-3N16-20F - 1-1/4 - 11-1/2 NPT 3.23 2.20 1.88
1 71-3N16-20EF 1-5/8 - 12 UNF S71-3N16-20EF - 1-5/8 - 12 UNF 3.23 2.20 1.88
2 71N32-24F 1-1/2 - 11-1/2 NPT - - - 4.50 3.50 3.25
2 71N32-24EF 1-7/8 - 12 UNF - - - 4.50 3.50 3.25
2 71N32-32F 2 - 11-1/2 NPT - - - 4.50 3.50 3.25
NOTE:
1. The 71-3 style couplers and nipples are interchangeable with the previous design couplers and nipples in sizes 3/8”, 1/2” and 3/4”.
2. Old style 1” couplers and nipples (71-2C16 and 71-2N16) are not interchangeable with the 71-3 design. Contact QCD for information.
3. Internal components of S71 and SH71 couplers and nipples are not all 316 stainless steel. Contact QCD for details.
4. Prop 65 Warning does not apply to stainless steel part numbers.

Minneapolis, MN
3000 Series
High Pressure Steel body, polyurethane seal
The 3000 Series coupling are designed for high pressure

applications. The coupler sleeve and nipple body must be
manually threaded together to make the connection.
Features:
• Manual threaded connection and actuation
• Hard, chrome alloy ball valves
• Polyurethane interface seal resists high pressure extrusion
• Threaded retainer provides a positive valve stop
B Hydraulics
• Hydraulic rams
• Portable hydraulic tools
• Crimping equipment

1/4 3 Steel Thread to connect Polyurethane
10,000 -22° F to +230° F
3/8 6 Steel Thread to connect Polyurethane
Performance: 3000 Series (1/4", 3/8")

160
140
120
3/8"
100
80
1/4"
60
40
20
0
0 1 2 3 4 5 6 7 8 9
Flow in USGPM

Minneapolis, MN
3000 Series
High Pressure Steel body, polyurethane seal

Port End Valve Type Length Wrench Flats Weight (lbs.)
1/4 3050-2 1/4-18 NPTF (Male) Ball 2.38 1.13 0.81 0.25
B Hydraulics
3/8 3050-3 3/8-18 NPTF (Male) Ball 2.38 1.38 1.00 0.49
3/8-18 NPTF (Fe-
3/8 3050-3-231 Ball 2.38 1.38 1.00 0.49
male)
3000 Series Nipples
Body Nipple Valve Largest

Port End Length Wrench Flats Weight (lbs.)
Size Part Number Type Diameter
1/4-18 NPTF (Fe-
1/4 3010-2 Ball 1.29 1.13 0.88 0.14
male)
3/8-18 NPTF (Fe-
3/8 3010-3 Ball 1.58 1.25 0.94 0.23
male)
3/8 3010-3-230 3/8-18 NPTF (Male) Ball 2.31 1.25 1.00 0.30
3000 Series Replacement O-Rings 3000 Series Dust Caps and Plugs
Body
Material Part Number Durometer
Size
1/4 Polyurethane 50001-114-0296 90
3/8 Polyurethane 50001-210-0296 90
Body Dust Cap Dust Plug Weight
Color/Material
Size (Nipple) (Coupler) (lbs.)
1/4 3009-2 Steel 3005-2 .02
3/8 3009-3 Steel 3005-3 .04

Minneapolis, MN
TC Series
Hydraulic Quick Couplings Manual Sleeve
High Pressure Sleeve lock, fluorocarbon seal
TC Series couplings are used in high pressure applications

with hydraulic and mechanical shock. Steel coupler sleeves
and nipple bodies are hardened for resistance to damage.
Fluorocarbon seals along with PTFE back up rings provide
reliable sealing in high pressures. Available in 3/8 inch
size only, with sleeve lock to guard against accidental
disconnection.
Features:
• Rated pressure up to 10,000 psi
• Manual sleeve operation
B Hydraulics
• Fluorocarbon seals
• Standard sleeve lock guards against accidental
disconnection
• Positive valve stop prevents flow checking
Applications:
Performance TC Series (3/8")
• Hydraulic jacking and house moving equipment
100 • Construction equipment
90 • Railway maintenance
80
70 Specifications
60 Body Size 3/8

50 Rated Pressure (psi) 10,000
3/8"
40
Rated Flow (gpm) 6
30
-15° to +400° F
20 seals)
10 TC Series Dust Plug/Caps
0 TR-37
0 1 2 3 4 5 6 7 8 9
Flow in USGPM
Coupler
Body
Part Number Thread Size Overall Length Largest Diameter Wrench Flats Weight (lbs.)
Size
3/8 TC-371 3/8-18 NPSF 2.48 1.25 0.94 0.43
Nipple
Body Largest Diam-

Part Number Thread Size Overall Length Exposed Length Wrench Flats Weight (lbs.)
Size eter
3/8 TC-372 3/8-18 NPSF 1.82 0.66 1.08 0.94 0.14

Minneapolis, MN
1141 Series
Hydraulic Quick Couplings Threaded Connect Under Pressure
High Pressure Stainless body, polyurethane seal
1141 Series are general purpose couplings that connect

under pressure for high pressure applications. The 1/4 inch
stainless steel coupling connects together with a threaded
brass sleeve. Polyurethane seals resist extrusion and
abrasion.
Features:
• 303 stainless steel body
• Rated pressure up to 10,000 psi and 17,000 psi
intermittent pressure
B Hydraulics
• Small diameter mating seal keeps separation forces to

a minimum, allowing easier threaded connection and
disconnection at pressures up to 5,000 psi
• Polyurethane seals to resist extrusion and abrasion
• Self locking threads guard against accidental
disconnection
• Visual connection indicator – when fully coupled, sleeve
edge is flush with the end of the male thread
Specifications
Body Size 1/4
• Dust caps and plugs included
Rated Pressure (psi) 10,000
Rated Connect-Under-Pressure Capability
5,000 Applications:
(psi)
• Off shore equipment
Rated Flow (gpm) 3
• Hydraulic lines in corrosive environments
Temperature Range (Polyurethane seals) -30° to +180° F
Vacuum Test 20 in/Hg
Torque to connect at 1000 psi 47 in/lbs.
Coupler
Body
Part Number Thread Size Length Sleeve Hex Wrench Flat Weight (lbs.)
Size
1/4 1141-62 1/4-18 NPTF 2.75 1.00 0.88 0.40
Nipple
Body
Part Number Thread Size Length Wrench Flat Weight (lbs.)
Size
1/4 1141-63 1/4-18 NPTF 2.00 0.88 0.26

Minneapolis, MN
ST Series
Hydraulic Quick Couplings Straight-thru Interface
High Flow Non-valved, manual sleeve
ST Series non-valved couplings provide maximum flow and

low pressure drop. The smooth, open bore allows easy
cleaning in applications where the same lines are used for
more than one media.
Features
• Steel nipples are case hardened for resistance to Brinelling
• Functionally interchanges with similar straight-through
design couplings
B Hydraulics
• Standard Nitrile seals
• Material options available
• Sleeve-Lok option available
Applications:
• High pressure water
• Steam washers
• Carpet cleaners
Specifications
Body Rated Pressure (psi) Rated Pressure (psi) Rated Pressure (psi) Temperature Range Rated
Size Brass Coupler/Nipple Brass Coupler/Steel Nipple 303 SS Coupler/Nipple (standard seals) Flow
1/8 2500 2600 4200 3
1/4 5200 5500 6700 6
3/8 2700 3500 5500 12
1/2 2200 2700 3000 12
-40º to +250º F
3/4 1700 2700 3000 28
1 1200 2000 1700 50
1-1/4 1700 – – 76
1-1/2 1400 – – 100
Performance ST Series (1/8", 1/4", 3/8", 1/2") ST Series (3/4", 1", 1-1/4")
12
5
10 1"
1/8" 4
8
3/4" 1-1/4"
3
6
3/8"
1/2"
2
4
1/4"
2 1
0 0
0 2 4 6 8 10 12 14 16 18 0 20 40 60 80 100

Minneapolis, MN
ST Series
ST Series Couplers - Female Pipe Thread
Body Brass 303 Stainless Largest Wrench Brass Stainless

Port End Length
Size Part Number Part Number* Diameter Flats Weight (lbs.) Weight (lbs.)
B Hydraulics
1/8 BST-1 SST-1 1/8-27 NPTF 1.06 0.69 0.56 0.06 0.05
1/4 BST-2 SST-2 1/4-18 NPTF 1.54 0.94 0.81 0.17 0.15
3/8 BST-3 SST-3 3/8-18 NPTF 1.64 1.16 1.00 0.26 0.24
1/2 BST-4 SST-4 1/2-14 NPTF 1.98 1.30 1.13 0.40 0.37
3/4 BST-6 SST-6 3/4-14 NPTF 2.15 1.66 1.44 0.62 0.57
1 BST-8 SST-8 1-11 1/2 NPTF 2.43 2.02 1.75 0.99 0.93
1-1/4 BST-10** – 1 1/4-11 1/2 NPTF 2.44 2.51 2.00 1.38 –
1-1/2 BST-12** – 1 1/2-11 1/2 NPTF 2.88 3.00 2.50 2.43 –
** Steel sleeves
ST Series Couplers - Male Pipe Thread
Body Brass 303 Stainless Largest Wrench Brass Stainless

Port End Length
Size Part Number Part Number* Diameter Flats Weight (lbs.) Weight (lbs.)
1/8 BST-1M SST-1M 1/8-27 NPTF 1.06 0.69 0.56 0.05 0.05
1/4 BST-2M SST-2M 1/4-18 NPTF 1.69 0.94 0.81 0.13 0.16
3/8 BST-3M SST-3M 3/8-18 NPTF 1.75 1.16 1.00 0.25 1.16
1/2 BST-4M SST-4M 1/2-14 NPTF 1.94 1.30 1.13 0.34 1.30
3/4 BST-6M SST-6M 3/4-14 NPTF 2.17 1.66 1.44 – 1.66
1 BST-8M SST-8M 1-11 1/2 NPTF 2.53 2.02 1.75 0.85 2.02

suffix -SL Sleeve-Lok (Couplers) SST-3M-SL
suffix W Ethylene Propylene seal material- EPR (Couplers) SST-3MW
suffix Y Fluorocarbon seal material (Couplers) SST-3MY
suffix Z Neoprene seal material (Couplers) SST-3MZ

Minneapolis, MN
ST Series
ST Series Nipples- Female Pipe Thread
303
Body Brass Weight. Steel Weight. Weight. Largest Wrench
B Hydraulics
Stainless Port End Length
Size Part No. (lbs.) Part No. (lbs.) (lbs.) Diameter Flats
Part No.*
1/8 BST-N1 0.03 ST-N1 0.03 SST-N1 0.02 1/8-27 NPTF 0.98 0.65 0.56
1 BST-N8 0.52 ST-N8 0.49 SST-N8 0.48 1-11 1/2 NPTF 2.35 1.88 1.63
1-1/4 BST-N10 0.85 – – – – 1 1/4-11 1/2 NPTF 2.38 2.31 2.00
1-1/2 BST-N12 1.45 – – – – 1 1/2-11 1/2 NPTF 2.81 2.74 2.38
ST Series Nipples- Male Pipe Thread
303 Largest
Body Brass Weight. Steel Weight. Weight. Wrench
Stainless Port End Length Diam-
Size Part No. (lbs.) Part No. (lbs.) (lbs.) Flats
Part No.* eter
1/8 BST-N1M 0.02 ST-N1M 0.02 SST-N1M 0.02 1/8-27 NPTF 1.04 0.51 0.44
1 BST-N8M 0.46 ST-N8M 0.43 SST-N8M 0.43 1-11 1/2 NPTF 2.51 1.59 1.38
1-1/4 BST-N10M 0.96 – – – – 1 1/4-11 1/2 NPTF 2.85 2.17 1.88
1-1/2 BST-N12M 1.46 – – – – 1 1/2-11 1/2 NPTF 3.25 2.45 2.13
Replacment Parts
ST Series Couplers
Body Size O-rings - Nitrile
1/8 50001-010-0010
1/4 50001-110-0010
3/8 50001-112-0010
1/2 50001-114-0010
3/4 50001-212-0010
1 50001-217-0010

Minneapolis, MN
1163 Series
Hydraulic Quick Couplings Water Hose Connectors
Parker Water Service Quick Couplings add convenience and

efficiency wherever water hoses are frequently connected
and disconnected. The durable 4-ball locking mechanism
provides a secure connection.
Features:
• Brass and stainless steel construction
• Nitrile seals
B Hydraulics
• Garden hoses
• Wash down systems
• Mobile water tank lines
Specifications
Body
Rated Pressure (psi) Rated Flow (gpm) Temperature Range (std seals)
Size
3/4 200 28 -40º to +250º F
Coupler

Port End Length Weight (lbs.)
3/4 1163-60 3/4-11 1/2 NH 1.16 1.21 0.12
Nipple
Body Nipple
Port End Overall Length Exposed Length Weight (lbs.)
Size Part Number
3/4 1163-61 3/4-11 1/2 NH 1.25 0.50 0.08
Coupler Replacement Seal

Part Number Material
4730001 Nitrile

Minneapolis, MN
HO Series
Hydraulic Quick Couplings Non-Valved, High Pressure
High Flow Manual sleeve, sleeve lock
HO series couplings are high flow, high pressure, steel

couplings for a wide variety of applications. Electroless nickel
plating provides corrosion resistance.
Features:
• Steel material with electroless nickel plating
• Nitrile seals with PTFE back up ring
• No valving, unrestricted flow
• Standard sleeve lock guards against accidental disconnection
• Rated pressures up to 15,000 psi
B Hydraulics
Applications:
• Paper and pulp processing
• Refinery systems
• Testing systems
Specifications
Body Size 1/4 3/8 1/2
Rated Pressure (PSI) 15,000 15,000 10,000
Rated Flow (GPM) 3 6 12
-40° to +250°F
seals)
Couplers
Body Dust Plug

Part Number Thread Size Overall Length Largest Diameter Wrench Flats Weight (lbs.)
Size Rubber
1/4 HO-251-4FP 1/4-18 NPTF 1.67 1.06 0.94 0.24 TR-37
3/8 HO-371-6FP 3/8-18 NPTF 1.67 1.06 0.94 0.22 TR-37
1/2 HO-501-8FP 1/2-14 NPTF 2.03 1.62 1.25 0.52 DP-50
suffix -E5 Ethylene Propylene seal material- EPR (Couplers) HO-371-6FP-E5
suffix -E4 Fluorocarbon seal material (Couplers) HO-371-6FP-E4
suffix -E12 Neoprene seal material (Couplers) HO-371-6FP-E12
.To select proper seal materials, see Fluid Compatibility Chart or contact QCD Contact QCD for availability..
Nipples
Body Exposed Largest Diam- Dust Plug

Part Number Thread Size Overall Length Wrench Flats Weight (lbs.)
Size Length eter Rubber
1/4 HO-252-4FP 1/4-18 NPTF 1.40 0.66 0.94 0.81 0.10 TR-37
3/8 HO-372-6FP 3/8-18 NPTF 1.44 0.70 1.08 0.94 0.12 TR-37
1/2 HO-502-8FP 1/2-14 NPTF 2.03 0.86 1.30 1.12 0.26 DP-50

Minneapolis, MN
Moldmate Series
Hydraulic Quick Couplings Coolant Line Connectors
Mold Coolant Brass body, silicone seal
Moldmate series couplings are specifically designed for connecting

coolant lines to molds and dies on injection molding machinery and die
casting equipment. These couplings significantly reduce downtime, by
providing a quick and easy way to connect and disconnect lines during
mold changes.
Features:
• Rated pressure is 200 psi

• Valved and unvalved options. Valved couplers have silver colored
sleeves
B Hydraulics
• Brass material with standard silicone interface seals are

compatible with water and water glycol fluids. Valved versions
have a fluorocarbon seal on the poppet.
• Optional fluorocarbon seal for use with oil based media
• Short nipples can be installed recessed below the mold surface
Performance Moldmate Series (1/4", 3/8", 1/2") enabling more efficient storage and protecting the nipple from
Test Fluid: Water (Straight Coupler) damage
50
• Standard and Push-Lok hose barb ends are available in straight,
45
1/4" Valved 45 or 90 degree configurations
40
3/8" Valved • Manual sleeve operation
35
• Extension nipples are offered in several lengths
30
1/4" Non-valved
25
Applications:
20
3/8" Non-valved
15
• Mold coolant lines
1/2" Non-valved
10 • Die casting equipment
5
0
Special Order Information:
0 2 4 6 8 10 12 14 16 18
Flow in USGPM Standard seal material is Silicone and is compatible with water
and water glycol fluids commonly used in heat transfer systems.
Guidelines for Selection and Use: Fluorocarbon seals are available for use with oil-based media.
Non-valved couplers provide maximum flow for efficient cooling. To specify a Fluorocarbon seal, add the suffix “Y” to the standard
Valved couplers shut off automatically when disconnected. Valved moldmate part number, thus: PC206Y.
couplers can be used with either valved or non-valved nipples. A
valved nipple, however, must be used with a valved coupler.
Moldmate couplings are rated for 200 psi max pressure. Most
thermoplastic and thermoset heat transfer systems have pumps
which provide relatively high flow rates at low pressures. Water and
water glycol systems usually have capacities ranging from 10 to 40 Specifications
gpm with most from 10 to 15 gpm. Normal medial opening pressures
Body Size 1/4 3/8 1/2
are 20 to 60 psi for these systems. Heat transfer systems using oil
generally operate from 10 to 30 psi. However, their flow rates are Rated Pressure (psi) 200
usually much higher, requiring the total volume of oil to be circulated Rated Flow (gpm) 3 6 12
at least once per minute.
The number of hose connections in a single mold system results in

a cumulative pressure drop. Please note the Pressure Drop vs. Flow Material Temperature Range
Rate chart provided, to select the appropriate size.
Standard Silicone seal -20° to +400° F
Temperature is another important consideration. Parker Moldmate *Optional Fluorocarbon seal -15° to +400° F
couplings with the standard silicone seal have a temperature
capability of -90° to +400°F. Rapid deterioration of the seal and * For use with oil based media only
leakage may result if used beyond these limits.
External conditions of temperature, corrosive atmospheres, and

other abnormalities may affect coupling performance and must be
considered when selection is made. Consult QCD with questions.

Minneapolis, MN
Moldmate Series
Couplers - Straight
Non-Valved Push-Lok Hose Barb Valved Non-Valved Standard Hose Barb Valved
Part Number
Part Number
Body Weight Brass - Weight Hose Overall Largest Overall Largest Wrench
Brass
Size (lb.) Valved (lb.) I.D. Length Diameter Length Diameter Flats
Non-Valved
B Hydraulics
(silver sleeve)
Non-Valved Valved
1/4 PC204 0.10 PC204AV 0.10 1/4 1.87 0.63 2.67 0.71 0.63
1/4 PC204-BP* 0.10 PC204AV-BP 0.10 1/4 1.89 0.63 2.52 0.71 0.63
1/4 PC205 0.09 PC205AV 0.10 5/16 1.87 0.63 2.67 0.71 0.63
1/4 PC206 0.09 PC206AV 0.10 3/8 1.87 0.63 2.67 0.71 0.63
1/4 PC206-BP* 0.11 PC206AV-BP 0.13 3/8 2.04 0.63 2.70 0.71 0.63
3/8 PC306 0.24 PC306V 0.27 3/8 2.67 0.96 3.17 1.01 0.88
3/8 PC306-BP* 0.26 PC306V-BP 0.29 3/8 3.15 0.96 3.31 1.01 0.88
3/8 PC308 0.25 PC308V 0.28 1/2 3.15 0.96 3.17 1.01 0.88
3/8 PC308-BP* 0.25 PC308V-BP 0.03 1/2 3.27 0.96 3.43 1.01 0.88
1/2 PC504 0.46 NA – 1/2 3.55 1.30 – – –
1/2 PC504-BP* 0.50 NA – 1/2 3.68 1.21 – – –
1/2 PC506 0.48 NA – 3/4 3.80 1.21 – – –
1/2 PC506-BP* 0.52 NA – 3/4 3.80 1.21 – – –
NA = Not Available
Couplers - 45 Degree
Part Number
Part Number
Body Weight Brass - Weight Hose Overall Largest Wrench Overall Largest Wrench
Brass
Size (lb.) Valved (lb.) I.D. Length Diameter Flats Length Diameter Flats
Non-Valved
(silver sleeve)
Non-Valved Valved
1/4 PC224 0.13 PC224AV 0.13 1/4 2.67 0.71 0.56 2.87 0.71 0.63
1/4 PC224-BP* 0.13 PC224AV-BP 0.14 1/4 2.57 0.71 0.56 2.77 0.71 0.63
1/4 PC226 0.13 PC226AV 0.14 3/8 2.71 0.71 0.56 2.91 0.71 0.63
1/4 PC226-BP* 0.26 PC226AV-BP 0.17 3/8 2.74 0.71 0.56 2.94 0.71 0.63
3/8 PC326 0.36 PC326V 0.36 3/8 3.65 0.96 0.88 3.65 1.01 0.88
3/8 PC326-BP* 0.34 PC326V-BP 0.36 3/8 3.75 0.96 0.88 3.75 1.01 0.88
3/8 PC328 0.36 PC328V 0.36 1/2 3.69 0.96 0.88 3.69 1.01 0.88
3/8 PC328-BP* 0.34 PC328V-BP 0.40 1/2 3.88 0.96 0.88 3.88 0.96 0.88
1/2 PC524 0.74 NA – 1/2 4.18 1.21 1.12 – – –
1/2 PC524-BP* 0.78 NA – 1/2 4.28 1.21 1.12 – – –
1/2 PC526 0.76 NA – 3/4 4.56 1.21 1.12 – – –
1/2 PC526-BP* 0.80 NA – 3/4 4.56 1.21 1.12 – – –
* Suffix BP in part number denotes Push-Lok hose barb. Without suffix denotes standard hose barb.
Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps.
Valved Couplers can be used with either non-valved or valved nipples.

Minneapolis, MN
Moldmate Series
Couplers - 90 Degree
Part No. Brass
Body Part No. Brass Weight Weight Hose Overall Wrench Largest Overall Wrench Largest
Valved (silver
Size Non-Valved (lb.) (lb.) I.D. Length Flats Diameter Length Flats Diameter
sleeve)
B Hydraulics
Non-Valved Valved
1/4 PC214 0.13 PC214AV 0.14 1/4 1.78 0.56 0.71 1.98 0.63 0.71
1/4 PC214-BP* 0.14 PC214AV-BP 0.14 1/4 1.78 0.56 0.71 1.98 0.63 0.71
1/4 PC215 0.13 PC215AV 0.14 5/16 1.78 0.56 0.71 1.98 0.63 0.71
1/4 PC216 0.14 PC216AV 0.15 3/8 1.78 0.56 0.71 1.98 0.63 0.71
1/4 PC216-BP* 0.16 PC216AV-BP 0.17 3/8 1.80 0.56 0.71 2.00 0.63 0.71
3/8 PC316 0.31 PC316V 0.31 3/8 2.78 0.88 0.96 2.78 0.88 0.96
3/8 PC316-BP* 0.37 PC316V-BP 0.37 3/8 2.78 0.88 0.96 2.78 0.88 0.96
3/8 PC318 0.33 PC318V 0.35 1/2 2.78 0.88 0.96 2.78 0.88 0.96
3/8 PC318-BP* 0.37 PC318V-BP 0.39 1/2 2.80 0.88 0.96 2.80 0.88 0.96
1/2 PC514 0.79 NA – 1/2 3.50 1.12 1.21 – – –
1/2 PC514-BP* 0.83 NA – 1/2 3.50 1.12 1.21 – – –
1/2 PC516 0.80 NA – 3/4 3.50 1.12 1.21 – – –
1/2 PC516-BP* 0.84 NA – 3/4 3.50 1.12 1.21 – – –
* Suffix BP in part number denotes Push-Lok hose barb. Without suffix denotes standard hose barb.
Push-Lok hose barbs are designed for use with Parker Push-Lok hose and do not require clamps.
Valved Couplers can be used with either non-valved or valved nipples.
Sub Assemblies and Individual Replacement Parts
Non-valved Sub-assembly (Brass Sleeve)
Body Part No. Brass

Weight (lb.) Thread Size Length Largest Diameter Wrench Flats
Size Non-Valved
1/4 P208-01A 0.07 1/8-27 NPTF 1.15 0.71 0.56
3/8 P308-01A 0.21 1/4-18 NPTF 1.84 0.96 0.88
3/8 P308-01A-HF 0.20 3/8-18 NPTF 1.84 0.96 0.88
1/2 PC500 0.34 1/2-14 NPTF 2.02 1.21 1.12
Valved Sub-assembly (Silver Colored Sleeve)

Bodies are designed for use with a valve and spring retained by a male pipe fitting (i.e. hose barb). An end fitting is
required to retain the internal valving. Valve, valve spring, and end fitting are not included with sub-assembly and
must be ordered separately.
Body Part No. Brass

Weight (lb.) Thread Size Length Largest Diameter Wrench Flats
Size Valved
1/4 P201-01A 0.07 1/8-27 NPTF 1.35 0.71 0.56
3/8 P301-01A 0.21 1/4-18 NPTF 1.84 0.96 0.88

Minneapolis, MN
Moldmate Series
Sub Assemblies and Individual Replacement Parts
Valves (for Valved Sub-assembly) Valve Springs (for Valved Sub-assembly)
Body Body
Part Number Material Part Number Material
B Hydraulics
Size Size
1/4 3613001 Brass 1/4 7820123 Stainless
3/8 P300-11S Brass 3/8 P300-6 Stainless
Replacement Seals (for both Valved and Non-valved)
Body Body
Part Number Material Part Number Material
Size Size
1/4 P200-9A * Silicone 1/4 P200-9AY * Fluorocarbon
* Note: Bulk seals are not returnable.
Assembly Instruction Sheet (for all sizes &

configurations)
Part Number
9090065

Minneapolis, MN
Moldmate Series
Weight Weight
Body Part No. Part No. Thread Overall Exposed Wrench Largest
(lb.) (lb.)
Size Brass Steel Size Length Length** Flats Diameter
Brass Steel
1/4 BPN251F 0.02 PN251F 0.02 1/8-27 NPTF 0.97 0.58 0.50 0.58
B Hydraulics
1/4 BPN252F 0.05 PN252F 0.04 1/4-18 NPTF 1.28 0.89 0.63 0.72
1/4 BPN253F 0.08 PN253F 0.08 3/8-18 NPTF 1.41 1.02 0.75 0.87
3/8 BPN352F 0.05 PN352F 0.05 1/4-18 NPTF 1.48 0.88 0.63 0.72
3/8 BPN353F 0.07 PN353F 0.06 3/8-18 NPTF 1.58 0.98 0.75 0.87
Weight Weight Install

Body Part No. Part No. Thread Overall Exposed Wrench Largest
(lb.) (lb.) Recess Depth
Size Brass Steel Size Length Length** Flats Diameter
Brass Steel Diameter
1/4 PN250 0.02 – – 1/16-27 NPTF 0.94 0.54 0.44 0.51 0.69 0.69
1/4 PN251 0.02 PN251S 0.02 1/8-27 NPTF 0.94 0.54 0.44 0.51 0.69 0.69
1/4 PN252 0.03 PN252S 0.03 1/4-18 NPTF 1.13 0.74 0.56 0.67 0.84 0.94
1/4 PN253 0.05 PN253S 0.05 3/8-18 NPTF 1.19 0.79 0.69 0.79 1.00 0.94
3/8 PN352 0.04 PN352S 0.04 1/4-18 NPTF 1.34 0.74 0.56 0.65 1.00 1.09
3/8 PN353 0.06 PN353S 0.06 3/8-18 NPTF 1.38 0.78 0.69 0.79 1.00 1.13
3/8 PN354 0.12 NA – 1/2-14 NPTF 1.59 0.99 0.88 1.01 1.19 1.25
1/2 PN553 0.12 NA – 3/8-18 NPTF 1.53 0.77 0.88 1.01 1.25 1.34
1/2 PN554 0.11 NA – 1/2-14 NPTF 1.70 0.94 0.88 1.01 1.25 1.50
1/2 PN556 0.16 NA – 3/4-14 NPTF 1.75 0.99 1.06 1.23 1.50 1.56
Valved Nipple
Body Part Number Overall **Exposed Largest

Thread Size Wrench Flats Weight (lb.)
Size Brass Length Length Diameter
1/4 BPV252* 1/4-18 NPTF 1.21 0.82 0.67 .56 0.03
3/8 BPV353* 3/8-18 NPTF 1.48 0.88 0.79 .69 0.07
*Valved Nipple must be used with Valved Coupler.

**This dimension represents the portion of the nipple that is exposed when inserted into a moldmate coupler.
Install Recess Diameter Depth

B
0.84 0.94
1.00 1.23

Minneapolis, MN
Moldmate Series
Nipples - Moldmate Extension
Body Part Number Weight (lb.) Thread Overall Exposed Wrench Largest
Size Brass Brass Size Length Length Flats Diameter
1/4 PN250-25 0.04 1/16-27 NPTF 2.50 .69 3/8 0.43
B Hydraulics
1/4 PN250-40 0.06 1/16-27 NPTF 4.00 .81 3/8 0.43
1/4 PN250-55 0.09 1/16-27 NPTF 5.50 .81 3/8 0.43
1/4 PN251-25 0.06 1/8-27 NPTF 2.50 .69 7/16 0.51
1/4 PN251-40 0.10 1/8-27 NPTF 4.00 1.00 7/16 0.51
1/4 PN251-55 0.13 1/8-27 NPTF 5.50 1.00 7/16 0.51
1/4 PN251-70 0.17 1/8-27 NPTF 7.00 1.00 7/16 0.51
1/4 PN251-85 0.21 1/8-27 NPTF 8.50 1.00 7/16 0.51
1/4 PN252-25 0.09 1/4-18 NPTF 2.50 .88 9/16 0.65
1/4 PN252-40 0.15 1/4-18 NPTF 4.00 1.25 9/16 0.65
1/4 PN252-55 0.22 1/4-18 NPTF 5.50 1.25 9/16 0.65
1/4 PN252-70 0.27 1/4-18 NPTF 7.00 1.25 9/16 0.65
1/4 PN252-85 0.33 1/4-18 NPTF 8.50 1.25 9/16 0.65
3/8 PN351-25 0.07 1/8-27 NPTF 2.50 .88 9/16 0.65
3/8 PN351-40 0.11 1/8-27 NPTF 4.00 1.00 9/16 0.65
3/8 PN351-55 0.15 1/8-27 NPTF 5.50 1.00 9/16 0.65
3/8 PN351-70 0.18 1/8-27 NPTF 7.00 1.00 9/16 0.65
3/8 PN351-85 0.22 1/8-27 NPTF 8.50 1.00 9/16 0.65
3/8 PN352-25 0.09 1/4-18 NPTF 2.50 .88 9/16 0.65
3/8 PN352-40 0.15 1/4-18 NPTF 4.00 1.25 9/16 0.65
3/8 PN352-55 0.21 1/4-18 NPTF 5.50 1.25 9/16 0.65
3/8 PN352-70 0.27 1/4-18 NPTF 7.00 1.25 9/16 0.65
3/8 PN352-85 0.33 1/4-18 NPTF 8.50 1.25 9/16 0.65
3/8 PN353-25 0.12 3/8-18 NPTF 2.50 1.00 11/16 0.79
3/8 PN353-40 0.20 3/8-18 NPTF 4.00 1.25 11/16 0.79
3/8 PN353-55 0.28 3/8-18 NPTF 5.50 1.25 11/16 0.79
3/8 PN353-70 0.37 3/8-18 NPTF 7.00 1.25 11/16 0.79
3/8 PN353-85 0.45 3/8-18 NPTF 8.50 1.25 11/16 0.79

Minneapolis, MN
DM Series
Hydraulic Quick Couplings Miniature
Miniature Double shut-off, push to connect
DM Series are special purpose miniature couplings that offer

double shut-off and push to connect operation in a small
envelope. The 1/8 inch brass couplings are nickel plated with
standard fluorocarbon seals.
Features:
• Rated pressure is 250 psi
• Double shut-off valving
• Fluorocarbon seals
• Standard end configurations are female and male pipe thread
B Hydraulics
Applications:
• Dental equipment
• Lubrication lines
• Fluid transfer
• Coolant lines
Performance DM Series (1/8")

Test Fluid: Water
12
Specifications
10 Body Size (in.) 1/8
8
Locking Device (balls) 5
6 Rated Flow (gpm) 0.8
1/8"
Temperature Range -15°F to +400°F
4
0 How To Order
0 0.2 0.4 0.6 0.8 1 1.2
Flow in USGPM DM - 12 1 - 4 FP
FP= Female NPT

MP= Male MPT
Port Size (1/16 of a inch)
1= Valved Coupler
2= Valved Nipple
1/8" Body Size
DM Series

Minneapolis, MN
DM Series
Hydraulic Quick Couplings Miniature
Miniature Double shut-off, push to connect
Body Overall Largest Wrench

Part Number Weight (lb.) Thread Size
Size Length Diameter Flats
1/8 DM-121-2FP 0.06 1/8-27 NPTF 1.42 0.63 0.55
1/8 DM-121-4FP 0.10 1/4-18 NPTF 1.81 0.78 0.67
B Hydraulics
Body Overall Largest Wrench

Size Length Diameter Flats
1/8 DM-121-2MP 0.06 1/8-27 NPTF 1.50 0.63 0.55
1/8 DM-121-4MP 0.07 1/4-18 NPTF 1.61 0.63 0.55
Body Overall Exposed Largest Wrench

Size Length Length* Diameter Flats
1/8 DM-122-2FP 0.05 1/8-27 NPTF 1.56 1.03 0.63 0.55
1/8 DM-122-4FP 0.09 1/4-18 NPTF 1.97 1.44 0.78 0.67
* This dimension represents the portion that is exposed when a nipple is inserted into a Parker DM Series coupler.
Body Overall Exposed Largest Wrench

Size Length Length* Diameter Flats
1/8 DM-122-2MP 0.05 1/8-27 NPTF 1.65 1.12 0.63 0.55
1/8 DM-122-4MP 0.06 1/4-18 NPTF 1.77 1.24 0.63 0.55
* This dimension represents the portion that is exposed when a nipple is inserted into a Parker DM Series coupler.

