Scribd
Upload
36 views

Pulse Code Modulation (PCM)

Pulse code modulation (PCM) is a digital representation of an analog signal where the signal is sampled, quantized, and encoded. In PCM, the message signal is represented as a sequence of coded pulses by sampling the signal at discrete time intervals and quantizing its amplitude levels. The basic elements of a PCM system include a low pass filter, sampler, quantizer, encoder at the transmitter and regenerative repeater, decoder, and reconstruction filter at the receiver. PCM converts an analog signal to a digital signal and back again, allowing analog signals to be transmitted over long distances.

Uploaded by

Narayana Sai Jawahar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
36 views

Pulse Code Modulation (PCM)

Pulse code modulation (PCM) is a digital representation of an analog signal where the signal is sampled, quantized, and encoded. In PCM, the message signal is represented as a sequence of coded pulses by sampling the signal at discrete time intervals and quantizing its amplitude levels. The basic elements of a PCM system include a low pass filter, sampler, quantizer, encoder at the transmitter and regenerative repeater, decoder, and reconstruction filter at the receiver. PCM converts an analog signal to a digital signal and back again, allowing analog signals to be transmitted over long distances.

Uploaded by

Narayana Sai Jawahar
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

4/8/2020 Pulse Code Modulation - Tutorialspoint

Pulse Code Modulation

Modulation is the process of varying one or more parameters of a carrier signal in accordance with
the instantaneous values of the message signal.
The message signal is the signal which is being transmitted for communication and the carrier signal is
a high frequency signal which has no data, but is used for long distance transmission.

There are many modulation techniques, which are classified according to the type of modulation
employed. Of them all, the digital modulation technique used is Pulse Code Modulation P
PCCM
M .

A signal is pulse code modulated to convert its analog information into a binary sequence, i.e., 1s and
0s. The output of a PCM will resemble a binary sequence. The following figure shows an example of
PCM output with respect to instantaneous values of a given sine wave.

Instead of a pulse train, PCM produces a series of numbers or digits, and hence this process is called
as digital. Each one of these digits, though in binary code, represent the approximate amplitude of the
signal sample at that instant.

In Pulse Code Modulation, the message signal is represented by a sequence of coded pulses. This
message signal is achieved by representing the signal in discrete form in both time and amplitude.

Basic Elements of PCM


The transmitter section of a Pulse Code Modulator circuit consists of Sampling, Quantizing and
Encoding, which are performed in the analog-to-digital converter section. The low pass filter prior to
sampling prevents aliasing of the message signal.
The basic operations in the receiver section are regeneration of impaired signals, decoding, and
reconstruction of the quantized pulse train. Following is the block diagram of PCM which represents
the basic elements of both the transmitter and the receiver sections.

https://www.tutorialspoint.com/digital_communication/digital_communication_pulse_code_modulation.htm 1/3
4/8/2020 Pulse Code Modulation - Tutorialspoint

Low Pass Filter

This filter eliminates the high frequency components present in the input analog signal which is greater
than the highest frequency of the message signal, to avoid aliasing of the message signal.

Sampler

This is the technique which helps to collect the sample data at instantaneous values of message
signal, so as to reconstruct the original signal. The sampling rate must be greater than twice the
highest frequency component W of the message signal, in accordance with the sampling theorem.

Quantizer

Quantizing is a process of reducing the excessive bits and confining the data. The sampled output
when given to Quantizer, reduces the redundant bits and compresses the value.

Encoder

The digitization of analog signal is done by the encoder. It designates each quantized level by a binary
code. The sampling done here is the sample-and-hold process. These three sections
L
LPPF
F ,, S
Saam
mpplle
err,, a
annd
dQQu
uaan
ntti
izze
err will act as an analog to digital converter. Encoding minimizes

the bandwidth used.

Regenerative Repeater

This section increases the signal strength. The output of the channel also has one regenerative
repeater circuit, to compensate the signal loss and reconstruct the signal, and also to increase its
strength.
https://www.tutorialspoint.com/digital_communication/digital_communication_pulse_code_modulation.htm 2/3
4/8/2020 Pulse Code Modulation - Tutorialspoint

Decoder

The decoder circuit decodes the pulse coded waveform to reproduce the original signal. This circuit
acts as the demodulator.

Reconstruction Filter

After the digital-to-analog conversion is done by the regenerative circuit and the decoder, a low-pass
filter is employed, called as the reconstruction filter to get back the original signal.

Hence, the Pulse Code Modulator circuit digitizes the given analog signal, codes it and samples it, and
then transmits it in an analog form. This whole process is repeated in a reverse pattern to obtain the
original signal.

https://www.tutorialspoint.com/digital_communication/digital_communication_pulse_code_modulation.htm 3/3

You might also like