Introduction & Aims

About ISPST

ISPST 2022 is the place where members of academics and industries in the field of
polymer science and technology all around the word gather not only to actively
participate in the scientific character of the conference but to enjoy the visit of the
third biggest city in Iran, Esfahan, where numerous tourist attraction places
including museums, memorials, cultural and historical sites can be found.
Department of Polymer Engineering at Isfahan University of Technology has the
great opportunity to host this event on 8 -10 November 2022.

The previous 14 seminars were:

• ISPST 2020, Tarbiat Modaress University , Tehran, Iran

• ISPST 2018, AmirKabir University of Technology, Tehran, Iran.
• ISPST 2016, Islamic Azad University, Tehran, Iran.
• ISPST 2014, Iran Polymer and Petrochemical Institute, Tehran, Iran.
• ISPST 2012, Amirkabir University of Technology, Tehran, Iran.
• ISPST 2009, Iran Polymer and Petrochemical Institute, Tehran, Iran.
• ISPST 2007, Sharif University of Technology, Tehran, Iran.
• ISPST 2005, Amirkabir University of Technology, Tehran, Iran.
• ISPST 2003, Iran Polymer and Petrochemical Institute, Tehran, Iran.
• ISPST 2000, Amirkabir University of Technology, Tehran, Iran.
• ISPST 1997, Iran Polymer and Petrochemical Institute, Tehran, Iran.
• ISPST 1994, Shiraz University, Shiraz, Iran.
• ISPST 1990, Amirkabir University of Technology, Tehran, Iran.
• ISPST 1986, Amirkabir University of Technology, Tehran, Iran.

ISPST 2022 will be held in Isfahan University of Technology, on 8-10 November,

2022.
 Aims
- ISPST 2022 aims to provide a platform for knowledge sharing in research and
technology of polymers and polymer science
- To facilitate closer relationships between academic, industrial and research
centers
- To provide a forum for the Iranian and international researchers in all polymer
fields to exchange their ideas of recent advances
- Presenting the latest scientific achievements in various polymer fields

Keynote Lecturer

1. Prof. Mehdi Nekoomanesh

 Managing Director of Iran Polymer and Petrochemical Institute

Email: m.nekoomanesh ippi.ac.ir

subject of speech:
"Ionic Liquid assisted cationic polymerization of olefin monomers"

2. Prof. Ahmad Ramazani

  Full time Prof., Department of Chemical & Petroleum Engineering, Sharif
University of Tech., Tehran, Iran

E-mail: Ramazani sharif.edu

subject of speech:
"Preparation and Characterization of Self-Stimuli Conductive Nerve
Regeneration scafolds"

3. Dr. Ali salimi

 Assistant professor: Iran Polymer and Petrochemical Institute, Tehran,Iran

Email: A.Salimi ippi.ac.ir

subject of speech:
"Facing Challenges in Developing Adhesives and Coatings with High
Refractive Index"
Abstract
After a short introduction about the optoelectronic principles and devices, the
technological requirements in developing optoelectronic devices will be reviewed.
According to literature, the most important requirements are high refractive index
polymers (HRIP) with n values over 1.7, optimum abbe number (20-30), low or zero
birefringence and high optical clarity (transmittance over 90%). The high refractive
index may be achieved either by introducing substituents with high molar
refractions (intrinsic HRIPs) or by combining high-n nanoparticles within polymer
matrix (HRIP nanocomposites). The aromatic rings, halogen atoms except fluorine
and sulfur atoms are effective in increasing the n value of polymers. The
incorporation of TiO2, ZrO2, SiO2, PbS and ZnS nanoparticles resulted in
promising n values in HRIP nanocomposites. However, the well dispersion of
nanoparticles in matrix still remains a main challenge in developing HRIP
nanocomposites with high transparency.

4. Dr. Ali Akbari

 Assistant professor: Urmia University of Medical Sciences (UMSU)

Email: akbari.a umsu.ac.ir

subject of speech:
"Antiviral Polymers as available weapons against novel coronavirus (2019-
nCoV)"

Abstract
Polymers provide enormous opportunity to tailor antiviral activity via specific
interaction with glycoproteins on the viral surface by varying molecular weight, type
 and degree of functionality, sequence distribution, extent of branching, and
molecular architecture. Natural biopolymers with multiple functional groups like
carrageenan, chitosan, and fucoidan are used directly to bind and form irreversible
complexes with envelope glycoproteins on the viral surface to block virus-host cell
interaction, fusion, and entry to the host cell. Natural nucleic acid polymers are used
as antiviral agents after phosphorothioation to render them amphipathic and
stabilization against nuclease degradation. Polymers deactivate the virus before cell
internalization by inhibiting virus-host cell binding or after cell internalization by
blocking virus replication. Brush polymers modified with sialic acid groups bind
with high affinity to viral hemagglutinin to form complexes that block viral
infection. Research results have demonstrated that natural and synthetic polymers
are useful as broad-spectrum antiviral agents to fight against many different types
of viral infections. Further preclinical research in animal models and clinical trials
are needed to validate the antiviral activity of polymers to fight new viral infections
in the absence of vaccines.

5. Dr. Fatemeh Goharpey


 Department of Polymer Engineering, Amirkabir University of Technology,
Tehran, Iran

Email: goharpey aut.ac.ir

subject of speech:
"Different Shape Micro-Particle Manufacturing and Rheology of Dense Non-
Brownian Suspension"
Abstract
In this work, we investigate the effect of polyhedron morphology on shear
thickening, shear jamming and hysteresis characteristics of non-Brownian
suspension of methacrylate particles in Newtonian silicon oil. We have fabricated
the chemically equivalent particles with similar contact friction at three different
shapes via photo-polymerization based methods.
Discontinuous shear thickening behavior are observed in polyhedron particle
suspension which can be attributed to the heightened degree of inter-particle
frictional contacts and subsequently the stronger fictional contact network.
Additionally, it was found that polyhedron morphology enlarges the packing
fraction range for shear jamming. Step up-down measurements also reveal a shear
history hysteresis effect particle contact network configuration. Finally, it was found
that the observed hysteresis loops in flow curves strongly depend on the volume
fraction, which is enhanced with volume fraction and then collapses near the
jamming packing fraction.

6- Dr. Nayere Taebnia

 Karolinska Institutet ( Department of Physiology and Pharmacology),

Stockholm, Sweden

Email:nayere.taebnia ki.se
subject of speech:
"Advanced Biomaterials for Capturing Complex 3D Physiology in Tissue
Models "

Abstract
The field of tissue engineering is shifting towards the creation of complex in vitro
tissue models to explain disease processes (disease modeling) and assess the toxicity
and efficacy of therapies (i.e. drug testing). Tissue models, scalable to industrially
relevant numbers, have been for long restricted to two-dimensional (2D) cell culture
systems, which fail to recapitulate the complex three-dimensional (3D)
microenvironment of the native tissues and consequently limit the predictive value
of cellular response to the introduced stimuli. These limitations call for reliable in
vitro models that capture more of the relevant complexity than traditional 2D
cultures can achieve. Through various examples, this talk illustrates how advances
in biomaterials, 3D(bio)printing, microfluidic devices and quantitative analyses are
converging to allow the creation of more accurate in vitro models that capture some
of the main complex features of the in vivo environment, and enable real-time
monitoring of their function by applying various biopolymer-based sensing
methodologies.

7- Dr. Vajiheh Behranvand

Email: v_behranvand yahoo.com

subject of speech:
"Worldwide fight against COVID-19 using polymer science and
nanotechnology"

Abstract
The role and importance of polymeric materials in human life are not hidden and
these valuable materials are a part of our daily life. One of the lethal illnesses that
humanity has ever seen is COVID-19 irrefutably. During the COVID-19 outbreak,
diverse medical equipment and devices were designed and developed by using
synthetic and natural polymers as infectious personal protective equipment such as
masks, various types of face coverings, respirators, and gloves. On the other hand,
for the enhancement of polymer capability, nanostructures have an efficient role in
virus detection, prevention, protection, mitigation and control measures.

8. Dr. Ali Zarrabi

 Biomedical Engineering Department, Istinye University, Turkey

Email: akbari.a umsu.ac.ir

Subject of speech:
"Nanotheranostic Polymeric Platforms and Personalized Medicine: Recent
Advances and Future Directions"
9. Prof. Clemens Holzer

 Department Kunststofftechnik, Montanuniversität Leoben, Otto Glöckel-

Str., Leoben, Österreich, Austria

Email: Clemens.Holzer unileoben.ac.at

Subject of speech:
"Injection Moulding of flexible devices"
Abstract
The demand for low-cost, randomly shaped and lightweight electronic devices has
increased significantly over the past years. Hereby one path is to employ the
Injection Molded Structural Electronics (IMSE) process where electronic films are
overmolded with a thermoplastic to form the final part. Those films can comprise
surface mounted components, LEDs, capacitive sensors or flexible Printed Circuit
Boards (flexPCBs) which are embedded between plastics sheets via lamination
processes. Hence devices such as personal activity meters or (car) control panels
with smooth surfaces can be produced that bypass the need of additional buttons
and sliders. Elevated temperatures and shear stresses prevail during overmolding
which can result in damaged parts after this final manufacturing step. Hence various
factors such as the individual film(-layer) materials and injection molding
parameters have to be considered carefully to ensure damage free manufacturing.
The aim of this work was to investigate those aspects in principal by overmolding
test film strips and to assess their visual integrity afterwards. These specimens
consisted of a flexPCB encapsulated by two different thermoplastic polyurethanes
(TPUs) as glue middle layer and polycarbonate (PC) or Polyethylene terephthalate
(PET) sheets as outer layers. Injection molding parameter studies were performed
where the films were inserted into a stepped plate mold and overmolded with PC
using different melt temperatures, mold temperatures and injection speeds. The
distortion on the films was found to be reduced with higher melt temperature, lower
mold temperature and faster injection speed. At given molding settings films made
of materials with the higher melting temperature performed better. Additional
geometric conditions such as proximity to the gate and low mold thickness were
found to affect the integrity of the produced films negatively.

10. Dr. Alireza Foroozani Behbahani

 post-doctoral researcher at the Johannes Gutenberg University of Mainz

Email: af.behbahani iacm.forth.gr

Subject of speech:

"Atomistic and Coarse-grained Simulations of Polymer Melts and

Nanocomposites"
Abstract
Molecular simulations are powerful and predictive tools for studying polymers in
bulk and at interfaces. However, simulation of high molecular weight entangled
polymers is not straightforward, because of the broad ranges of time and length
scales involved in their motions. Here we present a hierarchical simulation
methodology for the calculation of the dynamical and linear viscoelastic properties
of polymer melts.
At the finest level, chains are described via an atomistic model. At a moderately
coarse-grained (mCG) level, few atoms (e.g., one monomer) of the chain are lumped
into one CG bead. The mCG potentials are derived based on the finer level atomistic
model. Thorough the mCG model, moderately entangled chains can be simulated.
Also, the results of the mCG model are used to parameterize a highly coarse-grained
slip-spring model in which several monomers of the chain are mapped into one bead.
We also present the results of atomistic simulations for the behavior of polymer
melts in the vicinity of nanoparticles (NPs). Interfacial packing of polymer chains
close tothe NP surface, statistics of the adsorbed chains, and interface induced
dynamicalheterogeneities are discussed.

11. Prof. Naser Mohammadi

 Professor, Amirkabir University of Technology - Tehran Polytechnic,

Iran
Email: mohamadi aut.ac.ir
Subject of speech:
"Effect of water infiltration rate on mechanical properties of heat treated
crumb rubber containing cementitous mortar"
12. Dr. Shervin Ahmadi

 Head of Petrochemical Faculty, Iran Polymer and Petrochemical Institute,

Tehran, Iran

Email: sh.ahmadi ippi.ac.ir

Subject of speech:
"Manipulating the morphology of PA6/POE blends using graphene to achieve
electrical properties"

13. Dr. Azadeh Seifi

 Assistant Professor, Gachsaran Collage of oil, Yasouj University, Iran

Email: azi_spr yahoo.com

Subject of speech:
"Effect of Initial Silica Content on the Phase Composition, Morphology, and
Thermal Oxidation Kinetic of Novolac-based Carbon Aerogel Composites"

Abstract
Polymer-derived carbon aerogels are a unique class of highly porous nanostructure
materials that have excellent properties such as low density, low thermal
conductivity, and high specific surface area. Novolac is widely used in manufacture
of these aerogels due to economic considerations and the high char yield of this
polymer. The main route for synthesizing these materials is the initial sol-gel
polymerization followed by a drying step to form the polymeric aerogel and a final
carbonization process to derive the carbon aerogel. These materials have application
potential in many scientific areas, especially in thermal management systems such
as thermal insulators and thermal shields. However, the main drawback of the low
thermal oxidation temperature (upper than 450 ºC) of these materials limits their
widespread application. So, there is a need to modify these aerogels by preparing a
composite aerogel with higher thermal stability. One of the most efficient ways to
improve thermal stability is incorporating a more refractory phase component (Si-
containing phase such as silica and silicon carbide) into the colloidal structure of the
aerogel via the in-situ sol-gel polymerization. The synthesis route of these aerogel
composites as well as their characterization and thermal performance were
presented in this speech. Also, the Non-Parametric Kinetic analysis was introduced
as the more reliable method than the other kinetic methods for evaluating the
thermal oxidation kinetics of these nanostructure materials with highly porous
character.
14. Prof. Hamid Yeganeh

 Prof. Iran Polymer & Petrochemical Institute, Tehran, Iran

Email: h.yeganeh ippi.ac.ir

Subject of speech:
"Vegetable oil-based polymers for controlled drug delivery systems"

15. Prof. Mohammad Atai

 Prof. Iran Polymer & Petrochemical Institute, Tehran, Iran

Email: M.Atai ippi.ac.ir

Subject of speech:
"Adhesion in dentistry"
 ======================================================

News & Events

Special topics:
• Polymer in Biomedical and tissue Engineering
• Polymeric Materials for Medical Care in the COVID-19 Pandemic
 Important Dates

 Abstract Submission Deadline: August 1, 2022

 Abstract Acceptance Notification: September 16, 2022
 Early Registration Deadline: October 8, 2022
 Late Registration Deadline: October 24, 2022
 Conference Dates: 8-10 November 2022

.
======================================================
Welcome Message

Welcome Note of IPS President

Dear All,

Iranian Polymer Society invites all the participants from all over the world to attend "15 th
International Seminar on Polymer Science and Technology" during 8-10 November 2022 in
Esfahan, at Isfahan University of Technology. This international gathering is primarily devoted
to Application of Polymers in Management of Natural Disasters and includes Keynote
presentations, Orals and interactive discussions, Poster presentations and Exhibitions on both
scientific and social aspects of vast polymeric research activities. This long standing and biggest
event on polymer science and technology in Iran seeks to achieve the best collection of expertise
from academia and industry throughout Iran and other countries.
My colleagues and I would like to acknowledge and extend our gratitude to the hard working staff
and students at Faculty of Polymer Engineering at Isfahan University of Technology to provide
all the facilities to organize this event and share their experiences with all the participants to assure
the best scientific gathering.
As the president of IPS, I have the honor to make sure that such scientifically versatile seminar
fulfills its immediate and future objective goals.

Prof. M. Nekoomanesh,
IPS President
Welcome Note of ISPST 2022 Chair of Scientific Committee

Dear Participants,
It is my great pleasure and honor to invite all polymer scientists and specialists to the 15th
international seminar on polymer science and technology, ISPST2022, which is to be held on
November 8 -10, 2022 in Esfahan, Iran. Department of Chemical Engineering, Faculty of
Polymer Engineering at Isfahan University of Technology in conjunction with the Iran Polymer
Society (IPS) has the great privilege to host this important event. Previous series of ISPST have
successfully provided a room for the exchange of knowledge among the academics working on
polymer science and technology all over the world. With the continuation of previous objectives
and goals, the upcoming gathering hopes to undertake a special task on establishing a closer link
between the knowledge-oriented and technology-oriented researches, thereby promoting the
transfer of knowledge between the academic area and industry. Members of industries are
warmly welcome to discuss possibilities of cooperation in technology development and
education in polymers alongside the seminar in special panels. The selected papers will be
published in the “Iranian Polymer Journal” by the Springer International Publishing AG. The
conference will be accompanied by an exhibition of products and activities of the most notable
companies working in the Iran polymer industries.

Dr. Tayebeh Behzad

ISPST 2022 Chair of Scientific Committee
 ‫======================================================‬
‫‪Report Of ISPST 2022‬‬

‫بسمه تعالی‬
‫پانزدهمین دوره از همایش های بینالمللی علوم و فناوری پلیمر )‪ (ISPST 2022‬در روزهای ‪ 71‬لغایت‬
‫‪ 71‬آبان ماه ‪ 7047‬به میزبانی دانشگاه صنعتی اصفهان با حضور بالغ بر ششصد نفر برگزار شد‪ .‬در راس‬
‫کادر برگزارکننده این همایش‪ ،‬اساتید دانشکده مهندسی شیمی‪-‬گروه مهندسی پلیمر این دانشگاه‪ ،‬آقای دکتر‬
‫روح هللا باقری (رئیس همایش)‪ ،‬آقای دکتر محمود معصومی (دبیر اجرایی همایش) و خانم دکتر طیبه بهزاد‬
‫(دبیر علمی همایش) حضور داشتند و همکاری انجمن پلیمر ایران به ریاست آقای دکتر مهدی نکومنش به‬
‫بهتر برگزار شدن هرچه بیشتر این همایش کمک شایانی بخشید‪.‬‬
‫این همایش در ادامه مجموعه همایش های موفق بین المللی علوم و فناوری پلیمر قبلی که با هدف ارائه‬
‫آخرین روند پیشرفت مواد پلیمری و تسهیل ارتباط و تبادل اطالعات میان پژوهشگران و متخصصان در‬
‫زمینه های مختلف علوم و مهندسی پلیمر میباشد‪ ،‬برگزار گردید‪ .‬الزم به ذکر است که پس از حدود ‪82‬‬
‫سال برگزاری این سری همایش ها از دانشگاه های پایتخت خارج و میزبانی پانزدهمین دوره برای اولین‬
‫بار به دانشگاه صنعتی اصفهان سپرده شد‪ .‬در زیر به معرفی میزبانهای ‪ 70‬سری گذشته این سری همایش‬
‫ها پرداخته شده است‪:‬‬

‫‪ ، ISPST 2020‬دانشگاه تربیت مدرس‪ ،‬تهران‪.‬‬ ‫‪‬‬

‫‪ ، ISPST 2018‬دانشگاه صنعتی امیرکبیر‪ ،‬تهران‪.‬‬ ‫‪‬‬
‫‪ ، ISPST2016‬دانشگاه آزاد اسالمی‪ ،‬تهران‪.‬‬ ‫‪‬‬
‫‪ ،ISPST2014‬پژوهشگاه پلیمر و پتروشیمی ایران‪ ،‬تهران‪.‬‬ ‫‪‬‬
‫‪ ، ISPST2012‬دانشگاه صنعتی امیرکبیر‪ ،‬تهران‪.‬‬ ‫‪‬‬
‫‪ ، ISPST 2009‬پژوهشگاه پلیمر و پتروشیمی ایران‪ ،‬تهران‪.‬‬ ‫‪‬‬
‫‪ ،ISPST 2007‬دانشگاه صنعتی شریف‪ ،‬تهران‪.‬‬ ‫‪‬‬
‫‪ ، ISPST 2005‬دانشگاه صنعتی امیرکبیر‪ ،‬تهران‪،‬‬ ‫‪‬‬
‫‪ ، ISPST 2003‬پژوهشگاه پلیمر و پتروشیمی ایران‪ ،‬تهران‪.‬‬ ‫‪‬‬
‫‪ ، ISPST 2000‬دانشگاه صنعتی امیرکبیر‪ ،‬تهران‪.‬‬ ‫‪‬‬
‫‪ ، ISPST 1997‬پژوهشگاه پلیمر و پتروشیمی ایران‪ ،‬تهران‪.‬‬ ‫‪‬‬
‫‪ ، ISPST 1994‬دانشگاه شیراز‪ ،‬شیراز‪.‬‬ ‫‪‬‬
‫‪ ، ISPST 1990‬دانشگاه صنعتی امیرکبیر‪ ،‬تهران‪.‬‬ ‫‪‬‬
‫‪ ، ISPST 1986‬دانشگاه صنعتی امیرکبیر‪ ،‬تهران‪.‬‬ ‫‪‬‬
‫پس از سپرده شدن میزبانی پانزدهمین دوره همایش به دانشگاه صنعتی اصفهان‪ ،‬به دستور مدیریت وقت‬
‫دانشکده مهندسی شیمی‪ ،‬آقای دکتر محسن نصر اصفهانی‪ ،‬فضایی جهت برپایی دبیرخانه همایش در دانشکده‬
‫اختصاص یافت و خانم مهندس مهشید حافظی به عنوان مسئول دبیرخانه همایش انتخاب شدند‪ .‬همچنین‪،‬‬
‫جمعی از دانشجویان در قالب گروه اجرایی همایش تحت نظر آقای دکتر محمود معصومی‪ ،‬دبیر اجرایی‬
‫همایش‪ ،‬گرد هم آمدند‪.‬‬
‫در ‪ ISPST 2022‬به طور کلی تعداد ‪ 726‬مقاله توسط دبیرخانه این همایش دریافت گردید‬
‫که پس از بررسی اولیه توسط دبیر علمی همایش و تایید و یا تغییر سرفصلهای دریافتی‬
‫مقاالت‪ ،‬به سرگروه های داوری مربوط به هر سرفصل ارسال شد و سرگروه ها نیز مقاالت‬
‫دریافتی را به داوران دارای تخصص و تجربه در آن سرفصل ارسال کردند‪ .‬از این تعداد‬
‫مقاله حدود ‪ 854‬مقاله حدنصاب نمره برای ارائه به صورت حضوری‪/‬شفاهی را دریافت‬
‫نمودند‪ ،‬اما برای برگزاری همایش با نظم هر چه بیشتر با هر یک از این افراد ارتباط برقرار‬
‫شد تا پس از تایید توانایی ارائه حضوری از جانب ایشان‪ ،‬ارائه های آن ها در جدول زمانبندی‬
‫همایش قرار گیرد‪ .‬در نهایت از تعداد ‪ 726‬مقاله دریافتی‪ ،‬تعداد ‪ 921‬مقاله به صورت ارائه‬
‫حضوری‪ ،‬تعداد ‪ 064‬مقاله به صورت ارائه پوستر و تعداد ‪ 22‬مقاله مردود اعالم شدند‪ .‬الزم‬
‫به ذکر است از حیث تعداد دریافت مقاله‪ ،‬این همایش از رکوردداران این مجموعه همایش ها‬
‫بوده است‪ .‬این مقاالت از دانشگاه های سرتاسر ایران دریافت شدند‪ ،‬که در این بین همانطور‬
‫که در جدول زیر به ‪ 5‬دانشگاهی که بیشترین مقاالت ارسالی را داشتهاند اشاره شده است‬
‫بیشترین تعداد مقاالت از دانشگاه صنعتی امیرکبیر دریافت گردید‪.‬‬
 ‫تعداد مقاله دریافتی‬ ‫نام دانشگاه‬
‫‪10‬‬ ‫دانشگاه صنعتی امیرکبیر‬
‫‪40‬‬ ‫دانشگاه صنعتی سهند‬
‫‪46‬‬ ‫پژوهشگاه پلیمر و پتروشیمی ایران‬
‫‪52‬‬ ‫دانشگاه صنعتی اصفهان‬
‫‪05‬‬ ‫دانشگاه تربیت مدرس‬

