How To Flash Android Using Smart Phone Flash Tool (SP Flash Tool)
How To Flash Android Using Smart Phone Flash Tool (SP Flash Tool)
Do you want to change the stock ROM of Android Device or your stock ROM has got
corrupted ? Then in this tutorial we’ll guide you to the process of using the SP Flash Tool
(Smart Phone Flash Tool) to install the custom ROM on your Android device.
: Your Android must have atleast 40-50% of battery and USB Drivers
Download the l on your system and extract the downloaded zip �le on
your system. After that you can see the following �les listed.
Once the SP Flash tool is started, click on the button located in the
right side.
Now locate the scatter �le in your stock ROM. It is generally located in the
directory.
After completed all the above steps, connect yourAndroid to your system using the
USB cable and , press any button other than power button so that your system will detect
your Android device. You can use volume buttons.
Once the �ashing process is completed, a green ring will appear on your system.
Now disconnect your Android device and switch it ON.
Congratulations, Now you have successfully �ashed the stock �rmware on your Android
Keep in mind
The above tutorial only works with the Stock �rmware or Custom Rom which comes with
the Scatter �le in it (basically mediatek devices).
: Take a backup of your important data before using the Smart Phone
Flash Tool as because during the �ashing process your personal data will be removed
permanently.