J40UM

Download as pdf or txt
Download as pdf or txt
You are on page 1of 8

Industrial Diesel Generator Set – J40UM

60 Hz

RATINGS 240 V - 60 Hz
Standby kVA 39
kWe 39
Prime kVA 35,50
kWe 35,50

Benefits & features GENERAL SPECIFICATIONS

KOHLER premium quality Engine brand JOHN DEERE


 Design offices using the latest technical innovations Alternator commercial brand KOHLER
 Modern fully certified factories Voltage (V) 240 single phase
 A cutting edge laboratory Standard Control Panel APM303
 The generating set, its components and a wide range of options
Optional control panel APM403
have been fully developed, prototype tested, factory built, and
production tested Consumption @ 100% load ESP (L/h) 13
 Approved for use with HVO (Hydrotreated Vegetable Oil) Consumption @ 100% load PRP (L/h) 12
according to EN15940 Emission level Fuel consumption optimization
KOHLER premium performances Type of Cooling Mechanical driven fan
 Optimized and certified sound levels
 Reliable power, even in extreme conditions Performance class G3
 Optimized fuel consumption
 Compact footprint
GENERATOR SETS RATINGS
 Best quality of electricity, high starting and loading capacity,
according to ISO8528-5
 Robust base frames and high-quality enclosures
 Protection of installations and people Standby Rating Prime Rating
 Approved in line with the most stringent standards Voltage PH Hz kWe kVA Amps kWe kVA
Engines J40UM 240 MONO-BI 1 60 39 39 162 35,50 35,50
 Premium level engines, in-house or from strong partners
 High power density, small footprint DIMENSIONS COMPACT VERSION
 Low temperature starting capability Length (mm) 1700
 Long maintenance interval Width (mm) 896
Alternator
 Provide industry leading motor starting capability Height (mm) 1243
 Made in Europe Tank capacity (L) 100
 Built with a class H insulation and IP23
Dry weight (kg) 694
Cooling
 A compact and complete solution using a mechanically driven DIMENSIONS SOUNDPROOFED VERSION NA
radiator fan Type soundproofing NOT AVAILABLE
 Designed or optimized by KOHLER
 High temperature and altitude product capacity available Length (mm) 2100
Base frame and enclosure Width (mm) 938
 High quality steel with enhanced corrosion resistance Height (mm) 1285
 Highly durable QUALICOAT-certified epoxy paint Tank capacity (L) 100
 Minimum 1000 hours of resistance to salt spray in accordance
Dry weight (kg) 882
with ISO12944
 Ergonomic access to allow easy maintenance and Acoustic pressure level @1m in dB(A) 60Hz
80
connection of the generator (100% PRP)
 Robust design optimized for transportation Acoustic pressure level @7m in dB(A) 60Hz
70
(100% PRP)

Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit; Fuel density at 0.85 kg/L.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
Industrial Diesel Generator Set – J40UM
60 Hz
Engine

General Lubrication System


Engine brand JOHN DEERE Oil system capacity including filters (l) 6
Engine ref. 3029TSG20 * Min. oil pressure (bar) 1
Air inlet system Turbo Max. oil pressure (bar) 5
Fuel Diesel Fuel/HVO Oil sump capacity (l) 5,30
Fuel consumption Oil consumption 100% ESP 60Hz (l/h) 0,0320
Emission level
optimization
Cylinder configuration L Air Intake system

