Cutout Templates for PanelView 5510 Terminals

Printed actual size (scale = 1:1). If you print this cutout template from the PDF, set the paper size on your plotter or printer to 610 mm (24 in.) x 457 mm (18 in.).

The cutout templates below are for cat. nos. 2715P-T7CD, 2715P-T7CD-B, 2715P-T7CD-K, 2715P-T7WD, 2715P-T7WD-B, 2715P-T7WD-K, 2715P-T10CD, 2715P-T10CD-B, 2715P-T10CD-K, 2715P-T15CD, 2715P-T15CD-B, 2715P-T15CD-K, 2715P-T19CD, 2715P-T19CD-B, and 2715P-T19CD-K.
To determine what template to use, locate the catalog number on your PanelView® 5510 terminal sticker. For other PanelView 5510 catalog numbers not shown below, see the opposite side.
Flat Side Flat Side
Round Side Round Side
6.5-in. Touch Only–6 Levers 6.5-in. Keypad and Touch–8 Levers
2 4 2 7 4

6 Back Side 5 Back Side

of Terminal 5 of Terminal 6

3 1 3 8 1

7-in. Touch Only–6 Levers 9-in. Touch Only, 10.4-in. Touch Only–8 Levers
2 4 2 4
8 7
6 5
Back Side Back Side
of Terminal of Terminal
6 5
3 1 3 1

10.4-in. Keypad and Touch,

12.1-in. Touch Only–10 Levers 15-in. Touch Only–12 Levers
2 9 4 2 9 4

7 6 7 6

290 mm (11.42 in.)

383 mm (15.08 in.)

Back Side of Terminal

142 mm (5.59 in.)

148 mm (5.83 in.)

224 mm (8.82 in.)

Back Side of Terminal
5 8 11 12

3 10 1 5 8
3 10 1

15-in. Keypad and Touch–14 Levers 19-in. Touch Only–16 Levers

8 2 4 6 8 2 4 6
11 10 11 10

13 16
Back Side of Terminal

6.5-in. Touch Only (2715P-T7CD, 2715P-T7CD-B, 2715P-T7CD-K) 184 mm (7.24 in.)

13 14 Back Side of Terminal

9 12 15 14
5 3 1 7
9

5 3 1 7
12
7-in. Touch Only (2715P-T7WD, 2715P-T7WD-B, 2715P-T7WD-K) 207 mm (8.15 in.)
Rotate each lever to its final lock position using the sequence shown for your
terminal size. The arrows indicate the direction to rotate each lever.
For complete installation instructions, see the PanelView 5510 Terminal User
Manual, publication 2715P-UM001.
For instructions on how to install the mounting clips on the PanelView 5510 stainless
steel terminals, see the Mounting Clips Installation Instructions, publication
2711P-IN006.

Lever Lock Typical

Position Panel Thickness Range Gauge 10.4-in. Touch Only (2715P-T10CD, 2715P-T10CD-B, 2715P-T10CD-K) 269 mm (10.59 in.)
1 1.50…2.01 mm (0.060…0.079 in.) 16
2 2.03…2.64 mm (0.080…0.104 in.) 14
3 2.67…3.15 mm (0.105…0.124 in.) 12
4 3.17…3.66 mm (0.125…0.144 in.) 10
5 3.68…4.16 mm (0.145…0.164 in.) 8/9
6 4.19…4.80 mm (0.165…0.188 in.) 7

2 1
6 5 4 3

15-in. Touch Only (2715P-T15CD, 2715P-T15CD-B, 2715P-T15CD-K) 353 mm (13.89 in.)

19-in. Touch Only (2715P-T19CD, 2715P-T19CD-B, 2715P-T19CD-K) 457 mm (17.99 in.)