‫سرفصل های این همایش و تعداد مقاالت پذیرفته شده هر سرفصل نیز در جدول زیر جمع آوری شده است‪:‬‬
‫تعداد مقاالت دریافتی در هر سرفصل‬ ‫سرفصل های همایش‬
‫کاربرد پلیمرها در مهندسی بافت و زیست پزشکی‬
‫‪22‬‬ ‫مواد پلیمری در زمینه مراقبت های پزشکی در همه‬
‫گیری کووید‪71-‬‬
‫‪701‬‬ ‫سنتز پلیمرها و پلیمریزاسیون‬
‫‪01‬‬ ‫زیست پلیمرهای سبز و سازگار با محیط زیست‬
‫‪11‬‬ ‫آلیاژهای پلیمری‪ ،‬کامپوزیتها و نانوکامپوزیتها‬
‫‪00‬‬ ‫چسبها‪ ،‬رنگها و پوششها‬
‫‪67‬‬ ‫االستومرها و فناوریهای آمیزه سازی‬
‫‪50‬‬ ‫پلیمرهای نانوساختار و سامانه های هوشمند‬
‫‪54‬‬ ‫الیاف‪ ،‬فیلمها و غشاهای پلیمری‬
‫‪64‬‬ ‫رئولوژی و فرآیند پلیمرها‬
‫‪86‬‬ ‫شبیه سازی و مدلسازی سامانه های پلیمری‬
‫این همایش به صورت مدون و برنامه ریزی شده در تاالر شیخ بهایی و مجموعه تاالرهای مفاخر دانشگاه‬
‫صنعتی اصفهان در سه روز برگزار شد‪ .‬برنامه های این تاالرها به صورت مختصر در زیر بیان گردیده‬
‫است‪:‬‬

‫تاالر شیخ بهایی‪:‬‬

‫برگزاری مراسم های افتتاحیه و اختتامیه‬ ‫‪‬‬

‫پذیرش شرکت کنندگان در همایش‬ ‫‪‬‬
‫ارائه سخنرانان ویژه برای تمامی حضار )‪(Plenary Lectures‬‬ ‫‪‬‬
‫ارائه مقاالت پذیرفته شده به صورت پوستر‬ ‫‪‬‬
‫برقراری فضای نمایشگاهی برای ارتباط هرچه بیشتر صنعتگران و دانشگاهیان‬ ‫‪‬‬
‫پذیرایی های زمانهای استراحت‬ ‫‪‬‬
 ‫مجموعه تاالرهای مفاخر‪:‬‬

‫ارائه سخنرانان کلیدی )‪ (Keynote Speakers‬در تاالر های مجزا متناسب با سرفصل ارائه شده در هر‬ ‫‪‬‬
‫تاالر‬
‫ارائه مقاالت پذیرفته شده به صورت حضوری در ‪ 5‬تاالر مجزا متناسب با سرفصل ارائه شده در هر‬ ‫‪‬‬
‫تاالر‬
‫برگزاری جلسه انجمن پلیمر با رؤسای گروه های پلیمری دانشگاه های ایران در روز دوم در سالن شماره‬ ‫‪‬‬
‫‪ 4‬مجموعه تاالر های مفاخر‬

‫این برنامه ها طبق جدول های زمانبندی زیر انجام گردید‪:‬‬

 ‫روز اول‪ 96 -‬آبان ماه ‪9049‬‬

‫جشن افتتاحیه‪ ،‬سخنرانیهای مهم و پذیرش (تاالر شیخ بهایی) ‪51:80-54:90‬‬

‫ارائه سخنران کلیدی‬

‫)‪( (Prof. C. Holzer‬تاالر شیخ بهایی) ‪54:90-85:80‬‬

‫پذیرایی زمان استراحت‪ ،‬بازدید پوسترها و بازدید فضای نمایشگاهی (تاالر شیخ بهایی) ‪-85:90‬‬
‫‪85:80‬‬

‫ارائه های همزمان در تاالرهای مفاخر ‪85:90-84:90‬‬

‫تاالر ‪0‬‬ ‫تاالر ‪9‬‬ ‫تاالر ‪3‬‬ ‫تاالر ‪4‬‬ ‫تاالر ‪8‬‬

‫(پلیمرهای‬ ‫(کاربرد پلیمرها در‬

‫نانوساختار و‬ ‫مهندسی بافت و زیست‬
‫سامانه های‬ ‫پزشکی) و (مواد‬ ‫آلیاژهای پلیمری‪،‬‬
‫زیست پلیمرهای سبز و‬ ‫سنتز پلیمرها و‬
‫هوشمند) و (شبیه‬ ‫پلیمری در زمینه‬ ‫کامپوزیتها و‬
‫سازگار با محیط زیست‬ ‫پلیمریزاسیون‬
‫سازی و مدل‬ ‫مراقبت های پزشکی‬ ‫نانوکامپوزیتها‬
‫سازی سامانه های‬ ‫در همه گیری کووید‪-‬‬
‫پلیمری)‬ ‫‪)91‬‬

‫سخنران کلیدی‬
‫سخنران کلیدی‬ ‫سخنران کلیدی‬
‫(‪)9454:-9959:‬‬
‫ارائه مقاالت‬ ‫(‪)9454:-9959:‬‬ ‫(‪)9454:-9959:‬‬ ‫ارائه مقاالت‬
‫‪Prof. H.‬‬
‫حضوری‬ ‫‪Prof. M. Atai‬‬ ‫‪Dr. Sh. Ahmadi‬‬ ‫حضوری‬
‫‪Yeganeh‬‬
‫‪9454:-9154:‬‬ ‫‪9454:-9154:‬‬
‫ارائه مقاالت حضوری‬ ‫ارائه مقاالت حضوری‬ ‫ارائه مقاالت حضوری‬
‫‪9959:-9152:‬‬ ‫‪9959:-9152:‬‬ ‫‪9959:-9152:‬‬
 ‫پذیرایی نهار (تاالر پذیرایی هشت بهشت)‪،‬‬

‫بازدید پوسترها و بازدید فضای نمایشگاهی (تاالر شیخ بهایی) (‪)84:35-89:55‬‬

‫ارائه سخنرانان کلیدی‬

‫)‪ (Dr. N. Taebnia‬و )‪( (Dr. A. Fooroozani Behbahani‬تاالر شیخ بهایی)‬

‫‪89:55-80:55‬‬

‫ارائه های همزمان در تاالرهای مفاخر ‪80:55-84:95‬‬

‫تاالر ‪0‬‬ ‫تاالر ‪9‬‬ ‫تاالر ‪3‬‬ ‫تاالر ‪4‬‬ ‫تاالر ‪8‬‬

‫(پلیمرهای‬ ‫(کاربرد پلیمرها در‬

‫نانوساختار و‬ ‫مهندسی بافت و زیست‬
‫سامانه های‬ ‫پزشکی) و (مواد‬ ‫آلیاژهای پلیمری‪،‬‬
‫زیست پلیمرهای سبز و‬ ‫سنتز پلیمرها و‬
‫هوشمند) و (شبیه‬ ‫پلیمری در زمینه‬ ‫کامپوزیتها و‬
‫سازگار با محیط زیست‬ ‫پلیمریزاسیون‬
‫سازی و مدل‬ ‫مراقبت های پزشکی‬ ‫نانوکامپوزیتها‬
‫سازی سامانه های‬ ‫در همه گیری کووید‪-‬‬
‫پلیمری)‬ ‫‪)91‬‬

‫ارائه مقاالت‬ ‫ارائه مقاالت‬

‫ارائه مقاالت حضوری‬ ‫ارائه مقاالت حضوری‬ ‫ارائه مقاالت حضوری‬
‫حضوری‬ ‫حضوری‬
‫‪9:544-94544‬‬ ‫‪9:544-94544‬‬ ‫‪9:544-94544‬‬
‫‪9:544-94544‬‬ ‫‪9:544-94544‬‬

‫پذیرایی زمان استراحت‪ ،‬بازدید پوسترها و بازدید فضای نمایشگاهی (تاالر شیخ بهایی) ‪-81:80‬‬
‫‪84:95‬‬
 ‫روز دوم‪ 92 -‬آبان ماه ‪9049‬‬

‫ارائه سخنرانان کلیدی‬

‫)‪( (Dr. A. Zarrabi) (Dr. A. Akbari) (Prof. N. Mohammadi‬تاالر شیخ بهایی) ‪-85:55‬‬
‫‪51:35‬‬

‫پذیرایی زمان استراحت‪ ،‬بازدید پوسترها و بازدید فضای نمایشگاهی (تاالر شیخ بهایی) ‪-85:35‬‬
‫‪85:55‬‬

‫ارائه های همزمان در تاالرهای مفاخر ‪85:35-84:35‬‬

‫تاالر ‪0‬‬ ‫تاالر ‪9‬‬ ‫تاالر ‪3‬‬ ‫تاالر ‪4‬‬ ‫تاالر ‪8‬‬

‫(االستومرها و‬
‫فناوریهای آمیزه ‪-‬‬ ‫(کاربرد پلیمرها در‬
‫سازی) ‪( ،‬شبیه‬ ‫مهندسی بافت و زیست‬
‫زیست پلیمرهای‬ ‫آلیاژهای پلیمری‪،‬‬
‫سازی و مدلسازی‬ ‫پزشکی) و (مواد پلیمری‬ ‫سنتز پلیمرها و‬
‫سبز و سازگار با‬ ‫کامپوزیتها و‬
‫سامانه های پلیمری)‬ ‫در زمینه مراقبت های‬ ‫پلیمریزاسیون‬
‫محیط زیست‬ ‫نانوکامپوزیتها‬
‫و (پلیمرهای‬ ‫پزشکی در همه گیری‬
‫نانوساختار و سامانه‬ ‫کووید‪)91-‬‬
‫های هوشمند)‬

‫سخنران کلیدی‬ ‫سخنران کلیدی‬

‫ارائه مقاالت‬ ‫ارائه مقاالت‬ ‫ارائه مقاالت‬
‫(‪)94524-99544‬‬ ‫(‪)94524-99544‬‬
‫حضوری‬ ‫حضوری‬ ‫حضوری‬
‫‪Prof. A. Ramazani‬‬ ‫‪Dr. A. Seifi‬‬
‫‪94524-91524‬‬ ‫‪94524-91524‬‬ ‫‪94524-91524‬‬
‫ارائه مقاالت حضوری‬ ‫ارائه مقاالت حضوری‬
 ‫‪99544-91514‬‬ ‫‪99544-91514‬‬

‫پذیرایی نهار (تاالر پذیرایی هشت بهشت)‪،‬‬

‫بازدید پوسترها و بازدید فضای نمایشگاهی (‪)84:45-89:55‬‬

‫ارائه سخنرانان کلیدی‬

‫)‪ (Prof. H. Yeganeh‬و )‪( (Dr. V. Baharvand‬تاالر شیخ بهایی) ‪89:55-80:55‬‬

‫ارائه های همزمان در تاالرهای مفاخر ‪80:55-84:95‬‬

‫تاالر ‪0‬‬ ‫تاالر ‪9‬‬ ‫تاالر ‪3‬‬ ‫تاالر ‪4‬‬ ‫تاالر ‪8‬‬

‫(کاربرد پلیمرها در‬

‫(االستومرها و‬
‫مهندسی بافت و زیست‬
‫فناوریهای آمیزه ‪-‬‬ ‫آلیاژهای پلیمری‪،‬‬
‫الیاف‪ ،‬فیلم ها و‬ ‫پزشکی) و (مواد پلیمری‬ ‫سنتز پلیمرها و‬
‫سازی) و (چسب‬ ‫کامپوزیتها و‬
‫غشاهای پلیمری‬ ‫در زمینه مراقبت های‬ ‫پلیمریزاسیون‬
‫ها‪ ،‬رنگ ها و‬ ‫نانوکامپوزیتها‬
‫پزشکی در همه گیری‬
‫پوشش ها)‬
‫کووید‪)91-‬‬

‫ارائه مقاالت‬ ‫ارائه مقاالت‬ ‫ارائه مقاالت‬

‫ارائه مقاالت حضوری‬ ‫ارائه مقاالت حضوری‬
‫حضوری‬ ‫حضوری‬ ‫حضوری‬
‫‪9:544-94544‬‬ ‫‪9:544-94544‬‬
‫‪9:544-94544‬‬ ‫‪9:544-94544‬‬ ‫‪9:544-94544‬‬

‫پذیرایی زمان استراحت‪ ،‬بازدید پوسترها و بازدید فضای نمایشگاهی (تاالر شیخ بهایی) ‪-81:80‬‬
‫‪84:95‬‬
 ‫روز سوم‪ 91 -‬آبان ماه ‪9049‬‬

‫ارائه سخنران کلیدی‬

‫)‪( (Prof. M. Nekoomanesh‬تاالر شیخ بهایی) ‪42:84-41:44‬‬
‫پذیرایی زمان استراحت‪ ،‬بازدید پوسترها و بازدید فضای نمایشگاهی (تاالر شیخ بهایی) ‪41:44-94:44‬‬
‫ارائه های همزمان در تاالرهای مفاخر ‪94:44-92:24‬‬

‫تاالر ‪5‬‬ ‫تاالر ‪0‬‬ ‫تاالر ‪8‬‬ ‫تاالر ‪2‬‬ ‫تاالر ‪9‬‬

‫(کاربرد پلیمرها در‬

‫مهندسی بافت و زیست‬
‫پزشکی) و (مواد پلیمری‬
‫زیست پلیمرهای‬
‫رئولوژی و فرآیند‬ ‫چسب ها‪ ،‬رنگ ها و در زمینه مراقبت های‬ ‫سنتز پلیمرها و‬
‫سبز و سازگار‬
‫پلیمرها‬ ‫پزشکی در همه گیری‬ ‫پوشش ها‬ ‫پلیمریزاسیون‬
‫با محیط زیست‬
‫کووید‪ )71-‬و (الیاف‪،‬‬
‫فیلم ها و غشاهای‬
‫پلیمری)‬
‫سخنران کلیدی‬
‫سخنران کلیدی‬
‫(‪)74:44-74:64‬‬
‫(‪)74:44-74:64‬‬
‫‪Dr. F.‬‬ ‫ارائه مقاالت‬
‫ارائه مقاالت حضوری‬ ‫‪Dr. A. Salimi‬‬ ‫ارائه مقاالت‬
‫‪Goharpey‬‬ ‫حضوری‬
‫‪74:44-78:84‬‬ ‫حضوری‬
‫ارائه مقاالت‬ ‫‪74:44-78:44‬‬ ‫ارائه مقاالت‬ ‫‪74:44-78:44‬‬
‫حضوری‬ ‫حضوری‬
‫‪74:64-78:74‬‬ ‫‪74:64-78:74‬‬

‫پذیرایی نهار (تاالر پذیرایی هشت بهشت)‪ ،‬بازدید پوسترها و بازدید فضای نمایشگاهی (‪)92:44-90:44‬‬

‫سخنرانی های مهم و جشن اختتامیه (تاالر شیخ بهایی) ‪90:44-95:44‬‬

‫پذیرایی زمان استراحت‪ ،‬بازدید پوسترها و بازدید فضای نمایشگاهی (تاالر شیخ بهایی) ‪95:44-95:84‬‬
 ‫داوری ارائه ها‬

‫همان طور که ذکر شد مقاالت ارائه شده در این همایش در دو دسته ارائه های حضوری و ارائه های پوستر‬
‫قرار گرفتند‪ .‬برای داوری ارائه های حضوری در سه روز همایش همواره یک تا سه نفر از اساتید برجسته‬
‫و متخصص در حوزه موضوعات مورد ارائه و بحث در هر تاالر به عنوان مدیر جلسات و داور حضور‬
‫داشتند و در پایان هر بخش از ارائه ها نمرات و نظرات خود را در فرم های مربوطه درج نمودند و سپس‬
‫این فرم ها توسط مسئول هر سالن برای بررسیهای بعدی جمعآوری شد‪ .‬در بخش ارائه‬
‫پوسترها‪ 058 ،‬عنوان مقاله در زمینههای مختلف و مباحث روز دنیا در سه روز متوالی در معرض دید‬
‫عموم قرار گرفت و توجه بازدیدکنندگان و عالقهمندان بسیاری را به خود جلب کرد‪ .‬همچنین‪ ،‬داوری علمی‬
‫پوسترهای ارائه شده توسط اساتید برجسته و متخصص در هر سرفصل انجام و نمرات آن جهت انتخاب‬
‫مقاله برتر ثبت گردید‪ .‬پس از جمع بندی و بررسی نتایج داوری با همراهی انجمن پلیمر‪ ،‬ارائه برتر در هر‬
‫سرفصل متعاقبا اعالم خواهد شد‪.‬‬

‫مراسم های افتتاحیه و اختتامیه‬

‫مراسم افتتاحیه در صبح روز ‪ 71‬آبان ماه ‪ 7047‬با حضور آقای دکتر سعید نوری خراسانی به عنوان‬
‫گرداننده مراسم برگزار گردید‪ .‬در زیر به صورت مختصر به بیان لیست برنامه های مراسم افتتاحیه پرداخته‬
‫می شود‪:‬‬

‫تالوت آیاتی از قرآن مجید و پخش سرود ملی جمهوری اسالمی ایران‬ ‫‪‬‬
‫سخنرانی معاونت پژوهشی دانشگاه آقای دکتر صفوی‬ ‫‪‬‬

‫سخنرانی رئیس انجمن پلیمر آقای دکتر مهدی نکومنش‬ ‫‪‬‬

‫سخنرانی رئیس همایش آقای دکتر روح هللا باقری‬ ‫‪‬‬
‫سخنرانی دبیر علمی همایش خانم دکتر طیبه بهزاد‬ ‫‪‬‬
‫سخنرانی دبیر اجرایی همایش آقای دکتر محمود معصومی‬ ‫‪‬‬
‫مراسم اختتامیه نیز در بعداز ظهر روز ‪ 71‬آبان ماه ‪ 7047‬با حضور آقای دکتر عباس محمدی به عنوان‬
‫گرداننده مراسم برگزار گردید‪ .‬در زیر به صورت مختصر به بیان لیست برنامه های مراسم اختتامیه‬
‫پرداخته می شود‪:‬‬

‫تالوت آیاتی از قرآن مجید و پخش سرود ملی جمهوری اسالمی ایران‬ ‫‪‬‬
‫سخنرانی رئیس انجمن پلیمر آقای دکتر مهدی نکومنش‬ ‫‪‬‬
‫سخنرانی دبیر اجرایی همایش آقای دکتر محمود معصومی‬ ‫‪‬‬
‫قدردانی از اساتید پیشکسوت حوزه پلیمر‬ ‫‪‬‬
‫تقدیر از مقاالت برتر توسط شرکت های پارسا پلیمر شریف (یک مقاله) و رازین پلیمر (دو مقاله) و‬ ‫‪‬‬
‫سخنرانی مدیران این دو شرکت‬
‫قدردانی از حامیان مالی همایش‬ ‫‪‬‬
‫قدردانی از اساتید برجسته پلیمر حاضر در همایش‬ ‫‪‬‬
‫معرفی و تقدیر از دانشجویان برتر شرکت کننده (‪ 74‬نفر) در مسابقه پاسخ به سواالت طراحی شده توسط‬ ‫‪‬‬
‫انجمن پلیمر که حین برگزاری همایش انجام و در روز آخر مورد ارزیابی انجمن پلیمر قرار گرفت‬
‫قدردانی از کادر اجرایی همایش‬ ‫‪‬‬
‫عکس یادگاری دسته جمعی‬ ‫‪‬‬

‫ضیافت شام قدردانی‬

‫به منظور قدردانی از حضور اساتید و صنعتگران حامی همایش‪ ،‬در شب دوم همایش (‪72‬ام آبان ماه)‬
‫ضیافت شام قدردانی در مجتمع فرهنگی اردیبهشت دانشگاه صنعتی اصفهان واقع در خیابان آتشگاه اصفهان‬
‫برگزار شد‪ .‬این مراسم برای بیش از ‪ 754‬نفر تدارک دیده شده بود‪ .‬مدعوین در حین پذیرایی ساعات خوشی‬
‫را در کنار هم سپری کردند و در انتها به صرف شام پرداختند‪.‬‬
 ‫تور گردشگری شهر اصفهان‬

‫با توجه به برگزاری پانزدهمین دوره همایش ‪ ISPST‬در شهر تاریخی اصفهان‪ ،‬کادر برگزارکننده همایش‬
‫برای ایجاد خاطره ای به یاد ماندنی برای شرکت کنندگان این همایش‪ ،‬دانشگاه صنعتی اصفهان و شهر‬
‫اصفهان‪ ،‬اقدام به برگزاری تور گردشگری شهر در عصر روزهای ‪ 71‬ام و ‪72‬ام آبان ماه ‪ 7047‬بعد از‬
‫اتمام برنامه های همایش نمودند‪ .‬شرکت کنندگان در روز اول از میدان نقش جهان و در روز دوم از پل‬
‫خواجو بازدید کردند‪.‬‬

‫پوشش خبری همایش‬

‫مراسم افتتاحیه این همایش به صورت زنده در آپارات پخش گردید‪www.aparat.com/iutnews/live .‬‬
‫همچنین خبرگزاری صدا و سیما نیز گزارش تهیه شده در حین برگزاری همایش و برخی مصاحبه های‬
‫انجام شده پیرامون همایش را از شبکه اصفهان خبر پخش نمود‪.‬‬
 ‫حضور صنعتگران و حامیان مالی همایش‬

‫همایش های بین المللی علوم وتکنولوژی پلیمر با بیش از ‪ 65‬سال قدمت برگزاری به عنوان مهمترین‬
‫همایش در زمینه پلیمرها در ایران به شمار میرود‪.‬عالوه بر ابعاد علمی این همایش‪ ،‬یکی دیگر از اهداف‬
‫این همایش ها برقراری ارتباط موثر بین دانشگاه و صنعت می باشد‪ .‬در پانزدهمین همایش بین المللی علوم‬
‫و تکنولوژی پلیمر یک بستر ارتباطی مناسب میان صنعت و دانشگاه برقرار گردید که صنعتگران و محققین‬
‫حوزه ی صنعت با ارائه مقاالت و پوسترهای خود حضوری فعال در این همایش داشته باشند‪ .‬در ادامه به‬
‫معرفی شرکتهای حاضر در همایش و سطح حمایت آن ها پرداخت شده است‪.‬‬

