Plot (graphics)

A plot is a graphical technique for representing a

data set, usually as a graph showing the relationship
between two or more variables. The plot can be
drawn by hand or by a computer. In the past,
sometimes mechanical or electronic plotters were
used. Graphs are a visual representation of the
relationship between variables, which are very
useful for humans who can then quickly derive an
understanding which may not have come from lists
of values. Given a scale or ruler, graphs can also be
used to read off the value of an unknown variable
plotted as a function of a known one, but this can
also be done with data presented in tabular form.
Graphs of functions are used in mathematics,
sciences, engineering, technology, finance, and
other areas.

Overview Scatterplot of the eruption interval for Old Faithful (a

geyser)

Plots play an important role in statistics and data

analysis. The procedures here can broadly be split
into two parts: quantitative and graphical. Quantitative techniques are a set of statistical procedures that
yield numeric or tabular output. Examples of quantitative techniques include:[1]

hypothesis testing
analysis of variance
point estimates and confidence intervals
least squares regression

These and similar techniques are all valuable and are mainstream in terms of classical analysis. There are
also many statistical tools generally referred to as graphical techniques. These include:[1]

scatter plots
spectrum plots
histograms
probability plots
residual plots
box plots, and
block plots

Graphical procedures such as plots are a short path to gaining insight into a data set in terms of testing
assumptions, model selection, model validation, estimator selection, relationship identification, factor effect
determination, outlier detection. Statistical graphics give insight into aspects of the underlying structure of
the data.[1]
Graphs can also be used to solve some mathematical equations, typically by finding where two plots
intersect.

Types of plots
Biplot : These are a type of graph used in statistics. A biplot allows information on both
samples and variables of a data matrix to be displayed graphically. Samples are displayed
as points while variables are displayed either as vectors, linear axes or nonlinear
trajectories. In the case of categorical variables, category level points may be used to
represent the levels of a categorical variable. A generalised biplot displays information on
both continuous and categorical variables.
Bland–Altman plot : In analytical chemistry and biostatistics this plot is a method of data
plotting used in analysing the agreement between two different assays. It is identical to a
Tukey mean-difference plot, which is what it is still known as in other fields, but was
popularised in medical statistics by Bland and Altman.[2][3]
Bode plots are used in control theory.
Box plot : In descriptive statistics, a boxplot, also known as a box-and-whisker diagram or
plot, is a convenient way of graphically depicting groups of numerical data through their five-
number summaries (the smallest observation, lower quartile (Q1), median (Q2), upper
quartile (Q3), and largest observation). A boxplot may also indicate which observations, if
any, might be considered outliers.
Carpet plot : A two-dimensional plot that illustrates the interaction between two and three
independent variables and one to three dependent variables.
Comet plot : A two- or three-dimensional animated plot in which the data points are traced on
the screen.
Contour plot : A two-dimensional plot which shows the one-dimensional curves, called
contour lines on which the plotted quantity q is a constant. Optionally, the plotted values can
be color-coded.
Dalitz plot : This a scatterplot often used in particle physics to represent the relative
frequency of various (kinematically distinct) manners in which the products of certain
(otherwise similar) three-body decays may move apart
Biplot Bland–Altman plot Box plot Carpet plot

Phase path of Animated marker Contour plot Logarithmic plot

Duffing oscillator over a 2D plot[4]
plotted as a comet
plot[4]

Parallel Category
Plot

Funnel plot : This is a useful graph designed to check the existence of publication bias in
meta-analyses. Funnel plots, introduced by Light and Pillemer in 1994[5] and discussed in
detail by Egger and colleagues,[6] are useful adjuncts to meta-analyses. A funnel plot is a
scatterplot of treatment effect against a measure of study size. It is used primarily as a visual
aid to detecting bias or systematic heterogeneity.
Dot plot (statistics) : A dot chart or dot plot is a statistical chart consisting of group of data
points plotted on a simple scale. Dot plots are used for continuous, quantitative, univariate
data. Data points may be labelled if there are few of them. Dot plots are one of the simplest
plots available, and are suitable for small to moderate sized data sets. They are useful for
highlighting clusters and gaps, as well as outliers.
Forest plot : is a graphical display that shows the strength of the evidence in quantitative
scientific studies. It was developed for use in medical research as a means of graphically
representing a meta-analysis of the results of randomized controlled trials. In the last twenty
 years, similar meta-analytical techniques have been applied in observational studies (e.g.
environmental epidemiology) and forest plots are often used in presenting the results of such
studies also.

