Tonal Harmony - Stefan Kostka - Chapter 5 - Principles of Voice Leading

Download as pdf or txt
Download as pdf or txt
You are on page 1of 15

Part Two Diatonic Triads

Chapter Five
Principles of
Voice Leading
Introduction
The compositional process, being a creative one, is not entirely understood. It is reasonable
to assume that a composer thinks of several aspects more or less simultaneously—melody,
harmony, rhythm, and so on. Naturally, a complete analysis of a composition must take all
these factors into account. For the most part, however, this text concentrates on questions
relating to the harmonic aspect of tonal music because it is this aspect that most clearly
delineates tonal music from other types.
We could say that the basic vocabulary of tonal harmony consists of triads
and seventh chords and that its grammar involves the ways in which these chords are
selected (harmonic progression) and connected (voice leading). In this chapter and
the next, we will concentrate on some of the basics of the voice-leading aspect: How
does a composer write out a given succession of chords for some combination of per-
formers? How does he or she decide in which direction each vocal or instrumental line
should go?
Voice leading (or part writing) may be defined as the ways in which chords are
produced by the motions of individual musical lines. A closely related term is counterpoint,
which refers to the combining of relatively independent musical lines. Naturally, the
style of voice leading will depend on the composer, the musical effect desired, and the
performing medium (for example, it is easier to play a large melodic interval on the piano
than it is to sing it). However, there are certain voice-leading norms that most tonal com-
posers follow most of the time, and our study will concentrate on these norms.

The Melodic Line


Our beginning exercises will make use of short and simple melodies in vocal style in order
to avoid, for now, the complications involved with more ornate vocal and instrumental
melodies. The following procedures should be followed for Chapters 5 through 9.
1. Rhythm. Keep the rhythm simple, with most durations being equal to or longer than
the duration of the beat. The final note should occur on a strong beat.

66
The Melodic Line 67

2. Harmony. Every melody note should belong to the chord that is to harmonize it.
3. Contour. The melody should be primarily conjunct (stepwise). The shape of the
melody should be interesting but clear and simple, with a single focal point, the
highest note of the melody.

Example 5-1a is a good example of the points discussed so far. Example 5-1b is not as
good because it has an uninteresting contour. Example 5-1c, although more interesting,
lacks a single focal point and contains one incorrectly harmonized tone (E5).

Example 5-1

4. Leaps.
a. Avoid augmented intervals, 7ths, and intervals larger than a P8. Diminished in-
tervals may be used if the melody changes direction by step immediately after the
interval.
b. A melodic interval larger than a P4 is usually best approached and left in the direc-
tion opposite to the leap.
c. When smaller leaps are used consecutively in the same direction, they should out-
line a triad.
5. Tendency tones. In tonal music, 7̂ has a strong tendency to move up to 1̂. An exception
to this is the scalewise line descending from 1̂: 1̂ – 7̂– 6̂ – 5̂. The only other tendency tone
that needs to be considered is 4̂, which often moves down to 3̂, but not with the regular-
ity with which 7̂ goes to 1̂.
Example 5-2a illustrates a good melody in the restricted style with which we are begin-
ning. Example 5-2b, on the other hand, breaks all of rule 4, as well as rule 5.
68 Chapter Five Principles of Voice Leading

Example 5-2

The melodic style we have outlined in the previous pages is admittedly a very restricted
one, but it is a good place to start. Melodies such as these can be found in hymn tunes, for
instance, as in the next two examples. In Example 5-3, we show part of one such melody,
along with Handel’s harmonization.

Example 5-3 Melody from the Gross Kirchen Gesangbuch (1596)

Part of another simple melody, composed by Johann Crüger and harmonized by K. H.


Graun, is seen in Example 5-4.

Example 5-4 Crüger, Herzliebster Jesu, was hast du

Even a more elaborate melody has a simpler background that may resemble the style of
melodies we have been talking about. Example 5-5a illustrates the framework behind the
original in Example 5-5b. Because Example 5-5b is an elaboration, it contains notes that do
not belong to the underlying chords.

