TLE ELECTRICITY GRADE 8

SUMMATIVE TEST
NAME__________________________________YEAR AND SECTION __________________SCORE___________

TEST I. Identification. Identify the following by writing the letter only.

1.____ a. Wire gauge b. Micrometer c. Ohmmeter d. Ammeter

2..____ a. Wire gauge b. Micrometer c. Ohmmeter d. Ammeter

3. .____ a. pliers b. hammer c. screwdriver d. electric drill

4. .____ a. pliers b. hammer c. screwdriver d. electric drill

5..____ a. pliers b. hammer c. screwdriver d. electric drill

6..____ a. battery b. switch c. speaker d. cell

7. .____ a. battery b. switch c. speaker d. cell

8..____ a. battery b. switch c. speaker d. cell

9. .____ a. voltmeter b. ammeter c. wattmeter d. galvanometer

10. .____ a. battery b. switch c. speaker d. cell

11. .____ a. chemical b. biological c. physical d. psychological

12..____

a. chemical b. biological c. physical d. psychological

14. .____ a. chemical b. biological c. physical d. psychological

15. .____ a. goggles b. respirator c. apron d. gloves

TEST II. MULTIPLE CHOICES. Read very carefully and choose the best answer.
1. An instrument used to measure the amount of electrical current intensity in a circuit
a. Voltmeter b . Ammeter c. Micrometer d. Ohmmeter
2. These tools are made from metal with insulators in the handle and are used for
cutting, twisting, bending, holding, and gripping wires and cables
a. pliers b. hammer c. screwdriver d. electric drill
3. A measuring tool used to measure the length of an object in centimeter and inches.
a. Test light b. Wire gauge c. Ruler d. Pull-push rule
4. These tools are made of steel hardened and tempered at the tip used to loosen or tighten screws with slotted
heads.
a. pliers b. hammer c. screwdriver d. electric drill
6. The raw materials, work-in-process goods and completely finished goods that are considered to be the portion of a
business's assets that are ready or will be ready for sale
a. Inventory of Materials Form b. Requisition Slip Form c. Job Order/ Work Order For d. Borrowers Form
7. A written instruction to perform a work according to specified requirements, within specified timeframe and cost
estimates.
a. Inventory of Materials Form b. Requisition Slip Form c. Job Order/ Work Order Form d. Borrowers
Form
8. A pocket sized tool used to test the line wire or circuit if there is current in it.
a. Test light b. Wire gauge c. Ruler d. Pull-push rule
9. It is used to measure the diameter of wires/conductors in circular mils. It can measure small and big sizes of wires
and cables
a. Voltmeter b. Ammeter c. Micrometer d. Ohmmeter
10. A form use to request for tools and equipment to be used for a particular job A written instruction to perform a work
a. Inventory of Materials Form b. Requisition Slip Form c . Job Order/ Work Order Form d. Borrowers Form
11. A sketch of electrical circuit that shows the external appearance of each component. It is much like a
photograph of the circuit and uses simple images of parts.
a. Schematic diagram b. Pictorial diagram c. Plane diagram d. Series diagram
12 . 1 inch is equivalent to how many centimeters?
a. 1.54cm b. 2.54cm c. 3.54cm d. 4.54cm
13 . How many inches are there in a yard?
a. 12 inches b. 24 inches c. 36 inches d. 48 inches
14. Include bacteria, viruses, insects, plants, birds, animals, and humans.
a. biological hazard b. psychological hazard c. mechanical hazard d. physical hazard
15. Stress like headaches, anxiety and impatience is a ___________.
a. biological hazard b. psychological hazard c. mechanical hazard d. physical hazard
16. Liquids such as cleansers, acids, and paints
a. Chemical hazard b. psychological hazard c. mechanical hazard d. physical hazard
17. Trip and fall hazards
a. chemical hazard b. biological hazard c. mechanical hazard d. physical hazard
18. A circuit in which lamps are arranged in a chain, so that the current has only one path to take.
a. series circuit b. parallel circuit c. plane circuit d. schematic circuit
19. The chance or probability that a person will be harmed or experience an adverse
health effect once to a hazard.
a. risk b. hazard c. warning d. danger
20. Changing a piece of machinery (for example, using proper machine guards) or a work process to reduce exposure to a
hazard.

a. Administrative Control b. Engineering Control c. Substitution d. Eliminate the Hazard

_________ 1. Micrometer is used to measure the voltage, resistance and current of a circuit. It connected in parallel
or series with the circuit depending on what to measure.

__________2. You make a copy do with the copy of your request for inspection
__________3. An instrument used to measure resistance in ohms is voltmeter.
__________4. Electrical measuring tools and instruments are sensitive and delicate so extra care is necessary in
handling them

__________5. Metric system is a decimalized system of measurement

__________6. Danger means that any activity stated by the symbol is not allowed.

__________7. a sketch of electrical circuit that shows the external appearance of each component is Schematic
diagram.

__________8. Pneumatic tools are tools or instruments activated by air pressure.

__________ 9. An action to clean your work place thoroughly so that there is no dust on floor, machines
and equipment is sorting.

__________10. Risk assessment is the process where you identify hazards

__________ 13.Good housekeeping reduces the risk of fire and is cost-effective.

__________ 14. Safety signs are a method of hazard control.

__________ 15. Hygiene (cleanliness) is not as important as a method of controlling hazards.