Minneapolis, MN
Hydraulic Quick Couplings Ordering Information
When ordering Parker coupler bodies and nipples, please

Optional Features
state the part number of each type of coupler body and each
type of nipple desired. List coupler bodies and nipples as • Prefix “HD” for Heavy Duty Nipple
separate items rather than in combinations. Be sure to double
• Suffix “SL” for Coupler Sleeve-Lok
check thread or hose sizes of items required.
• Suffix “P” for Poppet Valve
Many of Parker’s coupling products are available with unique • Suffix “BP” for Push-Lok Hose Barb
non-standard options well suited to very specific applications. • Suffix “VA” for Valve Actuator
Examples of unusual end use applications might include:
high temperatures (above 250° F), extremely caustic/
corrosive solutions passing through the coupling, external/ Optional Seals Suffix*
B Hydraulics
environmental corrosion situations, or other high wear and

tear situations such as dragging the product along the ground. No suffix is required when ordering products with the standard Nitrile
seals. When specifying an optional seal, refer to the following chart
Please see the Fluid Compatibility Chart at the end of the
to determine the appropriate suffix.
catalog for a guide in selecting material for various media. It
is always recommended that the Quick Coupling Division be Coupling Ethylene Fluoro- Perfluoro-
Neoprene
contacted with any questions concerning specific product Series Propylene carbon elastomer
application needs. 60 Series W Y Z ***
6600 Series W Y Z ***
Typically, a prefix or suffix is added to the base part number SM Series E5 E4 E12 ***
to specify a non-standard O-ring seal, or special option such
HP Series E5 E4 E12 ***
as a sleeve lock. The Optional Seals Suffix chart illustrates
4000 Series W Y Z N/A
the designations.
NS Series E5 E4 N/A ***
FF Series E5 E4 N/A ***
Std. is E49
FH Series E5 E4 N/A ***

FS Series E5 STD E12 ***
3000 Series Available with Polyurethane only (no suffix needed)
TC Series Available with Fluorocarbon only (no suffix needed)
1141 Series Available with Polyurethane only (no suffix needed)
ST Series W Y Z
Water Service Available with Nitrile only
HO Series E5 E4 E12 N/A
Moldmate
Series N/A Y** N/A N/A
Std. is Silicone
N/A = Not Available
STD = Standard (No Suffix Needed)
* To select proper seal materials, see Fluid Compatibility Chart in

Appendices section, or contact your Parker Quick Coupling
Distributor.
** Fluorocarbon seal available for use only with oil based media, not
water glycol.
*** Contact QCD for Perfluoroelastomer seal options.

Minneapolis, MN
Hydraulic Quick Couplings
Diagnostic Test Port Couplings Test Port Couplings and SensoControl
B Hydraulics
Catalog 4054-3/UK – SensoControl Catalog 4083-4/UK – SensoControl
Diagnostic Products Industrial Products
For information on Parker’s Diagnostic and Industrial solutions, review these

SensoControl catalogs or visit Parker.com/SensoControl.
Test Port Coupling Selection Guide
Body Material* Locking Rated

Test Port Valving Style Standard Seal Material Temp Range**
Size Mechanism Pressure
Br SS S
PD Series Flush Face 1/8” n n n Ball Nitrile 6000 psi -40° to +250° F
PDP Series Ball (Nipple only) 1/8” n Ball Nitrile 6000 psi -40° to +250° F
EMA3 Se-
Poppet 1/8” n n Threads Nitrile/Fluorocarbon 9000 psi -15° to +250° F
ries
* See Fluid Compatibility chart and/or consult QCD for questions regarding proper material for specific applications.
CODE: Br = Brass; SS = Stainless Steel; S = Steel
** Temperature Range for standard seal material

Minneapolis, MN
Hydraulic Products Test Port Couplings
Couplings PD Series
PD Series couplings provide easy connection for mechanical

gauges or specialized diagnostic equipment like SensoCon
trol®.
Typically, PD or BPD nipples are permanently mounted in
the system at threaded test ports, in rigid tubing or in hose
assemblies. PD couplers are attached to test instruments.
Couplers align to the mating nipples without threading. This
allows gauges, transducers and other test equipment to be
snapped into place without difficulty.
Note: Protective dust caps play a crucial role in the life of
B Hydraulics
a quick coupling and no purchase is complete without the

selection of an appropriate dust cap.
Features
• Flush-face poppet valves minimize air inclusion and spillage,
provide easy-to-clean surfaces, and help to prevent cont
amination.
Ordering Information • Grip-tight knurled sleeves help to make connecting and dis
connecting easy, even while wearing gloves.
Coupler / Nipple Material
• Nipples are machined from high tensile steel for strength
- Prefix “B” for Brass Body with Fluorocarbon seal to withstand 6000 PSI continuous operating pressure. BPD
- Prefix “SS” for Stainless Steel Body with Fluorocarbon seal nipples offer features similar to the standard steel PD nipples
with the added feature of a brass body.
- Standard body material is Steel with Nitrile seal
• PD nipples are designed to meet or exceed SAE J1502 and
- Suffix “-6” to include Dust Cap with Nipple
ISO 15171-1 design and performance specifications.
• End connections include pipe, O-ring, metric thread,
bulkhead, 37° Flare, ORFS and bite-type.
Optional Seals Suffix*
No suffix is required when ordering products with the standard
Nitrile seals. When specifying an optional seal, refer to the
following chart to determine the appropriate suffix.
PD Series Dust Cap
Coupling Ethylene
Fluorocarbon Neoprene
Series Propylene Body Dust Cap
Size Part No.
PD Series W Y Z
PD6-
*To select proper seal materials, see Fluid Compatibility Chart in Appendix 1/8
section, or contact your Parker Quick Coupling Distributor.
285
Specifications - Body Size 1/8”

Description PD Coupler PD Nipple BPD Nipple Assembly
Part Number PD242 PD361 BDP343Y —
Body Material (Steel) Carbon Steel High Tensile Steel Brass —
Rated Pressure (PSI) 6000 6000 300 6000
Temperature Range (STD Seals) -15°F to +400°F
-40°F to +250°F -40°F to +250°F
Nitrile Fluorocarbon
Rated Flow (GPM) — — — 0.8
Max. Recommended Flow (GPM) — — — 4.0
Burst Pressure (PSI/Min) 23,000 40,000 — 17,000
Vacuum Data (Inches Hg) 27.5 27.5 27.5 27.5
Pressure Drop at Rated Flow (PSI)
— — — 56
with 200 SUS Fluid
Spillage at 15 PSI (ml)-Assembly 0.1 per disconnect
Air Inclusion (ml)-Assembly 0.02 per connect
Connect Force-Assembly 41 Lbs. (100 PSI)
Disconnect Force-Assembly 20 Lbs. (100 PSI)

Minneapolis, MN
Couplings PD Series
Couplers- Female Thread
Body Largest Diam-

Part Number Thread Size Overall Length Wrench Flats Weight
Size eter
1/8 PD222 1/8-27 NPTF 1.67 0.81 0.96 0.20
1/8 PD240 7/16-20 UNF 2.12 0.81 0.96 0.26
1/8 PD242 1/4-18 NPTF 2.12 0.81 0.96 0.25
1/8 SSPD242Y** 1/4-18 NPTF 2.12 0.81 0.96 0.25
B Hydraulics
1/8 PD260 9/16-18 UNF 2.12 0.81 0.96 0.24
1/8 PD248 1/4-19BSPP 2.12 1.19 0.38
1/8 PD288 1/2-14BSPP 2.52 1.19 0.35
Couplers- Male Pipe Thread
Body Largest Diam-

Part Number Thread Size Overall Length Wrench Flats Weight
Size eter
1/8 PD243 1/4-18 NPTF 2.26 0.81 0.96 0.23
Nipples- Female Pipe Thread
Body Exposed Wrench Largest

Part Number Thread Size Overall Length Weight
Size Length Flats Diameter
1/8 PD322 1/8-27 NPTF 1.48 0.78 0.56 0.65 0.06
1/8 PD342 1/4-18 NPTF 1.63 0.93 0.75 0.87 0.12
Nipples- Male Pipe Thread

1/8 PD323 1/8-27 NPTF 1.55 0.85 0.69 0.79 0.17
1/8 BPD323Y* 1/8-27 NPTF 1.44 0.74 0.63 0.72 0.17
1/8 BPD343Y* 1/4-18 NPTF 1.48 0.78 0.69 0.79 0.06
1/8 PD343 1/4-18 NPTF 1.48 0.78 0.69 0.79 0.06
1/8 SSPD343Y** 1/4-18 NPTF 1.48 0.78 0.69 0.79 0.06
1/8 PD363 3/8-18 NPTF 1.50 1.13 0.81 0.96 0.09
* BPD designates brass body, Fluorocarbon seal standard
** SSPD designates 316SS body, Fluorocarbon seal standard
Note: Add -6 to Nipple part number to include dust cap, for example PD343-6

Minneapolis, MN
Couplings PD Series
Nipples- Male Metric Thread

Part Number Thread Size Metric Overall Length Weight
1/8 PD357 M10 x 1.0 1.80 1.10 0.69 0.79 0.17
1/8 PD397 M12 x 1.5 1.85 1.05 0.69 0.79 -
B Hydraulics
1/8 PD367C M14 x 1.5 1.50 0.80 0.75 0.87 0.07

1/8 PD3107 M16 x 1.5 1.54 0.84 0.88 1.01 0.08
1/8 PD3127 M18 x 1.5 1.60 0.90 0.94 1.08 0.09
1/8 PD3147 M20 x 1.5 1.50 0.80 0.75 0.87 0.07
1/8 BPD3167 M22 x 1.5 1.65 0.95 1.12 1.30 -
Nipples- Male Straight Thread

Part Number Thread Size ORB Overall Length Weight
1/8 PD331 3/8-24 UNF 1.80 1.10 0.69 0.79 0.17
1/8 PD341 7/16-20 UNF 1.60 0.90 0.69 0.79 0.08
1/8 PD351 1/2-20 UNF 1.32 0.62 0.63 0.72 0.05
1/8 PD361 9/16-18 UNF 1.32 0.62 0.69 0.79 0.06
Nipples- Bulkhead Triple-Lok
Body Overall Exposed Wrench Largest

Part Number Thread Size Tube Size Weight
Size Length Length Flats Diameter
1/8 PD345 7/16-20 UNF 1/4 2.92 2.22 0.81 0.94 0.19
1/8 PD355 1/2-20 UNF 5/16 2.92 2.22 0.81 0.94 0.19
1/8 PD365 9/16-18 UNF 3/8 3.00 2.30 0.81 0.94 0.20
Nipples- Bulkhead Seal-Lok
Body Overall Exposed Wrench Largest

Part Number Thread Size Tube Size Weight
Size Length Length Flats Diameter
1/8 PD346 9/16-18 UNF 1/4 2.98 2.27 0.81 0.94 –
1/8 PD366 11/16-16 UNF 3/8 3.08 2.37 1.00 1.16 –
1/8 PD386 13/16-16 UNF 1/2 3.18 2.47 1.12 1.30 –
* Note: A
dd -6 to part number to include dust cap, for example PD343-6
* BPD designates brass body, Fluorocarbon seal standard
** SSPD designates 316SS body, Fluorocarbon seal standard

Minneapolis, MN
Couplings PD Series
Tube End Nipples*- Triple Lok
Body Exposed
Part Number Steel Tube Size Overall Length Weight
Size Length
1/8 PD34BTX 1/4 1.64 0.94 0.10
1/8 PD36BTX 3/8 1.66 0.96 0.09
B Hydraulics
1/8 PD38BTX 1/2 1.17 0.47 0.12
1/8 PD312BTX 3/4 1.39 0.69 0.27
* Tube end nipples are designed to meet the performance standards of the tube or hose fitting connection, which may or may not meet SAE J1502 Standards
Tube End Nipples*- Seal Lok
Body Exposed
Part Number Steel Tube Size Overall Length Weight
Size Length
1/8 PD34BTL 1/4 2.18 1.48 0.12
1/8 PD36BTL 3/8 2.30 1.60 0.14
1/8 PD38BTL 1/2 1.57 0.83 0.13

1/8 PD310BTL 5/8 1.16 0.46 0.19
* Tube end nipples are designed to meet the performance standards of the tube or hose fitting connection, which may or may not meet SAE J1502 Standards
Note: A
dd -6 to Nipple part number to include dust cap, for example PD343-6

Minneapolis, MN
Couplings PDP Series
PDP Series couplings provide easy connection for mechanical gauges

or specialized diagnostic equipment like SensoControl.
Typically, PDP nipples are permanently mounted in the system
at threaded test ports, in rigid tubing or in hose assemblies. PDP
couplers are attached to test instruments.
Locking balls align the couplers to the mating nipples without
threading, so gauges, transducers and other test equipment can be
snapped into place without difficulty.
Parker’s PDP Series couplings offer the advantages of PD couplings,
but are designed to connect easily and quickly under full system
B Hydraulics
pressure up to 6000 PSI (operating).

PDP couplers and nipples push to connect with a constant force of
only six pounds. Then the coupler base is turned to open the valve and
complete the connection. In the connected position, the coupler base
blocks the retracting sleeve to prevent accidental disconnects.
Features
• Made to connect under pressure up to 6000 psi
•
Grip-tight knurled sleeves help to make connecting and
disconnecting easy, even while wearing gloves.
Specifications - Body Size 1/8” •
Nipples are machined from high tensile steel for strength to
PDP Cou- withstand 6000 PSI continuous operating pressure.
Description PDP Nipple Assembly
pler
• End connections include pipe, O-ring, 37º Flare and ORFS
Body Material Carbon High Tensile
— • Durable Ball Valve Nipple.
(Steel) Steel Steel
• C
oupler is unvalved to allow gauges and transducers to return to
Rated Pressure
– 6000 6000 zero when disconnected.
(PSI)
Temperature
Range (STD -40°F to +250°F
Seals) Nitrile
Connect Force-
6 Lbs. (0-6000 PSI)
Assembly
Disconnect
Force- 7 Lbs. (0-6000 PSI)
Assembly Ordering Information
Coupling / Nipple Material:
PD Series Dust Cap Standard body material is Steel
Standard seal material is Nitrile
Dust
Body
Cap Part
Size
No.
1/8 PD6-285 Optional Seals Suffix*
No suffix is required when ordering products with the standard
Nitrile seals. When specifying an optional seal, refer to the
following chart to determine the appropriate suffix.
Coupling Ethylene
Fluorocarbon Neoprene
Series Propylene
PDP Series W Y Z
*To select proper seal materials, see Fluid Compatibility Chart in Appendix
Note: A
dd -6 to Nipple part number to include dust cap, for example PDP343-6 section, or contact your Parker Quick Coupling Distributor.

Minneapolis, MN
Couplings PDP Series
Coupler - Female Thread
Body
Part Number Steel Thread Size Overall Length Largest Diameter Wrench Flats Weight
Size
1/8 PDP242 1/4-18 NPTF 2.15 0.96 0.81 –
1/8 PDP288 1/2-14BSPP 2.58 1.19 0.35
B Hydraulics

1/8 PDP323 1/8-27 NPTF 2.02 1.46 0.69 0.79 0.26
1/8 PDP343 1/4-18 NPTF 1.48 0.93 0.69 0.79 0.12
Nipples - Male Straight Thread

Part Number Thread Size ORB Overall Length Weight
1/8 PDP341 7/16-20 UNF 2.06 1.50 0.69 0.79 0.12
1/8 PDP361 9/16-18 UNF 1.48 0.93 0.69 0.79 0.07
Nipples - Triple-Lok

Part Number Tube Size Overall Length Weight
1/8 PDP34BTX 1/4 2.11 1.55 0.69 .80 –
1/8 PDP36BTX 3/8 2.13 1.57 0.69 .80 –
Nipples - Seal-Lok

Part Number Tube Size Overall Length Weight
1/8 PDP34BTL 1/4 2.65 2.09 .69 .80 –
1/8 PDP36BTL 3/8 2.77 2.21 .81 .94 –

Minneapolis, MN
Couplings EMA3 Series
EMA couplings provide easy diagnostic connections for Parker

SensoControl® equipment or mechanical gages. EMA test
points are typically permanently plumbed into a fluid system
at locations where pressure measurements are required for
maintenance or testing. Integral pressure cap protects the
test point from damage and prevents contam-ination of the
fluid system. Proven twist-to-connect design allows the test
points to be connected even when the system is in operation
and the test points are pressurized. EMA’s compact design
and optional high pressure hose assemblies allow extra
flexibility for the location of system test points.
B Hydraulics
Although designed primarily for diagnostic applications, EMA

fittings and hose assemblies are idea for a wide range of
applications that require compact high pressure connections
and limited flow rates.
Features
• Knurled sleeve allows simple twist-to-connect operation
without the use of tools
•
Rugged design allows connect-under-pressure operation
up to 5800 psi
•
Maximum rated working pressure of 9000 psi exceeds the
requirements of most applications
• Integral threaded dust cap protects the test point from Specifications
damage and contamination Body Size 1/8
• EMA fittings are machined from solid barstock and Rated Pressure (psi) 9000 PSI
protected with Chromium-6 Free plating.
Max Connect-Under-Pressure (psi) 5800
• S
tainless steel springs for corrosion resistance
Rated Flow (GPM) 0.8
• E
lastomeric interface and valve seals provide leak free
Body Material Chromium-6 Free Plated Steel
operation
Nitrile (external)
• C
ompact design and optional high pressure hose Standard Seal Material
Fluorocarbon (internal)
assemblies provide flexibility for tight space requirements
Temperature Range (std. seals) -15° to +250° F
Male Pipe Thread
Interface Thread
New Part Number Old Part Number Port Thread Size Wrench Flats Overall Length Weight
Size
EMA3/1/8NPTCF EMA3/1/8NPT 1/8-27NPT 17mm M16 X 2.0 1.81 0.15
EMA3/1/4NPTCF EMA3/1/4NPT 1/4-18NPT 17mm M16 X 2.0 1.98 0.16
EMA3/1/4NPT71 EMA3/1/4NPT71
1/4-18NPT 17mm M16 X 2.0 1.95 0.16
Stainless Steel Stainless Steel
SAE Straight Thread
Interface
New Part Number Old Part Number Port Thread Size Wrench Flats Overall Length Weight
Thread Size
EMA3/7/16UNFCF* EMA3/7/16-20UNF-2A 7/16-20UNF-2A 17mm M16 X 2.0 1.88 0.15
EMA3/9/16UNFCF* EMA3/9/16-18UNF-2A 9/16-18UNF-2A 19mm M16 X 2.0 1.88 0.17
* O-Ring seal on port

Minneapolis, MN
Couplings EMA3 Series
Metric Straight Thread
New Part Number Old Part Number Port Thread Size Wrench Flats Interface Thread Size Overall Length Weight
EMA3/8X1ORCF* EMA3/M8X1OR M8X1 17mm M16 X 2.0 1.81 0.15
EMA3/10X1EDCF** EMA3/10X1ED M10X1 17mm M16 X 2.0 1.85 0.15
EMA3/12X1.5EDCF** EMA3/12X1.5ED M12X1.5 17mm M16 X 2.0 1.94 0.16
EMA3/14X1.5EDCF** EMA3/14X1.5ED M14X1.5 19mm M16 X 2.0 1.94 0.16
* O-Ring seal on port **Molded seal on port
B Hydraulics
British Parallel Pipe
EMA3/1/8EDCF** EMA3/1/8ED 1/8 BSPP 19mm M16 X 2.0 1.77 0.15

**Molded seal on port
EMA Gauge Adapter
Part Number Port Thread Size Wrench Flats Interface Thread Size Overall Length Weight
MAV1/4NPTMA3CF 1/4-18NPT 19mm M16 X 2.0 2.22 0.16
MAV1/4NPTMA3KMCF
1/4-18NPT 19mm M16 X 2.0 2.22 0.23
Includes Dust Cap
EMA Gauge Adapter
MAVMD1/4NPTMA3CF 1/4-18NPT 19mm M16 X 2.0 2.22 0.18
SCA-7/16-EMA-3 7/16-20UNF 19mm M16 X 2.0 1.60
Union
EMA3VSCF EMA3VS M16 X 2.0 17mm M16 X 2.0 1.65 0.11
Transducer Adapters BSPP Thread*
SCA-1/4-EMA-3CF 1/4-19BSPP 27mm M16 X 2.0 32mm 0.30
SCA-1/2-EMA-3 1/2-14BSPP 27mm M16 X 2.0 36mm 0.30
* Note: For old style M22X1.5 thread contact QCD

Minneapolis, MN
Couplings Transducer Adapters
Flexible Hose
Part Number Length (in.) Length (mm) Thread Size
SMA3-200CF 7.90 200 M16 x 2.0

SMA3-400CF 15.75 400 M16 x 2.0
SMA3-800CF 31.50 800 M16 x 2.0
SMA3-1000CF 39.38 1000 M16 x 2.0
SMA3-2000CF 78.75 2000 M16 x 2.0
SMA3-4000CF 157.50 4000 M16 x 2.0
B Hydraulics
Note: Other lengths available upon request.

Maximum pressure rating for test hose is 9000 psi.
Hose Assembly
Part Number Length (in.) Length (mm) Coupling
PDH-19 19 483 PD
PDH-32 32 813 PD
PDH-120 120 3048 PD
PDH-240 240 6096 PD
Note: Maximum pressure rating for test hose is 6000 psi.

Minneapolis, MN
Couplings Fluiding Sampling
These diagnostic fluid sampling products are designed to

provide an easy access point for obtaining fluid samples. A
permanently mounted test point eliminates the need to shut
down or break lines when taking samples and reduces the
chances of contamination. Fluid analysis is crucial in both
engines and hydraulic systems as it can reveal problems
with filtration and other internal components. Early detection
can prevent costly repairs, unscheduled maintenance and
production downtime. These fluid sampling nipples should be
installed in either low pressure or return lines. For the most
accurate monitoring, fluid samples should be constantly taken
from the same location.
B Hydraulics
Specifications
Body Size 1/8
Rated Pressure (PSI) 500 PSI
Seal Material Fluorocarbon
Temperature Range (std. seals
-40° to +250° F
(Fluorocarbon)
Couplers- Female Thread
Body Female Thread Female Thread Largest

Part Number Overall Length Wrench Flats Weight
Size NPTF ORB Diameter
1/8 PDFS242 1/4-18 – 2.15 0.81 0.96 0.25
Nipples- Male Thread
Body Thread Size Thread Size Overall Exposed Largest

Part Number Wrench Flats Weight
Size ORB or NPTF Metric Length Length Diameter
1/8 BPDFS341 7/16-20 ORB 1.60 0.90 0.69 0.79 0.08
1/8 BPDFS343 1/4-18 NPTF 1.48 0.78 0.69 0.79 0.06
1/8 PDFS-PROBE* NA – – – – –
Fluorocarbon seal is standard.
Dust Cap PD6-285 is recommended.

Minneapolis, MN
Hydraulic Products Diagnostic Fittings
Couplings Tee Fittings
Parker’s in-line diagnostic tees are designed to work with the

SensoControl diagnostic couplings.
The tee fittings are offered in a standard and custom line of
fixed flow control orifice fittings. These products are available
as standard in two Parker product series — ORFS and 37° flare,
and as a custom option in virtually any orifice size, fitting series,
size, material and configuration.
Features• Designed around the two most common hydraulic
tube/hose interfaces: O-ring face seal (Parker Seal-Lok) and
37° fl are (JIC / Parker Triple-Lok)
• ORFS and 37° fl are swivel feature offers unlimited
B Hydraulics
positioning without displacing port adapter

• Uses elastomeric sealing: SAE –4 (7/16-20 UNF) port as
universal diagnostic port per SAE J1926-1/ISO 11926
• Enlarged and lengthened body hex ensures that diagnostic
port offers full thread engagement and pressure capability
• Adaptable to Parker’s line of diagnostic and fluid sampling
tips including: EMA3, PD and PDFS, as well as various direct
connecting electronic/mechanical pressure gauges
Tee Fittings
Part Number (PD) Type Picture Port #1 Port #2 L (in) Hex (in) Weight (LBs)
4-4 LOHL6G5TP-S-PD ORFS 1/4 1/4 1.83 1.063 0.3535
6-4 LOHL6G5TP-S-PD ORFS 3/8 3/8 1.95 1.063 0.3855
8-4 LOHL6G5TP-S-PD ORFS 1/2 1/2 2.18 1.063 0.4325
10-4 LOHL6G5TP-S-PD ORFS 5/8 5/8 2.40 1.125 0.5430
12-4 LOHL6G5TP-S-PD ORFS 3/4 3/4 2.59 1.25 0.7475
16-4 LOHL6G5TP-S-PD ORFS 1 1 2.85 1.50 1.0570
4-4 XHX6G5TP-S-PD 37° Flare 1/4 1/4 1.99 1.063 0.3275
6-4 XHX6G5TP-S-PD 37° Flare 3/8 3/8 2.08 1.063 0.3390
8-4 XHX6G5TP-S-PD 37° Flare 1/2 1/2 2.30 1.063 0.3780
10-4 XHX6G5TP-S-PD 37° Flare 5/8 5/8 2.49 1.125 0.4380
12-4 XHX6G5TP-S-PD 37° Flare 3/4 3/4 2.66 1.25 0.5765
16-4 XHX6G5TP-S-PD 37° Flare 1 1 2.99 1.50 0.8280
Part Number (EMA) Type Picture Port #1 Port #2 L (in) Hex (in) Weight (LBs)
4-4 LOHL6G5TP-S-EMA ORFS 1/4 1/4 1.83 1.063 0.4120
16-4 LOHL6G5TP-S-EMA ORFS 1 1 2.85 1.50 1.1140
4-4 XHX6G5TP-S-EMA 37° Flare 1/4 1/4 1.99 1.063 0.3865
16-4 XHX6G5TP-S-EMA 37° Flare 1 1 2.99 1.50 0.8900
Note: Assembly values are for dry, unlubricated swivel nut connections

Minneapolis, MN
Hydraulic Quick Couplings Promotional Products
Description
These popular Quick Coupling Key Chains are constructed
of anodized aluminum and are available in an array of
colors. The original design, nickel plated version can be
ordered as well.
Part Number Sleeve Color
B Hydraulics
KEY-BK Black
KEY-BU Blue
KEY-GR Green
KEY-RD Red
KEY-CL Clear
KEY-NI Old style nickel plated

Minneapolis, MN
Thermoplastic Coupling Selection Guide.................................... C-2
Quick Couplings Spectrum Series.................................................. C-3

Couplers......................................................C-4, C-5
Nipples............................................................... C-5
C Thermoplastics
C-1 Parker Hannifin Corporation

Minneapolis, MN
Thermoplastic Coupling Selection Guide
Coupler Body Size Locking Std. Seal Temp. Rate

Series Valving Material
Style (in.) Mechanism Material Range Pressure
General Purpose
Spectrum™ Valved or Acetal 0º to +180º
1/8 & 3/8 Finger Lock Nitrile 0 to 145 PSI
Series Unvalved 316 SS F
Spectrum™ Valved or Push-to- PVDF/SS 0º to +250º
1/8 & 3/8 Finger Lock Fluorocarbon 0 to 115 PSI
Series Unvalved connect 316 SS* F
Spectrum™ Valved or PVDF/ 0º to +250º 15 to 115
3/8 Finger Lock Fluorocarbon
Series Unvalved PEEK™* F PSI
*Spectrum Series PVDF material options are subject to quote from the division
C Thermoplastics

Minneapolis, MN
Spectrum Series
Thermoplastic Couplings Push-to-Connect
Four point locking mechanism
Parker’s Spectrum™ Series couplers are the most advanced

engineered thermoplastic couplings available. Spectrum Series
couplings combine compact size, high flow capability, and light weight
design to meet a broad range of coupling applications. Spectrum
Series can be used in many applications previously reserved for
stainless steel couplings.
Features
• Excellent Chemical Compatibility

• Standard Acetal/SS Material with PVDF/SS and PVDF/PEEK™
options subject to quote
• High Flow Capacity
• Easy Push-To-Connect Operation
• Available Valved and Unvalved
• Flexible Modular Design
• Four Point 360° Locking Mechanism
C Thermoplastics
• Panel Mounting Option
Applications:
• Chemical processing
• Automation equipment
• Semi-conductor industry
• Food processing
Spectrum™ Series Specifications

Acetal/SS (standard material) *PVDF/SS *PVDF/PEEK™
(black with black sleeve) (translucent with white sleeve) (translucent)
Body Size 1/8 3/8 1/8 3/8 3/8
0-145 psi 0-145 psi 0-115 psi 0-115 psi 15-115 psi
Pressure Range
(0-10 bar) (0-10 bar) (0-8 bar) (0-8 bar) (0-8 bar)
0° F to 180° F 0° F to 180° F 0° F to 250° F 0° F to 250° F 0° F to 250° F
Temperature Range
(-20° C to +80° C) (-20° C to +80° C) (-20° C to +120° C) (-20° C to +120° C) (-20° C to +120° C)
1.5 GPM 4.5 GPM 1.5 GPM 4.5 GPM 4.5 GPM
Rated Flow
(5.6 lpm) (17 lpm) (5.6 lpm) (17 lpm) (17 lpm)
Body Material Acetal Acetal PVDF PVDF PVDF
Spring Material 316 SS 316 SS 316 SS 316 SS PEEK™
Seal Material Nitrile Nitrile Fluorocarbon Fluorocarbon Fluorocarbon
*PVDF material options are subject to quote from the division
How To Order
Performance Spectrum Series (1/8") Spectrum Series (3/8") S 2 - A C V - 04 - FP
Test Fluid: Water Test Fluid: Water FP - Female pipe
25 40
MP - Male pipe
Double
Shut Off HB - Standard hose barb
35
Double BHB - Bulkhead hose barb
20 Shut Off
Port Size 16 ths
30
Single
Shut Off V - Valved
25
15 Single S - Straight thru
Shut Off
20 C - Coupler
N - Nipple
10 P - Panel mount coupler
15
Straight
Straight Through A - Acetal
Through 10 P - PVDF
5
K - PVDF/PEEK™
5
Body Size
2 - 1/8 Inch
0 0 6 - 3/8 Inch
0 0.5 1 1.5 2 0 1 2 3 4 5 6
Flow in USGPM Spectrum Series Thermoplastic Couplings
Flow in USGPM
Note: Not all combinations are standard. Please
contact QCD for availability, price and delivery.

Minneapolis, MN
Spectrum Series
Couplers- Valved, Female Pipe
Body Acetal Port Overall

Largest Diameter Wrench Flats
Size Part Number NPT Length
1/8 S2-ACV-04-FP 1/4-18 2.34 .82 .67
3/8 S6-ACV-04-FP 1/4-18 2.63 1.02 .82
3/8 S6-ACV-06-FP 3/8-18 2.63 1.02 .82
Couplers- Valved, Male Pipe

C Thermoplastics

1/8 S2-ACV-04-MP 1/4-18 2.15 .82 .67
3/8 S6-ACV-04-MP 1/4-18 2.90 1.02 .82
3/8 S6-ACV-06-MP 3/8-18 2.77 1.02 .82
Couplers- Valved, Hose Barb
Body Acetal Overall

Hose I.D. Largest Diameter Wrench Flats
Size Part Number Length
1/8 S2-ACV-03-HB 3/16 (4 mm) 2.34 .82 .67
1/8 S2-ACV-04-HB 1/4 (6 mm) 2.34 .82 .67
3/8 S6-ACV-04-HB 1/4 (6 mm) 3.19 1.02 .82
3/8 S6-ACV-06-HB 3/8 (9 mm) 3.19 1.02 .82
Couplers- Valved, Bulkhead Hose Barb
Body Acetal Overall Largest Bulkhead Bulkhead

Hose I.D. Wrench Flats
Size Part Number Length Diameter Wrench Flats Hole Diameter
1/8 S2-ACV-03-BHB 3/16 (4 mm) 2.89 .82 .67 .67 .50
Panel Mount Couplers- Valved, Female Pipe

Port NPT Wrench Flats
1/8 S2-APV-04-FP 1/4-18 2.16 1.10 .67 1.06 1.00

Minneapolis, MN
Spectrum Series
Panel Mount Couplers- Valved, Hose Barb

1/8 S2-APV-04-HB 1/4 (6 mm) 2.34 1.10 .67 1.06 1.00
Nipples- Unvalved, Female Pipe
C Thermoplastics
1/8 S2-ANS-04-FP 1/4-18 1.18 .76 .67
3/8 S6-ANS-06-FP 3/8-18 1.52 .91 .83
Nipples- Unvalved, Male Pipe

1/8 S2-ANS-04-MP 1/4-18 1.24 .76 .67
3/8 S6-ANS-06-MP 3/8-18 1.64 .91 .83
Nipples- Unvalved, Hose Barb
Body Acetal Overall Largest

Hose I.D.
Size Part Number Length Diameter
1/8 S2-ANS-03-HB 3/16 (4 mm) 1.26 .34
1/8 S2-ANS-04-HB 1/4 (6 mm) 1.26 .34
3/8 S6-ANS-04-HB 1/4 (6 mm) 1.86 .71
3/8 S6-ANS-06-HB 3/8 (9 mm) 1.87 .71
Nipples- Unvalved, Bulkhead Hose Barb
Body Acetal Overall Largest Diam- Bulkhead Bulkhead

Size Part Number Length eter Wrench Flats Hole Diameter
1/8 S2-ANS-03-BHB 3/16 (4 mm) 1.97 .55 .64 .55 .44
1/8 S2-ANS-04-BHB 1/4 (6 mm) 1.97 .55 .77 .67 .44

Minneapolis, MN
Spectrum Series
Nipples- Valved, Female Pipe

1/8 S2-ANV-04-FP 1/4-18 1.80 .76 .67
3/8 S6-ANV-04-FP 1/4-18 2.02 .91 .83
3/8 S6-ANV-06-FP 3/8-18 2.02 .91 .83
Nipples- Valved, Male Pipe

C Thermoplastics

1/8 S2-ANV-04-MP 1/4-18 1.80 .76 .67
3/8 S6-ANV-04-MP 1/4-18 2.24 .91 .83
3/8 S6-ANV-06-MP 3/8-18 2.16 .91 .83
Nipples- Valved, Hose Barb
Body Acetal Overall

Hose I.D. Largest Diameter Wrench Flats
Size Part Number Length
1/8 S2-ANV-03-HB 3/16 (4 mm) 1.80 .76 .67
1/8 S2-ANV-04-HB 1/4 (6 mm) 1.80 .76 .67
3/8 S6-ANV-04-HB 1/4 (6 mm) 2.59 .91 .82
3/8 S6-ANV-06-HB 3/8 (9 mm) 2.59 .91 .82
Nipples- Valved, Bulkhead Hose Barb
Body Acetal Overall Largest Diam- Bulkhead Bulkhead

Size Part Number Length eter Wrench Flats Hole Diameter
1/8 S2-ANV-03-BHB 3/16 (4 mm) 2.35 .76 .67 .55 .44

Minneapolis, MN
Swivels Table of Contents
PS Series
Introduction ........................................................... D-2
Seal Options........................................................... D-2
How To Order ........................................................ D-4
Repair Kits ............................................................. D-4
In-Line................................................................... D-5
90°..................................................... ....................D-8
S Series
Introduction ..........................................................D-13
Repair Kits ............................................................D-13
D Swivels
How To Order .......................................................D-14
90°........................................................................D-15
D-1 Parker Hannifin Corporation

Minneapolis, MN
Swivels PS Series
Introduction
The PS Series Swivel is designed to meet today’s application

needs and performance requirements. Pressure capabilities
up to 5000 psi, 3/8” through 1” body sizes, a variety of port
options, and Chromium-6 Free plating make the PS Series
Swivels ideal for an array of dynamic applications.
Features
• Hardened bearing races for extended service life.
• Full flow design minimizes pressure drop for optimum
system performance.
• Sealed bearing design isolates bearing race from media
and environment.
• Reduced bearing load design minimizes wear in the bearing
race and extends service life.
• PTFE back-up rings support primary seal for high-pressure
applications.
• Chromium-6 Free plating for maximum corrosion
resistance.
• PS Series Swivels eliminate hose twist and torque that may
cause premature hose failure.
PS Series Specifications
Body Size (in.) 3/8 1/2 3/4 1
Maximum Rated Pressure (psi) 5000 5000 5000 5000
D Swivels
Except the following port options in the noted size

