WVS 250

WVS 250

STANDARD SPECIFICATIONS
1.
Volvo
ENGINEfour stroke heavy duty high performance industrial type
diesel engine

2. ENGINE FILTRATION SYSTEM

Output Ratings Prime Standby • Cartridge type dry air filter
• Two cartridge type fuel filters
• Full flow lube oil filter
400 V,3 ph,50 Hz,1500 rpm 250 kVA 274 kVA All filters have replacable elements

3. COOLING RADIATOR
200 kW 219 kW Radiator and cooling fan, complete with safety guards,de-
signed to cool the engine at high ambient temperatures(con-
480 V,3 ph,60 Hz,1800 rpm 257 kVA 279 kVA sult your dealer for deration factors)

4. EXHAUST SYSTEM
203 kW 224 kW Heavy duty Industrial Exhaust Silencer

Silencer noise reduction level 14 (dB)

Power Factor : 0.8 Maximum allowable back pressure 10.0(kPa)

5. CIRCUIT BREAKER TYPE

ABB 3 pole MCCB.(4 pole is optional)

6. FUEL SYSTEM
On Generating sets upto 700kVA, the baseframe
design is incorporated with an integral fuel tank with a capacity
of approx. 8 hours running at full load. The tank is supplied
complete with fill cap breather, fuel speed and return lines to
the engine and drain plug.

7. ALTERNATOR
7.1 INSULATION SYSTEM
• Insulation : Class H
Engine Make Volvo Penta • All windings are impregnated in either a triple dip
thermosetting liquid,oil and acid resisting polyester varnish or
Engine Model TAD734GE vaccum pressure impregnated with a special polyester resin.
• Heavy coat of antitracking varnish additional protection
against moisture or condenasation.
Governing Type Electronic
7.2 AUTOMATIC VOLTAGE REGULATOR (AVR)
Number of Cylinders 6 The fully sealed AVR maintains the voltage regulation at ±0.5%.
Nominal adjustment by means of a trim pot incorporated on
the AVR.
Cylinder Arrangement Vertical In Line
7.3 MOTOR STARTING
An overload capacity equivalent to 300% of the full load
Bore and Stroke mm 108x130 impedance at zero power factor can be sustained for 10
sec.,when AREP or PMG option is fitted.
Displacement / Cubic Capacity ltrs 7.15
8. MOUNTING ARRANGEMENT
8.1 BASE FRAME
Aspiration Turbocharged The complete generating set is mounted as a whole on a heavy
duty fabricated steel baseframe.
Cycle 4 stroke
8.2 COUPLING
The engine and alternator are directly coupled by means of an
Combustion System Direct Injection SAE flange.The engine flywheel is flexibly coupled to the
alternator rotor.
Compression Ratio 17:1 8.3 ANTI-VIBRATION MOUNTING PADS
Anti-vibration pads are affixed between the engine / alternator
feet and the baseframe thus ensuring complete vibration
isolation of the rotating assembly.
 Powered by :

ENGINE / TECHNICAL DATA (continued)

Frequency and Engine Speed 50Hz & 1500rpm 60Hz & 1800rpm

Prime Prime

Gross Engine Power kWm 219 223

Fuel Consumption @50%load l/hr 30.09 31.31

@75%load l/hr 42.043 44

@100%load l/hr 52.7 54.78

Oil Consumption (l/hr) 0.03 0.03

Oil Sump Capacity, l 24 24

Heat Rejection at Exhaust (Standby) kW 177 189

Exhaust Temperature °C Standby 550 510

Radiator Cooling Air Flow : m³/s 5.2 6.5

Combustion Air Flow (Standby) : m³/min 16.3 18.9

Exhaust Gas Flow (Standby) : m³/min 33.4 37.9

Dimension (mm) & Weight (Kg) Length Width Height Weight

Open 2862 1071 1818 2650
Soundproof 3995 1410 2270 3300 STANDARD SPECIFICATIONS
8.4 SAFETY GUARDS
The fan and fan drive along with the battery charging alternator
are safety guard protected for personnel protection.

9. FACTORY TESTS
▪ The generating set is load tested before dispatch.
▪ All protective devices control functions and site load
Make Leroy Somer TAL / Stamford conditions are simulated.The generator and it's systems are
checked before dispatch.
Model TAL 046D / UCDI274K 10. EQUIPMENT FINISHING
All mild steel components are fully degreased and painted with
No. of bearings 1 powder coated paint to ensure maximum scuff resistance and
durability.

Insulation Class H 11. DOCUMENTATIONS

Operation and Maintenance manual, circuit wiring diagrams
and commissioning/fault finding instruction leaflets are
Total Harmonic Content On load 3.5% accompanied with the generator.

Wires 6 / 12 CONTROL PANEL

Make Deep Sea

Ingress Protection IP23 Model DSE4510
The DSE4510 is an Auto Start Control Module for single genset
Excitation System Shunt / Self Excited applications.It includes a backlit LCD display which clearly shows
the status of the engine all the times.This module can either be
programmed using the front panel or by using the DSE
Winding Pitch 2/3(n˚6) configuration suitr PC software.

AVR Model R150 / SX460 Metering and Alarm Indications:

▪ Generator Frequency ▪ Emergency Stop

Overspeed 2250 mn⁻¹ ▪ Underspeed, Overspeed ▪ Failed to reach loading
▪ Generator volts(L-L,L-N) voltage/frequency
Voltage Regulation ±1% ▪ Generator Current ▪ Charge fail
▪ Engine Oil Pressure ▪ Loss of magnetic pick-up
▪ Engine Coolant Temperature signal-Optional
Short Circuit Capacity - ▪ Fuel Level ▪ Low DC Voltage
▪ Hours Run Counter ▪ CAN diagnostics and CAN
▪ Battery Volts fail/error
AREP & PMG Excitation System Available as optional ▪ Fail to start/stop
P O Box: 393763, Dubai Investment Park 1, Dubai-UAE

Tel. : +971 4 88 55 336

www.exeuae.com
E-mail: [email protected]

Abu Dhabi Dubai