Ohm's

law lab pdf

Easy way to remember ohm's law. Ohm's law experiment lab report pdf. Ohm's law lab manual pdf. Ohm's law lab answers. Verification of ohm's law experiment lab report pdf. Current resistance and ohm's law
lab report pdf. How to remember ohm's law. What is ohm's law pdf.

Ohm’s law is the fundamental law of Electrical Engineering. It relates the current flowing through any resistor to the voltage applied to its ends.
According to the statement: The current flowing through a constant resistor is directly proportional to the voltage applied to its ends. This article presents the complete Ohm’s law Lab report and various questions regarding the lab. The latter portion simplifies the law for beginners by delineating the absolute basic concepts for beginners. Objectives
of Ohms Law Lab report To verify that voltage and current are directly proportional using a 1kΩ resistor. List of Components Variable DC Power supply 1kΩ resistor (Color code Brown, Black, Red, Gold) Breadboard Connecting wires (Jumper wires) Ammeter Circuit Diagram Setup the circuit diagram as shown below: Steps Implement the circuit on
the breadboard as shown in circuit diagram. Initially set the VDC supply to 0 V and note the current on ammeter. Increase the voltage to 1 V, observe the ammeter and note the readings. Repeat the above step for 2 V, 3V … 10 V. Plot a graph for measured readings. Compare the plot with theoretical calculations. Observation table Make two columns
(the third one for Sr. no is optional). Calculations [Verification of Ohm’s law report] The theoretical calculations are achieved from the original formula, V = IR. You can also verify them from the basic Ohm’s law calculator. Graph for Ohm’s Law Lab report The real (practically calculated – red color) vs the theoretical values (blue) are plotted on the
graph.

While most theoretical values are identical to practical values, one might note a difference of red dot for 2.99 mA and 6.99 mA. Conclusion from Ohm’s Law lab Report We learned that current and voltage hold a direct relationship for resistive components. (They are linearly proportional). Basic Questions for Ohm’s Law Lab Report Question: What is
Variable DC supply? Answer: A variable DC (direct current) supply provides variable output voltages. It contains a rotary knob which can be rotated to achieve our desired output voltages. Its symbol is similar to dc battery with the difference of an arrowhead over it. Question: What is ammeter? Answer: It is the current measuring instrument which is
used in series to the circuit. It measures current and displays the amperes on LCD. Question: What is the resistor, and what is resistor color coding?

Answer: Resistor is an electrical component which is used to control the flow of electrical current. Carbon resistors are the most commonly available type of resistors.

They have color bands over their bodies which are used to identify the amount of resistance they possess. Question: What are jumper wires?
Answer: They are special types of wires which can be easily mounted and used on the breadboards. Question: Is Ohm’s Law important to learn? Answer: Yes Ohm’s law is a fundamental law of Electrical Engineering and it’s very important. You can easily learn each and everything about the law from our website. Question: Why practical results are
different from theoretical results? Answer: While no scientific-practical can perfectly match the theory, the actual results depend on environmental conditions, the accuracy of equipment under test. The quality of resistor also impacts the measurements, while in our lab report we got excellent results, you might get different results based on your
theory. To study electronics, we all need to have an idea of Ohm's law.
The main reason is that we have to take direct help from this law for various tasks. We also have to use this law to confirm information about different components.Verification of Ohm's law is an essential experiment for all beginners. Using this lab experiment, a student can learn how to set up the environment for an investigation and take the
reading of different meters. This article will find the entire lab report of Ohm's law verification with a proper data table, circuit diagram, graph, and PDF file.Objective:The objective of the experiment is to verify that the current and voltage are directly proportional using a 1 KΩ register.[Note: In some institutions, this resistor is the same for every
student but most of the time this resistor value is random. The teacher or lab administrator passes a random resistor for each student to prevent copying the data table and calculation section. My recommendation is to understand the main theory and experiment process so that you can do this by yourself.]Theory:Ohm's law: "The current through a
conductor between two points is directly proportional to the voltage across the two points when the temperature is stable."If the current through a conductor is 'I' and the potential difference between two endpoints of that conductor (also known as voltage) is 'V,' then according to Ohm's law:V ∝ IOr, (V/I) = constant = R [Here, R stans for the
resistance]Or, V=IRTo verify Ohm's law, we have to find out the changes in current when different voltages are applied.List of components:Here is a list of ingredients used in this experiment.Variable dc power supplyResistorJumper wireBreadboardAmmeterVoltmeterCalculatorCircuit Diagram:Here is the circuit diagram for the verification
experiment.Steps:Set the circuit on the breadboardInitially, set the variable DC power supply to 0 volts and take note of the ammeterIncrease the voltage and take note of both voltmeter and ammeterAnalyze results from the data table created by the notesData Table:Here is the data table of different readings of voltmeter and ammeter. Sl No.Voltage
(V)Current (I)10 V0 mA21 V0.95 mA32 V1.94 mA43 V2.90 mA54 V3.55 mA65 V4.67 mA76 V5.98 mA87 V6.70 mA98 V7.85 mA109 V8.56 mA1110 V9.58 mA Graph:Here is the chart from the data table:Result:We can see different readings in the data table. Here is some test calculation to determine resistance from the voltage and current reading. Sl
No.V/IR10/01KΩ21/0.951.052≈1KΩ32/1.941.030≈1KΩ43/2.901.034≈1KΩ54/3.551.126 or, 1KΩFrom the calculation, we can see that the resistance is always near the resistor we used in this experiment.Conclusion:From the experiment, we can see that the current and the voltage were proportional. From the graph, we can see that when voltage
increase, the current also increases.
According to Ohm's law, the current through a conductor between two points is directly proportional to the voltage across the two points. This experiment shows that the current and voltage are proportional, which proves that Ohm's law is correct.References:References should be added in a lab report. Because most of the time you follow some
theory, guidline by seniors, already stublished papers etc. So, it is better to notify/highlight that where you found the informations form.Here are the references of different sources we followed:Ohm's law Wikipedia pageOhm's Law doc by Michigan State UniversityHere is the PDF Download (google drive) link for Verification of Ohm's Law Lab Report
Academia.edu uses cookies to personalize content, tailor ads and improve the user experience. By using our site, you agree to our collection of information through the use of cookies. To learn more, view our Privacy Policy.