RFQ - 84 - 1 (Batco)

Download as pdf or txt
Download as pdf or txt
You are on page 1of 1

SOW Bank Saudi Fransi project

Scope of work:
1) The Price of Professional services for ATM is fixed but for buildings are depends on number of
CCTVs & NVRs.
2) The price of Professional services for CCTV include:
 Suppling and Installation of conduits, EMT/PVC Pipes, Coupling, Bends, Connectors,
Boxes and any required accessories and refer to general/STCS passive standers until
be accepted by the customer
 Follow / Understand the High Level Design, Low Level design, Configuration
Template and other related technical document provided by STCS technical team
and agreed with customer.
 Filling the project documents templates (sites design, As Built, NRFUs,
acceptance/dismantling forms, etc.) based on STCS & Client provided standers.
 Installation the required type & number of CCTVs based on the agreed BOQ, design
and list of distribution, with camera alignment, adding SD-card, fine-tuning,
focusing, Labelling.
 Doing the required configuration, alignment, testing and commissioning until be
accepted by the customer.
 Dismantling the previous CCTVs after getting the customer approval and deliver
them to the customer HQ.
3) The Price of "Professional services for NVRs" include Networking and integration of intrusion
system amount.
4) The Price of "Professional services for NVRs" include:
o Filling the project documents (design, NRFUs, acceptance/dismantling forms, … etc).
o Installation the required type & number of NVRs & Network devices based on the agreed
BOQ, design and list of distribution, with Racking & Stacking, cabling and Labelling.
o Provide remote access for STCS/BSF Technical team of configuration support when
required for any of Branch / ATM site.
o Doing the required configuration for installed devices, integration, testing and
commissioning until being accepted by the customer.
o Dismantling the previous NVRs/DVRs/Network devices after getting get the customer
approval and deliver them to the customer HQ.
Notes:
 Follow the vendor standers during devices installation, dismantling or operating.
 Refer to approved design documents while doing work.
 The invoicing based on the customer acceptance & solutions by stc operation manager.
 The uniform (T-shirt, gray color with solution by stc logo) is required for whole team that
working with the customer.
 The team must adhere while dealing with customer and also their visitors/customers as well
and should be careful for cleaning after completing the work.
 The operation or managed services for 5 years is contractor responsibility after completing
the implementation but this BOQ not including operation value which will be quoted
separately.

You might also like