‫سطح حمایت مالی‬ ‫لوگو‬ ‫اسامی شرکت ها‬

‫شرکت ظریف مصور‬

‫حامی سطح پالتین‬

‫صنایع گیتی پسند‬

‫حامی سطح پالتین‬

‫حامی سطح طالیی‬ ‫شرکت رازین پلیمر‬

‫انجمن مستربچ و کامپاند‬

‫حامی سطح طالیی‬
 ‫شرکت آریا پلیمر‬
‫حامی سطح نقره ای‬
‫پیشگام‬

‫شرکت پارسا پلیمر‬

‫حامی سطح نقره ای‬ ‫شریف‬

‫حامی سطح نقره ای‬ ‫پتروشیمی اروند‬

‫شرکت کیمیا پلیمر‬

‫حامی سطح برنز‬
‫آپادانا‬

‫شرکت سینا پلیمر‬

‫حامی سطح برنز‬
‫اسپادانا‬

‫شرکت تجهیزات‬
‫اخذ غرفه نمایشگاهی‬ ‫آزمایشگاهی‬
‫ناژ‬
‫شرکت های مذکور با حضور در نمایشگاه جانبی همایش و دایر نمودن غرفه های خود ارتباطی موثر را‬
‫ما بین خود و محققین ایجاد نمودند و این امر منجر به غنای هر چه بیشتر این همایش گردید‪.‬‬
======================================================
*************************************************
Organization

Prof. R. Bagheri,
IPS2022 President, Isfahan University of Technology
Prof. M. Nekoomanesh,
IPS President, Iran Polymer and Petrochemical Institute
Dr. T. Behzad,
Chair of Scientific Committee, Isfahan University of Technology
Dr. M. Masoomi,
Chair of Executive Committee, Isfahan University of Technology
Eng. M. Hafezi

Scientific Committee

Dr. Tayebeh Behzad Isfahan University of Technology tbehzad iut.ac.ir

Dr. Mahmood Masoomi Isfahan University of Technology m.masoumi iut.ac.ir
Dr. Mehdi Nekoomanesh Iran Polymer and Petrochemical Institute M.Nekoomanesh
ippi.ac.ir
Dr. M. Nasr Esfahani Isfahan University of Technology mnasr iut.ac.ir
Dr. Saied Nouri-Khorasani Isfahan University of Technology saied iut.ac.ir
Dr. A. Fakhar Isfahan University of Technology a.fakhar iut.ac.ir
Dr. M. Sadeghi Isfahan University of Technology m-sadeghi iut.ac.ir
Dr. K. Shams Isfahan University of Technology k_shams iut.ac.ir
Dr. Nasrin Etesami Isfahan University of Technology netesami iut.ac.ir
Dr. Peiman Mosaddegh Isfahan University of Technology mosadegh iut.ac.ir
Dr. Mohammad Dinari Isfahan University of Technology dinari iut.ac.ir
Dr. Hossein Tavanai Isfahan University of Technology tavanai iut.ac.ir
Dr. Sedigheh Borhani Isfahan University of Technology sborhani iut.ac.ir
Dr. Hossein Fashandi Isfahan University of Technology h.fashandi iut.ac.ir
Dr. Mehdi Karevan Isfahan University of Technology mkarevan iut.ac.ir
Dr. Ismaeil Ghasemi Iran Polymer and Petrochemical Institute I.Ghasemi ippi.ac.ir
Dr. Amir masoud Rezadoust Iran Polymer and Petrochemical Institute A.Rezadoust ippi.ac.ir
Dr. Shervin Ahmadi Iran Polymer and Petrochemical Institute Sh.Ahmadi ippi.ac.ir
Dr. Mohammad Karabi Iran Polymer and Petrochemical Institute M.karabi ippi.ac.ir
Dr. Hmid Mirzadeh Amirkabir Unversity of Technology mirzadeh aut.ac.ir
Dr. Fatemeh Goharpay Amirkabir Unversity of Technology goharpey aut.ac.ir
Dr. Hamid Yeganeh Iran Polymer and Petrochemical Institute h.yeganeh ippi.ac.ir
Dr. Mohammad Hossein Iran Polymer and Petrochemical Institute M.Beheshty ippi.ac.ir
Beheshty
Dr. Haniyeh Shaki Golestan university h.shaki gu.ac.ir
Dr. Ahmad Reza Bahramian Tarbiat modares University abahramian
modares.ac.ir
Dr. Mehrdad Kokabi Tarbiat modares University mehrir modares.ac.ir
Dr. Mehdi Abdollahi Tarbiat Modares abdollahim
modares.ac.ir
Dr. Mohamadreza Kalaee Islamic Azad University - Tehran center mohammad.kalaee
branch gmail.com
Dr. Hamid Garmabi Amirkabir University of Technology garmabi aut.ac.ir
Dr. Vahid Haddadi-Asl Amirkabir University of Technology haddadi aut.ac.ir
Dr. Naser Mohammadi Amirkabir University of Technology mohamadi aut.ac.ir
Dr. Reza Bagheri Sharif University of Technology rezabagh sharif.edu
Dr. G (Hamzeh) Hashemi University of Tehran ghmotlagh ut.ac.ir
Motlagh
Dr. Mohammad Najafi University of Tehran najafi.m ut.ac.ir
Dr. Milad Mehranpour Islamic Azad University Science and milad_meh yahoo.com
Research Branch
Dr. Hamed Salimi Kenari University of Mazandaran h.salimi umz.ac.ir
Dr. Ali Zarrabi Eng. & Nat. Sci alizarrabi gmail.com
Dr. Moahammad Reza Science and technology mr_moghbeli iust.ac.ir
Moghbeli
Dr. Omid Moini Jazani University of Isfahan o.moini eng.ui.ac.ir
Dr. Somayeh Taymouri University of Isfahan s_taymouri
pharm.mui.ac.ir
Dr. Fatemeh Rafiemanzelat University of Isfahan frafiemanzelat
sci.ui.ac.ir
Dr. Mohammad Heidari- University of Isfahan m.heidarirarani
Rarani eng.ui.ac.ir
Dr. Amir H. Navarchian University of Isfahan navarchian eng.ui.ac.ir
Dr. Parvin Asadi chaleshtary University of Isfahan asadi pharm.mui.ac.ir
Dr. Abbas Mohammadi University of Isfahan a.mohammadi
sci.ui.ac.ir
Dr. Rasoul Esmaeely-Neisiany Hakim Sabzevari University r.esmaeely hsu.ac.ir
Dr. Fatemeh Arabgol Imam Khomeini International University - arabgol54 yahoo.com
Buin Zahra
Dr. Farhang Abbasi Sahand University of Technology f.abbasi sut.ac.ir
Dr. Hossein Roghani Sahand University of Technology r.mamaghani sut.ac.ir
Mamaghani
Dr. Mehdi Salami Kaljahi Sahand University of Technology m.salami sut.ac.ir
Dr. Javad Foroughi Australia foroughi uow.edu.au
Dr. Alireza Froozani IACM-FORTH, Greece af.behbahani
Behbahani iacm.forth.gr
Dr. Mitra Tavakoli Yazd University mtavakoli yazd.ac.ir
Dr. Mohammad Reza Nabid Shahid Beheshti University m-nabid sbu.ac.ir
Dr. Mahnaz Shahzamani Jihad Training Center Isfahan University m.shahzamani
of Technology acecr.ac.ir
 Dr. Mehran Hayaty Malek Ashtar University mehayaty yahoo.com

======================================================

Executive Committee

1. Dr. Mahmood Masoomi, Chair of Executive Committee, Isfahan University of

Technology, mmasoomi iut.ac.ir
2. Dr. Tayebeh Behzad, Isfahan University of Technology, t.behzad iut.ac.ir
3. Mahshid Hafezi, Isfahan University of Technology, mahshid.hafezi96
pa.iut.ac.ir
4. Arezoo Mirghasemi, Iran Polymer Society, mirghasemi.a gmail.com
5. Hakimeh Mohammadzad, Iran Poymer society, infoipsts gmail.com
6. Tina Rabiee, Isfahan University of Technology, t.rabiee ce.iut.ac.ir
7. MohammadAli Hasannia, Isfahan University of Technology, m.hasannia
ce.iut.ac.ir
8. Dr. Fatemeh Sadegh, Isfahan University of Technology, fatemehsadegh396
gmail.com
9. Dr. Khatereh Akbarnejad, Isfahan University of Technology, kh_akbarnezhad
yahoo.com
10. Hossein Emadi, Isfahan University of Technology, emadi.hossein
hotmail.com
11. Amir Hossein moayyed, Isfahan University of Technology, a.moayed
ce.iut.ac.ir
12. Ali shaker, Isfahan University of Technology, ali.shaker.polymer gmail.com
13. Ali Kakapour, Isfahan University of Technology, alikakapoor1995 gmail.com
14. Reza Behnam, Isfahan University of Technology, r.behnam ce.iut.ac.ir
15. Ali Pirmoradian, Isfahan University of Technology, en.ali.pd gmail.com

The Jury
Name Email Address
Dr. Mehdi Nekoomanesh m.nekoomanesh ippi.ac.ir
Dr. Roohollah Bagheri bagheri iut.ac.ir
Dr. Tayebeh Behzad tbehzad iut.ac.ir
Dr. Mahmood Masoomi mmasoomi iut.ac.ir
Dr. Mohammad Dinari dinari iut.ac.ir
Dr. Saeid Nouri Khorasani saied iut.ac.ir
Dr. Afsaneh Fakhar a.fakhar iut.ac.ir
Dr. Morteza Sadeghi m-sadeghi iut.ac.ir
Dr. Ahmad Asadinezhad asadinezhad iut.ac.ir
Dr. Nasrin Etesami netesami iut.ac.ir
Dr. Mehdi Karevan mkarevan iut.ac.ir
Dr. Hossein Tavanai tavanai iut.ac.ir
Dr. Sedigheh Borhani sborhani iut.ac.ir
Dr. Mohsen Badrossamay mohsen.badrossamay iut.ac.ir
Dr. AmirHossein Navarchian navarchian eng.ui.ac.ir
Dr. Hossein Fashandi h.fashandi iut.ac.ir
Dr. Peiman Mosaddegh mosadegh iut.ac.ir
Dr. Ahmad Moheb ahmad iut.ac.ir
Dr. Omid Moini jazani o.moini eng.ui.ac.ir
Dr. Fatemeh Rafiemanzelat frafiemanzelat chem.ui.ac.ir
Dr. Payam Abassi p.abbasi eng.ui.ac.ir
Dr. Abbas Mohammadi a.mohammadi sci.ui.ac.ir
Dr. Parvin Asadi asadi pharm.mui.ac.ir
Dr. Ahmad Reza Bahramian abahramian modares.ac.ir
Dr. Mehrdad Kokabi mehrir modares.ac.ir
Dr. Nadereh Golshan Ebrahimi ebrahimn modares.ac.ir
Dr. Mahdi Abdollahi abdollahim modares.ac.ir
Dr. Alireza Sharif asharif modares.ac.ir
Dr. Nafiseh Baheiraei n.baheiraei modares.ac.ir
Dr. Ali Salimi a.salimi ippi.ac.ir
Dr. Amir Masoud Rezadoust a.rezadoust ippi.ac.ir
Dr. Mohammad Hossein Beheshty m.beheshty ippi.ac.ir
Dr. Ismail Ghasemi i.ghasemi ippi.ac.ir
Dr. Shahram Mehdipour-Ataei s.mehdipour ippi.ac.ir
Dr. Shervin Ahmadi sh.ahmadi ippi.ac.ir
Dr. Hengameh Honarkar h.honarkar ippi.ac.ir
Dr. Hamid Yeganeh h.yeganeh ippi.ac.ir
Dr. Samal Babanzadeh s.babanzadeh ippi.ac.ir
Dr. Hamid Mobedi H.mobedi ippi.ac.ir
Dr. Mojtaba Mirabedini sm.mirabedini ippi.ac.ir
Dr. Mohammad Zohourian m.zohuriaan ippi.ac.ir
Dr. Kourosh Kabiri k.kabiri ippi.ac.ir
Dr. Sedigheh Soltani s.soltani ippi.ac.ir
Dr. Foroud Abbasi f.abbasi ippi.ac.ir
Dr. Mir Hamid Reza Ghoreishy m.h.r.ghoreishy ippi.ac.ir
Dr. Mohammad Karabi M.karabi ippi.ac.ir
Dr. Shahla Pazokifard s.pazokifard ippi.ac.ir
Dr. Morteza Behzadnasab m.behzadnasab ippi.ac.ir
Dr. Masoud Esfandeh M.Esfandeh ippi.ac.ir
Dr. Yousef Jahani y.jahani ippi.ac.ir
Dr. Hossein Ali Khonakdar h.khonakdar ippi.ac.ir
Dr. Jalil Morshedian j.morshedian ippi.ac.ir
Dr. Ali Akbar Yousefi a.yousefi ippi.ac.ir
Dr. Razi Sahraeian S.Razi ippi.ac.ir
Dr. Hamed Azizi H.Azizi ippi.ac.ir
Dr. Farshid Ziaee f.ziaee ippi.ac.ir
Dr. Azizollah Nodehi a.nodehi ippi.ac.ir
Dr. Majid Ghiass m.ghiass ippi.ac.ir
Dr. Shekoofeh Hakim s.hakim ippi.ac.ir
Dr. Naeemeh Bahri n.bahri ippi.ac.ir
Dr. Mohammad Mehdi Mortazavi m.mortazavi ippi.ac.ir
Dr. Soheil Dariushi s.dariushi ippi.ac.ir
Dr. Mojgan Zandi m.zandi ippi.ac.ir
Dr. Fatemeh Shokrolahi f.shokrolahi ippi.ac.ir
Dr. Jalal Barzin j.barzin ippi.ac.ir
Dr. Mohammad Atai m.atai ippi.ac.ir
Dr. Mohammad Imani m.imani ippi.ac.ir
Dr. Ali Reza Mahdavian a.mahdavian ippi.ac.ir
Dr. Mohammad Barmar m.barmar ippi.ac.ir
Dr. Maryam Oroujzadeh m.oroujzadeh ippi.ac.ir
Dr. Mehdi Barikani m.barikani ippi.ac.ir
Dr. Hajar Jamshidi h.jamshidi ippi.ac.ir
Dr. Mohammad Razavi m.razavi ippi.ac.ir
Dr. G Naderi g.naderi ippi.ac.ir
Dr. Parvin Shokrollahi p.shokrolahi ippi.ac.ir
Dr. Mehrdad Jalilian m.djalilian ippi.ac.ir
Dr. Mohamadreza Kalaee mohammad.kalaee gmail.com
Dr. Mitra Tavakoli Ardakani mtavakoli yazd.ac.ir
Dr. Ghodratollah Hashemi Motlagh ghmotlagh ut.ac.ir
Dr. Hamid Mirzadeh mirzadeh aut.ac.ir
Dr. Fatemeh Goharpey goharpey aut.ac.ir
Dr. Naser Mohammadi mohamadi aut.ac.ir
Dr. Ali Asghar Katbab katbab aut.ac.ir
Dr. Vahid Haddadi Asl haddadi aut.ac.ir
Dr. Hamid Garmabi garmabi aut.ac.ir
Dr. Shadab Bagheri s.bagheri aut.ac.ir
Dr. Hossein Nazokdast nazdast aut.ac.ir
Dr. Mostafa Ahmadi mo.ahmadi aut.ac.ir
Dr. Alireza Mahjub mahjub aut.ac.ir
Dr. Azam Jalali Arani ajalali aut.ac.ir
Dr. Mehdi Rafizadeh mehdi aut.ac.ir
Dr. Gity Mir Mohammad Sadeghi gsadeghi aut.ac.ir
Dr. Manouchehr Khorasani khorasani.m aut.ac.ir
Dr. Ali Asghar Sarabi Daryani sarabi aut.ac.ir
Dr. S.REZA Ghaffarian Anbaran sr_ghaffarian aut.ac.ir
Dr. Saeideh Gorji Kandi s.gorji aut.ac.ir
Dr. Hesam Makki hmakki aut.ac.ir
Dr. Hossein Yahyaei yahyaei aut.ac.ir
Dr. Morteza Ebrahimi ebrahimi aut.ac.ir
Dr. Azizeh Javadi ajavadi aut.ac.ir
Dr. Farhad Sharif sharif aut.ac.ir
Dr. Ali Kargari kargari aut.ac.ir
Dr. Ahmadreza Raisi raisia aut.ac.ir
Dr. Mansooreh Soleimani soleimanim aut.ac.ir
Dr. Hajir Bahrami hajirb aut.ac.ir
Dr. Mohammadali Tavanei tavanaie aut.ac.ir
Dr. Mohammad Karimi mkarimi aut.ac.ir
Dr. Akbar Karkhaneh a.karkhaneh aut.ac.ir
Dr. Atefeh Solouk Mofrad atefeh.solouk aut.ac.ir
Dr. Reza Mohammad Ali Malek rmamalek aut.ac.ir
Dr. Reza Bagheri rezabagh sharif.edu
Dr. Akbar Shojaei akbar.shojaei sharif.edu
Dr. GholamReza Pircheraghi pircheraghi sharif.ir
Dr. Abbas Mousavi musavi sharif.edu
Dr. Mohammad Reza Nabid m-nabid sbu.ac.ir
Dr. GholamAli Koohmareh g.a.koohmareh sci.ui.ac.ir
Dr. Mohammad Rafienia m_rafienia med.mui.ac.ir
Dr. Rasoul Esmaeely Neisiany r.esmaeely hsu.ac.ir
Dr. Mahnaz Shahzamani m.shahzamani acecr.ac.ir
Dr. Mohammad Ali Aroon maaroon ut.ac.ir
Dr. Hossein Mahdavi hosinmahdavi ut.ac.ir
Dr. Mohammad Najafi najafi.m ut.ac.ir
Dr. Siyamak Motahari smotahari ut.ac.ir
Dr. Saeed Bazgir bazgir srbiau.ac.ir
Dr. Farhang Abbasi f.abbasi sut.ac.ir
Dr. Hossein Roghani-Mamaqani r.mamaghani sut.ac.ir
Dr. Hanieh Shaki h.shaki gu.ac.ir
Dr. Milad Mehranpour milad_meh yahoo.com
Dr. Alireza Foroozani Behbahani af.behbahani iacm.forth.gr
Dr. Hamed Salimi Kenari h.salimi umz.ac.ir
Dr. Ali Zarrabi alizarrabi gmail.com
Dr. Javad Foroughi foroughi uow.edu.au
Dr. Ali Akbari akbari.a umsu.ac.ir
Dr. Mir Karim Razavi Aghjeh karimrazavi sut.ac.ir
Dr. Mehdi Salami salami sut.ac.ir
Dr. Hasan Farrokhzad hasanfarrokhzad iust.ac.ir
Dr. Mohammad Fasihi mfasihi iust.ac.ir
Dr. Masoud Jamshidi mjamshidi iust.ac.ir
Dr. Omid Vahidi ovahidi iust.ac.ir
Dr. Maryam Ahmadzadeh Tofighy ahmadzadehtofighi iust.ac.ir
Dr. Mohammad Reza Moghbeli mr_moghbeli iust.ac.ir
Dr. Mahmoud Mousavi mmousavi um.ac.ir
Dr. Mahdi Pourafshari Chenar pourafshari um.ac.ir
Dr. Zahra Maghsoud maghsoud ferdowsi.um.ac.ir
Dr. Reza Darvishi r.darvishi yu.ac.ir
Dr. Zahra Rafiee z.rafiee mail.yu.ac.ir
Dr. Mehdi Abolhasani abolhasani kashanu.ac.ir
Dr. Mehran Rostami rostami-m icrc.ac.ir
Dr. Mehdi Darvish mehdi.darvish polymtl.ca
Dr. Reza Garibi r.gharibi khu.ac.ir
Dr. Mohammad Saeed Enayati m.s.enayati gmail.com
Dr. Elnaz Esmizade St87ee gmail.com
Dr. Ali Vahidifar ali.vahidifar airboss.com
Dr. Milad Mehranpour m.mehranpour danapolygroup.com
Dr. Yeganeh KhademZadeh jkh.yeganeh yahoo.com
Dr. MM Salehi salehimm ripi.ir
Dr. Vahid Vatanpour vahidvatanpour khu.ac.ir
Dr. Yaghoub Mansourpanah mansourpanah.y lu.ac.ir
Dr. Sirous Zeinaddini sirus.zeinaddini gmail.com
Dr. Ali Akbar Zinatizadeh zinatizadeh razi.ac.ir
Dr. Seyed Mohsen Hosseini seyedmohsen_hosseini yahoo.com
Dr. Maryam Homayoonfal m.homayoonfal eng.ui.ac.ir
Dr. Hamed Karkhanechi karkhanechi um.ac.ir
Dr. Ali Abbasian abbasian.a srbiau.ac.ir
Dr. Masoud Mozafari mozafari.masoud gmail.com
Dr. Zohreh Bagher baharebagher gmail.com
Dr. Mohamad Pezeshki-Modaress pezeshkimodaress.m iums.ac.ir
Dr. Shahin Bonakdar shahinbonakdar yahoo.com
Dr. Mohammad Ali Shokrgozar mashokrgozar pasteur.ac.ir

==================================================
====

*************************************************
Organizers & Sponsors

1. Organizers

Isfahan university of
Technology

Iran Polymer Science and Technology Society

2. Sponsors

Academic Sponsor


 Isfahan University of Technology
 Iran Polymer Science and Technology

Society
  Iranian Society of Rheology
 Iran Polymer and Petrochemical

Institute
 Amirkabir University of

Technology

 Tarbiat Modares

University

 University of Borås
 UNSW (University of New South Wales)
 FORTH Research

Center
 Koya University

 ISU (University of Istanbul)

Industrial Sponsor

 Zarif Mosavar Co. , the Industrial Sponsorship in Platinium

Level

 Giti pasand Industrial Group, the Industrial Sponsorship in

Platinium Level


 Razin Polymer Co. , the Industrial Sponsorship in Gold Level

 Master Batch & compound Producers Association of Iran, the

Industrial Sponsorship in Gold Level


 Arvand petrochemical Company, the Industrial Sponsorship in
Silver Level


 Aria Polymer Pishgam, the Industrial Sponsorship in Bronze
Level
 
 Parsa Polymer Sharif, the Industrial Sponsorship in Silver Level


 Kimia Polymer Apadana company, the Industrial Sponsorship in
Bronze Level


 Sina Ploymer Spadana, the Industrial Sponsorship in Bronze
Level


==================================================
====
Sponsorship Levels
...
Sponsorship Levels

Four levels of sponsorship are offered:

Level Cost (Rls)

Platinum 700/000/000
Gold 400/000/000
Silver 300/000/000
Bronze 200/000/000

Credits to sponsorship members of ISPST 2022 (pdf)

==================================================
====
Registration Fees
National

Registration
Participants
(Before October 8, 2022)
Regular 4,500,000 Rls
Student (IPS member) 3,500,000 Rls ( 2,500,000 Rls)
IPS member 4,000,000 Rls
Delegates from Industry 15,000,000 Rls
Faculty member (with two orals) 15,000,000 Rls

International
Registration
Participants
(Before October 8, 2022)
Regular 300 €
Student 150 €
  Please make payments by clicking on "Regisration
form" section through an online gateway.
 Or you can pay through the following account details and send
your deposit receipt to the following email.
 Account name: Central Melli Bank
 Shaba number: IR860100004001071803022757
( chemical engineering
ID:306071861115400000000000000713)
 E-mail: info ipsts.ir

Paper Submission
Abstract Submission & Topics
Abstract Submission

Authors are requested to submit their Extended Abstract through the

seminar website (http://www.ispst.ir/) in the up to date following
areas:

Special topics:

 Polymer in Biomedical and tissue Engineering

 Polymeric Materials for Medical Care in the COVID-19
Pandemic
General topics:
  Polymer Synthesis and Polymerization
 Green and Environmentally Sustainable Biopolymers
 Polymer Blends, Composites and Nano-composites
 Adhesives, Paints and Coatings
 Elastomers and Compounding Technologies
 Nano-structured Polymers and Smart Systems
 Fibers, Films and Polymeric Membranes
 Rheology and Polymer Processing
 Simulation and Modeling of Polymeric System

The extended abstracts are published as conference proceedings,

which are distributed to the participants in the form of a CD. The
extended abstracts must be submitted via the conference website and
should be written in English.The abstract should include a Title, the
information of Authors and Affiliations/Home page link, the E-mail
address of corresponding author and keywords. It must be prepared in
accordance with the ISPST 2022 Abstract Template.