Example 5-5 Bach, French Suite no. 3, Gigue


05 EX 5-5.mp3
Notating Chords 69

Self-Test 5-1
(Answers appear in Appendix D.) (p. 576)

A. Criticize each melody in terms of the rules for simple melodies discussed under “The
Melodic Line.” (pp. 66–68)

B. Compose simple melodies that will conform to the given progressions. Slashes
represent bar lines, and every chord except the last takes one beat.
1. D: I V I / IV I I / vi ii V / I //
2. e: i iv i i / V V i i / iv V i //
3. F: I V vi IV / I IV ii V / I //

Exercise 5-1 See Workbook.

Notating Chords
A musical score is a tool used by a composer, conductor, or analyst. A score shows all
the parts of an ensemble arranged one above the other, enabling the experienced reader to
“hear” what the composition will sound like. In a full score, all or most of the parts are
notated on their own individual staves. Any musician should be able both to read and to
70 Chapter Five Principles of Voice Leading

prepare a full score, and some of your theory exercises should be done in full score. How-
ever, a reduced score, notated at concert pitch on as few staves as possible, might be more
practical for daily theory exercises. Your choice of full or reduced score will depend partly
on the sort of musical texture that the exercise will use. That is, if you are composing for
four parts in chorale style, two staves will probably suffice. On the other hand, four active
and independent instrumental lines might require four staves.
When you are notating more than one part on a single staff, be sure that the stems of
the top part always point up and those of the bottom point down, even if the parts have
crossed. Example 5-6 illustrates some common notational errors. The score in this case is
the familiar SATB (Soprano, Alto, Tenor, Bass) reduced score.

Example 5-6

Voicing a Single Triad


After you have settled on the combination of instruments and voices for which you are
writing and have selected the opening chord, the next consideration is voicing: how the
chord is to be distributed or spaced. The way in which a chord is spaced has a great deal
of influence on its aural effect. To convince yourself of this, play Example 5-7 at the piano.
Each chord in the example contains five parts and covers the same range, but the aural
effects are quite different. An even wider variety of effects could be obtained by playing
Example 5-7 on various combinations of instruments. Although each of these spacings
might be appropriate under certain circumstances, the spacing in Example 5-7e is the least
commonly used because of its “muddy” effect.

Example 5-7

Because so much attention has been paid to four-part textures by authors of harmony texts,
a terminology concerning the voicing of chords in four-part textures has been developed:
Voicing a Single Triad 71

Close structure: less than an octave between soprano and tenor


Open structure: an octave or more between soprano and tenor
Example 5-8 illustrates these spacings in traditional hymn style.

Example 5-8 “Old One Hundredth” (Protestant hymn)


05 EX 5-8.mp3

In your beginning part-writing exercises, it would be advisable for you to follow two sim-
ple conventions concerning spacing.
1. Crossed voices. Do not allow any part to cross above the soprano or below the
bass because the essential soprano/bass counterpoint might become unclear (see
Example 5-9). The alto and tenor lines may cross briefly if there is a musical reason
to do so (see Example 5-10).

Example 5-9

Example 5-10 Bach, Gott, der du selber bist das Licht


05 EX 5-10.mp3
72 Chapter Five Principles of Voice Leading

2. Spacing. When writing for three or more parts, avoid overly spacious sonorities by
keeping adjacent upper parts (excluding the bass) within an octave of each other. For
example, in a four-part texture, there should be no more than an octave between so-
prano and alto (Example 5-11a) or between alto and tenor (Example 5-11b), although
there might be more than an octave between tenor and bass (Example 5-11c).

Example 5-11

After you have gained some experience in composing, you may begin to experiment with
exceptions to these conventions.
When you are composing for vocal ensembles, use the ranges given in Example 5-12.

Example 5-12

Self-Test 5-2
(Answers appear in Appendix D.) (p. 577)

A. Analyze the excerpt from a Bach chorale that follows, using roman numerals and bass
position symbols. Then, show beneath each roman numeral the structure of the chord
by writing “O” or “C” for open or close structure. The note in parentheses in m. 3 is
not part of the chord and should be ignored for the purpose of harmonic analysis.
Bach, Wo soll ich fliehen hin
05 ST 5-2A.mp3
Parallel Motion 73

B. Review the two conventions concerning spacing. Then, point out in the following
example any places where those conventions are not followed.