03 (Male JIC 37°)
05 (Male SAE O-Ring Boss)
06 (Female JIC 37°) In-Line Housing Port
07 (Female NPSM) 4600 3000 2600
Temperature Range -40° to 250°
Seal Options
Nitrile

D-2 Quick Coupling Division
Minneapolis, MN
Swivels PS Series
Introduction
Performance Data
Torque vs. Pressure
Recommended Max. Speed vs. Pressure
45
50
45 40
40 35
1" 3/4"
35
Torque (in-lbs)
30
30
25
RPM
25
3/8" 20
1/2"
20
3/4" 15
15 1/2"
1" 3/8"
10 10
5 5
0 0
0 1000 2000 3000 4000 5000 0 1000 2000 3000 4000 5000
Pressure (PSI) Pressure (PSI)
90 PS Swivel
150 SUS Oil Flow vs. Pressure Drop
40
3/8"
35
Pressure Drop (psid)
30
25
D Swivels
1/2" 1"
20
3/4"
15
10
0
0 10 20 30 40 50 60 70 80 90
Flow (USGPM)

Minneapolis, MN
Swivels PS Series
How to Order
In-Line Swivels 90° Swivels
Shaft Housing Shaft Housing
PS Part Number: PS Part Number:
PS 16 1 01 02- 16 - 16 PS 16 9 05 03- 16 - 16
Housing Port Size

Housing Port Size (1/16 of an inch)
(1/16 of an inch) Shaft Port Size
(1/16 of an inch)
Shaft Port Size
(1/16 of an inch) Housing Port Configuration:
02 = Female NPTF
03 = Male JIC 37 Degree
D Swivels
Housing Port Configuration:

07 = Female NPSM Pipe Swivel
02 = Female NPTF
10 = Female SAE Straight Thread
06 = Female JIC 37 Degree
JM = Male Seal-Lok
JM = Male Seal-Lok
Shaft Port Configuration: Shaft Port Configuration:

01 = Male NPTF 01 = Male NPTF
03 = Male JIC 37 Degree 03 = Male JIC 37 Degree
05 = Male SAE O-Ring Straight Thread 05 = Male SAE O-Ring Straight Thread
Configuration: Configuration:
JM = Male Seal-Lok JM = Male Seal-Lok
1 = In-line 9 = 90 degree
Body Size Body Size

(1/16 of an inch) (1/16 of an inch)
-6 (3/8”) - 6 (3/8”)
-8 (1/2”) - 8 (1/2”)
-12 (3/4”) - 12 (3/4”)
-16 (1”) - 16 (1”)
Parker Swivel designator Parker Swivel designator
PS Series Repair Kits (In-line and 90º)

Repair Kits come complete with O-Rings, PTFE Back-Up Ring, Cap Screws, Locking Balls, Retaining Ring and grease fitting.
Repair kits are suitable for both current and previous design in-line and 90º PS Series Swivels.
3/8” Swivel 1/2” Swivel 3/4” Swivel 1” Swivel
PS6-RPR PS8-RPR PS12-RPR PS16-RPR
PS6Y-RPR PS8Y-RPR PS12Y-RPR PS16Y-RPR
PS6A-RPR PS8A-RPR PS12A-RPR PS16A-RPR
PS6W-RPR PS8W-RPR PS12W-RPR PS16W-RPR
H2C-PS = Bearing Removal Pneumatic Nipple

Minneapolis, MN
Swivels PS Series
In-Line
Materials Of Construction
Housing:...........................................................Carbon Steel
Shaft:................................................................Carbon Steel
Plating:..................................................... Chromium-6 Free
Bearing:................................................................... Chrome
O-Rings:..................................................................... Nitrile
Back-Up Ring .............................................................. PTFE
D Swivels
Male Pipe - Female Pipe
A
B
Hex 1 Hex 2
Port 1
Port 2
Part Number A B Port 1 Port 2 Wrench Flats 1 Wrench Flats 2

2.66” 1.64” 3/8-18 3/8-18 .88” 1.31”
PS610102-6-6
67.5 mm 41.7 mm NPTF NPTF 22.2 mm 33.3 mm
3.03” 1.79” 1/2-14 1/2-14 1.12” 1.50”

PS810102-8-8
3.10” 1.85” 3/4-14 3/4-14 1.38” 1.69”

PS1210102-12-12
3.54” 2.11” 1-11 1/2 1-11 1/2 1.62” 1.88”

PS1610102-16-16

Minneapolis, MN
Swivels PS Series
In-Line
Male Pipe - Female 37° Flair

A
B
Hex 1 Hex 2
Port 1
Port 2

2.77” 1.75” 3/8-18 9/16-18 .88” 1.31”
PS610106-6-6
70.3 mm 44.5 mm NPTF UNF 22.2 mm 33.3 mm
3.05” 1.81” 1/2-14 3/4-16 1.12” 1.50”

PS810106-8-8
77.3 mm 46.0 mm NPTF UNF 28.6 mm 36.5 mm
3.27” 2.02” 3/4-14 1-1/16-12 1.38” 1.69”

PS1210106-12-12
83.2 mm 51.3 mm NPTF UN 35.0 mm 42.9 mm
3.62” 2.19” 1-11 1/2 1-5/16-12 1.62” 1.88”

PS1610106-16-16
92.0 mm 55.6 mm NPTF UN 41.3 mm 47.6 mm
Male 37° Flare - Female Pipe

A
B
Hex 1
Hex 2
Port 1
Port 2
D Swivels

2.66” 1.64” 9/16-18 3/8-18 .88” 1.31”
PS610302-6-6
67.5 mm 41.7 mm UNF NPTF 22.2 mm 33.3 mm
2.89” 1.79” 3/4-16 1/2-14 1.12” 1.50”

PS810302-8-8
3.21” 1.85” 1-1/16-12 3/4-14 1.38” 1.69”

PS1210302-12-12
81.5 mm 47.0 mm UN NPTF 35.0 mm 42.9 mm
3.54” 2.11” 1-5/16-12 1-11 1/2 1.62” 1.88”

PS1610302-16-16
89.8 mm 53.5 mm UN NPTF 41.3 mm 47.6 mm
Male 37° Flare - Female 37° Flare

A
Hex 1 B
Hex 2
Port 1
Port 2

2.77” 1.75” 9/16-18 9/16-18 .88” 1.31”
PS610306-6-6
70.3 mm 44.5 mm UNF UNF 22.2 mm 33.3 mm
2.91” 1.81” 3/4-16 3/4-16 1.12” 1.50”

PS810306-8-8
74.0 mm 46.0 mm UNF UNF 28.6 mm 36.5 mm
3.38” 2.02” 1-1/16-12 1-1/16-12 1.38” 1.69”

PS1210306-12-12
85.8 mm 51.3 mm UN UN 35.0 mm 42.9 mm
3.62” 2.19” 1-5/16-12 1-5/16-12 1.62” 1.88”

PS1610306-16-16
92.0 mm 55.6 mm UN UN 41.3 mm 47.6 mm

Minneapolis, MN
Swivels PS Series
In-Line
Male SAE O-Ring Straight Thread - Female Pipe

A
B
Hex 2
Hex 1
Port 1
Port 2

2.48” 1.64” 9/16-18 3/8-18 .88” 1.31”
PS610502-6-6
2.79” 1.79” 3/4-16 1/2-14 1.12” 1.50”

PS810502-8-8
3.02” 1.85” 1-1/16-12 3/4-14 1.38” 1.69”

PS1210502-12-12
76.7 mm 47.0 mm UN NPTF 35.0 mm 42.9 mm
3.31” 2.11” 1-5/16-12 1-11 1/2 1.62” 1.88”

PS1610502-16-16
84.1 mm 53.5 mm UN NPTF 41.3 mm 47.6 mm
Male SAE O-Ring Straight Thread - Female 37° Flare

A
B
Hex 1 Hex 2
Port 1
Port 2
D Swivels
2.59” 1.75” 9/16-18 9/16-18 .88” 1.31”
PS610506-6-6
65.8 mm 44.5 mm UNF UNF 22.2 mm 33.3 mm
2.81” 1.81” 3/4-16 3/4-16 1.12” 1.50”

PS810506-8-8
71.3 mm 46.0 mm UNF UNF 28.6 mm 36.5 mm
3.19” 2.02” 1-1/16-12 1-1/16-12 1.38” 1.69”

PS1210506-12-12
81.1 mm 51.3 mm UN UN 35.0 mm 42.9 mm
3.40” 2.19” 1-5/16-12 1-5/16-12 1.62” 1.88”

PS1610506-16-16
86.3 mm 55.6 mm UN UN 41.3 mm 47.6 mm
Male Seal-Lok - Male Seal-Lok

A
Hex 2
Hex 1 B
Port 1 Port 2

2.67” 1.83” 11/16 - 16 11/16 - 16 .88” 1.31”
PS61JMJM-6-6
67.8 mm 46.5 mm UN UN 22.2 mm 33.3 mm
2.89” 1.90” 13/16 - 16 13/16 - 16 1.12” 1.50”

PS81JMJM-8-8
73.4 mm 48.3 mm UN UN 28.6 mm 38.1 mm
3.26” 2.09” 1-3/16 - 12 1-3/16 - 12 1.38” 1.75”

PS121JMJM-12-12
82.8 mm 53.1 mm UN UN 35.0 mm 4.44 mm
3.41” 2.20” 1-7/16 - 12 1-7/16 - 12 1.62” 1.88”

PS161JMJM-16-16
86.6 mm 55.9 mm UN UN 41.3 mm 47.8 mm

Minneapolis, MN
Swivels PS Series
90º
Materials Of Construction
Housing:...........................................................Carbon Steel
Shaft:................................................................Carbon Steel
Plating:..................................................... Chromium-6 Free
Bearing:................................................................... Chrome
O-Rings:..................................................................... Nitrile
Back-Up Ring .............................................................. PTFE
Port 2
Hex 2
Hex 1
Port 1 O-Ring
Housing
O-Ring
Back-Up Ring
Cap Screw
Bearing
D Swivels
O-Ring
Shaft

A
B
Hex 1
Port 2
Port 1
DIA
Part Number A B Diameter Port 1 Port 2 Wrench Flats 1

3.05” 2.54” 1.29” 3/8-18 3/8-18 .88”
PS690102-6-6
77.4 mm 64.4 mm 32.8 mm NPTF NPTF 22.2 mm
3.43” 2.84” 1.49” 1/2-14 1/2-14 1.12”

PS890102-8-8
3.66” 3.00” 1.76” 3/4-14 3/4-14 1.38”

PS1290102-12-12
4.41” 3.54” 2.16” 1-11 1/2 1-11 1/2 1.62”

PS1690102-16-16

Minneapolis, MN
Swivels PS Series
90º
Male Pipe - Male 37° Flare

A Port 2
B DIA
Hex 2
Hex 1
C
Port 1
D
Wrench Wrench
Part Number A B C D Diameter Port 1 Port 2
Flats 1 Flats 2
3.05” 2.54” 1.44” 2.09” 1.29” 3/8-18 9/16-18 .88” .69”
PS690103-6-6
77.4 mm 64.4 mm 36.6 mm 53.0 mm 32.8 mm NPTF UNF 22.2 mm 17.5 mm
3.43” 2.84” 1.78” 2.64” 1.73” 1/2-14 3/4-16 1.12” .88”

PS890103-8-8
87.0 mm 72.0 mm 45.1 mm 67.1 mm 44.0 mm NPTF UNF 28.6 mm 22.2 mm
3.66” 3.00” 2.24” 3.86” 2.17” 3/4-14 1-1/16-12 1.38” 1.25”

PS1290103-12-12
93.0 mm 76.1 mm 56.9 mm 85.3 mm 55.2 mm NPTF UN 35.0 mm 31.8 mm
4.41” 3.54” 2.42” 3.66” 2.48” 1-11 1/2 1-5/16-12 1.62” 1.50”
PS1690103-16-16
Male Pipe - Female NPSM Pipe Swivel
B DIA
Port 2
Hex 1 Hex 2
C
Port 1
D
D Swivels
Wrench Wrench
Flats 1 Flats 2
3.05” 2.54” 1.51” 2.16” 1.29” 3/8-18 3/8-18 .88” .88”
PS690107-6-6
77.4 mm 64.4 mm 38.4 mm 54.8 mm 32.8 mm NPTF NPSM 22.2 mm 22.2 mm
3.43” 2.84” 1.86” 2.72” 1.73” 1/2-14 1/2-14 1.12” 1.00”

PS890107-8-8
3.66” 3.00” 2.24” 3.33” 2.17” 3/4-14 3/4-14 1.38” 1.25”

PS1290107-12-12
4.41” 3.54” 2.48” 3.73” 2.48” 1-11 1/2 1-11 1/2 1.62” 1.50”
PS1690107-16-16
Male Pipe - Female SAE Straight Thread
B Port 2
Hex 1
Port 1
DIA
Part Number A B Diameter Port 1 Port 2 Wrench Flats 1

3.05” 2.54” 1.29” 3/8-18 9/16-18 .88”
PS690110-6-6
77.4 mm 64.4 mm 32.8 mm NPTF UNF 22.2 mm
3.43” 2.84” 1.73” 1/2-14 3/4-16 1.12”

PS890110-8-8
87.0 mm 72.0 mm 44.0 mm NPTF UNF 28.6 mm
3.66” 3.00” 2.17” 3/4-14 1-1/16-12 1.38”

PS1290110-12-12
93.0 mm 76.1 mm 55.2 mm NPTF UN 35.0 mm
4.41” 3.54” 2.48” 1-11 1/2 1-5/16-12 1.62”

PS1690110-16-16
112.0 mm 90.0 mm 63.0 mm NPTF UN 41.3 mm

Minneapolis, MN
Swivels PS Series
90º
Male Pipe - Male Seal-Lok

A
B Port 2 DIA
Hex 2
Hex 1
C
Port 1
D
Wrench Wrench
Flats 1 Flats 2
3.05” 2.54” 1.40” 2.05” 1.29” 3/8-18 11/16-16 .88” .69”
PS6901JM-6-6
3.43” 2.84” 1.74” 2.60” 1.73” 1/2-14 13/16-16 1.12” .88”
PS8901JM-8-8
3.66” 3.00” 2.18” 3.27” 2.17” 3/4-14 1-3/16-12 1.38” 1.25”
PS12901JM-12-12
4.41” 3.54” 2.34” 3.59” 2.48” 1-11 1/2 1-7/16-12 1.62” 1.50”
PS16901JM-16-16
Male 37° Flare - Female Pipe

A
B
Hex 1 Port 2
Port 1
DIA
D Swivels

3.05” 2.54” 9/16-18 3/8-18 1.29” .88”
PS690302-6-6
3.29” 2.70” 3/4-16 1/2-14 1.49” 1.12”

PS890302-8-8
3.76” 3.10” 1-1/16-12 3/4-14 1.76” 1.38”

PS1290302-12-12
95.6 mm 78.8 mm UN NPTF 44.6 mm 35.0 mm
4.41” 3.54” 1-5/16-12 1-11 1/2 2.16” 1.62”

PS1690302-16-16
112.0 mm 90.0 mm UN NPTF 54.9 mm 41.3 mm
Male 37° Flare - Male 37° Flare

A
B DIA
Port 2
Hex 1 Hex 2
C
Port 1
D
Wrench Wrench
Flats 1 Flats 2
3.05” 2.54” 1.44” 2.09” 1.29” 9/16-18 9/16-18 .88” .69”
PS690303-6-6
77.4 mm 64.4 mm 36.6 mm 53.0 mm 32.8 mm UNF UNF 22.2 mm 17.5 mm
3.29” 2.70” 1.78” 2.64” 1.73” 3/4-16 3/4-16 1.12” .88”

PS890303-8-8
3.39” 2.80” 1.90” 2.77” 1.73” 7/8-14 7/8-14 1.12” .88”

PS890303-10-10
3.76” 3.10” 2.24” 3.86” 2.17” 1-1/16-12 1-1/16-12 1.38” 1.25”

PS1290303-12-12
95.6 mm 78.8 mm 56.9 mm 85.3 mm 55.2 mm UN UN 35.0 mm 31.8 mm
4.41” 3.54” 2.42” 3.66” 2.48” 1-5/16-12 1-5/16-12 1.62” 1.50”

PS1690303-16-16

Minneapolis, MN
Swivels PS Series
90º
Male 37° Flare - Female NPSM Pipe Swivel

A
Port 2
B DIA
Hex 2
Hex 1
C
Port 1
D
Wrench Wrench
Flats 1 Flats 2
3.05” 2.54” 1.51” 2.16” 1.29” 9/16-18 3/8-18 .88” .88”
PS690307-6-6
77.4 mm 64.4 mm 38.4 mm 54.8 mm 32.8 mm UNF NPSM 22.2 mm 22.2 mm
3.29” 2.70” 1.86” 2.72” 1.73” 3/4-16 1/2-14 1.12” 1.00”

PS890307-8-8
3.76” 3.10” 2.24” 3.33” 2.17” 1-1/16-12 3/4-14 1.38” 1.25”

PS1290307-12-12
95.6 mm 78.8 mm 56.9 mm 84.5 mm 55.2 mm UN NPSM 35.0 mm 31.8 mm
4.41” 3.54” 2.48” 3.73” 2.48” 1-5/16-12 1-11 1/2 1.62” 1.50”
PS1690307-16-16
Male 37° Flare - Female SAE Straight Thread

A
B
Hex 1 Port 2
Port 1
D Swivels
DIA
Part Number A B Diameter Port 1 Port 2 Wrench Flats

3.05” 2.54” 1.29” 9/16-18 9/16-18 .88”
PS690310-6-6
77.4 mm 64.4 mm 32.8 mm UNF UNF 22.2 mm
3.29” 2.70” 1.73” 3/4-16 3/4-16 1.12”

PS890310-8-8
83.7 mm 68.7 mm 44.0 mm UNF UNF 28.6 mm
3.76” 3.10” 2.17” 1-1/16-12 1-1/16-12 1.38”

PS1290310-12-12
95.6 mm 78.8 mm 55.2 mm UN UN 35.0 mm
4.41” 3.54” 2.48” 1-1/16-12 1-1/16-12 1.62”

PS1690310-16-16
112.0 mm 90.0 mm 63.0 mm UN UN 41.3 mm
B Port 2
Hex 1
Port 1
DIA

2.87” 2.36” 1.29” 9/16-18 3/8-18 .88”
PS690502-6-6
72.8 mm 59.8 mm 32.8 mm UNF NPTF 22.2 mm
3.19” 2.60” 1.49” 3/4-16 1/2-14 1.12”

PS890502-8-8
80.9 mm 65.9 mm 37.8 mm UNF NPTF 28.6 mm
3.58” 2.92” 1.76” 1-1/16-12 3/4-14 1.38”

PS1290502-12-12
90.9 mm 74.0 mm 44.6 mm UN NPTF 35.0 mm
4.18” 3.32” 2.16” 1-5/16-12 1-11 1/2 1.62”

PS1690502-16-16
106.3 mm 84.3 mm 54.9 mm UN NPTF 41.3 mm

Minneapolis, MN
Swivels PS Series
90º
Male SAE O-Ring Straight Thread - Male 37° Flare

A
B DIA
Port 2
Hex 1 Hex 2
C
Port 1
D
Wrench Wrench
Flats 1 Flats 2
2.87” 2.36” 1.44” 2.09” 1.29” 9/16-18 9/16-18 .88” .69”
PS690503-6-6
3.19” 2.60” 1.78” 2.64” 1.73” 3/4-16 3/4-16 1.12” .88”

PS890503-8-8
3.25” 2.66” 1.90” 2.77” 1.73” 7/8-14 7/8-14 1.12” .88”

PS890503-10-10
3.58” 2.92” 2.24” 3.86” 2.17” 1-1/16-12 1-1/16-12 1.38” 1.25”

PS1290503-12-12
4.18” 3.32” 2.42” 3.66” 2.48” 1-5/16-12 1-5/16-12 1.62” 1.50”

PS1690503-16-16
Male SAE O-Ring Straight Thread - Female NPSM Pipe Swivel

A
B Port 2 DIA
Hex 2
Hex 1
C
Port 1 D
D Swivels
Wrench Wrench
Flats 1 Flats 2
2.87” 2.36” 1.51” 2.16” 1.29” 9/16-18 3/8-18 .88” .88”
PS690507-6-6
3.19” 2.60” 1.86” 2.72” 1.73” 3/4-16 1/2-14 1.12” 1.00”

PS890507-8-8
3.58” 2.92” 2.24” 3.33” 2.17” 1-1/16-12 3/4-14 1.38” 1.25”

PS1290507-12-12
4.18” 3.32” 2.48” 3.73” 2.48” 1-5/16-12 1-11 1/2 1.62” 1.50”
PS1690507-16-16
Male SAE O-Ring Straight Thread - Female SAE Straight Thread

A
B
Hex 1 Port 2
Port 1
DIA

2.87” 2.36” 1.29” 9/16-18 9/16-18 .88”
PS690510-6-6
72.8 mm 59.8 mm 32.8 mm UNF UNF 22.2 mm
3.19” 2.60” 1.73” 3/4-16 3/4-16 1.12”

PS890510-8-8
80.9 mm 65.9 mm 44.0 mm UNF UNF 28.6 mm
3.58” 2.92” 2.17” 1-1/16-12 1-1/16-12 1.38”

PS1290510-12-12
90.9 mm 74.0 mm 55.2 mm UN UN 35.0 mm
4.18” 3.32” 2.48” 1-5/16-12 1-5/16-12 1.62”

PS1690510-16-16
106.3 mm 84.3 mm 63.0 mm UN UN 41.3 mm

Minneapolis, MN
Swivels S Series
Introduction
Introduction
The S Series Swivel product line complements the Quick
Coupling Division’s PS Series swivel line by offering a pressure
balanced, compact forged body design. As a result of the
pressure balanced design, the S Series Swivel does not
experience a significant increase in torque as pressure rises.
The housing body is forged to provide superior performance
and durability in tough applications. This product is great
for eliminating hose twist, torque and stress caused by the
movement of the hydraulic components where side load to the
swivel can be minimized.
Features
• 3000 psi working pressure rating for all sizes.
• Nitrile Seals
• Torque value does not significantly increase with pressure.
• Dust seals protect the swivel from damaging environmental
contaminants.
Performance Data • Field service kits are available for quick and reliable repairs.
• 360° swivel eliminates long radius bends, hose twist and
S Series Swivel (1/4”, 3/8”, 1/2”, 3/4”) stress that can cause premature hose failure.
Test Fluid: Oil - 150 SUS vs. Pressure Drop
40 • One piece forged housing eliminates a brazed 90°
adapter connection.
• Case hardened for enhanced service life.
35
3/8"
• Compact design to fit into tight areas.
D Swivels
1/2" 3/4"
30
S Series Swivel Specifications
Body Size 1/4 3/8 1/2 3/4
25 Maximum Rated
3000 3000 3000 3000
Pressure (psi)
Temperature Range -40° to 250° F
20
Maximum RPM 10
15
1/4"
10
0
0 5 10 15 20 25 30 35 40 45
Flow in USGPM
S Series Repair Kits

Repair Kits come complete with primary O-Rings, PTFE back-up rings, external and internal dust seals, retaining ring and
instruction sheet.
Nitrile Seals
Size Kit Number
-4/-6 RK-4/6N
-8/-10 RK-8N
-12 RK-12N

Minneapolis, MN
Swivels S Series
How To Order
Port 2
Port 1
Shaft
O-Ring
Back-Up Ring
O-Ring
Flow Holes
Housing
O-Ring
Back-Up Ring
O-Ring
Retainer
Retaining Ring
S Part Number:
S 21 02 - 8 - 8
D Swivels
Housing Port Size (1/16 of an inch)

4 = 1/4
6 = 3/8
8 = 1/2
12 = 3/4
Shaft Port Size (1/16 of an inch)
4 = 1/4
6 = 3/8
8 = 1/2
12 = 3/4
Housing Port Configuration:
02 = Female NPTF
03 = Male JIC 37 Degree
07 = Female NPSM Pipe Swivel
Shaft Port Configuration:

21 = Male NPTF
22 = Female NPTF
25 = Male SAE O-Ring Straight Thread
Parker S Series Swivel designator

Minneapolis, MN
Swivels S Series
90º

A
B Hex 1
Port 1
Port 2 Hex 2
Wrench Wrench
Part Number A B C D Port 1 Port 2
Flats 1 Flats 2
2.31” 1.51” 1.78” 1.09” 1/4-18 1/4-18 .88” .88”
S2102-4-4
58.7 mm 38.4 mm 45.1 mm 27.6 mm NPTF NPTF 22.2 mm 22.2 mm
2.31” 1.51” 1.78” 1.09” 3/8-18 3/8-18 .88” .88”

S2102-6-6
2.74” 1.84” 2.10” 1.35” 1/2-14 1/2-14 1.06” 1.00”

S2102-8-8
3.35” 2.12” 2.39” 1.50” 3/4-14 3/4-14 1.38” 1.38”

S2102-12-12
Male Pipe - Female NPSM Pipe Swivel

A
B Hex 1
Port 1
Port 2
D Swivels
Hex 2
Wrench Wrench
Flats 1 Flats 2
2.31” 1.51” 2.05” 1.36” 1/4-18 1/4-18 .88” .69”
S2107-4-4
58.7 mm 38.4 mm 52.0 mm 34.5 mm NPTF NPSM 22.2 mm 17.5 mm
2.31” 1.51” 2.07” 1.38” 3/8-18 3/8-18 .88” .88”

S2107-6-6
2.74” 1.84” 2.32” 1.57” 1/2-14 1/2-14 1.06” 1.00”

S2107-8-8
3.35” 2.12” 2.74” 1.85” 3/4-14 3/4-14 1.38” 1.25”

S2107-12-12
Female Pipe - Female Pipe

A
B Hex 1
Port 1
Port 2 Hex 2
Wrench Wrench
Flats 1 Flats 2
2.19” 1.39” 1.78” 1.09” 1/4-18 1/4-18 .88” .88”
S2202-4-4
2.19” 1.39” 1.78” 1.09” 3/8-18 3/8-18 .88” .88”

S2202-6-6
2.47” 1.57” 2.10” 1.35” 1/2-14 1/2-14 1.06” 1.00”

S2202-8-8
3.15” 1.92” 2.39” 1.50” 3/4-14 3/4-14 1.38” 1.38”

S2202-12-12

Minneapolis, MN
Swivels S Series
90º
Female Pipe - Female NPSM Pipe Swivel

A
B Hex 1
Port 1
Port 2 Hex 2
Wrench Wrench
Flats 1 Flats 2
2.19” 1.39” 2.05” 1.36” 1/4-18 1/4-18 .88” .69”
S2207-4-4
2.19” 1.39” 2.07” 1.38” 3/8-18 3/8-18 .88” .88”

S2207-6-6
2.47” 1.57” 2.32” 1.57” 1/2-14 1/2-14 1.06” 1.00”

S2207-8-8
3.15” 1.92” 2.74” 1.85” 3/4-14 3/4-14 1.38” 1.25”

S2207-12-12

A
B Hex 1
Port 1
Port 2
D Swivels
Hex 2
Wrench Wrench
Flats 1 Flats 2
2.13” 1.33” 1.78” 1.09” 9/16-18 3/8-18 .88” .88”
S2502-6-6
54.1 mm 33.8 mm 45.1 mm 27.6 mm UNF NPTF 22.2 mm 22.2 mm
2.40” 1.50” 2.10” 1.35” 3/4-16 1/2-14 1.06” 1.00”

S2502-8-8
61.0 mm 38.2 mm 53.3 mm 34.3 mm UNF NPTF 27.0 mm 25.4 mm
3.40” 2.17” 2.39” 1.50” 1-1/16-12 3/4-14 1.38” 1.38”

S2502-12-12
86.4 mm 55.2 mm 60.7 mm 38.0 mm UN NPTF 34.9 mm 34.9 mm
Male SAE O-Ring Straight Thread - Female NPSM Pipe Swivel

A
B Hex 1
Port 1
Port 2 Hex 2
Wrench Flats Wrench

1 Flats 2
2.13” 1.33” 2.07” 1.38” 9/16-18 3/8-18 .88” .88”
S2507-6-6
54.1 mm 33.8 mm 52.5 mm 35.1 mm UNF NPSM 22.2 mm 22.2 mm
2.40” 1.50” 2.32” 1.57” 3/4-16 1/2-14 1.06” 1.00”

S2507-8-8
Swivels 61.0 mm 38.2 mm 59.0 mm
S Series
39.9 mm UNF NPSM 27.0 mm 25.4 mm
3.75” 2.17” 2.74” 1.85” 1-1/16-12 3/4-14 1.38” 1.25”

S2507-12-12
86.4 mm 55.2 mm 69.5 mm
90º
46.9 mm UN NPSM 34.9 mm 31.8 mm

Minneapolis, MN
Valves
Multiple Hydraulic System Applications As oil is drawn from the reservoir and pumped to the circuit,
a vacuum is created in the reservoir. The vacuum relief valve
Parker Check Valves are unidirectional flow control devices opens to allow filtered air to enter. As oil is pumped back
used primarily in hydraulic systems to eliminate potential into the reservoir, air pressure builds. Additionally, as the oil
damage caused by fluid back pressure. Offered in many heats, the pressure inside the reservoir increases. When the
configurations, Parker can satisfy most hydraulic system pressure exceeds the relief valve setting, the excess pressure
applications. Parker’s in-line style check valves are available in is vented to atmosphere. Normally, the pressure will fluctuate
a variety of sizes, pressure ratings, flow capacities and between zero and the pressure relief setting without opening
crack pressures. either valve. This can significantly reduce the breathing
of outside air and minimize the chance for moisture and
contamination to enter.
H1, HM1 and PV Series Pressure / Vacuum Relief Valves are
used to create and maintain a positive pressure in hydraulic TH Series Thermal Bypass Valves ensure efficient equipment
tanks and reservoirs. These pressurized reservoir valves operation at any temperature. These valves are ideally
provide the following benefits: suited for hydrostatic drive circuits which require fast warm-
up, controlled fluid temperatures and low return line back
• Prevents pump cavitation by assuring a positive
pressure. When installed in a return line of a hydraulic
supply of oil at the pump inlet
circuit that utilizes an oil cooler, this valve will modulate fluid
• Minimizes the tank breathing of outside, moist, temperature by either shifting return line flow through the
contaminated air cooler, or bypassing directly to the reservoir. An integral
• Filters all incoming air pressure relief function automatically releases excess
pressure to the reservoir if the cooler becomes restricted and
the inlet pressure becomes excessive.
E Valves
E-1 Parker Hannifin Corporation

Minneapolis, MN
Table of Contents Introduction ......................................................... E-1
Check Valves
Selection Guide & General
Technical Information .......................................... E-3
DT Series............................................................ E-4
Ordering Information............................................ E-8
CV Series............................................................ E-9
Ordering Information........................................... E-11
DC Series ..........................................................E-12
Ordering Information...........................................E-13
CPIFF Series (soft seat).......................................E-14
S6C Series (soft seat).........................................E-15
3C Series (soft seat)...........................................E-15
2600 Series (swing type).....................................E-17

E Valves
Pressure/Vacuum Relief Valves

H1 & HM1 Series ................................................E-18
PV Series...........................................................E-19
Thermal Bypass Valves

TH Series ......................................................... E-20

Minneapolis, MN
Check Valves Technical Information
Parker’s Check Valves have several unique features that

insure years of trouble-free operation.
Selection Guide
Crack
Rated
Body Pressure
Series Material Type Pressure
Size Range
(psi)
(psi)
CV Series 1/4 - 1” Metal 3000 5-130
1/4 - 1 to
DT Series Steel 2500-5000 5-200
1/4” Metal
DC Series 1/4 - 2” Seal 3000 5-100
CPIFF
1/4 - 1” Steel 5000 5-65
Series
3C Series 1 1/4 - 2” Steel Soft 3000 5-65
316 Seat
S6C
1/4 - 1” Stainless 6000 5-65
Series
Steel
Crack Pressure
Pressure at inlet port. Crack pressure refers to the amount of fluid pressure in the
Poppet is moved off seat.
free flow direction required to move the poppet off the seat.
Flow is allowed through valve.
The normal crack pressure setting is 5 PSI; however, other
Poppet
Seat crack pressures are available to allow the check valve to
perform special circuit functions, or operate under unique
conditions.
Check valves are not field repairable or adjustable.
Inlet Port Outlet Port Crack pressure settings are made at the factory only.
Applications
Typical hydralic circuit, the check valve is used to protect the
pump by preventing pressure from returning to the outlet
port of the pump.
Pressure at outlet port.

Poppet is against seat.
Flow is blocked at seat.
Poppet
E Valves
Seat
CHECK
VALVE
PUMP
RELIEF
CONTROL
Inlet Port Outlet Port TANK VALVE
VALVE
TANK CYLINDER
The graphic symbol for a check-valve is:
Oil cooler bypass circuit. If return line pressure becomes

excessive due to resistance through oil cooler (such as
startup in cold weather). Check valve opens and allows oil to
bypass the cooler and flow to the tank.

