PVP2016-63815: 3D RESIDUAL STRESS SIMULATION OF AN EXCAVATE SESSION 1.

4I (MF-16-1)
AND WELD REPAIR MOCKUP Monday, July 18, 4:00 pm – 5:45 pm, Perspectives Level (34th Floor), English
F. Ku, Structural Integrity Associates, Inc., San Jose, CA, USA; P. Riccardella, Bay (S)
Structural Integrity Associates, Inc., Highlands Ranch, CO, USA; S. McCracken, PLASTIC PIPES AND COMPONENTS
Electric Power Research Institute, Harrisburg, NC, USA
Developed by: S. Kalyanam, Engineering Mechanics Corporation of Columbus,
PVP2016-63951: OPTIMAL WELD DESIGN OF PLUG REPAIR IN REACTOR
Columbus, OH, USA; D. J. Shim, Structural Integrity Associates,
PRESSURE VESSEL WITH 3D COMPUTATIONAL WELD MODELING
Inc., San Jose, CA, USA
F. Brust, Engineering Mechanics Corporation of Columbus, Columbus, OH, USA;
Chair: M. Troughton, TWI Ltd., Cambridge, United Kingdom
D. Barton, Westinghouse, Rock Hill, SC, USA
Co-Chair: M. Uddin, Engineering Mechanics Corporation of Columbus,
SESSION 1.4G (MF-5-1) Columbus, OH, USA
Monday, July 18, 4:00 pm – 5:45 pm, Plaza Level (Second Floor), Georgia A PVP2016-63107: DAMAGE IN POLYETHYLENE GAS PIPE: ITS EVOLUTION,
DAVID SMITH MEMORIAL SESSION ON EUROPEAN PROGRAMS IN STRUC- CHARACTERIZATION AND INFLUENCE ON DEFORMATION AND FRAC-
TURAL INTEGRITY TURE BEHAVIOR (Presentation Only)
David Smith Memorial Symposium—Sponsored by Materials & Fabrication B. Jar, Y. Zhang, University of Alberta, Edmonton, AB, Canada
Technical Committee PVP2016-63432: EVALUATION OF A NEW APPROACH FOR CHARACTERIZ-
Developed by: P. James, Amec Foster Wheeler, Warrington, United Kingdom; ING ENVIRONMENTAL STRESS CRACKING RESISTANCE (ESCR) OF POLY-
E. Keim, AREVA, Erlangen, Bavaria, Germany; D. Moinereau, ETHYLENE
Electricite De France, Moret-sur-Loing, France; T. Nicak, AREVA, B. Jar, Y. Zhang, University of Alberta, Edmonton, AB, Canada
Erlangen, Germany PVP2016-63595: SHORT-TERM AND LONG-TERM MECHANICAL TESTING
Chair: P. James, Amec Foster Wheeler, Warrington, United Kingdom TO EVALUATE THE EFFECT OF FLAWS IN BUTT FUSION JOINTS IN POLY-
Co-Chair: T. Nicak, AREVA, Erlangen, Germany ETHYLENE PIPES
PVP2016-63459: FRACTURE-MECHANICS ANALYSIS OF THE REACTOR M. Troughton, A. Khamsehnezhad, TWI Ltd., Cambridge, United Kingdom
PRESSURE VESSEL BEZNAU 1 BASED ON THERMAL-HYDRAULICS INPUT PVP2016-63688: EVALUATION OF ULTRASONIC PHASED-ARRAY FOR DE-
DATA FROM KWU-MIX AND CFD ANALYSES TECTION OF PLANAR FLAWS IN HIGH-DENSITY POLYETHYLENE (HDPE)
T. Nicak, E. Keim, AREVA, Erlangen, Germany; H. Hägeli, Axpo AG NPP Beznau, BUTT-FUSION JOINTS
Döttingen, Switzerland; R. Trewin, I. Cremer, AREVA, Erlangen, Germany M. Prowant, K. Denslow, T. Moran, R. E. Jacob, T. S. Hartman, Pacific Northwest
PVP2016-63511: WARM PRE-STRESS TESTS OF THE IRRADIATED RPV National Laboratory, Richland, WA, USA
BASE MATERIAL OF BEZNAU UNIT 1 SESSION 1.4J (MF-19-3)
F. Obermeier, S. Heussner, M. Kaiser, AREVA GmbH, Erlangen, Bavaria, Ger- Monday, July 18, 4:00 pm – 5:45 pm, Perspectives Level (34th Floor), Grouse (N)
many; H. Hägeli, Axpo AG NPP Beznau, Döttingen, Switzerland; H. Schendzielorz, CREEP FAILURE ANALYSIS OF COMPONENTS
AREVA GmbH, Erlangen, Germany
Developed by: C. M. Davies, Imperial College London, London, United Kingdom;
PVP2016-63531: FURTHER POST TEST ANALYSIS AND COMPARISON OF
H. Qian, Alstom Power, Avon, CT, USA; R. Dennis, Frazer-Nash
STYLE MU-2 TEST RESULTS
Consultancy, Avon, United Kingdom
P. James, M. Ford, Amec Foster Wheeler, Warrington, United Kingdom
Chair: C. M. Davies, Imperial College London, London, United Kingdom
SESSION 1.4H (CS-11-1) Co-Chair: H. Qian, Alstom Power, Avon, CT, USA
Monday, July 18, 4:00 pm – 5:45 pm, Plaza Level (Second Floor), Georgia B PVP2016-63176: INNER PRESSURE/BENDING CREEP TEST ON CIRCUM-
EXTREME PRESSURE EQUIPMENT FERENTIALLY WELDED LARGE DIAMETER PIPE OF GRADE 91 STEEL:
Rudy Scavuzzo Memorial Symposium on Developments in International CREEP DAMAGE MECHANISM AND APPLICABILITY OF NDE
Codes and Standards—Sponsored by Codes & Standards Technical Com- S. Nishinoiri, Y. Takahashi, H. Fukutomi, M. Yaguchi, Central Research Institute
mittee of Electric Power Industry, Kanagawa-ken, Japan
Developed by: J. Zheng, J. Shi, Zhejiang University, Hangzhou, Zhejiang, China PVP2016-63582: A COMPUTATIONAL STUDY OF THE CREEP RESPONSE
Chair: J. Zheng, Zhejiang University, Hangzhou, China OF HIGH-TEMPERATURE LOW CHROME PIPING WITH PEAKED LONGITU-
Co-Chair: J. Shi, Zhejiang University, Hangzhou, Zhejiang, China DINAL WELD SEAMS
PVP2016-63839: FEASIBILITY DISCUSSION OF APPLICATION OF ASME- P. E. Prueter, J. D. Dobis, The Equity Engineering Group, Inc., Shaker Heights,
SAFETY CLASS 3 HDPE PIPING IN CHINA OH, USA; M. S. Geisenhoff, Flint Hills Resources, