IC Counterbalanced Lift Trucks

H4.0-5.5FT Fortens / Fortens Advance / Fortens Advance+

4 000 – 5 500 kg
Fortens H4.0FT, H4.5FT, H5.0FT, H5.5FT
1.1 Manufacturer
1.2 Model designation H4.0FT5 H4.0FT5 H4.0FT6 H4.0FT6 H4.5FTS5
Model - Manufacturer designation Fortens Fortens Fortens Fortens Fortens
Kubota 3.6L Kubota 3.6L Kubota 3.6L Kubota 3.6L Kubota 3.6L
CHARACTERISTICS

Engine/Transmission Basic Powershift Basic Powershift Basic Powershift Basic Powershift Basic Powershift
1-speed 2-speed 1-speed 2-speed 1-speed
Brake Type ADS Drum ADS Drum ADS Drum ADS Drum ADS Drum
1.3 Power: battery, diesel, LPG, electric mains Diesel Diesel Diesel Diesel Diesel
1.4 Operation: manual, pedestrian, stand, seat, orderpicker Seat Seat Seat Seat Seat
1.5 Load capacity Q (kg) 4 000 4 000 4 000 4 000 4 500
1.6 Load centre c (mm) 500 500 600 600 500
1.8 Load distance x (mm) 522,1 522,1 522,1 522,1 522,1
1.9 Wheelbase y (mm) 1 830 1 830 1 830 1 830 1 830

2.1 Unladen weight kg 6 298 6 298 6 672 6 672 6 630

WEIGHTS

2.2 Axle loading with load, front/rear kg 8 849 1 077 8 849 1 077 8 910 1 390 8 910 1 390 9 496 1 216
2.3 Axle loading without load, front/rear kg 2 923 3 375 2 923 3 375 3 003 3 669 3 003 3 669 2 829 3 801

3.1 Tyres: L=pneumatic, V=solid, SE=pneumatic-shaped solid SE SE SE SE SE

WHEELS & TYRES

3.2 Tyre size, front 250 x 15 250 x 15 250 x 15 250 x 15 250 x 15

3.3 Tyre size, rear 7,00 x 12 7,00 x 12 7,00 x 12 7,00 x 12 7,00 x 12
3.5 Number of wheels, front/rear (X = driven ) 2X 2 2X 2 2X 2 2X 2 2X 2
3.6 Track width, front b10 (mm) 1 152 1 152 1 152 1 152 1 152
3.7 Track width, rear b11 (mm) 1 136 1 136 1 136 1 136 1 136

4.1 Mast tilt, α = forward/β degrees 6F 10B 6F 10B 6F 10B 6F 10B 6F 10B
4.2 Height of mast, lowered h1 (mm) 2 175 2 175 2 175 2175 2 215
4.3 Free lift ¶ h2 (mm) 100 100 100 100 100
4.4 Lift height ¶ h3 (mm) 3 000 3 000 3 000 3 000 2 740
4.5 Height of mast, extended Ê h4 (mm) 3 815 3 815 3 815 3 815 3 730
4.7 Overhead guard height „ h6 (mm) 2 258 2 258 2 258 2 258 2 258
4.8 Seat height { h7 (mm) 1 159 1 159 1 159 1 159 1 159
4.12 Towing coupling height h10 (mm) 429 429 429 429 429
4.19 Overall length l1 (mm) 3 945 3 945 4 176 4 176 4 197
DIMENSIONS

4.20 Length to face of forks l2 (mm) 2 945 2 945 2 976 2 976 2 997
4.21 Overall width, standard/wide/dual drive b1/b2 (mm) 1 402 1 485 1 773 1 402 1 485 1 773 1 402 1 485 1 773 1 402 1 485 1 773 1 402 1 485 1 773
4.22 Fork dimensions s/e/l (mm) 50 x 120 x 1 000 50 x 120 x 1 000 50 x 120 x 1 200 50 x 120 x 1 200 60 x 150 x 1 200
4.23 Fork carriage DIN 15173. Class, A/B III A III A III A III A IV A
4.24 Fork carriage width z b3 (mm) 1 219 1 219 1 219 1 219 1 219
4.31 Ground clearance under mast, with load m1 (mm) 151 151 150 150 194
4.32 Ground clearance, centre of wheelbase m2 (mm) 194 194 194 194 194
4.33 Aisle width with pallets 1 000 mm x 1 200 mm wide Ast (mm) 4 292 4 292 4 321 4 321 4 341
4.34 Aisle width with pallets 800 mm x 1 200 mm long Ast (mm) 4 492 4 492 4 521 4 521 4 541
4.35 Outer turning radius Wa (mm) 2 570 2 570 2 599 2 599 2 619
4.36 Inner turning radius b13 (mm) 50 50 50 50 50

5.1 Travel speed with/without load km/hr 20,6 21,1 24,0 24,5 20,6 21,1 24,0 24,5 20,6 21,1
5.2 Lifting speed with/without load m/sec 0,62 0,67 0,62 0,67 0,62 0,67 0,62 0,67 0,45 0,49
PERFORMANCE

5.3 Lowering speed with/without load m/sec 0,55 0,47 0,55 0,47 0,55 0,47 0,55 0,47 0,51 0,42
5.5 Drawbar pull with/without load @ 1,6 km/h N 22 800 17 500 29 900 17 500 22 700 18 000 29,800 18,000 22 700 17 000
5.6 Maximum drawbar pull with/without load N 25 900 17 500 35 600 17 500 25 800 18 000 35,500 18,000 25 700 17 000
5.7 Gradeability with/without load @ 4,8 km/h † % 18,2 29,6 21,7 29,6 17,0 28,7 20,4 28,7 16,6 27,1
5.8 Maximum gradeability with/without load @1,6 km/h † % 24,6 29,6 32,8 29,6 23,1 28,7 30,8 28,7 22,0 27,1
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic

7.1 Engine manufacturer/Type ” Kubota 3.6L Kubota 3.6L Kubota 3.6L Kubota 3.6L Kubota 3.6L
7.2 Engine output, in accordance with ISO1585 kW 57 57 57 57 57
ENGINE

7.3 Governed speed rpm 2 400 2 400 2 400 2 400 2 400

7.4 Number of cylinders/displacements cm3 4 3 620 4 3 620 4 3 620 4 3 620 4 3 620
7.5 Fuel consumption in accordance with VDI cycle l/h (DSL) or kg/h (LPG) 5,98 6,21 6,05 6,26 6,72

8.1 Drive control Automatic Automatic Automatic Automatic Automatic

8.2 Working pressure for attachments bar 155 155 155 155 155
OTHER

8.3 Oil flow for attachments l/min 83,3 83,3 83,3 83,3 83,3
8.4 Average noise level at operator’s ear no cab/cab (Lpaz) ‘ dB (A) 80 80 80 80 80 80 80 80 80 80
Guaranteed sound power 2001/14/EC (Lwaz) dB 105 105 105 105 105
8.5 Towing coupling type Pin Pin Pin Pin Pin

Specification data is based on VDI 2198

Equipment and weight:

Weights (line 2.1) are based on the following specifications:
Complete truck with 3 050 mm (H4.0FT), 2 800 mm (H4.5-5.5FT) 2-stage limited free lift mast, standard carriage,
1 000 mm (H4.0FT) / 1 200 mm (H4.5-5.5FT) forks, manual hydraulics, overhead guard and standard pneumatic shaped
solid drive and steer tyres.
 `` 1.1
H4.5FTS5 H4.5FT6 H4.5FT6 H5.0FT H5.0FT H5.5FT H5.5FT 1.2
Fortens Fortens Fortens Fortens Fortens Fortens Fortens
Kubota 3.6L Kubota 3.6L Kubota 3.6L Kubota 3.6L Kubota 3.6L Kubota 3.6L Kubota 3.6L

CHARACTERISTICS
Basic Powershift Basic Powershift Basic Powershift Basic Powershift Basic Powershift Basic Powershift Basic Powershift
2-speed 1-speed 2-speed 1-speed 2-speed 1-speed 2-speed
ADS Drum Wet Brakes Wet Brakes Wet Brakes Wet Brakes Wet Brakes Wet Brakes
Diesel Diesel Diesel Diesel Diesel Diesel Diesel 1.3
Seat Seat Seat Seat Seat Seat Seat 1.4
4 500 4 500 4 500 5 000 5 000 5 500 5 500 1.5
500 600 600 600 600 600 600 1.6
522,1 590 590 590 590 590 590 1.8
1 830 2 100 2 100 2 100 2 100 2 100 2 100 1.9

WEIGHTS
6 630 7 224 7 224 7 523 7 523 7 808 7 808 2.1
9 496 1 216 10 596 1 164 10 596 1 164 11 241 1 272 11 241 1 272 11 882 1 370 11 882 1 370 2.2
2 829 3 801 3 473 3 751 3 473 3 751 3 406 4 117 3 406 4 117 3 335 4 474 3 335 4 474 2.3

SE SE SE SE SE SE SE 3.1

WHEELS & TYRES

250 x 15 300 x 15 300 x 15 300 x 15 300 x 15 300 x 15 300 x 15 3.2
7,00 x 12 28 x 9 - 15 28 x 9 - 15 28 x 9 - 15 28 x 9 - 15 28 x 9 - 15 28 x 9 - 15 3.3
2X 2 2X 2 2X 2 2X 2 2X 2 2X 2 2X 2 3.5
1 152 1 150 1 150 1 150 1 150 1 150 1 150 3.6
1 136 1 136 1 136 1 136 1 136 1 136 1 136 3.7

