TD-15MCRAWLER DOZER

STD-LT-WT-LGP

Net Horsepower Operating Weight Blade Capacity

142 kW (190 hp) 20 660 kg (45,547 lb) STD up to 5.95 m3 (7.8 yd3)
20 810 kg (45,878 lb) LT
21 315 kg (46,991 lb) WT
21 620 kg (47,663 lb) LGP
The new TD-15M Extra
is one of the best in the business
for productivity
and comfort because
of excellent design,
performance features
and a wide choice of
mounted equipment
for four distinct models.

Semi-U blades of 5.7 cu.m (7.45 cu.yd) for STD&LT track frame and Angle blade of 3.8 cu.m (5 cu.yd) used with STD&LT track frame, is
5.95 cu.m (7.8 cu.yd) for WT version, combine penetration ability of ideal for side-casting, backfilling, cutting ditches or setting a final grade
straight blade with increased capacity provided by short wings. by reducing amount of maneuvering required to do these jobs.
The blades can be equipped with tilt or tilt/pitch option. 2-cylinder blade tilt is offered as an option.
 Cummins QSC8.3 engine meets
U.S. EPA Tier3 and EU StageIIIA emissions standards.
The QSC advanced electronics provide enhanced
engine performance with higher torque and better
throttle response at every rpm.
With its ideal combination of electronic controls and
durable block design, this engine is ready to meet
even toughest machine work conditions.
Long maintenance intervals, better cold starting and
quieter operation provide improved operator comfort.

6-way hydraulic angle blade of 3.8 cu.m (5 cu.yd) used with 2.03 m (80 in) Straight blade of 3.6 cu.m (4.7 cu.yd) used with 2.16 m (85 in) gauge
gauge wide track (WT) and max. shoe width of 560 mm (22 in) is applicable and 940 mm (37 in) track shoes (LGP) is designed for soft, swampy
for versatile operations such as finish grading, spreading material and light areas. This blade may be equipped with hydraulic tilt cylinder to perform
land clearing. efficiently landscaping operations.
 The comfortable cab with air
recirculation system has been
sealed, sound suppressed and
separated from the engine
compartment.
Demountable 6-sided cab with
deluxe interior provides superior
all-around visibility and operator’s
comfort.
Two doors with side sliding
windows and large window area
provide good blade and ripper
viewing for precise control of
mounted equipment.

Air suspension type operator’s

seat is adjustable and equipped The left hand joystick controls
with full arm rests and 3 in re- trans-mission and steering drive for
tractable seat belt. up and down shifting, steering Hi/Lo
The seat swivels 14° to the selection and LH/RH gradual turn.
right for better blade and ripper Preset travel speed selection and
viewing and enhanced control- auto – downshift provide comfort-
lability thus reducing operator’s able operation and high productiv-
fatique. ity without manual downshifting.
Optional sweeps and screening package are designed to
provide operator protection in various types of forestry
applications.

Various blade control levers are used for distinct work

equipment specifications (tilt only, tilt/pitch or 6-way
blade).
Pilot operated hydraulic controls are offered as an option.
The right hand ergonomical lever controls raise and lower
of the ripper.
ENGINE STEERING & BRAKING
* Make and Model ............................................... Cummins QSB 8.3 Two speed geared steering module provides gradual turns while
Type . .................................................................... In-line, 6-cylinder maintaining full power to both tracks plus conventional clutch-brake
Aspiration .................................................. Turbocharged and CAC performance for tight or pivot turns. This type of steering system
offers superior traction in all types of operations and terrain.
Fuel system . ........................................................ HPCR Electronic
Coupled to 3–speed transmission, the 2–speed steering provides
Gross Horsepower, SAE J1995 ............................ 153 kW (205 hp) 6 speeds forward and 6 reverse. The left hand joystick controls
Net Horsepower, SAE J1349/ISO 9249 ................ 142 kW (190 hp) transmission and steering drive for up and down shifting,
Rated rpm ........................................................................ 1950 rpm steering, Hi/Lo selection and LH/RH gradual geared turn.
Max. torque @ 1450 rpm . ............................... 1010 Nm (745 ft-lb) Foot pedal applies both brakes for parking and downhill control.
Displacement . ........................................................... 8.3 l (505 in3) Brakes are spring applied and hydraulically released.
Bore and Stroke ............................... 114 x 135 mm (4.49” x 5.32”)
Air cleaner ..................................... dry type with exhaust aspirated
primary and safety elements
FINAL DRIVES
and service indicator Double-reduction module provides desired gear reduction at the
* Meets EU Stage IIIA and EPA Tier 3 emission regulations sprocket. Ring-type sprocket distributes wear evenly over track
bushings, letting every tooth ride free one-half of the time to reduce
wear. Final drives or sprockets are replaceable without removing
track frames.