Template:
./files/site1/files/template_2022.doc

NEWS

 Oral presentation and posters should be presented in English.

  Authors must complete the registration application form
online before abstract submitting.

==================================================
===

Seminar Program

The time program of the seminar

Tuesday, 8 November 2022

Opening Ceremony, Important Speeches

08:15-09:45
Plenary lecture
09:45--10:15 (Dr. C. Holzer)
Break 10:15-10:45
Room 1 Room 2 Room 3 Room 4 Room 5
Polymer Polymer Polymers in Green and Nano-
Synthesis Blends, Covid 19, Environmen structured
and Composites, Biomedical tally and Smart
Polymerizatio and Nano- and Tissue Biopolymers systems
n composites Engineering Simulation
and
Modeling
of
Polymeric
Systems
1 10:45- 74:05-
11:05 Keynote Keynote 11:05
Keynote
A-10- speaker speaker A-10-
Speaker
2220-1 (Dr. Sh. (Dr. 2138-1
(Dr. Atai)
11:05- Ahmadi) Yeganeh) 11:05-
10:45-
11:25 10:45- 10:45- 11:25
11:15
A-10- 11:15 11:15 A-10-
2403-2 2219-1
2 11:25- 11:15- 11:15- 11:15- 11:25-
11:45 11:35 11:35 11:35 11:45
A-10- A-10- A-10- A-10- A-10-
2318-1 2399-1 2047-2 2209-1 2525-1

3 11:45- 11:35- 11:35- 11:35- 11:45-

12:05 11:55 11:55 11:55 12:05
A-10- A-10- A-10- A-10- A-10-
2508-3 2299-1 2464-2 2107-2 2335-2

4 12:05- 11:55- 11:55- 11:55- 12:05-

12:25 12:15 12:15 12:15 12:25
A-10- A-10- A-10- A-10- A-10-
2206-1 2565-1 2071-1 2346-1 2335-3
5 12:25- 12:15- 12:15- 12:15- 12:25-
12:45 12:35 12:35 12:35 12:45
A-10- A-10- A-10- A-10- A-10-
2105-1 2065-1 2309-1 2559-2 2336-1

Exhibition, Lunch (12:30-14:00)

Plenary Lectures
)14:00-14:30 Dr. N. Taebnia(
14:30-15:00 (Dr. A. Fooroozani Behbahani)
Room 1 Room 2 Room 3 Room 4 Room 5
Polymer Polymer Polymers in Green and Nano-
Synthesis Blends, Covid 19, Environmen structured
And Composites, Biomedical tally and Smart
Polymerizatio and and Tissue Biopolymers systems
n Nanocompo Engineering Simulation
sites and
Modeling
of
Polymeric
Systems
1 15:00- 15:00- 15:00- 15:00- 15:00-
15:20 15:20 15:20 15:20 15:20
A-10- A-10- A-10- A-10- A-10-
2039-2 2594-1 2292-1 2277-2 2322-2

2 15:20- 15:20- 15:20- 15:20- 15:20-

15:40 15:40 15:40 15:40 15:40
A-10- A-10- A-10- A-10- A-10-
2398-1 2231-1 2490-2 2559-1 2483-1

3 15:40- 15:40- 15:40- 15:40- 15:40-

16:00 16:00 16:00 16:00 16:00
 A-10- A-10- A-10- A-10- A-10-
2514-1 2730-1 2093-1 2489-1 2510-2

4 16:00- 16:00- 16:00- 16:00- 16:00-

16:20 16:20 16:20 16:20 16:20
A-10- A-10- A-10- A-10- A-10-
2562-1 2159-3 2273-2 2320-1 2662-1

5 16:20- 16:20- 16:20- 16:20- 16:20-

16:40 16:40 16:40 16:40 16:40
A-10- A-10- A-10- A-10- A-10-
2407-1 2024-1 2400-1 2124-1 2058-1

Break, Exhibition
16:40-17:15

Wednesday, 9 November 2022

Plenary Lectures
08:30-09:00 (Dr. N. Mohammadi)
09:00-09:30 (Dr.
A.Akbari)
09:30-10:00 (Dr. A. Zarrabi)
Break 10:00-10:30
Room 1 Room 2 Room 3 Room 4 Room 5
Polymer Polymers in Green and Simulation
Polymer
Blends, Covid19, Environmen and Modeling
Synthesis
Composite Biomedical tally of Polymeric
and
s, and and Tissue Biopolymer Systems
Polymerization
Nanocomp Engineering s Nano-
 osites structured and
Smart systems
Elastomers
and
Compounding
Technologies
1 10:30- 10:30-
10:30-
Keynote 10:50 10:50
10:50 Keynote
speaker A-10- A-10-2394-
A-10- Speaker
(Dr. 2570-1 1
2369-1 (Dr.
Seifi)
Ramazani)
2 10:50- 10:30- 10:50- 10:50-
10:30-
11:10 11:00 11:10 11:10
11:00
A-10- A-10- A-10- A-10-2265-
2258-1 2291-1 2330-3 1

3 11:10- 11:00- 11:00- 11:10- 11:10-

11:30 11:20 11:20 11:30 11:30
A-10- A-10- A-10-2359- A-10- A-10-2379-
2419-1 2232-1 2 2360-2 1

4 11:30- 11:20- 11:20- 11:30- 11:30-

11:50 11:40 11:40 11:50 11:50
A-10- A-10- A-10-2606- A-10- A-10-2659-
2358-1 2293-2 1 2209-2 1

5 11:50- 11:40- 11:40- 11:50- 11:50-

12:10 12:00 12:00 12:10 12:10
A-10- A-10- A-10-2569- A-10- A-10-
2503-2 2125-1 1 2351-2 2453-1

6 12:10- 12:00- 12:00- 12:10- 12:10-

12:30 12:20 12:20 12:30 12:30
 A-10- A-10- A-10-2421- A-10- A-10-2263-
2074-1 2255-2 1 2277-3 1

Exhibition, Lunch
(12:20-14:00)
Plenary Lectures
14:00-14:30 (Dr. J. Foroughi)
14:30-15:00 (Dr. Behranvand)
Room 1 Room 2 Room 3 Room 4 Room 5
Polymer Polymer Polymers in Fibers, Elastomers
Synthesis blends, Covid19, Films, and and
and composites, Biomedical Polymeric Compoundin
Polymerization and and Tissue Membranes g
nanocompo Engineering Technologies
sites ,
Rheology Adhesives,
and Paints and
Polymer Coatings
Processing

1 15:00- 15:00- 15:00- 15:00- 15:00-

15:20 15:20 15:20 15:20 15:20
A-10- A-10- A-10- A-10- A-10-2257-
2286-2 2501-1 2128-1 2509-1 1

2 15:20- 15:20- 15:20- 15:20- 15:20-

15:40 15:40 15:40 15:40 15:40
A-10- A-10- A-10- A-10- A-10-2334-
2254-1 2539-2 2087-1 2278-2 1

3 15:40- 15:40- 15:40- 15:40- 15:40-

16:00 16:00 16:00 16:00 16:00
A-10- A-10-
 2593-1 A-10- 2102-1 A-10- A-10-2453-
2637-1 2041-1 2
4 16:00- 16:00- 16:00- 16:00- 16:00-
16:20 16:20 16:20 16:20 16:20
A-10- A-10- A-10- A-10- A-10-2563-
2492-3 2642-1 2516-1 2079-1 2

5 16:20- 16:20- 16:20- 16:20- 16:20-

16:40 16:40 16:40 16:40 16:40
A-10- A-10- A-10- A-10- A-10-2357-
2132-1 2616-1 2204-2 2248-1 2

Break, Exhibition
16:40-17:15

Thursday, 10 November 2022

Plenary Lectures
8:30-09:00 (Dr. M. Nekoomanesh)
09:00-09:30 (Dr. A. Zamani)
Break 09:30-10:00
Room 1 Room 2 Room 3 Room 4 Room 5
Polymers in
Polymer Covid19,
Rheology
Synthesis Biomedical and Green and
and Polymer
and Tissue Environment
Adhesives, Paints Processing
Polymerizatio Engineering ally
and Coatings
n Fibers, Films, Biopolymers
and Polymeric
Membranes
1 10:00- Keynote 10:00-10:20 10:00- Keynote
10:20 speaker A-10-2241-1 10:20 Speaker
 A-10- (Dr. A. Salimi) A-10- (Dr.
2530-1 10:00-10:30 2186-1 Goharpey)
10:00-
10:30

2 10:20- 10:30-10:50 10:20- 10:30-

10:20-10:40
10:40 A-10-2094-3 10:40 10:50
A-10-2639-1
A-10- A-10- A-10-
2572-1 2641-1 2030-1
3 10:40- 10:50-11:10 10:40-11:00 10:40- 10:50-
11:00 A-10-2162-1 A-10-2558-1 11:00 11:10
A-10- A-10- A-10-
2592-1 2209-3 2066-4

4 11:00- 11:10-11:30 11:00-11:20 11:00- 11:10-

11:20 A-10-2326-1 A-10-2573-1 11:20 11:30
A-10- A-10- A-10-
2076-2 2347-1 2481-1

5 11:20- 11:30-11:50 11:20-11:40 11:20- 11:30-

11:40 A-10-2563-1 A-10-2276-1 11:40 11:50
A-10- A-10- A-10-
2566-2 2084-1 2352-1

6 11:40- 11:50-12:10 11:40-12:00 11:40- 11:50-

12:00 A-10-2595-1 A-10-2079-2 12:00 12:10
A-10- A-10- A-10-
2538-1 2566-1 2564-1
7 12:00-12:20
A-10-2410-2
Exhibition, Lunch
12:00-14:00
 Important speech and closing ceremony
14:00-15:00

==================================================
====
*************************************************
Presentation
Note:
Authors are requested to submit their Extended Abstract through the
seminar website (http://www.ispst.ir) before submission deadline (23
July. 2022).
After accepting the article, you will be informed about the next steps.

Presented Oral
A-10- A novel epoxy/MXene nanocomposite adhesive in Adhesives,
2162- aluminum-aluminum bonded joints:Mechanical Paints and
1 properties and lap shear strength Coatings
A-10- Synthesis of Hybrid Graphene-Based Filler as a Adhesives,
2357- Promising Filler to Alter the Paints and
2 Hydrophobicity/Hydrophilicity of the Polymeric Coatings
Coatings
A-10- Evaluation of Surface Energy for CPP Film Using the Adhesives,
2334- Lifshitz-van der Waals/ Acide-Base Method Paints and
1 Coatings
A-10- Effect of silanized polyurethane content on adhesion Adhesives,
2094- properties of a polyurethane-acrylic hybrid adhesive Paints and
3 Coatings
A-10- Viscoelastic Properties of a Zinc Oxide-Filled Acrylate Adhesives,
2563- Pressure Sensitive Adhesive Paints and
1 Coatings
A-10- Evaluation of peel strength of a polyurethane/acrylic Adhesives,
2595- pressure-sensitive adhesive Paints and
1 Coatings
A-10- Zinc Oxide-Filled, Acrylate Pressure Sensitive Adhesives,
2563- Adhesive: Adhesion and Antibacterial Evaluations Paints and
2 Coatings
A-10- Passenger Tire Tread Formulation Based On Elastomers
2453- Silica/Carbon Black Hybrid Reinforcement System and
2 Compounding
Technologies
A-10- Novel graphene oxide semi-IPN nanocomposite Fibers, Films
2041- hydrogel based on partially hydrolyzed polyacrylamide: and Polymeric
1 preparation, swelling properties and adsorption studies Membranes
of cationic methylene blue dye from water
A-10- Fabrication and characterization of L-Asparagine Fibers, Films
2276- monohydrate functionalized-TiO2/PES nanofiltration and Polymeric
1 membrane with enhanced antifouling properties in Membranes
removal of dye pollution from water
A-10- Synthesis and characterization of novel poly(sulfone Fibers, Films
2278- urethane) based on urethane diol oligomer for and Polymeric
2 membrane desalination Membranes
A-10- Synthesis, characterization, and membrane desalination Fibers, Films
2079- application of a novel poly(sulfone sulfide) and Polymeric
1 Membranes
A-10- Synthesis and characterization of novel high Fibers, Films
2079- performance poly(sulfone-amid) alternative copolymers and Polymeric
2 for water desalination membranes Membranes
A-10- Preparation of PVDF-HFP Gel Polymer Electrolytes Fibers, Films
2410- with Honey Comb-Like Morphology Structure for and Polymeric
2 Lithium-Ion Battery Application Membranes
A-10- surface modification of silica nano particles by graft Fibers, Films
2509- polymerization of acrylamide and effect of the particles and Polymeric
1 on the gas separation properties of Pebax membrane Membranes
A-10- Synthesis and optimized electrospinning of oxidized Fibers, Films
2248- carboxymethyl cellulose and Polymeric
1 Membranes
A-10- beaded superabsorbent hydrogels based on Green and
2124- starch_g_poly(acrylic acid) assisted by cellulose Environmental
1 nanofibers for cu ions removal ly Sustainable
Biopolymers
A-10- Green Synthesis and characterization of micronization Green and
2186- Polylactide foam (lactirofoam) Environmental
1 ly Sustainable
Biopolymers
A-10- Quaternary ammonium containing Green and
2209- polyhydroxyurethane-graft-poly(ε-caprolactone) Environmental
1 nanofibers as an antibacterial wound dressing ly Sustainable
Biopolymers
A-10- Hybrid Non-isocyanate polyurethane surface modified Green and
2209- by gelatin as a wound dressing membrane Environmental
2 ly Sustainable
Biopolymers
A-10- Investigation of Thermal Behavior of Bulk-Aminolyzed Green and
2277- PLA with PAMAM Environmental
2 ly Sustainable
Biopolymers
A-10- Investigating the effects of non-clay on polymeric Green and
2351- edible coating based on psyllium mucilage Environmental
2 ly Sustainable
Biopolymers
A-10- Barrier properties of PLA/PBAT/Nanoclay Green and
2107- Bionanocomposite films for food packaging Environmental
2 ly Sustainable
Biopolymers
A-10- Immobilization of Laccase Nanoflower in Green and
2489- Polydopamine Biofilm for Biocathode Formation and Environmental
1 Its Integration with Glucose Dehydrogenase Bioanode ly Sustainable
in a Membrane-free of Glucose/O2 Biofuel Cell Biopolymers
A-10- Preparation and evaluation of antibacterial Green and
2209- PVA/Gelatin/NIPU wound dressing membranes Environmental
3 containing Guanidine hydrochloride moieties ly Sustainable
Biopolymers
A-10- Preparation and properties of biodegradable Green and
2320- nanocomposite foams based on PLA/PBAT/Nanoclay Environmental
1 ly Sustainable
Biopolymers
A-10- Extraction of cellulose nanofibers from paper pulp Green and
2360- using mechanical-chemical method Environmental
2 ly Sustainable
Biopolymers
A-10- Oxidized lignin cross-linked O-carboxymethyl chitosan Green and
2330- /aminosilane modified LDH for enhanced tetracycline Environmental
3 removal ly Sustainable
Biopolymers
A-10- Four different methods of acrylic acid grafting on PLA Green and
2277- nonwoven for further layer-by-layer modification Environmental
3 ly Sustainable
Biopolymers
A-10- Analyzing the Swelling Behavior of Persian Gum-g- Green and
2559- Polyvinyl Acetate Film Using Ternary Interaction Environmental
1 Parameter ly Sustainable
Biopolymers
A-10- Effect of Nano-clay incorporation on the mechanical Green and
2566- properties of nanocomposite IPNs based on Environmental
1 GelMA/Alginate/Nano-clay ly Sustainable
Biopolymers
A-10- Printability of GelMA/Alginate IPN reinforced by COF Green and
2570- for tissue engineering application Environmental
1 ly Sustainable
Biopolymers
A-10- Synthesis of reactive core-shell particles and their use Green and
2347- in toughening of poly(lactic acid) Environmental
1 ly Sustainable
Biopolymers
A-10- Effect of Oxidant Concentration on Intrinsic Viscosity Green and
2559- and Swelling Behavior of a Chemically Modified Environmental
2 Persain Gum (PG) in Water ly Sustainable
Biopolymers
A-10- Preparation and charecterisation of PLA/PBAT/pMDI Green and
2346- blends suitable for food packaging Environmental
1 ly Sustainable
Biopolymers
A-10- Green starch composite films reinforced bysecond- Green and
2641- generation bioethanol production byproduct Environmental
1 ly Sustainable
Biopolymers
A-10- Stabilizing Organized Surface Structures in Casting Nano-
2058- Solutions of Ionic Block Copolymer Membranes structured
1 Polymers and
Smart Systems
A-10- Preparation of thermochromic polymer based on Nano-
2265- rhodamine B for development of anticounterfeiting inks structured
1 Polymers and
Smart Systems
A-10- Post-Polymerization Modification of Amide Nano-
2322- Functionalized Copolymer Nanaoparticles with structured
2 Oxazolidine for Advanced Anticounterfeitng and Polymers and
Information Encryption Smart Systems
A-10- Preparation of light-responsive nanofibrous polymers Nano-
2379- structured
1 Polymers and
Smart Systems
A-10- The Effect of Acrylic Based Ionomer Gel Nano-
2335- Microstructure and Electrolyte Type on the Volume structured
2 Conductivity of Assembled Battery Separator Polymers and
Smart Systems
A-10- Mono-size Polyisocynate nanoparticles as the Nano-
2335- interfacial crosslinker of WPU/Acrylic core-shell structured
3 latexes to adhesively bond laminates Polymers and
Smart Systems
A-10- Fluorescent Polymer Nanoparticles as High-Security Nano-
2483- Anti-counterfeiting Ink structured
1 Polymers and
Smart Systems
A-10- Visualization of Latent Fingerprints by Powder Dusting Nano-
2394- of Spiropyran Copolymer Nanoparticles structured
1 Polymers and
Smart Systems
A-10- An Environmentally Friendly Adsorbent Aerogel with Polymer
2065- Outstanding Mechanical Performance Blends,
1 Composites
and Nano-
composites
A-10- Preparation and characterization of hybrid organic- Polymer
2125- inorganic nanoparticle/PVDF blends Blends,
1 Composites
and Nano-
composites
A-10- Preparation and properties of co-continuous Polymer
2231- PC/PET/MWCNT/GNP engineering polymer blend Blends,
1 nanocomposites Composites
and Nano-
composites
A-10- Investigating the effect of extruder die temperature on Polymer
2232- rheology-morphology relationship in Blends,
1 polypropylene/polyethylene terephthalate blend Composites
and Nano-
composites
A-10- Significant enhancement of Thermal conductivity in Polymer
2024- epoxy filled ceramic fillers Blends,
1 Composites
and Nano-
composites
A-10- Effect of Initial Silica Content on the Phase Polymer
2291- Composition, Morphology, and Thermal Oxidation Blends,
1 Kinetic of Novolac-based Carbon Aerogel Composites Composites
and Nano-
composites
A-10- Preparation of paraffin/CNT/PP aerogel composite as a Polymer
2299- new phase change material Blends,
1 Composites
 and Nano-
composites
A-10- Mechanical and rheological properties of Poly Lactic Polymer
2399- Acid (PLA) and Poly Butylene Succinate (PBS) Blends,
1 nanocomposites incorporating cellulose nanocrystals Composites
and Nano-
composites
A-10- Calendering Process of Bio-based Kenaf/Low Density Polymer
2159- Polyethylene Composites Sheets Blends,
3 Composites
and Nano-
composites
A-10- Conduction mechanism and dielectric properties of Polymer
2642- PP/EVA/MWCNTs nanocomposites in the presence of Blends,
1 PP-g-MA comatiblizer Composites
and Nano-
composites
A-10- Effect of Modified Carbon Fiber on Shape Stability and Polymer
2565- Leakage Reduction of Phase Change Systems Based on Blends,
1 Polyethyene Glycol Composites
and Nano-
composites
A-10- Morphological and rheological investigation of Polymer
2637- PP/PC/SBS/Clay nanocomposites Blends,
1 Composites
and Nano-
composites
A-10- Polystyrene/Poly(lactic acid) Janus particles prepared Polymer
2594- by emulsion solvent evaporation method Blends,
1 Composites
and Nano-
composites
A-10- The Effect of Wood Content and layer thickness on Polymer
2730- Tensile Properties of Wood Flour/ PLA Composites Blends,
1 Fabricated by FDM Composites
and Nano-
composites
A-10- Antibacterial Nanobiocomposite Hydrogels Based on Polymer in
2093- Polyphenolic Nanosheets Decorated with Ionic Liquid Biomedical
1 for Tissue Engineering and Tissue
Engineering
A-10- Poly(ionic liquid) based Antibacterial Hydrogels for Polymer in
2128- Wound Healing Biomedical
1 and Tissue
Engineering
A-10- Investigating the influence of UHMWPE fibers as a Polymer in
2047- toughening agent for PMMA in denture base Biomedical
2 and Tissue
Engineering
A-10- Fabrication of PLGA microcarriers with oxygen release Polymer in
2087- capability for bone tissue engineering Biomedical
1 and Tissue
Engineering
A-10- Investigation of polymerization temperature profile Polymer in
2204- of PMMA bone cement/nano-silica composite by Biomedical
2 infrared thermography and Tissue
Engineering
A-10- The effect of hydroxypropyl cellulose presence on the Polymer in
2071- morphology and physical properties of polyvinyl Biomedical
1 alcohol nanofibers and Tissue
Engineering
A-10- Effect of modified graphene oxide nano-plate on Polymer in
2569- mechanical properties of GelMA nanocomposite in Biomedical
1 tissue engineering and Tissue
Engineering
A-10- Fabrication of gelatin/ poly (vinyl alcohol)/ Polymer in
2359- carboxymethyl cellulose composite nanofibrous sponge Biomedical
2 for hemostatic application and Tissue
Engineering
A-10- Preparation of poly(L-lactic acid)/gelatin co- Polymer in
2309- electrospun nanofibers as potential products for Biomedical
1 biomedical applications and Tissue
Engineering
A-10- Investigation of the effect of chitosan on polyurethane Polymer in
2490- bioadhesive based on castor oil Biomedical
2 and Tissue
Engineering
A-10- Granular Hydrogels Composed of Modified Jammed Polymer in
2292- Microgels For 3D Printing Applications Biomedical
1 and Tissue
Engineering
A-10- Fabrication of nanofibrous Piezoactive bioscaffold Polymer in
2516- based on PVDF-GO/PLLA nanocomposite by hybrid Biomedical
1 electrospinning method and Tissue
Engineering
A-10- Introducing a nanocomposite transdermal patch: Polymer in
2558- Adhesion and ketoprofen release Biomedical
1 and Tissue
Engineering
A-10- Mimicking Mechanical Behavior of Human Tissue with Polymer in
2464- 3D Printable Elastomeric Hydrogel Biomedical
2 and Tissue
Engineering
A-10- Click for bioprinting: Development of autonomous Polymer in
2573- curable bioinks based on Diels-Alder click chemistry Biomedical
1 and Tissue
Engineering
A-10- Three Dimensionally Culture of Sheep Preantral Polymer in
2421- Follicles in a Thiolated Hyaluronic Acid Hydrogel Biomedical
1 and Tissue
Engineering
A-10- Fabrication and characterization of 3D bio-printed Polymer in
2102- electroconductive hydrogel scaffold based on Alginate Biomedical
1 and its application in cardiac tissue engineering and Tissue
Engineering
A-10- A Promising Success in the Full Regeneration of Polymer in
2400- Critical-Size Bone Defects Biomedical
1 and Tissue
Engineering
A-10- Rheological study of alginate-gelatin hydrogel for Polymer in
2606- tissue engineering bioprinting Biomedical
1 and Tissue
Engineering
A-10- The effect of the presence of Chondroitin sulfate on Polymer in
2273- porosity and mechanical properties of enzymatically Biomedical
2 cross linked silk fibroin/ chondroitin sulfate hydrogel and Tissue
Engineering
A-10- Interpenetrated network hydrogel based on GelMA/ Polymer in
2639- alginate and nano SiO2 Biomedical
1 and Tissue
Engineering
A-10- Control of hydrogen response for Polypropylene Polymer
2132- Obtained by Ziegler-Natta Catalyst: Effect of External Synthesis and
1 Donor Polymerizatio
n
A-10- Supercooling suppression of microencapsulated phase Polymer
2220- change materials (mPCMs) with melamine Synthesis and
1 formaldehyde shell by adding nucleating agent into the Polymerizatio
core material prior to encapsulation n
A-10- Enhanced CO2 capture on nitrogen-doped porous Polymer
2105- carbon materials derived from phenolic resins based on Synthesis and
1 deep eutectic solvent precursor Polymerizatio
n
A-10- Preparation and characterization of photochromic Polymer
2254- polymer nanoparticles for the development of highly Synthesis and
1 efficient anticounterfeiting nanoinks Polymerizatio
n
A-10- Synthesis of nanocellulose functionalized with pH- Polymer
2074- sensitive polymer to remove methylene blue from Synthesis and
1 wastewater Polymerizatio
n
A-10- Preparation of core–shell acrylonitrile-styrene-acrylate Polymer
2258- impact modifier particles through seeded emulsion Synthesis and
1 polymerization Polymerizatio
n
A-10- Synthesis of Water-Soluble Sulfonated Polyaniline Polymer
2286- (SPANI) and Investigation of Its Effect on the Short- Synthesis and
2 Circuit Current in the Perovskite Solar Cells Polymerizatio
n
A-10- Surface Engineering of Reduced Graphene Oxide by Polymer
2076- Grafting Poly(butyl acrylate) chains for Use in Synthesis and
2 Dielectric Polymer Nano-Composites Polymerizatio
n
A-10- Preparation of Polystyrene Microparticles by on-chip Polymer
2369- UV-Polymerization through Microfluidic Channels Synthesis and
1 Polymerizatio
n
A-10- Experimental Investigation on Morphological Polymer
2318- Characteristics and Stability of Poly(vinyl chloride) Synthesis and
1 Microspheres by Microsuspension Polymerization Polymerizatio
n
A-10- Cellulose-based recyclable polymer electrolytes Polymer
2407- Synthesis and
1 Polymerizatio
n
A-10- Investigation of effective parameters on cloud point of Polymer
2403- poly(acrylamide-co-acrylonitrile) in aqueous solutions Synthesis and
2 Polymerizatio
n
A-10- Synthesising Iron Oxide Silica Gelatin Polymer
2566- Nanoparticles Synthesis and
2 Polymerizatio
n
A-10- Polyurethane Rigid Foam Synthesis Using Response Polymer
2419- Surface Methodology(RSM); Morphological Study Synthesis and
1 Polymerizatio
n
A-10- Synthesis and characterization of poly(aniline-co- Polymer
2398- carbazole) Fe3O4 magnetic nanocomposite for X- Synthesis and
1 band microwave shielding application Polymerizatio
n
A-10- Synthesis and characterization of 2D layered Cu-pPDA Polymer
2492- coordination polymer Synthesis and
3 Polymerizatio
n
A-10- Synthesis of imidazolium-based polymeric ionic liquid Polymer
2530- as supercapacitor active material Synthesis and
1 Polymerizatio
n
A-10- Stimuli-Responsive PAMAM Dendritic Polymer
2538- Macromolecules for Optical Detection of Food Synthesis and
1 Spoilage Polymerizatio
n
A-10- Water absorption and thermal stability of waterborne Polymer
2562- polyurethaneacrylate/nanoclay films Synthesis and
1 Polymerizatio
n
A-10- Synthesis of novel triazole-based poly vinyl Polymer
2592- imidazolium Ionic liquid for demulsification of water in Synthesis and
1 crude oil emulsions Polymerizatio
n
A-10- Kinetic study of Butyl Acrylate Solution Polymer
2593- Polymerization at High Temperature Synthesis and
1 Polymerizatio
n
A-10- Titanium-Silasequioxane Coordination Compound as a Polymer
2508- Heterogeneous, Thermally Stable Catalyst: Synthesis Synthesis and
3 and Characterization Polymerizatio
n
A-10- Ethylene-Propylene copolymerization using Polymer
2572- Et(Ind)2ZrCl2 metallocene catalyst: Synthesis and Synthesis and
1 Microstructure Analysis Polymerizatio
n
A-10- Monitoring the effect of initiator, stabilizer, and Polymer
2039- water/alcohol medium on the conversion of synthesized Synthesis and
2 polystyrene by dispersion polymerization method by Polymerizatio
Design Expert software n
A-10- Electrospinning of Polymeric
2084- Polyhydroxybutyrate/Lignin/Cellulose-nanofibers Bio- Materials for
1 nanocomposite Scaffold for Bone Tissue Engineering Medical Care
Application in the COVID-
19 Pandemic
A-10- The potential of PIM-1/nano silver air separation Polymeric
2241- membranes application in the production of the face Materials for
1 masks in the COVID-19 pandemic Medical Care
in the COVID-
19 Pandemic
A-10- Rheological behavior of poly(lactic acid)/ silicon Rheology and
2066- rubber/ Silicon Modified Graphene Oxide Polymer
4 Processing
A-10- Pitch Mesophase Common Rheological Behaviors Rheology and
2257- Polymer
2 Processing
A-10- The solid state rheological investigation of core-shell Rheology and
2030- impact modifier nanoparticles efficacy: 3-D networking Polymer
1 Processing
A-10- The rheological characterization of different Rheology and
2352- concentrations of bacteria in the polymer solution Polymer
1 Processing
A-10- Modification of Polypropylene-graft-Maleic Anhydride Rheology and
2481- with Epoxy by Reactive Extrusion for Preparation of Polymer
1 High-Melt-Strength Polypropylene Processing
A-10- Studying Rheology of the FENE-P Chains Using a Rheology and
2501- Micro-Macro Approach Polymer
1 Processing
A-10- Influence of molecular weight, molecular weight Rheology and
2564- distribution, random and impact co-polymerization on Polymer
1 the rheological behavior of polypropylene Processing
A-10- Chemorheological Characterization of HTPB Based Rheology and
2539- Polyurethane Formulations Containing Different Chain Polymer
2 Extender Contents Processing
A-10- Simulation of Rubber Hose Curing Simulation
2263- and Modeling
1
 of Polymeric
System
A-10- The Abnormal Analysis of Number Average Molecular Simulation
2219- Weight of Sulfonated Melamine Formaldehyde (SMF) and Modeling
1 of Polymeric
System
A-10- New Protocol For Modeling of Thermal Degradation Simulation
2138- Kinetics of Epoxy Nanocomposites and Modeling
1 of Polymeric
System
A-10- Modeling and Temperature Control of Isocyanate- Simulation
2257- Water Side Reactions and Modeling
1 of Polymeric
System
A-10- Multiscale Modeling Approach to Predict the Simulation
2453- Mechanical Behavior of elastomer nanocomposites and Modeling
1 of Polymeric
System
A-10- The Effect of Bulk Acoustic Waves on Glass Bead Simulation
2336- Dispersion Inside The 3D Prinint Resin Materials and Modeling
1 of Polymeric
System
A-10- A novel approach for synthesis of zwitterionic Simulation
2525- polyurethane coatings through molecular dynamics and Modeling
1 simulation study of Polymeric
System
A-10- Space State Temperature Control of poly(butylene Simulation
2510- succinate) esterification reactions and Modeling
2 of Polymeric
System
A-10- Numerical Study on The Effect of The viscosity on Simulation
2659- The Pinch-Off Behavior of The Droplet in Drop and Modeling
1 Formation Process of Polymeric
System
A-10- The Origin of Charge Transport Synergism in the Simulation
2662- Hybrid of Geometrically Anisotropic and Conductive and Modeling
1 Nanoparticles: A Monte Carlo Simulation Study
 of Polymeric
System
A-10- Oxygen permeation rate through PBAT: a molecular Simulation
2418- dynamics simulation and Modeling
2 of Polymeric
System

