MTCNA 4

1. Choose the correct PCQ argument values to allow 256kbps

maximum download and upload for each client:
4 points
A. kind=pcq pcq-rate=5000000 pcq-classifier=src-address
B. kind=pcq pcq-rate=256000 pcq-classifier=src-address
C. kind=pcq pcq-rate=1256000 pcq-classifier=dst-address
D. kind=pcq pcq-rate=5000000 pcq-classifier=dst-address
E. kind=pcq pcq-rate=256000 pcq-classifier=dst-address
2. You can control bandwidth of a client connected to AP with the
resource / interface wireless access-list ( assume the client uses
MikroTik RouterOS). 
4 points
Choose
3. Netinstall can be used to
4 points
A. Reinstall software without losing licence
B. Install different software version (upgrade or downgrade)
C. Install package for different hardware architecture
D. Keep configuration, but reset a lost admin password
4. Which is the default port of IP-Winbox?
4 points
A. TCP 8192
B. TCP 80
C. TCP 8291
D. UDP 8291
5. Which of the following Routes statuses are possible?
4 points
A. S = Static
B. D = Drop
C. A = Active
D. C = Connected
6. A RouterBOARD clock is configured in '/system clock'. The
clock resets to default after each reboot. Select the best solution
for the problem. 
4 points
A. Write a script in '/system script' to set the clock
B. Open the router and ensure the CMOS battery is fine
C. Configure '/system ntp server' and set a valid and reachable NTP client
address
D. Configure '/system ntp client' and set a valid and reachable NTP server
address
7. MikroTik RouterOS commands can be run once a day by:
4 points
A. /system scheduler
B. /system cron
C. /system watchdog
8. What is necessary for PPPoE client configuration?
4 points
A. Interface (on which PPPoE client is going to work)
B. ip firewall nat masquerade rule
C. Static IP address on PPPoE client interface
9. What is the minimal required wireless configuration to create an
access point?
4 points
A. scan-list
B. DFS mode
C. band
D. mode
E. radio name
F. ssid
G. frequency
H. WDS
10. What can be used as "Target" in the simple queue?
4 points
A. Server IP address
B. Client MAC address
C. Address list name
D. Client IP address
11. RouterOS log messages are stored on disk by default
4 points
Choose
12. PPPoE server only works within one Ethernet broadcast
domain that it is connected to. If there is a router between server
and end-user host, it will not be able to create PPPoE tunnel to
that PPPoE server.
4 points
True
False
13. Which option in the configuration of a wireless card must be
disabled to cause the router to permit ONLY known clients listed
in the access list to connect? 
4 points
A. Default Forward
B. Default Authenticate
C. Enable Access List
D. Security Profile
14. Mark all correct statements about command 'export
file={name of the script file}' :
4 points
A. Full configuration of the router (without RouterOS user passwords) can be
exported
B. Only part of the configuration (for example /ip firewall) can be exported
C. Log entries from /log print can be exported
D. Export files can not be edited
15. Possible actions of ip firewall filter are:
4 points
A. bounce
B. accept
C. tarp
D. add-to-list
E. log
F. tarpit
16. Mark all correct answers about wireless:
4 points
A. /ip firewall filter allows to deny authentication to the AP
B. Forwarding between clients can be enabled by using wireless access-list
C. Wireless access-list on the access point (AP) can be used to allow or deny
client connection to your AP
D. The only way to prevent wireless client connections is to disable wireless
interface
17. How many different priorities can be selected for queues in
MikroTik RouterOS?
4 points
A. 1
B. 16
C. 8
D. 0
18. Which of the following is true for connection tracking
4 points
A. Enabling connection tracking reduces CPU usage in RouterOS
B. Disable connection tracking for mangle to work
C. Connection tracking must be enabled to be able to use all firewall features
D. Connection tracking must be enabled for NAT'ed network
19. PPP Secrets are used for
4 points
A. L2TP clients
B. PPP clients
C. Router users
D. PPtP clients
E. PPPoE clients
F. IPSec clients
20. Which port does PPTP use by default?
4 points
A. TCP 1721
B. TCP 1723
C. UDP 1721
D. UDP 1723
21. To use masquerade, you need to specify
4 points
A. action=masquerade, in-interface, chain=src-nat
B. action=masquerade, out-interface, chain=src-nat
C. action=accept, out-interface, chain=src-nat
D. action=masquerade, out-interface, chain=dst-nat
22. The 'check-gateway' option is enabled for one route. Select all
statements that are true:
0 points
A. Gateway is checked every 10 seconds and after 2 failures, the gateway is
considered unreacheable
B. In case of failure of the gateway, routes pointing to that gateway will
become inactive
C. Check gateway option can be configured for Ping, ARP and RARP (reverse
ARP)
D. Gateway is checked every 10 seconds and after a single failure, the
gateway is considered unreacheable
23. /ip route configuration on router, :
4 points

A. 192.168.0.2
B. 192.168.0.3
C. 192.168.0.4
D. 192.168.0.1
24. How long is level 1 (free) license valid?
4 points
A. 24 hours
B. 1 month
C. Infinite time
D. 1 year
25. What does the firewall action "Redirect" do? Select all true
statements.
4 points
A. Redirects a packet to a specified port on the router
B. Redirects a packet to the router
C. Redirects a packet to a specified port on a host in the network
D. Redirects a packet to a specified IP