BMW-Motorrad - R 1200 RT (0A13) (USA)

63 12 090 Removing/installing complete headlight

+ 63 12 636
Equipment trim-level variant:

0270 - US audio systemOE

Additional billing items

65 12 507 Additional work with audio system

Preparatory work
Removing windscreen
Removing left side panel
Removing left speaker cover

– with US audio systemOE (0270)

Removing left speaker

Removing left front-fairing panel
Removing left mirror
Removing top trim panel, left
Removing right side panel
Removing right speaker cover

– with US audio systemOE (0270)

Removing right speaker

Removing right front-fairing panel
Removing right mirror
Removing top section of fairing, right
Removing cover for windscreen adjuster
Disengaging windscreen adjuster
Removing centre top section of fairing

Core activity
(-) Removing headlight

Remove cable tie (arrow).

Disconnect plug (1) for the headlight.
Remove lock washers (2).

082018 BMW Motorrad, UX-VA-4 1/3

BMW-Motorrad - R 1200 RT (0A13) (USA)
Remove lock washers (1).

Remove screws (1).

Remove headlight (2).

(-) Installing headlight

Hold headlight (1) in position and push it into grommets (2).

Install screws (3).

Install lock washers (1).

082018 2/3
BMW-Motorrad - R 1200 RT (0A13) (USA)
Install lock washers (2).
Connect plug (1) for the headlight.
Install the cable tie (arrow).

Follow-up work
Installing centre top section of fairing
Securing the windshield adjuster
Installing cover for windscreen adjuster
Installing top section of fairing, right
Installing right mirror
Installing right front-fairing panel

– with US audio systemOE (0270)

Installing right speaker

Installing right speaker cover
Installing right side panel
Install the top section of fairing, left
Installing left mirror
Installing left front-fairing panel

– with US audio systemOE (0270)

Install the left speaker

Installing left speaker cover
Checking headlight beam throw
Installing left side panel
Install the windscreen
Final check of work performed

082018 BMW Motorrad, UX-VA-4 3/3

BMW-Motorrad - R 1200 RT (0A13) (USA)

Removing windscreen

Remove screws (1).

Remove trims (2).
Remove screws (3).
Remove windscreen (4).
Remove windscreen reinforcement (5).

Return to Main Page

082018 BMW Motorrad, UX-VA-4 1/1

BMW-Motorrad - R 1200 RT (0A13) (USA)

Removing left side panel

Remove screws (1).

ATTENTION
Fairing separated too far from vehicle
Damage to paint and trim panel components
Disengage trim panels from the vehicle only to the extent necessary.

Carefully lift front side trim panel (1) while noting the hooks (Arrows).
Lugs (2) are pulled out of grommets (3).
Remove side trim panel (1) to the top out of side section (4).

Return to Main Page

082018 BMW Motorrad, UX-VA-4 1/1

BMW-Motorrad - R 1200 RT (0A13) (USA)

Removing left speaker cover

Remove screws (1).

Work speaker cover (2) out to remove, noting the tabs (arrows).

Return to Main Page

082018 BMW Motorrad, UX-VA-4 1/1

BMW-Motorrad - R 1200 RT (0A13) (USA)

Removing left speaker

Remove screws (1).

Remove speaker (2).
Disconnect plug (3) for the speaker.

Return to Main Page

082018 BMW Motorrad, UX-VA-4 1/1

BMW-Motorrad - R 1200 RT (0A13) (USA)

Removing left front-fairing panel

Remove screws (1).

Remove body-bound rivet (2).

Unclip front-fairing panel (1) from the lug (arrow) at the back.
Ease front-fairing panel (1) with lug (2) out of grommet (3) and remove.

Return to Main Page

082018 BMW Motorrad, UX-VA-4 1/1

BMW-Motorrad - R 1200 RT (0A13) (USA)

Removing left mirror

Remove screws (1).

Remove mirror (2).

Return to Main Page

082018 BMW Motorrad, UX-VA-4 1/1

BMW-Motorrad - R 1200 RT (0A13) (USA)

Removing top trim panel, left

Remove screws (1) and (2).

Remove top section of fairing (3).
Disconnect plug (4) for the flashing turn indicators.

Return to Main Page

082018 BMW Motorrad, UX-VA-4 1/1

BMW-Motorrad - R 1200 RT (0A13) (USA)

Removing right side panel

Remove screws (1).

ATTENTION
Fairing separated too far from vehicle
Damage to paint and trim panel components
Disengage trim panels from the vehicle only to the extent necessary.

Carefully lift front side trim panel (1) while noting the hooks (Arrows).
Lugs (2) are pulled out of grommets (3).
Remove side trim panel (1) to the top out of side section (4).

Return to Main Page

082018 BMW Motorrad, UX-VA-4 1/1

BMW-Motorrad - R 1200 RT (0A13) (USA)

Removing right speaker cover

Remove screws (1).

Work speaker cover (2) out to remove, noting the tabs (arrows).

Return to Main Page

082018 BMW Motorrad, UX-VA-4 1/1

BMW-Motorrad - R 1200 RT (0A13) (USA)

Removing right speaker

Remove screws (1).

Remove speaker (2).
Disconnect plug (3) for the speaker.

Return to Main Page

082018 BMW Motorrad, UX-VA-4 1/1

BMW-Motorrad - R 1200 RT (0A13) (USA)

Removing right front-fairing panel

Remove screws (1).

Remove body-bound rivet (2).

Unclip front-fairing panel (1) from the lug (arrow) at the back.
Ease front-fairing panel (1) with lug (2) out of grommet (3) and remove.

Return to Main Page

082018 BMW Motorrad, UX-VA-4 1/1

BMW-Motorrad - R 1200 RT (0A13) (USA)

Removing right mirror

Remove screws (1).

Remove mirror (2).

Return to Main Page

082018 BMW Motorrad, UX-VA-4 1/1

BMW-Motorrad - R 1200 RT (0A13) (USA)

Removing top section of fairing, right

Remove screws (1) and (2).

Remove top section of fairing (3).
Disconnect plug (4) for the flashing turn indicators.

Return to Main Page

082018 BMW Motorrad, UX-VA-4 1/1

BMW-Motorrad - R 1200 RT (0A13) (USA)

Removing cover for windscreen adjuster

Remove screws (1).

Remove body-bound rivet (2).
Remove cover (3), pulling lugs (4) out of grommets (5).

Return to Main Page

082018 BMW Motorrad, UX-VA-4 1/1

BMW-Motorrad - R 1200 RT (0A13) (USA)

Disengaging windscreen adjuster

Switch on the ignition.

Raise windscreen adjuster (1) until bolts (2) are accessible.
Remove lock washers (3).
Remove bolts (2) to the outside.
Windscreen adjuster (1) is spring-loaded and snaps up.
Switch off the ignition.
Windscreen adjuster (1) moves down.

Return to Main Page

082018 BMW Motorrad, UX-VA-4 1/1

BMW-Motorrad - R 1200 RT (0A13) (USA)

Removing centre top section of fairing

Remove screws (1).

Pull fairing top section (2) to the front and remove.

Return to Main Page

082018 BMW Motorrad, UX-VA-4 1/1