==================================================
===
Poster
Poster Information
- Poster display is 90 cm tall by 60 cm wide, which is known as
"Portrait" format – see Poster Presentations Layout
- You should prepare the poster in English and use the Poster Template
for more uniformity.
- The title should be about 40 cm long in bold font.
- Limit the number of font types
-The following sections should be included in your poster:

 Title, authors and their Institutions.

 Abstracts
 Introduction
 Experimental
 Result and discussion
 Conclusion
 References
 Tables and figures

Notes:
1. The poster must be placed in the allocated panel by the own
presenter on November 8, 2022.
2. All posters will be presented within the seminar days 8-10
November.

Presented Posters

A- Various co-polymers of MBA-poly(N-vinyl-2- Adhesives,

10- pyrrolidone) macromolecular coordination complex as a Paints and
2041 novel and recyclable Lewis acid catalyst: synthesis, Coatings
-2 characterization, and performance towards well-know
organic reaction
A- The Effect of Crosslinker on Glass Transition Adhesives,
10- Temperature and Crystallinity During Synthesis of Liquid Paints and
2052 Crystalline Elastomers Coatings
-1
A- Synthesis and Curing of Thermoset Bismaleimide Resin Adhesives,
10- Based on Epon 828 Epoxy Resin Paints and
Coatings
2062
-1
A- Monitoring the Curing Process of Bismaleimide / Epoxy Adhesives,
10- Blend by FT-IR Spectroscopy Paints and
2029 Coatings
-1
A- Synthesis and characterization of corrosion resistance and Adhesives,
10- superhydrophobic fluorine-based coating via sol-gel Paints and
2044 process Coatings
-1
A- Emulsion Copolymerization of Acrylic Monomers to Adhesives,
10- Prepare Pressure Sensitives Adhesive (PSA): Effect of Paints and
2113 Triethylamine (TEA) as an Adhesion Promoter on Coatings
-1 Mechanical Properties
A- Investigation Rate Constant of isocyanate blocking Adhesives,
10- reaction as coupling agent Paints and
2088 Coatings
-1
A- Prediction of TDI-Based Polyaspartic Polyurea’s Adhesives,
10- Abrasion Resistance Paints and
2036 Coatings
-2
A- Development of a two-part acrylic adhesive with high Adhesives,
10- thermal resistance Paints and
2141 Coatings
-1
A- Synthesis of an Eco-friendly multifunctional fluorinated Adhesives,
10- urethane-acrylate resin as a promising UV-cured coating Paints and
2112 for anticorrosive applications Coatings
-1
A- Investigation of substitute extenders of titanium dioxide Adhesives,
10- by Barium sulfate and Aluminum silicate in order to use Paints and
2195 in rezins coatings Coatings
-1
A- Effect of Graphite Oxide on Hydrophobicity of Epoxy Adhesives,
10- Resin Coatings Paints and
2121 Coatings
-1
A- Hydrophobicity Achievement of Polyurethane Coating Adhesives,
10- Using Nano-Silica and Teflon Powders Paints and
2235 Coatings
-1
A- Improving the anti-corrosion performance of Adhesives,
10- hydroxyapatite-based coating in the presence of an Paints and
2205 organic modifier Coatings
-2
A- Preparation of self-healing and anticorrosive epoxy Adhesives,
10- coatings loaded with various inhibitor doped PANI Paints and
2112 nanofibers Coatings
-2
A- The effect of graphene quantum dots on the stability of Adhesives,
10- graphene-based conductive inks Paints and
2357 Coatings
-1
A- Preparation and Evaluation of Water-in-Soybean Oil Adhesives,
10- Emulsions Paints and
2357 Coatings
-3
A- Synthesis of a novel bisphotochromic dye based on 1,3- Adhesives,
10- Diazabicyclo[3.1.0]hex-3-ene Paints and
2364 Coatings
-1
A- Eco-friendly UV-cured AMPS doped polyaniline-urethane Adhesives,
10- methacrylate coating as a corrosion protection coating Paints and
2367 Coatings
-1
A- Adhesion properties of a polyurethane-acrylic hybrid Adhesives,
10- adhesive synthesized through modification of polyol with Paints and
2094 a silane coupling agent Coatings
-2
A- The effect of PVP Molecular weight and Synthesis Adhesives,
10- Temperature on Silver Nanowire Morphology Paints and
2409 Coatings
-1
A- Synthesis of the uv curable anticounterfeiting ink based on Adhesives,
10- waterbased urethane acrylate resin, modified with Paints and
2468 Rhodamin B Coatings
-1
A- Synthesis and evaluation of optical and adhesion Adhesives,
10- properties of a fluorescent pressure-sensitive adhesive Paints and
2498 Coatings
-1
A- CO2 adsorption of PET fabric coated with graphene oxide Adhesives,
10- Paints and
2391 Coatings
-1
A- Synthesis of water-based acrylic resin modified with Adhesives,
10- epoxy resin to improve printability properties of coatings Paints and
2519 on PVC substrate Coatings
-1
A- Synthesis, characterization and properties of UV cured Adhesives,
10- and UV resistant polyurethane acrylate nano-composite Paints and
2532 coatings, modified by ZnO-based nanoparticles and Coatings
-1 Tinuvin 292
A- Synthesis of three novel silane-based carboxylic acids for Adhesives,
10- application in methacrylated epoxy-based oligomers and Paints and
2548 their ability in the UV curable hybrid coatings Coatings
-1
A- Studying the effect of changing the amino number of Adhesives,
10- curing agent on the properties of antifouling coating of E- Paints and
2579 PVC reactors in Arvand petrochemical complex Coatings
-1
A- A Comparative study on adhesion properties of Adhesives,
10- polyurethane hot-melt adhesives, including C5 and C9 Paints and
2522 hydrocarbon tackifiers Coatings
-2
A- Preparation of a Magneto-Responsive Acrylic Pressure- Adhesives,
10- Sensitive Adhesive Paints and
2601 Coatings
-1
A- Investigation of the Effect of Mixing Time and Speed on Elastomers and
10- the Glass Transition Temperature of Tire Tread Filled Compounding
2063 with Nanoparticles Technologies
-1
A- Preparation of Elastomeric Sound Absorber Flexible Thin Elastomers and
10- sheets via Devulcanized Tire Wastes Compounding
2054 Technologies
-1
A- Graphene Oxide/Silicon Rubber/PLA as a Conductive Elastomers and
10- Thermoplastic Vulcanizates Compounding
2066 Technologies
-3
A- Chemical and Mechanical Assessment of Peroxide Cured Elastomers and
10- EPDM for Fuel Cell Gasket Application Compounding
2228 Technologies
-3
A- The Effect of Fumed Silica and ATH on the Vulcanization Elastomers and
10- and Mechanical Properties of Silicone Rubber Compounding
2250 Technologies
-1
A- Effect of water infiltration rate on mechanical properties Elastomers and
10- of heat-treated crumb rubber containing cementitious Compounding
2247 mortar Technologies
-2
A- Analyzing the Role of Interface in Creep Resistance of Elastomers and
10- Natural Rubber-Silica Composites Compounding
2298 Technologies
-1
A- Influence of Molecular Microstructure of Solution- Elastomers and
10- polymerized Styrene-butadiene Rubber Types on Compounding
2261 Vulcanization Kinetics Technologies
-1
A- Comparison the Effect of OPS vs. MWCNT on Elastomers and
10- Mechanical and Ablation Behavior of EPDM Compounding
2316 Nanocomposites Technologies
-1
A- How Does Modification of interface by a Long Chain Elastomers and
10- Silane Alter Gas Transport in NBR/Silica Composites? Compounding
2301 Technologies
-1
A- Effect of Reduced Graphene Oxide on Cure Kinetics of Elastomers and
10- Polydimethylsiloxane Compounding
2284 Technologies
-1
A- Investigating the Impact of Bound Rubber on Cavitation Elastomers and
10- Resistance of Silica-Reinforced NBR Composites Compounding
2301 Technologies
-2
A- Curing characteristics and mechanical properties of Elastomers and
10- (styrene butadiene rubber /ethylene propylene diene Compounding
2315 monomer)blend in the presence of a hybride of carbon Technologies
-1 black and nanocalay
A- Effects of recycled nanosilica on the cure properties and Elastomers and
10- wear resistance of the green tire Compounding
2494 Technologies
-1
A- Studying the microstructures of Hydroxyl-terminated Elastomers and
10- polybutadiene and Hydrobrominated Hydroxyl-terminated Compounding
2185 polybutadiene using NMR analysis Technologies
-1
A- Elastomeric nanocomposite based on SR/ IIR/ Silica Elastomers and
10- Nanoparticles(SiNP): Design, preparation and Compounding
2162 characterization Technologies
-2
A- Compatibility Study and Mechanical Properties of Nitrile Elastomers and
10- rubber/Ethylene- Propylene-Diene Rubber Blends Compounding
2496 Technologies
-1
A- Self healable Diels-Alder Crosslinked Polyurethane Elastomers and
10- Elastomers Based on Furane Modified Calix[4]arene Compounding
2517 Technologies
-1
A- Silicone Rubber Compounds as Sealant for Polymer Fuel Elastomers and
10- Cells: A Study of Curing systems and Nanoparticle Compounding
2578 Properties Technologies
-2
A- The Effect of Chopped Carbon Fiber on Ablative Elastomers and
10- Behaviour of EPDM Based Elastomeric Insulation Compounding
2274 Technologies
-1
A- The role of carbon black as the secondary filler in Elastomers and
10- improving non-linear viscoelastice behavior of styrene- Compounding
2487 butadiene rubber compound filled with modified silica Technologies
-1
A- Effect of Secondary to Primary Accelerator Ratio on Elastomers and
10- Curing, Mechanical and Ablation Behavior of Elastomeric Compounding
2608 Composite Based on EPDM Technologies
-1
A- Curing haracteristics and mechanical properties of Elastomers and
10- NR/CR/SBS blends Compounding
2724 Technologies
-1
A- Investigating the properties of Teflon nanocoatings Fibers, Films
10- containing Zinc nanoparticles on the steel surface and Polymeric
2047 Membranes
-1
A- TFC organic solvent nanofiltration membrane fabricated Fibers, Films
10- by a novel HDPE membrane support covered by and Polymeric
2126 manganese dioxide /Tannic acid-Fe (III) layers Membranes
-1
A- Preparation of Polyvinyl pyrrolidone Fibers, Films
10- (PVP)/carboxymethyl starch (CMS) hydrogel for and Polymeric
2137 excellent absorption of wound secretions Membranes
-1
A- Sulfonated Aromatic Polymers and Organically Modified Fibers, Films
10- Montmorillonite Nanocomposite Membranes for Fuel and Polymeric
2125 Cells Applications Membranes
-3
A- Fabrication of electrospun polyvinylalcohol nanofiber Fibers, Films
10- containing Ferula assa-foetida gum extract and and Polymeric
2115 investigating its antibacterial properties Membranes
-1
A- Polyelectrolyte Membrane Based on Chitosan Blend for Fibers, Films
10- Direct Methanol Fuel Cell Application and Polymeric
2228 Membranes
-4
A- Investigating The Effect of Imidazole on Electrochemical Fibers, Films
10- Properties of Sulfonated Polystyrene Membrane for Direct and Polymeric
2228 Methanol Fuel Cell Application Membranes
-5
A- Investigating the Effect of Silica Nanoparticles Modified Fibers, Films
10- by Dendrimer on Performance of Polycarbonate Thin and Polymeric
2249 Film Nanocomposite Membranes in Submerged Membranes
-1 Membrane Systems for Waste Water Treatment
A- Amino functionalized ZnO nanoparticles were Fibers, Films
10- incorporated to a polycarbonate/polyvinyl alcohol thin and Polymeric
2249 film membrane to improve water treatment Membranes
-2
A- Study on the Effect of Processing Parameters and LLDPE Fibers, Films
10- Concentration on the Haze of LDPE/LLDPE Blown Films and Polymeric
2267 Membranes
-2
A- Dye rejection by nanofiltration membrane based on Fibers, Films
10- polysulfone and bohemite particles modified with lysine and Polymeric
2276 Membranes
-2
A- Fabrication and modification of PVDF mixed matrix Fibers, Films
10- ultrafiltration membranes by PEG and PVP hydrophilic and Polymeric
2276 polymers Membranes
-3
A- In situ green synthesis of copper nanoparticles on nylon Fibers, Films
10- with Safflower extract and Polymeric
2280 Membranes
-2
A- Fabrication and Characterization of High Modulus Fibers, Films
10- Composites as End Plate for Polymer Electrolyte and Polymeric
2216 Membrane Fuel Cell Application Membranes
-1
A- Electrospinning of polymer solutions containing silica- Fibers, Films
10- poly (caprolactone) and Polymeric
2068 Membranes
-2
A- The synergetic antibacterial effects of amine terminated Fibers, Films
10- dendritic groups/ cationic gemini surfactant on cotton and Polymeric
2456 goods Membranes
-1
A- Investigating electrospinning conditions on the Fibers, Films
10- mechanical properties of polyamid (PA) fibers and Polymeric
2237 Membranes
-3
A- Hydrazone-linked covalent organic framework PSf/PVP Fibers, Films
10- mixed matrixed membrane: A new approach to dye and Polymeric
2344 wastewater purification Membranes
-1
A- Fabrication and characterization of Polyvinylidene Fibers, Films
10- Fluoride Nanofiltration Membrane for Wastewater and Polymeric
2473 Treatment Membranes
-2
A- Polyurethane / cellulose /activated carbon nanocomposite Fibers, Films
10- membranes for removal of methylene blue from water and Polymeric
2378 Membranes
-1
A- Surface Modification of Polypropylene Hollow Fiber Fibers, Films
10- Ultrafiltration Membrane by plasma and polyethylene and Polymeric
2416 glycol Membranes
-1
A- Investigation of solvent system Effect on alginate Fibers, Films
10- sulfate/polyvinyl alcohol electrospun nanofibers and Polymeric
2414 Membranes
-1
A- Using polyaniline/montmorillonite adsorbent Fibers, Films
10- nanocomposite to remove tannic acid pollutant from water and Polymeric
2390 environment Membranes
-2
A- Preparation and Properties of Blend Membranes of Highly Fibers, Films
10- Sulfonated Polysulfone/Fully Fluorinated Poly(Aryl and Polymeric
2480 Ether) for Proton Exchange Membrane Fuel Cell Membranes
-1 Application
A- Effect of Sulfonation Degree and Thermal Treatment on Fibers, Films
10- the Stability and Proton Conductivtiy of Blend and Polymeric
2480 Membranes of Highly Sulfonated Polysulfone/Fully Membranes
-2 Fluorinated Poly(Aryl Ether) for Fuel Cell Application
A- Preparation and Properties of Polycarbonate/ Polysulfone Fibers, Films
10- Blend Membranes for Potential Application in Water and Polymeric
2480 Tretment Membranes
-3
A- Design and Characterization of Electrospun PVDF Fibers, Films
10- Nanofibers Containing Graphene Oxide/Metal-Organic and Polymeric
2122 Framework Composites for Potential Piezoelectric Membranes
-1 Applications
A- Application of PNANI/MWCNT/Cu Nanofibrous Fibers, Films
10- Electrode in Detection of Nitrate Ions and Polymeric
2109 Membranes
-1
A- Synthesis of thermoplastic polyurethane membranes with Fibers, Films
10- different molar ratios and investigation of their and Polymeric
2106 CO2/N2/H2 gases permeability Membranes
-1
A- Polyurethane / cellulose /activated carbon nanocomposite Fibers, Films
10- membranes for removal of basic violet 16 from water and Polymeric
2378 Membranes
-2
A- Fabrication of Zirconium Oxide Complex Bridged Fibers, Films
10- by Terephthalic Ligands (UIO66)-PVDF Mixed Matrix and Polymeric
2523 Membrane for Lithium Ion Battery Separator Membranes
-1
A- The effect of Mg-Al layered double hydroxide Fibers, Films
10- nanoparticles on the performance of polycarbonate and Polymeric
2576 membranes in water treatment Membranes
-1
A- Preparation of hydrogel nanofibers of lignin through Fibers, Films
10- electrospinning and Polymeric
2591 Membranes
-1
A- Evaluation of Electrolyte role on the Surface Properties of Fibers, Films
10- Synthetic Fiber by a Chemical Process and Polymeric
2162 Membranes
-3
A- Investigating the effect of Cu nanoparticles on the Fibers, Films
10- absorption of basic dyes on PAN nanofibers and Polymeric
2618 Membranes
-1
A- Preparation of micro-nano structure from polyacrylonitrile Fibers, Films
10- (PAN) by electrospun and selective removal and Polymeric
2557 Membranes
-1
A- Surface modification of Poly Ether Block Amide Fibers, Films
10- membrane – The Role of amine compounds in carbon and Polymeric
2638 dioxide gas separation properties Membranes
-1
A- Study of Surface Modification of Pebax-2533 Membrane Fibers, Films
10- by Mediocrity-Sized Amine Compounds on CO2 Gas and Polymeric
2638 Separation Properties Membranes
-2
A- Zeolitic imidazolate frameworks (Zif 67) Mixed Matric Fibers, Films
10- Membrane in CO2 Separation: Fabrication and and Polymeric
2523 Permeability Study Membranes
-2
A- Flexible cation exchange membrane based on modified K- Fibers, Films
10- Carrageenan/PVA double network hydrogel with high and Polymeric
2734 ionic conductivity Membranes
-1
A- Mimicked Tri-layer Scaffold for Chemo-Photothermal Green and
10- Therapy of Breast Cancer Cells Environmentall
2035 y Sustainable
-1 Biopolymers
A- Accelerated wound healing through a Poly-vinyl Green and
10- alcohol/chitosan/honey/clay nanocomposite hydrogel Environmentall
2096 wound dressing y Sustainable
-1 Biopolymers
A- Toughness enhancement of Poly(lactic) acid as a Green and
10- biopolymer by the use of Polybutadiene rubber Environmentall
2110 y Sustainable
-1 Biopolymers
A- Chemo-Phototherapy of Breast Cancer Cells by Dopamine Green and
10- Nanoparticles Embeded in Alginate Hydrogels Environmentall
2035 y Sustainable
-2 Biopolymers
A- LLDPE/Cellulose Microfiber/Nanoclay Nanocomposites Green and
10- Based on Insitu Intercalated Nanoclay Environmentall
2107 y Sustainable
-1 Biopolymers
A- Environmental aspects of using seawater-based polymer Green and
10- systems in improving water-based drilling fluids Environmentall
2049 properties y Sustainable
-1 Biopolymers
A- The effect of eggshell powder on biodegradability and Green and
10- permeation of PLA Films Environmentall
2617 y Sustainable
-2 Biopolymers
A- The green synthesis of silver nanoparticles on cotton Green and
10- fabrics by Henna leaves extract Environmentall
2280 y Sustainable
-1 Biopolymers
A- Morphological and mechanical properties of Green and
10- PLA/PBAT/Nanoclay Bionanocomposite films for food Environmentall
2107 packaging y Sustainable
-3 Biopolymers
A- Alginate/citric acid-sawdust/Fe3O4 bio-adsorbent for Green and
10- malachite green removal from aquatic solutions Environmentall
2362 y Sustainable
-1 Biopolymers
A- Investigation on mechanical properties of basil seed gum/ Green and
10- graphene oxide nanocomposite Environmentall
2283 y Sustainable
-1 Biopolymers
A- Hybridization of graphene oxide with tragacanth gum to Green and
10- diminish its cytotoxicity effect Environmentall
2283 y Sustainable
-2 Biopolymers
A- Investigation of the microstructure, mechanical properties, Green and
10- biodegradability of nanocomposites of PCL/GO-ZnO Environmentall
2392 y Sustainable
-1 Biopolymers
A- Fabrication of Alginate-carboxymethyl cellulose blend Green and
10- beads via Titanium(IV) oxide/Covalent organic Environmentall
2297 frameworks hybrids under ultrasonic irradiation y Sustainable
-1 Biopolymers
A- Production of biodegradable polylactic acid polymer from Green and
10- agricultural waste Environmentall
2142 y Sustainable
-2 Biopolymers
A- Effect of PLA on tensile properties of soft PVC Green and
10- Environmentall
2476 y Sustainable
-1 Biopolymers
A- Synthesis of green magnetic biopolymer tannin gel in the Green and
10- simultaneous removal of Malachite green and Sunset Environmentall
2472 Yellow dyes y Sustainable
-2 Biopolymers
A- Manufacturing and Characterizing of Interpenetrating Green and
10- Polymer Network Films Based on Carboxymetheyl Environmentall
2545 Cellulose and Tetraethylorthosilicate y Sustainable
-1 Biopolymers
A- An assessment on morphological and thermal properties Green and
10- of the poly (lactic acid)/poly (butylene adipate-co- Environmentall
2646 terephthalate) films with chain extender y Sustainable
-1 Biopolymers
A- Effects of Lauroyl Peroxide on Structural Modification Green and
10- and Physical Properties of Polylactic Acid Environmentall
2463 y Sustainable
-3 Biopolymers
A- Preparation and properties of biodegradable Green and
10- PLA/PBAT/Nanoclay nanocomposite Environmentall
2513 y Sustainable
-1 Biopolymers
A- Performance evaluation of clarithromycin-loaded poly (ε- Nano-
10- caprolactone) nanoparticles: A comparison between structured
2052 microfluidic and bulk mixing methods Polymers and
-3 Smart Systems
A- Transparent film heater based on silver nanowires Nano-
10- structured
2021 Polymers and
-1 Smart Systems
A- Preparation and characterization of propargylated Nano-
10- electrospun cellulose acetate nanofibers as precursor for structured
2052 click chemistry Polymers and
-4 Smart Systems
A- Chitosan-based Microneedle Patches containing Insulin- Nano-
10- Cyclodextrin for Sustained Transdermal Delivery structured
2044 Polymers and
-2 Smart Systems
A- Synthesis and Characterization PVA Electro-Spun Nano-
10- Nanofibers Containing Encapsulated Vitamin C in structured
2044 Chitosan Microspheres Polymers and
-3 Smart Systems
A- Preparation of thermoswitchable chromic nanocapsules Nano-
10- containing leuco-dye via miniemulsion polymerization structured
2131 Polymers and
-1 Smart Systems
A- Thermo- and photo-switchable nanocapsules containing Nano-
10- leuco-dye mixture and spiropyran structured
2131 Polymers and
-2 Smart Systems
A- Covalent triazine-based framework as a pH-dependent Nano-
10- sustained-release nanocarrier for anticancer drug structured
2201 Polymers and
-1 Smart Systems
A- A comparative review of the performance of different Nano-
10- nanopolymers in improving the properties of drilling structured
2049 fluids Polymers and
-3 Smart Systems
A- Synthesis of organo-soluble gold nanoparticles on Nano-
10- poly(N,N-dimethyl aminoethyl methacrylate) structured
2269 Polymers and
-1 Smart Systems
A- Superhydrophobic polyurethane foams coated with Nano-
10- Flurobutanol modified rGO nanosheets for effective structured
2272 continuous oil-water separation Polymers and
-1 Smart Systems
A- Effects of polarity and functionality on optical properties Nano-
10- of fluorescent polymer nanocarriers structured
2279 Polymers and
-1 Smart Systems
A- Development of pH sensing light-responsive polymer Nano-
10- nanoparticles structured
2256 Polymers and
-1 Smart Systems
A- Polyaniline nanoparticles suspension: Ion exchange Nano-
10- behavior structured
2302 Polymers and
-1 Smart Systems
