Scribd Logo
Upload

Welcome to Scribd!

  • 34 views

    Motec: Adl / Adl2

    Uploaded by

    Mohammed 216
    This document provides instructions for setting up pressure sensors with MoTeC data loggers and ECUs. It includes: - Pin assignments and connections for MoTeC ADL/ADL2/SDL data loggers and M800/M880/M4/M4-8 ECUs - Instructions for calibrating the pressure sensors using supplied calibration files - Guidelines for configuring sensor parameters like pressure range and analog-to-digital conversion values in the ECU software - Notes on specific pin connections and functions for the different ECU models

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Motec: Adl / Adl2

    Uploaded by

    Mohammed 216
    34 views1 page
    This document provides instructions for setting up pressure sensors with MoTeC data loggers and ECUs. It includes: - Pin assignments and connections for MoTeC ADL/ADL2/SDL data loggers and M800/M880/M4/M4-8 ECUs - Instructions for calibrating the pressure sensors using supplied calibration files - Guidelines for configuring sensor parameters like pressure range and analog-to-digital conversion values in the ECU software - Notes on specific pin connections and functions for the different ECU models

    Original Title

    X30-1 #53006 2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for setting up pressure sensors with MoTeC data loggers and ECUs. It includes: - Pin assignments and connections for MoTeC ADL/ADL2/SDL data loggers and M800/M880/M4/M4-8 ECUs - Instructions for calibrating the pressure sensors using supplied calibration files - Guidelines for configuring sensor parameters like pressure range and analog-to-digital conversion values in the ECU software - Notes on specific pin connections and functions for the different ECU models

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    34 views1 page

    Motec: Adl / Adl2

    Uploaded by

    Mohammed 216
    This document provides instructions for setting up pressure sensors with MoTeC data loggers and ECUs. It includes: - Pin assignments and connections for MoTeC ADL/ADL2/SDL data loggers and M800/M880/M4/M4-8 ECUs - Instructions for calibrating the pressure sensors using supplied calibration files - Guidelines for configuring sensor parameters like pressure range and analog-to-digital conversion values in the ECU software - Notes on specific pin connections and functions for the different ECU models

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    56mm Top view of sensor ADL / ADL2

    0V +5V Sensor 5V
    +5V
    0 0 Sig NOTE 1

    0
    1/8NPTF 0V Sensor 0V
    MoTeC 500KPA (75PSI Absolute Part Number 53006)
    Sig
    MoTeC Connector Part Number 65013
    SDL
    14
    +5V Sensor 5V
    ADL / ADL2 / SDL Setup NOTE 1:
    Channel Assignments + 5V Pins are 18, 28, 44 Sig NOTE 4
    Assign the pressure Channel to the appropriate pin 0V Pins are 17, 27, 33, 40, 43
    Sensor Calibration Analog Volt Input Pins are 1, 2, 3, 4, 5, 19, 20, 21, 22, 23, 37
    24, 25, 26, 45, 46, 47, 48, 49, 50 0V Sensor 0V
    Press "Select" and choose a calibration file that suits
    your needs. For example:
    TI 0-75 PSIA.C1P = PSI absolute calibration NOTE 2: M8 ECU
    M8 input pins are 28A, 27A, 13B & 16B 12A
    +5V 5V
    M4 and M4-8 input pins are 17 & 18
    Note: M800 Version 3.3 + software Use
    M800 / M880 / M8 Setup the ADL calibration method Sig NOTE 2
    NOTE 3: M800 M880
    Parameter Display as KPA as PSI as InHg
    Sensor Calibration -16 -22 -28 +5V ENG Pin A2 16 10A
    +5V AUX Pin A9 34 0V 0V
    0 Pressure AD Value 103
    Max Pressure AD Value 895 0V ENG Pin B16 27
    Use interpolate function to complete table values 0V AUX Pin B15 11 M4/ M4-8 ECU
    Analog Volt A15, A16, A17, A25 18, 6, 7, 12 +5V 4
    5V
    Input Pins B20, B21, B22 36, 35, 44
    M4 / M4-8 Setup (DISPLAY IN KPA)
    Parameter PIN MAP Aux Volt ** Sig NOTE 2
    NOTE 4:
    Sensor Calibration -1 -5 SDL AV input pins are 1,2,15,16,17,18,19,20
    0 Pressure AD Value 103 260 27
    0V 0V
    *Pressure / AD Value 500 / 895 400 / 895
    Use interpolate function to complete table values M800 / M880 ECU
    * AD values at higher pressures must increase by a
    value of 4. See the ECU help files for further +5V
    information.
    Sig NOTE 3
    ** Will not display vacuum readings
    0V

    TI PRESSURE SENSORS
    MoTeC
    Title Sheet No Drawing No

    Date 05/12/2006 Drawn ST App Products ADL, ECU 1 of 5 X30

    You might also like