0% found this document useful (0 votes)
439 views2 pages

T800S Technical Data Sheet 1 PDF

This document summarizes an intermediate modulus carbon fiber called T800S. It has excellent tensile composite properties and is designed for weight savings in aircraft and recreational products. It can be manufactured using traditional methods like weaving, braiding, and prepreg. Production locations include Japan, the US, and France. It has high tensile strength and modulus yet is more affordable than other carbon fibers.

Uploaded by

Amal Av
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
439 views2 pages

T800S Technical Data Sheet 1 PDF

This document summarizes an intermediate modulus carbon fiber called T800S. It has excellent tensile composite properties and is designed for weight savings in aircraft and recreational products. It can be manufactured using traditional methods like weaving, braiding, and prepreg. Production locations include Japan, the US, and France. It has high tensile strength and modulus yet is more affordable than other carbon fibers.

Uploaded by

Amal Av
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Intermediate modulus, high tensile strength fiber, devel-

oped as a cost effective alternative to T800H. This never


twisted fiber has excellent tensile composite properties
and is specifically designed to meet the weight saving
demand of aircraft and high performance recreational
products. Excellent processability in traditional manu-
INTERMEDIATE MODULUS facturing methods (weaving, braiding, filament wind-
CARBON FIBER ing, prepreg, etc). Manufacturing locations include Ja-
pan, US, and France.

PRODUCT DESIGNATION RESIN SYSTEM COMPATIBILITY


T800S C 24,000 1 0 E SIZING TYPE
RESIN SYSTEM COMPATIBILITY METHOD
Filament Sizing Surface Sizing & AMOUNT
Fiber Type Twist* Count Type Treatment Amount 10E (0.5%) Epoxy TY-030B-05

* C: Never twisted 50C (1.0%) Epoxy, phenolic, polyester, vinyl ester TY-030B-05

FIBER PROPERTIES COMPOSITE PROPERTIES


PROPERTY ENGLISH METRIC METHOD PROPERTY ENGLISH METRIC METHOD
Tensile Strength 853 ksi 5,880 MPa TY-030B-01 Tensile Strength* 477 ksi 3,290 MPa ASTM D-3039
Tensile Modulus 42.7 Msi 294 GPa TY-030B-01 Tensile Modulus* 24 Msi 163 GPa ASTM D-3039
Strain at Failure 2.0% TY-030B-01 Tensile Strain 1.94% ASTM D-3039
Density 1.80 g/cm3 TY-030B-02 Compressive Strength* 216 ksi 1,490 MPa SACMASRM1R-94
Filament Diameter 5 μm Flexural Strength* 247 ksi 1,700 MPa ASTM D-790
Yield 12K 515 g/1000m TY-030B-03 Flexural Modulus* 21 Msi 145 GPa ASTM D-790
24K 1,030 g /1000m TY-030B-03 ILSS 13 ksi 87.9 MPa SACMASRM1R-94
In Plain Shear Strength 20 ksi 135 MPa ASTM D-3518
FUNCTIONAL PROPERTIES 90° Tensile Strength 11 ksi 79 MPa ASTM D-3039
PROPERTY VALUE
CTE -0.4 α ·10 -6 /°C *Normalized to 60% fiber volume. Cured with #2592 epoxy at 130 °C.

Specific Heat 0.740 J/g ·°C


Thermal Conductivity 0.113 J/cm ·s·°C
Electric Resistivity 1.3 x 10-3 Ω·cm
Chemical Composition: Carbon >96%
Na + K <50 ppm

www.toraycma.com
T800S 253-846-1777
T800S Rev. 1: Updated April 13, 2018
T800S

PACKAGING
The table below summarizes the tow sizes, twists, sizing types, and packaging available for standard material.
Other bobbin sizes may be available on a limited basis.

BOBBIN NET BOBBIN BOBBIN SIZE (mm) SPOOL PER CASE NET
TOW SIZES SIZING
WEIGHT (kg) TYPE a b c d e CASE WEIGHT (kg)
12K 50C 4.0 III 76.5 82.5 280 160 252 6 24
24K 10E 7.8 III 76.5 82.5 280 198 252 4 31.2

Bobbin Type:

Type III

d b a

e
c

Please refer to SDS for handling and disposal.

For more information or pucr hasing inquiries:

The data listed herein are lot averages and for reference purposes only. The results are not intended for specification purposes. These commodities, technology or software were exported fro
the United States in accordance with the Export Administration Regulations. Diversion contrary to U.S. law is prohibited.

You might also like