Data sheet 3RV2011-1CA10

Circuit breaker size S00 for motor protection, CLASS 10 A-release 1.8...2.5
A N-release 33 A screw terminal Standard switching capacity

product brand name SIRIUS

product designation Circuit breaker
design of the product For motor protection
product type designation 3RV2
General technical data
size of the circuit-breaker S00
size of contactor can be combined company-specific S00, S0
product extension auxiliary switch Yes
power loss [W] for rated value of the current
● at AC in hot operating state 7.25 W
● at AC in hot operating state per pole 2.4 W
insulation voltage with degree of pollution 3 at AC rated 690 V
value
surge voltage resistance rated value 6 kV
shock resistance according to IEC 60068-2-27 25g / 11 ms
mechanical service life (operating cycles)
● of the main contacts typical 100 000
● of auxiliary contacts typical 100 000
electrical endurance (operating cycles) typical 100 000
type of protection according to ATEX directive Ex II (2) GD
2014/34/EU
certificate of suitability according to ATEX directive DMT 02 ATEX F 001
2014/34/EU
reference code according to IEC 81346-2 Q
Substance Prohibitance (Date) 10/01/2009
Ambient conditions
installation altitude at height above sea level maximum 2 000 m
ambient temperature
● during operation -20 ... +60 °C
● during storage -50 ... +80 °C
● during transport -50 ... +80 °C
relative humidity during operation 10 ... 95 %
Main circuit
number of poles for main current circuit 3
adjustable current response value current of the 1.8 ... 2.5 A
current-dependent overload release
operating voltage
● rated value 20 ... 690 V
● at AC-3 rated value maximum 690 V
● at AC-3e rated value maximum 690 V
operating frequency rated value 50 ... 60 Hz
operational current rated value 2.5 A

3RV20111CA10 Subject to change without notice

1/18/2023
Page 1/6 © Copyright Siemens
 operational current
● at AC-3 at 400 V rated value 2.5 A
● at AC-3e at 400 V rated value 2.5 A
operating power
● at AC-3
— at 230 V rated value 0.4 kW
— at 400 V rated value 0.75 kW
— at 500 V rated value 1.1 kW
— at 690 V rated value 1.5 kW
● at AC-3e
— at 230 V rated value 0.4 kW
— at 400 V rated value 0.75 kW
— at 500 V rated value 1.1 kW
— at 690 V rated value 1.5 kW
operating frequency
● at AC-3 maximum 15 1/h
● at AC-3e maximum 15 1/h
Auxiliary circuit
number of NC contacts for auxiliary contacts 0
number of NO contacts for auxiliary contacts 0
number of CO contacts for auxiliary contacts 0
Protective and monitoring functions
product function
● ground fault detection No
● phase failure detection Yes
trip class CLASS 10
design of the overload release thermal
maximum short-circuit current breaking capacity (Icu)
● at AC at 240 V rated value 100 kA
● at AC at 400 V rated value 100 kA
● at AC at 500 V rated value 100 kA
● at AC at 690 V rated value 10 kA
operating short-circuit current breaking capacity (Ics)
at AC
● at 240 V rated value 100 kA
● at 400 V rated value 100 kA
● at 500 V rated value 100 kA
● at 690 V rated value 10 kA
response value current of instantaneous short-circuit trip 33 A
unit
UL/CSA ratings
full-load current (FLA) for 3-phase AC motor
● at 480 V rated value 2.5 A
● at 600 V rated value 2.5 A
yielded mechanical performance [hp]
● for single-phase AC motor
— at 230 V rated value 0.17 hp
● for 3-phase AC motor
— at 200/208 V rated value 0.5 hp
— at 220/230 V rated value 0.5 hp
— at 460/480 V rated value 1 hp
— at 575/600 V rated value 1.5 hp
Short-circuit protection
product function short circuit protection Yes
design of the short-circuit trip magnetic
design of the fuse link for IT network for short-circuit
protection of the main circuit
● at 400 V gL/gG 25 A
● at 500 V gL/gG 25 A
● at 690 V gL/gG 20 A
Installation/ mounting/ dimensions
mounting position any
fastening method screw and snap-on mounting onto 35 mm DIN rail according to DIN EN

