TH842C

Rough Terrain Telescopic Boom

Material Handler

FEATURES

• 8,000 lb. (3629 kg) capacity • Pressure compensated on-demand • Front axle differential lock, rear axle
25 ft. (7.6 m) reach hydraulics, 10 micron filtration lock up
42 ft. (12.8 m) of lift
• Motion control valves in the lift, boom, • Removable gauge panel
• Patented SQUARE SHOOT full load fork and sway circuits
chart level traverse system optional • SAE O-ring or JIC hydraulic connections
• Turbo-charged diesel engine, 3-speed
• Smooth three section roller boom Powershift transmission
• One high quality joy stick controller • 4-wheel drive, 4-wheel (2-wheel &
handles all boom and fork functions oblique) power steering
• Self-leveling forks with no separate
slave cylinder
• Oil cooled totally enclosed service brakes
simple, available and
• Fast, responsive high angle steering
• Planetary axles front and rear, 1300 x 24
12-ply tires
cost effective™
Machines shown may have optional equipment.
TEREX TH842C SPECIFICATIONS
WEIGHTS with Boom retracted and down
On Front Axle 8,300 lbs. (3764 kg)
On Rear Axle 14,200 lbs. (6440 kg)
TOTAL 22,500 lbs. (10 204 kg)
DIMENSIONS with Boom retracted and down
Width OVERALL 8' 6" (2.59 m)
Height OVERALL 9' 1" (2.77 m)
Length OVERALL 24' (7.32 m)
Wheel Base 10' 10" (3.30 m)
Ground Clearance 1' 5" (.43 m)
Turning Radius (outside tire) 14' 9" (4.50 m)
ENGINE
Make John Deere Turbo-charged
Model 4045T
Power 99 HP (73.8 kW)
RPM 2500
Fuel Tank Capacity 30 Gals. (113.6 L)
TRANSMISSION
Powershift/Converter 3 Speed
BRAKES - Parking
Type Spring Applied/Hydraulic
Release Disc
Location Front Axle Input Shaft
BRAKES - Service Manufacturer's recommended capacity is per ANSI B56.6
Type Enclosed, Hydraulic, Multiplate,
Oil Cooled
Location Internal STANDARD EQUIPMENT
AXLES Heavy Duty Steering Planetaries Single controller for all boom and fork functions • Heavy duty 3 section
WHEELS AND TIRES (Interchangeable) boom • Self-leveling fork frame • 2" x 5” x 48" (5.1 cm x 12.7 cm x
Wheels Heavy Duty Drop Center 1.22 m) forks • Motion control valves in the lift, fork, extend and frame
Tires - Calcium Chloride 1300 x 24 - 12 Ply leveling circuits • Pilot operated on-demand hydraulics • 10 micron return
Solution Filled hydraulic filter • 99 HP John Deere Turbo-charged engine • Dry type air
TRAVEL SPEEDS - Forward and Reverse cleaner • Dirt and water fuel filtration • 31.5 (1,000 CCA @ 0°F) battery
First 3.2 MPH (5.1 km/hr) • 95 AMP alternator • 3 speed Powershift transmission with a service
Second 6.9 MPH (11.1 km/hr) brake and parking brake activated clutch cutoff • 2 heavy duty steering
Third 17.2 MPH (27.7 km/hr) planetary axles • 4 wheel (2 wheel & oblique) power steering
STEERING • 1300 x 24 12-ply tires • SAHR parking brake • Enclosed multiplate oil-
Power Hydraulic Orbitrol cooled service brakes/accumulator backup • 10° either side of center
Modes 2 Wheel, 4 Wheel & Oblique frame leveling with indicator • Lockable fuel and hydraulic tank caps
HYDRAULICS
• Hourmeter • Removable gauge panel with surface-mounted breakers
Single Pump Axial Piston • Gauges for: fuel level, transmission oil temperature, transmission clutch
(unloaded during engine start) pressure, engine oil pressure, engine coolant temperature and electrical
Type Flow on Demand system voltage • Keyed start switch • Adjustable upholstered seat with seat
Filtration 10 Micron belt • Back up alarm and rear view mirror • Hydraulic pressure connections
Reservoir Capacity 34 Gals. (128.7 L) are SAE O-ring or JIC • Pins are hardened and ground, bushings are of
SWAY CONTROL - Frame Leveling high compressive strength material • Hardware is grade 8 • Front axle
Type Twin, Circuit Isolated, Cylinders differential lock • Rear axle lock • ISO mounted canopy
Range 10° Either Side of Center
OPTIONAL EQUIPMENT
EXTENSION BOOM 3 Section Roller
Hydromechanical Level Traverse System • Fully enclosed cab • Dual
AUTOMATION joystick controls • Heater • Defroster fan • Wiper • Turn signal & hazard
Type Hydromechanical
flasher package • Cubing tines • Rubbish bucket (1 yard) • 60" and 72"
Operation One Controller
(1.52 m and 1.83 m) pallet forks • 60" - 72" (1.52 m - 1.83 m) wide fork
Fork Function Self-leveling Throughout Lift/
Lower Cycles and No Separate
frame • Lights: Headlights, brake, tail, rear flood and strobe • Foam-
Slave Cylinder filled tires • Severe duty tires • Rotating fork frame 48", 60", and 72"
Traverse Function (Optional) Level Traverse at any Boom (1.22 m, 1.52 m, and 1.83 m) • 45° Swing fork frame 60” & 72”
Angle/Extension up to full (1.52 m and 1.83 m) • Variable reach truss boom • Cummins B3.9 C-99
Cylinder Stroke Turbo-charged diesel engine • Quik-Switch Attachment • Auxiliary
FRAME STABILIZATION hydraulics • Suspension seat • Front window with or without guard
Type Rear Axle Lock-up • Ether aid • Block heater
Operation Twin cylinders mounted between We reserve the right to amend these specifications at any time without notice.
frame and axle actuated by The only warranty applicable is our standard written warranty applicable to the
stepping on service brake, particular product and sale. We make no other warranty, expressed or implied.
shutting engine off, or 60°
boom angle

For more information, product demonstration, or details on lease and rental

plans, please contact your local Terex Construction Distributor.
TEREX CONSTRUCTION AMERICAS
455 N. Superior Ave. • Baraga, MI 49908-0790 USA
906-353-6675 • Fax: 906-353-7543
E-mail: [email protected]

TH-101-3 Litho in U.S.A. 10S103N70