A- Effect of the Structure of Activated Carbon on the Nano-
10- Absorption Property structured
2056 Polymers and
-1 Smart Systems
A- Enhancement of the PVDF’s Piezoelectricity by magnetic- Nano-
10- conductive hybrid nanoparticle-nanoplates structured
2314 Polymers and
-1 Smart Systems
A- Reduction-sensitive flower like magnetomicelle based on Nano-
10- PCL-ss-PEG-ss-PCL triblock copolymer as anti-cancer structured
2319 drug delivery system Polymers and
-1 Smart Systems
A- Preparation of tosyl cellulose acetate nanoparticles via Nano-
10- nanoprecipitation structured
2324 Polymers and
-1 Smart Systems
A- Investigation of Effect of Electrospinning Parameters on Nano-
10- Morphology of Polyvinyl Alcohol Nanofibers structured
2332 Polymers and
-1 Smart Systems
A- The Influence of Electrospinning Parameters on Nano-
10- Morphological Properties of Polyamide-6,6 Nanofibers structured
2332 Polymers and
-2 Smart Systems
A- Acidichromic behavior of N,N-dihydroxyethyl Nano-
10- azobenzene doped in poly(methyl methacrylate) structured
2549 Polymers and
-1 Smart Systems
A- Synthesis of Spiropyran Functionalized Polymer Nano-
10- Nanoparticles and Investigation the Effect of Local structured
2395 Polarity on Kinetics of Photoresponsivity Polymers and
-1 Smart Systems
A- Aqueous Electrospinning of Carboxymethyl Chitosan Nano-
10- sulfate/Polyethylene Oxide Nanofibers structured
2342 Polymers and
-1 Smart Systems
A- Fabrication of drug-carrying nanocomposites from Nano-
10- polylactic acid, polyethylene glycol and hydroxyapatite structured
2383 Polymers and
-2 Smart Systems
A- Study on the preparation, properties, and performance of Nano-
10- new superparamagnetic nanocomposite of PANI-Fe3O4- structured
2472 TiO2 in polymer solar cells Polymers and
-1 Smart Systems
A- The Release Behavior of Tetracycline hydrochloride Nano-
10- (TCH) from Carboxymethyl Chitosan (CMCS)/ structured
2200 Montmorrilonite (MMT) Microcapsules Polymers and
-1 Smart Systems
A- Chamomile Extracted Polyphenol Based Nanoparticles Nano-
10- Made by Oxidative Coupling Assembly structured
2384 Polymers and
-2 Smart Systems
A- Synthesis and Characterization of Reversible Nano-
10- Photochromic Spiropyran Containing Ionic Liquid structured
2504 Polymers and
-2 Smart Systems
A- Wearable electronic nose sensor based on PVDF/ carbon Nano-
10- black electrospun layers structured
2385 Polymers and
-3 Smart Systems
A- Synthesis of Amide Functionalized Photoluminescent Nano-
10- Polymer Nanoparticles Containing Oxazolidine for structured
2528 Development of Photoluminescence OLEDs Polymers and
-1 Smart Systems
A- Preparation of dual emission MXene derived quantum Nano-
10- dots structured
2535 Polymers and
-1 Smart Systems
A- Surface modification of silica aerogel nanostructure by Nano-
10- citric acid for wastewater treatment structured
2459 Polymers and
-1 Smart Systems
A- Investigation the Effect of Polymer Chain Flexibility on Nano-
10- Kinetics of Spiropyran Photochromism in Copolymer structured
2393 Nanoparticles Polymers and
-2 Smart Systems
A- Biodegradable Thermoplastic Vulcanizate Nanocomposite Nano-
10- with Thermoresponsive Shape Memory Behavior Based structured
2486 on PLA/NBR/CNC Polymers and
-1 Smart Systems
A- Investigation of the strain sensing performance of Nano-
10- PP/EPDM/CNT nanocomposites structured
2347 Polymers and
-3 Smart Systems
A- Fabrication of Self-Healing Hydrogels Through Inclusion Nano-
10- Complexation of Vinyl Modified Macrocyclic Monomers structured
2590 Polymers and
-1 Smart Systems
A- Supramolecular Hydrogels Using Host-Guest Inclusion Nano-
10- Complexes with Cyclodextrins structured
2603 Polymers and
-1 Smart Systems
A- Modification of cellulose paper with photoluminescent Nano-
10- acrylic copolymer nanoparticles containing fluorescein as structured
2609 pH-sensitive indicator Polymers and
-1 Smart Systems
A- Fluorescent Polymer Nanoparticles as pH Sensor Nano-
10- platforms structured
2635 Polymers and
-1 Smart Systems
A- Determining the pKa value of the fourth generation Nano-
10- poly(propylene imine) dendrimer functionalized with 4- structured
2660 carboxyphenylboronic acid by pH titration method Polymers and
-2 Smart Systems
A- Preparation and characterization of semi-IPN magnetic Polymer
10- nanocomposite hydrogels based on partially hydrolyzed Blends,
2041 polyacrylamide/guar gum/ Fe3O4 SiO2 NPS for Composites
-3 enhanced oil recovery
 and Nano-
composites
A- Preparation of Flexible shields for Protection against Polymer
10- Gamma Rays Blends,
2057 Composites
-1 and Nano-
composites
A- Preparation and investigation the properties of graphene- Polymer
10- reinforced nanocomposites based on PMMA/PEO Blends,
2083 Composites
-1 and Nano-
composites
A- Preparation and X_COM simulation of X-ray epoxy-based Polymer
10- polymer shielding Blends,
2082 Composites
-1 and Nano-
composites
A- Gel polymer electrolyte based on synthsised organic- Polymer
10- inorganic nanoparticles/PVDF Blends,
2125 Composites
-2 and Nano-
composites
A- Conductive Polyacrylamide Aerogel Polymer
10- Blends,
2190 Composites
-1 and Nano-
composites
A- Synergistic effect of hybrid Halloysite nantube– Calcium Polymer
10- Carbonate as a nanofiller in enhancing the mechanical Blends,
2203 properties of PVC composites Composites
-1 and Nano-
composites
A- Improving fire performance of thermoplastic Polyurethane Polymer
10- with an intumescent Flame Retardant system and Blends,
2271 Nanomolybdenum disulfide Composites
-1 and Nano-
composites
A- Study of MA-POSS nanoparticles dispersion in the Polymer
10- Poly(ethylene glycol) dimethacrylate (PEGDMA) matrix Blends,
2287 Composites
-1 and Nano-
composites
A- Effect of Alumina Nanoparticles on of the Fracture Polymer
10- behaviour of Epoxy Nanocomposites Blends,
2250 Composites
-2 and Nano-
composites
A- Review of Properties, application, dispersion, and Polymer
10- compatibilizing of some mineral particles in the presence Blends,
2082 of branched/ functional polymers Composites
-3 and Nano-
composites
A- The influence of crosslinked acrylonitrile-styrene-acrylate Polymer
10- impact modifier on the mechanical and thermal properties Blends,
2258 of rigid poly(vinyl chloride) Composites
-2 and Nano-
composites
A- The Influence of Silica Localization on the Mechanical Polymer
10- Behavior of Polyamide 6- Reclaimed Rubber Blends Blends,
2300 Composites
-1 and Nano-
composites
A- The synergistic effect of graphene nano-platelets and Polymer
10- antioxidant in improving the thermo-oxidative stability of Blends,
2032 high-density polyethylene Composites
-1 and Nano-
composites
A- Mechanical and electroconductive properties of glass fiber Polymer
10- reinforced polyethylene filled with graphite Blends,
2251 Composites
-1 and Nano-
composites
A- Improvement of thermal properties of polypropylene and Polymer
10- investigation of mechanical properties of Cyclic Blends,
2251 Copolymer/polypropylene blend Composites
-2 and Nano-
composites
A- Mechanical improvement of Glass fiber/PA66 composite Polymer
10- using surfacemodified glass fiber and SEBS-g-MA as an Blends,
2306 Impact modifier Composites
-1 and Nano-
composites
A- Epoxidized Natural Rubber as a Compatibilizer in Polymer
10- Chlorosulfonated PE/Organoclay Nanocomposites Blends,
2312 Composites
-1 and Nano-
composites
A- The Investigation of Solvent Synergy Effect on Polymer
10- Conjugated Polymer Photo-physics Properties: A Case Blends,
2286 Study of MEH-PPV Composites
-4 and Nano-
composites
A- Investigating of nanofiber orientation on the ILSS of Polymer
10- epoxy resin/ glass fiber composite laminates. Blends,
2210 Composites
-1 and Nano-
composites
A- Synthesis of Polyurethane Nanocomposites and Polymer
10- Investigation of Their Mechanical Properties Blends,
2250 Composites
-3 and Nano-
composites
A- Rheology, Morphology and Electrical Conductivity of Polymer
10- Polyethylene (PE)/Ethylene vinyl acetate (EVA) Blends Blends,
2339 Filled with Carbon Black Composites
-1 and Nano-
composites
A- The Effect of Pre-impregnated Tape Width on Printability Polymer
10- and Shear Properties of Continuous Fiber-Reinforced Blends,
2340 Composites Composites
-1 and Nano-
composites
A- Theoretical and Experimental Study on Aluminum Polymer
10- Particulate Composites as Thermal Radiation Barrier Blends,
2343 Composites
-1 and Nano-
composites
A- The relationship between hydrogen bonding, degree of Polymer
10- crystallinity and shape memory behavior of PU/Fe3O4 Blends,
2328 nanocomposites Composites
-1 and Nano-
composites
A- The influence of nano and micro SiO2 particles on the Polymer
10- mechanical behavior of 3D printed samples Blends,
2340 Composites
-2 and Nano-
composites
A- Thermodynamical Evaluation of the Reinforcing Polymer
10- Mechanism in Graphene Oxide/ Acrylonitrile Butadiene Blends,
2341 Rubber Composites Composites
-1 and Nano-
composites
A- Study on photo-physical properties of semi-conducting Polymer
10- polymers with different feeding manners: A Case Study of Blends,
2286 MEH-PPV Composites
-3 and Nano-
composites
A- Low Density Polyethylene based Micro/Nanocomposites: Polymer
10- Feasibility of Calendering Process Blends,
2159 Composites
-1 and Nano-
composites
A- Synergistic Effect of Cellulose Nanofibers lamina and Polymer
10- clay nanoParticles on Mechanical Properties of Epoxy Blends,
2634 Resin Composites
-1 and Nano-
composites
A- Crystallization and Micro-Phase Separation of Polymer
10- Thermoplastic Polyurethane/Polyaniline Blends: Influence Blends,
2371 of Polyaniline Nanorods Content Composites
-1 and Nano-
composites
A- Investigation on permeability of packaging films based on Polymer
10- Polyethylene/Ethylene vinyl alcohol/Nanoclay Blends,
2387 nanocomposite Composites
-1 and Nano-
composites
A- Effect of GO-ZnO nanohybrid on biodegradability and Polymer
10- mechanical properties of Polybutylene succinate Blends,
2374 Composites
-1 and Nano-
composites
A- Epoxy/Amine Dual-Curable System Prepregs: Changes of Polymer
10- Viscosity by Different Cure Systems and Cure Cycles Blends,
2457 Composites
-1 and Nano-
composites
A- Nanoclay/Kenaf/Polyester Hybrid Composites: Polymer
10- Synergistic Effects on Energy Absorbance Blends,
2159 Composites
-2 and Nano-
composites
A- Influence of Speed Print and Raster Angle on the Polymer
10- Mechanical Properties of ABS Polymer Parts Produced by Blends,
2477 Fused Deposition Modelling Composites
-1 and Nano-
composites
A- Effect of Graphite Oxide on the Shape Stabilization of Polymer
10- Polyethylen Glycol Phase Change Materials Systems Blends,
2355 Composites
-1 and Nano-
composites
A- Investigation of Conductivity, Rheological and Polymer
10- Morphological Properties of High Density Polyethelene Blends,
2626 Filled with Carbon Black Composites
-1 and Nano-
composites
A- Investigating the effect of Oscillatory shear strain on the Polymer
10- dielectric properties of PS/TiO2 nanocomposite Blends,
2495 Composites
-2 and Nano-
composites
A- Synthesis and characterization of thermoplastic Polymer
10- polyurethane composite based on epoxy filler Blends,
2236 Composites
-1 and Nano-
composites
A- The effects of reduced graphene oxide on thermal Polymer
10- properties of polylactic acid/ethylene vinyl-acetate Blends,
2100 copolymer blends Composites
-3 and Nano-
composites
A- Effect of Elastomer Type on Spherulitic Structure and Polymer
10- Deformation Behavior of Isotactic Polypropylene Blends,
2386 Composites
-1 and Nano-
composites
A- Morphology, mechanical properties and melt rheology of Polymer
10- PLA/EVA blend reinforced with silicon carbide (SiC) Blends,
2368 nanoparticles Composites
-1 and Nano-
composites
A- Bending behavior of Glass/ Epoxy multilayer sandwich Polymer
10- composites reinforced with weft-knitted spacer fabrics Blends,
2512 Composites
-1
 and Nano-
composites
A- The effect of zinc stearate on the processability of high Polymer
10- density polyethylene (HDPE) Blends,
2527 Composites
-2 and Nano-
composites
A- Preparation of new fillers based on polyurethane and their Polymer
10- application in 3D printing resins Blends,
2252 Composites
-1 and Nano-
composites
A- Investigation of Polyurethane-based Elastomeric Polymer
10- Microcomposites Reinforced with Titanium Dioxide Blends,
2255 (TiO2) Composites
-1 and Nano-
composites
A- An investigation of the effect of fiber surface treatment on Polymer
10- the flexural properties of 3D printed composites Blends,
2340 Composites
-3 and Nano-
composites
A- Melt Processing of Acrylonitrile-butadiene-styrene (ABS) Polymer
10- on Liquid Deposition Modeling (LDM) 3D Printing and Blends,
2255 Injection Molding: Process Feasibility Composites
-3 and Nano-
composites
A- Removal of basic violet-16 cationic dye from aqueous Polymer
10- solution by novel nanocomposite hydrogel containig of Blends,
2172 halloysite nanoclay Composites
-1 and Nano-
composites
A- Synthesis of new hydrogel nanocomposite based on Polymer
10- acrylamide and its application to remove Basic violet 16 Blends,
2172 dye from water Composites
-2 and Nano-
composites
A- Effect of Core Material on the Mechanical Properties of Polymer
10- Hybrid CFRP Sandwich Composites Blends,
2551 Composites
-1 and Nano-
composites
A- The effect of the hybrid presence of two nanoparticles on Polymer
10- improving the toughness of PLA/NR eco-friendly blend Blends,
2515 Composites
-1 and Nano-
composites
A- Flammability reduction of flexible polyurethane foams Polymer
10- using GO and LDH nanoparticles-based multilayer Blends,
2645 coatings Composites
-1 and Nano-
composites
A- Synthesis of graphene Fe3O4 polyaniline Polymer
10- nanocomposite for simultaneous removal of a binary Blends,
2472 mixture of Malachite Green cationic dye and Acid Red 1 Composites
-3 anionic dye from aqueous solutions and Nano-
composites
A- Polyacrylamide hydrogel conductivity enhancement, the Polymer
10- efficiency of MWCNT composition methods Blends,
2596 Composites
-1 and Nano-
composites
A- Effect of nanoparticles concentration on electrical Polymer
10- conductivity of a TPU/MWCNT nanocomposite Blends,
2598 Composites
-1 and Nano-
composites
A- Solid and semi-liquid state foaming of polypropylene Polymer
10- copolymers towards production of expanded Blends,
2578 polypropylene beads with double melting peaks Composites
-1 and Nano-
composites
A- Study on the effect of heat treatment on the tensile Polymer
10- properties of nanofibrous composites Blends,
2658 Composites
-1 and Nano-
composites
A- Compatibilized PE/PP blends for the property Polymer
10- enhancement of PE/PP waste Blends,
2610 Composites
-1 and Nano-
composites
A- Effect of soybean oil on dynamic mechanical properties of Polymer
10- Epoxy/Polyurethane IPNs Blends,
2605 Composites
-1 and Nano-
composites
A- Fabrication of Thin Film Nanocomposite Based on PVB Polymer
10- and SWCNTs as a Transparent Electrode in Photovoltaic Blends,
2556 Applications by Spin Coating Composites
-1 and Nano-
composites
A- Biodegradable PBAT/EVOH/Zinc oxide nano composites Polymer
10- Blends,
2620 Composites
-1 and Nano-
composites
A- Investigating the Toughness and Tensile Strength of Polymer
10- Epoxy Nanocomposites Based-Ionic Modified SiO2 Blends,
2497 Nanoparticles. Composites
-2 and Nano-
composites
A- Correlation between morphology and mechanical Polymer
10- properties in low density polyethylene/ethylene vinyl Blends,
2637 acetate copolymer blends Composites
-2 and Nano-
composites
A- The Influences of the POE-MAH compatibilizer on the Polymer
10- morphology, mechanical, and Rheological behavior of Blends,
2729 N6/PC/GO nanocomposites Composites
-1
 and Nano-
composites
A- EVA noanocomposite Foams Containing MWCNT as Polymer
10- Electromagnetic Wave Absorbent. Blends,
2731 Composites
-1 and Nano-
composites
A- Conductive nanocomposite hybrid and biopolymer in Polymer
10- presence of metal oxide particles for sensor applications Blends,
2721 Composites
-1 and Nano-
composites
A- Optically transparent Eudragit nanofibrous membrane Polymer in
10- with potential use in ocular tissue engineering Biomedical and
2325 Tissue
-1 Engineering
A- Influence of PMMA bone cement composition on its Polymer in
10- mechanical properties Biomedical and
2204 Tissue
-1 Engineering
A- Modification and evaluation of Polylactic Acid (PLA) for Polymer in
10- improved its hemocompatibility and hydrophilicity Biomedical and
2213 Tissue
-1 Engineering
A- Evaluation of chemical functionalization of Polylactic Polymer in
10- Acid as a spacer for surface immobilization of Biomedical and
2213 biomacromolecules Tissue
-2 Engineering
A- Synthesis of nano-Gelatin Containing Curcumin and Polymer in
10- Investigating the Effect of Glutaraldehyde as a Biomedical and
2225 Crosslinker in Drug Delivery Tissue
-1 Engineering
A- Laboratory investigation of the effect of carbon nanotubes Polymer in
10- used in polyacrylamide preformed particle gels on Biomedical and
2229 Conformance control of high water production wells Tissue
-1 Engineering
A- Toxicity assessments of polymeric nanoparticles in Polymer in
10- biomedicine Biomedical and
2233 Tissue
-1 Engineering
A- Hydroxyapetite / Polysaccharides Composite Hydrogels Polymer in
10- as Biocompatible Nano-carriers for Bone infection Biomedical and
2242 Tissue
-1 Engineering
A- Fabrication of a self-healing antibacterial hydrogel using Polymer in
10- β-cyclodextrin dimer/modified alginate/AgNO3 Biomedical and
2268 Tissue
-1 Engineering
A- Polycaprolactone/Pluronic F127 scaffold fabricated by 3D Polymer in
10- printing for bone tissue engineering Biomedical and
2212 Tissue
-1 Engineering
A- Gelatin nanofibers incorporating ZIF-8 nanoparticles as Polymer in
10- wound dressings Biomedical and
2193 Tissue
-1 Engineering
A- Biodegradable polymeric micelles for biomedical Polymer in
10- applications Biomedical and
2233 Tissue
-3 Engineering
A- The study of Poly (erythritol-co-dodecanedioate)/ Polymer in
10- lignocellulose nanofiber for tissue engineering application Biomedical and
2066 Tissue
-6 Engineering
A- Aplying k-means clustring technique on physical and Polymer in
10- mechanical properties of various PMMA/silica bone Biomedical and
2204 cements Tissue
-3 Engineering
A- Rheological and structural behavior of gellan-agar Polymer in
10- comprising poly aniline-graphene nanocomposite as a Biomedical and
2402 candidate for neural conduit Tissue
-1 Engineering
A- Reinforcement of nanofibrous scaffolds based on Polymer in
10- polylactic acid/alginate using platelet-enriched plasma Biomedical and
2223 Tissue
-1 Engineering
A- Synthesize of hydrogel nanocarriers for controlled release Polymer in
10- of anti-cancer drug Biomedical and
2031 Tissue
-1 Engineering
A- Assessing printability map of PLA solution in immersion Polymer in
10- precipitation 3D printing (ip3DP) Biomedical and
2361 Tissue
-1 Engineering
A- Reinforced poly (lactic acid) by modified cellulose Polymer in
10- nanofibers extracted from rice straw applicable for tissue Biomedical and
2363 engineering Tissue
-1 Engineering
A- Investigating the hydrophilic properties of Polymer in
10- polycaprolactone containing Capparis spinosa extract for Biomedical and
2224 use in tissue engineering applications Tissue
-1 Engineering
A- Gelatin/polycaprolactone composites as bioinspirated Polymer in
10- scaffolds for tissue engineering Biomedical and
2396 Tissue
-1 Engineering
A- Preparation and characterization of DOX delivery carrier Polymer in
10- by polymer/silica nanostructure Biomedical and
2353 Tissue
-1 Engineering
A- Electrospun polyurethane (PU) nanofibers for vascular Polymer in
10- graft application Biomedical and
2303 Tissue
-1 Engineering
A- Soft contact lenses with high oxygen permeability and Polymer in
10- high surface wettability Biomedical and
2304 Tissue
-1 Engineering
A- The comparison between degradation of polymeric in-situ Polymer in
10- forming implants in in-vitro and in-vivo conditions Biomedical and
2405 Tissue
-1 Engineering
A- Preparation of Hydrophobic Acrylic Foldable Intraocular Polymer in
10- Lens for Cataract Surgery Biomedical and
2179 Tissue
-1 Engineering
A- Synthesis and characterization of thermosensitive gel Polymer in
10- containing PCL nanoparticles as a promising candidate for Biomedical and
2253 drug delivery Tissue
-3 Engineering
A- Printability study of polyelectrolyte bioinks based on Polymer in
10- chitosan for 3Dbioprinting applications Biomedical and
2342 Tissue
-2 Engineering
A- A study on accelerated drug release from in-situ forming Polymer in
10- implants and the correlation with real-time profiles Biomedical and
2405 Tissue
-2 Engineering
A- Synthesis and characterization of polyurethane Polymer in
10- bioadhesive based on castor oil Biomedical and
2490 Tissue
-1 Engineering
A- PVA hydrogels incorporated with croboxymethyl chitosan Polymer in
10- microcapsules containing tetracycline hydrochloride: Biomedical and
2200 morphology and antibacterial behavior Tissue
-2 Engineering
A- The effect of titanium dioxide nanoparticles on the Polymer in
10- morphology and physical/mechanical properties of Biomedical and
2070 poly(L-lactic acid)/gelatin hybrid nanofibers as potential Tissue
-1 scaffolds in tissue engineering Engineering
A- Preparation and Characterization of Novel Antibacterial Polymer in
10- Waterborne Polyurethane Electrospun Fibers Based on Biomedical and
2133 Tannin for Wound Dressing Application Tissue
-1 Engineering
A- Printability of thiol-ene photoclick initiated bioinks Polymer in
10- Biomedical and
2568 Tissue
-1 Engineering
A- Development of a novel duple acrylic coating with an Polymer in
10- anti-fungal effect for bio applications Biomedical and
2542 Tissue
-1 Engineering
A- Investigating the mechanical properties of hydrogel Polymer in
10- nanocomposite with lignin nanoparticles: A short review Biomedical and
2541 Tissue
-2 Engineering
A- PLA/NMP system containing silica hybrids for bone Polymer in