Minneapolis, MN
Check Valves DT Series
Metal Seal
Parker DT Series Check Valves Offer the Features

of a Compact Body Size, and up to 5000 psi
Maximum Operating Pressure.
The DT Series check valves utilize the dependable, internal
design features found in Parker check valves, but with the
added benefit and convenience of compact design. Sizes are
available from 1/4” to 1-1/4” with six different Fitting Styles.
The DT Series expands Parker’s high quality product line of
versatile and efficient check valves.
Features
• Compact Design. Easy to plumb into tight circuits.
• All steel construction. No internal gaskets or seals to wear out.
• O
ne-piece body eliminates threads and seals that may be
potential leakage points.
• S
mooth flow stream. Poppet spring is isolated from flow
stream.
• Variety of end fittings.
Specifications
• Optional crack pressures available from 1 to 200 PSI.
The DT Series check valves have a Maximum Operating
Pressure of 2500-5000 PSI. Standard crack pressures are • Chromium-6 Free plated exterior finish.
1, 5, and 65 PSI depending on the port size and configuration. • Nitrile O-Ring included on MO and MS fittings.
Other crack pressures up to 200 PSI in 5 PSI increments
are available upon request. • Captive O-Ring Groove is standard on MS end fittings.
FLOW FLOW FLOW

E Valves
DT-MFMF DT-MFMO DT-MOMF

Male Flare 37° JIC Inlet to Male Flare 37° JIC Outlet Male Flare 37° JIC Inlet to Male O-Ring Boss Outlet Male O-Ring Boss Inlet to Male Flare 37° JIC Outlet
FLOW FLOW FLOW
DT-MOMS DT-MSMO DT-MSMS

Male O-Ring Boss Inlet to Male Seal-Lok® Outlet Male Seal-Lok® Inlet to Male O-Ring Boss Outlet Male Seal-Lok® Inlet to Male Seal-Lok® Outlet

Minneapolis, MN
Metal Seal
DT-MFMF Male Flare 37° JIC Inlet to Male Flare 37° JIC Outlet
FLOW
A F E
Hex
B C D
Outlet Port
Valve Inlet Port Thread Dimensions (in.) Wrench Flats ** Std Crack
Part Number Thread
Size Pressure (psi)
A B C D E F
3/8 DT-370-MFMF-** 9/16-18 UNF .56 .44 .56 9/16-18 UNF .75 1, 5, 65
1/2 DT-500-MFMF-** 3/4-16 UNF .66 .50 .66 3/4-16 UNF .88 5, 65
5/8 DT-620-MFMF-** 7/8-14 UNF .76 .50 .76 7/8-14 UNF 1.06 5
3/4 DT-750-MFMF-** 1-1/16 - 12 UN .86 .50 .86 1-1/16-12 UN 1.25 1, 5, 65
1 DT-1000-MFMF-** 1-5/16 - 12 UN .91 .62 .91 1-5/16-12 UN 1.50 5, 65
1-1/4 DT-1250-MFMF-** 1-5/8 - 12 UN .96 1.06 .96 1-5/8-12 UN 1.88 1, 5
DT-MFMO Male Flare 37° JIC Inlet to Male O-Ring Boss Outlet
FLOW
A F E
Hex
B C D
Outlet Port
Part Number Thread
Size Pressure (psi)
A B C D E F
3/8 DT-370-MFMO-** 9/16-18 UNF .56 .44 .47 9/16-18 UNF .75 1, 5, 65
1/2 DT-500-MFMO-** 3/4-16 UNF .66 .50 .55 3/4-16 UNF .88 5, 65
5/8 DT-620-MFMO-** 7/8-14 UNF .76 .50 .63 7/8-14 UNF 1.06 5
E Valves
3/4 DT-750-MFMO-** 1-1/16 - 12 UN .86 .50 .73 1-1/16 - 12 UN 1.25 1, 5, 65
1 DT-1000-MFMO-** 1-5/16 - 12 UN .91 .62 .73 1-5/16 - 12 UN 1.50 5, 65
1-1/4 DT-1250-MFMO-** 1-5/8 - 12 UN .96 1.06 .73 1-5/8 - 12 UN 1.88 1, 5

Minneapolis, MN
Metal Seal
DT-MOMF Male O-Ring Boss Inlet to Male Flare 37° JIC Outlet
FLOW
A F E
Hex
B C D
Outlet Port
Part Number Thread
Size Pressure (psi)
A B C D E F
1/4 DT-250-MOMF-** 7/16-20 UNF .43 .44 .55 7/16-20 UNF .62 5
3/8 DT-370-MOMF-** 9/16-18 UNF .47 .44 .56 9/16-18 UNF .75 1, 5, 65
1/2 DT-500-MOMF-** 3/4-16 UNF .55 .50 .66 3/4-16 UNF .88 5, 65
5/8 DT-620-MOMF-** 7/8-14 UNF .63 .50 .76 7/8-14 UNF 1.06 5
3/4 DT-750-MOMF-** 1-1/16 - 12 UN .73 .50 .86 1-1/16 - 12 UN 1.25 1, 5, 65
1 DT-1000-MOMF-** 1-5/16 - 12 UN .73 .62 .91 1-5/16 - 12 UN 1.50 5, 65
1-1/4 DT-1250-MOMF-** 1-5/8 - 12 UN .73 1.06 .96 1-5/8 - 12 UN 1.88 1, 5
DT-MOMS Male O-Ring Boss Inlet to Male Seal-Lok® Outlet
FLOW
A F E
Hex
B C D
Outlet Port
Part Number Thread
Size Pressure (psi)
A B C D E F
1/4 DT-250-MOMS-** 7/16-20 UNF .43 .45 .39 9/16-18 UNF .62 5
3/8 DT-370-MOMS-** 9/16-18 UNF .47 .44 .44 11/16-16 UN .75 1, 5, 65
E Valves
1/2 DT-500-MOMS-** 3/4-16 UNF .55 .50 .51 13/16-16 UN .88 5, 65

5/8 DT-620-MOMS-** 7/8-14 UNF .63 .50 .62 1-14 UNS 1.06 5
3/4 DT-750-MOMS-** 1-1/16 - 12 UN .73 .50 .68 1-3/16 - 12 UN 1.25 1, 5, 65
1 DT-1000-MOMS-** 1-5/16 - 12 UN .73 .62 .70 1-7/16 - 12 UN 1.50 5, 65
1-1/4 DT-1250-MOMS-** 1-5/8 - 12 UN .73 1.06 .70 1-11/16 - 12 UN 1.88 1, 5

Minneapolis, MN
Metal Seal
DT-MSMO Male Seal-Lok® Inlet to Male O-Ring Boss Outlet
FLOW
A F E
Hex
B C D
Outlet Port
Valve Part Number Inlet Port Thread Dimensions (in.) Wrench Flats ** Std Crack
Thread
Size Pressure (psi)
A B C D E F
3/8 DT-370-MSMO-** 11/16-16 UN .44 .44 .47 9/16-18 UNF .75 1, 5, 65
1/2 DT-500-MSMO-** 13/16-16 UN .51 .50 .55 3/4-16 UNF .88 5, 65
5/8 DT-620-MSMO-** 1-14 UNS .62 .49 .63 7/8-14 UNF 1.06 5
3/4 DT-750-MSMO-** 1-3/16 - 12 UN .68 .50 .73 1-1/16 - 12 UN 1.25 1, 5, 65
1 DT-1000-MSMO-** 1-7/16 - 12 UN .70 .62 .73 1-5/16 - 12 UN 1.50 5, 65
1-1/4 DT-1250-MSMO-** 1-11/16 - 12 UN .70 1.06 .73 1-5/8 - 12 UN 1.88 1, 5
DT-MSMS Male Seal-Lok® Inlet to Male Seal-Lok® Outlet
FLOW
A F E
Hex
B C D
Outlet Port
Valve Part Number Inlet Port Thread Dimensions (in.) Wrench Flats ** Std Crack
Thread
Size Pressure (psi)
A B C D E F
3/8 DT-370-MSMS-** 11/16-16 UN .44 .44 .44 11/16-16 UN .75 1, 5, 65
1/2 DT-500-MSMS-** 13/16-16 UN .51 .50 .51 13/16-16 UN .88 5, 65
5/8 DT-620-MSMS-** 1-14 UNS .62 .50 .62 1-14 UNS 1.06 5
E Valves
3/4 DT-750-MSMS-** 1-3/16 -12 UN .68 .50 .68 1-3/16 - 12 UN 1.25 1, 5, 65
1 DT-1000-MSMS-** 1-7/16 - 12 UN .70 .62 .70 1-7/16 - 12 UN 1.50 5, 65
1-1/4 DT-1250-MSMS-** 1-11/16 - 12 UN .70 1.06 .70 1-11/16 - 12 UN 1.88 1, 5

Minneapolis, MN
Metal Seal
Flow Data DT Series (1/4" & 3/8") DT Series (1/2", 5/8" & 3/4")
110 100
100 90

90 80
3/4"
80 70 (DT-750)
1/4"
70 (DT-250) 60
60 50
3/8" 1/2" & 5/8"
50 (DT-370) 40 (DT-500 / DT-620)
40 30
30
20
20
10
10
0
0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32
0 1 2 3 4 5 6 7 8 9 10 Flow in USGPM
Flow in USGPM
DT Series (1" & 1-1/4")

200
180 Specifications
160 Crack
Body Rated
Series Material Pressure Pressure
Size (in.) (psi) Range
140 (psi)
120
DT Series 1/4 - 1 1/4 Steel 2500-5000 5-200
100
1"
80 (DT-1000)
1-1/4"
60 (DT-1250) DT Series Pressure Table (psi)
40 MF MO (SAE
Body Max Rated MS (Male
(Male JIC O-Ring
20 Size Pressure Seal-Lok)
37) Boss)
0
0 10 20 30 40 50 60 70 80 90 1/4 5000 5000 5000 5000
Flow in USGPM 3/8 5000 5000 5000 5000
1/2 5000 4500 5000 5000
5/8 5000 3500 5000 5000
E Valves
3/4 5000 3500 5000 5000

1 5000 3000 5000 5000
Ordering Information 1 1/4 4000 2500 4000 4000
DT Series Installation Assembly Torque (ft-

D T-
*** - **** - ** lbs)
CRACK PRESSURE
01 = 1 PSI Body MF MO (SAE MS (Male
05 = 5 PSI Size (Male JIC 37) O-Ring Boss) Seal-Lok)
65 = 65 PSI
Other Crack Pressures up to 200 PSI in 5 PSI 1/4 13.3 +10% / -0%
increments are available. Contact the Division
for price and delivery on non-standard 3/8 22.1 +10% / -0%
crack pressures
SERIES SIZE FITTING STYLE 1/2 Refer to Parker 62.6 +10% / -0% Refer to Parker
250 - 1/4” MFMF - Male Flare Inlet to Male Flare Outlet TFD Catalog 4300 TFD Catalog 4300
370 - 3/8" MFMO - Male Flare Inlet to Male O-Ring Boss Outlet 5/8 84.8 +10% / -0%
500 - 1/2" MOMF - Male O-Ring Boss Inlet to Male Flare Outlet
for torque for torque
620 - 5/8” MOMS - Male O-Ring Boss Inlet to Male Face Seal Outlet 3/4 recommendation 125.3 +10% / -0% recommendation
750 - 3/4" MSMO - Male Face Seal Inlet to Male O-Ring Boss Outlet
1000 - 1" MSMS - Male Face Seal Inlet to Male Face Seal Outlet 1 199 +10% / -0%
1250 - 1-1/4"
1 1/4 210 +10% / -0%

Minneapolis, MN
Check Valves CV Series
Metal Seal
CV Series Check Valves Offer Low Pressure Drop

and High Flow.
Parker’s CV Series check valves are a rugged built and
versatile product designed to protect hydraulic systems from
fluid back pressure. The CV Series compliments the DT Series
by adding the feature of modular design. The larger body
results in less pressure drop and increased performance. The
CV Series are in-line unidirectional valves, available in sizes
1/4” to 1”, with a pressure rating of up to 3000 PSI, and flow
capacities to 100 GPM. Standard spring crack pressures are
5 and 65 PSI. Other crack pressures available upon request.
Features
1. Nitrile O-ring is standard in the body assembly.
Note port O-rings are included on the MO and MS ports.
2. All-steel construction
3. Valve seats resist damage from shocks, surges and
contamination.
2 3 4 5 1 4. Poppet has an oil retention groove that lubricates the bore
and eliminates galling.
5. Poppet spring is isolated from the liquid flow stream,
minimizing turbulence.
6. Poppet is heat treated to help prevent damage from
shocks, surges and galling.
7. Close tolerance fit between poppet and poppet retainer
creates a cushion that protects valve from surge shock
damage.
8. Optional crack pressures available upon request.
6 7 8
E Valves
CV-MFMF CV-MOMS
Male Flare 37° JIC Inlet to Male Flare 37° JIC Outlet Male O-Ring Boss Inlet to Male Seal-Lok® Outlet
NOTE: Contact QCD for additional port end options.

Minneapolis, MN
Metal Seal
CV-MFMF Male Flare 37° JIC Inlet to Male Flare 37° JIC Outlet
B HEX
TYP
A
Dimensions (in.)
Valve Outlet Port ** Std Crack Max Operating
Part Number Inlet Port Thread Length Wrench Flats
Size Thread Pressure (psi) Pressure (psi)
A B
1/4 CV-250-MFMF-** 7/16-20 UNF 1.53 .68 7/16-20 UNF 5, 65 3000
3/8 CV-370-MFMF-** 9/16-18 UNF 1.75 .81 9/16-18 UNF 5, 65 3000
1/2 CV-500-MFMF-** 3/4-16 UNF 2.22 1.00 3/4-16 UNF 5, 65 3000
5/8 CV-620-MFMF-** 7/8-14 UNF 2.41 1.12 7/8-14 UNF 5, 65 3000
3/4 CV-750-MFMF-** 1-1/16-12 UN 2.75 1.38 1-1/16-12 UN 5, 65 3000
1 CV-1000-MFMF-** 1-5/16-12 UN 3.31 1.62 1-5/16-12 UN 5, 65 3000
CV-MOMS Male O-Ring Boss Inlet to Male Seal-Lok® Outlet
B HEX
TYP
A
Dimensions (in.)
Part Number Inlet Port Thread Length Wrench Flats
Size Thread Pressure (psi) Pressure (psi)
A B
1/4 CV-250-MOMS-** 7/16-20 UNF 1.53 .68 9/16-18 UNF 5, 65 3000
3/8 CV-370-MOMS-** 9/16-18 UNF 1.75 .81 11/16-16 UN 5, 65 3000
E Valves
1/2 CV-500-MOMS-** 3/4-16 UNF 2.22 1.00 13/16-16 UN 5, 65 3000

5/8 CV-620-MOMS-** 7/8-14 UNF 2.41 1.12 1-14 UNS 5, 65 3000
3/4 CV-750-MOMS-** 1-1/16-12 UN 2.75 1.38 1-3/16-12 UN 5, 65 3000
1 CV-1000-MOMS-** 1-5/16-12 UN 3.31 1.62 1-7/16-12 UN 5, 65 3000

Minneapolis, MN
Metal Seal
Flow Data CV Series (1/4" & 3/8") CV Series (1/2", 5/8", 3/4" & 1")
70 100
90
60
3/4"
80
(CV-750)
50
70 1/2" & 5/8"

(CV-500 / CV-620)
40 60
3/8"
(CV-370) 50
30
1/4"
(CV-250) 40
20
30 1"
(CV-1000)
10
20
10
0 2 4 6 8 10 12 14 16
Flow in USGPM
0 10 20 30 40 50 60 70 80 90 100
Flow in USGPM
Ordering Information
CV-
*** - **** - * *
CRACK PRESSURE
05 - 5 PSI
65 - 65 PSI
Other Crack Pressures up to 200 PSI in 5 PSI
increments are available. Contact the Division
for price and delivery on non-standard
crack pressures
SERIES SIZE FITTING STYLE

250 - 1/4” MFMF - Male Flare Inlet to Male Flare Outlet
370 - 3/8" MOMS - Male O-Ring Boss Inlet to Male Seal-Lok ® Outlet
E Valves
500 - 1/2"
620 - 5/8”
750 - 3/4"
1000 - 1"
NOTE: Contact QCD for additional port end options.

Minneapolis, MN
Check Valves DC Series
Metal Seal
DC Series Check Valves are Rugged,

Cost-competitive.
The DC Series offers basic, workhorse check valves –
ruggedly built, readily available and reasonably priced. They
are in-line valves, available in sizes 1/4” to 2”, with a pressure
rating range up to 3000 psi, and flow capacities to 300 GPM.
Features
1. All-steel construction–no internal seals or gaskets to wear
out.
2. One-piece body eliminates threads and seals that may be
potential failure or leakage points.
3. Valve seats resist damage from shocks, surges and
contamination.
4. Poppet has an oil retention groove that lubricates the bore
2 3 4 5 and eliminates galling.
5. Poppet spring is isolated from the liquid flow stream,
minimizing turbulence.
6. Poppet is heat treated to help prevent damage from
shocks, surges and galling.
7. Close tolerance fit between poppet and poppet retainer
creates a cushion that protects valve from surge shock
damage.
8. Check valve body is shaped like an arrow to indicate flow
direction.
9. Available in a variety of standard and non-standard
crack pressures.
1 6 7 8 9
DC Series- Part Numbers

Dimensions (In.)
E Valves
Part Number Inlet Port Thread Wrench

Size Length Thread Pressure (psi) Pressure (psi)
Flats
1/4 DC-250-** 1/4 - 18 NPSF 2.44 0.81 1/4 - 18 NPSF 1, 5, 65 3000
1/4 DC-250-FOFO-** .438 - 20 UNF 2.44 0.81 .438 - 20 UNF 1, 5 3000
3/8 DC-370-** 3/8 - 18 NPSF 2.75 0.88 3/8 - 18 NPSF 1, 5, 65 3000
3/8 DC-370-FOFO-** .562 - 18 UNF 2.75 0.88 .562 - 18 UNF 5 3000
1/2 DC-500-** 1/2 - 14 NPSF 3.5 1.06 1/2 - 14 NPSF 1, 5, 65 3000
1/2 DC-500-FOFO-** .750 - 16 UNF 3.5 1.06 .750 - 16 UNF 5, 65 3000
3/4 DC-750-** 3/4 - 14 NPSF 3.88 1.37 3/4 - 14 NPSF 1, 5, 65 3000
3/4 DC-750-FOFO-** 1.062 - 12 UN 3.88 1.37 1.062 - 12 UN 5, 65 3000
1 DC-1000-** 1 - 11.5 NPSF 4.88 1.62 1 - 11.5 NPSF 5, 65 3000
1 DC-1000-FOFO-** 1.312 - 12 UN 4.88 1.62 1.312 - 12 UN 5, 65 3000
1-1/4 DC-1250-** 1-1/4 - 11.5 NPTF 5.94 2.00 1-1/4 - 11.5 NPTF 5, 65 3000
1-1/4 DC-1250-FOFO-** 1.625 - 12 UN 5.94 2.00 1.625 - 12 UN 5, 65 3000
1-1/2 DC-1500-** 1-1/2 - 11.5 NPTF 6.37 2.38 1-1/2 - 11.5 NPTF 5, 65 3000
1-1/2 DC-1500-FOFO-** 1.875 - 12 UN 6.37 2.38 1.875 - 12 UN 5, 65 3000
2 DC-2000-** 2 - 11.5 NPTF 7.00 3.00 2 - 11.5 NPTF 5, 65 3000
2 DC-2000-FOFO-** 2.500 - 12 UN 7.00 3.00 2.500 - 12 UN 65 3000

Minneapolis, MN
Check Valves DC Series
Metal Seal
Flow Data DC Series (1/4") DC Series (3/8", 1/2" & 3/4")

80 120
70 3/8" 1/2" 3/4"

100 DC-370 DC-500 DC-750
60

80
50 1/4"
DC-250
40 60
30
40
20
20
10
0 0
0 2 4 6 8 10 0 10 20 30 40 50 60
Flow - USGPM Flow in USGPM
DC Series (1", 1-1/4", 1-1/2" & 2")

120
110
100
90 1-1/2"
1-1/4" DC-1500
80 DC-1250
1"
70 DC-1000 2"
DC-2000
60
50
40
30
E Valves
20
10
0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300
Flow in USGPM
Ordering Information
DC-
*** - **** - ** Crack Pressure:
1 = 1 PSI
5 = 5 PSI
65 = 65 PSI
Other crack pressures up to 100 PSI (in 5 PSI increments)
are available. Contact the Division for price and delivery
on non-standard crack pressures.
Fitting Style:
Size Blank = Female pipe inlet to Female pipe outlet
250 = 1/4” FOFO = Female O-ring Boss inlet to Female O-ring Boss outlet
370 = 3/8”
500 = 1/2”
750 = 3/4”
1000 = 1”
1250 = 1-1/4”
1500 = 1-1/2”
2000 = 2”
Series

Minneapolis, MN
Check Valves CPIFF Series
Soft Seat
CPIFF Series Soft Seat Check Valves provide a

positive shut off to prevent reverse flow.
CPIFF Series check valves are designed to protect hydraulic
systems from fluid back pressure. The poppet is streamlined
with minimum restriction of flow in one direction. Flow is
blocked in the reverse direction as the soft seat creates a leak
free seal in the closed position.
These in-line unidirectional valves are available in sizes 1/4” to
1” with a pressure rating up to 5000 psi. Standard spring crack
pressures are shown in the part number table. Other crack
pressures available upon request.
Features
1. Fluorocarbon poppet seal is standard.
Flow Rate (l/min) 2. Steel construction
Hydraulic Oil @ 38°C, Fully Open
3. Optional crack pressures available on request
378.50
113.55
75.70
37.85
18.93
15.14
11.36
3.79
7.57
1.89
1.36
1.51
.38
.76
100 6.90
Specifications
3.45
30
2.76
2.07
Size (in) Max Pressure (psi) Rated Flow
20 1.38 (gpm)
Pressure Drop (bar)
1/4 5000 3
Pressure Drop (psi)
10 .69
"
1/4
3/8 5000 8
"
3/8
5.0 .35
"
1/2
4.0 .28
"
3/4
3.0 .21
1/2 5000 12
1"
2.0 .14
3/4 5000 20
1.0 .07
1 5000 30
.5 .034
.4 .028
.3 .021 Seal Options (add code to part number)
.2 .014
Code Poppet Seal Material
.1 .007
suffix A Nitrile
.1
.5
3.0
5.0
100
.2
.3
.4
1.0
2.0
4.0
10
20
30
Flow Rate (GPM)

Hydraulic Oil @ 100°C, Fully Open suffix E Ethylene Propylene
CPIFF Series Part Numbers

E Valves
Dimensions (In.)
Valve Inlet and Outlet Port Standard Seal ** Std Crack Max Operating
Part Number Wrench
Size Threads (Female) Length Material Pressure (psi) Pressure (psi)
Flats
1/4 CPIFF-2P-** 1/4 - 18 NPSF 1.97 3/4 Fluorocarbon 5, 15, 25, 65 5000
3/8 CPIFF-3P-** 3/8 - 18 NPSF 2.60 1 Fluorocarbon 5, 15, 25, 65 5000
1/2 CPIFF-4P-** 1/2 - 14 NPSF 3.25 1-1/4 Fluorocarbon 5, 15, 25, 65 5000
1/2 CPIFF-8S-** 3/4 - 16 UNF 3.25 1-1/4 Fluorocarbon 5, 15, 25, 65 5000
3/4 CPIFF-6P-** 3/4 - 14 NPSF 4.33 1-3/8 Fluorocarbon 5, 15, 25, 65 5000
3/4 CPIFF-12S-** 1-1/16 - 12 UN 4.33 1-3/8 Fluorocarbon 5, 15, 25, 65 5000
1 CPIFF-8P-** 1 - 11-1/2 NPSF 4.78 1-3/4 Fluorocarbon 5, 15, 25, 65 5000
1 CPIFF-16S-** 1-5/16 - 12 UN 4.78 1-3/4 Fluorocarbon 5, 15, 25, 65 5000

Minneapolis, MN
Check Valves C Series
Soft Seat
S6C and 3C Soft Seat Check Valves span a wide

variety of sizes and end configurations.
S6C and 3C check valves have a variety of options enabling
them to meet the needs of most systems. The soft seated
poppet creates a leak free seal to protect hydraulic systems
from reverse flow.
S6C check valves are stainless steel with a rated pressure of
6000 psi (sizes 1/4”, 3/8”, 1/2”, 3/4” & 1”). 3C check valves
are steel with a rated pressure of 3000 psi (sizes1-1/4”, 1-1/2”
& 2”).
These in-line unidirectional valves are available in sizes 1/4”
to 2”. Standard spring crack pressures are shown in the part
number table. Other crack pressures available upon request.
Features
1. Fluorocarbon poppet seal is standard.
2. Steel or stainless steel construction
3. Optional crack pressures available on request
4. Contact QCD for other materials or configurations
Flow Rate (l/min)
Specifications
Size (in) Rated Flow (gpm)
378.50
113.55
37.85
75.70
18.93
15.14
11.36
3.79
7.57
1.36
1.89
1.51
.38
.76
100 6.90 1/4 3

3.45
2.76
3/8 8
30 2.07
1.38
1/2 12
20
3/4 20
Pressure Drop (bar)
Pressure Drop (psi)
10 .69
1 30
"
1/4
"
5.0 .35
3/8
"
.28
1/2
4.0
1-1/4 90
"
3.0 .21
3/4
1"
2.0 .14
1-1/2 125
1.0 .07
2 175
.5 .034
.4 .028
.3 .021
.2 .014
Seal Options (add code to part number)
E Valves
.1 .007
Code Poppet Seal Material
.1
30
100
.3
.5
1.0
3.0
4.0
10
20
.2
.4
2.0
5.0
Flow Rate (GPM)

Hydraulic Oil @ 100°C, Fully Open suffix A Nitrile
suffix E Ethylene Propylene
Flow Rate (l/min)
1892.50
189.25
378.50
757.00
151.40
113.55
75.70
37.85
500 34.48
400 27.59
300 20.69
Pressure Drop (bar)
Pressure Drop (psi)
/4"
200 13.79
1-1
/2"
100 6.90
1-1
50 3.45
40 2.76
30 2.07
2"
20 1.38
10 .69
10
20
30
40
50
100
200
500
Flow Rate (GPM)


Minneapolis, MN
Check Valves C Series
Soft Seat
S6C Series Part Numbers
Dimensions (In.) ** Std Crack Max Operat-

Valve Standard Seal
Part Number* Inlet Port Threads Wrench Outlet Port Threads Pressure ing Pressure
Size Length Material
Flats (psi) (psi)
1/4 - 18 NPTF
1/4 S6C4F-F* 2.82 3/4 1/4 - 18 NPTF (female) Fluorocarbon 5, 25, 65 6000
(female)
1/4 - 18 NPTF
1/4 S6C4F-M* 2.65 3/4 1/4 - 18 NPT (male) Fluorocarbon 5, 25, 65 6000
(female)
1/4 S6C4M-M* 1/4 - 18 NPT (male) 2.70 3/4 1/4 - 18 NPT (male) Fluorocarbon 5, 25, 65 6000
3/8 - 18 NPTF
3/8 S6C6F-F** 3.38 1-1/8 3/8 - 18 NPTF (female) Fluorocarbon 5, 25, 65 6000
(female)
3/8 - 18 NPTF
3/8 S6C6F-M* 3.18 1-1/8 3/8 - 18 NPT (male) Fluorocarbon 5, 25, 65 6000
(female)
1/2 - 14 NPTF
1/2 S6C8F-F* 3.73 1-1/4 1/2 - 14 NPTF (female) Fluorocarbon 5, 25, 65 6000
(female)
1/2 S6C8M-F* 1/2 - 14 NPT (male) 4.20 1-1/4 1/2 - 14 NPTF (female) Fluorocarbon 5, 25, 65 6000
1/2 S6C8M-M* 1/2 - 14 NPT (male) 4.04 1-1/4 1/2 - 14 NPT (male) Fluorocarbon 5, 25, 65 6000
3/4 - 14 NPTF
3/4 S6C12F-F* 4.91 1-5/8 3/4 - 14 NPTF (female) Fluorocarbon 5, 25, 65 5000
(female)
1 – 11-1/2 NPTF 1 – 11-1/2 NPTF
1 S6C16F-F* 6.06 1-7/8 Fluorocarbon 5, 25, 65 4000
(female) (female)
3C Series Part Numbers

E Valves
Dimensions (In.)
Valve Inlet and Outlet Port Standard Seal ** Std Crack Max Operating
Part Number Wrench
Size Threads (Female) Length Material Pressure (psi) Pressure (psi)
Flats
1-1/4 3C20F-F** 1-1/4 - 11-1/2 NPTF 5.76 2 Fluorocarbon 5, 15, 25, 65 3000
1-1/4 3C20EF-EF** 1-5/8 - 12 UN 5.76 2 Fluorocarbon 5, 15, 25, 65 3000
1-5/8 - 12 UN
1-1/4 3C20EM-EM** 6.57 2 Fluorocarbon 5, 15, 25, 65 3000
(male 37° flare)
1-1/2 3C24F-F** 1-1/2 - 11-1/2 NPTF 6.50 2-1/2 Fluorocarbon 5, 15, 25, 65 3000
1-1/2 3C24EF-EF** 1-7/8 - 12 UN 6.50 2-1/2 Fluorocarbon 5, 15, 25, 65 3000
2 3C32EF-EF** 2-1/2 - 12 UN 7.28 3-1/4 Fluorocarbon 5, 25, 65 3000

Minneapolis, MN
Check Valves 2600 Series
Swing Type
Low Pressure and Lightweight

Constructed of lightweight aluminum, the 2600 Series
Swing Check Valve has a spring-loaded, trapdoor style valve.
The valve opens when system pressure approaches 1/2 psi to
permit full flow with low pressure drop. As system pressure is
relieved, the valve closes, retaining fluids upstream.
Parker’s 2600 Series are in-line check valves designed

especially for diesel and gasoline engine fuel lines. They are
also used for externally mounted oil filters, and coolers, as
well as transmission fluid lubrication lines. With a maximum
of 1/2 psi cracking pressure, these Swing Check Valves are
useful in most low pressure air, liquid, or gas systems.
Features
• Lightweight, corrosion-resistant aluminum construction.
• Available with 1/4” or 3/8” NPTF ports.
• Standard Nitrile or Fluorocarbon seals.
• 1/2 PSI maximum crack pressure.
• Trapdoor style valve permits full flow with low pressure
drop.

Rated Pressure 250 psi max
Crack Pressure 1/2 psi max
Weight 0.08 lbs
Nitrile: -40° to 200°F (-40° C to 93° C)
Temperature Range
Fluorocarbon: -40° to 400°F (-40° C to 204° C)
Max Leakage 5 cc / 24 hours at 28” head
Rated Flow 6 gpm (based on 3/8” hose size)
E Valves
2600 Series Part Numbers
Dimensions
Part
Thread Seal Material Length Wrench
Number
(mm) Flats (in)
2600 1/4 - 18NPTF Nitrile 2.06 (52) 1-1/16
2676 1/4 - 18NPTF Fluorocarbon 2.06 (52) 1-1/16
2650 3/8 - 18NPTF Nitrile 2.12 (54) 1-1/16
2625 3/8 - 18NPTF Fluorocarbon 2.12 (54) 1-1/16

Minneapolis, MN
Pressure/Vacuum Relief Valves H1 and HM1 Series
H1 Series Pressure/Vacuum Relief Valves are used

to maintain positive pressure in hydraulic reservoirs.
The compact size, reusable bronze filter and high flow
characteristics make this valve a popular choice.
The HM1 Series offers the same features and characteristics
as the H1 series with the option of manual over ride. This
feature allows the operator to relieve the reservoir pressure
before opening the tank for refilling, inspection or servicing.
Features
• Easy to remove, cleanable bronze filter.
• High flow characteristics.
• Compact size.
• Available with male pipe or male ORB threads.
• Wide variety of pressure relief settings.
• HM1 series has a manual pressure relief button.
H1 and HM1 Series Specifications

H1 Series HM1 Series
Pressure Rating 60 psi max
Filter Rating 10 micron, nominal
5 psi through 50 psi
Pressure Relief Setting
(in 5 psi increments)
Vacuum Relief Setting 0.3 psi
Weight 1.0 lbs 1.1 lbs
H1 and HM1 Pressure-Vacuum Relief Valve Ordering Information

Flow Data
20
HQ-QQ-QQQQ
E Valves
FITTING STYLE:
15 MP = Male pipe thread

MO = Male O-ring Boss, SAE threads
FITTING SIZE:
6 = 3/8”
10
8 = 1/2”
Pressure 12 = 3/4”
Vacuum *
Relief
16 = 1”
Relief
5 CRACK PRESSURE (PSI):
5 to 50
(in 5 PSI increments)
SERIES:
0
H1
0 10 20 30 40 50
HM1 (with manual pressure relief button)
Flow in SCFM
*Pressure drop is pressure relief valve crack pressure until
pressure drop curve increases above pressure relief crack pressure.

