ACR10RH

ACR10RH
General

The guide-rail harmonic meter with external roche coil and open type mutual inductor is suitable for energy saving
renovation projects in high energy consumption industries such as smelting,steel,electric welding,semiconductor,etc.And
also for power monitoring of distributed photovoltaic grid-connected cabinet,power demand side management and other
applications.The utility model has the advantages of no need to remove primary bus,simple and convenient wiring,safe
construction,saving transformation cost and improving efficiency for users.It integrates the measurement of all power
parameters(such as current,voltage,active power,reactive power,apparent power,frequency,power factor,etc.),multi-rate
electric energy measurement,four-quadrant electric energy measurement,harmonic analysis and electric energy monitoring
and assessment management.At the same time, it has a variety of peripheral interface for user to choose:with RS485
communication interface,modbus-rtu protocol can meet the needs of communication network management;The function of
“remote signal” and “remote control” of circuit breaker switch can be realized with switch quantity input and relay output.LCD
display interface is adoped to realize parameter setting and control through panel keys,which is very suitable for real-time
power monitoring system.

Model Description
ACR 10R H - / -

No-AC/DC 85-270V P1-DC24V,48V

J-Relay alarm output over limit K-Switch input/output(I/O module)
D-Maximum demand F-Multiple rate electric energy
SOE-Incident record
E3-three-phase,three-wire E4-three-phase,four-wire

T-External opening transforme R-External Roche coil

Open type transformer model ：

D10-Φ10mm ，80A;D16-Φ16mm
D24-Φ24mm， 200A;D36-Φ36mm ，300A
Roche coil model ：
D110-Φ110mm， 1000A;D120-Φ120mm，2000A
D140-Φ140mm，6300A;D190-Φ190mm，20000A

H-Harmonic measurement
10R-Guide rail installation
ACR series netxork power instrument

Function

Model ACR10RH-DxxT(R)E4
Function ACR10RH-DxxT(R)E3

Display mode LCD（Field LCD） ■

Current/voltage/frequency/power facto ■

Active power/reactive power/apparent power ■

Measuring
Four quadrant electric energy measurement ■
parameter
Maximum demand □

Multiple rate electric energy measurement □

Power quality Total harmonic content ■

monitoring
subharmonic（2-31 times） ■

Data logging Incident record □

Installation and operation instruction

-01-
 ACR10RH

Model ACR10RH-DxxT(R)E4
Function ACR10RH-DxxT(R)E3
Alarm □
Display mode
Built-in clock □

Communication RS485 interface ■

J（2DO）
A1+（B1 or C1）
Optional function
K（4DI）
(choose one) (4DI+2DO or 4DI+EP)*
pulse（2channels）

Note:1、“■”is standard allocation function，“□”is matching function，Above instrument stanfard 1 channel RS485 communication；
2、Terminal connection mode corresponding to A1/B1/C1 and so on in selection function；
3、Pulse output and relay output can not be selected at the same time;
4、When you select an event loggong feature,you must configure the DI or DO

Technical parameter

Technical parameters Indicators

Net work 3-phase 3-wire,3-phase 4 wire

Frequency 45～65Hz

Rating：AC 57.7V/100V(100V)、220V/380V(400V)

Voltage Overload:1.2-fold rating(continuous);2-fold rating/1second

Input Consumption:<0.2VA

Rating： 80A，120A，200A .etc（See specific product specifications,special parameters

can be customized）
Current
Overload:1.2-fold rating(continuous);10-fold rating/1 second

Consumption:＜ 0.2VA

Output mode:Open-collector photocoupler pulse,two way output

Electric energy
Three-phase Pulse constant:4000、8000imp/kWh
Output
Communication RS485 interface,Modbus-RTU Protocol

Display mode LCD

Input Four way dry contact input

Function Switching Output mode: two way relay nO contact output

Output
Contact capacity：AC 250V/3A、DC 30V/3A

Measuring accuracy Frequency0.05Hz、reactive electric energy1class、other 0.5class

AC85～265V or DC100～350V；DC24V（±10%）；DC48V（±10%）
Power supply
Consumption≤10VA

Power frequency withstand voltage between Auxiliary power and switch volume output and

current input and voltage input and communication and pulse output and switch volume input

terminal is AC2kV 1min；Power frequency withstand voltage between auxiliary power and
Power-frequency withstand voltage
Safety switch volume output and current input voltage input terminal is AC 2kV/1min;Power

frequency withstand voltage between communication and pulse output and switch volume

input terminal is AC 1kV/1min;

Insulation resistance Input,Output terminal to housing>100MΩ

Working temperature：-10℃～+55℃；Storage temperature：-20℃～+70℃

Environment
Relative humidity：5%～95% No condensation；Altitude：≤2500m

-02- Installation and operation instruction

 ACR10RH

Dimension

54

53

65
35.5
53
85

29
64 50
64

Wiring

UA UB UC UN I A* I A I B* I B I C* I C UA UB UC UN I A* I A I B* I B I C* I C L N
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
* * * * * * 12 13
FUSES FUSES
FUSE

L
A S1 * S2 A S1 * S2 N
B B
S1 * S2 S1 * S2
C C
S1 * S2 S1 * S2
N N
3-phase,4-wire 3CT 3-phase,4-wire 3PT、3CT Accessory power

UA UB U C UN I A* I A I B* I B I C* I C U A UB UC UN I A* I A I B* I B I C* I C
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
* * * * * *
FUSES FUSES 21 22

A S1 * S2
A S1 * S2
A B
B B
C C
S1 * S2 S1 * S2
RS485 communication
3-phase,3-wire 2CT 3-phase,4-wire 2PT、2CT

A1
24 25 26 27 28 Note: It is a test terminal for CT secondary side short coonnection.
A DI1 DI2 DI3 DI4
When three-phase three-wire connection is made,no.2 terminal and no.4 terminal shall be externally
Switch input (4DI)

B1 connected together
34 35 36 The fuse in the wiring diagram is recommended 0.5A or 3A.
B DO1
DO2
When the instrument is installed on site,it must correspond to the supporing open and closed
Switch output(2DO)

C1 transformer or roche coil one by one,otherwise the measurement accuracy will be affected,and the
17 18 19 connection between the two must be reliable.
C Ep
+ +
Eq E-
2 pulse (2EP)

-03- Installation and operation instruction

 ACR10RH

Operation

The five keys of the instrument from left to right are:FN、SET、▲、 、ENTER。

▲
FN button The button function is not open yet

Under measuring mode，press this key to enter the setting interface;

SET button
Under programming mode,this button is used for return to previous menu;

Under measuring mode,press this button can page up the display items，see the display menu for related
parameters；
Under programming mode，used to toggle peer menus or single digit reductions。

Under measuring mode,press this button can page down the display items，see the display menu for related
parameters；
Under programming mode,used to toggle peer menus or single digit increments。

Enter button Under programming mode,this button is used for confirming selection of menu item and revision of parameter

-04- Installation and operation instruction