Scribd
Upload
317 views3 pages

4 Bit Binary Adder

The document describes an experiment to implement a 4-bit parallel adder using the 7483 IC. It provides the aim, apparatus required, brief theory on 4-bit adders, pin configuration of the 7483 IC, logic diagram of the 4-bit parallel adder, observation table, procedure to apply different input combinations and verify the output, and precautions when performing the experiment.

Uploaded by

Nikita Pandey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
317 views3 pages

4 Bit Binary Adder

The document describes an experiment to implement a 4-bit parallel adder using the 7483 IC. It provides the aim, apparatus required, brief theory on 4-bit adders, pin configuration of the 7483 IC, logic diagram of the 4-bit parallel adder, observation table, procedure to apply different input combinations and verify the output, and precautions when performing the experiment.

Uploaded by

Nikita Pandey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

EXPERIMENT NO - 6

Aim – Implementation of 4-Bit Parallel Adder Using 7483 Ic.

APPRATUS REQUIRED – Digital trainer kit, IC 7483 (4-bit parallel adder).

BRIEF THEOR - A 4-bit adder is a circuit which adds two 4-bits numbers, say, A and B. In addition, a
4-bit adder will have another single-bit input which is added to the two numbers called the carry-in (Cin).
The output of the 4-bit adder is a 4-bit sum (S) and a carry-out (Cout) bit.

PIN CONFIGURATION–
Pin Diagram of IC 7483

IC 7483

LOGIC DIAGRAM:-

7483 4-bit Parallel Adder


OBSERVATION TABLE –
Truth table of 4-bit parallel adder
PROCEDURE –
a) Make the connections as per the logic diagram.
b) Connect +5v and ground according to pin configuration.
c) Apply diff combinations of inputs to the i/p terminals.
d) Note o/p for summation.
e) Verify the truth table.

RESULT- Binary 4-bit full adder is studied and verified.

PRECAUTIONS:
1. Make the connections according to the IC pin diagram.
2. The connections should be tight.
3. The Vcc and ground should be applied carefully at the specified pin only.

You might also like