Minneapolis, MN
Pressure/Vacuum Relief Valves PV Series
PV Series is an economical Pressure/Vacuum Relief Valve

used to maintain positive pressure in hydraulic reservoirs.
The large filter area makes this valve an ideal choice for
use in heavily contaminated environments. The optional
bayonet type mount allows the valve to be installed in the
tank filler port, eliminating the need for an extra port.
In this configuration, the valve also serves as a filler cap.
Features
• Disposable spin-on automotive type, field replaceable
filter (240 sq inches).
• Several pressure relief settings.
• Economic design.
• Optional bayonet style allows mounting in filler port with
valve also functioning as filler cap.
PV Series Specifications
PV Series PV Bayonet Style
Filter Rating 10 micron, nominal (240 sq inches)
5 PSI through 30 PSI
Pressure Relief Setting 5 and 10 PSI
(in 5 PSI increments)
Vacuum Relief Setting 0.3 PSI
Weight 1.0 lb.
Bayonet style with
Male ORB, SAE threads tank receptacle
Mounting
Male pipe threads gaskets & screws
(optional strainer basket)
Replacement Filter
7312-009
Part Number
Flow Data PV Pressure-Vacuum Relief Valve Ordering Information

15
PV-QQ-QQQQ-QQ
BAYONET OPTION ONLY:
E Valves
RO = With receptacle, gaskets and screws
RB = With receptacle, gaskets, screws

10 and strainer basket
FITTING / MOUNTING STYLE:
BA = Bayonet mount
MP = Male pipe thread
MO = Male O-ring Boss, SAE threads
Vacuum Pressure
FITTING SIZE:
Relief Relief * Blank = Bayonet style
5
8 = 1/2”
12 = 3/4”
CRACK PRESSURE (PSI):

05 (PV, PV-Bayonet)
10 (PV, PV-Bayonet)
0 15 (PV)
0 10 20 30 40
20 (PV)
Flow in SCFM 25 (PV)
*Pressure drop is pressure relief valve crack pressure until 30 (PV)
pressure drop curve increases above pressure relief crack pressure.
PV SERIES

Minneapolis, MN
Thermal Bypass Valves TH Series
Maintain Optimum Fluid Temperature

Parker’s thermal bypass valve will modulate fluid
temperature by shifting return line flow through the cooler, or
bypassing it directly to the reservoir.
Additionally, an integral pressure relief function automatically
releases excess pressure to the reservoir if the cooler
becomes restricted, and the inlet pressure becomes
excessive. Relief crack pressure settings range from 5 to 85
PSI.
These lightweight, aluminum valves are ideal for hydrostatic
drive circuits requiring fast warm-up, controlled fluid
temperatures, and low return line back pressure.
Features
• Lightweight, corrosion-resistant aluminum housing.
• Available in five shift temperatures.
• Integral relief valve to dump excessive inlet pressures to
the reservoir.
• 250 PSI maximum operating pressure.
• Up to 60 GPM flow rates.
Flow Data Pressure Drop (Mobil DTE 26 oil)

Inlet Port thru Tank Port Inlet Port over Integral Relief Valve
@ 100°F (300 SUS) @ 170°F (78 SUS Oil)
90 130
80 120
110
70 100
60 90
80
50 70
40 60
50
30 40
20 30
20
10
10
0 0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 0 5 10 15 20 25 30 35 40 45 50 55 60 65
E Valves
Inlet Port thru Cooler Port

@ 145°F (110 SUS Oil)
18
16
14
12
10
8
6
4
2
0
0 5 10 15 20 25 30 35 40 45 50 55 60 65
Flow in USGPM

Minneapolis, MN
Thermal Bypass Valves TH Series
TH Series Specifications
Size 1 inch
Weight 2.00 lbs
100° F, 120° F, 140° F,
Std Shift Temperatures
160° F, 180° F
Full Shift Temperature (cooler port open) Shift Temperature plus 25° F
Proof Pressure 300 PSI (21 bar)
Up to full shift temperature: 325 PSI (22 bar)
Minimum Burst Pressure
Above full shift temperature: 600 PSI (41 bar)
Operating Temperature Min: -30° F Max: Shift temperature plus 75° F
Max Flow Rate 60 GPM (227 l/m)
Dimensions
3.51
5.44
[89.2]
[138.2]
2.62
[66.5]
1.312 - 12UN - 2B .42 [10.7] DIA

SAE J1926-1-16 SIZE MOUNTING HOLES
3 PLACES 2 PLACES
Ordering Information TH-1000-16FO-QQ

VALVE SERIES: CRACK PRESSURE/TEMPERATURE CODE:
Thermal Bypass (see table)
VALVE SIZE: PORT SIZE & STYLE:
1000 = 1 inch 16FO = 1 inch SAE O-Ring Boss (1.312 -12UN-2B thread)
E Valves
Crack Pressure/Temperature Code
Shift Crack Pressure PSI
Temperature
5 PSI 10 PSI 15 PSI 20 PSI 25 PSI 30 PSI 35 PSI 40 PSI 45 PSI 50 PSI 55 PSI 60 PSI 65 PSI 70 PSI 75 PSI 80 PSI 85 PSI
100° F (38° C) 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17
120° F (49° C) 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37
140° F (60° C) 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57
160° F (71° C) 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77
180° F (82° C) 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97

Minneapolis, MN
Minneapolis, MN
Appendix
Codes For recommendations for media not listed below, please

contact your Parker representative or the factory.
The following seal compound and body material compatibility
chart is provided as an aid in selecting a specific synthetic Note
rubber compound or body material for a particular application.
Operating and environmental conditions must be considered This chart is intended as a guide only and is not be considered
when making the selection of a quick coupling. as a recommendation to use Parker quick action couplings in
a specific application or with a specific fluid, other factors that
Refer to the appropriate section of the catalog for Ordering must be considered include but are not limited to: fluid and
Information for Seal Codes for specific products. ambient temperature, system pressure, both operating and
To indicate a special material just add the appropriate peak, frequency of connect and disconnect, and applicable
code letter as a suffix to the catalog number of the standards or regulations.
coupler.
It is not necessary to use the code “STD” as the standard
Nitrile seal will be used when another code is not used.
CODES: 1 = Satisfactory 2 = Fair 3 = Not Recommended 4 = Insufficient Data Available
BODY MATERIAL SEAL MATERIAL

MEDIA Brass Steel 316 S.S. 303 S.S. Nitrile E.P. Fluorocarbon Neoprene
3M FC-75 4 4 4 4 1 1 2 1
ACETAMIDE 4 4 1 2 1 1 3 1
ACETIC ACID (5%) 3 3 1 1 2 1 1 1
ACETONE 1 2 1 1 3 1 3 3
ACETOPHENONE 2 2 2 1 3 1 3 3
ACETYL ACETONE 2 2 2 2 3 1 3 3
ACETYL CHLORIDE 4 2 2 2 3 3 1 3
ACETYLENE 3 2 1 1 1 1 1 2
AIR (200 DEGREES F.) 1 2 1 1 1 1 1 1
AIR (300 DEGREES F.) 1 2 1 1 2 2 1 2
AIR (400 DEGREES F.) 1 2 1 1 3 3 1 3
ALUMINUM ACETATE 4 4 4 4 2 1 3 2
ALUMINUM BROMIDE 4 4 4 4 1 1 1 1
ALUMINUM CHLORIDE (10%) 3 3 3 3 1 1 1 1
ALUMINUM CHLORIDE (100%) 3 2 2 2 1 1 1 1
ALUMINUM FLOURIDE 3 3 3 3 1 1 1 1
ALUMINUM NITRATE 3 3 2 2 1 1 1 1
ALUMINUM SALTS 4 4 4 4 1 1 1 1
ALUMINUM SULPHATE 2 3 2 3 1 1 1 1
ALUMS (NH3,Cr,K) 4 4 4 4 1 1 3 1
AMMONIA (ANHYDROUS) 3 2 1 1 2 1 3 1
AMMONIA (COLD, GAS) 3 2 4 1 1 1 3 1
AMMONIA (HOT, GAS) 3 2 4 1 3 2 3 2
AMMONIUM CARBONATE 3 2 3 3 3 1 1 1
AMMONIUM CHLORIDE 3 3 2 3 1 1 1 1
AMMONIUM HYDROXIDE 3 3 1 2 3 1 3 1
AMMONIUM NITRATE 3 3 1 1 1 1 4 1
AMMONIUM PERSULFATE SOLUTION 3 3 1 2 3 1 4 4
AMMONIUM PHOSPHATE
(MONO-, DI-, TRI-BASIC) 3 3 3 2 1 1 4 1
AMMONIUM SALTS 4 4 4 4 1 1 3 1
AMMONIUM SULFATE 3 3 2 3 1 1 3 1
AMYL BORATE 4 4 4 4 1 3 1 1
AMYL CHLORIDE 4 2 1 1 4 3 1 3
AMYL CHLORONAPHTHALENE 4 4 4 4 3 3 1 3
AMYL NAPHTHALENE 4 4 4 4 3 3 1 3
ANIMAL OIL (LARD OIL) 2 2 2 2 1 2 1 2
AROCLOR 1248 2 3 3 3 3 2 1 3
AROCLOR 1254 2 3 3 3 3 2 1 3
Appendices
AROCLOR 1260 2 3 3 3 1 4 1 1
AROMATIC FUEL (50%) 4 4 4 4 2 3 1 3
ARSENIC ACID 3 3 1 1 1 1 1 1
ASPHALT 3 3 1 1 2 3 1 2
ASTM OIL, NO. 1 1 1 1 1 1 3 1 1
ASTM OIL, NO. 2 1 1 1 1 1 3 1 2
I Parker Hannifin Corporation

Minneapolis, MN
Appendix Fluid Compatibility Chart

ASTM OIL, NO. 3 1 1 1 1 1 3 1 3
ASTM OIL, NO. 4 1 1 1 1 2 3 1 3
ASTM REFERENCE FUEL A 3 2 1 1 1 3 1 2
ASTM REFERENCE FUEL B 3 2 1 1 1 3 1 3
ASTM REFERENCE FUEL C 3 2 1 1 2 3 1 3
AUTOMOTIVE BRAKE FLUID 4 4 4 4 3 1 3 2
BARIUM CHLORIDE 3 3 2 3 1 1 1 1
BARIUM HYDROXIDE 3 2 2 3 1 1 1 1
BARIUM SALTS 4 4 4 4 1 1 1 1
BARIUM SULFIDE 3 2 3 3 1 1 1 1
BEER 3 3 1 1 1 1 1 1
BEET SUGAR LIQUORS 3 3 1 1 1 1 1 2
BENZALDEHYDE 3 3 2 3 3 1 3 3
BENZENE 3 2 3 3 3 3 1 3
BENZENESULFONIC ACID (10%) 3 3 3 3 3 3 1 2
BENZINE 4 4 4 4 1 3 1 2
BENZOIC ACID 3 3 3 3 3 3 1 3
BENZYL ALCOHOL 4 3 1 2 3 2 1 2
BENZYL CHLORIDE 3 3 2 3 3 3 1 3
BLEACH LIQUOR 4 4 4 4 3 1 1 2
BORAX 3 2 3 3 2 1 1 3
BORDEAUX MIXTURE 4 4 4 4 2 1 1 2
BORIC ACID 3 3 2 3 1 1 1 1
BRAKE FLUID (NON-PETROLEUM) 4 4 4 4 3 1 3 2
BRINE (SODIUM CHLORIDE) 3 3 1 1 1 1 1 1
BROMINE 4 4 4 4 3 3 1 3
BROMINE WATER 4 4 4 4 3 2 1 3
BUNKER OIL 4 4 4 4 1 3 1 3
BUTADIENE (MONOMER) 3 2 1 2 3 3 1 3
BUTANE 3 1 1 1 1 3 1 1
BUTANE (2,2, & 2,3-DIMETHYL) 4 4 4 4 1 3 1 2
BUTANOL (BUTYL ALCOHOL) 2 1 1 1 1 2 1 1
BUTTER - ANIMAL FAT 2 3 1 2 1 1 1 2
BUTYL BUTYRATE 4 4 4 4 3 1 1 3
BUTYL STEARATE 4 4 4 4 2 3 1 3
CALCINE LIQUORS 4 4 4 4 1 1 1 4
CALCIUM ACETATE 4 4 4 4 2 1 3 2
CALCIUM BISULFITE 3 3 2 3 2 1 2 2
CALCIUM CARBONATE 3 2 3 2 1 1 1 1
CALCIUM CHLORIDE 3 3 2 3 1 1 1 1
CALCIUM HYDROXIDE 3 3 2 3 1 1 1 1
CALCIUM HYPOCHLORITE 3 3 2 3 2 1 1 2
CALCIUM SALTS 4 4 4 4 1 1 1 1
CALCIUM SULFIDE 3 3 2 2 1 1 1 1
CALICHE LIQUORS 4 4 4 4 1 1 1 1
CANE SUGAR LIQUORS 4 2 1 1 1 1 1 1
CARBON BISULPHIDE 4 4 4 4 3 3 1 3
CARBON DIOXIDE 1 2 1 1 1 1 1 1
CARBON DISULFIDE 2 2 2 2 3 3 1 3
CARBON MONOXIDE 1 1 1 1 1 1 1 2
CARBON TETRACHLORIDE 2 3 1 3 2 3 1 3
CARBONIC ACID 3 3 1 2 2 1 1 1
CASTOR OIL 1 1 1 1 1 2 1 1
CELLUGUARD 4 4 4 4 1 1 1 1
CELLULUBE (NOW FYRQUEL) 4 4 4 4 3 1 1 3
CHINA WOOD OIL (TUNG OIL) 2 2 1 1 1 3 1 2
CHLORINATED SALT BRINE 4 4 4 4 3 3 1 3
CHLORINATED SOLVENTS 4 4 4 4 3 3 1 3
CHLOROBENZENE 3 3 2 3 3 3 1 3
Appendices
CHLOROBUTADIENE 4 4 4 4 3 3 1 3
CHLOROFORM 3 2 2 1 3 3 1 3
CHLORPHENOL 4 4 4 4 3 3 1 3
COCONUT OIL 4 4 4 4 1 3 1 3
COPPER CHLORIDE 4 4 4 4 1 1 1 2
COPPER SALTS 4 4 4 4 1 1 1 1
COPPER SULFATE 3 3 2 3 1 1 1 1
II Parker Hannifin Corporation

Minneapolis, MN

CORN OIL 2 1 1 1 1 3 1 3
COTTONSEED OIL 3 2 1 2 1 3 1 3
CREOSOLS 3 2 1 2 3 3 1 3
CREOSOTE 3 3 2 1 1 3 1 2
CRESYLIC ACID 4 2 1 2 3 3 1 3
CRUDE OIL 3 2 1 1 2 3 1 3
CUTTING OIL 4 1 1 1 1 3 1 2
DECANE 4 4 4 4 1 3 1 3
DENATURED ALCOHOL 4 4 4 4 1 1 1 1
DETERGENT, WATER SOLUTION 3 3 1 1 1 1 1 2
DIESEL FUEL 1 1 1 1 1 3 1 3
DIETHYLENE GLYCOL 3 1 1 1 1 1 1 1
DIMETHYL FORMAMIDE 4 4 1 1 2 1 3 3
DOW CHEMICAL HD50-4 4 4 4 4 4 1 3 2
DOW CORNING 200, 510, 550 4 4 4 4 2 1 1 1
DOWTHERM A,E 3 1 2 2 3 3 1 3
ETHANOL 1 3 3 3 3 1 3 1
ETHYL CHLORIDE 2 3 1 3 1 3 1 3
ETHYL HEXANOL 4 4 4 4 1 1 1 1
ETHYLENE DICHLORIDE 3 3 1 2 3 3 1 3
ETHYLENE GLYCOL 2 2 1 2 1 1 1 1
FATTY ACIDS 3 3 1 2 2 3 1 2
FREON 11 1 4 4 4 2 3 2 3
FREON 12 1 1 3 1 2 3 1 1
FREON 22 1 3 1 1 3 3 3 1
FREON 134a 1 1 1 1 2 1 4 1
FUEL OIL 3 1 1 1 1 3 1 2
GALLIC ACID 3 3 2 2 2 2 1 2
GAS, LIQUID, PROPANE (LPG) 1 3 1 1 1 3 1 2
GAS, NATURAL 2 3 1 1 1 3 1 1
GASOLINE 1 2 1 1 3 3 1 3
GELATIN 3 3 1 1 1 1 1 1
GLUCOSE 1 1 1 1 1 1 1 1
GLYCERINE (GLYCEROL) 2 1 1 1 1 1 1 1
GLYCOLS 3 2 2 2 1 1 3 1
GREEN SULFATE LIQUOR 3 3 3 3 2 1 1 2
GULF - FR FLUID (EMULSION) 4 4 4 4 1 3 1 2
GULF - FR FLUID G 4 4 4 4 1 1 1 1
GULF - FR FLUID P 4 4 4 4 3 2 2 3
HELIUM 1 1 1 1 1 1 1 1
HEPTANE 1 1 1 1 1 3 1 2
HYDRAULIC OIL (PETROLEUM BASE) 1 1 1 1 1 3 1 1
HYDRAULIC OIL (WATER BASE) 4 1 1 1 2 1 3 2
HYDRAZINE 4 3 1 1 2 1 3 2
HYDROGEN GAS 2 2 1 1 1 1 1 1
HYDROLUBE 4 4 4 4 1 1 1 2
ISO OCTANE 1 1 1 1 1 3 1 2
ISOBUTYL ALCOHOL 4 4 1 1 2 1 1 1
ISOPROPYL ALCOHOL 1 1 2 1 2 1 1 2
ISOPROPYL ETHER 1 1 1 1 2 3 3 3
JP3 AND JP4 1 1 1 1 1 3 1 3
KEROSENE 1 1 1 1 1 3 1 2
LARD, ANIMAL FAT 1 1 1 1 1 2 1 2
LINSEED OIL 3 1 1 1 1 3 1 3
LUBRICATING OIL SAE 10, 20, 30, 40, 50 1 1 1 1 1 3 1 2
MAGNESIUM SALTS 4 4 4 4 1 1 1 1
MAGNESIUM SULPHATE 3 3 2 2 1 1 1 1
MERCURY 3 3 1 1 1 1 1 1
METHANE 1 3 1 1 1 3 1 2
Appendices
METHANOL 1 1 1 1 1 1 3 1
METHYL BROMIDE 4 1 1 1 2 3 1 3
METHYL CHLORIDE (DRY) 2 3 1 1 3 3 1 3
METHYL CHLORIDE (WET) 1 3 1 3 3 3 1 3
METHYL ETHER 4 4 4 4 1 3 1 3
METHYL ETHYL KETONE (MEK) 1 1 1 1 3 1 3 3
MIL-F-81912 (JP-9) 1 1 1 1 3 3 1 3
III Parker Hannifin Corporation

Minneapolis, MN
B
ODY MATERIAL SEAL MATERIAL
MIL-H-5606 1 1 1 1 1 3 1 2
MIL-H-6083 1 1 1 1 1 3 1 1
MIL-H-7083 1 1 1 1 1 1 2 2
MIL-H-8446 (MLO-8515) 2 1 1 1 2 3 1 1
MIL-L-2104 & 2104B 1 1 1 1 1 3 1 2
MIL-L-7808 3 2 1 1 2 3 1 3
MILK 2 1 1 1 1 1 1 1
MINERAL OILS 1 1 1 1 1 3 1 2
MLO-7277 AND MLO-7557 2 1 1 1 3 3 1 3
MOBILE HF 1 1 1 1 1 3 1 2
MONOMETHYL HYDRAZINE 4 4 4 4 2 1 4 2
NAPHTHA (COAL OR PETROLEUM) 2 1 2 2 2 3 1 3
NAPHTHALENE 2 1 2 2 3 3 1 3
NAPHTHENIC ACID 2 1 2 2 2 3 1 3
NEATSFOOT OIL 4 4 4 4 1 2 1 3
NICKEL, ACETATE 3 2 1 1 2 1 3 2
NICKEL CHLORIDE 3 3 2 2 1 1 1 2
NICKEL SALTS 4 4 4 4 1 1 1 2
NICKEL SULFATE 3 3 1 1 1 1 1 1
NITROGEN 1 1 1 1 1 1 1 1
NITROUS OXIDE 2 2 2 1 1 4 4 4
OCTYL ALCOHOL 1 1 1 1 2 3 1 2
OLIVE OIL 2 1 1 1 1 2 1 2
ORTHO-DICHLOROBENZENE 2 2 2 2 3 3 1 3
OXALIC ACID 3 3 2 1 2 1 1 2
OXYGEN (200-400 DEGREES F.) 1 1 1 1 3 3 2 3
OXYGEN, COLD 1 1 1 1 2 1 1 1
OZONE 3 3 1 1 3 1 1 3
PALMITIC ACID 1 2 1 1 1 2 1 2
PARA-DICHLOROBENZENE 2 1 1 2 3 3 1 3
PARKER O LUBE 1 1 1 1 1 3 1 1
PEANUT OIL 2 1 1 1 1 3 1 3
PENTANE (2-3-METHYL, & 2-4 DIMETHYL) 2 2 2 2 1 3 1 2
PERCHLORIC ACID -2N 3 3 2 2 3 2 1 2
PERCHLOROETHYLENE 3 2 2 2 2 3 1 3
PETROLATUM 1 1 1 1 1 3 1 2
PETROLEUM OIL, BELOW 250 DEGREES F. 1 1 1 1 1 3 1 2
PHENOL 1 1 1 1 3 3 1 3
PHOSPHORIC ACID (3 MOLAR) 3 3 2 2 1 1 1 2
PHOSPHORIC ACID (CONCENTRATED) 3 3 2 2 3 1 1 3
PHOSPHOROUS TRICHLORIDE 3 3 1 1 3 1 1 3
PICRIC ACID, MOLTEN 3 3 2 2 2 2 1 2
PICRIC ACID, WATER SOLUTION 3 3 2 2 1 1 1 1
PINE OIL 2 2 1 2 1 3 1 3
PLATING SOLUTIONS (CHROME) 1 3 1 1 4 1 1 3
PLATING SOLUTIONS (OTHER) 4 1 1 1 1 1 1 3
PNEUMATIC SERVICE 1 1 1 1 1 1 1 1
POTASSIUM ACETATE 2 1 2 2 2 1 3 2
POTASSIUM CHLORIDE 3 3 1 2 1 1 1 1
POTASSIUM CYANIDE 3 2 2 2 1 1 1 1
POTASSIUM DICHROMATE 3 1 2 2 1 1 1 1
POTASSIUM HYDROXIDE (50%) 3 2 1 2 2 1 3 2
POTASSIUM NITRATE 2 1 1 1 1 1 1 1
POTASSIUM SALTS 4 4 4 4 1 1 1 1
POTASSIUM SULFATE 3 2 1 1 1 1 1 1
PRL-HIGH TEMP. HYDR. OIL 4 4 4 4 2 3 1 2
PRODUCER GAS 2 1 1 1 1 3 1 2
PROPANE 1 3 1 1 1 3 1 2
PROPYL ACETATE 3 1 1 1 3 2 3 3
Appendices
PROPYL ALCOHOL 1 1 1 1 1 1 1 1
PROPYLENE 1 1 1 1 3 3 1 3
PYDRAUL 10E 3 1 1 1 3 1 3 3
PYDRAUL A-200, C SERIES 3 1 1 1 3 3 1 3
PYDRAUL, 3 SERIES 3 1 1 1 3 1 1 3
PYROGARD 42, 43, 53, 55
(PHOSPHATE ESTER) 4 4 4 4 3 1 1 3
IV Parker Hannifin Corporation

Minneapolis, MN
B
ODY MATERIAL SEAL MATERIAL
PYROGARD D 4 4 4 4 1 3 3 2
SEA WATER (SALT WATER) 2 3 1 1 1 1 1 2
SHELL IRUS 905 4 4 4 4 1 3 1 2
SILICONE GREASES 1 1 1 1 1 1 1 1
SILVER NITRATE 3 3 1 2 2 1 1 1
SKYDROL 500, TYPE 2 3 1 1 1 3 1 3 3
SKYDROL 7000, TYPE 2 3 1 1 1 3 1 2 3
SOAP SOLUTIONS 3 3 1 1 1 1 1 2
SODIUM ACETATE 1 1 1 1 2 1 3 2
SODIUM BICARBONATE (BAKING SODA) 2 2 1 1 1 1 1 1
SODIUM BISULPHATE OR BISULPHITE 3 3 2 1 1 1 1 1
SODIUM BORATE 3 2 2 2 1 1 1 1
SODIUM CARBONATE (SODA ASH) 4 1 1 1 1 1 1 1
SODIUM CHLORIDE 3 2 2 2 1 1 1 1
SODIUM CYANIDE 3 1 1 1 1 1 4 1
SODIUM HYDROXIDE (CAUSTIC SODA, LYE) 3 2 1 2 2 1 2 2
SODIUM HYDROXIDE, 50% 3 3 1 2 2 1 2 2
SODIUM METAPHOSPHATE 2 1 2 2 1 1 1 2
SODIUM NITRATE 3 2 1 1 2 1 4 2
SODIUM PERBORATE 3 3 1 1 2 1 1 2
SODIUM PEROXIDE 3 1 2 2 2 1 1 2
SODIUM PHOSPHATES 1 3 2 1 1 1 1 2
SODIUM SALTS 4 4 4 4 1 1 1 2
SODIUM SULFATE 3 2 1 1 1 1 1 1
SODIUM SULFIDE AND SULFITE 3 3 2 3 1 1 1 1
SODIUM THIOSULFATE 3 3 1 2 2 1 1 1
SOYBEAN OIL 2 1 1 1 1 3 1 3
STANNOUS CHLORIDE (15%) 3 3 2 3 1 1 1 1
STEAM, BELOW 400 DEGEEES F. 1 3 1 1 3 1* 3 3
STODDARD SOLVENT 2 1 1 1 1 3 1 2
SUCROSE SOLUTIONS 1 1 1 1 1 1 1 2
SULFUR 2 1 1 1 3 1 1 1
SULFUR LIQUORS 1 1 1 1 2 2 1 2
SULFUR (MOLTEN) 3 3 1 1 3 3 1 3
SULFUR DIOXIDE (DRY) 3 1 1 3 3 1 3 3
SULFUR TRIOXIDE (DRY) 2 2 2 3 3 2 1 3
SUNSAFE 3 1 1 1 1 3 1 2
TANNIC ACID (10%) 1 3 2 3 1 1 1 2
TAR, BITUMINOUS 2 1 1 1 2 3 1 3
TARTARIC ACID 2 3 3 2 1 2 1 2
TERPINEOL 4 4 4 4 2 3 1 3
TERTIARY BUTYL ALCOHOL 1 1 1 1 2 2 1 2
TETRACHLOROETHANE 4 2 1 2 3 3 1 3
TETRACHLOROETHYLENE 3 2 2 4 3 3 1 3
TETRAETHYL LEAD 1 1 1 1 2 3 1 2
TETRAETHYL LEAD (BLEND) 1 1 1 1 2 3 1 3
TITANIUM TETRACHLORIDE 2 1 2 3 2 3 1 3
TOLUENE 1 1 1 1 3 3 1 3
TRANSFORMER OIL 1 1 1 1 1 3 1 2
TRANSMISSION FLUID (TYPE A) 1 1 1 1 1 3 1 2
TRICHLOROETHANE 4 2 1 4 3 3 1 3
TRICHLOROETHYLENE 3 2 2 2 3 3 1 3
TRICRESYL PHOSPHATE 4 1 2 2 3 1 2 3
TURBINE OIL #15 (MIL-L-7808A) 4 2 1 1 2 3 1 3
TURPENTINE 3 2 1 1 1 3 1 3
VARNISH 1 1 1 1 2 3 1 3
WATER 1 3 1 1 1 1 2 2
WHISKEY 1 3 1 1 1 1 1 1
WINE 1 3 1 1 1 1 1 1
Appendices
WOOD OIL 4 2 1 1 1 3 1 2
XYLENE 1 2 1 1 3 3 1 3
ZINC SULFATE 3 3 2 2 1 1 1 1
* Contact the division for special EP compound used on 60 Series couplings
V Parker Hannifin Corporation

Minneapolis, MN
PF Series (Plastic/Polypropylene Material)
Ratings Code:
G – Good to excellent. Little or no swelling, tensile or surface changes. Preferred choice.
L – Marginal or conditional. Noticeable effects but not necessarily indicating lack of serviceability. Further testing suggested
for specific application.Very long-term effects such as stiffening or potential for crazing should be evaluated.
P – Poor or unsatisfactory. Not recommended without extensive and realistic testing.
— – Indicates that this was not tested.
# – For Teflon. Indicates good chemical resistance but potential for excessive permeation.
MEDIA Rating MEDIA Rating

Acetaldehyde P Glycerine G
Acetates L Hydriodic Acid –
Acetic Acid G Hydrochloric Acid (Conc.) G
Acetic Anhydride L Hydrochloric Acid (Med. Conc.) G
Acetone G Hydrofluoric Acid G
Acetyl Bromide – Hydrogen Peroxide (Conc.) L
Acetyl Chloride L Hydrogen Peroxide (Dil.) L
Air G Hydrogen Sulfide G
Alcohols L Iodine G
Aluminum Salts G Kerosene P
Ammonia G Ketones G
Amyl Acetate L Lacquer Solvent L
Aniline G Lactic Acid G
Animal Oils G Lead Acetate G
Arsenic Salts L Linseed Oil G
Aromatic Hydrocarbons – Magnesium Salts G
Barium Salts G Naphtha L
Benzaldehyde L Natural Gas L
Benzene (Benzol) L Nickel Salts G
Benzyl Alcohol G Nitric Acid (Conc.) P
Bleaching Liquors – Nitric Acid (Dil.) L
Boric Acid Solution G Nitrobenzene G
Bromine P Nitrogen Oxides –
Butane L Nitrous Acid G
Butanol – Oils (Animal and Mineral) L
Butyl Acetate P Oils (Vegetable) L
Calcium Salts G Oxygen L
Carbon Dioxide G Perchloric Acid L
Carbon Disulfide L Phenol G
Carbon Tetrachloride P Potassium Salts G
Caustic Potash G Pyridine G
Caustic Soda G Silver Nitrate G
Chloracetic Acid L Soap Solutions G
Chlorine (Dry) P Sodium Salts G
Chlorine (Wet) P Stearic Acid L
Chlorobenzene P Sulfur Chloride P
Chloroform P Sulfuric Acid (Conc.) L
Chromic Acid G Sulfuric Acid (Dil.) G
Copper Salts G Sulfurous Acid L
Cresol L Tannic Acid G
Cyclohexanone L Tanning Extracts L
Ethers P Titanium Salts –
Ethyl Acetate L Toluene (Toluol) P
Ethyl Alcohol G Trichloracetic Acid G
Ethylamine L Trichlorethylene P
Ethyl Bromide – Turpentine P
Ethyl Chloride P Urea G
Fatty Acids G Uric Acid –
Ferric Salts G Water G
Formaldehyde G Xylene (Xylol) P
Appendices
Formic Acid G Zinc Chloride G

Freon L
Gasoline L
Glucose G
VI Parker Hannifin Corporation

Minneapolis, MN
Appendix Part Number Index
Part Number Page Part Number Page Part Number Page
0C.....................................A-19 23KAIN13MPN (HF-251-4FP).A-17 3C20EF-EF.........................E-16
0E.....................................A-19 23KAIN17MPN (HF-251-6FP).A-17 3C20EM-EM.......................E-16
0F.....................................A-19 23KATF06MPN (HF-251-4HB).A-17 3C20F-F............................E-16
1C.....................................A-19 23KATF10MPN (HF-251-6HB).A-17 3C24EF-EF.........................E-16
1E.....................................A-19 23KATP06MPN (HF-251-4PL).A-17 3C24F-F............................E-16
1F.....................................A-19 23KATP10MPN (HF-251-6PL).A-17 3C32EF-EF.........................E-16
2C.....................................A-19 24.....................................A-10 4010-2P............................ B-36
2C-E..................................A-19 24-4 LHL6G5TP................. B-110 4010-3P....................B-36, B-39
2E.....................................A-19 24-4 XHX6G5TP................ B-110 4010-6P............................ B-36
2F.....................................A-19 24-5B................................ A-11 4010-T6............................ B-36
3C.....................................A-19 24-5BP.............................. A-11 4050-15............................ B-36
3C-E..................................A-19 24-6B................................ A-11 4050-15P.......................... B-36
3E.....................................A-19 24C...................................A-10 4050-16............................ B-36
3F.....................................A-19 24F...................................A-10 4050-16P.......................... B-36
4-4 OLHL6G5TP................ B-110 25.....................................A-10 4050-29BSPP.................... B-36
4-4 XHX6G5TP.................. B-110 25C...................................A-10 4050-2P............................ B-36
5E.....................................A-19 25F...................................A-10 4050-2P-T8M.................... B-36
5EP.................................. A-20 25KAAN13MPN (RF-251-4MP).A-29 4050-3P............................ B-36
5F.....................................A-19 25KAAN17MPN (RF-251-6MP).A-29 4050-4.............................. B-36
6-4 OLHL6G5TP................ B-110 25KAIN13MPN (RF-251-4FP).A-29 4050-4P............................ B-36
6-4 XHX6G5TP.................. B-110 25KAIN17MPN (RF-251-6FP).A-29 4050-5.............................. B-36
8-4 OLHL6G5TP................ B-110 25KATF06MPN (RF-251-4HB).A-29 4050-5P............................ B-36
8-4 XHX6G5TP ................. B-110 25KATF10MPN (RF-251-6HB).A-29 4050-6P............................ B-36
8C.....................................A-19 25KATP06MPN (RF-251-4PL).A-29 4050P-T6.......................... B-36
8CP.................................. A-20 25KATP10MPN (RF-251-6PL).A-29 4050-T6............................ B-36
9C.....................................A-19 25SFAN13SXZ (RF-254-4MP).A-30 4110-5............................... B-36
9CP.................................. A-20 25SFAN17SXZ (RF-254-6MP).A-30 4118005.............................B-14
10-4 OLHL6G5TP............... B-110 25SFIN13SXZ (RF-254-4FP).A-30 4118006.............................B-14
10-4 XHX6G5TP................ B-110 25SFIN17SXZ (RF-254-6FP).A-30 4118007.............................B-11
12-4 OLHL6G5TP............... B-110 25SFTF06SXZ (RF-254-4HB).A-30 4128002.............................B-11
12-4 XHX6G5TP................ B-110 25SFTF10SXZ (RF-254-6HB).A-30 4138001.............................B-14
14.................................... A-20 25SFTP06SXN (RF-254-4PL).A-30 4148001.............................B-11
14-5B................................A-21 25SFTP10SXN (RF-254-6PL).A-30 4148002.............................B-14
14-5BP..............................A-21 32-4 LHL6G5TP................. B-110 4150-5.............................. B-36
14-6B................................A-21 1141-62............................. B-84 4158001.............................B-11
14C.................................. A-20 1141-63............................. B-84 4250-15............................ B-39
14F................................... A-20 1163-60............................. B-88 4250-15P.......................... B-39
15.................................... A-20 1163-61............................. B-88 4250-3P............................ B-39
15C.................................. A-20 2600..................................E-17 4250-4.............................. B-39
15F................................... A-20 2625..................................E-17 4250-4P............................ B-39
16............................ A-10, A-20 2650..................................E-17 50001-013-0010..................B-11
16-4 OLHL6G5TP............... B-110 2676..................................E-17 50001-015-0010..................B-11
16-4 XHX6G5TP................ B-110 30KAAN13SPN (HF-371-4MP).A-17 50001-112-0010...................B-14
16-5B........................ A-11, A-21 30KAAN17SPN (HF-371-6MP).A-17 50001-113-0260................. B-37
16-5BP...................... A-11, A-21 30KAAN21SPN (HF-371-8MP).A-17 50001-114-0296................. B-82
16-6B........................ A-11, A-21 30KAIN13SPN (HF-371-4FP).A-17 50001-115-0010...................B-14
16-6BP...................... A-11, A-21 30KAIN17SPN (HF-371-6FP).A-17 50001-116-0010...................B-11
16-7B........................ A-11, A-21 30KAIN21SPN (HF-371-8FP).A-17 50001-116-0260......... B-37, B-39
16E.......................... A-10, A-20 30KATF10SPN (HF-371-6HB).A-17 50001-123-0010..................B-14
16G.......................... A-10, A-20 30KATF13SPN (HF-371-8HB).A-17 50001-124-0010..................B-11
17............................ A-10, A-20 30KATP10SPN (HF-371-6PL).A-17 50001-126-0010..................B-14
17E.......................... A-10, A-20 30KATP13SPN (HF-371-8PL).A-17 50001-133-0010..................B-11
17G.......................... A-10, A-20 3005-2.............................. B-82 50001-138-0260..................B-11
21KAAN10MPN (HF-121-2MP).A-16 3005-3.............................. B-82 50001-210-0296................. B-82
21KAAN13MPN (HF-121-4MP).A-16 3009-2.............................. B-82 50001-211-0010...................B-14
21KAIN10MPN (HF-121-2FP).A-16 3009-3.............................. B-82 50001-211-0260..B-37,B-39,B-71,B-73
Appendices
21KAIN13MPN (HF-121-4FP).A-16 3010-2.............................. B-82 50001-213-0010..................B-11

21SFAN10MXN (HF-124-2MP).A-16 3010-3.............................. B-82 50001-215-0010................. B-37
21SFAN13MXN (HF-124-4MP).A-16 3010-3-230........................ B-82 50001-218-0010..................B-11
21SFIN10MXN (HF-124-2FP).A-16 3050-2.............................. B-82 50001-218-0260................. B-37
21SFIN13MXN (HF-124-4FP).A-16 3050-3.............................. B-82 50001-222-0010..................B-11
23KAAN13MPN (HF-251-4MP).A-17 3050-3-231....................... B-82 50001-224-0010..................B-11
23KAAN17MPN (HF-251-6MP).A-17 3613001............................ B-93 50001-234-0260.................B-11
VII Parker Hannifin Corporation