6F 10B 6F 10B 6F 10B 6F 10B 6F 10B 6F 10B 6F 10B 4.1

2 215 2 215 2 215 2 215 2 215 2 215 2 215 4.2
100 100 100 100 100 100 100 4.3
2 740 2 740 2 740 2 740 2 740 2 740 2 740 4.4
3 730 3 730 3 730 3 730 3 730 3 730 3 730 4.5
2 258 2 300 2 300 2 300 2 300 2 300 2 300 4.7
1 159 1 201 1 201 1 201 1 201 1 201 1 201 4.8
429 472 472 472 472 472 472 4.12
4 197 4 456 4 456 4 499 4 499 4 540 4 540 4.19

DIMENSIONS
2 997 3 256 3 256 3 299 3 299 3 340 3 340 4.20
1 402 1 485 1 773 1 450 1 575 1 875 1 450 1 577 1 875 1 450 1 575 1 875 1 450 1 575 1 875 1 450 1 575 1 875 1 450 1 575 1 875 4.21
60 x 150 x 1 200 60 x 150 x 1 200 60 x 150 x 1200 60 x 150 x 1 200 60 x 150 x 1 200 60 x 150 x 1 200 60 x 150 x 1 200 4.22
IV A IV A IV A IV A IV A IV A IV A 4.23
1 219 1 219 1 219 1 219 1 219 1 219 1 219 4.24
194 194 194 194 194 194 194 4.31
194 237 237 237 237 237 237 4.32
4 341 4 627 4 627 4 667 4 667 4 705 4 705 4.33
4 541 4 827 4 827 4 867 4 867 4 905 4 905 4.34
2 619 2 837 2 837 2 877 2 877 2 915 2 915 4.35
50 131 131 131 131 131 131 4.3

24,0 24,5 19,3 19,6 25,3 25,7 19,3 19,6 25,3 25,7 19,3 19,6 25,3 25,7 5.1
0,45 0,49 0,45 0,49 0,45 0,49 0,45 0,49 0,45 0,49 0,45 0,49 0,45 0,49 5.2
PERFORMANCE

0,51 0,42 0,51 0,42 0,51 0,42 0,51 0,42 0,51 0,42 0,51 0,42 0,51 0,42 5.3
29 700 17 000 24 000 21 300 28 300 21 300 23 900 20 900 28 100 20 900 23 700 20 600 28 000 20 600 5.5
35 400 17 000 27 500 21 300 33 400 21 300 27 300 20 900 33 200 20 900 27 200 20 600 33 100 20 600 5.6
19,0 27,1 15,7 31,5 17,5 31,5 14,6 26,6 16,3 26,6 13,7 27,9 15,3 27,9 5.7
30,0 27,1 21,6 31,5 25,7 31,5 20,1 29,6 23,9 29,6 18,9 27,9 22,4 27,9 5.8
Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic 5.10

Kubota 3.6L Kubota 3.6L Kubota 3.6L Kubota 3.6L Kubota 3.6L Kubota 3.6L Kubota 3.6 7.1
57 57 57 57 57 57 57 7.2
ENGINE

2 400 2 400 2 400 2 400 2 400 2 400 2 400 7.3

4 3 620 4 3 620 4 3 620 4 3 620 4 3 620 4 3 620 4 3 620 7.4
6,72 7,22 7,06 7,93 7,55 8,63 8,02* 7.5

Automatic Automatic Automatic Automatic Automatic Automatic Automatic 8.1

155 155 155 155 155 155 155 8.2
OTHER

83,3 83,3 83,3 83,3 83,3 83,3 83,3 8.3

80 80 80 80 80 80 80 80 80 80 80 80 80 80 8.4
105 105 105 105 105 105 105
Pin Pin Pin Pin Pin Pin Pin 8.5

The Kubota V3600 Diesel engine is only available in territories with category 1 diesel fuel,
which contains sulphur levels of over 500ppm. This engine is not compatible with (<500ppm)
or Ultra-Low (<15ppm) sulphur diesel fuel
Fortens Advance (1-speed) H4.0FT, H4.5FT, H5.0FT, H5.5FT
Fortens
1.1
H1.6FT, H1.8FT, H2.0FTS
Manufacturer
1.2 Model designation H4.0FT5 H4.0FT5 H4.0FT6 H4.0FT6 H4.5FTS5
Model - Manufacturer designation Fortens Advance Fortens Advance Fortens Advance Fortens Advance Fortens Advance
CHARACTERISTICS

Kubota 3.8L GM 4.3L Kubota 3.8L GM 4.3L Kubota 3.8L

Engine/Transmission
DuraMatch DuraMatch DuraMatch DuraMatch DuraMatch
Brake Type ADS Drum ADS Drum ADS Drum ADS Drum ADS Drum
1.3 Power: battery, diesel, LPG, electric mains Diesel LPG Diesel LPG Diesel
1.4 Operation: manual, pedestrian, stand, seat, orderpicker Seat Seat Seat Seat Seat
1.5 Load capacity Q (kg) 4 000 4 000 4 000 4 000 4 500
1.6 Load centre c (mm) 500 500 600 600 500
1.8 Load distance x (mm) 522,1 522,1 522,1 522,1 522,1
1.9 Wheelbase y (mm) 1 830 1 830 1 830 1 830 1 830

2.1 Unladen weight kg 6 298 6 033 6 672 6 243 6 630

WEIGHTS

2.2 Axle loading with load, front/rear kg 8 849 1 077 8 464 1 198 8 910 1 390 8 999 1 243 9 496 1 216
2.3 Axle loading without load, front/rear kg 2 923 3 375 2 603 3 429 3 003 3 669 2 561 3 682 2 829 3 801

3.1 Tyres: L=pneumatic, V=solid, SE=pneumatic-shaped solid SE SE SE SE SE

WHEELS & TYRES

3.2 Tyre size, front 250 x 15 250 x 15 250 x 15 250 x 15 250 x 15

3.3 Tyre size, rear 7,00 x 12 7,00 x 12 7,00 x 12 7,00 x 12 7,00 x 12
3.5 Number of wheels, front/rear (X = driven ) 2X 2 2X 2 2X 2 2X 2 2X 2
3.6 Track width, front b10 (mm) 1 152 1 152 1 152 1 152 1 152
3.7 Track width, rear b11 (mm) 1 136 1 136 1 136 1 136 1 136

4.1 Mast tilt, α = forward/β degrees 6 10 6 10 6 10 6 10 6 10

4.2 Height of mast, lowered h1 (mm) 2 175 2 175 2 175 2 175 2 215
4.3 Free lift ¶ h2 (mm) 100 100 100 100 100
4.4 Lift height ¶ h3 (mm) 3 000 3 000 3 000 3 000 2 740
4.5 Height of mast, extended Ê h4 (mm) 3 815 3 815 3 815 3 815 3 730
4.7 Overhead guard height „ h6 (mm) 2 258 2 258 2 258 2 258 2 258
4.8 Seat height { h7 (mm) 1 159 1 159 1 159 1 159 1 159
4.12 Towing coupling height h10 (mm) 429 429 429 429 429
4.19 Overall length l1 (mm) 3 945 3 945 4 176 4 176 4 197
DIMENSIONS

4.20 Length to face of forks l2 (mm) 2 945 2 945 2 976 2 976 2 997
4.21 Overall width, standard/wide/dual drive b1/b2 (mm) 1 402 1 485 1 773 1 402 1 485 1 773 1 402 1 485 1 773 1 402 1 485 1 773 1 402 1 485 1 773
4.22 Fork dimensions s/e/l (mm) 50 x 120 x 1 000 50 x 120 x 1 000 50 x 120 x 1 200 50 x 120 x 1 200 60 x 150 x 1 200
4.23 Fork carriage DIN 15173. Class, A/B III A III A III A III A IV A
4.24 Fork carriage width z b3 (mm) 1 219 1 219 1 219 1 219 1 219
4.31 Ground clearance under mast, with load m1 (mm) 151 151 150 150 194
4.32 Ground clearance, centre of wheelbase m2 (mm) 194 194 194 194 194
4.33 Aisle width with pallets 1 000 mm x 1 200 mm wide ‹ Ast (mm) 4 292 4 292 4 321 4 321 4 341
4.34 Aisle width with pallets 800 mm x 1 200 mm long ‹ Ast (mm) 4 492 4 492 4 521 4 521 4 541
4.35 Outer turning radius Wa (mm) 2 570 2 570 2 599 2 599 2 619
4.36 Inner turning radius b13 (mm) 50 50 50 50 50

5.1 Travel speed with/without load km/h 19.3 19,8 18,7 19,5 19.3 19,8 18,7 19,5 19.3 19.8
5.2 Lifting speed with/without load m/sec 0,62 0,63 0,61 0,63 0,62 0,63 0,61 0,63 0,45 0,46
PERFORMANCE

5.3 Lowering speed with/without load m/sec 0,55 0,47 0,55 0,47 0,55 0,47 0,55 0,47 0,51 0,42
5.5 Drawbar pull with/without load @ 1,6 km/h N 24 400 17 500 24 400 17 500 24 400 18 000 24 400 18 000 24 300 17 000
5.6 Maximum drawbar pull with/without load N 27 500 17 500 27 600 16 800 27 400 18 000 27 500 16 500 27 400 17 000
5.7 Gradeability with/without load @ 4,8 km/h † % 19,7 29,6 20,9 29,6 18,5 28,7 19,5 28,1 18,0 27,1
5.8 Maximum gradeability with/without load @1,6 km/h † % 26,4 29,6 27,1 29,6 24,8 28,7 25,4 28,1 24,2 27,1
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic

7.1 Engine manufacturer/Type ” Kubota 3.8L GM 4.3L Kubota 3.8L GM 4.3L Kubota 3.8L
7.2 Engine output, in accordance with ISO1585 kW 55 77 55 77 55
ENGINE