Funnel plot Dot plot (statistics) Forest plot

Galbraith plot : In statistics, a Galbraith plot (also known as Galbraith's radial plot or just
radial plot), is one way of displaying several estimates of the same quantity that have
different standard errors.[7] It can be used to examine heterogeneity in a meta-analysis, as
an alternative or supplement to a forest plot.
Heat map
Lollipop plot
Nichols plot : This is a graph used in signal processing in which the logarithm of the
magnitude is plotted against the phase of a frequency response on orthogonal axes.
Normal probability plot : The normal probability plot is a graphical technique for assessing
whether or not a data set is approximately normally distributed. The data are plotted against
a theoretical normal distribution in such a way that the points should form an approximate
straight line. Departures from this straight line indicate departures from normality. The normal
probability plot is a special case of the probability plot.
Nyquist plot : Plot is used in automatic control and signal processing for assessing the
stability of a system with feedback. It is represented by a graph in polar coordinates in which
the gain and phase of a frequency response are plotted. The plot of these phasor quantities
shows the phase as the angle and the magnitude as the distance from the origin.

Nichols plot Normal probability Nyquist plot

plot

Partial regression plot : In applied statistics, a partial regression plot attempts to show the
effect of adding another variable to the model (given that one or more independent variables
are already in the model). Partial regression plots are also referred to as added variable
plots, adjusted variable plots, and individual coefficient plots.
Partial residual plot : In applied statistics, a partial residual plot is a graphical technique that
attempts to show the relationship between a given independent variable and the response
 variable given that other independent variables are also in the model.
Probability plot : The probability plot is a graphical technique for assessing whether or not a
data set follows a given distribution such as the normal or Weibull, and for visually
estimating the location and scale parameters of the chosen distribution. The data are plotted
against a theoretical distribution in such a way that the points should form approximately a
straight line. Departures from this straight line indicate departures from the specified
distribution.
Q–Q plot : In statistics, a Q–Q plot (Q stands for quantile) is a graphical method for
diagnosing differences between the probability distribution of a statistical population from
which a random sample has been taken and a comparison distribution. An example of the
kind of differences that can be tested for is non-normality of the population distribution.
Recurrence plot : In descriptive statistics and chaos theory, a recurrence plot (RP) is a plot
showing, for a given moment in time, the times at which a phase space. In other words, it is a
graph of

showing on a horizontal axis and on a vertical axis, where is a phase space

trajectory.

Scatterplot : A scatter graph or scatter plot is a type of display using variables for a set of
data. The data is displayed as a collection of points, each having the value of one variable
determining the position on the horizontal axis and the value of the other variable
determining the position on the vertical axis.[8]
Shmoo plot : In electrical engineering, a shmoo plot is a graphical display of the response of
a component or system varying over a range of conditions and inputs. Often used to
represent the results of the testing of complex electronic systems such as computers, ASICs
or microprocessors. The plot usually shows the range of conditions in which the device
under test will operate.
Spaghetti plots are a method of viewing data to visualize possible flows through systems.
Flows depicted in this manner appear like noodles, hence the coining of this term.[9] This
method of statistics was first used to track routing through factories. Visualizing flow in this
manner can reduce inefficiency within the flow of a system.

Weibull probability A normal Q–Q plot Scatterplot Spaghetti plot

plot

Stemplot : A stemplot (or stem-and-leaf plot), in statistics, is a device for presenting

quantitative data in a graphical format, similar to a histogram, to assist in visualizing the
shape of a distribution. They evolved from Arthur Bowley's work in the early 1900s, and are
useful tools in exploratory data analysis. Unlike histograms, stemplots retain the original
data to at least two significant digits, and put the data in order, thereby easing the move to
order-based inference and non-parametric statistics.
 Star plot : A graphical method of displaying multivariate data. Each star represents a single
observation. Typically, star plots are generated in a multi-plot format with many stars on each
page and each star representing one observation.
Surface plot : In this type of graph, a surface is plotted to fit a set of data triplets (X,Y,Z),
where Z if obtained by the function to be plotted Z=f(X,Y). Usually, the set of X and Y values
are equally spaced. Optionally, the plotted values can be color-coded.

Star plot Surface plot

Ternary plot : A ternary plot, ternary graph, triangle plot, simplex plot, or de Finetti diagram is
a barycentric plot on three variables which sum to a constant. It graphically depicts the ratios
of the three variables as positions in an equilateral triangle. It is used in petrology,
mineralogy, metallurgy, and other physical sciences to show the compositions of systems
composed of three species. In population genetics, it is often called a de Finetti diagram. In
game theory, it is often called a simplex plot.
Vector field : Vector field plots (or quiver plots) show the direction and the strength of a vector
associated with a 2D or 3D points. They are typically used to show the strength of the
gradient over the plane or a surface area.
Violin plot : Violin plots are a method of plotting numeric data. They are similar to box plots,
except that they also show the probability density of the data at different values (in the
simplest case this could be a histogram). Typically violin plots will include a marker for the
median of the data and a box indicating the interquartile range, as in standard box plots.
Overlaid on this box plot is a kernel density estimation. Violin plots are available as
extensions to a number of software packages, including R through the vioplot library, and
Stata through the vioplot add-in.[10]

Ternary plot Violin plot

Plots for specific quantities

Arrhenius plot : This plot compares the logarithm of a reaction rate ( , ordinate axis)
plotted against inverse temperature ( , abscissa). Arrhenius plots are often used to
analyze the effect of temperature on the rates of chemical reactions.
 Dot plot (bioinformatics) : This plot compares two biological sequences and is a graphical
method that allows the identification of regions of close similarity between them. It is a kind
of recurrence plot.
Lineweaver–Burk plot : This plot compares the reciprocals of reaction rate and substrate
concentration. It is used to represent and determine enzyme kinetics.