Minneapolis, MN
50001-333-0010..................B-11 6107-16............................. B-67 6610-12-12.........................B-14
50005-211-0200................. B-69 6107-20............................ B-67 6610-16-16.........................B-14
5005-4..... B-37, B-38, B-69, B-73 6107-24............................ B-67 6610-6-6............................B-14
5009-4..... B-37, B-38, B-69, B-73 6108-08............................ B-66 6610-8-10...........................B-14
50-140-4............................B-14 6108-16............................. B-66 6657-12M......................... B-15
5050-4.............................. B-73 6108-20............................ B-66 6657-16M......................... B-15
5205-2M........................... B-37 6108-24............................ B-66 6659-12M......................... B-15
5205-3M................... B-37, B-38 6109-08............................ B-66 6659-16M......................... B-15
5205-4M..B-14, B-37, B-38, B-69, B-73 6109-16............................. B-66 71-1C32-24EF................... B-79
5205-4M-BU..B-37, B-38, B-69, B-73 6109-20............................ B-66 71-1C32-24F..................... B-79
5205-4M-GR..B-37, B-38, B-69, B-73 6109-24............................ B-66 71-1C32-32EF................... B-79
5205-4M-RE...B-37, B-38, B-69, B-73 6110-08............................. B-66 71-1C32-32F..................... B-79
5205-4M-YE.B-37, B-38, B-69, B-73 6110-12............................. B-66 71-3C12-12EF.................... B-79
5205-5M........................... B-37 6110-16............................. B-66 71-3C12-12F...................... B-79
5205-6M........................... B-37 6110-20............................. B-66 71-3C16-16EF.................... B-79
5209-2M........................... B-37 6110-24............................. B-66 71-3C16-16F...................... B-79
5209-3M................... B-37, B-38 6115-08............................. B-67 71-3C16-20EF.................... B-79
5209-4M..B-14, B-37, B-38, B-69, B-73 6115-12............................. B-67 71-3C16-20F...................... B-79
5209-4M-BU..B-37, B-38, B-69, B-73 6115-16............................. B-67 71-3C4-4EF....................... B-79
5209-4M-GR..B-37, B-38, B-69, B-73 6115-20............................. B-67 71-3C4-4F......................... B-79
5209-4M-RE..B-37, B-38, B-69, B-73 6115-24............................. B-67 71-3C6-4F......................... B-79
5209-4M-YE..B-37, B-38, B-69, B-73 6120-08............................ B-66 71-3C6-6EF....................... B-79
5209-5M........................... B-37 6120-12............................. B-66 71-3C6-6F......................... B-79
5209-6M........................... B-37 6120-16............................. B-66 71-3C6-8F......................... B-79
59-1001-16FO.................... B-60 6120-20............................ B-66 71-3C8-8EF....................... B-79
59-1001-16FP.................... B-60 6120-24............................ B-66 71-3C8-8F......................... B-79
59-1002-16FO.................... B-60 6125-08............................ B-67 71-3N12-12EF.................... B-80
59-1002-16FP.................... B-60 6125-12............................. B-67 71-3N12-12F...................... B-80
5910DC-01........................ B-60 6125-16............................. B-67 71-3N16-16EF.................... B-80
5910DP-01........................ B-60 6125-20............................ B-67 71-3N16-16F...................... B-80
59-1501-20FO.................... B-60 6125-24............................ B-67 71-3N16-20EF.................... B-80
59-1501-20FP.................... B-60 6130-08............................ B-66 71-3N16-20F..................... B-80
59-1501-24FO.................... B-60 6130-12............................. B-66 71-3N4-4EF....................... B-80
59-1501-24FP.................... B-60 6130-16............................. B-66 71-3N4-4F......................... B-80
59-1502-20FO................... B-60 6130-20............................ B-66 71-3N6-4F......................... B-80
59-1502-20FP.................... B-60 6130-24............................ B-66 71-3N6-6EF....................... B-80
59-1502-24FO................... B-60 6135-08............................ B-67 71-3N6-6F......................... B-80
59-1502-24FP.................... B-60 6135-12............................. B-67 71-3N6-8F......................... B-80
5915DC-01........................ B-60 6135-16............................. B-67 71-3N8-8EF....................... B-80
5915DP-01........................ B-60 6135-20............................ B-67 71-3N8-8F......................... B-80
59-501-8FO....................... B-60 6135-24............................ B-67 71-3PCC-12....................... B-79
59-501-8FP....................... B-60 6601-12-10.........................B-14 71-3PCC-16....................... B-79
59-502-8FO....................... B-60 6601-12-12.........................B-14 71-3PCC-4........................ B-79
59-502-8FP....................... B-60 6601-16-16.........................B-14 71-3PCC-6........................ B-79
595DC-01.......................... B-60 6601-2-4............................B-14 71-3PCC-8........................ B-79
595DP-01.......................... B-60 6601-4-4............................B-14 71-3PNC-12....................... B-79
59-751-12FO..................... B-60 6601-6-6............................B-14 71-3PNC-16....................... B-79
59-751-12FP...................... B-60 6601-8-10..........................B-14 71-3PNC-4........................ B-79
59-752-12FO..................... B-60 6602-12-10.........................B-14 71-3PNC-6........................ B-79
59-752-12FP..................... B-60 6602-12-12.........................B-14 71-3PNC-8........................ B-79
597DC-01.......................... B-60 6602-16-16.........................B-14 71N32-24EF...................... B-80
597DP-01.......................... B-60 6602-2-4............................B-14 71N32-24F........................ B-80
6100-08............................ B-66 6602-4-4............................B-14 71N32-32F........................ B-80
6100-12............................. B-66 6602-6-6............................B-14 75C12-12F........................ B-76
6100-16............................. B-66 6602-8-10..........................B-14 75C12-12F-DBP................. B-76
6100-20............................ B-66 6608-10-10.........................B-14 75C12-SPK....................... B-75
Appendices
6100-24............................ B-66 6608-12-10.........................B-14 75C16-16F........................ B-76

6105-08............................ B-67 6608-12-12.........................B-14 75C16-16F-DBP................. B-76
6105-12............................. B-67 6608-16-16.........................B-14 75C16-SPK....................... B-75
6105-16............................. B-67 6608-6-6............................B-14 75C20-20F........................ B-76
6105-20............................ B-67 6608-8-10..........................B-14 75C20-20F-DBP................. B-76
6105-24............................ B-67 6610-10-10.........................B-14 75C20-SPK....................... B-75
6107-08............................ B-67 6610-12-10.........................B-14 75C24-24F........................ B-76
VIII Parker Hannifin Corporation

Minneapolis, MN
75C24-24F-DBP................. B-76 A2C.................................. A-24 B20-3BP............................ A-11
75C24-SPK....................... B-75 A3C.................................. A-24 B20-4B.............................. A-11
75C32-32F........................ B-76 A8C.................................. A-24 B20-5B.............................. A-11
75C32-32F-DBP................. B-76 A8CP................................ A-24 B20-5BP............................ A-11
75C32-SPK....................... B-75 ADCE-12........................... B-29 B22...................................A-10
75C40-40F........................ B-76 ADCE-4............................ B-29 B22A.................................A-10
75C40-SPK....................... B-75 ADCE-6............................ B-29 B22E.................................A-10
75C48-48F........................ B-76 ADCE-8............................ B-29 B23...................................A-10
75C64-SPK....................... B-75 ADCH-12........................... B-25 B23A.................................A-10
75MDC-12......................... B-75 ADCH-16........................... B-25 B23E.................................A-10
75MDC-16......................... B-75 ADCH-20.......................... B-25 B24...................................A-10
75MDC-20........................ B-75 ADCH-24.......................... B-25 B25...................................A-10
75MDC-24........................ B-75 ADCH-32.......................... B-25 B2C...................................A-19
75MDC-32........................ B-75 ADCH-4............................ B-25 B30-3B..............................A-14
75MDC-40........................ B-75 ADCH-40.......................... B-25 B30-3BP............................A-14
75MDC-64........................ B-75 ADCH-48.......................... B-25 B30-4B..............................A-14
75MDP-12......................... B-75 ADCH-6............................ B-25 B30-5B..............................A-14
75MDP-16......................... B-75 ADCH-8............................ B-25 B30-5BP............................A-14
75MDP-20........................ B-75 AMPE-12........................... B-29 B32...................................A-13
75MDP-24........................ B-75 AMPE-4............................ B-29 B32A.................................A-13
75MDP-32........................ B-75 AMPE-6............................ B-29 B32E.................................A-13
75MDP-40........................ B-75 AMPE-8............................ B-29 B33...................................A-13
75MDP-64........................ B-75 AMPH-12.......................... B-25 B33A.................................A-13
75N12-12F........................ B-76 AMPH-16.......................... B-25 B33E.................................A-13
75N12-12F-DBP................. B-76 AMPH-20.......................... B-25 B34...................................A-13
75N12-SPK....................... B-75 AMPH-24.......................... B-25 B34-5B..............................A-14
75N16-16F........................ B-76 AMPH-32.......................... B-25 B34-5BP............................A-14
75N16-16F-DBP................. B-76 AMPH-4............................ B-25 B34-6B..............................A-14
75N16-SPK....................... B-75 AMPH-40.......................... B-25 B34C.................................A-13
75N20-20F........................ B-76 AMPH-48.......................... B-25 B34F.................................A-13
75N20-20F-DBP................ B-76 AMPH-6............................ B-25 B35...................................A-13
75N20-SPK....................... B-75 AMPH-8............................ B-25 B35C.................................A-13
75N24-24F........................ B-76 APHC4-4F......................... B-19 B35F.................................A-13
75N24-24F-DBP................ B-76 APHC6-6F......................... B-19 B36...................................A-13
75N24-SPK....................... B-75 APHN4-4F......................... B-22 B36-6B..............................A-14
75N32-32F........................ B-76 APHN4-4M........................ B-24 B36-6BP............................A-14
75N32-32F-DBP................ B-76 APHN6-6F......................... B-22 B36-7B..............................A-14
75N32-SPK....................... B-75 AVHC4-4F......................... B-19 B36E.................................A-13
75N40-40F........................ B-76 AVHC4-4M........................ B-20 B36G.................................A-13
75N40-SPK....................... B-75 AVHC6-6F......................... B-19 B37...................................A-13
75N48-48F........................ B-76 AVHC6-6M........................ B-20 B37E.................................A-13
75N64-SPK....................... B-75 AVHC8-8F......................... B-19 B37G.................................A-13
7820123............................ B-93 AVHN4-4F......................... B-22 B38...................................A-13
8010-15.B-36, B-39, B-69, B-71, B-73 AVHN4-4M........................ B-24 B38-7B..............................A-14
8010-15P.. B-36, B-39, B-69, B-71 AVHN6-6F......................... B-22 B38-8B..............................A-14
8010-15P-DC..................... B-39 AVHN6-6M........................ B-24 B38J.................................A-13
8010-16.... B-36, B-69, B-71, B-73 AVHN8-8F......................... B-22 B39...................................A-13
8010-16P...........B-36, B-69, B-71 B10-3B..............................A-21 B39F.................................A-13
8010-29BSPP.................... B-36 B10-3BP............................A-21 B39J.................................A-13
8010-4..B-36, B-39, B-69, B-71, B-73 B10-4B..............................A-21 B3C...................................A-19
8010-4P....B-36, B-39, B-69, B-71 B10-5B..............................A-21 B50-3BP........................... A-24
8010-4P-DC....................... B-39 B10-5BP............................A-21 B50-5BP........................... A-24
8010-5.............................. B-36 B12.................................. A-20 B52.................................. A-24
8010-5P............................ B-36 B12A................................ A-20 B52E................................ A-24
8250-15............................ B-69 B12E................................ A-20 B53.................................. A-24
8250-16............................ B-69 B13.................................. A-20 B53E................................ A-24
Appendices
8250-4.............................. B-69 B13A................................ A-20 B72.................................. A-27

9250-15-320.......................B-71 B13E................................ A-20 B73.................................. A-26
9250-16-320.......................B-71 B14.................................. A-20 BH12-60L............................ B-8
9250-334...........................B-71 B15.................................. A-20 BH12-60N........................... B-8
9250-4-320........................B-71 B16.......................... A-10, A-20 BH12-61L.......................... B-10
9250-6-320........................B-71 B17.......................... A-10, A-20 BH12-61N......................... B-10
9507-4-1............................B-71 B20-3B.............................. A-11 BH1-60............................... B-8
IX Parker Hannifin Corporation

Minneapolis, MN
BH1-61............................. B-10 BPHC20-20F..................... B-19 BVEAN12-12F.................... B-29
BH2016-60.......................... B-8 BPHC4-4F......................... B-19 BVEAN12-12M................... B-29
BH2016-61........................ B-10 BPHC6-6F......................... B-19 BVEAN6-6F....................... B-29
BH2020-60.......................... B-8 BPHC8-8F......................... B-19 BVEAN6-6M...................... B-29
BH2020-61........................ B-10 BPHN12-12F...................... B-22 BVEAN8-8F....................... B-29
BH2024-60.......................... B-8 BPHN12-12M..................... B-24 BVEAN8-8M...................... B-29
BH2024-61........................ B-10 BPHN16-16F...................... B-22 BVGF-1C12-12F................. A-42
BH2-60............................... B-8 BPHN16-16M..................... B-24 BVGF-1C8-8F.................... A-42
BH2-60-STM......................B-12 BPHN20-20F..................... B-22 BVGFC16-16F.................... A-42
BH2-61............................. B-10 BPHN24-24F..................... B-22 BVGFC20-20F.................... A-42
BH2-61-STM.......................B-12 BPHN32-32F..................... B-22 BVGFC4-4F....................... A-42
BH2C................................. A-7 BPHN4-2F......................... B-22 BVGFC6-6F....................... A-42
BH2E.................................. A-7 BPHN4-2M........................ B-24 BVHC12-12F...................... B-19
BH2F.................................. A-7 BPHN4-4F......................... B-22 BVHC12-12M..................... B-20
BH2G................................. A-7 BPHN4-4M........................ B-24 BVHC16-16M..................... B-20
BH3-60............................... B-7 BPHN6-6F......................... B-22 BVHC20-20F..................... B-19
BH3-61............................. B-10 BPHN6-6M........................ B-24 BVHC4-4F......................... B-19
BH3C................................. A-6 BPHN8-8F......................... B-22 BVHC4-4M........................ B-20
BH3E.................................. A-6 BPHN8-8M........................ B-24 BVHC6-6F......................... B-19
BH3F.................................. A-6 BPN251F........................... B-94 BVHC6-6M........................ B-20
BH4-60............................... B-8 BPN252F.......................... B-94 BVHC8-8F......................... B-19
BH4-60-STM......................B-12 BPN253F.......................... B-94 BVHC8-8M........................ B-20
BH4-61............................. B-10 BPN352F.......................... B-94 BVHN12-12F...................... B-22
BH4-61-STM.......................B-12 BPN353F.......................... B-94 BVHN12-12M..................... B-24
BH5G................................. A-7 BPV252............................ B-94 BVHN16-16F...................... B-22
BH6-60............................... B-8 BPV353............................ B-94 BVHN16-16M..................... B-24
BH6-60-STM......................B-12 BST-1............................... B-86 BVHN20-20F..................... B-22
BH6-61............................. B-10 BST-10............................. B-86 BVHN24-24F..................... B-22
BH6-61-STM.......................B-12 BST-12............................. B-86 BVHN32-32F..................... B-22
BH67E-60K........................B-11 BST-1M............................ B-86 BVHN4-4F......................... B-22
BH67E-61K.........................B-11 BST-2............................... B-86 BVHN4-4M........................ B-24
BH67F-60K........................B-11 BST-2M............................ B-86 BVHN6-6F......................... B-22
BH67F-61K.........................B-11 BST-3............................... B-86 BVHN6-6M........................ B-24
BH67G-60K........................B-11 BST-3M............................ B-86 BVHN8-8F......................... B-22
BH67G-61K........................B-11 BST-4............................... B-86 BVHN8-8M........................ B-24
BH67J-60K.........................B-11 BST-4M............................ B-86 C-25................................. B-32
BH67J-61K.........................B-11 BST-6............................... B-86 C-50................................. B-32
BH8-60............................... B-8 BST-6M............................ B-86 C-75................................. B-32
BH8-60-STM......................B-12 BST-8............................... B-86 CFE-1002-PN.................... B-52
BH8-61............................. B-10 BST-8M............................ B-86 CFE-252-PN...................... B-52
BH8-61-STM.......................B-12 BST-N1............................. B-87 CFE-372-PN...................... B-52
BH8CP............................... A-8 BST-N10........................... B-87 CFE-502-PN...................... B-52
BPD3167..........................B-102 BST-N10M........................ B-87 CFE-622-PN...................... B-52
BPD323Y......................... B-101 BST-N12........................... B-87 CFE-752-PN...................... B-52
BPD343Y......................... B-101 BST-N12M........................ B-87 CPIFF-12S..........................E-14
BPDFS341........................B-109 BST-N1M.......................... B-87 CPIFF-16S..........................E-14
BPDFS343.......................B-109 BST-N2............................. B-87 CPIFF-2P...........................E-14
BPEAC12-12F.................... B-28 BST-N2M.......................... B-87 CPIFF-3P...........................E-14
BPEAC4-4F....................... B-28 BST-N3............................. B-87 CPIFF-4P...........................E-14
BPEAC6-6F....................... B-28 BST-N3M.......................... B-87 CPIFF-6P...........................E-14
BPEAC8-8F....................... B-28 BST-N4............................. B-87 CPIFF-8P...........................E-14
BPEAN12-12F.................... B-29 BST-N4M.......................... B-87 CPIFF-8S...........................E-14
BPEAN4-4F....................... B-29 BST-N6............................. B-87 CR-25................................B-31
BPEAN6-6F....................... B-29 BST-N6M.......................... B-87 CV-1000-MFMF..................E-10
BPEAN8-8F....................... B-29 BST-N8............................. B-87 CV-1000-MOMS..................E-10
BPGF-1N12-12F................. A-42 BST-N8M.......................... B-87 CV-250-MFMF....................E-10
Appendices
BPGF-1N8-8F.................... A-42 BVEAC12-12F.................... B-28 CV-250-MOMS...................E-10

BPGFN16-16F.................... A-42 BVEAC12-12M................... B-28 CV-370-MFMF....................E-10
BPGFN20-20F................... A-42 BVEAC4-4F....................... B-28 CV-370-MOMS...................E-10
BPGFN4-4F....................... A-42 BVEAC6-6F....................... B-28 CV-500-MFMF....................E-10
BPGFN6-6F....................... A-42 BVEAC6-6M...................... B-28 CV-500-MOMS...................E-10
BPHC12-12F...................... B-19 BVEAC8-8F....................... B-28 CV-620-MFMF....................E-10
BPHC16-16F...................... B-19 BVEAC8-8M...................... B-28 CV-620-MOMS...................E-10
X Parker Hannifin Corporation

Minneapolis, MN
CV-750-MFMF....................E-10 DT-750-MOMS.................... E-6 FEM-372-8FO.................... B-52
CV-750-MOMS...................E-10 DT-750-MSMO.................... E-7 FEM-501-10BMF-NL........... B-51
DC-1000............................E-12 DT-750-MSMS..................... E-7 FEM-501-10BMS-NL........... B-51
DC-1000-FOFO...................E-12 EA12-58A.......................... B-27 FEM-501-10FO-NL.............. B-51
DC-1250............................E-12 EA4-58AS......................... B-27 FEM-501-12FO-NL.............. B-51
DC-1250-FOFO...................E-12 EA8-58V........................... B-27 FEM-501-8FO-NL............... B-51
DC-1500............................E-12 EMA3/1/4ED.................... B-107 FEM-501-8FP-NL............... B-51
DC-1500-FOFO...................E-12 EMA3/1/4NPT..................B-106 FEM-502-10BMF................ B-52
DC-2000............................E-12 EMA3/1/4NPT71...............B-106 FEM-502-10BMS............... B-52
DC-2000-FOFO...................E-12 EMA3/1/8ED.................... B-107 FEM-502-10FO.................. B-52
DC-250..............................E-12 EMA3/1/8NPT..................B-106 FEM-502-12FO.................. B-52
DC-250-FOFO.....................E-12 EMA3/10X1ED.................. B-107 FEM-502-8FO.................... B-52
DC-370..............................E-12 EMA3/12X1.5ED............... B-107 FEM-502-8FP.................... B-52
DC-370-FOFO.....................E-12 EMA3/14X1.5ED................ B-107 FEM-621-12FO-NL............. B-51
DC-50...............................B-31 EMA3/3/8ED.................... B-107 FEM-622-12FO.................. B-52
DC-500..............................E-12 EMA3/7/16-20UNF-2A...... B-106 FEM-751-12FO-NL............. B-51
DC-500-FOFO.....................E-12 EMA3/9/16-18UNF-2A.......B-106 FEM-751-12FP-NL.............. B-51
DC-750..............................E-12 EMA3/M8X1OR................. B-107 FEM-752-12FO.................. B-52
DC-750-FOFO.....................E-12 EMA3VS........................... B-107 FEM-752-12FP................... B-52
DM-121-2FP...................... B-97 EZ-251-4FP........................A-41 FET-1001-20FO.................. B-62
DM-121-2MP..................... B-97 EZ-251-4HB.......................A-41 FET-1001-20FP.................. B-62
DM-121-4FP...................... B-97 EZ-251-4MP.......................A-41 FET-1001-20SF.................. B-63
DM-121-4MP..................... B-97 EZ-251-4PL........................A-41 FET-1001-20SFP................ B-63
DM-122-2FP...................... B-97 EZ-251-6FP........................A-41 FET-1002-20FO.................. B-63
DM-122-2MP..................... B-97 EZ-251-6HB.......................A-41 FET-1002-20FP.................. B-63
DM-122-4FP...................... B-97 EZ-251-6MP.......................A-41 FET-1002-20SF.................. B-64
DM-122-4MP..................... B-97 EZ-251-6PL........................A-41 FET-1002-20SFP................ B-64
DP-50................................B-31 EZ-371-6FP........................A-41 FET10DC-01...................... B-64
DT-1000-MFMF.................... E-5 EZ-371-6HB........................A-41 FET10DP-01...................... B-64
DT-1000-MFMO................... E-5 EZ-371-6MP.......................A-41 FET-1501-24FO.................. B-62
DT-1000-MOMF................... E-6 EZ-371-6PL........................A-41 FET-1501-24FP.................. B-62
DT-1000-MOMS................... E-6 EZ-371-8FP........................A-41 FET-1501-24SF.................. B-63
DT-1000-MSMO................... E-7 EZ-501-12FP.......................A-41 FET-1501-24SFP................ B-63
DT-1000-MSMS................... E-7 EZ-501-8FP........................A-41 FET-1502-24FO.................. B-63
DT-1250-MFMF.................... E-5 EZ-501-8HB.......................A-41 FET-1502-24FP.................. B-63
DT-1250-MFMO................... E-5 EZ-501-8MP.......................A-41 FET-1502-24SF.................. B-64
DT-1250-MOMF................... E-6 EZ-501-8PL........................A-41 FET-1502-24SFP................ B-64
DT-1250-MOMS................... E-6 EZ-751-12FP.......................A-41 FET15DC-01...................... B-64
DT-1250-MSMO................... E-7 EZ-751-12MP......................A-41 FET15DP-01...................... B-64
DT-1250-MSMS................... E-7 EZ-751-16FP.......................A-41 FET-2001-32FO.................. B-62
DT-250-MOMF..................... E-6 FC-372-6FP....................... B-49 FET-2001-32FP.................. B-62
DT-250-MOMS.................... E-6 FC-372-8FO...................... B-49 FET-2002-32FO................. B-63
DT-370-MFMF..................... E-5 FC-372-8FP....................... B-49 FET-2002-32FP.................. B-63
DT-370-MFMO..................... E-5 FC-502-10FO..................... B-49 FET20DC-01...................... B-64
DT-370-MOMF..................... E-6 FC-502-8FP....................... B-49 FET20DP-01...................... B-64
DT-370-MOMS.................... E-6 FC-752-12FO..................... B-49 FET-371-8FO..................... B-62
DT-370-MSMO.................... E-7 FC-752-12FP..................... B-49 FET-371-8FP..................... B-62
DT-370-MSMS..................... E-7 FEC-502-10FO................... B-53 FET-372-8FO..................... B-63
DT-500-MFMF..................... E-5 FEC-502-12FO................... B-53 FET-372-8FP..................... B-63
DT-500-MFMO..................... E-5 FEC-502-8FP..................... B-53 FET3DC-01........................ B-64
DT-500-MOMF..................... E-6 FEC-622-12FO................... B-53 FET3DP-01........................ B-64
DT-500-MOMS.................... E-6 FEC-752-12FO................... B-53 FET-501-10FO.................... B-62
DT-500-MSMO.................... E-7 FEM-1001-16FO-NL............ B-51 FET-501-8FP..................... B-62
DT-500-MSMS..................... E-7 FEM-1001-16FP-NL............ B-51 FET-502-10FO................... B-63
DT-620-MFMF..................... E-5 FEM-1002-16FO................. B-52 FET-502-8FP..................... B-63
DT-620-MFMO..................... E-5 FEM-1002-16FP................. B-52 FET5DC-01........................ B-64
Appendices
DT-620-MOMF..................... E-6 FEM-251-4FP-NL............... B-51 FET5DP-01........................ B-64

DT-620-MOMS.................... E-6 FEM-251-6FO-NL............... B-51 FET-621-12FO................... B-62
DT-620-MSMO.................... E-7 FEM-252-4FP.................... B-52 FET-621-12FP.................... B-62
DT-620-MSMS..................... E-7 FEM-252-6FO.................... B-52 FET-622-12FO................... B-63
DT-750-MFMF..................... E-5 FEM-371-6FP-NL............... B-51 FET-622-12FP.................... B-63
DT-750-MFMO..................... E-5 FEM-371-8FO-NL............... B-51 FET6DC-01........................ B-64
DT-750-MOMF..................... E-6 FEM-372-6FP.................... B-52 FET6DP-01........................ B-64
XI Parker Hannifin Corporation

Minneapolis, MN
FET-751-16FO.................... B-62 FF-752-12FO..................... B-47 H1-05-16MP.......................E-18

FET-751-16FP.................... B-62 FF-752-12FP..................... B-47 H1-05-6MP........................E-18
FET-751-16SF.................... B-63 FF-752-KIT........................ B-48 H1-20-12MP.......................E-18
FET-751-16SFP.................. B-63 FF-752-KIT-E4................... B-48 H12-56-9.......................... B-18
FET-752-16FO................... B-63 FF-752-KIT-E5................... B-48 H12-62L.............................. B-8
FET-752-16FP.................... B-63 FH-371-6FB....................... B-55 H12-62N............................. B-8
FET-752-16SF.................... B-64 FH-371-6FP....................... B-55 H12-62-T20......................... B-8
FET-752-16SFP.................. B-64 FH-371-6MP...................... B-55 H12-62-T24......................... B-8
FET7DC-01........................ B-64 FH-372-6FB....................... B-55 H12-63L............................ B-10
FET7DP-01........................ B-64 FH-372-6FP....................... B-55 H12-63N........................... B-10
FF/FS-1001-TOOL.............. B-48 FR-1001.................... B-48, B-57 H12-63-T20....................... B-10
FF/FS-1001-TOOL.............. B-58 FR-1002.................... B-48, B-57 H12-63-T24....................... B-10
FF/FS-251-TOOL................ B-48 FR-25....................... B-48, B-57 H12-65..............................B-11
FF/FS-371-TOOL................ B-58 FR-501...................... B-48, B-57 H12-66..............................B-11
FF/FS-751-TOOL................ B-48 FR-502..................... B-48, B-57 H1-62................................. B-8
FF/FS-751-TOOL................ B-58 FR-751...................... B-48, B-57 H1-62-T4............................ B-8
FF-1001-16FO.................... B-47 FR-752..................... B-48, B-57 H1-63............................... B-10
FF-1001-16FP.................... B-47 FS-1001-16FO.................... B-57 H1-63-T4.......................... B-10
FF-1001-KIT...................... B-48 FS-1001-16FP.................... B-57 H1-65................................B-11
FF-1001-KIT-E4.................. B-48 FS-1001-KIT...................... B-58 H16-56-9.......................... B-18
FF-1001-KIT-E5.................. B-48 FS-1001-KIT-E5................. B-58 H1-65M.....................B-11, B-15
FF-1002-16FO.................... B-47 FS-1002-16FO................... B-57 H1-66................................B-11
FF-1002-16FP.................... B-47 FS-1002-16FP.................... B-57 H1-66M.....................B-11, B-15
FF-1002-KIT...................... B-48 FS-1002-KIT...................... B-58 H1C................................... A-6
FF-1002-KIT-E4................. B-48 FS-1002-KIT-E5................. B-58 H1E.................................... A-6
FF-1002-KIT-E5................. B-48 FS-251-4FP....................... B-57 H1F.................................... A-6
FF-251-4FP....................... B-47 FS-251-4MP...................... B-57 H2016-62............................ B-8
FF-251-4MP...................... B-47 FS-251-6FO....................... B-57 H2016-63.......................... B-10
FF-251-6FO....................... B-47 FS-252-4FP....................... B-57 H2020-62............................ B-8
FF-251-KIT........................ B-48 FS-252-4MP...................... B-57 H2020-63.......................... B-10
FF-251-KIT-E4................... B-48 FS-252-6FO...................... B-57 H2024-62............................ B-8
FF-251-KIT-E5................... B-48 FS-252-KIT....................... B-58 H2024-63.......................... B-10
FF-252-4FP....................... B-47 FS-252-KIT-E5................... B-58 H20-55............................. B-18
FF-252-4MP...................... B-47 FS-371-6FP....................... B-57 H20-56-9.......................... B-18
FF-252-6FO....................... B-47 FS-371-8FO....................... B-57 H20P-65............................B-11
FF-252-KIT........................ B-48 FS-371-E5......................... B-58 H20P-66............................B-11
FF-252-KIT-E4................... B-48 FS-371-KIT........................ B-58 H24-55............................. B-18
FF-252-KIT-E5................... B-48 FS-372-6FP....................... B-57 H2-62................................. B-8
FF-371-6FB....................... B-47 FS-372-8FO....................... B-57 H2-62-T6............................ B-8
FF-371-6FP....................... B-47 FS-372-KIT........................ B-58 H2-63............................... B-10
FF-371-8FB....................... B-47 FS-372-KIT-E5................... B-58 H2-63-T6.................. B-10, B-71
FF-371-8FO....................... B-47 FS-501-10FO..................... B-57 H2-65................................B-11
FF-371-8FP....................... B-47 FS-501-8FP....................... B-57 H2-65M.............................B-11
FF-371-KIT........................ B-47 FS-501-KIT........................ B-58 H2-66................................B-11
FF-371-KIT-E4................... B-47 FS-501-KIT-E5................... B-58 H2-66M.............................B-11
FF-371-KIT-E5................... B-47 FS-501-TOOL..................... B-58 H2C................................... A-7
FF-372-6FB....................... B-47 FS-502-10FO..................... B-57 H2C-E................................ A-7
FF-372-6FP....................... B-47 FS-502-8FP....................... B-57 H2E.................................... A-7
FF-372-8FB....................... B-47 FS-502-KIT....................... B-58 H2E-F................................. A-7
FF-372-8FO....................... B-47 FS-502-KIT-E5................... B-58 H2F.................................... A-7
FF-372-8FP....................... B-47 FS-751-12FO..................... B-57 H2F-G.........................A-7, A-19
FF-372-KIT........................ B-48 FS-751-12FP..................... B-57 H2G................................... A-7
FF-372-KIT-E4................... B-48 FS-751-KIT........................ B-58 H2G-F................................ A-7
FF-372-KIT-E5................... B-48 FS-751-KIT-E5................... B-58 H2G-J................................. A-7
FF-501-10FO..................... B-47 FS-752-12FO..................... B-57 H32-55............................. B-18
FF-501-8FP....................... B-47 FS-752-12FP..................... B-57 H3-62................................. B-8
Appendices
FF-502-10FO..................... B-47 FS-752-KIT....................... B-58 H3-62-T8............................ B-8

FF-502-8FP....................... B-47 FS-752-KIT-E5................... B-58 H3-63............................... B-10
FF-751-12FO..................... B-47 H00E.................................. A-7 H3-63-T8.......................... B-10
FF-751-12FP...................... B-47 H0C................................... A-7 H3-65................................B-11
FF-751-KIT........................ B-48 H0E.................................... A-7 H3-65M.............................B-11
FF-751-KIT-E4................... B-48 H0F.................................... A-7 H3-66................................B-11
FF-751-KIT-E5................... B-48 H1-05-12MP.......................E-18 H3-66M.............................B-11
XII Parker Hannifin Corporation

Minneapolis, MN
H3-68................................B-12 H8-66M.............................B-11 NS-371-6FB.......................B-41

H3-69................................B-12 H8C................................... A-7 NS-371-6FP........................B-41
H3C................................... A-6 H8C-D................................ A-7 NS-371-8FO.......................B-41
H3C-E................................ A-6 H8CP.................................. A-8 NS-372-6FB.......................B-41
H3E.................................... A-6 H9C................................... A-7 NS-372-6FP.......................B-41
H3E-F................................. A-6 H9CP.................................. A-8 NS-372-8FO.......................B-41
H3F.................................... A-6 HM1-05-12MP....................E-18 NS-501-10FO......................B-41
H3F-G........................ A-6, A-19 HM1-10-12MP....................E-18 NS-501-8FB.......................B-41
H3G................................... A-6 HM1-10-6MP......................E-18 NS-501-8FP.......................B-41
H3G-F................................ A-6 HM1-15-12MP....................E-18 NS-502-10FO.....................B-41
H3G-J................................. A-6 HO-251-4FP...................... B-89 NS-502-8FB.......................B-41
H4-56-9............................ B-18 HO-252-4FP...................... B-89 NS-502-8FP.......................B-41
H4-62................................. B-8 HO-371-6FP...................... B-89 NS-751-12FB......................B-41
H4-62-T10........................... B-8 HO-372-6FP...................... B-89 NS-751-12FO......................B-41
H4-63............................... B-10 HO-501-8FP...................... B-89 NS-751-12FP......................B-41
H4-63-T10......................... B-10 HO-502-8FP...................... B-89 NS-752-12FB......................B-41
H4-65................................B-11 HP-1001-16FO................... B-34 NS-752-12FO.....................B-41
H4-65M.............................B-11 HP-1001-16FP.................... B-34 NS-752-12FP......................B-41
H4-66................................B-11 HP-1002-16FO................... B-34 NSS-371-6BMA.................. B-43
H4-66M.............................B-11 HP-1002-16FP................... B-34 NSS-371-6FO.................... B-43
H4EP.................................. A-8 HP-1501-24FO................... B-34 NSS-371-6HB.................... B-43
H4F.............................A-7, A-19 HP-1501-24FP................... B-34 NSS-371-6HMA.................. B-44
H4FP.......................... A-8, A-20 HP-1502-24FO................... B-34 NSS-371-6MA.................... B-43
H5E.................................... A-7 HP-1502-24FP................... B-34 NSS-371-8FO.................... B-43
H5EP.................................. A-8 HPC-100........................... B-34 NSS-371-8HB.................... B-43
H5F.................................... A-7 HPC-150........................... B-34 NSS-371-8MA.................... B-43
H5F-G.........................A-7, A-19 HPP-100........................... B-34 NSS-372-6BMA................. B-45
H5FP.......................... A-8, A-20 HPP-150........................... B-34 NSS-372-6FO.................... B-44
H5G................................... A-7 KEY-BK............................B-111 NSS-372-6HB.................... B-44
H5G-F................................ A-7 KEY-BU............................B-111 NSS-372-6HMA................. B-45
H5G-J................................. A-7 KEY-CL.............................B-111 NSS-372-6MA................... B-45
H6-56-9............................ B-18 KEY-GR............................B-111 NSS-372-8FO.................... B-44
H6-62................................. B-8 KEY-NI.............................B-111 NSS-372-8HB.................... B-44
H6-62-T12........................... B-8 KEY-RD............................B-111 NSS-372-8MA................... B-45
H6-63............................... B-10 L2C.................................. A-27 NSS-501-10FO................... B-43
H6-63-T12......................... B-10 L3C.................................. A-27 NSS-501-12BMA................ B-43
H6-65................................B-11 MAV1/4NPTMA3CF........... B-107 NSS-501-12FO................... B-43
H6-65M.............................B-11 MAV1/4NPTMA3KMCF....... B-107 NSS-501-12HB.................. B-43
H6-66................................B-11 MAVMD1/4NPTMA3CF...... B-107 NSS-501-12HMA................ B-44
H6-66M.............................B-11 MCE-12............................ B-29 NSS-501-12MA.................. B-43
H67A-28............................B-11 MCE-4.............................. B-29 NSS-501-8BMA................. B-43
H67C-28............................B-11 MCE-6.............................. B-29 NSS-501-8HB.................... B-43
H67E-62K..........................B-11 MCE-8.............................. B-29 NSS-501-8HMA................. B-44
H67E-63K..........................B-11 MCH-12............................ B-25 NSS-501-8MA.................... B-43
H67F-62K..........................B-11 MCH-16............................ B-25 NSS-502-10FO.................. B-44
H67F-63K..........................B-11 MCH-20............................ B-25 NSS-502-12BMA................ B-45
H67G-62K..........................B-11 MCH-24............................ B-25 NSS-502-12FO.................. B-44
H67G-63K..........................B-11 MCH-32............................ B-25 NSS-502-12HB.................. B-44
H67J-62K...........................B-11 MCH-4.............................. B-25 NSS-502-12HMA................ B-45
H67J-63K...........................B-11 MCH-40............................ B-25 NSS-502-12MA.................. B-45
H68E-67K..........................B-12 MCH-48............................ B-25 NSS-502-8BMA................. B-45
H69E-67K..........................B-12 MCH-6.............................. B-25 NSS-502-8HB.................... B-44
H6E.................................... A-7 MCH-8.............................. B-25 NSS-502-8HMA................. B-45
H6EP.................................. A-8 NR-100............................. B-40 NSS-502-8MA................... B-45
H6FP.................................. A-8 NR-37...... B-40, B-48, B-55, B-57 P200-9A........................... B-93
H8-56-9............................ B-18 NR-50..... B-40, B-48, B-55, B-57 P200-9AY.......................... B-93
Appendices
H8-62................................. B-8 NR-75.............................. B-40 P201-01A.......................... B-92

