SMARTWATCHES T92 Smart Watch

User Manual

SMART WATCHES T92 Smart Watch

Notices

The service environment of the product (excessively high or low temperature humid rainy draining or
dusty environment) operation specifications low battery etc may affect the normal use of the product.
Or even cause the damage to it to lease use the product properly

Please charge the product before first use, charging will take about 2 hours

In order to avoid accidents. Please use qualified accessories from formal manufacturers when charging

Do not charge the product when it is wet or in wet conditions

When measuring the sensor should be close to the skin and avoid moving

The measurement results of the product are for reference only and cannot be used for medical purposes
and basis

Some data such as time weather number of steps, sleep, etc are synchronized with the mobile phone or
network data after connecting the mobile phone through the Aand cannot be set manually

Contents hide

1 Product Composition

2 Function of the Button and Touch Control

3 Charge Description and Music Storage (U Disk)

4 Installation of APP

5 Connection of APP

6 Use Instructions of APP

7 Use Instructions of Watch

8 Troubleshooting

9 Brief Function Introduction of TWS Earphone

10 Documents / Resources
10.1 Related Manuals / Resources

Product Composition

Composition of product

Watch, Earphones for the watch Charging cable. User Manual, Packaging

Function of the Button and Touch Control

SMART WATCHES T92 Smart Watch – control

Charge Description and Music Storage (U Disk)

SMART WATCHES T92 Smart Watch – music storage

After the magnetic cable is successfully connected. The watch will display a charging Icon the other end
is connected to a standard USB interface. And the charging can be conducted

Notes.

Do not charge in a humid, watery environment:

Please ensure there is no dirt or corrosion on the watch body and the metal contacts on the magnetic
charging cable,

Please regularly clean the watch back and the metal contacts on the magnetic charging cable with a
piece of clean flannelette

This product is not equipped with a power adapter In order to ensure the safety of family and property,
you can use a computer USB interface or choose a power adapter with an output not exceeding 5V/1A
for charging. In order to avoid bursting or fire, don’t buy or use low-quality and shoddy power adapters.
Please buy qualified power adapters through formal channels.

2. One end of the magnetic cable is connected to the watch, and the other end is connected to the
computer USB interface After the computer reads the U disk of the watch, the song is stored in MP3
format only.

Installation of APP
Download the “V band” APP on your smartphone and install it on your smartphone You can search “V
band” in the APP store to download or scan the following OR code to download (the browser. Etc can
scan the code)

Note: Android supports 5.0 and above systems, as supports systems above 8 0 and Bluetooth hardware
above 4 0

Connection of APP

Install and open the APP for the first time: Allow the APP to obtain the corresponding permissions by
following the prompts. For iPhone, a Bluetooth pairing request will be prompted for the first time to
connect the APP. Tap “Pairing’ to connect and the watch can accept notifications and alerts such as
incoming calls and text messages pushed by the IOS system

Open the APP, tap ‘Add Device*, and search “T92’ for connection.lf there is more than one device
nearby when binding the device. Select the MAC to address of your watch (composed of 12 letters and
numbers) to bind (Check the watch MAC address through the method of watch’s Settings-About-MAC
address). If there is a Bluetooth icon on the top of the watch or shows a successful Bluetooth
connection, it indicates that the watch and the mobile phone are successfully connected

This product provides three Bluetooth signals, respectively are ‘T92″ watch Bluetooth
signal7T92_Audio*/watch amplifier-loudspeaker (watch speaker) signal: T92-R’/watch Bluetooth
earphone signal. Functions and methods of use are as follows: Swipe the UI of the watch’s main screen
to the left. Enter the music playback interface. Tap the menu icon in the lower-left corner and enter the
mode selection page

• ‘Watch Local Music” mode as shown in the figure below. Watch amplifier-loudspeaker (watch speaker)
plays watch memory music

• “Mobile Phone Music’ mode as shown in the figure below. Search for and connect to 4T92 Audio- with
mobile phone Bluetooth. After the successful connection, the watch amplifier-loudspeaker (watch
speaker) will play the music of the phone In this mode. The watch can use the functions of receiving and
making calls and voice control

“Bluetooth Earphone’ mode: as shown in the figure below, take out the Bluetooth earphone, search for
and connect to”T92-R” with the mobile phone’s Bluetooth, after a successful connection, the watch
earphone will play mobile phone music.