Cutout Templates for PanelView 5510 Terminals
Printed actual size (scale = 1:1). If you print this cutout template from the PDF, set the paper size on your plotter or printer to 610 mm (24 in.) x 457 mm (18 in.).
The cutout templates below are for cat. nos. 2715P-B7CD, 2715P-B7CD-B, 2715P-B7CD-K, 2715P-T9WD, 2715P-T9WD-B, 2715P-T9WD-K, 2715P-T9WD-BSK, 2715P-B10CD, 2715P-B10CD-B, 2715P-B10CD-K, 2715P-T12WD, 2715P-T12WD-B, 2715P-T12WD-K, 2715P-T12WD-BSK,
2715P-B15CD, 2715P-B15CD-B, and 2715P-B15CD-K.
To determine what template to use, locate the catalog number on your PanelView 5510 terminal sticker. For other PanelView 5510 catalog numbers not shown below, see the opposite side.
Flat Side Flat Side
Round Side Round Side
PanelView 5510 stainless steel terminals use
6.5-in. Touch Only–6 Levers 6.5-in. Keypad and Touch–8 Levers
2 4 2 7 4 mounting clips, instead of mounting levers.
6 5
Torque each clip to its final lock position using
Back Side Back Side
of Terminal of Terminal the sequence shown for your terminal size.
5 6
Torque each mounting clip to 2.3…2.6 N•m
3 1 3 8 1
(20…23 lb•in).
7-in. Touch Only–6 Levers 9-in. Touch Only, 10.4-in. Touch Only–8 Levers
2 4 2 4
8 7 2 4
6
Back Side
5
Back Side 8 5
of Terminal of Terminal 9-in. Touch
8 Clips
6 5 6 7
3 1 3 1 3 1
10.4-in. Keypad and Touch,
12.1-in. Touch Only–10 Levers 15-in. Touch Only–12 Levers
2 9 4 2 9 4
2 9 4
7 6 7 6 7 6
12.1-in. Touch

290 mm (11.42 in.)

142 mm (5.59 in.)

162 mm (6.38 in.)

218 mm (8.58 in.)

224 mm (8.82 in.)

Back Side of Terminal 5 10 Clips
Back Side of Terminal 8
5 8 11 12 3 10 1
3 10 1 5 8
3 10 1

15-in. Keypad and Touch–14 Levers 19-in. Touch Only–16 Levers

8 2 4 6 8 2 4 6
11 10 11 10

13 16
Back Side of Terminal
13 14 Back Side of Terminal 6.5-in. Keypad and Touch (2715P-B7CD, 2715P-B7CD-B, 2715P-B7CD-K) 237 mm (9.33 in.)
9 12 15 14
5 3 1 7
9 12

5 3 1 7
Rotate each lever to its final lock position using the sequence shown for your
terminal size. The arrows indicate the direction to rotate each lever. 9-in. Touch Only (2715P-T9WD, 2715P-T9WD-B, 2715P-T9WD-K, 2715P-T9WD-BSK) 252 mm (9.92 in.)
For complete installation instructions, see the PanelView 5510 Terminal User
Manual, publication 2715P-UM001.
For instructions on how to install the mounting clips on the PanelView 5510 stainless steel
terminals, see the Mounting Clips Installation Instructions, publication 2711P-IN006.

Lever Lock Typical

Position Panel Thickness Range Gauge 12.1-in. Touch Only (2715P-T12WD, 2715P-T12WD-B, 2715P-T12WD-K, 2715P-T12WD-BSK) 312 mm (12.28 in.)
1 1.50…2.01 mm (0.060…0.079 in.) 16
2 2.03…2.64 mm (0.080…0.104 in.) 14
3 2.67…3.15 mm (0.105…0.124 in.) 12 10.4-in. Keypad and Touch (2715P-B10CD, 2715P-B10CD-B, 2715P-B10CD-K) 335 mm (13.19 in.)
4 3.17…3.66 mm (0.125…0.144 in.) 10
5 3.68…4.16 mm (0.145…0.164 in.) 8/9
6 4.19…4.80 mm (0.165…0.188 in.) 7

2 1
6 5 4 3

15-in. Keypad and Touch (2715P-B15CD, 2715P-B15CD-B, 2715P-B15CD-K) 418 mm (16.46 in.)
Allen-Bradley, PanelView, and Rockwell Automation are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.

Rockwell Automation maintains current product environmental information on its website at http://www.rockwellautomation.com/global/about-us/sustainability-ethics/product-environmental-compliance.page.

*PN-617581*
PN-617581
Publication 2715P-DS001C-EN-P - November 2021
Supersedes Publication 2715P-DS001B-EN-P - May 2020 Copyright © 2021 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.