TRANSMISSION & TORQUE CONVERTER TRACK FRAME

Modular, countershaft type power shift, electro-hydraulic control. All-welded heavy box section track frame is kept in alignment with
Preset travel speed selection and auto-downshift. track frame guides providing true vertical oscillation.
Single stage 370 mm (14.6”) torque converter with a 2.6:1 stall Track rollers, each side STD (LT, LGP) . .................................... 6(8)
ratio drives to transmission through a double universal joint. Top idlers, each side ..................................................................... 2
Front idlers (drum type) ................................................................ 1
All rollers and idlers ........................................... lifespan lubricated
Oscillation at center of front idler (STD) .............. 293 mm (11.52”)
Oscillation at center of front idler (LT, WT, LGP) . ... 353 mm (13.9”)
TRAVEL SPEEDS
Gear Range Forward Reverse TRACKS
km/h (mph) km/h (mph) Lubricated Track System (LTS) virtually eliminates internal pin and
1 st Low 2.7 (1.7) 3.2 (2.0) bushing wear through use of a patented seal assembly.
High 3.6 (2.2) 4.3 (2.7) The split master link reduces chain removal and installation time.
2 nd Low 4.9 (3.0) 5.7 (3.5) STD LT WT LGP
High 6.5 (4.0) 7.6 (4.7) Track shoe width, 508 mm 508 mm 762 mm 940 mm
3 rd Low 7.7 (4.8) 9.0 (5.6) standard (20”) (20”) (30”) (37”)
High 10.2 (6.3) 11.9 (7.4) Track shoes, each side 39 43 43 43
Ground contact area 2.7 m2 3.1 m2 4.6 m2 5.7 m2
(4,160 in2) (4,800 in2) (7,200 in2) (8,880 in2)
Ground pressure 75.4 kPa 65.8 kPa 44.9 kPa 36.9 kPa
(w/std. equipment) (10.9 psi) (9.5 psi) (6.5 psi) (5.4 psi)
Y

MC L/

Height of grouser...................................................... 64 mm (2.52”)
Ground clearance................................................... 445 mm (17.5”)


REFILL CAPACITIES




Liter (US gal)
  Fuel tank 388 (102.5)
TU
-08 Cooling system 50 (13.2)

Crankcase w/filters 23 (6.1)

TU
)*() Transmission system 153 (40.4)

Differential & final drive, each 40 (10.6)
 Hydraulic reservoir 60 (16)
OE
-08

 OE
)*()

OPERATING WEIGHT
 Includes, standard equipment and 6-way blade:

 SE
-08 STD LT WT LGP
SE
)*() Type of blade Semi-U Semi-U Semi-U Straight

Canopy ROPS 20110 kg 20260 kg 20765 kg 27070 kg
  LNI (44,335 lb) (44,665 lb) (45,779 lb) (46,451 lb)
           
NQI
Cab ROPS 20660 kg 20810 kg 21315 kg 21620 kg
        (45,547 lb) (45,878 lb) (46,991 lb) (47,663 lb)
 

N



N


&
5%.

"

#
%


N


45% $ 
N


45%
-5

N


-5
85
-(1 
N


85

N


45% 
N


-(1

N


-5
85
-(1 
N


45%
-5
* OVERALL HEIGHT w/Canopy ROPS/FOPS – 3.50 m (138”) 
N


85

N


-(1
VERTICAL DIMENSIONS INCLUDE 64 mm (2.52”) GROUSER HEIGHT

OVERALL DIMENSIONS WITH EQUIPMENT

BLADE SELECTION
UNDRCARRIAGE
SEMI-U ANGLE 6-WAY SEMI-U STRAIGHT
Length with blade, STD 5.23 m (17’2”) 5.39 m (17’8”) — — —
and drawbar LT 5.67 m (18’7”) 5.83 m (19’2”) — — —
WT — — 5.87 m (19’3”) 5.67 m (18’7”) —
LGP — — — — 5.52 m (18’1”)
Length with blade, STD 6.48 m (21’3”) 6.55 m (21’6”) — — —
and multi-shank ripper LT 6.91 m (22’8”) 6.99 m (22’11”) — — —
WT — — 7.03 m (23’1”) 6.94 m (22’9”) —
Length with blade STD 6.25 m (20’6”) 6.40 m (21’) — — —
and single-shank ripper LT 6.76 m (22’2”) 6.84 m (22’5”) — — —
WT — — 6.88 m (22’7”) 6.79 m (22’3”) —
Width, blade angled STD&LT — 3.75 m (12’4”) — — —
WT — — 3.33 m (10’11”) — —
Width over trunnions STD&LT 2.81 m (9’3”) 2.81 m (9’3”) — — —
WT — — — 2.91 m (9’7”) —
LGP — — — — 3.34 m (10’ 11”)
Width over „C” frame STD&LT — 3.82 m (12’6”) — — —

BLADE SPECIFICATIONS
UNDERCARRIAGE STD&LT STD&LT WT WT LGP
BLADE SELECTION SEMI-U ANGLE 6-WAY SEMI-U STRAIGHT
Track shoes 20”/22”/24”/26” 20”/22”/24”/26” 20” or 22” 30”/26”/24”/22”/20” 37”
Blade capacity, SAE J1265 5.7 m3 (7.45 yd3) 3.8 m3 (5 yd3) 3.8 m3 (5 yd3) 5.95 m3 (7.8 yd3) 3.6 m3 (4.7 yd3)
Blade dimensions: – with over end bits 3.44 m (135”) 4.13 m (163”) 3.68 m (145”) 3.59 m (141”) 3.86 m (152”)
– height A 1.46 m (58”) 1.12 m (44”) 1.20 m (47”) 1.46 m (58”) 1.10 m (43”)
Max. lift, straight B STD 1104 mm (43.5”) STD 1102 mm (43.4”)
1280 mm (50.4”) 1102 mm (43.4”) 1240 mm (49”)
LT 1102 mm (43.4”) LT 1119 mm (44”)
Max. drop below ground level C STD 552 mm (21.7”)
463 mm (18.2”) 715 mm (28.1”) 463 mm (18.2”) 455 mm (18”)
LT 542 mm (21.3”)
Max. tilt adjustment D 724 mm (28.5”) 385 mm (15.2”) 470 mm (18.5”) 782 mm (30.8”) 698 mm (27.5”)
Blade angle, either side — 25o 23.5o — —
Max. pitch adjustment E 9o — 8o 9o 9o
Weight of blade equipment 2670 kg (5,886 lb) 2700 kg (5,952 lb) 2575 kg (5,677 lb) 2760 kg (6,085 lb) 2740 kg (6,040 lb)

RIPPER SPECIFICATION
RIPPER SELECTION MULTI-SHANK SINGLE-SHANK
Tool Beam
Overall width 2230 mm (88”) 1100 mm (43”)
Cross section (height x width) 229 x 254 mm (9” x 10”) 269 x 284 mm (10.6” x 11.2”)
Ground clearance under tool beam: – ripper raised 1023 mm (40.3”) 995 mm (39”)
– ripper lowered 108 mm (4.3”) 80 mm (3”)
Shanks
Number of shanks per ripper, max. 3 1
Spacing center to center 1015 mm (40”) —
Penetration, max. 600 mm (24”) 713 mm (28”)
Ground clearance, max. raised 455 mm (17.9”) 485 mm (19”)
Shank positions (vertical) 2 2
Weight
Complete, including one shank 1554.5 kg (3,427 lb) 1546 kg (3,408 lb)
Each additional shank 94.5 kg (208 lb) —
Penetration Force 64 kN (14,387 lb) 71.04 kN (15,970 lb)
Pryout Force 268.7 kN (60,404 lb) 390.9 kN (87,874 lb)
TD-15M
CRAWLER DOZER
STD-LT-WT-LGP