7.3 Governed speed rpm 2 200 2 400 2 200 2 400 2 200

7.4 Number of cylinders/displacements cm3 4 3 769 6 4 302 4 3 769 6 4 302 4 3 769
7.5 Fuel consumption in accordance with VDI cycle l/h (DSL) or kg/h (LPG) 4,01 4,96 4,08 5,02 4,73

8.1 Drive control Automatic Automatic Automatic Automatic Automatic

8.2 Working pressure for attachments bar 155 155 155 155 155
OTHER

8.3 Oil flow for attachments l/min 83,3 83,3 83,3 83,3 83,3
8.4 Average noise level at operator’s ear no cab/cab (Lpaz) ‘ dB (A) 79 79 82 80 79 79 82 80 79 79
Guaranteed sound power 2001/14/EC (Lwaz) dB 104 105 104 105 104
8.5 Towing coupling type Pin Pin Pin Pin Pin

Specification data is based on VDI 2198

Equipment and weight:

Weights (line 2.1) are based on the following specifications:
Complete truck with 3 050 mm (H4.0FT), 2 800 mm (H4.5-5.5FT) 2-stage limited free lift mast, standard carriage,
1 000 mm (H4.0FT) / 1 200 mm (H4.5-5.5FT) forks, e-hydraulics, overhead guard and standard pneumatic shaped solid
drive and steer tyres.
 `` 1.1
H4.5FTS5 H4.5FT6 H4.5FT6 H5.0FT H5.0FT H5.5FT H5.5FT 1.2
Fortens Advance Fortens Advance Fortens Advance Fortens Advance Fortens Advance Fortens Advance Fortens Advance

CHARACTERISTICS
GM 4.3L Kubota 3.8L GM 4.3L Kubota 3.8L GM 4.3L Kubota 3.8L GM 4.3L
DuraMatch DuraMatch DuraMatch DuraMatch DuraMatch DuraMatch DuraMatch
ADS Drum Wet Brakes Wet Brakes Wet Brakes Wet Brakes Wet Brakes Wet Brakes
LPG Diesel LPG Diesel LPG Diesel LPG 1.3
Seat Seat Seat Seat Seat Seat Seat 1.4
4 500 4 500 4 500 5 000 5 000 5 500 5 500 1.5
500 600 600 600 600 600 600 1.6
522,1 590 590 590 590 590 590 1.8
1 830 2 100 2 100 2 100 2 100 2 100 2 100 1.9

WEIGHTS
6 368 7 224 6 939 7 523 7 244 7 808 7 529 2.1
9 095 1 356 10 596 1 164 10 265 1 210 11 241 1 272 10 913 1 320 11 882 1 370 11 555 1 417 2.2
2 526 3 842 3 473 3 751 3 152 3 787 3 406 4 117 3 089 4 155 3 335 4 474 3 016 4 513 2.3

SE SE SE SE SE SE SE 3.1

WHEELS & TYRES

250 x 15 300 x 15 300 x 15 300 x 15 300 x 15 300 x 15 300 x 15 3.2
7,00 x 12 28 x 9 - 15 28 x 9 - 15 28 x 9 - 15 28 x 9 - 15 28 x 9 - 15 28 x 9 - 15 3.3
2X 2 2X 2 2X 2 2X 2 2X 2 2X 2 2X 2 3.5
1 152 1 150 1 150 1 150 1 150 1 150 1 150 3.6
1 136 1 136 1 136 1 136 1 136 1 136 1 136 3.7

6 10 6 10 6 10 6 10 6 10 6 10 6 10 4.1
2 215 2 215 2 215 2 215 2 215 2 215 2 215 4.2
100 100 100 100 100 100 100 4.3
2 740 2 740 2 740 2 740 2 740 2 740 2 740 4.4
3 730 3 730 3 730 3 730 3 730 3 730 3 730 4.5
2 258 2 300 2 300 2 300 2 300 2 300 2 300 4.7
1 159 1 201 1 201 1 201 1 201 1 201 1 201 4.8
429 472 472 472 472 472 472 4.12
4 197 4 456 4 456 4 499 4 499 4 540 4 540 4.19

DIMENSIONS
2 997 3 256 3 256 3 299 3 299 3 340 3 340 4.20
1 402 1 485 1 773 1 450 1 575 1 875 1 450 1 575 1 875 1 450 1 575 1 875 1 450 1 575 1 875 1 450 1 575 1 875 1 450 1 575 1 875 4.21
60 x 150 x 1 200 60 x 150 x 1 200 60 x 150 x 1 200 60 x 150 x 1 200 60 x 150 x 1 200 60 x 150 x 1 200 60 x 150 x 1 200 4.22
IV A IV A IV A IV A IV A IV A IV A 4.23
1 219 1 219 1 219 1 219 1 219 1 219 1 219 4.24
194 194 194 194 194 194 194 4.31
194 237 237 237 237 237 237 4.32
4 341 4 627 4 627 4 667 4 667 4 705 4 705 4.33
4 541 4 827 4 827 4 867 4 867 4 905 4 905 4.34
2 619 2 837 2 837 2 877 2 877 2 915 2 915 4.35
50 131 131 131 131 131 131 4.36

18,7 19,5 18,1 18,4 18,2 18,5 18,1 18,4 18,2 18,5 18,1 18,4 18,2 18,5 5.1
0,48 0,49 0,45 0,46 0,48 0,49 0,45 0,46 0,48 0,49 0,45 0,46 0,48 0,49 5.2
PERFORMANCE

0,51 0,42 0,51 0,42 0,51 0,42 0,51 0,42 0,51 0,42 0,51 0,42 0,51 0,42 5.3
24 300 17 000 25 700 21 300 24 500 21 300 25 600 20 900 24 400 20 900 25 500 20 600 24 200 20 600 5.5
27 500 16 300 29 200 21 300 28 100 20 200 29 100 20 900 28 000 20 000 29 000 20 600 28 000 19 700 5.6
19,0 27,1 17,1 31,5 17,5 31,1 15,9 26,6 16,3 29,4 14,9 27,9 16,5 27,7 5.7
24,8 27,1 23,3 31,5 22,9 31,1 21,7 29,6 21,3 29,4 20,3 27,9 21,7 27,7 5.8
Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic 5.10

GM 4.3L Kubota 3.8L GM 4.3L Kubota 3.8L GM 4.3L Kubota 3.8L GM 4.3L 7.1
77 55 77 55 77 55 77 7.2
ENGINE

2 400 2 200 2 400 2 200 2 400 2 200 2 400 7.3

6 4 302 4 3 769 6 4 302 4 3 769 6 4 302 4 3 769 6 4 302 7.4
5,25 5,21 5,33 5,90 5,54 6,56 5,76 7.5

Automatic Automatic Automatic Automatic Automatic Automatic Automatic 8.1

155 155 155 155 155 155 155 8.2
OTHER

83,3 83,3 83,3 83,3 83,3 83,3 83,3 8.3

82 80 79 79 82 80 79 79 82 80 79 79 82 80 8.4
105 104 105 104 105 104 105
Pin Pin Pin Pin Pin Pin Pin 8.5
Fortens Advance (2-speed) H4.0FT, H4.5FT, H5.0FT, H5.5FT
Fortens
1.1
H1.6FT, H1.8FT, H2.0FTS
Manufacturer
1.2 Model designation H4.0FT5 H4.0FT5 H4.0FT6 H4.0FT6 H4.5FTS5
Model - Manufacturer designation Fortens Advance Fortens Advance Fortens Advance Fortens Advance Fortens Advance
CHARACTERISTICS

Kubota 3.8L GM 4.3L Kubota 3.8L GM 4.3L Kubota 3.8L

Engine/Transmission
DuraMatch 2 DuraMatch 2 DuraMatch 2 DuraMatch 2 DuraMatch 2
Brake Type ADS Drum or Wet Brakes ADS Drum or Wet Brakes ADS Drum or Wet Brakes ADS Drum or Wet Brakes ADS Drum or Wet Brakes
1.3 Power: battery, diesel, LPG, electric mains Diesel LPG Diesel LPG Diesel
1.4 Operation: manual, pedestrian, stand, seat, orderpicker Seat Seat Seat Seat Seat
1.5 Load capacity Q (kg) 4 000 4 000 4 000 4 000 4 500
1.6 Load centre c (mm) 500 500 600 600 500
1.8 Load distance x (mm) 522,1 522,1 522,1 522,1 522,1
1.9 Wheelbase y (mm) 1 830 1 830 1 830 1 830 1 830

2.1 Unladen weight kg 6 298 6 033 6 672 6 243 6 630

WEIGHTS

2.2 Axle loading with load, front/rear kg 8 849 1 077 8 464 1 198 8 910 1 390 8 999 1 243 9 496 1 216
2.3 Axle loading without load, front/rear kg 2 923 3 375 2 603 3 429 3 003 3 669 2 561 3 682 2 829 3 801

3.1 Tyres: L=pneumatic, V=solid, SE=pneumatic-shaped solid SE SE SE SE SE

WHEELS & TYRES

3.2 Tyre size, front 250 x 15 250 x 15 250 x 15 250 x 15 250 x 15

3.3 Tyre size, rear 7,00 x 12 7,00 x 12 7,00 x 12 7,00 x 12 7,00 x 12
3.5 Number of wheels, front/rear (X = driven ) 2X 2 2X 2 2X 2 2X 2 2X 2
3.6 Track width, front b10 (mm) 1 152 1 152 1 152 1 152 1 152
3.7 Track width, rear b11 (mm) 1 136 1 136 1 136 1 136 1 136

4.1 Mast tilt, α = forward/β degrees 6 10 6 10 6 10 6 10 6 10

4.2 Height of mast, lowered h1 (mm) 2 175 2 175 2 175 2 175 2 215
4.3 Free lift ¶ h2 (mm) 100 100 100 100 100
4.4 Lift height ¶ h3 (mm) 3 000 3 000 3 000 3 000 2 740
4.5 Height of mast, extended Ê h4 (mm) 3 815 3 815 3 815 3 815 3 730
4.7 Overhead guard height „ h6 (mm) 2 258 2 258 2 258 2 258 2 258
4.8 Seat height { h7 (mm) 1 159 1 159 1 159 1 159 1 159
4.12 Towing coupling height h10 (mm) 429 429 429 429 429
4.19 Overall length l1 (mm) 3 945 3 945 4 176 4 176 4 197
DIMENSIONS

4.20 Length to face of forks l2 (mm) 2 945 2 945 2 976 2 976 2 997
4.21 Overall width, standard/wide/dual drive b1/b2 (mm) 1 402 1 485 1 773 1 402 1 485 1 773 1 402 1 485 1 773 1 402 1 485 1 773 1 402 1 485 1 773
4.22 Fork dimensions s/e/l (mm) 50 x 120 x 1 000 50 x 120 x 1 000 50 x 120 x 1 200 50 x 120 x 1 200 60 x 150 x 1 200
4.23 Fork carriage DIN 15173. Class, A/B III A III A III A III A IV A
4.24 Fork carriage width z b3 (mm) 1 219 1 219 1 219 1 219 1 219
4.31 Ground clearance under mast, with load m1 (mm) 151 151 150 150 194
4.32 Ground clearance, centre of wheelbase m2 (mm) 194 194 194 194 194
4.33 Aisle width with pallets 1 000 mm x 1 200 mm wide ‹ Ast (mm) 4 292 4 292 4 321 4 321 4 341
4.34 Aisle width with pallets 800 mm x 1 200 mm long ‹ Ast (mm) 4 492 4 492 4 521 4 521 4 541
4.35 Outer turning radius Wa (mm) 2 570 2 570 2 599 2 599 2 619
4.36 Inner turning radius b13 (mm) 50 50 50 50 50

5.1 Travel speed with/without load km/h 22.4 22.9 23,3 24,4 22.4 22.9 23,3 24,4 22.4 22.9
5.2 Lifting speed with/without load m/sec 0,62 0,63 0,61 0,63 0,62 0,63 0,61 0,63 0,45 0,46
PERFORMANCE

5.3 Lowering speed with/without load m/sec 0,55 0,47 0,55 0,47 0,55 0,47 0,55 0,47 0,51 0,42
5.5 Drawbar pull with/without load @ 1,6 km/h N 32 000 17 500 29 000 17 500 31 900 18 000 28 900 18 000 31 900 17 000
5.6 Maximum drawbar pull with/without load N 37 800 17 500 33 500 16 800 37 700 18 000 33 400 16 500 37 700 17 000
5.7 Gradeability with/without load @ 4,8 km/h † % 23,8 29,6 23,4 29,6 22,4 28,7 21,8 28,1 21,8 27,1
5.8 Maximum gradeability with/without load @1,6 km/h † % 35,5 29,6 32,7 29,6 33,3 28,7 30,5 28,1 32,4 27,1
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic

7.1 Engine manufacturer/Type ” Kubota 3.8L GM 4.3L Kubota 3.8L GM 4.3L Kubota 3.8L
7.2 Engine output, in accordance with ISO1585 kW 55 77 55 77 55
ENGINE

7.3 Governed speed rpm 2 200 2 400 2 200 2 400 2 200

7.4 Number of cylinders/displacements cm3 4 3 769 6 4 302 4 3 769 6 4 302 4 3 769
7.5 Fuel consumption in accordance with VDI cycle l/h (DSL) or kg/h (LPG) 4,18 5,2 4,23 5,2 4,73

8.1 Drive control Automatic Automatic Automatic Automatic Automatic

8.2 Working pressure for attachments bar 155 155 155 155 155
OTHER

8.3 Oil flow for attachments l/min 83,3 83,3 83,3 83,3 83,3
8.4 Average noise level at operator’s ear no cab/cab (Lpaz)‘ dB (A) 79 79 82 80 79 79 82 80 79 79
Guaranteed sound power 2001/14/EC (Lwaz) dB 104 105 104 105 104
8.5 Towing coupling type Pin Pin Pin Pin Pin

Specification data is based on VDI 2198

Equipment and weight:

Weights (line 2.1) are based on the following specifications:
Complete truck with 3 050 mm (H4.0FT), 2 800 mm (H4.5-5.5FT) 2-stage limited free lift mast, standard carriage,
1 000 mm (H4.0FT) / 1 200 mm (H4.5-5.5FT) forks, e-hydraulics, overhead guard and standard pneumatic shaped solid
drive and steer tyres.
 `` 1.1
H4.5FTS5 H4.5FT6 H4.5FT6 H5.0FT H5.0FT H5.5FT H5.5FT 1.2
Fortens Advance Fortens Advance Fortens Advance Fortens Advance Fortens Advance Fortens Advance Fortens Advance

CHARACTERISTICS
GM 4.3L Kubota 3.8L GM 4.3L Kubota 3.8L GM 4.3L Kubota 3.8L GM 4.3L
DuraMatch 2 DuraMatch 2 DuraMatch 2 DuraMatch 2 DuraMatch 2 DuraMatch 2 DuraMatch 2
ADS Drum or Wet Brakes Wet Brakes Wet Brakes Wet Brakes Wet Brakes Wet Brakes Wet Brakes
LPG Diesel LPG Diesel LPG Diesel LPG 1.3
Seat Seat Seat Seat Seat Seat Seat 1.4
4 500 4 500 4 500 5 000 5 000 5 500 5 500 1.5
500 600 600 600 600 600 600 1.6
522,1 590 590 590 590 590 590 1.8
1 830 2 100 2 100 2 100 2 100 2 100 2 100 1.9

WEIGHTS
6 368 7 224 6 939 7 523 7 244 7 808 7 529 2.1
9 095 1 356 10 596 1 164 10 265 1 210 11 241 1 272 10 913 1 320 11 882 1 370 11 555 1 417 2.2
2 526 3 842 3 473 3 751 3 152 3 787 3 406 4 117 3 089 4 155 3 335 4 474 3 016 4 513 2.3

SE SE SE SE SE SE SE 3.1

WHEELS & TYRES

250 x 15 300 x 15 300 x 15 300 x 15 300 x 15 300 x 15 300 x 15 3.2
7,00 x 12 28 x 9 - 15 28 x 9 - 15 28 x 9 - 15 28 x 9 - 15 28 x 9 - 15 28 x 9 - 15 3.3
2X 2 2X 2 2X 2 2X 2 2X 2 2X 2 2X 2 3.5
1 152 1 150 1 150 1 150 1 150 1 150 1 150 3.6
1 136 1 136 1 136 1 136 1 136 1 136 1 136 3.7

6 10 6 10 6 10 6 10 6 10 6 10 6 10 4.1
2 215 2 215 2 215 2 215 2 215 2 215 2 215 4.2
100 100 100 100 100 100 100 4.3
2 740 2 740 2 740 2 740 2 740 2 740 2 740 4.4
3 730 3 730 3 730 3 730 3 730 3 730 3 730 4.5
2 258 2 300 2 300 2 300 2 300 2 300 2 300 4.7
1 159 1 201 1 201 1 201 1 201 1 201 1 201 4.8
429 472 472 472 472 472 472 4.12
4 197 4 456 4 456 4 499 4 499 4 540 4 540 4.19

DIMENSIONS
2 997 3 256 3 256 3 299 3 299 3 340 3 340 4.20
1 402 1 485 1 773 1 450 1 575 1 875 1 450 1 575 1 875 1 450 1 575 1 875 1 450 1 575 1 875 1 450 1 575 1 875 1 450 1 575 1 875 4.21
60 x 150 x 1 200 60 x 150 x 1 200 60 x 150 x 1 200 60 x 150 x 1 200 60 x 150 x 1 200 60 x 150 x 1 200 60 x 150 x 1 200 4.22
IV A IV A IV A IV A IV A IV A IV A 4.23
1 219 1 219 1 219 1 219 1 219 1 219 1 219 4.24
194 194 194 194 194 194 194 4.31
194 237 237 237 237 237 237 4.32
4 341 4 627 4 627 4 667 4 667 4 705 4 705 4.33
4 541 4 827 4 827 4 867 4 867 4 905 4 905 4.34
2 619 2 837 2 837 2 877 2 877 2 915 2 915 4.35
50 131 131 131 131 131 131 4.36

23,3 24,4 23.7 24.1 22,7 23,2 23.7 24.1 22,7 23,2 23.7 24.1 22,7 23,2 5.1
0,48 0,49 0,45 0,46 0,48 0,49 0,45 0,46 0,48 0,49 0,45 0,46 0,48 0,49 5.2
PERFORMANCE

0,51 0,42 0,51 0,42 0,51 0,42 0,51 0,42 0,51 0,42 0,51 0,42 0,51 0,42 5.3
28 800 17 000 30 300 21 300 29 100 21 300 30 200 20 900 29 000 20 900 30 100 20 600 28 800 20 600 5.5
33 400 16 300 35 500 21 300 34 100 20 200 35 400 20 900 34 000 20 000 35 200 20 600 34 000 19 700 5.6
21,8 27,1 19,2 31,5 19,6 31,1 17,8 29,6 18,3 29,4 16,7 27,9 18,6 27,7 5.7
29,8 27,1 27,7 31,5 27,5 31,1 25,8 29,6 25,5 29,4 24,2 27,9 26,1 27,7 5.8
Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic 5.10

GM 4.3L Kubota 3.8L GM 4.3L Kubota 3.8L GM 4.3L Kubota 3.8L GM 4.3L 7.1
77 55 77 55 77 55 77 7.2
ENGINE

2 400 2 200 2 400 2 200 2 400 2 200 2 400 7.3

6 4 302 4 3 769 6 4 302 4 3 769 6 4 302 4 3 769 6 4 302 7.4
5,5 5,08 5,7 5,57 5,9 6,04 6,20 7.5

Automatic Automatic Automatic Automatic Automatic Automatic Automatic 8.1

155 155 155 155 155 155 155 8.2
OTHER

83,3 83,3 83,3 83,3 83,3 83,3 83,3 8.3

82 80 79 79 80 80 79 79 80 80 79 79 80 80 8.4
105 104 105 104 105 104 105
Pin Pin Pin Pin Pin Pin Pin 8.5
Fortens Advance+ H4.0FT, H4.5FT, H5.0FT, H5.5FT
Fortens
1.1
H1.6FT, H1.8FT, H2.0FTS
Manufacturer
1.2 Model designation H4.0FT5 H4.0FT5 H4.0FT6 H4.0FT6 H4.5FTS5
Model - Manufacturer designation Fortens Advance+ Fortens Advance+ Fortens Advance+ Fortens Advance+ Fortens Advance+
CHARACTERISTICS

Kubota 3.8L GM 4.3L Kubota 3.8L GM 4.3L Kubota 3.8L

Engine/Transmission
DuraMatch Plus 2 DuraMatch Plus 2 DuraMatch Plus 2 DuraMatch Plus 2 DuraMatch Plus 2
Brake Type Wet Brakes Wet Brakes Wet Brakes Wet Brakes Wet Brakes
1.3 Power: battery, diesel, LPG, electric mains Diesel LPG Diesel LPG Diesel
1.4 Operation: manual, pedestrian, stand, seat, orderpicker Seat Seat Seat Seat Seat
1.5 Load capacity Q (kg) 4 000 4 000 4 000 4 000 4 500
1.6 Load centre c (mm) 500 500 600 600 500
1.8 Load distance x (mm) 522,1 522,1 522,1 522,1 522,1
1.9 Wheelbase y (mm) 1 830 1 830 1 830 1 830 1 830
WEIGHTS

2.1 Unladen weight kg 6 298 6 033 6 672 6 243 6 630

2.2 Axle loading with load, front/rear kg 8 849 1 077 8 464 1 198 8 910 1 390 8 999 1 243 9 496 1 216
2.3 Axle loading without load, front/rear kg 2 923 3 375 2 603 3 429 3 003 3 669 2 561 3 682 2 829 3 801

3.1 Tyres: L=pneumatic, V=solid, SE=pneumatic-shaped solid SE SE SE SE SE

WHEELS & TYRES

3.2 Tyre size, front 250 x 15 250 x 15 250 x 15 250 x 15 250 x 15

3.3 Tyre size, rear 7,00 x 12 7,00 x 12 7,00 x 12 7,00 x 12 7,00 x 12
3.5 Number of wheels, front/rear (X = driven ) 2X 2 2X 2 2X 2 2X 2 2X 2
3.6 Track width, front b10 (mm) 1 152 1 152 1 152 1 152 1 152
3.7 Track width, rear b11 (mm) 1 136 1 136 1 136 1 136 1 136

4.1 Mast tilt, α = forward/β degrees 6F 10B 6F 10B 6F 10B 6F 10B 6F 10B
4.2 Height of mast, lowered h1 (mm) 2 175 2 175 2 175 2 175 2 215
4.3 Free lift ¶ h2 (mm) 100 100 100 100 100
4.4 Lift height ¶ h3 (mm) 3 000 3 000 3 000 3 000 2 740
4.5 Height of mast, extended Ê h4 (mm) 3 815 3 815 3 815 3 815 3 730
4.7 Overhead guard height „ h6 (mm) 2 258 2 258 2 258 2 258 2 258
4.8 Seat height { h7 (mm) 1 159 1 159 1 159 1 159 1 159
4.12 Towing coupling height h10 (mm) 429 429 429 429 429
4.19 Overall length l1 (mm) 3 945 3 945 4 176 4 176 4 197
DIMENSIONS

4.20 Length to face of forks l2 (mm) 2 945 2 945 2 976 2 976 2 997
4.21 Overall width, standard/wide/dual drive b1/b2 (mm) 1 402 1 485 1 773 1 402 1 485 1 773 1 402 1 485 1 773 1 402 1 485 1 773 1 402 1 485 1 773
4.22 Fork dimensions s/e/l (mm) 60 x 150 x 1 200 60 x 150 x 1 200 60 x 150 x 1 200 60 x 150 x 1 200 60 x 150 x 1 200
4.23 Fork carriage DIN 15173. Class, A/B III A III A III A III A IV A
4.24 Fork carriage width z b3 (mm) 1 219 1 219 1 219 1 219 1 219
4.31 Ground clearance under mast, with load m1 (mm) 151 151 150 150 194
4.32 Ground clearance, centre of wheelbase m2 (mm) 194 194 194 194 194
4.33 Aisle width with pallets 1 000 mm x 1 200 mm wide Ast (mm) 4 292 4 292 4 321 4 321 4 341
4.34 Aisle width with pallets 800 mm x 1 200 mm long Ast (mm) 4 492 4 492 4 521 4 521 4 541
4.35 Outer turning radius Wa (mm) 2 570 2 570 2 599 2 599 2 619
4.36 Inner turning radius b13 (mm) 50 50 50 50 50

5.1 Travel speed with/without load km/h 21,2 21,6 21,8 22,8 21,2 21,6 21,8 22,8 21,2 21,6
5.2 Lifting speed with/without load m/sec 0,62 0,63 0,61 0,63 0,62 0,63 0,61 0,63 0,45 0,46
PERFORMANCE

5.3 Lowering speed with/without load m/sec 0,55 0,47 0,55 0,47 0,55 0,47 0,55 0,47 0,51 0,42
5.5 Drawbar pull with/without load @ 1,6 km/h N 25 800 17 500 29 800 17 500 25 800 18 000 29 800 18 000 25 800 17 000
5.6 Maximum drawbar pull with/without load N 25 800 17 500 44 200 16 800 25 800 18 000 44 100 16 500 25 800 17 000
5.7 Gradeability with/without load @ 4,8 km/h † % 24,4 29,6 26,4 29,6 22,9 28,7 25,0 28,1 22,4 27,1
5.8 Maximum gradeability with/without load @1,6 km/h † % 28,4 29,6 42,0 29,6 26,4 28,7 39,1 28,1 25,8 27,1
5.10 Service brake Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic

7.1 Engine manufacturer/Type ” Kubota 3.8L GM 4.3L Kubota 3.8L GM 4.3L Kubota 3.8L
7.2 Engine output, in accordance with ISO1585 kW 55 77 55 77 55
ENGINE

7.3 Governed speed rpm 2 200 2 400 2 200 2 400 2 200

7.4 Number of cylinders/displacements cm3 4 3 769 6 4 302 4 3 769 6 4 302 4 3 769
7.5 Fuel consumption in accordance with VDI cycle l/h (DSL) or kg/h (LPG) TBA TBA TBA TBA TBA

8.1 Drive control Automatic Automatic Automatic Automatic Automatic

8.2 Working pressure for attachments bar 155 155 155 155 155
OTHER

8.3 Oil flow for attachments l/min 83,3 83,3 83,3 83,3 83,3
8.4 Average noise level at operator’s ear no cab/cab (Lpaz)‘ dB (A) 79 79 82 80 79 79 82 80 79 79
Guaranteed sound power 2001/14/EC (Lwaz) dB 104 105 104 105 104
8.5 Towing coupling type Pin Pin Pin Pin Pin

Specification data is based on VDI 2198

Equipment and weight:

Weights (line 2.1) are based on the following specifications:
Complete truck with 3 050 mm (H4.0FT), 2 800 mm (H4.5-5.5FT) 2-stage limited free lift mast, standard carriage,
1 000 mm (H4.0FT) / 1 200 mm (H4.5-5.5FT) forks, e-hydraulics, overhead guard and standard pneumatic shaped solid
drive and steer tyres.
 `` 1.1
H4.5FTS5 H4.5FT6 H4.5FT6 H5.0FT H5.0FT H5.5FT H5.5FT 1.2
Fortens Advance+ Fortens Advance+ Fortens Advance+ Fortens Advance+ Fortens Advance+ Fortens Advance+ Fortens Advance+

CHARACTERISTICS
GM 4.3L Kubota 3.8L GM 4.3L Kubota 3.8L GM 4.3L Kubota 3.8L GM 4.3L
DuraMatch Plus 2 DuraMatch Plus 2 DuraMatch Plus 2 DuraMatch Plus 2 DuraMatch Plus 2 DuraMatch Plus 2 DuraMatch Plus 2
Wet Brakes Wet Brakes Wet Brakes Wet Brakes Wet Brakes Wet Brakes Wet Brakes
LPG Diesel LPG Diesel LPG Diesel LPG 1.3
Seat Seat Seat Seat Seat Seat Seat 1.4
4 500 4 500 4 500 5 000 5 000 5 500 5 500 1.5
500 600 600 600 600 600 600 1.6
522,1 590 590 590 590 590 590 1.8
1 830 2 100 2 100 2 100 2 100 2 100 2 100 1.9

