DPR Clening Procedure

Download as pdf
Download as pdf
You are on page 1of 3
Necossay Device Cheek No. Picture Discription Part Number: Remark ger Water Installed the beating Nechine device by air ® DPF Water W This capacity of weeping _ container is required lachino serene anit faced) Sewage water Flocculant | SO809—-E0017 | l0kg DPF RINSE-W | oo @ 5 ao . por ko sos 9032 | topes DPF RINSE-W SO823-E9031 | 50sets Shower Hose It can select nozzle of shower and jet. equipment. é Air Nozi ® - 4 a Men for air blo a |@ Beating _ Boating device by air “ y equipment. depper or something . Colander for ® Floceulant - Goods on the market seattering Protective Antidust- mask © | we | a - Glove Safety glass 1/3 1. Cleaning [Caution] It is not the poison and deleterious substance, but you must wear the protective equipment (mask, glove and glass) to prevent for skin problem, DPR is heavy, so you must be handling it by more than to person, (1)set up in the DPF Water Soaping Machine DPR is set up as shown in the picture. Input side (black) is downrard, Output side (white) is upward Put plug to pool the wastewater. el up in the DPF Water Soaping Machine (2) Cleaning with water Use Tap water © Shaking with shower water from output side (white @ Shaking with shover omens wt ® Break off the clogging with jet water from input side (black). ) Cleaning up with jet water from output ide (white). It will need 100L for large size DPR. @ Draining with air blow (around 3 minutes) @ Break off clogging with jet water [caution] It has possibility to break DPR if it is cleaned with high pressure water. After finishing this cleaning, install it to the machine, Start the manual’ regeneration and check the differential pressure. eaning with jet (for water drain and dry) water [Caution] Steam will be coming from exhaust pipe in the process of drying. @ Draining with air blow culati [NG] (OK 1 Sediment is Sediment is not solidify, solidify. Skimming Skimming is not clear. clear. DPF RINSE-W Check and color sample (4) Install the Plocculant and beating Install the Floceulant with colander. (Plocculant 500g per 1001, water) Beating with eauipment. (3-5 minutes) (2) Check the flocculated condition Stop the beating and check the flocculated condition visually. (See left photo) Go to 3.Check the water quality Go to (3)Reinstall the Flocculant. (3)Reinstall the Plocculant Reinstall the Floceulant. (Floceulant 100g per 100L) Beating with equipment (1 minutes) Go to (2) Check the flocculated condition, (1)Cheek the skimming water Prepare the DPF RINSE-W Check and pick up the skimming water (around Ice). (2)Check the condition with color sample. Check the zine concentration. less than 2. 0mg/L---Go to 4.Water drain and disposition. more than 2, Omg/L--~Go to 2, (3) Reinstall the Flocculant. (1) Install the filter Install the filter steadily. (2) Remove the plug Filtration with filter. Check the condition of filter to prevent clogging for sediment and wastewater. (3) Water drain and disposition ‘The filtrated water drain as wastewater. Filter and sediment is disposed as industrial wastes. 3/3

You might also like