H8-62-T16........................... B-8 NS-1001-16FB....................B-41 P208-01A.......................... B-92
H8-63............................... B-10 NS-1001-16FO....................B-41 P-25................................. B-32
H8-63-T16......................... B-10 NS-1001-16FP....................B-41 P300-11S.......................... B-93
H8-65................................B-11 NS-1002-16FB....................B-41 P300-6............................. B-93
H8-65M.............................B-11 NS-1002-16FO....................B-41 P300-9A........................... B-93
H8-66................................B-11 NS-1002-16FP....................B-41 P300-9AY.......................... B-93
XIII Parker Hannifin Corporation

Minneapolis, MN
P301-01A.......................... B-92 PC308V-BP....................... B-91 PD38BTL..........................B-103

P308-01A.......................... B-92 PC316............................... B-92 PD38BTX.........................B-103
P308-01A-HF..................... B-92 PC316-BP*........................ B-92 PD397.............................B-102
P-50................................. B-32 PC316V............................. B-92 PDC-12.....................B-25, B-29
P500-9A........................... B-93 PC316V-BP........................ B-92 PDC-16............................. B-25
P500-9AY.......................... B-93 PC318............................... B-92 PDC-4......................B-25, B-29
P-75................................. B-32 PC318-BP......................... B-92 PDC-6......................B-25, B-29
PBH-251-4FP.....................A-37 PC318V............................. B-92 PDC-8......................B-25, B-29
PBH-251-4MP....................A-37 PC318V-BP........................ B-92 PDFS242.........................B-109
PBH-251-6FP.....................A-37 PC326.............................. B-91 PDFS-PROBE...................B-109
PBH-251-6MP....................A-37 PC326-BP......................... B-91 PDH-19............................B-108
PBH-371-4FP......................A-37 PC326V............................ B-91 PDH-32............................B-108
PBH-371-4MP.....................A-37 PC326V-BP....................... B-91 PDH-120..........................B-108
PBH-371-6FP......................A-37 PC328.............................. B-91 PDH-240..........................B-108
PBH-371-6MP.....................A-37 PC328-BP......................... B-91 PDP-12.....................B-25, B-29
PBH-371-8FP......................A-37 PC328V............................ B-91 PDP-16............................. B-25
PBS-251-4FP..................... A-39 PC328V-BP....................... B-91 PDP242...........................B-105
PBS-251-4MP.................... A-39 PC500.............................. B-92 PDP288...........................B-108
PBS-251-6FP..................... A-39 PC504.............................. B-91 PDP323...........................B-105
PBS-251-6MP.................... A-39 PC504-BP......................... B-91 PDP341............................B-105
PBS-371-6FP..................... A-39 PC506.............................. B-91 PDP343...........................B-105
PBS-371-6MP.................... A-39 PC506-BP......................... B-91 PDP34BTL........................B-105
PBS-371-8FP..................... A-39 PC514............................... B-92 PDP34BTX.......................B-105
PBS-371-8MP.................... A-39 PC514-BP.......................... B-92 PDP361............................B-105
PBS-501-12FP................... A-39 PC516............................... B-92 PDP36BTL........................B-105
PBS-501-6FP..................... A-39 PC516-BP......................... B-92 PDP36BTX.......................B-105
PBS-501-8FP..................... A-39 PC524.............................. B-91 PDP-4......................B-25, B-29
PBS-501-8MP.................... A-39 PC524-BP......................... B-91 PDP-6......................B-25, B-29
PC204.............................. B-91 PC526.............................. B-91 PDP-8......................B-25, B-29
PC204AV........................... B-91 PC526-BP......................... B-91 PEAC4-4F......................... B-28
PC204AV-BP..................... B-91 PD222............................. B-101 PEAC4-4M........................ B-28
PC204-BP......................... B-91 PD240............................. B-101 PEAC6-6F......................... B-28
PC205.............................. B-91 PD242............................. B-101 PEAC8-8F......................... B-28
PC205AV........................... B-91 PD243............................. B-101 PEAN4-4F......................... B-29
PC206.............................. B-91 PD248............................. B-101 PEAN4-4M........................ B-29
PC206AV........................... B-91 PD260............................. B-101 PEAN6-6F......................... B-29
PC206AV-BP..................... B-91 PD288............................. B-101 PEAN8-8F......................... B-29
PC206-BP......................... B-91 PD3107............................B-102 PER-251-4FP..................... A-40
PC214............................... B-92 PD310BTL........................B-103 PER-251-4MP.................... A-40
PC214AV........................... B-92 PD3127............................B-102 PER-251-6FP..................... A-40
PC214AV-BP...................... B-92 PD312BTX........................B-103 PER-251-6MP.................... A-40
PC214-BP......................... B-92 PD3147............................B-102 PES-251-4MP.................... A-42
PC215............................... B-92 PD322............................. B-101 PES-251-6FP..................... A-42
PC215AV........................... B-92 PD323............................. B-101 PFE-1001-PN..................... B-52
PC216............................... B-92 PD331.............................B-102 PFE-251-PN...................... B-52
PC216AV........................... B-92 PD341.............................B-102 PFE-371-PN....................... B-52
PC216AV-BP...................... B-92 PD342............................. B-101 PFE-501-PN...................... B-52
PC216-BP......................... B-92 PD343............................. B-101 PFE-621-PN...................... B-52
PC224.............................. B-91 PD345.............................B-102 PFE-751-PN...................... B-52
PC224AV........................... B-91 PD346.............................B-102 PHC12-12F........................ B-19
PC224AV-BP..................... B-91 PD34BTL..........................B-103 PHC16-16F........................ B-19
PC224-BP......................... B-91 PD34BTX.........................B-103 PHC20-20F....................... B-19
PC226.............................. B-91 PD351.............................B-102 PHC24-24F....................... B-19
PC226AV........................... B-91 PD355.............................B-102 PHC32-32F....................... B-19
PC226AV-BP..................... B-91 PD357.............................B-102 PHC4-4F........................... B-19
PC226-BP......................... B-91 PD361.............................B-102 PHC6-6F........................... B-19
Appendices
PC306.............................. B-91 PD363............................. B-101 PHC8-8F........................... B-19

PC306-BP......................... B-91 PD365.............................B-102 PHN12-12F................ A-38, B-22
PC306V............................ B-91 PD366.............................B-102 PHN12-12M............... A-38, B-24
PC306V-BP....................... B-91 PD367C...........................B-102 PHN16-16F........................ B-22
PC308.............................. B-91 PD36BTL..........................B-103 PHN16-16M....................... B-24
PC308-BP......................... B-91 PD36BTX.........................B-103 PHN20-20F....................... B-22
PC308V............................ B-91 PD386.............................B-102 PHN24-24F....................... B-22
XIV Parker Hannifin Corporation

Minneapolis, MN
PHN32-32F....................... B-22 PS1210306-12-12................. D-6 PS690507-6-6................... D-12
PHN32-32M...................... B-24 PS1210502-12-12................. D-7 PS690510-6-6.................... D-12
PHN4-2F........................... B-22 PS1210506-12-12................. D-7 PS6A-RPR........................... D-4
PHN4-2M.......................... B-24 PS121JMJM-12-12............... D-7 PS6-RPR............................. D-4
PHN4-4F................... A-35, B-22 PS1290102-12-12................. D-8 PS6W-RPR.......................... D-4
PHN4-4M.................. A-35, B-24 PS1290103-12-12................. D-9 PS6Y-RPR........................... D-4
PHN6-6F................... A-35, B-22 PS1290107-12-12................. D-9 PS810102-8-8...................... D-5
PHN6-6M.................. A-35, B-24 PS1290110-12-12.................. D-9 PS810106-8-8...................... D-6
PHN8-8F................... A-35, B-22 PS12901JM-12-12.............. D-10 PS810302-8-8...................... D-6
PHN8-8M.................. A-35, B-24 PS1290302-12-12............... D-10 PS810306-8-8...................... D-6
PL-25............................... B-32 PS1290303-12-12............... D-10 PS810502-8-8...................... D-7
PN250.............................. B-94 PS1290307-12-12................D-11 PS810506-8-8...................... D-7
PN250-25......................... B-95 PS1290310-12-12................D-11 PS81JMJM-8-8.................... D-7
PN250-40......................... B-95 PS1290502-12-12................D-11 PS890102-8-8...................... D-8
PN250-55......................... B-95 PS1290503-12-12............... D-12 PS890103-8-8...................... D-9
PN251.............................. B-94 PS1290507-12-12............... D-12 PS890107-8-8...................... D-9
PN251-25.......................... B-95 PS1290510-12-12............... D-12 PS890110-8-8...................... D-9
PN251-40.......................... B-95 PS12A-RPR......................... D-4 PS8901JM-8-8................... D-10
PN251-55.......................... B-95 PS12-RPR........................... D-4 PS890302-8-8................... D-10
PN251-70.......................... B-95 PS12W-RPR........................ D-4 PS890303-10-10................ D-10
PN251-85.......................... B-95 PS12Y-RPR......................... D-4 PS890303-8-8................... D-10
PN251F............................. B-94 PS1610102-16-16.................. D-5 PS890307-8-8....................D-11
PN251S............................ B-94 PS1610106-16-16.................. D-6 PS890310-8-8.....................D-11
PN252.............................. B-94 PS1610302-16-16................. D-6 PS890502-8-8....................D-11
PN252-25......................... B-95 PS1610306-16-16................. D-6 PS890503-10-10................ D-12
PN252-40......................... B-95 PS1610502-16-16................. D-7 PS890503-8-8................... D-12
PN252-55......................... B-95 PS1610506-16-16................. D-7 PS890507-8-8................... D-12
PN252-70......................... B-95 PS161JMJM-16-16............... D-7 PS890510-8-8.................... D-12
PN252-85......................... B-95 PS1690102-16-16................. D-8 PS8A-RPR........................... D-4
PN252F............................ B-94 PS1690103-16-16................. D-9 PS8-RPR............................. D-4
PN252S............................ B-94 PS1690107-16-16................. D-9 PS8W-RPR.......................... D-4
PN253.............................. B-94 PS1690110-16-16.................. D-9 PS8Y-RPR........................... D-4
PN253F............................ B-94 PS16901JM-16-16.............. D-10 PV-05-12MP.......................E-19
PN253S............................ B-94 PS1690302-16-16............... D-10 PV-05-8MP........................E-19
PN351-25.......................... B-95 PS1690303-16-16............... D-10 PV-10-12MP.......................E-19
PN351-40.......................... B-95 PS1690307-16-16................D-11 PV-20-12MP.......................E-19
PN351-55.......................... B-95 PS1690310-16-16................D-11 RK-12N............................. D-34
PN351-70.......................... B-95 PS1690502-16-16................D-11 RK-4/6N........................... D-34
PN351-85.......................... B-95 PS1690503-16-16............... D-12 RK-8N.............................. D-34
PN352.............................. B-94 PS1690507-16-16............... D-12 S2102-12-12...................... D-15
PN352-25......................... B-95 PS1690510-16-16............... D-12 S2102-4-4......................... D-15
PN352-40......................... B-95 PS16A-RPR......................... D-4 S2102-6-6......................... D-15
PN352-55......................... B-95 PS16-RPR........................... D-4 S2102-8-8......................... D-15
PN352-70......................... B-95 PS16W-RPR........................ D-4 S2107-12-12...................... D-15
PN352-85......................... B-95 PS16Y-RPR......................... D-4 S2107-4-4......................... D-15
PN352F............................ B-94 PS610102-6-6...................... D-5 S2107-6-6......................... D-15
PN352S............................ B-94 PS610106-6-6...................... D-6 S2107-8-8......................... D-15
PN353.............................. B-94 PS610302-6-6...................... D-6 S22...................................A-10
PN353-25......................... B-95 PS610306-6-6...................... D-6 S2202-12-12...................... D-15
PN353-40......................... B-95 PS610502-6-6...................... D-7 S2202-4-4......................... D-15
PN353-55......................... B-95 PS610506-6-6...................... D-7 S2202-6-6......................... D-15
PN353-70......................... B-95 PS61JMJM-6-6.................... D-7 S2202-8-8......................... D-15
PN353-85......................... B-95 PS690102-6-6...................... D-8 S2207-12-12...................... D-16
PN353F............................ B-94 PS690103-6-6...................... D-9 S2207-4-4......................... D-16
PN353S............................ B-94 PS690107-6-6...................... D-9 S2207-6-6......................... D-16
PN354.............................. B-94 PS690110-6-6...................... D-9 S2207-8-8......................... D-16
Appendices
PN553.............................. B-94 PS6901JM-6-6................... D-10 S23...................................A-10

PN554.............................. B-94 PS690302-6-6................... D-10 S2502-12-12...................... D-16
PN556.............................. B-94 PS690303-6-6................... D-10 S2502-6-6......................... D-16
PR-25............................... B-32 PS690307-6-6....................D-11 S2502-8-8......................... D-16
PS1210102-12-12.................. D-5 PS690310-6-6.....................D-11 S2507-12-12...................... D-16
PS1210106-12-12.................. D-6 PS690502-6-6....................D-11 S2507-6-6......................... D-16
PS1210302-12-12................. D-6 PS690503-6-6................... D-12 S2507-8-8......................... D-16
XV Parker Hannifin Corporation

Minneapolis, MN
S2-ACV-03-BHB.................. C-4 S71-3N16-20F................... B-80 SH67E-63K........................B-11
S2-ACV-03-HB..................... C-4 S71-3N4-4EF..................... B-80 SH67F-62K........................B-11
S2-ACV-04-FP..................... C-4 S71-3N4-4F....................... B-80 SH67F-63K........................B-11
S2-ACV-04-HB..................... C-4 S71-3N6-6EF..................... B-80 SH67G-62K........................B-11
S2-ACV-04-MP.................... C-4 S71-3N6-6F....................... B-80 SH67G-63K........................B-11
S2-ANS-03-BHB.................. C-5 S71-3N8-8EF..................... B-80 SH67J-62K.........................B-11
S2-ANS-03-HB.................... C-5 S71-3N8-8F....................... B-80 SH67J-63K.........................B-11
S2-ANS-04-BHB.................. C-5 S75C12-12F...................... B-76 SH71-3C12-12F.................. B-79
S2-ANS-04-FP..................... C-5 S75C16-16F...................... B-76 SH71-3C16-16F.................. B-79
S2-ANS-04-HB.................... C-5 S75C20-20F...................... B-76 SH71-3C4-4F..................... B-79
S2-ANS-04-MP.................... C-5 S75C24-24F...................... B-76 SH71-3C6-6EF................... B-79
S2-ANV-03-BHB.................. C-6 S75C32-32F...................... B-76 SH71-3C6-6F..................... B-79
S2-ANV-03-HB.................... C-6 S75C40-40F...................... B-76 SH71-3C8-8F..................... B-79
S2-ANV-04-FP..................... C-6 S75C48-48F...................... B-76 SH71-3N12-12F.................. B-80
S2-ANV-04-HB.................... C-6 S75N12-12F...................... B-76 SH71-3N16-16F.................. B-80
S2-ANV-04-MP.................... C-6 S75N16-16F...................... B-76 SH71-3N4-4F..................... B-80
S2-APV-04-FP..................... C-4 S75N20-20F...................... B-76 SH71-3N6-6EF................... B-80
S2-APV-04-HB..................... C-5 S75N24-24F...................... B-76 SH71-3N6-6F..................... B-80
S2C...................................A-19 S75N32-32F...................... B-76 SH71-3N8-8EF................... B-80
S6-ACV-04-FP..................... C-4 S75N40-40F...................... B-76 SH71-3N8-8F..................... B-80
S6-ACV-04-HB..................... C-4 S75N48-48F...................... B-76 SH8-62............................... B-9
S6-ACV-04-MP.................... C-4 SCA-1/2-EMA-3................ B-107 SH8-62-T16......................... B-9
S6-ACV-06-FP..................... C-4 SCA-1/4-EMA-3CF............ B-107 SH8-63..............................B-11
S6-ACV-06-HB..................... C-4 SCA-7/16-EMA-3............. B-107 SH8-63-T16........................B-11
S6-ACV-06-MP.................... C-4 SH12-62L............................ B-8 SH8C................................. A-7
S6-ANS-04-HB.................... C-5 SH12-62N........................... B-8 SH9C................................. A-7
S6-ANS-06-FP..................... C-5 SH12-62-T20....................... B-8 SM-251-4FB.......................B-31
S6-ANS-06-HB.................... C-5 SH12-62-T24....................... B-8 SM-251-4FP.......................B-31
S6-ANS-06-MP.................... C-5 SH12-63L.......................... B-10 SM-251-6FB.......................B-31
S6-ANV-04-FP..................... C-6 SH12-63N......................... B-10 SM-251-6FO.......................B-31
S6-ANV-04-HB.................... C-6 SH12-63-T20..................... B-10 SM-251-6FP.......................B-31
S6-ANV-04-MP.................... C-6 SH12-63-T24..................... B-10 SM-252-4FB.......................B-31
S6-ANV-06-FP..................... C-6 SH1-62............................... B-8 SM-252-4FP.......................B-31
S6-ANV-06-HB.................... C-6 SH1-62-T4.......................... B-8 SM-252-6FB.......................B-31
S6-ANV-06-MP.................... C-6 SH1-63............................. B-10 SM-252-6FO......................B-31
S6C12F-F...........................E-16 SH1-63-T4........................ B-10 SM-252-6FP.......................B-31
S6C16F-F...........................E-16 SH2016-62.......................... B-8 SM-501-12FB.....................B-31
S6C4F-F............................E-16 SH2016-63........................ B-10 SM-501-12FP.....................B-31
S6C4F-M...........................E-16 SH2020-62.......................... B-8 SM-501-8FB.......................B-31
S6C4M-M..........................E-16 SH2020-63........................ B-10 SM-501-8FO.......................B-31
S6C6F-F............................E-16 SH2024-62.......................... B-8 SM-501-8FP.......................B-31
S6C6F-M...........................E-16 SH2024-63........................ B-10 SM-502-12FB.....................B-31
S6C8F-F............................E-16 SH2-62............................... B-8 SM-502-12FP.....................B-31
S6C8M-F...........................E-16 SH2-62-T6.......................... B-8 SM-502-8FB.......................B-31
S6C8M-M..........................E-16 SH2-63............................. B-10 SM-502-8FO......................B-31
S71-3C12-12EF.................. B-79 SH2-63-T6........................ B-10 SM-502-8FP.......................B-31
S71-3C12-12F.................... B-79 SH2C................................. A-7 SM-751-12FB.....................B-31
S71-3C16-16EF.................. B-79 SH2C-E.............................. A-7 SM-751-12FO.....................B-31
S71-3C16-16F.................... B-79 SH3-62............................... B-8 SM-751-12FP.....................B-31
S71-3C16-20EF.................. B-79 SH3-62-T8.......................... B-8 SM-751-16FB.....................B-31
S71-3C16-20F.................... B-79 SH3-63............................. B-10 SM-751-16FO.....................B-31
S71-3C4-4EF..................... B-79 SH3-63-T8........................ B-10 SM-751-16FP.....................B-31
S71-3C4-4F....................... B-79 SH3C................................. A-5 SM-752-12FB.....................B-31
S71-3C6-6EF..................... B-79 SH3C-E.............................. A-5 SM-752-12FO.....................B-31
S71-3C6-6F....................... B-79 SH4-62............................... B-8 SM-752-12FP.....................B-31
S71-3C6-8F....................... B-79 SH4-62-T10......................... B-8 SM-752-16FB.....................B-31
Appendices
S71-3C8-8EF..................... B-79 SH4-63............................. B-10 SM-752-16FO.....................B-31

S71-3C8-8F....................... B-79 SH4-63-T10....................... B-10 SM-752-16FP.....................B-31
S71-3N12-12EF.................. B-80 SH6-62............................... B-8 SMA3-1000......................B-108
S71-3N12-12F.................... B-80 SH6-62-T12......................... B-8 SMA3-200........................B-108
S71-3N16-16EF.................. B-80 SH6-63............................. B-10 SMA3-2000......................B-108
S71-3N16-16F.................... B-80 SH6-63-T12....................... B-10 SMA3-400........................B-108
S71-3N16-20EF.................. B-80 SH67E-62K........................B-11 SMA3-4000......................B-108
XVI Parker Hannifin Corporation

Minneapolis, MN
SMA3-800........................B-108 SSH67E-63KY.....................B-11 SVHC20-20F...................... B-20

SPEAC12-12F.................... B-28 SSH67F-62KY.....................B-11 SVHC24-24F...................... B-20
SPEAC4-4F....................... B-28 SSH67F-63KY.....................B-11 SVHC32-32F...................... B-20
SPEAC4-4M...................... B-28 SSH67G-62KY....................B-11 SVHC4-2F......................... B-20
SPEAN12-12F.................... B-29 SSH67G-63KY....................B-11 SVHC4-4F......................... B-20
SPEAN4-4F....................... B-29 SSH67J-62KY.....................B-11 SVHC4-4M........................ B-21
SPEAN4-4M...................... B-29 SSH67J-63KY.....................B-11 SVHC6-6F......................... B-20
SPHC12-12F...................... B-20 SSH8-62Y........................... B-9 SVHC6-6M........................ B-21
SPHC16-16F...................... B-20 SSH8-62Y-T16..................... B-9 SVHC8-8F......................... B-20
SPHC20-20F..................... B-20 SSH8-63Y........................... B-9 SVHC8-8M........................ B-21
SPHC24-24F..................... B-20 SSH8-63Y-T16..................... B-9 SVHN12-12F...................... B-23
SPHC32-32F..................... B-20 SSPD242Y....................... B-101 SVHN12-12M..................... B-24
SPHC4-4F......................... B-20 SSPD343Y....................... B-101 SVHN16-16F...................... B-23
SPHC6-6F......................... B-20 SST-1............................... B-86 SVHN16-16M..................... B-24
SPHC8-8F......................... B-20 SST-1M............................ B-86 SVHN20-20F..................... B-23
SPHN12-12F...................... B-23 SST-2............................... B-86 SVHN20-20M.................... B-24
SPHN16-16F...................... B-23 SST-2M............................ B-86 SVHN24-24F..................... B-23
SPHN20-20F..................... B-23 SST-3............................... B-86 SVHN32-32F..................... B-23
SPHN24-24F..................... B-23 SST-3M............................ B-86 SVHN4-2F......................... B-23
SPHN32-32F..................... B-23 SST-4............................... B-86 SVHN4-4F......................... B-23
SPHN4-2F......................... B-23 SST-4M............................ B-86 SVHN4-4M........................ B-24
SPHN4-2M........................ B-24 SST-6............................... B-86 SVHN6-6F......................... B-23
SPHN4-4M........................ B-24 SST-8............................... B-86 SVHN8-8F......................... B-23
SPHN6-6M........................ B-24 SST-N1............................. B-87 TC-371.............................. B-83
SPHN8-8F......................... B-23 SST-N1M.......................... B-87 TC-372............................. B-83
SPHN8-8M........................ B-24 SST-N2............................. B-87 TH-1000-16FO-05................E-21
SSH12-62LY........................ B-9 SST-N2M.......................... B-87 TH-1000-16FO-10................E-21
SSH12-62NY....................... B-9 SST-N3............................. B-87 TH-1000-16FO-13................E-21
SSH12-62Y-T20................... B-9 SST-N3M.......................... B-87 TH-1000-16FO-25................E-21
SSH12-62Y-T24................... B-9 SST-N4............................. B-87 TH-1000-16FO-30................E-21
SSH12-63LY........................ B-9 SST-N4M.......................... B-87 TH-1000-16FO-33................E-21
SSH12-63NY....................... B-9 SST-N6............................. B-87 TH-1000-16FO-45................E-21
SSH12-63Y-T20................... B-9 SST-N6M.......................... B-87 TH-1000-16FO-50................E-21
SSH12-63Y-T24................... B-9 SST-N8............................. B-87 TH-1000-16FO-53................E-21
SSH1-62Y........................... B-9 SST-N8M.......................... B-87 TH-1000-16FO-65................E-21
SSH1-62Y-T4...................... B-9 ST-N1............................... B-87 TH-1000-16FO-70................E-21
SSH1-63Y........................... B-9 ST-N1M............................ B-87 TH-1000-16FO-85................E-21
SSH1-63Y-T4...................... B-9 ST-N2............................... B-87 TL-251-4FP....................... A-32
SSH2016-62Y...................... B-9 ST-N2M............................ B-87 TL-251-4MP...................... A-32
SSH2016-63Y...................... B-9 ST-N3............................... B-87 TL-251-6MP...................... A-32
SSH2020-62Y...................... B-9 ST-N3M............................ B-87 TL-254-2FP....................... A-33
SSH2020-63Y...................... B-9 ST-N4............................... B-87 TL-254-2MP...................... A-33
SSH2024-62Y...................... B-9 ST-N4M............................ B-87 TL-254-4FP....................... A-33
SSH2024-63Y...................... B-9 ST-N6............................... B-87 TL-254-4HB....................... A-33
SSH2-62Y........................... B-9 ST-N6M............................ B-87 TL-254-4MP...................... A-33
SSH2-62Y-T6...................... B-9 ST-N8............................... B-87 TL-254-6HB....................... A-33
SSH2-63Y........................... B-9 ST-N8M............................ B-87 TL-501-12FP...................... A-32
SSH2-63Y-T6...................... B-9 SVEAC12-12F.................... B-28 TL-501-6FP....................... A-32
SSH3-62Y........................... B-9 SVEAC4-4F....................... B-28 TL-501-6MP...................... A-32
SSH3-62Y-T8...................... B-9 SVEAC8-8F....................... B-28 TL-501-8FP....................... A-32
SSH3-63Y........................... B-9 SVEAC8-8M...................... B-28 TL-501-8MP...................... A-32
SSH3-63Y-T8...................... B-9 SVEAN12-12F.................... B-29 TL-504-12MP..................... A-33
SSH4-62Y........................... B-9 SVEAN4-2F....................... B-29 TL-504-4FP....................... A-33
SSH4-62Y-T10..................... B-9 SVEAN4-4F....................... B-29 TL-504-4HB....................... A-33
Appendices
SSH4-63Y........................... B-9 SVEAN4-4M...................... B-29 TL-504-4MP...................... A-33

SSH4-63Y-T10..................... B-9 SVEAN8-8F....................... B-29 TL-504-6FP....................... A-33
SSH6-62Y........................... B-9 SVEAN8-8M...................... B-29 TL-504-6HB....................... A-33
SSH6-62Y-T12..................... B-9 SVHC12-12F...................... B-20 TL-504-6MP...................... A-33
SSH6-63Y........................... B-9 SVHC12-12M..................... B-21 TL-504-8HB....................... A-33
SSH6-63Y-T12..................... B-9 SVHC16-16F...................... B-20 TL-504-8MP...................... A-33
SSH67E-62KY.....................B-11 SVHC16-16M..................... B-21 TR-37....................... B-14, B-83
XVII Parker Hannifin Corporation

Minneapolis, MN
UC-251-4FP...................... A-25 VHN6-6F........................... B-22
UC-251-4MP..................... A-25 VHN6-6M.......................... B-24
UC-251-6FP...................... A-25 VHN8-8EF......................... B-22
UC-251-6MP..................... A-25 VHN8-8EM........................ B-25
VEAC12-12F...................... B-28 VHN8-8F........................... B-22
VEAC12-12M..................... B-28 VHN8-8M.......................... B-24
VEAC4-4F......................... B-28 VIHC12-12F....................... A-35
VEAC4-4M........................ B-28 VIHC4-4F.......................... A-35
VEAC6-6F......................... B-28 VIHC4-4FSL....................... A-35
VEAC6-6M........................ B-28 VIHC4-4M......................... A-35
VEAC8-8F......................... B-28 VIHC4-4MSL...................... A-35
VEAC8-8M........................ B-28 VIHC6-6F.......................... A-35
VEAC8-SPK....................... B-27 VIHC6-6FSL....................... A-35
VEAN12-12F...................... B-29 VIHC6-6M......................... A-35
VEAN12-12M..................... B-29 VIHC6-6MSL...................... A-35
VEAN4-4F......................... B-29 VIHC8-8F.......................... A-35
VEAN4-4M........................ B-29 VPHC12-12EF.................... B-21
VEAN6-6F......................... B-29 VPHC12-12F...................... B-21
VEAN6-6M........................ B-29 VPHC6-6F......................... B-21
VEAN8-8F......................... B-29 VPHC8-8F......................... B-21
VEAN8-8M........................ B-29 VPHN8-8EM...................... B-25
VEAN8-SPK....................... B-27 VPHN8-8F......................... B-25
VHC12-12EFV.................... B-19
VHC12-12EM..................... B-21
VHC12-12F........................ B-19
VHC12-12M....................... B-20
VHC16-16EF...................... B-19
VHC16-16F........................ B-19
VHC16-16M....................... B-20
VHC20-20F....................... B-19
VHC24-24F....................... B-19
VHC32-32M....................... B-20
VHC4-2F........................... B-19
VHC4-2M.......................... B-20
VHC4-4EF......................... B-19
VHC4-4EM........................ B-21
VHC4-4F........................... B-19
VHC4-4M.......................... B-20
VHC6-6EF......................... B-19
VHC6-6EM........................ B-21
VHC6-6F........................... B-19
VHC6-6M.......................... B-20
VHC8-8EF......................... B-19
VHC8-8EM........................ B-21
VHC8-8F........................... B-19
VHC8-8M.......................... B-20
VHN12-12EF...................... B-22
VHN12-12EM..................... B-25
VHN12-12F........................ B-22
VHN12-12M....................... B-24
VHN16-16EF...................... B-22
VHN16-16F........................ B-22
VHN16-16M....................... B-24
VHN20-20F....................... B-22
VHN20-20M...................... B-24
VHN24-24F....................... B-22
Appendices
VHN32-32F....................... B-22
VHN4-2F........................... B-22
VHN4-2M.......................... B-24
VHN4-4EM........................ B-25
VHN4-4F........................... B-22
VHN4-4M.......................... B-24
VHN6-6EM........................ B-25
XVIII Parker Hannifin Corporation

Minneapolis, MN
Appendix Safety Guide
SAFETY GUIDE FOR SELECTING AND USING QUICK

ACTION COUPLINGS AND RELATED ACCESSORIES
DANGER: Failure or improper selection or improper use of quick action couplings or related accessories can cause
death, personal injury and property damage. Possible consequences of failure or improper selection or improper use
of quick action couplings or related accessories include but are not limited to:
• Couplings or parts thrown off at high speed. • Dangerously whipping hose.
• High velocity fluid discharge. • Contact with conveyed fluids that may be hot,
• Explosion or burning of the conveyed fluid. cold, toxic, or otherwise injurious.
• Contact with suddenly moving or falling objects • Sparking or explosion while paint or flammable
that are to be held in position or moved by the liquid spraying.
conveyed fluid.
Before selecting or using any Parker quick action couplings or related accessories, it is important that you read and
follow the following instructions.
1.1 Scope: This safety guide provides instructions pressures in the system higher than the rated pressure of the
for selecting and using (including installing connecting, coupling will shorten the quick action coupling’s life. Do not
disconnecting, and maintaining) quick action couplings and confuse burst pressure or other pressure values with rated
related accessories pressure and do not use burst pressure or other pressure values
(including caps, plugs, blow guns, and two way valves). This for this purpose.
safety guide is a supplement to and is to be used with, the 2.2 Fluid Compatibility: Quick action couplings selection
specific Parker publications for the specific quick action must assure compatibility of the body and seal materials with
couplings and related accessories that are being considered the fluid media used. See the fluid compatibility chart in the
for use. Parker publication for the product being considered or used.
1.2 Fail-Safe: Quick action couplings or the hose they are 2.3 Temperature: Be certain that fluid and ambient
attached to can fail without warning for many reasons. Design temperatures, both steady and transient, do not exceed the
all systems and equipment in a fail-safe mode, so that failure limitations of the quick action couplings. Use caution and hand
of the quick action coupling or hose will not endanger persons protection when connecting or disconnecting quick action
or property. couplings that are heated or cooled by the media they are
conducting or by their environment.
1.3 Distribution: Provide a copy of this safety guide to
each person that is responsible for selecting or using quick 2.4 Size: Transmission of power by means of pressurized
action coupling products. Do not select or use quick action liquid varies with pressure and rate of flow. The size of the
couplings without thoroughly reading and understanding this quick action couplings and other components of the system
safety guide as well as the specific Parker publications for the must be adequate to keep pressure losses to a minimum and
products considered or selected. avoid
damage due to heat generation or excessive fluid velocity.
1.4 User Responsibility: Due to the wide variety of operating
conditions and uses for quick action couplings, Parker and its 2.5 Pressurized Connect or Disconnect: If connecting or
distributors do not represent or warrant that any particular quick disconnecting under pressure is a requirement, use only
action coupling is suitable for any specific end use system. quick action couplings designed for that purpose. The rated
This safety guide does not analyze all technical parameters operating pressure of a quick action coupling may not be the
that must be considered in selecting a product. The user, pressure at which it may be safely connected or disconnected.
through
2.6 Environment: Care must be taken to ensure that quick
its own analysis and testing, is solely responsible for:
action couplings are either compatible with or protected from
• Making the final selection of the quick action couplings. the environment (that is, surrounding conditions) to which
• Assuring that the user’s requirements are met and that the they are exposed. Environmental conditions including but not
use presents no health or safety hazards. limited to ultraviolet radiation, ozone, moisture, water, salt
• Providing all appropriate health and safety warnings on the water, chemicals, and air pollutants can cause degradation
equipment on which the quick action couplings are used. and premature failure.
1.5 Additional Questions: Call the appropriate Parker 2.7 Locking Means: Ball locking quick action couplings can
customer service department if you have any questions or unintentionally disconnect if they are dragged over obstructions
require any on the end of a hose or if the sleeve is bumped or moved
additional information. For the telephone numbers of the enough to cause disconnect. Sleeves designed with flanges to
appropriate customer service department, see the Parker provide better gripping for oily or gloved hands are especially
publication for the product being considered or used. susceptible to accidental disconnect and should not be used
Appendices
where these conditions exist. Sleeve lock or union (threaded)

2.0 QUICK ACTION COUPLING SELECTION INSTRUC sleeve designs should be considered where there is a potential
TIONS for accidental uncoupling.
2.1 Pressure: Quick action couplings selection must be
2.8 Mechanical Loads: External forces can significantly
made so that the published rated pressure of the coupling is
reduce quick action couplings’ life or cause failure.
equal to or greater than the maximum system pressure. Surge
XIX Parker Hannifin Corporation

Minneapolis, MN
Appendix Safety Guide
Mechanical loads which must be considered include excessive taper pipe threads because cracking or splitting of the female
tensile or side loads, and vibration. Unusual applications component can result.
may require special testing prior to quick action couplings
selection. 3.4 Caps and Plugs: Use dust caps and plugs when quick
action couplings are not coupled to exclude dirt and
2.9 Specifications and Standards: When selecting contamination and to protect critical surfaces from damage.
quick action couplings, government, industry, and Parker
specifications must be reviewed and followed as applicable. 3.5 Coupling Location: Locate quick action couplings
2.10 Vacuum: Not all quick action couplings are suitable or where they can be reached for connect or disconnect without
recommended for vacuum service. Quick action couplings exposing the operator to slipping, falling, getting sprayed, or
used for vacuum applications must be selected to ensure that coming in contact with hot or moving parts.
the quick actions couplings will withstand the vacuum and 3.6 Hose Whips: Use a hose whip (a short length of hose
pressure of the system. between the tool and the coupling half) instead of rigidly
2.11 Fire Resistant Fluids: Some fire resistant fluids require mounting a coupling half on hand tools or other devices.
seals other than the standard nitrile used in many quick action This reduces the potential for coupling damage if the tool
couplings. is dropped and provides some isolation from mechanical
vibration which could cause uncoupling.
2.12 Radiant Heat: Quick action couplings can be heated
to destruction or loss of sealability without contact by such 4.0 QUICK ACTION COUPLING MAINTENANCE INSTRUC
nearby items as hot manifolds or molten metal. The same TIONS
heat source may then initiate a fire. This can occur despite the 4.1 Even with proper selection and installation, quick action
presence of cool air around the quick action couplings. coupling life may be significantly reduced without a continuing
maintenance program. Frequency should be determined
2.13 Welding and Brazing: Heating of plated parts, by the severity of the application and risk potential. A
including quick action couplings and port adapters, above maintenance program must be established and followed by
450°F (232°C) such as during welding, brazing, or soldering the user and must include the following as a minimum:
may emit deadly gases and may cause coupling seal damage.
4.2 Visual Inspection of Quick Action Couplings: Any of
3.0 QUICK ACTION COUPLING INSTALLATION the
INSTRUCTIONS following conditions require immediate shut down and
3.1 Pre-Installation Inspection: Before installing a quick replacement of the quick action coupling:
action coupling, visually inspect it and check for correct style, • Cracked, damaged, or corroded quick action coupling
body material, seal material, and catalog number. Before parts.
final installation, coupling halves should be connected and
disconnected with a sample of the mating half with which • Leaks at the fitting, valve or mating seal.
they will be used. • Broken coupling mounting hardware, especially breakaway
3.2 Quick Action Coupling Halves From Other clamps.
Manufacturers 4.3 Visual Inspection All Other: The following items must
If a quick action coupling assembly is made up of one Parker be tightened, repaired or replaced as required:
half and one half from another manufacturer, the lowest • Leaking seals or port connections.
pressure rating of the two halves should not be exceeded.
• Remove excess dirt buildup on the coupling locking means
3.3 Fitting Installation: Use a thread sealant, lubricant, or or on the interface area of either coupling half.
a combination of both when assembling pipe thread joints in
quick action couplings. Be sure the sealant is compatible with • Clamps, guards, and shields.
the system fluid or gas. To avoid system contamination, use • System fluid level, fluid type and any air entrapment.
a liquid or paste type sealant rather than a tape style. Use the 4.4 Functional Test: Operate the system at maximum
flats provided to hold the quick action coupling when installing operating pressure and check for possible malfunctions and
fittings. Do not use pipe wrenches or a vice on other parts freedom from leaks. Personnel must avoid potential hazardous
of the coupling to hold it when installing or removing fittings areas while testing and using the system.
as damage or loosening of threaded joints in the coupling
assembly could result. Do not apply excessive torque to 4.5 Replacement Intervals: Specific replacement
intervals must be considered based on previous service life,
government or industry recommendations, or when failures
could result in unacceptable downtime, damage or injury risk.
See instruction 1.2 above.
Additional copies of the preceding safety information can be

ordered by requesting “Safety Guide For Selecting and Using
Quick Action Couplings and Related Accessories,” Parker
Appendices
Publication No. 3800-B1.0
Contact The Quick Coupling Division, Minneapolis, MN.
XX Parker Hannifin Corporation

Minneapolis, MN
Appendix Offer of Sale
1. Definitions. As used herein, the following terms have the meanings indicated. written authorization from Seller, and any return shall be at the sole cost and
“Buyer” means any customer receiving a Quote for Products. expense of Buyer.
“Buyer’s Property” means any tools, patterns, plans, drawings, designs,
specifications materials, equipment, or information furnished by Buyer, or which 5. Warranty. The warranty for the Products is as follows:
are or become Buyer’s property. (i) Goods are warranted against defects in material or workmanship for a
“Confidential Information” means any technical, commercial, or other period of twelve (12) months from the date of delivery or 2,000 hours of use,
proprietary information of Seller, including, without limitation, pricing, technical whichever occurs first; (ii) Services shall be performed in accordance with
drawings or prints and/or part lists, which has been or will be disclosed, generally accepted practices and using the degree of care and skill that is
delivered, or made available, whether directly or indirectly, to Buyer. ordinarily exercised and customary in the field to which the Services pertain
“Goods” means any tangible part, system or component to be supplied by Seller. and are warranted for a period of six (6) months from the date of completion
“Intellectual Property Rights” means any patents, trademarks, copyrights, trade of the Services; and (iii) Software is only warranted to perform in accordance
dress, trade secrets or similar rights. with applicable specifications provided by Seller to Buyer for ninety (90)
“Products” means the Goods, Services and/or Software as described in a Quote. days from the date of delivery or, when downloaded by a Buyer or end-user,
“Quote” means the offer or proposal made by Seller to Buyer for the supply of from the date of the initial download. All prices are based upon the exclusive
Products. limited warranty stated above, and upon the following disclaimer: EXEMPTION
“Seller” means Parker-Hannifin Corporation, including all divisions, CLAUSE; DISCLAIMER OF WARRANTY, CONDITIONS, REPRESENTATIONS:
subsidiaries and businesses selling Products under these Terms. THIS WARRANTY IS THE SOLE AND ENTIRE WARRANTY, CONDITION, AND
“Seller’s IP” means patents, trademarks, copyrights, or other intellectual REPRESENTATION, PERTAINING TO PRODUCTS. SELLER DISCLAIMS ALL
property rights relating to the Products, including without limitation, names, OTHER WARRANTIES, CONDITIONS, AND REPRESENTATIONS, WHETHER
designs, images, drawings, models, software, templates, information, any STATUTORY, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THOSE
improvements or creations or other intellectual property developed prior to or RELATING TO DESIGN, NONINFRINGEMENT, MERCHANTABILITY, AND
during the relationship contemplated herein. FITNESS FOR A PARTICULAR PURPOSE. SELLER DOES NOT WARRANT THAT
“Services” means any services to be provided by Seller. THE SOFTWARE IS ERROR-FREE OR FAULT-TOLERANT, OR THAT BUYER’S
“Software” means any software related to the Goods, whether embedded or USE THEREOF WILL BE SECURE OR UNINTERRUPTED, UNLESS OTHERWISE
separately downloaded. AUTHORIZED IN WRITING BY SELLER, THE SOFTWARE SHALL NOT BE
“Special Tooling” means equipment acquired by Seller or otherwise owned by USED IN CONNECTION WITH HAZARDOUS OR HIGH-RISK ACTIVITIES OR
Seller necessary to manufacture Goods, including but not limited to tools, jigs, ENVIRONMENTS. EXCEPT AS EXPRESSLY STATED HEREIN, ALL PRODUCTS ARE
and fixtures. PROVIDED “AS IS”.
“Terms” means the terms and conditions of this Offer of Sale.
6. Claims; Commencement of Actions. Buyer shall promptly inspect all
2. Terms. All sales of Products by Seller will be governed by, and are Products upon receipt. No claims for shortages will be allowed unless reported
expressly conditioned upon Buyer’s assent to, these Terms. These Terms are to Seller within ten (10) days of delivery. Buyer shall notify Seller of any alleged
incorporated into any Quote provided by Seller to Buyer. Buyer’s order for any breach of warranty within thirty (30) days after the date the non-conformance
Products whether communicated to Seller verbally, in writing, by electronic is or should have been discovered by Buyer. Any claim or action against Seller
data interface or other electronic commerce, shall constitute acceptance of based upon breach of contract or any other theory, including tort, negligence, or
these Terms. Seller objects to any contrary or additional terms or conditions otherwise must be commenced within twelve (12) months from the date of the
of Buyer. Reference in Seller’s order acknowledgement to Buyer’s purchase alleged breach or other alleged event, without regard to the date of discovery.
order or purchase order number shall in no way constitute an acceptance of
any of Buyer’s terms or conditions of purchase. Any Quote made by Seller to 7. LIMITATION OF LIABILITY. IN THE EVENT OF A BREACH OF WARRANTY,
Buyer shall be considered a firm and definite offer and shall not be deemed to SELLER WILL, AT ITS OPTION, REPAIR OR REPLACE THE NON-CONFORMING
be otherwise despite any language on the face of the Quote. Seller reserves PRODUCTS, RE-PERFORM THE SERVICES, OR REFUND THE PURCHASE PRICE
all rights to accept or reject any purported acceptance by Buyer to Seller’s PAID WITHIN A REASONABLE PERIOD OF TIME. IN NO EVENT IS SELLER
Quote if such purported acceptance attempts to vary the terms of the Quote. LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL
If Seller ships Products after Buyer issues an acceptance to the Quote, any DAMAGES INCLUDING ANY LOSS OF REVENUE OR PROFITS, WHETHER BASED
additional or different terms proposed by Buyer will not become part of the IN CONTRACT, TORT OR OTHER LEGAL THEORY. IN NO EVENT SHALL SELLER’S
parties’ business relationship unless agreed to in a writing that is signed by LIABILITY UNDER ANY CLAIM MADE BY BUYER EXCEED THE PURCHASE PRICE
an authorized representative of Seller, excluding email correspondence. If the PAID FOR THE PRODUCTS.
transaction proceeds without such agreement on the part of Seller, the business
relationship will be governed solely by these Terms and the specific terms in 8. Confidential Information. Buyer acknowledges and agrees that Confidential
Seller’s Quote. Information has been and will be received in confidence and will remain the
property of Seller. Buyer further agrees that it will not use Seller’s Confidential
3. Price; Payment. The Products set forth in the Quote are offered for sale at the Information for any purpose other than for the benefit of Seller and shall return
prices indicated in the Quote. Unless otherwise specifically stated in the Quote, all such Confidential Information to Seller within thirty (30) days upon request.
prices are valid for thirty (30) days and do not include any sales, use, or other
taxes or duties. Seller reserves the right to modify prices for any reason and at 9. Loss to Buyer’s Property. Buyer’s Property will be considered obsolete and
any time by giving ten (10) days prior written notice. Unless otherwise specified may be destroyed by Seller after two (2) consecutive years have elapsed without
by Seller, all prices are F.C.A. Seller’s facility (INCOTERMS 2020). All sales are Buyer ordering the Products manufactured using Buyer’s Property. Also, Seller
contingent upon credit approval and full payment for all purchases is due thirty shall not be responsible for any loss or damage to Buyer’s Property while it is in
(30) days from the date of invoice (or such date as may be specified in the Quote). Seller’s possession or control.
Under any circumstances, Buyer may not withhold or suspend payment of any 10. Special Tooling. Seller may impose a tooling charge for any Special Tooling.
amounts due and payable as a deduction, set-off or recoupment of any amount, Special Tooling shall be and remain Seller’s property. In no event will Buyer
claim or dispute with Seller. Unpaid invoices beyond the specified payment date acquire any interest in the Special Tooling, even if such Special Tooling has
incur interest at the rate of 1.5% per month or the maximum allowable rate been specially converted or adapted for manufacture of Goods for Buyer and
under applicable law. Seller reserves the right to require advance payment notwithstanding any charges paid by Buyer. Unless otherwise agreed, Seller has
or provision of securities for first and subsequent deliveries if there is any the right to alter, discard or otherwise dispose of any Special Tooling or other
doubt, in Seller’s sole determination, regarding the Buyer’s creditworthiness property owned by Seller in its sole determination at any time.
or for other business reasons. If the requested advance payment or securities
are not provided to Seller’s satisfaction, Seller reserves the right to suspend 11. Security Interest. To secure payment of all sums due from Buyer, Seller
performance or reject the purchase order, in whole or in part, without prejudice retains a security interest in all Products delivered to Buyer and, Buyer’s
to Seller’s other rights or remedies, including the right to full compensation. acceptance of these Terms is deemed to be a Security Agreement under the
Seller may revoke or shorten any payment periods previously granted in Seller’s Uniform Commercial Code. Buyer authorizes Seller as its attorney to execute
sole determination. The rights and remedies herein reserved to Seller are and file on Buyer’s behalf all documents Seller deems necessary to perfect
cumulative and in addition to any other or further rights and remedies available Seller’s security interest.
at law or in equity. No waiver by Seller of any breach by Buyer of any provision
of these terms will constitute a waiver by Seller of any other breach of such 12. User Responsibility. Buyer, through its own analysis and testing, is solely
provision. responsible for making the final selection of the Products and assuring that
all performance, endurance, maintenance, safety and warning requirements
4. Shipment; Delivery; Title and Risk of Loss. All delivery dates are of the application of the Products are met. Buyer must analyze all aspects of
approximate, and Seller is not responsible for damages or additional costs the application and follow applicable industry standards, specifications, and
resulting from any delay. All deliveries are subject to our ability to procure any technical information provided with the Quote or the Products, such as
materials from our suppliers. Regardless of the manner of shipment, delivery Seller’s instructions, guides and specifications. If Seller provides options of
Appendices
occurs and title and risk of loss or damage pass to Buyer, upon placement of or for Products based upon data or specifications provided by Buyer, Buyer is
the Products with the carrier at Seller’s facility. Unless otherwise agreed prior responsible for determining that such data and specifications are suitable and
to shipment and for domestic delivery locations only, Seller will select and sufficient for all applications and reasonably foreseeable uses of the Products.
arrange, at Buyer’s sole expense, the carrier and means of delivery. When Seller In the event Buyer is not the end-user of the Products, Buyer will ensure such
selects and arranges the carrier and means of delivery, freight and insurance end-user complies with this paragraph.
costs for shipment to the designated delivery location will be prepaid by Seller
and added as a separate line item to the invoice. Buyer shall be responsible 13. Use of Products, Indemnity by Buyer. Buyer shall comply with all instructions,
for any additional shipping charges incurred by Seller due to Buyer’s acts or guides and specifications provided by Seller with the Quote or the Products. If Buyer
omissions. Buyer shall not return or repackage any Products without the prior uses or resells the Products in any way prohibited by Seller’s instructions, guides
XXI Parker Hannifin Corporation

Minneapolis, MN
Appendix Offer of Sale
or specifications, or Buyer otherwise fails to comply with Seller’s instructions, 21. Indemnity for Infringement of Intellectual Property Rights. Seller is not liable
guides and specifications, Buyer acknowledges that any such use, resale, or non- for infringement of any Intellectual Property Rights except as provided in this
compliance is at Buyer’s sole risk. Further, Buyer shall indemnify, defend, and hold Section. Seller will defend at its expense and will pay the cost of any settlement or
Seller harmless from any losses, claims, liabilities, damages, lawsuits, judgments damages awarded in an action brought against Buyer based on a third-party claim
and costs (including attorney fees and defense costs), whether for personal injury, that one or more of the Products infringes the Intellectual Property Rights of a third
property damage, intellectual property infringement or any other claim, arising out party in the country of delivery of the Products by Seller to Buyer. Seller’s obligation
of or in connection with: (a) improper selection, design, specification, application, or to defend and indemnify Buyer is contingent on Buyer notifying Seller within ten
any misuse of Products; (b) any act or omission, negligent or otherwise, of Buyer; (c) (10) days after Buyer becomes aware of any such claim, and Seller having sole
Seller’s use of Buyer’s Property; (d) damage to the Products from an external cause, control over the defense of the claim including all negotiations for settlement or
repair or attempted repair by anyone other than Seller, failure to follow instructions, compromise. If one or more Products is subject to such a claim, Seller may, at its
guides and specifications provided by Seller, use with goods not provided by sole expense and option, procure for Buyer the right to continue using the Products,
Seller, or opening, modifying, deconstructing, tampering with or repackaging the replace or modify the Products to render them non-infringing, or offer to accept
Products; or (e) Buyer’s failure to comply with these Terms, including any legal return of the Products and refund the purchase price less a reasonable allowance
or administrative proceedings, collection efforts, or other actions arising from for depreciation. Seller has no obligation or liability for any claim of infringement:
or relating to such failure to comply. Seller shall not indemnify Buyer under any (i) arising from information provided by Buyer (including Seller’s use of Buyer’s
circumstance except as otherwise provided in these Terms. Property); or (ii) directed to any Products for which the designs are specified in
whole or part by Buyer; or (iii) resulting from the modification, combination or use in
14. Cancellations and Changes. Buyer may not cancel or modify, including but not a system of any Products. The foregoing provisions of this Section constitute Seller’s
limited to movement of delivery dates for the Products, any order for any reason sole and exclusive liability and Buyer’s sole and exclusive remedy for claims of
except with Seller’s written consent and upon terms that will indemnify, defend and infringement of Intellectual Property Rights.
hold Seller harmless against all direct, incidental and consequential loss or damage
and any additional expense. Seller, at any time, may change features, specifications, 22. Governing Law. These Terms, the terms of any Quote, and the sale and delivery of
designs and availability of Products. all Products are deemed to have taken place in, and shall be governed and construed
in accordance with, the laws of the State of Ohio, as applicable to contracts executed
15. Assignment. Buyer may not assign its rights or obligations without the prior and wholly performed therein and without regard to conflicts of laws principles.
written consent of Seller. Buyer irrevocably agrees and consents to the exclusive jurisdiction and venue of the
courts of Cuyahoga County, Ohio with respect to any dispute, controversy or claim
16. Force Majeure. Seller is not liable for delay or failure to perform any of its arising out of or relating to the sale and delivery of the Products.
obligations by reason of any events or circumstances beyond its reasonable
control. Such circumstances include without limitation: accidents, labor disputes 23. Entire Agreement. These Terms, along with the terms set forth in the Quote,
or stoppages, government acts or orders, acts of nature, pandemics, epidemics, forms the entire agreement between the Buyer and Seller and constitutes the
other widespread illness, or public health emergency, cyber related disruptions, final, complete and exclusive expression of the terms of sale and purchase. In the
cyber-attacks, ransomware sabotage, delays or failures in delivery from carriers event of a conflict between any term set forth in the Quote and these Terms, the
or suppliers, shortages of materials, sudden increases in the price of raw material terms set forth in the Quote shall prevail. All prior or contemporaneous written
or components, shutdowns or slowdowns affecting the supply of raw materials or or oral agreements or negotiations with respect to the subject matter shall have
components, or the transportation thereof, oil shortages or oil price increases, no effect. No modification to these Terms will be binding on Seller unless agreed
energy crisis, energy or fuel interruption, war (whether declared or not) or the to in a writing that is signed by an authorized representative of Seller, excluding
serious threat of same, riots, rebellions, acts of terrorism, embargoes, fire or email correspondence, ‘clickwrap’ or other purported electronic assent to different
any reason whether similar to the foregoing or otherwise. Seller will resume or additional terms. Sections 2-25 of these Terms shall survive termination or
performance as soon as practicable after the event of force majeure has been cancellation of any agreement governed by or arising from these Terms.
removed. All delivery dates affected by an event of force majeure shall be tolled for
the duration of such event of force majeure and rescheduled for mutually agreed 24. No ‘Wrap’ Agreements/No Authority to Bind. Seller’s clicking any buttons or any
dates as soon as practicable after the event of force majeure ceases to exist. similar action, such as clicking “I Agree” or “Confirm,” to utilize Buyer’s software
The right to allocate capacity is in the Seller’s sole discretion. An event of force or webpage for the placement of orders, is NOT an agreement to Buyer’s Terms
majeure shall not include financial distress, insolvency, bankruptcy, or other similar and Conditions. NO EMPLOYEE, AGENT OR REPRESENTATIVE OF SELLER HAS THE
conditions affecting one of the parties, affiliates and/or sub¬contractors. An event AUTHORITY TO BIND SELLER BY THE ACT OF CLICKING ANY BUTTON OR SIMILAR
of force majeure in the meaning of these Terms means any circumstances beyond ACTION ON BUYER’S WEBSITE OR PORTAL.
Seller’s control that permanently or temporarily hinders performance, even where
that circumstance was already foreseen. Buyer shall not be entitled to cancel any 25. Compliance with Laws. Buyer agrees to comply with all applicable laws,
orders following its claim of an event of force majeure. regulations, and industry and professional standards, including those of the United
States of America, and the country or countries in which Buyer may operate,
17. Waiver and Severability. Failure to enforce any provision of these Terms will not including without limitation the U.S. Foreign Corrupt Practices Act (“FCPA”), the U.S.
invalidate that provision; nor will any such failure prejudice either party’s right to Anti-Kickback Act (“Anti-Kickback Act”), U.S. and E.U. export control and sanctions
enforce that provision in the future. Invalidation of any provision of these Terms shall laws (“Export Laws”), the U.S. Food Drug and Cosmetic Act (“FDCA”), and the rules
not invalidate any other provision herein and, the remaining provisions will remain in and regulations promulgated by the U.S. Food and Drug Administration (“FDA”), each
full force and effect. as currently amended. Buyer agrees to indemnify, defend, and hold harmless Seller
from the consequences of any violation of such laws, regulations and standards
18. Duration. Unless otherwise stated in the Quote, any agreement governed by or by Buyer, its employees or agents. Buyer represents that it is familiar with all
arising from these Terms shall: (a) be for an initial duration of one (1) year; and (b) applicable provisions of the FCPA, the Anti-Kickback Act, Export Laws, the FDCA
shall automatically renew for successive one-year terms unless terminated by Buyer and the FDA and certifies that Buyer will adhere to the requirements thereof and not
with at least 180-days written notice to Seller or if Seller terminates the agreement take any action that would make Seller violate such requirements. Buyer represents
pursuant to Section 19 of these Terms. and agrees that Buyer will not make any payment or give anything of value, directly
or indirectly, to any governmental official, foreign political party or official thereof,
19. Termination. Seller may, without liability to Buyer, terminate any agreement candidate for foreign political office, or commercial entity or person, for any
governed by or arising from these Terms for any reason and at any time by giving improper purpose, including the purpose of influencing such person to purchase
Buyer thirty (30) days prior written notice. Seller may immediately terminate, Products or otherwise benefit the business of Seller. Buyer further represents and
in writing, if Buyer: (a) breaches any provision of these Terms, (b) becomes or is agrees that it will not receive, use, service, transfer or ship any Products from Seller
deemed insolvent, (c) appoints or has appointed a trustee, receiver or custodian for in a manner or for a purpose that violates Export Laws or would cause Seller to be
all or any part of Buyer’s property,(d) files a petition for relief in bankruptcy on its in violation of Export Laws. Buyer agrees to promptly and reliably provide Seller
own behalf, or one is filed against Buyer by a third party, (e) makes an assignment all requested information or documents, including end-user statements and other
for the benefit of creditors; or (f) dissolves its business or liquidates all or a majority written assurances, concerning Buyer’s ongoing compliance with Export Law.
of its assets.
20. Ownership of Rights. Buyer agrees that (a) Seller (and/or its affiliates) owns
or is the valid licensee of Seller’s IP and (b) the furnishing of information, related
documents or other materials by Seller to Buyer does not grant or transfer
any ownership interest or license in or to Seller’s IP to Buyer, unless expressly
agreed in writing. Without limiting the foregoing, Seller retains ownership of all
Software supplied to Buyer. In no event shall Buyer obtain any greater right in and
to the Software than a right in a license limited to the use thereof and subject to
compliance with any other terms provided with the Software. Buyer further agrees
Appendices
that it will not, directly or through intermediaries, reverse engineer, decompile, or

disassemble any Software (including firmware) comprising or contained within a
Product, except and only to the extent that such activity may be expressly permitted,
either by applicable law or, in the case of open source software, the applicable open
source license.
XXII Parker Hannifin Corporation

Minneapolis, MN
Appendix Glossary of Terms
Air Inclusion: The ambient atmosphere forced into the system during Pressure Operating: The pressure at which a system
the connection of the quick disconnect halves. is operated.
Break-Away: Automatic disconnection of a coupling when an axial Pressure Plug: Plug which incorporates a seal capable of
separation force is applied. withstanding the rated pressures on the female half.
Brinelling: Dimples or grooves worn into the shoulder of a male half Proof Pressure: The non-destructive test pressure in excess
by the locking balls in the female half. of the maximum rated operating pressure.
Burst Pressure: The pressure at which a device loses the Push To Connect (Auto Lock): Locking arrangement which permits
capability to retain pressure. one handed connection by pushing the nipple into
the coupler.
Case Hardening: Hardening the surface of low carbon steel.
Rated Pressure: The maximum pressure at which a product
Cold Flow: Continued deformation under load.
is designed to operate.
Connect Under Pressure: Ability to connect coupling halves with
Single-Acting Sleeve: Permits pull-to-disconnect convenience on
internal line pressure applied to either both sides or
implement line when female body is clamp mounted.
one side.
Making connection requires manually pulling female body
Coupling, Female Half: Other nomenclature “coupler”, “socket”, forward, inserting male tip, then allowing body and tip to return to
“body”. original position in the clamp.
Coupling, Male Half: Other nomenclature “nipple”, “plug”, Sleeve Lock: Arrangement which provides an additional
“adapter”. lock which must be actuated before the locking sleeve can
be retracted.
Coupling, Quick Disconnect: A component which can
quickly join or separate a fluid line without the use of tools Spillage: The fluid removed from the system due to
or special devices. disconnection of a coupling assembly. This is the fluid
trapped between the mating seal and the valve seal of the
Differential Pressure (ÆP): The difference in pressure
coupling halves.
between any two points of a system or a component.
Surge Pressure: The pressure existing from surge conditions.
Double-Acting Sleeve: Permits push-to-connect and pull-to-dis-
connect convenience on implement line when female half Surge Flows: A rapid increase in fluid flow.
is clamp mounted and connected with a hose.
Thermal Build-Up: Hydraulic pressure caused by expansion of the
Dust Cap: Dust or dirt repelling enclosure for both halves. fluid due to heat from an external source such as sunlight.
Dust Plug: Dust or dirt repelling enclosure both halves. Trapped Pressure: Pressurized hydraulic fluid trapped behind
closed coupling valve.
Flow Checking: Occurs when a nipple valve closes during
flow conditions, such as when quickly lowering a heavy Twist Lock: A locking arrangement which requires a rotational actua-
implement.(Also called Check Off, Back Checking or Lock-up.) tion to unlock the mating halves.
Flush Position (Valve): When the coupler valve is fully open, allow- Types of Quick Disconnect Coupling Valve:
ing maximum oil flow. Straight-Thru (ST): This provides straight through flow.
Force to Connect: Axial and/or rotational force required to make a Double Shut-off Valve (DSO): A valve in the female half and a
complete connection. valve in the male half.
Force to Disconnect: The reverse of the above. Single Shut-off Valve (SSO): Generally, a valve in the female half
with no valve in the male half.
Induction Hardening: Localized hardening of medium
carbon steel.
NOTE: Refer to Parker’s Publication No. 3800-B1.0: Safety Guide for
Peak Pressure: Maximum momentary pressure encountered Selecting and Using Quick Action Couplings and
in the operation of a component. Related Accessories.
Appendices
Pressure Cap: Cap which incorporates a seal capable of

withstanding the rated pressures on the male half.
Pressure Impulse Test: Subjecting a component to a specified
pressure at a specified rate of increase or decrease for a
specified time limit.
XXII Parker Hannifin Corporation

Minneapolis, MN
Minneapolis, MN
About Parker Hannifin Corporation
Parker Hannifin is a Fortune 250 global leader in motion and control technologies. For more than 100 years the company has
engineered the success of its customers in a wide range of diversified industrial and aerospace markets. Parker’s engineering
expertise and broad range of core technologies uniquely positions the company to help solve the world’s greatest engineering
challenges.
Parker’s Charter
To be a leading worldwide manufacturer of components and systems for the builders and users of durable goods. More
specifically, we will design, market and manufacture products controlling motion, flow and pressure. We will achieve
profitable growth through premier customer service.
Product Information
North American customers seeking product information, the location of a nearby distributor, or repair services will receive
prompt attention by calling the Parker Product Information Center at our toll-free number: 1-800-C-PARKER (1-800-272-
7537).
In Europe, call: 00800-C-PARKER-H (00800-2727-5374).
Parker Aerospace is a global leader in flight control actuation, hydraulic, fuel, inerting, fluid conveyance, pneumatic
and lubrication systems and components used on virtually every commercial and military aerospace platform in
production today, from commercial transports, helicopters, and business and general aviation, to military fixed-
wing planes and unmanned aerial vehicles.
The Fluid Connectors & Instrumentation Group, the leader in "dry technology" for the fluid power industry, is your
single source for high-quality tube fittings, hose and hose fittings, thermoplastic tubing, brass fittings and valves,
quick-disconnect couplings and assembly tools. Products are available for shipment 24 hours a day, supported by
49 manufacturing facilities throughout the world, a global distribution network and 25 company-owned stocking
service centers.
Parker's Motion Systems Group provides three technologies that create and control motion to customers across
major mobile and industrial markets.
Hydraulics: the use of pressurized fluid

Pneumatics: the use of pressurized air
Electromechanical: the use of electricity
Parker’s best-in-class components and system solutions are known for their durability, reliability, power density, low
noise, efficiency and ease of use. This competitive advantage improves productivity and throughput while reducing
energy and fuel consumption for customers worldwide.
The Engineered Materials Group develops and manufactures engineered solutions. Our products play an
important role in the safe and reliable operation of critical equipment in hospitals, laboratories, and in everything
from semiconductor processing fabs to airplanes and heavy-duty trucks. Additionally, our precision plastic and
elastomeric components are used in a variety of medical devices and healthcare equipment. Our shielding and
grounding products protect critical electronics from the harmful effects of electromagnetic interference (EMI).
In addition, our thermally conductive fillers, gels and interface materials cool hot microprocessors and power
supplies. Parker’s broad range of adhesives deliver structural integrity and resistance to environmental extremes.
Finally, our vibration isolation and advanced sensing technologies provide risk mitigation while delivering superior
comfort and performance.
The Instrumentation Group is dedicated to being the global leader in the design, manufacture and distribution of
high quality, critical flow and ultra high purity components for the petrochemical, chemical processing, oil and gas,
power generation, water analysis, biopharmaceutical, semiconductor, and analytical equipment industries.
Parker Fluid Connectors Group
North American Divisions & Distribution Service Centers
Your complete source for quality North American Divisions Distribution Service Centers
tube fittings, hose & hose fittings,
brass & composite fittings, quick- Fluid System Connectors Buena Park, CA
disconnect couplings, valves and Division phone 714 522 8840
assembly tools, locally available Otsego, MI fax 714 994 1183
from a worldwide network of phone 269 694 9411
authorized distributors. fax 269 694 4614 Louisville, KY
phone 502 937 1322
Fittings: Hose Products Division fax 502 937 4180
Available in inch and metric sizes Wickliffe, OH
covering SAE, BSP, DIN, GAZ, JIS phone 440 943 5700 Toledo, OH
and ISO thread configurations, fax 440 943 3129 phone 419 878 7000
manufactured from steel, fax 419 878 7001
stainless steel, brass, aluminum, Parflex Division fax 419 878 7420
nylon and thermoplastic. Ravenna, OH (FCG Kit Operations)
phone 330 296 2871
Hose, Tubing and Bundles: fax 330 296 8433 Canada
Available in a wide variety of sizes Milton, ONT
and materials including rubber, Quick Coupling Division phone 905 693 3000
wire-reinforced, thermoplastic, Minneapolis, MN fax 905 876 1958
hybrid and custom compounds. phone 763 544 7781
fax 763 544 3418 Mexico
Worldwide Availability: Toluca, MEX
Parker operates Fluid Connectors Tube Fittings Division phone (52) 722 2754 200
manufacturing locations and Columbus, OH fax (52) 722 2722 168
sales offices throughout North phone 614 279 7070
America, South America, Europe fax 614 279 7685
and Asia-Pacific.
For information, call toll free...
1-800-C-PARKER
(1-800-272-7537)
© 2023 Parker Hannifin Corporation Catalog 3800 /USA 5M 05/23 QCD W

8145 Lewis Road
Minneapolis, MN 55427
phone 763 544 7781
fax 763 544 3418

Catalog 3800 Quick Coupling Products

Uploaded by

Copyright:

Available Formats

Catalog 3800 Quick Coupling Products

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Catalog 3800 Quick Coupling Products

Uploaded by

Copyright:

Available Formats

FOR MOST UPDATED

Quick Coupling Products

Quick Couplings, Swivels, Valves,

Chetek, WI Union City, PA

© 2023 Parker Hannifin Corporation, All Rights Reserved.

* UC Series is a replacement for the HA Series.

Parker Hannifin Corporation

Parker Hannifin Corporation

DC Series ............................................................. E-12

CPIFF Series (soft seat).......................................... E-14

S6C Series (soft seat)............................................ E-15

3C Series (soft seat).............................................. E-15

2600 Series (swing type)........................................ E-17

Pressure/Vacuum Relief Valves

Thermal Bypass Valves

Parker Hannifin Corporation

Checklist for Selecting Quick Couplings

A-1 Parker Hannifin Corporation

Interchange Match-up Chart............................. ..A-5

Schrader Twist-Lock Interchange

Special Purpose Couplings

* UC Series is a replacement for the HA Series.

A-2 Parker Hannifin Corporation

Pneumatic Coupling Selection Guide (by Interchange)

Industrial Interchange Couplers

Tru-Flate Interchange Couplings

ARO 210 Interchange Couplings

Lincoln “Long Stem” Interchange Couplings

Common High-Flow European Interchange Couplings

* Material Code: B = Brass, S = Steel, SS = Stainless Steel, P = Plastic

A-3 Parker Hannifin Corporation

Pneumatic Coupling Selection Guide

* Material Code: B = Brass, S = Steel, SS = Stainless Steel, P = Plastic

** Spectrum Series material options:

A-4 Parker Hannifin Corporation

Popular Coupling Designs

10 Series 20 Series, 30 Series, 50 Series (ARO-210 Interchange)

1/4” Body Size

1/8” Body Size

3/8” Body Size

1/4” Body Size 70 Series (Lincoln Interchange)

1/2” Body Size

1/4” Body Size

1/4” Body Size

1/4” Body Size

1/2” Body Size

3/4” Body Size

A-5 Parker Hannifin Corporation

Parker Industrial Interchange Nipples are compatible for use

or E-z-mate couplers. The standard male tip of the pneumatic

Nipples - Female Pipe Thread

Part Number Exposed

A-6 Parker Hannifin Corporation

Nipples - Male Pipe Thread

Nipples - Standard Hose Barb

Part Number Exposed

A-7 Parker Hannifin Corporation

Nipples - Push-Lok Hose Barb**

Body Part Number Part Number Exposed Largest