10- tissue engineering Biomedical and
2067 Tissue
-1 Engineering
A- Multi-Functional Core–Shell Nanofibrous Scaffolds Polymer in
10- for Accelerating Wound Healing Biomedical and
2491 Tissue
-2 Engineering
A- Synthesis and characterization of carboxymethylhexanoyl Polymer in
10- chitosan as a promising biomatherial Biomedical and
2599 Tissue
-1 Engineering
A- Preparation of bone tissue scaffold with improved Polymer in
10- biocompatibility, comprising of PCL and PVDF Biomedical and
2600 nanofibers via electrospinning process Tissue
-1 Engineering
A- 3D printing of alginate/gelatin scaffold reinforced by Polymer in
10- nanofibers with hydroxyapatite coating for bone tissue Biomedical and
2612 engineering Tissue
-1 Engineering
A- Interpenetrating polymer networks of poly(2-hydroxyethyl Polymer in
10- methacrylate) and poly(dimethyl siloxane) films for Biomedical and
2613 biomedical applications Tissue
-1 Engineering
A- Waterborne polyurethane films impregnated with Ag Polymer in
10- GO-PDA nanostructures for photothermal therapy of Biomedical and
2615 infected dermal wounds Tissue
-1 Engineering
A- Efficacy of biocompatible polymers polyethylene glycol Polymer in
10- and chitosan in surface modification of carbon nanotubes Biomedical and
2602 for medical application Tissue
-1 Engineering
A- Investigating the rheological and hydrophilic behavior of Polymer in
10- polyethylene glycol (monomethyl ether)-maleic anhydride Biomedical and
2575 Tissue
-1 Engineering
A- Optimization of polycaprolactone and collagen polymers Polymer in
10- for tissue engineering applications Biomedical and
2518 Tissue
-1 Engineering
A- PU foam with interior walls of PCL nanofibers Polymer in
10- Biomedical and
2400 Tissue
-2 Engineering
A- Facile Technique for GelMA Synthesis Providing Polymer in
10- Increased Methacrylation Degree Biomedical and
2400 Tissue
-3 Engineering
A- The effect of chitosan- biopolymer as coated solid lipid Polymer in
10- nanoparticles in mucoadhesive drug delivery Biomedical and
2607 Tissue
-2 Engineering
A- Preparation of poly(vinyl alcohol)/Sodium alginate Polymer in
10- nanofibers Biomedical and
2625 Tissue
-2 Engineering
A- Preparation and Characterization of Hybrid PCL/Collagen Polymer in
10- Sponge Biomedical and
2640 Tissue
-3 Engineering
A- The effect of carboxymethylcellulose on the cellular Polymer
10- structure of polyethylene foam Synthesis and
2072 Polymerization
-1
A- Effect of the organic additive on the polyvinyl chloride Polymer
10- nanocomposite properties Synthesis and
2073 Polymerization
-1
A- Study on mechanical and thermal properties of polyvinyl Polymer
10- chloride nanocomposites reinforced with the azo- Synthesis and
2073 containing phenol derivative Polymerization
-2
A- Synthesis of Well-known RAFT Agent for Living Polymer
10- Polymerization of 2-Hydroxyethyl Methacrylate (HEMA) Synthesis and
2085 Polymerization
-1
A- Synthesis and application of grafted microcrystalline Polymer
10- cellulose with imidazolium-based ionic liquid for Synthesis and
2081 demulsification of W/O emulsion Polymerization
-1
A- Rheological properties of PE-b-PEG block copolymer in Polymer
10- selective solvent Synthesis and
2100 Polymerization
-1
A- Synthesis of chitosan/polyvinyl alcohol beads for Polymer
10- adsorption of copper from aqueous solution Synthesis and
2262 Polymerization
-1
A- Using Raman and FTIR spectroscopy for demonstrate Polymer
10- fillers in polypropylene compound structure Synthesis and
2426 Polymerization
-1
A- Investigation of acid and base treatment of halloysite on Polymer
10- catalytic performance in Poly-alpha-olefin hydrogenation Synthesis and
2117 reaction Polymerization
-1
A- Effect of various catalyst supports in catalytic activity for Polymer
10- Poly-alpha-olefin hydrogenation Synthesis and
2117 Polymerization
-2
A- Effect of Castor Oil Content on Viscosity of Castor TDI Polymer
10- Prepolymers Synthesis and
2036 Polymerization
-1
A- Effect of alcohol content of support on the catalytic Polymer
10- performance of Ziegler-Natta catalysts in propylene Synthesis and
2118 polymerization Polymerization
-1
A- Random copolymerization of alpha-olefins with Polymer
10- functional monomers by cationic AlCl3/H2O catalytic Synthesis and
2069 system Polymerization
-1
A- Halloysite and ionic liquid composites as catalysts for Polymer
10- oligomerization and hydrogenation of polyalphaolefins Synthesis and
2129 Polymerization
-1
A- Synthesis of polymer-Clay composite with application for Polymer
10- hydrofinishing reactions Synthesis and
2129 Polymerization
-2
A- Novel mesoporous melamine-rich covalent organic Polymer
10- polymer/cupric oxide-based microgel beads as promising Synthesis and
2120 robust heterogeneous nanocatalyst for highly efficient Polymerization
-1 catalytic reduction of emerging water pollutants:…
A- Novel AlCl3 /ionic-liquid initiator system for the Polymer
10- polymerization of isobutylene to conventional grade PIB Synthesis and
2134 Polymerization
-1
A- Preparation and mechanical characterization of the Polymer
10- polyurethane and vitrimers polymers Synthesis and
2672 Polymerization
-1
A- Synthesis of Waterborne Epoxy Based on E6 and Polymer
10- Diethanolamine Synthesis and
2036 Polymerization
-3
A- Investigation the effects of Temperature & Oxygen on the Polymer
10- epoxy resin yellowing during synthesis Synthesis and
2215 Polymerization
-2
A- Investigating the electron-withdrawing effect of aryl Polymer
10- substituents in the catalytic behavior of α-diimine nickel Synthesis and
2101 (II) catalyst on ethylene polymerization Polymerization
-1
A- Investigating the electron-donating effect of aryl Polymer
10- substituents in the catalytic behavior of α-diimine nickel Synthesis and
2101 (II) catalyst on ethylene polymerization Polymerization
-2
A- Evaluation of the Toluene Progen Effect on Porous Polymer
10- Polymer Emulsion Poly (Styrene-Divinylbenzene) Synthesis and
2225 Polymerization
-2
A- Molecular and Morphological Studies to Understand the Polymer
10- Strain Hardening Behavior of UHMWPE/HDPE blends Synthesis and
2040 Polymerization
-1
A- Synthesis and characterization amino-modified magnetic Polymer
10- core-shell triazine-based covalent organic polymer as an Synthesis and
2230 efficent dye adsorbent Polymerization
-1
A- Synthesis of new Ziegler Nata catalyst based on Polymer
10- magnesium ethoxide with controlled morphology in the Synthesis and
2111 presence of different internal donor structures for Polymerization
-1 polypropylene polymerization
A- Flexible cellulose/PEGEMA based solid and gel polymer Polymer
10- electrolytes Synthesis and
2238 Polymerization
-1
A- Cellulose-based polymer electrolytes for electrochemical Polymer
10- devices Synthesis and
2238 Polymerization
-2
A- Synthesis of Low Viscosity Polyalfaolefin Oils Using Polymer
10- Deep Eutectic Solvent/ Aluminium chloride system Synthesis and
2114 Polymerization
-2
A- Synthesis and characterization of chromium-based Polymer
10- heterogeneous catalysts containing tridentate ligands for Synthesis and
2268 the production of 1-hexene Polymerization
-2
A- Effect of molecular weight on the performance of Polymer
10- asymmetric polysulfone membranes Synthesis and
2278 Polymerization
-1
A- Smart block copolymers as fluorescence chemosensors Polymer
10- Synthesis and
2098 Polymerization
-1
A- Synthesis of bisphenol A-free epoxy resin from Polymer
10- pentaerythritol tetrarosin ester Synthesis and
2289 Polymerization
-1
A- Fabrication of phosphazene based covalent triazine Polymer
10- polymer with excellent flame retardancy and smoke Synthesis and
2187 suppression for thermoplastic polyurethane Polymerization
-2
A- Effect of Polymerization Techniques and Reaction Polymer
10- Temperature on Glass Transition Temperature (Tg) of Synthesis and
2095 Poly(methyl methacrylate) (PMMA) Polymerization
-1
A- Synthesis and characterization of florinated waterborne Polymer
10- epoxy dispersion Synthesis and
2404 Polymerization
-1
A- Synthesis of pH sensitive DMAEMA-co-HEMA for drug Polymer
10- delivery application Synthesis and
2068 Polymerization
-1
A- Phase morphology, thermophysical and mechanical Polymer
10- properties of PCL and PDMS based two soft segments Synthesis and
2285 TPU Polymerization
-1
A- Synthesis and characterization of fluorescent polyurethane Polymer
10- Synthesis and
2226 Polymerization
-1
A- Synthesis of Janus Nanoparticles Based on Polymer
10- Methylmathacrylate/Methacrylamide Copolymer by Synthesis and
2322 Emulsion Polymerization: Ivestigation of Size and Polymerization
-1 Morphology
A- Synthesis of PMMA Latex Nanoparticles Containing Polymer
10- Different Functional Groups by Emulsion Polymerization Synthesis and
2317 for Development of Photoswitchable Spiropyran Polymer Polymerization
-1 Nanoparticles
A- Synthesis and characterization of nanocomposites based Polymer
10- on thermoplastic polyurethane/cellulose nanocrystals Synthesis and
2345 Polymerization
-1
A- Fe3O4 Nanoparticles grafted on microcrystalline Polymer
10- cellulose/immidazolium-based ionic liquid: Efficient Synthesis and
2364 nanodemulsifire for separation of water in crude oil Polymerization
-2 emulsion
A- Structure-Properties Comparison of Random and Polymer
10- Block Hydroxyl Terminated Polyether Copolymer (HTPE Synthesis and
2370 and TPEG) Polymerization
-1
A- Preparation and investigation of poly (styrene-co-butyl Polymer
10- acrylate) composite particle size and color properties by Synthesis and
2237 suspension polymerization Polymerization
-2
A- Synthesis and properties of poly(styrene-co-butyl Polymer
10- acrylate)/ clay nanocomposite prepared by latex Synthesis and
2305 componding method Polymerization
-1
A- Comparison of HDPE films from Basel and Mitsui slurry Polymer
10- plants Synthesis and
2080 Polymerization
-3
A- Gel origin in the 7000F type HDPE films Polymer
10- Synthesis and
2080 Polymerization
-4
A- Investigation of APTMS Effect on the Mechanical Polymer
10- Properties of Waterborne Polyurethanes based on Castor Synthesis and
2194 Oil Polymerization
-1
A- Synthesis of amphiphilic diblock copolymer PEG-b- Polymer
10- PMMA by atom transfer radical polymerization and Synthesis and
2403 investigation of its surface properties Polymerization
-1
A- Designing a polyurethane based on PPG and MDI capable Polymer
10- to participate in free radical polymerization Synthesis and
2094 Polymerization
-1
A- Synthesis of polyvinylidene fluoride/polythiophene as gel Polymer
10- polymer electrolytes for lithium-ion batteries Synthesis and
2375 Polymerization
-1
A- Green synthesis of Titanium(IV) oxide with Covalent Polymer
10- organic frameworks hybrid under ultrasonic irradiation Synthesis and
2356 Polymerization
-1
A- Synthesis and identification of porous organic polymer Polymer
10- based on triazine and its application in Volatile iodine Synthesis and
2411 adsorption Polymerization
-1
A- Preparation of spherical micelles from diblock terpolymer Polymer
10- based on poly(acrylic acid) in organic solvent Synthesis and
2308 Polymerization
-1
A- Novel poly(amide-urethane)s for high thermal stability Polymer
10- applications Synthesis and
2079 Polymerization
-3
A- Polypyrrole nanoparticles synthesized in a Continuous Polymer
10- Microfluidic Reactor Synthesis and
2377 Polymerization
-1
A- Ionomer containing methacrylate double bond pendant Polymer
10- groups: synthesis and characterization Synthesis and
2389 Polymerization
-3
A- Poly(acrylic acid-co-itaconic acid) based antiscalant: Polymer
10- synthesis and properties Synthesis and
2389 Polymerization
-4
A- Effect of hydrophobic monomer type on the rheological Polymer
10- properties of the hydrophobically modified Synthesis and
2135 polyacrylamides synthesized via micellar polymerization Polymerization
-2
A- Characterization of conventional grade polyisobutene for Polymer
10- viscosity improver applications Synthesis and
2114 Polymerization
-3
A- Evaluation the influence of polyether/polyester mixed soft Polymer
10- segments on Hydrogen bonding and micro-phase Synthesis and
2465 separation of thermoplastic polyurethanes Polymerization
-1
A- Synthesis of Star-shaped polycaprolactone using Glycerol Polymer
10- as initiator Synthesis and
2466 Polymerization
-1
A- The Effect of Polymerization Temperature of Ultra High Polymer
10- Molecular Weight Polyethylene (UHMWPE) on Synthesis and
2462 Microstructure Polymerization
-1
A- Reflectance and photophysical properties of rhodamine Polymer
10- 6G (Rh 6G)/2-(4-methyl-2-oxo-2H-chromen-7-yloxy) Synthesis and
2479 acetic acid (MOHCYAA) hybrid for application in cold Polymerization
-1 dye
A- Poly (acrylamide-co-(7-(Allyloxy)-2H-chromen-2-one) Polymer
10- and poly (acrylamide-co-N-(Rhodamine-6G) lactam-N- Synthesis and
2479 Allyloxy ethylenediamine)-derived Fe3+ selective Polymerization
-2 fluorescent sensor in aqueous media
A- High-performance comb-like PCE Superplasticizer and Polymer
10- their interactions with cement particles Synthesis and
2508 Polymerization
-2
A- Synthesis and identification of a porous organic polymer Polymer
10- and its application for adsorption of anionic dyes Synthesis and
2485 Polymerization
-1
A- Synthesis of star-shaped polyurethane using Polymer
10- polycaprolactone with three arms and investigation of its Synthesis and
2466 shape memory performance Polymerization
-2
A- Nano Porous Polymer Beads Based on Cross-linked Polymer
10- Poly(styrene -co-butylacrylate) Prepared through Synthesis and
2366 Suspension Polymerization for Extraction of Anthocyanin Polymerization
-2
A- Synthesis and characterization of hydrogel nanocomposite Polymer
10- polyacrylamide /halloysite nanotubes /chitosan for wound Synthesis and
2172 dressing Polymerization
-3
A- Synthesis of sulfonated polyaniline composite on the Polymer
10- surface of pencil graphite electrode and its application in Synthesis and
2055 ammonium detection Polymerization
-2
A- Study on characteristics and properties of chitosan-based Polymer
10- polymer electrolytes Synthesis and
2502 Polymerization
-1
A- κ-Carrageenan/triazin-based covalent organic framework Polymer
10- nanocomposite: preparation, characterization, and Synthesis and
2524 application in BB41 dye removal Polymerization
-1
A- Investigation of electrocatalytic properties of Cu-pPDA Polymer
10- Coordination Polymer in CO2 RR Synthesis and
2492 Polymerization
-5
A- Synthesis, Characterization and Polymerization of HEMA Polymer
10- on Fe3O4 Nanoparticles via SI-ATRP Synthesis and
2504 Polymerization
-1
A- Long-chain branched random poly (butylene adipate-co- Polymer
10- ethylene terephthalate) tetrapolymers: synthesis and Synthesis and
2510 rheological properties Polymerization
-1
A- Synthesis of Graphene Oxide Mill 101(Cr) composite to Polymer
10- investigate the absorption of pollution from industrial Synthesis and
2504 effluents Polymerization
-3
A- Synthesis of Poly(ethylene glycol)-b-Polystyrene Polymer
10- Microbubbles Synthesis and
2403 Polymerization
-3
A- Synthesis of imidazolium based triazol poly(ionic liquids) Polymer
10- by atom transfer radical polymerization (ATRP) in the Synthesis and
2521 presence of green macroinitiator to demulsification of Polymerization
-1 W/O emulsion
A- Synthesis and Characterization of Biodegradable Anti- Polymer
10- Bacterial Polyurethane Coatings in Deep Eutectic Synthesis and
2533 Solvents Polymerization
-1
A- Density and Thermal Conductivity Study of Rigid Polymer
10- Polyurethane Foams using RSM Synthesis and
2419 Polymerization
-2
A- Synthesis of MOF525 Pani composite as absorbent of Polymer
10- organic dies Synthesis and
2567 Polymerization
-1
A- Traceable Smart Hydrogel with High Capacity for Polymer
10- Efficient Drug Administration Synthesis and
2464 Polymerization
-1
A- Synthesis of sulfonated polyaniline composite on the Polymer
10- surface of pencil graphite electrode and its application in Synthesis and
2055 dopamine detection Polymerization
-3
A- Synthesis of Hydroxyl-Terminated Polyether (HTPE) by Polymer
10- Innovative Approach Using The Williamson Method Synthesis and
2597 Polymerization
-1
A- Fabrication of a novel polyol from sunflower oil for Polymer
10- synthesis of antibacterial polyurethane coating Synthesis and
2604 Polymerization
-1
A- graft copolymerization of Lignin-Polycaprolactone(PCL) Polymer
10- and evaluation of its structural characteristics Synthesis and
2611 Polymerization
-1
A- Synthesis of sulfonated polyaniline-nylon6 nanoblend Polymer
10- Synthesis and
2543 Polymerization
-1
A- Simulation of bulk photopolymerization of furfuryl acr Polymer
10- ylate Synthesis and
2348 Polymerization
-2
A- Synthesis and charectrization unsaturated random Polymer
10- copolyether-ester and investigation their curing Synthesis and
2619 mechanism using rheology Polymerization
-1
A- Effect of the percentage of sulfonation monomer in Polymer
10- hydrophilicity of sulfonated poly (arylene ether sulfone) Synthesis and
2278 water treatment membranes Polymerization
-3
A- Synthesis and characterization of Modified Polymer
10- polyisobutylene-based oil-soluble dispersants from Synthesis and
2647 Polyisobutylene Succinimides Polymerization
-1
A- Synthesis of poly (propylene imine) dendrimer with Polymer
10- ethylenediamine core and investigation of dendrimer's Synthesis and
2660 response to glucose at different pH Polymerization
-1
A- Investigating the Progress of Polymerization of Polymer
10- Bismaleimide Using Mark-Houwink-Sakurada Equation Synthesis and
2725 Polymerization
-1
A- Synthesis and characterization of a novel conductive Polymer
10- copolymer based on imidazole derivative compound and Synthesis and
2728 aniline Polymerization
-1
A- Temperature responsive PS-b-PNIPAM grafted substrates Polymer
10- developed by surface-initiated ATRP technique Synthesis and
2613 Polymerization
-2
A- Synthesis and characterization of conductive polymers Polymer
10- based on carbazole structure and investigation of their Synthesis and
2722 physical, electrochemical and sensor properties Polymerization
-1
A- Advances of SARS-CoV-2 Vaccine Delivery Using Polymeric
10- Supramolecular Structuring of Mesoporous Silica Materials for
2307 Nanoparticles Modified with β-Cyclodextrins Medical Care
-2
 in the COVID-
19 Pandemic
A- Rheological behaviors as criteria for the size of blow Rheology and
10- molded polyethylene articles Polymer
2139 Processing
-1
A- Diluent elimination may impact the crystalline structure of Rheology and
10- the polymer in a polymer-diluent system Polymer
2191 Processing
-1
A- Crystallization Temperature of Diluted Polymers: Rheology and
10- Dependency on Cooling Rate and Composition Polymer
2191 Processing
-2
A- An Investigation on Mechanical and Rheological Rheology and
10- Properties of Recycled PET (r-PET) by using Toluene Polymer
2237 diisocyanate (TDI) as a chain extender Processing
-1
A- Rheological Properties and Miscibility Studies of Blown Rheology and
10- Films Made From Recycled LDPE/LLDPE Films Polymer
2267 Processing
-1
A- Rheologiacal Properties Investigation of Flopaam 360S Rheology and
10- Solution Regard to Temperature and Salinity Polymer
2221 Processing
-1
A- Stydy Effect of POSS Side Pendant Group Length Rheology and
10- on Rheological Properties of LDPE and PS Polymer
2316 Nanocomposites Processing
-2
A- Effect of Alkyl Chain Length in Phthalate Plasticizer via Rheology and
10- Rheological Investigation of PVC Plastisol Gelation and Polymer
2316 Fusion Processing
-3
A- Preparation of the Modified Polyethylenes Using Reactive Rheology and
10- Extrusion for Using in Packaging Industries and Polymer
2116 Investigation of their Physical and Mechanical Properties Processing
-1
A- Molecular weight and dispersity competition to govern the Rheology and
10- crystalline features of poly(3-hexylthiophene) Polymer
2191 Processing
-3
A- Evaluation the rheological behavior of high filled CU- Rheology and
10- ABS 3d printing filament Polymer
2108 Processing
-2
A- Rheological study of modified starch with multifunctional Rheology and
10- citric acid Polymer
2536 Processing
-1
A- Van Gurp-Palmen plots for blends of linear and branched Rheology and
10- polyethylenes at various temperatures Polymer
2423 Processing
-2
A- Investigation the effect of different parameters on the size Rheology and
10- of polydimethylsiloxane particles using the microfluidic Polymer
2415 method Processing
-1
A- The Transient Shear Flow of Viscoelastic Fluids in Rheology and
10- Concentric Annuli Polymer
2501 Processing
-3
A- Investigation of rheological behaviors of PP and PP-PE Rheology and
10- copolymer Polymer
2500 Processing
-1
A- A study on rheological behavior of PP/PE copolymers Rheology and
10- based on generalized maxwell model Polymer
2500 Processing
-2
A- Chemical degradation of pipe grade polyethylene in the Rheology and
10- chlorinated water-Effect of comonomer type and Polymer
2561 distribution Processing
-1
A- Investigation of xylene permeability as pesticides and Rheology and
10- herbicides solvent in cylindrical plastic bottles Polymer
2550 Processing
-1
A- Investigation of Rheological Behavior of poly (lactic acid) Rheology and
10- (PLA) /HCNT Nanocomposites Polymer
2474 Processing
-1
A- Effect of temperature on diffusion coefficient and Simulation and
10- nematic-isotropic phase transition in liquid crystallineModeling of
2052 elastomers using molecular dynamics simulation Polymeric
-2 System
A- Modeling of Critical Properties in Bionanocomposite Simulation and
10- Hydrogels Prepared by Freeze-Thaw Method Modeling of
2217 Polymeric
-1 System
A- Application of Genetic Algorithm to Model and Interpret Simulation and
10- Mechanical Properties in Thermoplastic Starch-Based Modeling of
2217 Biocomposites Reinforced by Rice Straw Polymeric
-2 System
A- Simulations of the X-ray shielding materials using the Simulation and
10- MCNP metod Modeling of
2082 Polymeric
-2 System