3RV20111CA10 Subject to change without notice

1/18/2023
Page 2/6 © Copyright Siemens
 60715
height 97 mm
width 45 mm
depth 97 mm
required spacing
● with side-by-side mounting at the side 0 mm
● for grounded parts at 400 V
— downwards 30 mm
— upwards 30 mm
— at the side 9 mm
● for live parts at 400 V
— downwards 30 mm
— upwards 30 mm
— at the side 9 mm
● for grounded parts at 500 V
— downwards 30 mm
— upwards 30 mm
— at the side 9 mm
● for live parts at 500 V
— downwards 30 mm
— upwards 30 mm
— at the side 9 mm
● for grounded parts at 690 V
— downwards 50 mm
— upwards 50 mm
— backwards 0 mm
— at the side 30 mm
— forwards 0 mm
● for live parts at 690 V
— downwards 50 mm
— upwards 50 mm
— backwards 0 mm
— at the side 30 mm
— forwards 0 mm
Connections/ Terminals
type of electrical connection
● for main current circuit screw-type terminals
arrangement of electrical connectors for main current Top and bottom
circuit
type of connectable conductor cross-sections
● for main contacts
— solid or stranded 2x (0,75 ... 2,5 mm²), 2x 4 mm²
— finely stranded with core end processing 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
● at AWG cables for main contacts 2x (18 ... 14), 2x 12
tightening torque
● for main contacts with screw-type terminals 0.8 ... 1.2 N·m
design of screwdriver shaft Diameter 5 to 6 mm
size of the screwdriver tip Pozidriv size 2
design of the thread of the connection screw
● for main contacts M3
Safety related data
B10 value
● with high demand rate according to SN 31920 5 000
proportion of dangerous failures
● with low demand rate according to SN 31920 50 %
● with high demand rate according to SN 31920 50 %
failure rate [FIT]
● with low demand rate according to SN 31920 50 FIT
T1 value for proof test interval or service life according to 10 a
IEC 61508
protection class IP on the front according to IEC IP20
60529
touch protection on the front according to IEC 60529 finger-safe, for vertical contact from the front
display version for switching status Handle

3RV20111CA10 Subject to change without notice

1/18/2023
Page 3/6 © Copyright Siemens
Certificates/ approvals
General Product Approval

Confirmation KC

For use in hazardous locations Declaration of Conformity Test Certificates

Special Test Certific- Type Test Certific-

ate ates/Test Report

Marine / Shipping

Marine / Shipping other Railway

Confirmation Confirmation Vibration and Shock

Further information
Information on the packaging
https://support.industry.siemens.com/cs/ww/en/view/109813875
Information- and Downloadcenter (Catalogs, Brochures,…)
https://www.siemens.com/ic10
Industry Mall (Online ordering system)
https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3RV2011-1CA10
Cax online generator
http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3RV2011-1CA10
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
https://support.industry.siemens.com/cs/ww/en/ps/3RV2011-1CA10
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...)
http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3RV2011-1CA10&lang=en
Characteristic: Tripping characteristics, I²t, Let-through current
https://support.industry.siemens.com/cs/ww/en/ps/3RV2011-1CA10/char
Further characteristics (e.g. electrical endurance, switching frequency)
http://www.automation.siemens.com/bilddb/index.aspx?view=Search&mlfb=3RV2011-1CA10&objecttype=14&gridview=view1

3RV20111CA10 Subject to change without notice

1/18/2023
Page 4/6 © Copyright Siemens
3RV20111CA10 Subject to change without notice
1/18/2023
Page 5/6 © Copyright Siemens
 1/L1

3/L2

5/L3
-F

I> I> I>

2/T1

4/T2

6/T3

last modified: 11/21/2022

3RV20111CA10 Subject to change without notice

1/18/2023
Page 6/6 © Copyright Siemens