Different Types of Sensors Used in Automobiles
Different Types of Sensors Used in Automobiles
in Automobiles
AUTOMOTIVE
SENSORS
0 COMMENT
mass-air-flow-sensor
Engine Speed Sensor
The engine speed sensor in the automobile can be connected to the
crankshaft. The main purpose of this sensor is to monitor the crankshaft’s
rotating speed. So that fuel injection & the engine timing can be controlled.
There are different ways for the vehicle engine to stop unexpectedly. So this
sensor will stop that for car drivers.
engine-speed-sensor
Oxygen Sensor
Located in the exhaust stream, usually near the exhaust manifold and after
the catalytic converter, the oxygen sensor (or O2 sensor) monitors the content
of exhaust gases for the proportion of oxygen. The information is compared to
the oxygen content of ambient air and is used to detect whether the engine is
running a rich fuel ratio or a lean one. The engine computer uses this
information to determine fuel metering strategy and emission controls.
oxygen-sensor
Spark Knock Sensor
The spark knock sensor is used to ensure whether the fuel is burning
smoothly, otherwise, it will cause an unexpected ignition. This ignition is very
dangerous which will cause damage in the engine of the car like damage of
rings, head gasket, and rod bearings. Fitting these parts can be costly. So this
sensor is used to save all the troubles occurred in an engine of the car.
spark-knock-sensor
Coolant Sensor
The coolant sensor is the most significant sensor used in automobiles.
Because the computer depends on the sensor inputs to control all the
functions. For instance, turn ON/OFF the EFE system (Early Fuel
Evaporation), retard, spark advance, the flow of EGR, and canister purge.
coolant-sensor
Generally, this sensor can be connected on the board. If the sensor is failed,
then there will be some indications stalling, like poor fuel mileage, etc. So, the
status of the sensor should be checked whether it is defective or not. If it is
damaged, then it will be a problem.
manifold-absolute-
pressure-sensor
Fuel Temperature Sensor
The fuel sensor is used to check the temperature of the fuel continually
whether the fuel utilization is optimum or not. If the fuel of the engine is cold,
then it will take much time to burn due to its high density. Similarly, if the fuel
is warm then it will take less time to burn. Here, the main problem is the inflow
varying levels. So this can injure other parts of an automobile. This sensor will
monitor the petroleum is injected at the right speed and temperature. So that
engine of the automobile works properly.
fuel-temperature-
sensor
Voltage Sensor
Voltage Sensor is one type of sensor used in automobiles. The main function
of this sensor is to manage the car speed and to make sure the speed of is
increased (or) decreased as required. So it is essential to have in your car.
voltage-sensor
Throttle Position Sensor
The throttle position sensor in automobile mainly uses feedback carburetion &
electronic fuel injection (EFI). It informs the computer regarding the throttle
opening rate as well as the position of the relative throttle. This sensor is a
variable resistor, which is used to change the resistance as the throttle opens.
throttle-position-sensor
It is not complex to identify the faulty throttle position sensor symptoms. As
there is a fall while speeding up, then you can identify the faulty of the sensor.
It is the major sign of a faulty throttle position sensor. Whenever you change
this sensor, you cannot adjust it properly.