Number of cylinders 3 Max. intake restriction (mm H2O) 300

Displacement (l) 2,91 Combustion air flow (l/s) 48,60

Bore (mm) * Stroke (mm) 106 * 110 Exhaust system

Compression ratio 17.2 : 1 PRP ESP

Speed (RPM) 1800 Exhaust gas temperature (°C) 517


Maximum stand-by power at rated RPM 60Hz Exhaust gas flow (L/s) 138
48
(kW) Max. exhaust back pressure (mm H2O) 625
Frequency regulation, steady state (%) +/- 2.5%
Cooling system
Injection Type Direct
Radiator & Engine capacity (l) 16,10
Governor type Mechanical
Fan power 60Hz (kW) 2,20
Air cleaner type, models Dry
Fan air flow w/o restriction (m3/s) 2,34
Fuel system
Available restriction on air flow (mm H2O) 20
Maximum fuel pump flow 60Hz (l/h) 108
Type of coolant Glycol-Ethylene
Max head on fuel return line (m fuel) 3,60
Radiated heat to ambiant (kW) 5
Consumption with cooling system
Heat rejection to coolant HT (kW) 28
Fuel consumption @ ESP Max Power 60Hz (l/h) 12,60
Outlet coolant temperature (°C) 93
Fuel consumption @ PRP Max Power 60Hz (l/h) 11,70
Max coolant temperature, Shutdown (°C) 105
Fuel consumption @ 75% of PRP Power 60Hz
9,20
(l/h) Thermostat begin of opening HT (°C) 82
Fuel consumption @ 50% of PRP Power 60Hz
6,50 Thermostat end of opening HT (°C) 94
(l/h)
Cooling system and charge air cooler
Radiator & Engine capacity (l) 16,10
Fan power 60Hz (kW) 2,20
Fan air flow w/o restriction (m3/s) 2,34
Available restriction on air flow (mm H2O) 20
Type of coolant Glycol-Ethylene
Radiated heat to ambiant (kW) 5
Heat rejection to coolant HT (kW) 28
Coolant capacity HT, engine only (l)
Outlet coolant temperature (°C) 93
Max coolant temperature, Shutdown (°C) 105
Max. pressure at inlet of HT water pump (mbar)
Thermostat begin of opening HT (°C) 82
Thermostat end of opening HT (°C) 94
CAC Heat Rejection (kW)
Cooling system (HT/LT)
Radiator & Engine capacity (l) 16,10
Fan power 60Hz (kW) 2,20
Fan air flow w/o restriction (m3/s) 2,34

Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit; Fuel density at 0.85 kg/L.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
Industrial Diesel Generator Set – J40UM
60 Hz
Available restriction on air flow (mm H2O) 20
Type of coolant Glycol-Ethylene
Radiated heat to ambiant (kW) 5
Heat rejection to coolant HT (kW) 28
Coolant capacity HT, engine only (l)
Outlet coolant temperature (°C) 93
Max coolant temperature, Shutdown (°C) 105
Max. pressure at inlet of HT water pump (mbar)
Thermostat begin of opening HT (°C) 82
Thermostat end of opening HT (°C) 94
Heat rejection to coolant BT (kW)
LT circuit flow rate (l/min)
Coolant capacity LT, engine only (l)

* Engine reference may be partially modified depending on genset


application, options selected by the customer and lead time required.

Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit; Fuel density at 0.85 kg/L.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
Industrial Diesel Generator Set – J40UM
60 Hz
Alternator Specifications Alternator Standard Features
Alternator commercial brand KOHLER - All models are brushless, rotating-field alternators
Kohler Alternator description KH00810TN4N
- NEMA MG1, IEEE, and ANSI standards compliance for
Number of pole 4
temperature rise and motor starting
Number of bearing Single Bearing
Technology Brushless
- The AVR voltage regulator provides superior short
circuit capability
Indication of protection IP23
Insulation class H - Self-ventilated and dip proof construction
Number of wires 12 - Superior voltage waveform
AVR Regulation Yes
Note: See Alternator Data Sheets for alternator application data
Coupling Direct and ratings, efficiency curves, voltage dip with motor starting
Capacity for maintaining short circuit curves, and short circuit decrement curves.
No
at 300% of rated current for 10 s
Application data
Overspeed (rpm) 2250
Power factor (Cos Phi) 1
Voltage regulation at established
0,50
rating (+/- %)
Wave form : NEMA=TIF <50
Wave form : CEI=FHT <2
Total Harmonic Distortion in no-load
<2
DHT (%)
Total Harmonic Distortion, on linear
<4
load DHT (%)
Recovery time (Delta U = 20%
500
transcient) (ms)
Performance datas
Continuous Nominal Rating 40°C
39
(kVA)
Unbalanced load acceptance ratio
8
(%)
Peak motor starting (kVA) based on x% voltage dip power factor at 0.3

Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit; Fuel density at 0.85 kg/L.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
Industrial Diesel Generator Set – J40UM
60 Hz

Dimensions compact version

Length (mm) * Width (mm) * Height (mm) 1700 * 896 * 1243


Dry weight (kg) 694
Tank capacity (L) 100

M137 - Dimensions soundproofed version

Length (mm) * Width (mm) * Height (mm) 2100 * 938 * 1285


Dry weight (kg) 882
Tank capacity (L) 100
Acoustic pressure level @1m in dB(A) 60Hz (100% PRP) 80
Acoustic pressure level @7m in dB(A) 60Hz (100% PRP) 70

Dimensions DW compact version

Length (mm) * Width (mm) * Height (mm) 2074 * 932 * 1444


Dry weight (kg) 902
Tank capacity (L) 240

M137 - Dimensions DW soundproofed version

Length (mm) * Width (mm) * Height (mm) 2100 * 938 * 1486


Dry weight (kg) 1090
Tank capacity (L) 240
Acoustic pressure level @1m in dB(A) 60Hz (100% PRP) 80
Acoustic pressure level @7m in dB(A) 60Hz (100% PRP) 70

M137 - Dimensions DW 48h soundproofed version

Length (mm) * Width (mm) * Height (mm) 2100 * 938 * 1540


Dry weight (kg) 1102
Tank capacity (L) 470
Acoustic pressure level @1m in dB(A) 60Hz (100% PRP) 80
Acoustic pressure level @7m in dB(A) 60Hz (100% PRP) 70

Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit; Fuel density at 0.85 kg/L.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
Industrial Diesel Generator Set – J40UM
60 Hz

The APM303 is a versatile unit which can be operated in manual or automatic


APM303 mode. It offers the following features:
- Measurements: phase-to-neutral and phase-to-phase voltages, fuel
level (In option : active power currents, effective power, power factors,
Kw/h energy meter, oil pressure and coolant temperature levels)
- Supervision: Modbus RTU communication on RS485
- Reports: (In option : 2 configurable reports)
- Safety features: Overspeed, oil pressure, coolant temperatures,
minimum and maximum voltage, minimum and maximum frequency
(Maximum active power P<66kVA)
- Traceability: Stack of 12 stored events
For further information, please refer to the data sheet for the APM303

BASIC GENERATING SET AND POWER PLANT CONTROL


The APM403 is a versatile control unit which allows operation in manual or
APM403 automatic mode
- Measurements : voltage and current
- kW/kWh/kVA power meters
- Standard specifications: Voltmeter, Frequency meter.
- Optional : Battery ammeter.
- J1939 CAN ECU engine control
- Alarms and faults: Oil pressure, Coolant temperature, Overspeed, Start-
up failure, alternator min/max, Emergency stop button.
- Engine parameters: Fuel level, hour counter, battery voltage.
- Optional (standard at 24V): Oil pressure, water temperature.
- Event log/ Management of the last 300 genset events.
- Mains and genset protection
- Clock management
- USB connections, USB Host and PC,
- Communications : RS485 INTERFACE
- ModBUS protocol /SNMP
- Optional : Ethernet, GPRS, remote control, 3G, 4G,
- Websupervisor, SMS, E-mails

Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit; Fuel density at 0.85 kg/L.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
Industrial Diesel Generator Set – J40UM
60 Hz

STANDARD SCOPE OF SUPPLY


All our gensets are fitted with:

- Industrial water cooled DIESEL engine


- Electric starter & charge alternator
- Standard air filter
- Schneider or ABB electric circuit breaker, adapted to the short-circuit current of the generating set
- Single bearing alternator IP 23 T° rise/ insulation to class H/H
- Welded steel base frame with 85% vibration attenuation mounts
- 4 lifting points on the chassis, lifting bar on the top included from 165 kVA ESP or optional
- highly durable QUALICOAT certified epoxy paint
- frame height optimized to allow it to be moved safely by forklift
- enclosure made of new high-quality European steel with enhanced corrosion resistance
- IP 64 locks, made from stainless materials
- enclosures and base frames tested and analyzed by the French Corrosion Institut
- 100% of tanks tested for permeability
- Personal protection ensured by protective grilles on hot and rotating parts
- Separate 9 dB(A) silencer
- Fuel tank welded inside the genset frame
- Retention bund included for gensets up to 110 kVA ESP
- Charged DC starting battery with electrolyte
- Emergency stop button on the outside
- Flexible fuel lines & lub oil drain cock
- Exhaust outlet with flexible and flanges
- User’s manual (1 copy)
- Packing under plastic film
- Delivered with oil and antifreeze liquid

CODES AND STANDARDS


Engine-generators set is designed and manufactured in facilities certified to standards ISO9001:2015 & ISO14001:2015. The generator sets and
its components are prototype-tested, factory built and production tested and are in compliance with the relevant standards:

- Machinery Directive 2006/42/EC of May 17th 2006


- EMC Directive2014/30/UE
- Safety objectives set out in the Low Voltage Directive 2014/35/UE
- EN ISO 8528-13, EN 60034-1, EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 55011, EN 1679-1 et EN 60204-1

POWER RATINGS DEFINITION according to ISO8528-1 (2018-02 edition) and ISO-3046-1

Emergency Standby Power (ESP): The standby rating is applicable to varying loads for the duration of a power outage. There is no overload
capability for this rating. Average load factor per 24 hours of operation is <70%.

Prime Power (PRP): At varying load, the number of generator set operating hours is unlimited. A 10% overload capacity is available for one
hour within 12 hour of operation. Average load factor per 24 hours of operation is <70%.

Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit; Fuel density at 0.85 kg/L.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.
Industrial Diesel Generator Set – J40UM
60 Hz
TERMS OF USE
According to the standard, the nominal power assigned by the genset is given for 25°C Air Intlet Temperature, of a barometric pressure of 100
kPA (100 m A.S.L), and 30% relative humidity. For particular conditions in your installation, refer to the derating table.

WARRANTY INFORMATIONS
Standard Warranty Period:

- for Products in "back-up" service


o 30 months from the date the Product leaves the plant
o 24 months from the Product’s commissioning date
o 1,000 running hours
The warranty expires when one of the above conditions is met.

- for Products in “prime” or "continuous" service (continuous supply of electricity, either in the absence of any normal electricity grid
or to complement the grid),
o 18 months from the date the Product leaves the plant
o 12 months from the Product’s commissioning date
o 2,500 running hours
The warranty expires when one of the above conditions is met.

For more details regarding conditions of application and scope of the warranty please refer to our General “terms & conditions of sales”.

Reference Conditions: 25°C Air Inlet Temperature, 40°C Fuel Inlet Temperature, 100 kPa Barometric Pressure; 10.7 g/kg of dry air Humidity. Intake Restriction
set to maximum allowable limit for clean filter; Exhaust Back pressure set to maximum allowable limit; Fuel density at 0.85 kg/L.
Data was taken from a single engine test according to the test methods, fuel specification and reference conditions stated above and is subjected to
instrumentation and engine-to-engine variability. Test conducted with alternate test methods, instrumentation, fuel or reference conditions can yield
different results. Data and specifications subject to change without notice.

You might also like