Datasheet

TLP541G, TLP542G
TOSHIBA Photocoupler GaAs Ired & Photo-Thyristor
TLP541G,TLP542G
Programmable Controllers
AC−Output Module Unit in mm
Solid State Relay
The TOSHIBA TLP541G consists of a photo−thyristor optically coupled

to a gallium arsenide infrared emitting diode in a six lead plastic DIP
package.
The TOSHIBA TLP542G consists of a photo−thyristor optically coupled
to a gallium arsenide infrared emitting diode in a seven lead plastic DIP
package.
· Peak off-state voltage: 400 V (min.)

· Trigger LED current: 7 mA (max.)
· On-state current: 150 mA (max.)
· Isolation voltage: 2500 Vrms (min.)
· UL recognized: UL1577, file no. E67349
Pin Configuration (top view)
TOSHIBA 11−7A8
Weight: 0.4 g
TOSHIBA 11−10C5
Weight: 0.53 g
1 2002-09-25
TLP541G, TLP542G
Maximum Ratings (Ta = 25°C)
Characteristic Symbol Rating Unit
Forward current IF 70 mA
Forward current derating (Ta ≥ 25°C) ∆IF / °C -0.7 mA / °C

LED
Peak forward current (100 µs pulse, 100 pps) IFP 1 A

Reverse voltage VR 5 V
Junction temperature Tj 125 °C
Peak forward voltage (RGK = 27kΩ) VDRM 400 V
Peak reverse voltage (RGK = 27kΩ) VRRM 400 V
On-state current IT (RMS) 150 mA
Detector
On-state current derating (Ta ≥ 25°C) ∆IT / °C -2.0 mA / °C

Peak one cycle surge current ITSM 2 A
Peak reverse gate voltage VGM -5 V
Junction temperature Tj 100 °C
Storage temperature range Tstg -55~125 °C
Operating temperature range Topr -30~100 °C
Lead soldering temperature (10 s) Tsol 260 °C
Isolation voltage (AC, 1 min., R.H. ≤ 60%) (Note) BVS 2500 Vrms
(Note) Device considered a two terminal device: LED side pins shorted together and detector side pins shorted
together.
Recommended Operating Conditions
Characteristic Symbol Min. Typ. Max. Unit
Supply voltage VAC ― ― 120 Vac

Forward current IF 10 16 25 mA
Operating temperature Topr -30 ― 85 °C
Gate to cathode resistance RGK ― 27 33 kΩ
Gate to cathode capacity CGK ― 0.01 0.1 µF
2 2002-09-25
TLP541G, TLP542G
Individual Electrical Characteristics (Ta = 25°C)
Characteristic Symbol Test Condition Min. Typ. Max. Unit
Forward voltage VF IF = 10 mA 1.0 1.15 1.3 V

LED
Reverse current IR VR = 5 V ― ― 10 µA
Capacitance CT V = 0, f = 1 MHz ― 30 ― pF
VAK = 400 V Ta = 25°C ― 10 5000 nA

Off-state current IDRM
RGK = 27 kΩ Ta = 100°C ― 1 100 µA
VKA = 400 V Ta = 25°C ― 10 5000 nA

Reverse current IRRM
RGK = 27 kΩ Ta = 100°C ― 1 100 µA
Detector
On-state voltage VTM ITM = 100 mA ― 0.9 1.3 V

Holding current IH RGK = 27 kΩ ― 0.2 1 mA
Off-state dv/dt dv/dt VAK = 280 V, RGK = 27 kΩ 5 10 ― V/µs
V = 0, f = 1 MHz Anode to gate ― 20 ―

Capacitance Cj pF
Gate to cathode ― 350 ―
Coupled Characteristics (Ta = 25°C)
Characteristic Symbol Test Condition Min. Typ. Max. Unit
Trigger LED current IFT VAK = 6 V, RGK = 27 kΩ 1 4 7 mA

Turn-on time ton IF = 50 mA, RGK = 27 kΩ ― 10 ― µs
Capacitance
CS VS = 0, f = 1 MHz ― 0.8 ― pF
(input to output)
Isolation resistance RS VS = 500 V, R.H. ≤ 60% ― 1011 ― Ω
Isolation voltage BVS AC, 1 minute 2500 ― ― Vrms
3 2002-09-25
TLP541G, TLP542G
4 2002-09-25
TLP541G, TLP542G
5 2002-09-25
TLP541G, TLP542G
RESTRICTIONS ON PRODUCT USE 000707EAA
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
· The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
· The information contained herein is subject to change without notice.
6 2002-09-25

Datasheet

Uploaded by

Copyright:

Available Formats

Datasheet

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Datasheet

Uploaded by

Copyright:

Available Formats

TLP541G, TLP542G

TOSHIBA Photocoupler GaAs Ired & Photo-Thyristor

The TOSHIBA TLP541G consists of a photo−thyristor optically coupled

· Peak off-state voltage: 400 V (min.)

Pin Configuration (top view)

Characteristic Symbol Rating Unit

Forward current derating (Ta ≥ 25°C) ∆IF / °C -0.7 mA / °C

Peak forward current (100 µs pulse, 100 pps) IFP 1 A

On-state current derating (Ta ≥ 25°C) ∆IT / °C -2.0 mA / °C

Recommended Operating Conditions

Characteristic Symbol Min. Typ. Max. Unit

Supply voltage VAC ― ― 120 Vac

Characteristic Symbol Test Condition Min. Typ. Max. Unit

Forward voltage VF IF = 10 mA 1.0 1.15 1.3 V

VAK = 400 V Ta = 25°C ― 10 5000 nA

VKA = 400 V Ta = 25°C ― 10 5000 nA

On-state voltage VTM ITM = 100 mA ― 0.9 1.3 V

V = 0, f = 1 MHz Anode to gate ― 20 ―

Coupled Characteristics (Ta = 25°C)

Characteristic Symbol Test Condition Min. Typ. Max. Unit

Trigger LED current IFT VAK = 6 V, RGK = 27 kΩ 1 4 7 mA

RESTRICTIONS ON PRODUCT USE 000707EAA

· The information contained herein is subject to change without notice.

You might also like