Use Instructions of APP

1. Sports

As for the step numbers and sleep, it is used to view the data recorded by the watch and the data
synchronized to the mobile phone, and the data can be viewed according to the date.

As for heart rate, blood pressure, blood oxygen, blood pressure, body temperature, tap “start check”
and the watch will start to measure. Please wear the watch as per the user manuals when measuring.
Select the icon in the upper right corner to view the recorded data.

As for GPs Running, select the icon in the upper right corner to view the recorded data. Select”Target
Setting’ , tap “start Training’ , the watch will start to work. The ‘Map Track’ can be viewed in the upper
right corner. If you want to stop, long press “Pause’ and select “End’ or “Continue”.

2. Device

Display the status of connected devices. “Unbind” can release the connection between the APP and the
watch.

Selection of dial plate -customize dial plate, you can choose “digital dial plate” and ‘analog dial-plate”.
Whether to display the month, day and week on the “Display Date” dial plate. The settings here only
apply to customizing dial plates. You can choose a customize background by taking a photo or a picture
stored in a mobile phone album.

Push Message: Used for the synchronous display of messages from the mobile APP on the watchlist is
recommended to open the call reminder function

Daily alarm clock. Set the alarm clock function

Camera control: shake the watch or tap the camera icon on the watch to control the camera function of
the phone

Other settings

24hour system: the time of the custom dial plate or the system’s own dial plate is displayed in a 12-hour
or 24-hour system

Search the device: the watch will vibrate when using this function

Do Not Disturb mode (DND mode), Set the time period of DND mode During the time period when it is
turned on, the watch can only receive but not display the push content allowed by the message push
function
Sedentary reminder within a set time period, the watch will send out a sedentary reminder by vibrating

Water Clock The watch can be set to vibrate to remind you to drink water within a time period

Heart rate test Interval time can be set to measure the heart rate regularly

Screen Light on While Hand Raising. When this function is turned on, the watch screen will light up when
you raise your hand

Contacts synchronization assistant: You can select the contacts in the phone contacts and synchronize
them to the watch contacts (limited to 1000 entries). You can select a single contact or all contacts in
the phone contacts

Restore Factory Defaults. Resume the watch to the default setting, and all the data in the watch will be
deleted The APP and the watch need to be reconnected and bound

Firmware upgrade: used to detect and upgrade the watch version. Check the MAC address of the watch

My

Personal data: used to set user data. Accurate personal data input is helpful for APP to analyze with
monitoring data

Target Setting: used to set the daily target number of steps

Use Instructions of Watch

Long press the Ul the interface of the main screen to enter the theme selection (you can also enter
through the settings-theme selection).

In this mode, the user can choose the system-provided dial plate or a custom dial plate

Swipe down on the main screen Ul interface to enter the shortcut menu

Do Not Disturb mode (DND mode): The watch can choose to turn this function or off. You can also
control the switch of the watch in the mobile phone APP “Device-Other Settings-DND mode. The watch
cannot control the phone APP in reverse

Do Not Disturb mode (DND mode): The watch can choose to turn this function or off, You can also
control the switch of the watch in the mobile phone APP “Device”-Oth-er Settings-DNOmodeThe watch
cannot control the phone APP in reverse.

Search the device: The watch searches for a bind mobile phone. When selected, the phone will make a
sound.
In the”Mobile Phone Music” mode, the mobile phone and the watch Bluetooth “T92_Audio” are
successfully connected. Select to connect or disconnect Bluetooth by tapping on the icon. The selection
here cannot change the ” Mobile Phone Music’ mode. If you need to switch to other modes, please
follow the instructions in Section 5-APP Connection -Article 3 of this Manual.

Go to settings

3. Swipe the main screen UI interface to the right to enter the player page (you can also swipe the
main screen UI interface to the left to enter the menu mode-music, enter), :tap the menu icon
to enter the mode selection page. Please refer to Section 5 -APP Connection – Article 3 of this
Manual for details. In the “Watch Music” and “Bluetooth Earphone” modes on the Player page,
swipe the screen upwards to view the “Music Lst’ in the watch memory card. In the “Mobile
Phone Music” mode, swipe the screen upwards to enter the “Voice Control function. Swipe the
screen downwards to enter the”Call function.

4. Swipe the main screen UI interface upwards to view incoming messages (you can also swipe the main
screen UI interface to the left to enter the menu mode-message, enter), Swipe left and right to view the
messages, and tap the delete button to delete: he messages. The message content is not editable on the
watch.