==================================================
===
*************************************************
Venue
Seminar Venue
...
 Seminar will be held at the Chemical Engineering Department
(Polymer Group), Isfahan University of Technology on 8-10
November, 2022.

Address: Isfahan University of Technology, Isfahan, Iran

Polymer Group, Chemical Engineering Department, Isfahan University

of Technology

==================================================
===
About Iran

Iran
 Iran, also known as Persia officially the Islamic Republic of Iran since
1980, is a country in Western Asia. It is bordered on the north by
Armenia, Azerbaijan and Turkmenistan, with Kazakhstan and Russia
across the Caspian Sea; on the east by Afghanistan and Pakistan; on
the south by the Persian Gulf and the Gulf of Oman; on the west by
Iraq; and on the northwest by Turkey. Comprising a land area of
1,648,195 km2 (636,372 sq mi), it is the second-largest nation in the
Middle East and the 18th-largest in the world; with over 77 million
inhabitants, Iran is the world's 17th most populous nation. It is the only
country that has both a Caspian Sea and Indian Ocean coastline. Iran
has been of geostrategic importance because of its central location in
Eurasia and Western Asia and the Strait of Hormuz.

Iran is home to one of the world's oldest civilizations, beginning with

the formation of the Proto-Elamite and Elamite kingdom in 3200 –
2800 BCE. The Iranian Medes unified the country into the first of many
empires in 625 BCE, after which it became the dominant cultural and
political power in the region. Iran reached the pinnacle of its power
during the Achaemenid Empire (First Persian Empire) founded by Cyrus
the Great in 550 BCE, which at its greatest extent comprised major
portions of the ancient world, stretching from Thrace and Macedon on
the northeastern border of Greece in the west, to the Indus Valley in the
east, making it the largest empire the world had yet seen. The empire
collapsed in 330 BCE following the conquests of Alexander the Great.
The area eventually regained influence under the Parthian Empire and
rose to prominence once more after the establishment of the Sasanian
dynasty (Neo-Persian empire) in 224 CE, under which Iran again
became one of the leading powers in the world along with the Byzantine
Empire for the next four centuries.

Manichaeism and Zoroastrianism were largely replaced after Rashidun

Muslims invaded Persia in 633 CE, and conquered it by 651 CE. Iran
thereafter played a vital role in the subsequent Islamic Golden Age,
producing numerous influential scientists, scholars, artists, and thinkers.
The emergence in 1501 of the Safavid dynasty, which promoted the
Twelver school of thought as the official religion, marked one of the
most important turning points in Iranian and Muslim history. It also
culminated into tensions, which in 1514 led to the Battle of Chaldiran.
Starting in 1736 under Nader Shah, Iran would for the last time rise to
high prominence, reaching it's greatest territorial extent since the
Sassanid Empire, and briefly possessing over what was probably the
most powerful empire in the world. The Persian Constitutional
Revolution of 1906 established the nation's first parliament, which
operated within a constitutional monarchy. Following a coup d'état
instigated by the UK and the US in 1953, Iran gradually became
autocratic. Growing dissent against foreign influence and political
repression culminated in the Iranian Revolution, which led to the
establishment of an Islamic republic on 1 April 1979.

Tehran is the capital and largest city, serving as the cultural, commercial,
and industrial center of the nation. Iran is a major regional and middle
power, exerting considerable influence in international energy security
and the world economy through its large reserves of fossil fuels, which
include the largest natural gas supply in the world and the fourth-largest
proven petroleum reserves. It hosts Asia's fourth-largest number of
UNESCO World Heritage Sites. Globally, it ranks 8th in the world for
the amount of books published per year, and was ranked first in scientific
progress in the world in 2011.

Iran is a founding member of the UN, NAM, OIC and OPEC. Its unique
political system, based on the 1979 constitution, combines elements of
a parliamentary democracy with a religious theocracy run by the
country's clergy, wherein the Supreme Leader wields significant
influence. A multicultural nation comprising numerous ethnic and
linguistic groups, most inhabitants are Shi'ites, the Iranian rial is its
currency, and Persian is the official language.

Provinces and cities

Tehran, with a population of 7,705,036, is the largest city in Iran and is

the capital. Tehran, like many big cities, suffers from severe air
pollution. It is the hub of the country's communication and transport
network.

Mount Damavand, Iran's highest point, is located in Amol County,

Mazanderan.
Mashhad, with a population of 2,410,800, is the second largest Iranian
city and the centre of the Razavi Khorasan Province. Mashhad is one of
the holiest Shia cities in the world as it is the site of the Imam Reza
shrine. It is the centre of tourism in Iran, and between 15 and 20 million
pilgrims go to the Imam Reza's shrine every year.

Another major Iranian city is Isfahan (population 1,583,609), which is

the capital of Isfahan Province. The Naqsh-e Jahan Square in Isfahan
has been designated by UNESCO as a World Heritage Site. The city
contains a wide variety of Islamic architectural sites ranging from the
11th to the 19th century. The growth of the suburban area around the
city has turned Isfahan into Iran's second most populous metropolitan
area (3,430,353).

The fourth major city of Iran is Tabriz (population 1,378,935), the

capital of the East Azerbaijan Province. It is also the second industrial
city of Iran after Tehran. Tabriz had been the second largest city in Iran
until the late 1960s and one of its former capitals and residence of the
crown prince under the Qajar dynasty. The city has proven extremely
influential in the country’s recent history.

The fifth major city is Karaj (population 1,377,450), located in Alborz

Province and situated 20 km west of Tehran, at the foot of the Alborz
mountains; however, the city is increasingly becoming an extension of
metropolitan Tehran.

The sixth major Iranian city is Shiraz (population 1,214,808); it is the

capital of Fars Province. The Elamite civilization to the west greatly
influenced the area, which soon came to be known as Persis. The ancient
Persians were present in the region from about the 9th century BCE, and
became rulers of a large empire under the Achaemenid dynasty in the
6th century BCE. The ruins of Persepolis and Pasargadae, two of the
four capitals of the Achaemenid Empire, are located in or near Shiraz.
Persepolis was the ceremonial capital of the Achaemenid Empire and is
situated 70 kilometres (43 mi) northeast of modern Shiraz. UNESCO
declared the citadel of Persepolis a World Heritage Site in 1979.

Languages

The majority of the population speaks the Persian language, which is

also the official language of the country, as well as other Iranian
languages or dialects.

Arts and literature

Ruins of the Achaemenid palace of Persepolis, now a UNESCO World

Heritage Site.

Tiles of Sheikh Lotf Allah Mosque

Iran is home to one of the richest artistic traditions in world history and
encompasses many disciplines, including architecture, painting,
weaving, pottery, calligraphy, metalworking and stonemasonry. Carpet-
weaving is one of the most distinguished manifestations of Persian
culture and art, and dates back to ancient Persia. Persians were among
the first to use mathematics, geometry, and astronomy in architecture
and also have extraordinary skills in making massive domes which can
be seen frequently in the structure of bazaars and mosques. This greatly
inspired the architecture of Iran's neighbors as well. The main building
types of classical Iranian architecture are the mosque and the palace.
Besides being home to a large number of art houses and galleries, Iran
also holds one of the largest and most valuable jewel collections in the
world.

Iran ranks seventh among countries in the world with the most
archeological architectural ruins and attractions from antiquity as
recognized by UNESCO. Fifteen of UNESCO's World Heritage Sites
are creations of Iranian architecture.

Poetry is used in many Persian classical works, whether from literature,

science, or metaphysics. Persian literature has been considered by such
thinkers as Goethe as one of the four main bodies of world literature.
The Persian language has produced a number of famous poets; however,
only a few poets as Rumi and Omar Khayyám have surfaced among
western popular readership, even though the likes of Hafiz, Saadi,
Nizami, Attar, Sanai, Nasir Khusraw and Jami are considered by many
Iranians to be just as influential.
==================================================
===

Isfahan City Tour

All About Isfahan

Isfahan History
Isfahan is one of the world’s most
beautiful cities, an unforgettable
international tourism destination
popular all of over the world, an
encyclopedia of Iranian and Islamic
civilization, locally famous as half of
the world. Isfahan presents the real
Persian character, the most glorious in
historical and architectural wealth.
Monuments in Isfahan are great
examples of our art and architecture.
The City of Isfahan briefly
Esfahan Nesf-e-Jahan, ‘Isfahan is half
the world’
This well-known saying was
originally coined to describe Isfahan
in Safavid times, when the city was at
the height of its glory Even today,
Isfahan remains one of Iran's most
beautiful cities and its monuments can
be ranked among the most splendid of
the Islamic world The atmosphere in
town is a relaxed one: this is a place to
wander in, to get to know slowly, with
its gardens, its river side, and its
shopping streets.
THE SAFAVID ROYAL CITY
The central of Isfahan city during the
Seljuq period was the Friday Mosque
and the Meidan-e Kuhneh, to the
north of the present Royal Square. In
1598, Shah Abbas decided to shift this
center-according to some, in order to
annoy a rich merchant who was
reluctant to part with his property-and
turned to the Naqsh-e Jahan ...
Travelers to Esfahan
Fortunately for a researcher, Esfahan
has always remained a halting point
for any traveler. A Succession of
voyagers, drawn to the country either
by commercial interests or by a taste
for exploration, has left valuable ac-
counts of Esfahan's glorious past.
The first comprehensive picture of the
city is given by Naser Khosrow
(1004-1088), the celebrated Persian
poet, philosopher, and Ismailite
propagandist. After his visit to
Esfahan in 1052, he wrote in Snfar-
Nal11eh ("Travelogue")
Travel to Iran without Isfahan is not
complete
According to tourists who visited Iran
and Isfahan, it is one of the most
beautiful and most visited cities in
Iran. It seems that there’s something
in Isfahan that makes the city so
likable.As it’s got some of the
highlights of a trip to Iran, the
absolute majority of tour operators
plan the itineraries in a way that
Esfehan is the first or the last stop
before leaving Iran.
Isfahan the Persian Florence
Isfahan is a city that different parts of
Iranian identity represented by it.
An identity that owes its reputation to
Iranian cultural and artistic traditions
especially the city of Isfahan.Isfahan
among the cities of Iran is like a piece
of jewelry that has kept its Glory,
Shines, and greatness despite its
historical fluctuations for centuries.
JOLFA quarter ON THE SOUTH
BANK
Jolfa,the Armenian and Christian
quarter of Isfahan, was established in
1603 on the south bank of the
Zayandeh and was linked to the
Muslim town by Si-o-Se pol, As all
the caravans that arrived from Shiraz
and the south of the country passed
through jolfa on their way to the
Royal Square, it rapidly became a
flourishing trading quarter. Shah
Abbas had been counting on this
prosperity when, despite strong
opposition on their part, he imported
entire Armenian families from the
town of Jolfa on the Araxes River in
Azerbaijan.
Climate of Isfahan
The city is located in the lush plain of
the Zayandeh River, at the foothills of
the Zagros mountain range. No
geological obstacles exist within 90
kilometers (56 miles) north of Isfahan,
allowing cool northern winds to blow
from this direction. Situated at 1,590
meters (5,217 ft) above sea level on
the eastern side of the Zagros
Mountains, Isfahan has an arid
climate.
Get In / Around Isfahan
Isfahan is served by the Isfahan
International Airport.
Isfahan Metro is under construction
and will include 2 lines with 43 km
(27 mi) length.
Isfahan is connected to three major
rail lines.
Isfahan's internal highway network is
currently under heavy expansion
which began during the last decade
Excursions around Isfahan

On Azdegan Avenue, which forms

part of the ring road around the south
of the city (just before Basij-e
Mostazafin Square, is the tomb of
Baba Rokn od-Din. This mausoleum,
with its rather original ten-sided
conical roof and drum, was built in
1629 by Shah Abbas to commemorate
a theologian who died in the l4th
century Unfortunately a large part of
the tilework, both inside and outside,
has now disappeared.
Handicrafts in Isfahan
Isfahan as on of the old historical
cities of Iran is the center of different
kind of arts as follow:
Carpet weaving, Enamel Work
(Mina), Inlaid Work (Khatam),
Painted Matters (Ghalamkar)
Tile & Tile Mosaic Work,
Calligraphy, Miniature Paintings,
Metal Work, Embroidery,
Brocade, Papier Mache.
Cuisine Isfahan

One thing for sure, Iran and to be a

little more specific, Esfahan, has some
of the world`s most delicious foods.

You should test and eat the famous

eating of Isfahan like Biryani,
Fesenjan, Gaz, and Pulaki

Isfahan Industry

The distribution of economic activities

within Isfahan, with an urbanism of
76 percent, is highly uneven. The
oasis of Isfahan, watered by the
Zāyandarud, is responsible for nearly
half of rural activities, while the other
half is spread out across the province.

Education and Cultural Affairs

Two famous university in Isfahan:

Isfahan university was founded partly
in the former Hezar Jarib Garden in
1956A.D.
Isfahan University of Technology
‫‪branched out in 1977 A.D.About ten‬‬
‫‪years later.‬‬

‫‪‬‬ ‫==============================================‬

‫‪‬‬ ‫‪Accomodation‬‬

‫‪Hasht Behesht Hotel‬‬

‫‪Provider: Isfahan University of Technology Hotel‬‬

‫‪Description:‬‬

‫هتل هشت بهشت دانشگاه صنعتی اصفهان (چهار ستاره) که در بهمن ماه سال ‪ 7611‬به بهره‬
‫برداری رسید‪ ،‬با محیطی آرام و بی نظیر‪ ،‬چشم انداز زیبا و امکانات رفاهی عالی ‪،‬آماده‬
‫پذیرش میهمانان در طول سال می باشد‪.‬‬
1. Hasht Behesht Hotel in Isfahan University of Technology
( To more information please click here) 

 Reservations
==================================================
====
Student Dormitory
*************************************************
Contact
Contact Information
==================================================
===
Tel: +98 31 33915608
Fax: +98 31 33912677
+98 9938868837

==================================================
===

Papers of Previous Seminar

 The Book of ISPST 2020


 The Book of ISPST 2018

The Book of ISPST 2016

==================================================
===