C. Fill in the circled missing inner voice(s) to complete each root position triad, being
sure that each note of the triad is represented. Follow the spacing conventions and stay
within the range of each vocal part.

Exercise 5-2 See Workbook.

Parallel Motion
As we shall see, in tonal music it is important to consider the relationships between any
voice in the texture and every other voice in the texture. When music progresses from one
chord to the next, there are five possible relationships between any two voices (or parts).
These are illustrated in Example 5-13.
74 Chapter Five Principles of Voice Leading

Example 5-13

When the texture contains more than two voices, there will be more “pairs” of voices to look
at. In a three-part texture, for instance, there are three pairs, as shown in Example 5-14.

Example 5-14

In a four-part texture, there are six such pairs, which can seem a little daunting at first, but
you will soon be expert at seeing them.
One of the basic goals of voice leading in tonal music is to maintain the relative inde-
pendence of the individual parts. Because of this, voices moving together in parallel mo-
tion must be given special attention. Look at Example 5-15 and you will see that it consists
of three versions of the i-V-i progression in the key of b. Each version uses the same chords,
and each version contains parallel voice leading (indicated by the diagonal lines in the
example). However, only one version, Example 5-15c, would be considered acceptable by a
composer of tonal music.

Example 5-15

The reason that Examples 5-15a and 5-15b are unacceptable in the tonal style is that
they contain parallel 5ths and 8ves. Although such parallels regained acceptance in the
Parallel Motion 75

twentieth century, composers of tonal music generally followed the convention, dating
from around 1450, of avoiding parallel 5ths and 8ves as well as their octave equivalents,
such as 12ths and unisons. Note that this does not rule out the duplication of a line at
the 8ve, which was common in orchestral writing (for example, see Ex. 7-7, in which
the bass line is doubled at the 8ve between cellos and basses because the double basses
sound a P8 lower than written). The reason for avoiding parallel 5ths and 8ves has to do
with the nature of counterpoint. The P8 and P5 are the most stable of intervals, and to
link two voices through parallel motion at such intervals interferes with their indepen-
dence much more than would parallel motion at 3rds or 6ths. We can deduce a rule of
parallel motion:
Objectionable parallels result when two parts that are separated by a P5 or a P8, or by
their octave equivalents, move to new pitch classes that are separated by the same interval.
If you apply this rule to the three parts of Example 5-16, you will find that all of them
are acceptable. In Example 5-16a, the soprano and tenor do not move to new pitch classes,
whereas in Example 5-16b, the 5ths do not occur between the same pair of voices. Finally,
the parallel 4ths in Example 5-16c are allowed, even though a P4 is the inversion of a P5.
(Incidentally, remember that the unison is the octave equivalent of the P8, so parallel uni-
sons should also be avoided.)

Example 5-16

Contrary 5ths and 8ves (also called consecutive 5ths and 8ves by contrary motion) were
also generally avoided, at least in vocal music. This means that the composer usually did not
“correct” parallels (Ex. 5-17a) by moving one of the parts up or down an octave (Ex. 5-17b).

Example 5-17
76 Chapter Five Principles of Voice Leading

However, contrary octaves are occasionally found at cadences (harmonic goals) in instru-
mental music and especially in vocal writing, when both melody and bass outline 5̂–1̂.
You will see that this occurs in Example 5-18, below the arrow, but the listener probably
understands that A4 and G4 are the basic notes of the melody in mm. 7–8, whereas the
D4 is only a quick arpeggiation. Notice also in Example 5-18 that some of the notes are in
parentheses. In many of the examples in this book, notes that do not belong to the chord are
put in parentheses. Nonchord tones will be discussed in more detail in Chapters 12 and 13.

Example 5-18 Haydn, String Quartet op. 64, no. 4, II


05 EX 5-18.mp3

Unequal 5ths result when a P5 is followed by a °5, or the reverse, in the same two voices.
Apparently, some tonal composers avoided unequal 5ths involving the bass, and oth-
ers used P5-°5 but not °5-P5, yet neither of these restrictions holds true for tonal music
in general. For the purposes of our part-writing exercises, we will consider unequal 5ths
acceptable unless they involve a °5-P5 between the bass and another voice. Several sets of
unequal 5ths are illustrated in Example 5-19, with all but the last being acceptable.

Example 5-19
Parallel Motion 77

Direct (or hidden) 5th or 8ve results when the outer parts move in the same direction into
a P5 or P8, with a leap in the soprano part (with a leap or a step in the bass).
The aural result is similar to parallel 5ths and 8ves. In Examples 5-20a and 5-20b, the
interval of a P5 or P8 between the outer voices is approached from the same direction with
a leap in the soprano. In Example 5-20c, the 5th involves the bass and alto, not the bass
and soprano, whereas in Example 5-20d, the soprano moves by step, not by leap. Both
Examples 5-20c and 5-20d are correct.

Example 5-20

The avoidance of parallels of all types was somewhat less strictly maintained in instru-
mental than in vocal music. In piano writing, for instance, accompaniment figures fre-
quently outlined 5ths or 8ves, as in Example 5-21.

Example 5-21 Mozart, Piano Sonata K. 284, III


05 EX 5-21.mp3

In most cases, such instances of parallels are confined to those textures and instrumental
lines in which they are not obvious to the ear. When you attempt to compose music in the
tonal style, you should use parallel 5ths and 8ves very sparingly, if at all, and in such a way
that the listener’s attention will not be drawn to them. Parallels involving both of the outer
parts are especially rare and should be avoided. The few instances of such parallels, such
as in Example 5-22, do not contradict the general validity of the rule. Possibly Beethoven
was trying to evoke a rustic, unsophisticated atmosphere through the use of the parallels—
the example is, after all, from the beginning of the Pastoral Symphony.
78 Chapter Five Principles of Voice Leading

Example 5-22 Beethoven, Symphony no. 6, op. 68, I


05 EX 5-22.mp3

CHECKPOINT
1. What do we mean by the focal point of a melody?
2. What scale degree is the strongest tendency tone in tonal music?
3. In a four-voice texture, adjacent upper parts should be kept within what interval?
4. Under what circumstances are unequal 5ths unacceptable?
5. What are direct octaves?

Self-Test 5-3
(Answers appear in Appendix D.) (p. 578)

A. First, put lead-sheet symbols in the blanks above this example. Then, analyze the
motion between each of the pairs of voices and fill in the blanks using this system:
st = static o = oblique c = contrary s = similar p = parallel
Parallel Motion 79

1. Bass/Soprano
2. Bass/Alto
3. Bass/Tenor
4. Tenor/Soprano
5. Tenor/Alto
6. Alto/Soprano

B. Label the chords in the following excerpt with roman numerals. Then, label any
examples of parallelism (objectionable or otherwise) that you can find.
Bach, Ermuntre dich, mein schwacher Geist
05 ST 5-3B.mp3

C. Find and label the following errors in this example:


1. Parallel 8ves
2. Parallel 5ths
3. Direct 5th
4. Contrary 5ths
5. Spacing error (pp. 71–72)
80 Chapter Five Principles of Voice Leading

D. Find and label the following errors in this example:


1. Parallel 8ves
2. Parallel 5ths
3. Direct 8ve
4. Contrary octaves
5. Unacceptable unequal 5ths
6. Spacing error

Exercise 5-3 See Workbook.

Summary
Chords in tonal music are produced by the motions of individual musical lines, and the manipulation
of these lines is called voice leading or part writing. A closely related term is counterpoint, which
refers to the combining of relatively independent musical lines.
In your first exercises, you will use melodies that are relatively short and simple and that conform
to the suggestions given in The Melodic Line pp. 66–67, and you will usually notate your exercises
in reduced score rather than in full score. When two parts are notated on a staff, the stems of the
top part always point up, and those of the bottom point down.
Spacing is an important consideration in voicing chords. In four-part textures, the space between
the soprano and tenor parts categorizes a chord to be in close structure or open structure. Other
suggestions regarding spacing are given on pp. 71–72.
Parallel 5ths and 8ves are avoided in most contexts in tonal music because they undermine the
relative independence of the individual parts. Also generally avoided are contrary 5ths and 8ves
and, in certain circumstances, unequal 5ths and direct 5ths and 8ves. See pp. 73–78.

You might also like