HYDRAULIC CONTROL SYSTEM

Pump, tandem gear, driven from torque converter. Cylinders, bore and stroke:
Output @ rated engine rpm........................................... 173 l/min (46 gpm) lift (STD)................................................... 101.6 x 1233.5 mm (4” x 48.6”)
Relief valve setting........................................................ 17.2 MPa (2,500 psi) lift (LT, WT, LGP).......................................... 101.6 x 1095 mm (4” x 43.1”)
tilt................................................................. 139.7 x 147 mm (5.5” x 5.8”)
tilt/pitch......................................... 139.7/152.4 x 147 mm (5.5”/6” x 5.8”)

STANDARD EQUIPMENT
• Air cleaner, dry type with exhaust aspirated • Hitch, retrieval • Water separator, fuel system
primary and safety elements and service • Horn, electric • UNDERCARRIAGE
indicator • Hydraulic control, 2-spool valve, 1 lever (lift/tilt) Track frames, oscillating type, lifespan lubricated
• Alarm, back-up • Instruments: rollers and idlers
• Alternator, 50 A – Gauges: fuel level, engine coolant temp., Track adjusters, hydraulic
• Antifreeze, -37°C (-34°F) engine oil pressure, torque converter oil temp., Track chain end guides, integral
• Batteries, (2) 12 V, 815 CCA, maintenance free voltmeter, hourmeter, brake lock – STANDARD (STD)
• Brakes, foot, spring applied, hydraulically – Warning lights: air cleaner filter, transmission Track chain, sealed and lubricated (LTS)
released oil filter, hydraulic oil filter, transmission/clutch with split master link, 39 links
• Canopy, 2 post ROPS/FOPS (SAE J1040, J231) oil low pressure Track frame, 6 roller, 1930 mm (76”) gauge
• Coolant filter conditioner – Audible & visual warning system: low engine Track shoes, 508 mm (20”) severe service
• Cooling module; includes radiator, transmission coolant level, low engine oil pressure – LONG TRACK (LT)
oil cooler, charge air cooler; isolation mounted • Lights with guards, 2F – lift cylinders, Track chain, sealed and lubricated (LTS)
• Decelerator – right foot pedal and brake – center 2R – fuel tank mounted with split master link, 43 links
foot pedal • Muffler, under engine hood, insulated Track frame, 8 roller, 1930 mm (76”) gauge
• Diagnostic centers for power train and • Radiator guard door, hinged, louvered Track shoes, 508 mm (20”) severe service
equipment hydraulic pressures • Rear operator platform Track chain center guides
• Ecological drains for engine oil, radiator coolant • Receptacle, starting/charging – WIDE TRACK (WT)
and hydraulic oil • Seat belt (SAE J386) – 3” wide, retractable Track chain, sealed and lubricated (LTS) with
• Engine hood, solid, sloped • Seat, deluxe, air suspension type, vinyl cover, split master link, 43 links
• Exhaust pipe extension adjustable with arm rests, swivel 14° to right Track frame, 8 roller, 2030 mm (80”) gauge
• Fan, blower • Starting aid – air grid heater Track shoes, 762 mm (30”) severe service
• Filters engine oil, full flow and by-pass with • Starting, 24 V Track chain center guides
replaceable ”spin-on” elements • Steering, planetary type, 2 speed, left hand – LOW GROUND PRESSURE (LGP)
• Filters, power train single lever control (joystick) Track chain, sealed and lubricated (LTS) with
• Final drive seal guard • Tools compartment split master link, 43 links
• Fuel strainer • Torque converter, single stage Track frame, 8 roller, 2160 mm (85”) gauge
• Guards: crankcase, hinged, with front pull hook, • Transmission power shift, 3 speeds forward, Track shoes, 940 mm (37”) extreme clipped
transmission, fan, radiator and sprocket rock 3 reverse, preset travel speed selection and corner with bolt holes for 3 rd rail track
and dirt deflector auto-downshift Track chain center guides