Arrhenius plot Dot plot

(bioinformatics)

3D plots

SteamTube plot

Examples
Types of graphs and their uses vary very widely. A few typical examples are:

Simple graph: Supply and demand curves, simple graphs used in economics to relate
supply and demand to price. The graphs can be used together to determine the economic
equilibrium (essentially, to solve an equation).
Simple graph used for reading values: the bell-shaped normal or Gaussian probability
distribution, from which, for example, the probability of a man's height being in a specified
range can be derived, given data for the adult male population.
Very complex graph: the psychrometric chart, relating temperature, pressure, humidity, and
other quantities.
Non-rectangular coordinates: the above all use two-dimensional rectangular coordinates; an
example of a graph using polar coordinates, sometimes in three dimensions, is the antenna
 radiation pattern chart, which represents the power radiated in all directions by an antenna
of specified type.

See also
Chart
Diagram
Graph of a function
Line chart
List of graphical methods
Plotting software
List of plotting programs

References
 This article incorporates public domain material from the National Institute of Standards and Technology
(https://www.nist.gov).

1. NIST/SEMATECH (2003). "The Role of Graphics" (http://www.itl.nist.gov/div898/handbook/e

da/section1/eda15.htm). In: e-Handbook of Statistical Methods 6 January 2003 (Date
created).
2. Altman DG, Bland JM (1983). "Measurement in medicine: the analysis of method
comparison studies". The Statistician. Blackwell Publishing. 32 (3): 307–317.
doi:10.2307/2987937 (https://doi.org/10.2307%2F2987937). JSTOR 2987937 (https://www.j
stor.org/stable/2987937).
3. Bland JM, Altman DG (1986). "Statistical methods for assessing agreement between two
methods of clinical measurement". Lancet. 1 (8476): 307–10. doi:10.1016/S0140-
6736(86)90837-8 (https://doi.org/10.1016%2FS0140-6736%2886%2990837-8).
PMID 2868172 (https://pubmed.ncbi.nlm.nih.gov/2868172). S2CID 2844897 (https://api.sem
anticscholar.org/CorpusID:2844897).
4. Simionescu, P.A. (2014). Computer Aided Graphing and Simulation Tools for AutoCAD
Users (1st ed.). Boca Raton, FL: CRC Press. ISBN 978-1-4822-5290-3.
5. R. J. Light; D. B. Pillemer (1984). Summing up: The Science of Reviewing Research.
Cambridge, Massachusetts.: Harvard University Press.
6. M. Egger, G. Davey Smith, M. Schneider & C. Minder (September 1997). "Bias in meta-
analysis detected by a simple, graphical test" (https://www.ncbi.nlm.nih.gov/pmc/articles/PM
C2127453). BMJ. 315 (7109): 629–634. doi:10.1136/bmj.315.7109.629 (https://doi.org/10.11
36%2Fbmj.315.7109.629). PMC 2127453 (https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2
127453). PMID 9310563 (https://pubmed.ncbi.nlm.nih.gov/9310563).
7. Galbraith, Rex (1988). "Graphical display of estimates having differing standard errors".
Technometrics. American Society for Quality. 30 (3): 271–281. doi:10.2307/1270081 (https://
doi.org/10.2307%2F1270081). JSTOR 1270081 (https://www.jstor.org/stable/1270081).
8. Utts, Jessica M. Seeing Through Statistics 3rd Edition, Thomson Brooks/Cole, 2005, pp
166–167. ISBN 0-534-39402-7
9. Theodore T. Allen (2010). Introduction to Engineering Statistics and Lean Sigma: Statistical
Quality Control and Design of Experiments and Systems (https://books.google.com/books?i
d=ev54lAwS2KIC&q=spaghetti+diagram+book&pg=PA128). Springer. p. 128. ISBN 978-1-
84882-999-2. Retrieved 2011-02-17.
10. Hintze Jerry L.; Nelson Ray D. (1998). "Violin Plots: A Box Plot-Density Trace Synergism".
The American Statistician. 52 (2): 181–84. doi:10.1080/00031305.1998.10480559 (https://do
i.org/10.1080%2F00031305.1998.10480559).

External links
Dataplot (http://www.itl.nist.gov/div898/handbook/eda/section3/eda33.htm) gallery of some
useful graphical techniques at itl.nist.gov.

Retrieved from "https://en.wikipedia.org/w/index.php?title=Plot_(graphics)&oldid=1139819240"