Republic of the Philippines

Department of Education
Region V
Division of Camarines Sur
SIPACO NATIONAL HIGH SCHOOL
Sipaco, Lagonoy, Camarines Sur
S/Y 2022-2023

4th QUARTERLY EXAMAMINATION FOR TECHNOLOGY and LIVELIHOOD EDUCATION 8

(Masonry)

Name:____________________________________ Date: ________________ Score: _________

Grade/Section: ____________________________ Parent signature:______________________

Directions: Read the question properly. Encircle the letter of the correct answer.

1. Which is the structural construction of component parts laid in and bound together by a material called mortar?
a. Building Construction c. CHB
b. Masonry d. Stone

2. Which of the following is not a masonry material?

a. brick c. glass block
b. granite d. trowel

3. Which requires that quality of masonry materials should be of general standards?

a. Association of Phil. Architectures
b. Association of Phil. Engineers
c. 2003 International Building Code
d. 2003 International Baptist Code

4. What material reinforces the structure of masonry materials?

a. mortar c. steel
b. cement d. CHB

5. Which has a formal appearance of bond pattern?

a. c.

b. d.

6. What does CHB stand for?

a. cement, hall, block c. concrete hollow block

b. code, housing, building d. none of the above

7. How many classifications of masonry tools are there?

a. 3 c. 5
b. 4 d. none of the above

8. Which contains information about certain services required for performance?

a. borrower‟s slip c. requisition slip
b. job order slip d. borrower and job slip

9. It contains an accepted form of request for tools, materials, and equipment on due time carries a provision for
default.
a. borrower’s slip c. requisition slip

1
 b. job order d. inventory slip

10. What is the importance of material management?

a. It provides the best service to the clientele.
b. It maximizes efficiency.
c. It helps in monitoring and managing inventories.
d. All of the above.

11. It is the condition to maintain high standard of good housekeeping where there is no dust and rust anywhere.
a. Sort c. Sweep
b. Systematize d. Sanitize

12. Which shall be used when an immediate hazard exists?

a. , c.

b. d.

Directions: identify the pictures below. Choose the correct answer. Write the letter of your answer on a separate sheet.

13.
a. Accident Prevention Tags
b. Directional Signs
c. Barricade
d. Flagmen

14.
a. Accident Prevention Tags
b. Directional Signs
c. Barricade
d. Flagmen

15.

a. Accident Prevention Tags

b. Directional Signs
c. Barricade
d. Flagmen

16. What government agency is responsible primarily for setting and enforcing mandatory occupational health and
safety standards through appropriate orders?
a. Department of Public Works and Highways
b. Civil Service Commission
c. Department of Labor and Employment
d. Department of Budget and Management

17. Which is a common hazard?

a. obstructions c. hazardous dusts
b. damaged saw blades d. Gaseous

18. Which is a risk?

a. Out-of-control cutting machine c. power cords
b. Vibration d. beard, loose hair, loose clothing

19. Which primarily uses least resources in the workplace?

a. Occupational Health & Safety
b. Risk Management

2
 c. Work Procedure
d. Work Simplification

20. Who are covered by the Occupational Health and Safety Regulations?
a. Employers c. Self-Employed
b. Workers d. All of the above

21. It is also called owner’s manual.

a. parts manual c. operator’s manual
b. service manual d. diagnostic manual

22. Is a type of manual where the part number and brief description are indicated.
a. operator c. service
b. part d. repair

23. Which is NOT included in an operator’s manual?

a. basic maintenance c. specification
b. safety information d. parts number

24. This refers to the descriptive characteristics or materials/tools.

a. specification c. data
b. version d. manual

25. This refers to the steps performing certain task.

a. procedure c. specification
b. instruction d. manual

26. Which is the most appropriate storage place for these manuals?
a. Box c. on top of the table
b. Cabinet d. anywhere

27. Why should manuals be kept properly?

a. They are expensive in terms of cost.
b. They are not easy to find.
c. They can be used for future reference.
d. All of the above.