6 368 7 224 6 939 7 523 7 244 7 808 7 529 2.1

WEIGHTS
9 095 1 356 10 596 1 164 10 265 1 210 11 241 1 272 10 913 1 320 11 882 1 370 11 555 1 417 2.2
2 526 3 842 3 473 3 751 3 152 3 787 3 406 4 117 3 089 4 155 3 335 4 474 3 016 4 513 2.3

SE SE SE SE SE SE SE 3.1

WHEELS & TYRES

250 x 15 300 x 15 300 x 15 300 x 15 300 x 15 300 x 15 300 x 15 3.2
7,00 x 12 28 x 9 - 15 28 x 9 - 15 28 x 9 - 15 28 x 9 - 15 28 x 9 - 15 28 x 9 - 15 3.3
2X 2 2X 2 2X 2 2X 2 2X 2 2X 2 2X 2 3.5
1 152 1 150 1 150 1 150 1 150 1 150 1 150 3.6
1 136 1 136 1 136 1 136 1 136 1 136 1 136 3.7

6F 10B 6F 10B 6F 10B 6F 10B 6F 10B 6F 10B 6F 10B 4.1

2 215 2 215 2 215 2 215 2 215 2 215 2 215 4.2
100 100 100 100 100 100 100 4.3
2 740 2 740 2 740 2 740 2 740 2 740 2 740 4.4
3 730 3 730 3 730 3 730 3 730 3 730 3 730 4.5
2 258 2 300 2 300 2 300 2 300 2 300 2 300 4.7
1 159 1 201 1 201 1 201 1 201 1 201 1 201 4.8
429 472 472 472 472 472 472 4.12
4 197 4 456 4 456 4 499 4 499 4 540 4 540 4.19

DIMENSIONS
2 997 3 256 3 256 3 299 3 299 3 340 3 340 4.20
1 402 1 485 1 773 1 450 1 575 1 875 1 450 1 575 1 875 1 450 1 575 1 875 1 450 1 575 1 875 1 450 1 575 1 875 1 450 1 575 1 875 4.21
60 x 150 x 1 200 60 x 150 x 1 200 60 x 150 x 1 200 60 x 150 x 1 200 60 x 150 x 1 200 60 x 150 x 1 200 60 x 150 x 1 200 4.22
IV A IV A IV A IV A IV A IV A IV A 4.23
1 219 1 219 1 219 1 219 1 219 1 219 1 219 4.24
194 194 194 194 194 194 194 4.31
194 237 237 237 237 237 237 4.32
4 341 4 627 4 627 4 667 4 667 4 705 4 705 4.33
4 541 4 827 4 827 4 867 4 867 4 905 4 905 4.34
2 619 2 837 2 837 2 877 2 877 2 915 2 915 4.35
50 131 131 131 131 131 131 4.36

21,8 22,8 21,2 21,7 22,7 23,2 21,2 21,7 22,7 23,2 21,2 21,7 22,7 23,2 5.1
0,48 0,49 0,45 0,46 0,48 0,49 0,45 0,46 0,48 0,49 0,45 0,46 0,48 0,49 5.2
PERFORMANCE

0,51 0,42 0,51 0,42 0,51 0,42 0,51 0,42 0,51 0,42 0,51 0,42 0,51 0,42 5.3
29 800 17 000 25 800 17 000 25 800 21 300 25 800 20 900 25 800 20 900 25 800 20 600 25 800 20 600 5.5
44 100 16 300 25 800 17 000 39 400 20 200 25 800 20 900 39 400 20 000 25 800 20 600 39 400 19 700 5.6
24,4 27,1 20,1 27,1 21,7 31,1 18,7 29,6 20,1 29,4 17,5 27,9 20,4 27,7 5.7
38,2 27,1 23,4 27,1 30,1 31,1 21,9 29,6 28,1 29,4 20,6 27,9 28,5 27,7 5.8
Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic 5.10

GM 4.3L Kubota 3.8L GM 4.3L Kubota 3.8L GM 4.3L Kubota 3.8L GM 4.3L 7.1
77 55 77 55 77 55 77 7.2
ENGINE

2 400 2 200 2 400 2 200 2 400 2 200 2 400 7.3

6 4 302 4 3 769 6 4 302 4 3 769 6 4 302 4 3 769 6 4 302 7.4
TBA TBA TBA TBA TBA TBA TBA 7.5

Automatic Automatic Automatic Automatic Automatic Automatic Automatic 8.1

155 155 155 155 155 155 155 8.2
OTHER

83,3 83,3 83,3 83,3 83,3 83,3 83,3 8.3

82 80 79 79 80 80 79 79 80 80 79 79 80 80 8.4
105 104 105 104 105 104 105
Pin Pin Pin Pin Pin Pin Pin 8.5
Mast and capacity information
Masts H4.0FT5/FT6 Masts H4.5FTS5-H5.5FT
Maximum Back Overall Overall Free lift Maximum Back Overall Overall Free lift Values shown are for
fork height tilt lowered Extended (top of forks) fork height tilt lowered Extended (top of forks) standard equipment.
(mm) height (mm) height (mm) (mm) (mm) height (mm) height (mm) (mm) When using non-standard
10˚ 2 175 4 300 ™ 150 V 10˚ 2 215 4 065 ™ 160 V equipment, these values
2-Stage 3 050 2-Stage 2 800
3 650 10˚ 2 475 4 900 ™ 150 V 10˚ 2 515 4 665 ™ 160 V may change. Please
Limited Limited 3 400
4 250 10˚ 2 775 5 500 ™ 150 V 10˚ 2 815 5 265 ™ 160 V contact your Hyster dealer
Free Lift Free Lift 4 000
4 950 6˚ 3 225 6 200 ™ 150 V 6˚ for information.
4 700 3 265 5 965 ™ 160 V
6˚
5 300 6˚ 3 665 6 565 ™ 160 V
5 900 4 065 7 165 ™ 160 V

2-Stage 3 075 10˚ 2 175 4 325 ™ 1 355 V 2-Stage 2 825 10˚ 2 215 4 090 ™ 1 230 V
Full Free Lift 3 675 10˚ 2 475 4 925 ™ 1 655 V Full Free Lift 3 425 10˚ 2 515 4 690 ™ 1 530 V

4 415 6˚ 2 175 5 665 ™ 1 355 V

3-Stage 6˚ 2 375 6 200 ™ 1 555 V 3-Stage 4 415 6˚ 2 215 5 415 ™ 1 230 V
4 950
Full Free Lift 6˚ 2 475 6 500 ™ 1 655 V Full Free Lift 5 000 6˚ 2 515 6 265 ™ 1 530 V
5 250
6˚ 2 575 6 800 ™ 1 755 V 5 300 6˚ 2 615 6 565 ™ 1 630 V
5 550
6 000 6˚ 2 775 7 250 ™ 1 955 V

H4.0FT5-H4.0FT6 - Capacity chart in kg @ 500 mm (a) or 600 mm (b) load centre H4.0FT5-H4.0FT6 - Capacity chart in kg @ 500 mm (a) or 600 mm (b) load centre
Pneumatic Shaped Solid Tyres Michelin (Radial) Tyres
Maximum Without sideshift Without sideshift Maximum Without sideshift Without sideshift
fork height fork height
H4.0FT5 (a) H4.0T6 (b) H4.0FT5 (a) H4.0FT6 (b) H4.0FT5 (a) H4.0T6 (b) H4.0FT5 (a) H4.0FT6 (b)
(mm) (mm)

3 050 4 000 4 000 4 000 4 000 3 050 4 000 4 000 4 000 4 000
2-Stage 2-Stage
3 650 4 000 4 000 4 000 4 000 3 650 4 000 4 000 4 000 4 000
Limited Limited
4 250 4 000 4 000 4 000 4 000 4 250 4 000 4 000 4 000 4 000
Free Lift Free Lift
4 950 3 890 3 890 3 890 3 890 4 950 3 880 3 890 3 880 3 890

2-Stage 3 075 4 000 4 000 4 000 4 000 2-Stage 3 075 4 000 4 000 4 000 4 000
Full Free Lift 3 675 4 000 4 000 4 000 4 000 Full Free Lift 3 675 4 000 4 000 4 000 4 000

4 415 4 000 4 000 4 000 4 000 4 415 4 000 4 000 4 000 4 000
3-Stage 4 950 3 880 3 880 3 880 3 810 3-Stage 4 950 3 880 œ 3 880 œ 3 880 œ 3 870 œ
Full Free Lift 5 250 3 810 3 810 3 810 3 790 Full Free Lift 5 250 3 800 œ 3 810 œ 3 800 œ 3 790 œ
5 550 3 730 3 740 3 730 3 710 5 550 3 730 µ 3 740 µ 3 730 µ 3 710 µ
6 000 3 610 3 620 3 590 3 580 6 000 3 610 µ 3 620 µ 3 590 µ 3 580 µ

H4.5FTS5-H5.5FT - Capacity chart in kg @ 500 mm (a) or 600 mm (b) load centre

Pneumatic Shaped Solid Tyres
Maximum Without sideshift Without sideshift Maximum With integral sideshift With integral sideshift
fork height fork height
H4.5FT5 (a) H4.0T6 (b) H4.0FT5 (a) H4.0FT6 (b) H4.0FT5 (a) H4.0FT6 (b) H4.0FT5 (a) H4.0FT6 (b)
(mm) (mm)
2 800 4 500 4 500 5 000 5 500 2 800 4 500 4 500 5 000 5 500
3 400 4 500 4 500 5 000 5 500 3 400 4 500 4 500 5 000 5 500
2-Stage 4 500 4 500 5 000 5 500 4 000 4 480 4 500 5 000 5 500
4 000
Limited 4 390 4 390 4 890 5 380 4 700 4 340 4 390 4 890 5 380
4 700
Free Lift 4 240 4 250 4 740 5 230 5 300 4 160 4 250 4 740 5 230
5 300
5 900 4 070 4 100 4 580 5 050 5 900 3 970 4 100 4 580 5 050