OPTIONAL ATTACHMENTS
• AM/FM CD radio – Sun visor in cab • Lights, 2F, ROPS mounted, for use with cab,
• Batteries, cold start (2) 12 V, 960 CCA – Sweeps, forestry, front and rear (not for use with sweeps)
• Blade Equipment (STD & LT): – Screen rear (includes deduct for standard • Mirrors, 2 pcs. exterior (for use w/cab)
– Semi-U Dozer, 5.7 cu. m (7.45 cu. yd) operator platform) • Pilot operated hydraulic controls:
Hydraulic tilt – Seat, air suspension, fabric cover (for use w/cab) – 3-spool valve (3 rd section plugged), 1 lever
Hydraulic tilt/pitch • Drawbar, fixed (for use with 6-way or tilt/tilt-pitch)
– Angle Dozer (manual angle), 3.8 cu. m (5 cu. yd) • Engine enclosures: – 3-spool valve, 2 lever
Hydraulic tilt – Perforated side doors and hood (for use w/ripper and tilt/tilt-pitch or 6-way)
• Blade Equipment (WT): – Perforated side doors and solid hood • Ripper, multi-shank, max. 3 shanks
– Semi-U Dozer, 5.95 cu. m (7.8 cu. yd) – Perforated engine hood • Ripper, single-shank
Hydraulic tilt • Exhaust pipe extension w/guard, for sweeps • Screening pkg; cab for screens installation
Hydraulic tilt/pitch • Guards: must be ordered:
– Angle Dozer (6-way), 3.8 cu. m (5 cu. yd) – Crankcase, severe service w/front pull hook – Screens for cab windows
full hydraulic, inside arm with hydraulic tilt, – Final drive, rock (STD, LT, WT) (front, rear, side and doors)
angle and manual pitch – Tank guard, bolted – Screens for tractor and cab lights
• Blade Equipment (LGP): – Track roller, full length • Starting/charging receptacle plug assembly
– Straight Dozer, 3.6 cu. m (4.7 cu. yd) – Transmission, severe service • Third rail track system (LGP)
Hydraulic tilt • Hydraulic controls: • Tools in metal box
• Cab and ROPS Equipment: – 2-spool valve, 1 lever • Track shoes, set of 78, severe service (STD)
– Air conditioner/heater/pressurizer/defroster, (for use with 6-way or tilt-pitch) 560 mm (22”), 610 mm (24”), 660 mm (26”)
underseat mounted; A/C condenser behind roof – 3-spool valve, 2 lever • Track shoes, set of 86, severe service (LT)
– Air recirculation system with MSHA filters (for use w/ripper and tilt/tilt-pitch or 6-way) 560 mm (22”), 610 mm (24”), 660 mm (26”)
– Cab w/sound suppression, 4 wipers • Instrument panel guard • Track shoes, set of 86, severe service (WT)
w/washers, inside mirror, dome light, tinted (for use w/Canopy ROPS/FOPS) 508 mm (20”), 560 mm (22”),
safety glass and air recirculation system • Lights for Canopy ROPS/FOPS, 2F–2R 610 mm (24”), 660 mm (26”), not for use with
– Heater /pressurizer/ defroster • Lights for cab, 2F–2R Angle Dozer (6-way)
– ROPS for cab or forestry attachment • Lights for cab and sweeps, 2F–2R • Vandalism protection
Specifications subject to change without notice. Ilustrations and pictures may include optional attachments and accessories and may not include all standard equipment.

MS-4019-DSS11 April 2009 ©2008–2009 Dressta Co. Ltd.