28. It is a part of manual where explains to the readers what needs to be done first before they continue with the
manual.
a. Getting Started c. Warranty Information
b. Advanced Use d. Specifications

29. When is the detailed repair information added to the manual?

a. 18th Century c. 20th Century
b. 19th Century d. 21th Century

30. Why is it that this manual should be multilingual?

a. To encourage more customers.
b. To ensure that this is understood.
c. So that the same box product can be sold in many different markets.
d. To showcase the best of the products.

31. Which is an advantage of the proper use of tools and equipment?

a. Accuracy in job/task performance is achieved.
b. Shop efficiency is promoted.
c. There is high quality of work.
d. All of the above.

32. Which is the best way to keep the tools in perfect condition?
a. Keep them immediately without cleaning.
b. Clean them while they are in the tool cabinet.
c. Clean them before storage.
d. Place them in a bucket of water.

33. What is used as preventive maintenance for wooden tools?

a. Water c. Linseed oil
b. Kerosene. d. Muriatic acid

3
34. Why do we have to check frequently the hammers for signs of chipping, cracking or unusual signs of defects?
a. To assure that there are no missing tools.
b. To ensure that they are well classified.
c. To ensure that they are in perfect condition.
d. To maintain their price value

35. It is a detailed list of all the items in stock.

a. Delivery Receipt c. Inventory
b. List of Merchandise d. Directory

36. Which was created by virtue of Executive Order No. 307, on Nov. 1987?
a. Department of Labor and Employment
b. Office of the President
c. Department of Public Works and Highways
d. Occupational Safety and Health Center

37. If the distance of 2 posts is 5 meters, how many pieces of concrete hollow block are needed for two layers where
each CHB is 0.40 m?
a. 10 pcs. c. 25 pcs.
b. 12.5 pcs. d. 25.5 pcs.

38. Which tells us not only the magnitude but also the direction?
a. Mensuration c. Scalar quantity
b. Conversion d. Vector quantity

39. Which is used to measure length or distance, width, and height?

a. Pull-push-rule c. Spirit level
b. Tape measure d. Ruler

40. Which is the length of a CHB?

a. 16 ft c. 16 m
b. 16 in d. 16 cm

41. What is the area of this triangle?

2
a. 6m c. 6 inch 2
b. 6 m3 d. 6 inch 3

42. What is the area of this rectangular prism?

2
a. 3m c. 3 inch2
3
b. 3m d. 3 inch3

43. Which provides variation and charm in buildings?

a. Polygons c. Plane Figures
b. Sold Figures d. Shapes

44. Which has faces?

a. c.

b. d. all of the above

45. It has so many angles?

a. Polygon c. Plane Figure
b. Sold Figures d. Cone

46. It has a solid figure that has curved surfaces and can roll.
a. Plane Figure c. Sphere
b. Solid Figure d. Cone

4
Direction: Explain your answer on each question in 2-3 sentences for two (2) points.

47-48. What will happen if mortar is not cleaned?

_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
___________.

49-50. How could you avoid hazards above?

_________________________________________________________________________________________
_________________________________________________________________________________________
_________________________________________________________________________________________
___________.

“The secret of your success is determined by your hardwork and

strong focus on your GOAL”

5
 Republic of the Philippines
Department of Education
Region V
Division of Camarines Sur
Buelva Belleza Sipaco National High School
Sipaco, Lagonoy, Camarines Sur
S/Y 2022-2023

KEY TO CORRECTION OF DIAGNOSTIC TEST

FOR TLE 8 (MASONRY)
1. B 35. C
2. D 36. D
3. C 37. A
4. C 38. D
5. A 39. A
6. C 40. B
7. A 41. A
8. B 42. B
9. A 43. D
10. D 44. D
11. D 45. A
12. B 46. C
13. B 47. ESSAY
14. D 48. ESSAY
15. C 49. ESSAY
16. C 50. ESSAY
17. B
18. B
19. D
20. D
21. C
22. B
23. D
24. A
25. A
26. B
27. D
28. A
29. C
30. B
31. D
32. C
33. C
34. C

Prepared by: Reviewed by:

LOVELY D. ESPLANA JESSAE MAE C. SERCADO

Learning Support Aide Academic Coordinator

Noted by:

6
CONEY A. BERINGUELA
School Head