Scribd
Upload
27 views13 pages

LL Tulang

The document contains code for several Arduino projects: 1) Code to display text and temperature readings on an LCD screen 2) Code to blink an LED based on a number input through the serial monitor 3) Code to light different combinations of LEDs by toggling pins on and off

Uploaded by

labelektro hek
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
27 views13 pages

LL Tulang

The document contains code for several Arduino projects: 1) Code to display text and temperature readings on an LCD screen 2) Code to blink an LED based on a number input through the serial monitor 3) Code to light different combinations of LEDs by toggling pins on and off

Uploaded by

labelektro hek
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 13

#include <LiquidCrystal.

h>
LiquidCrystal lcd(0, 1, 2, 3, 4, 5);
void setup()
{
lcd.begin(16, 2);
}
void loop()
{
lcd.setCursor(0,0);
lcd.print("SYAHDHAN FAHREZA");
lcd.setCursor(0,1);
lcd.print("217002516015");
}
#include <LiquidCrystal.h>
const int pSuhu = A0;
float suhu, data;
LiquidCrystal lcd(2, 3, 4, 5, 6, 7);
void setup()
{
lcd.begin(16,2);
lcd.print("SYAHDHAN FAHREZA");
}
void loop()
{
data = analogRead(pSuhu);
suhu = data / 1024 * 110;
lcd.setCursor(0,1);
lcd.print("Suhu :");
lcd.print(suhu);
lcd.print(" C ");
delay(1000);
}
const int buttonSaya = 6;
const int ledSaya1 = 3;
const int ledSaya2 = 4;
int buttonStatusSaya = 0;
void setup()
{
pinMode(ledSaya1, OUTPUT);
pinMode(ledSaya2, OUTPUT);
pinMode(ledSaya3, OUTPUT);
pinMode(buttonSaya, INPUT);
}
void loop()
{
buttonStatusSaya = digitalRead(buttonSaya);
if (buttonStatusSaya == HIGH)
{
digitalWrite(ledSaya1, HIGH);
digitalWrite(ledSaya2, HIGH);
}
else
{
digitalWrite(ledSaya1, LOW);
digitalWrite(ledSaya2, LOW);
}
}
int x, angka;
int led=2;
void setup()
{
Serial.begin(9600);
pinMode(led,OUTPUT);
Serial.println("LED berkedip");
Serial.print("kedipan : ");
}
void loop()
{
while(Serial.available()==0)
{}
angka=Serial.read()-'0';
Serial.println(angka);
for (x=1; x<=angka; x++)
{
digitalWrite(led, HIGH);
delay(200);
digitalWrite(led, LOW);
delay(200);
}
angka=0;
Serial.print("kedipan : ");
Serial.flush();
}
#include <LiquidCrystal.h>
const int pot0 = A0;
int adc1 = 0;
const int rs = 0,rw = 1, en = 2, d4 = 3, d5 = 4, d6 = 5;
LiquidCrystal lcd(rs, rw, en, d4, d5, d6);
void setup()
{
lcd.begin(16, 2);
lcd.setCursor(0,0);
lcd.print("BACA NILAI ADC");
}
void loop()
{
adc1 = analogRead(pot0);
lcd.setCursor(0,1); lcd.print("NILAI ADC 1="); lcd.print(adc1);
delay (200);
}
S
int b1 = 13;
int b2 = 12;
int b3 = 11;
int b4 = 10;
int b5 = 9;
int b6 = 8;
int b7 = 7;
int k1 = 2;
int k2 = 3;
int k3 = 4;
int k4 = 5;
int k5 = 6;

void setup() {
pinMode(b1,OUTPUT);
pinMode(b2,OUTPUT);
pinMode(b3,OUTPUT);
pinMode(b4,OUTPUT);
pinMode(b5,OUTPUT);
pinMode(b6,OUTPUT);
pinMode(b7,OUTPUT);
pinMode(k1,OUTPUT);
pinMode(k2,OUTPUT);
pinMode(k3,OUTPUT);
pinMode(k4,OUTPUT);
pinMode(k5,OUTPUT);
}
void loop() {
digitalWrite(b1,1);
digitalWrite(b2,0);
digitalWrite(b3,0);
digitalWrite(b4,0);
digitalWrite(b5,0);
digitalWrite(b6,0);
digitalWrite(b7,0);
digitalWrite(k1,1);
digitalWrite(k2,0);
digitalWrite(k3,0);
digitalWrite(k4,0);
digitalWrite(k5,1);
delay(5);

