Summative Test Simple Machine
Summative Test Simple Machine
Summative Test Simple Machine
SIMPLE MACHINE
TEST 1
Directions: Match the tools needed to do the task in Column A with the objects in Column B.
Write your answer on a separate sheet of paper.
TEST 2
Directions: Answer the following by choosing the correct characteristic and use of each
simple machine. Write the letter of your answer on a separate sheet of paper.
TEST 3
Directions: Match the simple machines in Column A with its characteristics and uses in Column
B. Write your answer on a separate piece of paper.
TEST 4
Directions: Identify the type of simple machine shown on each illustration. Write LEVER,
PULLEY, WEDGE, INCLINED PLANE, SCREW, or WHEEL AND AXLE. The first number is done
for you.
TEST 5
Directions: Directions: Classify the following simple machines listed inside the box according to
its type.
1. When Mary cooks fried chicken, she uses tongs to remove the chicken from the pan. Which of
the following simple machines do tongs belong?
A. inclined plane C. lever
B. pulley D. wheel and axle
3. The carpenter will put the hinges of the door. Which type of simple machine will the carpenter
use?
A. lever C. pulley
B. inclined plane D. screw
4. Jamie uses a wheelbarrow to move the pile of garbage. Which type of simple machine is a
wheelbarrow?
A. inclined plane C. lever
B. pulley D. wheel and axle
6. Mark wanted to go sailing. Which of the following simple machines will be used in raising a
sail of a boat?
A. lever C. pulley
B. wedge D. wheel and axle
7. The bottom part of a bulb is spiral. Which type of simple machine is it?
A. inclined plane C. screw
B. wedge D. wheel and axle
8. To control a car, one should use a wheel and axle. Which of the following is the right tool to
use?
A. breaks C. rolling pin
B. steering wheel D. shift gear
9. Virgel wanted to load heavy boxes at the back of his truck. Which simple machine should
Virgel use?
A. pulley C. inclined plane
B. stairs D. wheelbarrow
10.Which simple machine is a double inclined plane and has a sharp edge?
A. pulley C. lever
B. screw D. wedge