2-Stage 2 825 4 500 4 500 5 000 5 500 2 825 4 480 4 500 5 000 5 500
Full Free Lift 3 425 4 500 4 500 5 000 5 500 3 425 4 460 4 500 5 000 5 500

4 145 4 500 4 500 5 000 5 500 4 145 4 420 4 500 5 000 5 500
3-Stage 4 310
5 000 4 300 4 800 5 290 5 000 4 200 4 310 4 800 5 290
Full Free Lift 4 240
5 300 4 230 4 730 5 210 5 300 4 120 4 240 4 730 5 210

H4.5FTS5-H5.5FT - Capacity chart in kg @ 500 mm (a) or 600 mm (b) load centre

Michelin (Radial) Tyres
Maximum Without sideshift Without sideshift Maximum With integral sideshift With integral sideshift
fork height fork height
H4.5FTS5 (a) H4.5FT6 (b) H5.0FT (b) H5.5FT (b) H4.5FTS5 (a) H4.5FT6 (b) H5.0FT (b) H5.5FT (b)
(mm) (mm)
2 800 4 500 4 500 5 000 5 500 2 800 4 500 4 500 5 000 5 500
3 400 4 500 4 500 5 000 5 500 3 400 4 500 4 500 5 000 5 500
2-Stage 5 500
4 000 4 500 4 500 5 000 5 500 4 000 4 480 4 500 5 000
Limited 5 380 œ
4 700 4 380 4 390 4 880 5 380 œ 4 700 4 340 4 390 4 880
Free Lift 5 220 œ
5 300 4 230 œ 4 250 œ 4 730 œ 5 220 œ 5 300 4 160 œ 4 250 œ 4 730 œ
5 900 4 070 µ 4 090 œ 4 570 µ 5 050 µ 5 900 3 970 µ 4 090 œ 4 570 µ 5 050 µ

2-Stage 2 825 4 500 4 500 5 000 5 500 2 825 4 480 4 500 5 000 5 500
Full Free Lift 3 425 4 500 4 500 5 000 5 500 3 425 4 460 4 500 5 000 5 500

4 145 4 500 4 500 5 000 5 500 4 145 4 420 4 500 5 000 5 500
3-Stage
5 000 4 270 œ 4 310 œ 4 800 œ 5 290 œ 5 000 4 200 œ 4 310 œ 4 800 œ 5 290 œ
Full Free Lift
5 300 4 220 µ 4 240 œ 4 730 µ 5 210 µ 5 300 4 120 µ 4 240 œ 4 730 µ 5 210 µ

NOTES
To calculate truck capacities with alternative truck specifications to the ones shown in the above tables, please consult your Hyster dealer.

The rated capacities shown are for masts in a vertical position on trucks equipped with standard or sideshift carriage, and nominal length forks. Masts above the maximum fork
heights shown in the mast table are classified as high lift, and depending on the tyre/tread configuration may require reduced capacity, restricted back tilt or wide tread.
Truck Dimensions
NOTE:
Specifications are affected by the condition of
the vehicle and how it is equipped, as well as the
nature and condition of the operating area. If these
specifications are critical, the proposed application
should be discussed with your dealer.

¶ Top of forks

Ê Without load backrest

„ h6 subject to +/- 5 mm tolerance.

{ Full-suspension seat in depressed position

z Subtract 32 mm without load backrest

‹ Stacking aisle width (lines 4.33 & 4.34) are

based on the V.D.I. standard calculation as
shown on illustration. The British Industrial
Truck Association recommends the
addition of 100 mm to the total clearance
(dimension a) for extra operating margin at
the rear of the truck.

† Gradeability figures (lines 5.7 & 5.8)

are provided for comparison of tractive
performance, but are not intended to
endorse the operation of the vehicle on the
stated inclines. Follow instructions in the
operating manual regarding operation on
inclines.

˜ Variable

‘ Measured according to the test cycles and

based on the weighting values contained in
EN12053

‘ Noise levels are reduced by 3dB(A) with

ECO-eLo mode engaged.

” The Kubota V3600 Diesel engine is only

compatible with category 1 diesel fuel, which
contains sulphur levels of over 500ppm.

The Kubota V3800 3.8L Diesel engine is

= Centre of gravity of unladen truck equipped with a cooled EGR system, which
requires the use of Low (<500ppm) or
Ast = Wa + x + l6 + a (see lines 4.33 & 4.34) Ultra-Low (<15ppm) sulphur fuel.
a = Minimum operating clearance Mast tables:
(V.D.I. standard = 200 mm BITA recommendation = 300 mm)
™ With load backrest
l6 = Load length
V Without load backrest

œ Wide tread or Dual Drive Wheels required

µ Dual Drive Wheels required

Dimensions
(mm) H4.0FT5 H4.0FT6 H4.5FT5 H4.5FT6 H5.0FT H5.5FT

f 37% 27.5% 33% 32% 32% 28%

g 28,0˚ 28,0˚ 28,0˚ 30,0˚ 30,0˚ 30,0˚

k 441 441 441 484 484 484

n 1 062 1 062 1 062 1 062 1 062 1 062

Rated Capacities
Notice
Load centre
Care must be exercised when handling elevated
Distance from front of forks to centre of
loads. When the carriage and/or load is elevated,
Rated load (kg)

gravity of load.
truck stability is reduced. It is important that mast
Rated load tilt in either direction be kept to a minimum when
Based on vertical masts up to 4 250 mm loads are elevated. Operators must be trained
H5.5FT
H5.0FT (H4.0FT) and 4 000 mm (H4.5-5.5FT). and adhere to the instructions contained in the
H4.5FT6
H4.5FTS5 Operating Manual.
H4.0FT6
H4.0FT5 Hyster products are subject to change without notice.
Lift trucks illustrated may feature optional equipment.
Load centre (mm)

Safety:
This truck conforms to the current EU requirements.
Product Packages
The Hyster FortensTM range has been designed to match the vast range of application requirements and business objectives that
customers demand.
The H4.0-5.5FT Series is available in several truck packages, with multiple powertrain combinations to choose from, to best match
operational demands. Each configuration offers improved efficiency, advanced dependability, lower cost of operations and simple
serviceability.

Model / Bundle H4.0FT5 H4.0FT6

DIESEL Engine Transmission Brakes Engine Transmission Brakes
Fortens Kubota V3600 a Electronic Powershift Drum Kubota V3600 a Electronic Powershift Drum
1 or 2 speed 1 or 2 speed
Fortens Advance Kubota V3800 • DuraMatch™ Electronic ADS Drum Kubota V3800 • DuraMatch™ Electronic ADS Drum
1 or 2 speed 1 or 2 speed
Fortens Advance Kubota V3800 • DuraMatch™ Electronic Wet Kubota V3800 • DuraMatch™ Electronic Wet
2 speed 2 speed
Fortens Advance+ Kubota V3800 • DuraMatch™ Plus Wet Kubota V3800 • DuraMatch™ Plus Wet
2 speed 2 speed

Model / Bundle H4.5FTS5 H4.5T6

DIESEL Engine Transmission Brakes Engine Transmission Brakes
Fortens Kubota V3600 a Electronic Powershift Drum Kubota V3600 a Electronic Powershift Wet
1 or 2 speed 1 or 2 speed

Fortens Advance Kubota V3800 • DuraMatch™ Electronic ADS Drum Kubota V3800 • DuraMatch™ Electronic Wet
1 or 2 speed 1 or 2 speed

Fortens Advance Kubota V3800 • DuraMatch™ Electronic Wet - - -

2 speed

Fortens Advance+ Kubota V3800 • DuraMatch™ Plus Wet Kubota V3800 • DuraMatch™ Plus Wet
2 speed 2 speed

Model / Bundle H5.0FT H5.5FT

DIESEL Engine Transmission Brakes Engine Transmission Brakes
Fortens Kubota V3600 a Electronic Powershift Wet Kubota V3600 a Electronic Powershift Wet
1 or 2 speed 1 or 2 speed

Fortens Advance Kubota V3800 • DuraMatch™ Electronic Wet Kubota V3800 • DuraMatch™ Electronic Wet
1 or 2 speed 1 or 2 speed

Fortens Advance+ Kubota V3800 • DuraMatch™ Plus Wet Kubota V3800 • DuraMatch™ Plus Wet
2 speed 2 speed

Model / Bundle H4.0FT5 H4.0FT6

LPG Engine Transmission Brakes Engine Transmission Brakes
Fortens Advance GM 4.3L V6 DuraMatch™ Electronic ADS Drum GM 4.3L V6 DuraMatch™ Electronic ADS Drum
1 or 2 speed 1 or 2 speed

Fortens Advance GM 4.3L V6 DuraMatch™ Electronic Wet GM 4.3L V6 DuraMatch™ Electronic Wet
2 speed 2 speed

Fortens Advance+ GM 4.3L V6 DuraMatch™ Plus Wet GM 4.3L V6 DuraMatch™ Plus Wet
2 speed 2 speed

Model / Bundle H4.5FTS5 H4.5FT6

Diesel Engine Transmission Brakes Engine Transmission Brakes
Fortens Advance GM 4.3L V6 DuraMatch™ Electronic ADS Drum GM 4.3L V6 DuraMatch™ Electronic Wet
1 or 2 speed 1 or 2 speed

Fortens Advance GM 4.3L V6 DuraMatch™ Electronic Wet - - -

2 speed

Fortens Advance+ GM 4.3L V6 DuraMatch™ Plus Wet GM 4.3L V6 DuraMatch™ Plus Wet
2 speed 2 speed

Model / Bundle H5.0FT H5.5FT

Diesel Engine Transmission Brakes Engine Transmission Brakes
Fortens Advance GM 4.3L V6 DuraMatch™ Electronic Wet GM 4.3L V6 DuraMatch™ Electronic Wet
1 or 2 speed 1 or 2 speed

Fortens Advance+ GM 4.3L V6 DuraMatch™ Plus Wet GM 4.3L V6 DuraMatch™ Plus Wet
2 speed 2 speed

Please refer to the Price List for full option configurations.

NOTES
a Kubota V3600 Diesel engine is only compatible with category 1 diesel fuel, which contains sulphur levels of over 500ppm.
• Kubota V3800 3.8L Diesel engine is equipped with a cooled EGR system, which requires the use of Low (<500ppm) or Ultra-Low (<15ppm) sulphur fuel.
Product Features
Fortens models feature the new Kubota V3600 tyre spin and shock loads on the transmission and
4-cylinder IDI-T mechanically controlled turbocharged significantly increases tyre life. As with ADS, the
diesel engine with 57kW, for use in those markets system is programmable via the dash display by
where EU diesel exhaust standards are not currently a service technician, with settings from 1 to 10, to
applied. The engine will only operate with category 1 suit the needs of the application.
diesel fuel only, which contains sulphur levels of over
„ Controlled Roll-Back on Ramp; the transmission
500ppm. It is not compatible with low or Ultra-low
controls the rate of decent of the truck on a ramp,
sulphur diesel.
when the brake and throttle pedal are released, to
This mechanically controlled engine is combined provide maximum control on a grade and increase
with a new electronic powershift transmission, operator productivity.
available with one or two speeds and Cowl Mounted
The Fortens Advance+ models feature the
Mechanical Levers. Engine rpm, coolant temperature
electronically controlled two-speed extended
and oil pressure are monitored by the VSM.
function DuraMatch™ Plus2 transmission. This
Fortens Advance & Advance+ models feature the new transmission, in addition to the above, features:
Kubota V3800 E3 turbocharged diesel engine with
„ Throttle Response Management allows the
55.4 kW or the GM 4.3L V6 LPG engine with 77kW.
operator to manage his travel speed, according to
The new Kubota V3800 engine is equipped with a the position of his foot on the accelerator pedal.
Cooled Exhaust Gas Recirculation (EGR) system For example, a certain speed can be maintained
which reduces the NOx emissions by re-circulating both on the flat and on a gradient, without the
a part of the exhaust gases back into the engine need to depress the pedal further. The system also
to directly reduce NOx inside the engine. The EGR compensates for hydraulic operation and drawbar
is self-contained and avoids the need for any fuel pull.
additive. It requires the use of Low (<500ppm) or
„ Dynamic Auto Deceleration System; as with
Ultra-Low (<15ppm) sulphur fuel - Diesel fuel with a
the DuraMatch™, the operator can slow the truck
higher sulphur content will compromise emissions
down without using the brake and the rate of
performance and result in damage to EGR system
braking is determined by the dashboard settings
components. The engine also features a high
1-10. In addition, thanks to the Throttle Response
pressure common rail fuel system, which dramatically
Management feature, the rate of deceleration can
reduces engine noise while providing more responsive
be further fine-tuned according to the rate at which
power and better fuel efficiency at every rpm.
the driver releases his foot from the accelerator
Fortens models, with the Kubota V3600 engine, are pedal.
available with an Electronic Powershift transmission
„ Auto-Speed Hydraulics with Automatic
only, featuring either one or two speeds.
Inching Control; when lifting a load, the engine
Fortens Advance models feature the electronically speed is automatically increased to provide full
controlled DuraMatch™ transmission, with one hydraulic power. The Pacesetter VSM™ maintains
and two speeds respectively, providing: the current travel speed (or prevents travel) until
operator steps on accelerator. No operator
„ Auto Deceleration System (ADS) automatically
inching is required and productivity is increased by
slows the truck when the accelerator pedal is
simplifying operator actions.
released, and finally brings the truck to a stop,
which helps to significantly extend brake life. In „ First Gear offers Increased Drawbar Pull for use
addition, this feature assists the driver to accurately on gradients.
position the truck in front of a load. There are
„ Second Gear provides maximum engine efficiency
10 ADS settings, programmable via the dash
in applications where longer travel distances are
display by a service technician, which deliver
common.
different braking characteristics, from very gradual
to aggressive, to suit the needs of the application. The transmissions are compatible with the
combi-cooler radiator and a superior counterweight
„ Controlled Power Reversal; the Pacesetter
tunnel design coupled with a “pusher” type fan, to
VSM™ controls the transmission to deliver smooth
provide the industry’s best cooling.
direction changes. The VSM reduces the throttle
to slow the engine, initiates auto-deceleration The available Oil-immersed brakes offer reduced
to stop the truck, changes the transmission maintenance & repair time and costs, which results in
direction automatically and increases the throttle to extended truck dependability and uptime.
accelerate the truck. The system virtually eliminates
Trucks fitted with Oil-immersed brakes are ideally The operator compartment features class-leading
suited to applications in wet, dirty or corrosive Ergonomics for maximum driver comfort and
environments, and ensure consistent braking productivity.
performance over the lifetime of the truck. This is
„ Operator space is optimised, thanks to a new
thanks to the sealed unit that houses and protects the
overhead guard design and significantly more floor
brakes, so preventing contaminants and damage.
space.
All powertrains are controlled, protected and
„ The Easy-to-use 3-point entry design of operator
managed by The Pacesetter VSM™ industrial
compartment has an open non-slip step with a
onboard computer, featuring a CANbus
height of just 42.5 cm.
communications network.
„ The new FLM80 Full Suspension Seat together
This system permits adjustment and optimisation of
with the isolated powertrain provide best in class
the truck’s performance, in addition to monitoring
Whole-Body Vibration levels of 0.6m/s2, ensuring
key functions. It enables quick, easy diagnostics,
that the operator remains comfortable throughout
minimizing repair downtime and unnecessary parts
the shift and fatigue, aches and pains are kept to a
swapping.
minimum.
Hassle-Free Hydraulic systems, featuring Leak-free
„ The new mini-lever armrest features a new
O-ring face seal fittings reduce leaks for enhanced
contoured design, and - in addition to the hydraulic
reliability.
functions - features a horn and direction switch,
Non-mechanical, Hall-Effect sensors and switches ensuring that all key truck functions are within
have been fitted and are designed to outlast the life of constant, easy reach.
the truck.
„ The Rear grab handle with horn button facilitates
Load Sensing Hydraulics (LSH), where available, reverse driving.
deliver increased operational efficiency, providing a
„ An infinitely adjustable steering column, 30 cm
15% reduction in fuel consumption on the VDI cycle,
diameter steering wheel with spinner knob and
with no loss in productivity*. Variable displacement
full-suspension seat enhance driver comfort.
piston pumps match the flow rate and lifting speed
continuously to the demands of the duty cycle. The The Hyster Fortens is the fastest and easiest lift truck
engine therefore supplies only power to the hydraulic to Service.
pumps when required, so more power is available for „ Complete cowl-to-counterweight service access
driving. This provides increased responsiveness and and simplified layout of wiring and hydraulics offers
acceleration, which increases productivity and lowers greater access to components, which in turn
fuel consumption, reducing overall operating costs. decreases service time for unscheduled repairs and
LSH also offers an ECO-eLo (Fuel Efficiency) mode, regular maintenance.
reducing engine speed by 20% and optimising throttle „ Fast, colour-coded daily checks and diagnostic
response, so that the truck operates in the most systems can be managed via the dash display.
economical power range. This results in a reduction
in fuel consumption of up to 20%* but has a limited „ An Engine coolant change and Hydraulic oil change
effect on overall truck productivity under application interval of 4 000 hours also contributes to reduced
conditions. The ECO-eLo mode also delivers lower downtime.
noise levels by up to 3dB(A). If a faster work rate, or
higher productivity is required, the truck can easily
be reprogrammed to HiP (High Performance) mode
of operation through the dash display, with access
secured by a unique customer password.
(*Hyster Productivity Test Cycle: Load Sensing
Hydraulics and ECO-eLo functions are available on
trucks with TouchPoint
mini-levers and DuraMatch transmissions).
 Strong Partners, Tough Trucks,
for Demanding Operations, Everywhere.
Hyster supplies a complete range of warehouse equipment, IC and
electric counterbalanced trucks, container handlers and reach stackers.
Hyster is committed to being much more than a lift truck supplier.

Our aim is to offer a complete partnership capable of responding

to the full spectrum of material handling issues: Whether you need
professional consultancy on your fleet management, fully qualified
service support, or reliable parts supply, you can depend on Hyster.

Our network of highly trained dealers provides expert, responsive local

support. They can offer cost-effective finance packages and introduce
effectively managed maintenance programmes to ensure that you get
the best possible value. Our business is dealing with your material
handling needs so you can focus on the success of your business
today and in the future.

Hyster Europe
Flagship House, Reading Road North, Fleet, Hants GU51 4WD, England.
Tel: +44 (0) 1252 810261

www.hyster.eu @ [email protected] /HysterEurope @HysterEurope /HysterEurope

HYSTER and FORTENS are registered trademarks in the European Union and certain other jurisdictions.
MONOTROL is a registered trademark, and DURAMATCH and are trademarks in the United States and in certain other jurisdictions.
Hyster products are subject to change without notice. Lift trucks illustrated may feature optional equipment.

Form number: 901054/9. Printed in England. TLC/03/12. A division of NACCO Materials Handling Limited.