Scribd Logo
Upload

Welcome to Scribd!

  • 459 views

    SSGC Test MCQS For Electrical and Electronics

    Uploaded by

    koi nai
    The document contains 35 multiple choice questions from an electrical and electronics test conducted by NTS on December 27th, 2015. The questions cover topics such as root mean square values, early programmable logic controllers, bandwidth, robotics, sources of non-linearity, n-type and p-type field effect transistors, ladder logic, resonance in RLC circuits, operational amplifiers, integrated circuit characteristics, asynchronous transfer mode switches, Faraday's law of induction, field effect transistors, stepper motors, Maxwell's equations, and modulation techniques.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    SSGC Test MCQS For Electrical and Electronics

    Uploaded by

    koi nai
    459 views5 pages
    The document contains 35 multiple choice questions from an electrical and electronics test conducted by NTS on December 27th, 2015. The questions cover topics such as root mean square values, early programmable logic controllers, bandwidth, robotics, sources of non-linearity, n-type and p-type field effect transistors, ladder logic, resonance in RLC circuits, operational amplifiers, integrated circuit characteristics, asynchronous transfer mode switches, Faraday's law of induction, field effect transistors, stepper motors, Maxwell's equations, and modulation techniques.

    Original Title

    SSGC Test MCQS for Electrical and Electronics

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document contains 35 multiple choice questions from an electrical and electronics test conducted by NTS on December 27th, 2015. The questions cover topics such as root mean square values, early programmable logic controllers, bandwidth, robotics, sources of non-linearity, n-type and p-type field effect transistors, ladder logic, resonance in RLC circuits, operational amplifiers, integrated circuit characteristics, asynchronous transfer mode switches, Faraday's law of induction, field effect transistors, stepper motors, Maxwell's equations, and modulation techniques.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    459 views5 pages

    SSGC Test MCQS For Electrical and Electronics

    Uploaded by

    koi nai
    The document contains 35 multiple choice questions from an electrical and electronics test conducted by NTS on December 27th, 2015. The questions cover topics such as root mean square values, early programmable logic controllers, bandwidth, robotics, sources of non-linearity, n-type and p-type field effect transistors, ladder logic, resonance in RLC circuits, operational amplifiers, integrated circuit characteristics, asynchronous transfer mode switches, Faraday's law of induction, field effect transistors, stepper motors, Maxwell's equations, and modulation techniques.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 5

    SSGC Test MCQS for Electrical and Electronics

    Test conducted by NTS on 27th December 2015


    1. Which of the following is a product of root mean square (rms) value of applied voltage
    and current?
    a. Reactive power
    b. Virtual power
    c. Active power
    d. Apparent power

    2. Which of following is used in Early PLC?


    a. Random Access Memory (RAM)
    b. Read Only Memory (ROM)
    c. Magnetic memory
    d. All of above

    3. B.W can be increase by use of ____ network?


    a. Phase lag
    b. Phase lead
    c. Mesh
    d. None

    4. ____ Type of robotics is done for repetitive jobs?


    a. 1
    b. 3
    c. 2
    d. 4

    5. ____ Type of robotics is done for Menial task.


    a. 2
    b. 1
    c. 3
    d. 4

    6. Which of the following source of non-linearity?


    a. Backlash in gear
    b. Saturation in effective in amplified
    c. Threshold in season
    d. All of above

    7. The Graphical difference in between nFET and pFET:


    a. Inversion in bubble of drain
    b. Inversion in bubble of source
    c. Inversion in bubble of gate
    d. All of above

    8. In PLC each program line is called


    a. Rung
    b. Step
    c. Line
    d. All

    9. In PLC ____ is replaced by


    a. Motor
    b. Machine
    c. Relay
    d. All

    10. The program for early PLC was in


    a. Boolean algebra
    b. Ladder logic
    c. Arithmetic logic
    d. All of above

    11. The optical fibre is mostly depend ____ at with optical fibre receiver
    a. Dark current
    b. Thermal
    c. Quantum
    d. All of above

    12. The multiple broadband of signal is Tobe transmitted over single mode fibre is:
    a. Time division multiplexing TDM
    b. Wavelength division multiplexing WDM
    c. Frequency division multiplexing FDM
    d. Subscriber

    13. The p.f in inductive reactance of circuit is called


    a. P.F
    b. Active factor
    c. Reactive factor
    d. Apparent factor

    14. The power factor is reciprocal to:


    a. Inductive factor
    b. Gain factor
    c. Q factor
    d. Inductive factor

    15. The net reactance is ____ when RLC Circuit is in resonance:


    a. Infinity
    b. Zero
    c. Less than zero
    d. Greater than zero

    16. The circuit current is _____ at resonance


    a. Minimum
    b. Maximum
    c. Zero
    d. Infinity

    17. The ______ is maximum when RLC circuit is in the resonance:


    a. Inductive current
    b. Capacitive voltage
    c. Power dissipation
    d. None of above

    18. The DC operating point of an amplifier specified by the voltage and the current value is
    called
    a. Q point
    b. Load line
    c. Gain
    d. None of above

    19. The power which is actually dissipated in resistor is called


    a. Reactive power
    b. Virtual power
    c. Active power
    d. Apparent power

    20. The Characteristics of ASIC is/are


    a. Propagation delay
    b. Capacitive
    c. Inductive
    d. All of above

    21. In the ATM switches are in the connected


    a. Network to network
    b. Port to port
    c. Port to network
    d. None of above

    22. The Faraday’s law determine _____ of induced EM

    23. The one of the drawback of JFET

    a. Noise
    b. Harmonics
    c. Transient
    d. None

    24. The field effect transistor are beneficial due to the:

    25. The VI characteristics of UJT is:

    26. The transformer ratio 20:1 indicate:


    a. Primary 20 turn and secondary one turn
    b. Primary 1/20th of second

    27. The Flag register in the 8051 used for:


    a. Program status register
    b. Bit status
    c. Location of data
    d. All of above

    28. The pointer which cannot be used in the register indirect addressing mode
    a. BX
    b. BP
    c. SI
    d. DI
    e. AX

    29. The 0110 is a starting of stepper then four step sequence of stepper motor
    a. 0110 0011 1001 0101
    b. 0110 1100 0110 1010
    c. 1100 0011 0101 1101

    30. Which statement is not true for 8086 microprocessor


    a. 16-bit ALU
    b. 16-bit address bus
    c. 16-bit flag register
    d. 16-bit internal register
    e. 16-bit instruction set
    31. The Maxwell equation is a
    a. Differential
    b. Algebraic
    c. Linear

    32. The Electromagnetic field and current are concentrated close to the surface of the
    conductor. The phenomena is called:
    a. Hall’s effect
    b. Skin effect
    c. Electric effect
    d. Magnetic effect

    33. The modulation technique in which the carrier is in the switch in between 0 and 1
    a. ASK
    b. Phase modulation
    c. ON-OFF keying
    d. QAM

    34. The UJT called _____ diode


    a. Low resistor
    b. Single resistor based
    c. High resistor
    d. Double based

    35. DIAC is a ____ layer device


    a. 2-layer
    b. 3-layer
    c. 4-layer

    You might also like