Scribd
Upload
96 views6 pages

rs485 1m2s Extension Module Manual

The RS485-1M2S extension module extends the RS485 communication port of solar controllers and inverters. It has two main ports that connect to the solar equipment in parallel and two independent slave ports that connect to monitoring devices like meters or WiFi modules. The module uses standard Modbus protocol for communication and has LED lights to indicate status. An external power supply can power connected devices with high power consumption. The lightweight plastic enclosure has mounting holes for installation.

Uploaded by

krap
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
96 views6 pages

rs485 1m2s Extension Module Manual

The RS485-1M2S extension module extends the RS485 communication port of solar controllers and inverters. It has two main ports that connect to the solar equipment in parallel and two independent slave ports that connect to monitoring devices like meters or WiFi modules. The module uses standard Modbus protocol for communication and has LED lights to indicate status. An external power supply can power connected devices with high power consumption. The lightweight plastic enclosure has mounting holes for installation.

Uploaded by

krap
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Manuals+ — User Manuals Simplified.

EPEVER RS485-1M2S Extension Module User Manual

Home » EPEVER » EPEVER RS485-1M2S Extension Module User Manual

EPEVER RS485-1M2S Extension Module User Manual

※ Thank you for choosing the RS485-1M2S extension module.


※ Please read this manual carefully before using the product.

Contents
1 Overview
2 Appearance
3 Pin definition for the RS485 communication
port
4 Accessories
5 Connection Diagram
6 Specifications
7 Dimensions
8 Documents / Resources
8.1 References
9 Related Posts
Overview

The RS485-1M2S extension module is an optional accessory that can extend the RS485 communication port of
our solar controller/inverter. Based on the standard Modbus protocol, the user can monitor the operating status
and set parameters through the monitoring devices connected to the RS485-1M2S extension module. The
RS485-1M2S main port 1-1 and 1-2 are connected in parallel, which can connect 1 or 2 slave devices, such as a
solar controller/inverter. And the RS485-1M2S slave port 2 and 3 are independent, which can connect 1 or 2
monitoring devices at the same time, such as remote meter/WIFI module/Bluetooth module/PC software, etc.

Features:

Extend the RS485 communication port of the solar controller/inverter


Data interaction between the solar controller/inverter and monitoring devices
Standard Modbus communication protocol
One key to set the communication baud rate
LED screen

Appearance

1. Communication status Indicator


Green ON solid — RS485-1M2S standby Green flashing — RS485-1M2S communicating Red flashing —
RS485-1M2S baud rate setting
2. Mounting Hole 2-φ4.8mm
3. Power Indicator
Green ON solid –Power supply normal
4. RS485 slave port 2 (RJ45)
5. RS485 slave port 3 (RJ45)
Port ④ and ⑤ are independent, which can connect monitoring devices such as remote meter/WIFI
module/Bluetooth module/PC software etc.
6. Set button
9600 – Communication status red indicator flashes once 115200-Communication status red indicator flashes
twice Long press the Set button to set the communication baud rate of RS485- 1M2S, which is consistent with
the communication baud rate of the connected controller/inverter.
7. Auxiliary port for external power(5.08-2P)
DC power range: DC 8-70V DC power source: Battery
Function: When the power consumption of the external monitoring device is large, an external power
connected to the auxiliary port can be used to power the device. Detail scenarios are as follows.

Scenario Device (main port) Device (slave port) External power

Only controller/ only inv MT75+WIFI/ BlueTooth+WIFI/ eLog+


1 Yes
erter WIFI

MT75+WIFI/ BlueTooth+WIFI/ eLog+


2 Controller + inverte No
WIFI

Only controller/ only inv


3 erter/ controller + invert MT75/BlueTooth/ eLog/WIFI No
er

8. RS485 main port 1-1(RJ45)


RS485 main port 1-2(RJ45)
Port ⑧ and ⑨ are connected in parallel, which extend the RS485 communication port by connecting the solar
controller/inverter.

Pin definition for the RS485 communication port

RJ45

1/2 5VDC

3/4 RS485-B

5/6 RS485-A

7/8 GND

Accessories

RS485 cable(length: 1.5m) Model: CC-RS485-R


2 pcs
Included Accessories S485-150U

5.08-2P terminal 1 pcs

RS485 adapter(length: 1.5m) Model: CC-USB-R


Optional Accessories 1 pcs
S485-150U

Connection Diagram
Note: When the power consumption of the external monitoring device is large, an external power connected to
the auxiliary port can be used to power the device.

Specifications

Model RS485-1M2S

Compatible products Solar controller/inverter

5VDC (Power supply by the communication port of sol


Power supply
ar controller/inverter)

Auxiliary power supply 8~70VDC (Auxiliary power supply by the battery)

Power consumption 0.3W

Communication baud rate 115200 (Default) 9600

Working environment temperature 30℃ 50℃

Storage temperature -30℃ 80℃

Enclosure IP30

Dimension 121* 88* 27.5mm

Mounting dimension 69mm

Mounting hole size Φ4.8

Net Weight 121.8g

Dimensions

Any changes without prior notice!


Version number: V1.1

HUIZHOU EPEVER TECHNOLOGY CO., LTD


TEL: 010-82894896/82894112/0752-3889706
Website: www.epever.com.cn

Documents / Resources

EPEVER RS485-1M2S Extension Module [pdf] User Manual


RS485-1M2S Extension Module, RS485-1M2S, Extension Module, Module

References
-
Home - EPEVER

Manuals+,

You might also like