digitalWrite(b1,0);
digitalWrite(b2,1);
digitalWrite(b3,0);
digitalWrite(b4,0);
digitalWrite(b5,0);
digitalWrite(b6,0);
digitalWrite(b7,0);
digitalWrite(k1,0);
digitalWrite(k2,1);
digitalWrite(k3,1);
digitalWrite(k4,1);
digitalWrite(k5,0);
delay(5);
digitalWrite(b1,0);
digitalWrite(b2,0);
digitalWrite(b3,1);
digitalWrite(b4,0);
digitalWrite(b5,0);
digitalWrite(b6,1);
digitalWrite(b7,0);
digitalWrite(k1,0);
digitalWrite(k2,1);
digitalWrite(k3,1);
digitalWrite(k4,1);
digitalWrite(k5,1);
delay(5);

digitalWrite(b1,0);
digitalWrite(b2,0);
digitalWrite(b3,0);
digitalWrite(b4,1);
digitalWrite(b5,0);
digitalWrite(b6,0);
digitalWrite(b7,0);
digitalWrite(k1,1);
digitalWrite(k2,0);
digitalWrite(k3,0);
digitalWrite(k4,0);
digitalWrite(k5,1);
delay(5);

digitalWrite(b1,0);
digitalWrite(b2,0);
digitalWrite(b3,0);
digitalWrite(b4,0);
digitalWrite(b5,1);
digitalWrite(b6,0);
digitalWrite(b7,0);
digitalWrite(k1,1);
digitalWrite(k2,1);
digitalWrite(k3,1);
digitalWrite(k4,1);
digitalWrite(k5,0);
delay(5);

digitalWrite(b1,0);
digitalWrite(b2,0);
digitalWrite(b3,0);
digitalWrite(b4,0);
digitalWrite(b5,0);
digitalWrite(b6,1);
digitalWrite(b7,0);
digitalWrite(k1,0);
digitalWrite(k2,1);
digitalWrite(k3,1);
digitalWrite(k4,1);
digitalWrite(k5,0u);
delay(5);

digitalWrite(b1,0);
digitalWrite(b2,0);
digitalWrite(b3,0);
digitalWrite(b4,0);
digitalWrite(b5,0);
digitalWrite(b6,0);
digitalWrite(b7,1);
digitalWrite(k1,1);
digitalWrite(k2,0);
digitalWrite(k3,0);
digitalWrite(k4,0);
digitalWrite(k5,1);
delay(5);
}
F
int b1 = 13;
int b2 = 12;
int b3 = 11;
int b4 = 10;
int b5 = 9;
int b6 = 8;
int b7 = 7;
int k1 = 2;
int k2 = 3;
int k3 = 4;
int k4 = 5;
int k5 = 6;
void setup() {
pinMode(b1, OUTPUT);
pinMode(b2, OUTPUT);
pinMode(b3, OUTPUT);
pinMode(b4, OUTPUT);
pinMode(b5, OUTPUT);
pinMode(b6, OUTPUT);
pinMode(b7, OUTPUT);
pinMode(k1, OUTPUT);
pinMode(k2, OUTPUT);
pinMode(k3, OUTPUT);
pinMode(k4, OUTPUT);
pinMode(k5, OUTPUT);
}
void loop() {
digitalWrite(b1, HIGH);
digitalWrite(b2, HIGH);
digitalWrite(b3, HIGH);
digitalWrite(b4, HIGH);
digitalWrite(b5, HIGH);
digitalWrite(b6, HIGH);
digitalWrite(b7, HIGH);
digitalWrite(k1, LOW);
digitalWrite(k2, HIGH);
digitalWrite(k3, HIGH);
digitalWrite(k4, HIGH);
digitalWrite(k5, HIGH);
delay(1);
digitalWrite(b1, HIGH);
digitalWrite(b2, LOW);
digitalWrite(b3, LOW);
digitalWrite(b4, HIGH);
digitalWrite(b5, LOW);
digitalWrite(b6, LOW);
digitalWrite(b7, LOW);
digitalWrite(k1, HIGH);
digitalWrite(k2, LOW);
digitalWrite(k3, LOW);
digitalWrite(k4, LOW);
digitalWrite(k5, HIGH);
delay(1);}

You might also like