5. Swipe the main screen UI interface to the left to enter the menu mode:

• settings

About View device information: model, version number, date of manufacture, MAC address, etc.

Theme selection: the user can choose the system-provided dial plate or a custom dial plate.

Language: language set.’Auto”, the watch is synchronized with the language of the bound mobile phone
APP.

Style switching.: Two options for style switching. Slide the UI interface of the main screen to the left to
enter the menu mode to display different styles.

Brilliance Control Adjust the brilliance of the watch and offer five levels of brilliance options.

Screen light-up time control adjusts the time of the watch’s screen light-up and provides 4 options of 5S,
105, 15S and 20S

Restart the watch.

Restore Factory Defaults: resume the watch to the default setting Shut down the watch.
Heart rate measures your current heart rate value and displays the measurement result

Thermometer: measures your current body temperature and displays the measurement result

Blood pressure: measure your current blood pressure value and display the measurement result.

Call function You can use the watch to dial and make outgoing calls

Note: This function must be applied in the -Mobile Phone Music mode, and when the watch is
successfully connected to the mobile phone APP, and the Bluetooth connection of “T92” and
“T92_Audio” is successful. Please follow the instructions in Section 5 -APP Connection – Article 3 of this
Manual, and set the mode as the Mobile Phone Music mode

Contact: Query the address book imported through the APP

Call records. You can view the incoming and outgoing calls.

Messages. The received messages can be viewed or deleted, but cannot be edited

Music: please refer to the instructions in Section 5 -APP Connection – Article 3 of this Manual for details.

VOICE ASSISTANT/ SIRI wakes up. Tap the voice icon to wake up the phone voice assistant

Note: This function must be applied in the “Mobile Phone Music” mode, and when the watch is
successfully connected to the mobile phone APP, and the Bluetooth connection of “T92* and “T92
Audio” is successful Please follow the instructions in Section 5 -APP Connection – Article 3 of this
Manual, and set the mode as the Mobile Phone Music mode.

Recording: Tap on the red heart to start recording, and tap again to stop recording Swipe the screen to
the left to view and play the recording.
Step Number: Pedometer Function.

Sleep Log in tc the APP to view, display the daily, weekly, and monthly sleep data in the form of charts.
And calculate the daily sleep quality and sleep duration, and you can also quasydmidory

Note The sleep data starts to detect sleep from 9 pm

Blood oxygen: measure the current blood oxygen and display the measurement result.

Sports: Provide sports mode of running, brisk walking, mountain-climbing, yoga. Elliptical machine,
football, basketball, badminton, cycling, table tennis. Record the exercise time and calories in the
interface of each mode Tap to enter, and swipe right to exit

Stopwatch

Countdown

Clock settings

Find phone

Calculator

Weather The watch has successfully connected with the APP of the mobile phone The watch will
regularly synchron ze the weather data of the server through network data in the background of the
mobile phone This function cannot be set manually

QR code: Scan the code on your mobile phone to download the APP.

http://app.xincore-tech.com/index.php/home/common/downApp

Troubleshooting
APP cannot be connected or some functions are unstable

The battery level of the watch may be too low and needs to be charged

Check whether certain functions are in the corresponding watch mode Please refer to Section 5

APP Connection

Article 3 of this Manual for details

Whether the Bluetooth of the mobile phone is turned on

Whether the APP permissions are open in the phone settings

Rule out the possibility that other people may connect to the watch by mistake or that the watch is
connected by other mobile phones when multiple devices are nearby.(At this point,you should delete
the device from another mobile phone that is bound to it. If you are using an iPhone, you need to find
the device name in the Bluetooth of the phone and tap Ignore The Device.)

The phone is connected to, or was connected to, too many Bluetooth devices. It IS recommended that
no more than 10 devices are currently connected or have been connected to the Bluetooth of the
mobile phone.

The distance between the phone and the watch is too long or there is an obstacle between the two.

App permissions in the mobile phone, such as storage, call, location information, camera, etc. are turned
on.(Because there are too many mobile phone brands, the questions prompted dunng APP installation
and the method of setting APP permissions on the mobile phone will be different.By default, you just
need to agree to open the corresponding permissions by following the installation prompts of the APP. If
the operation is wrong or the function of the APP is blocked due to the permission problem, the user
should set the corresponding permission of the APP according to his/her mobile phone brand.)

The APP or watch version needs to be upgraded.

2. Functions such as message. Weather and time cannot be sot or modified, or cannot be pushed.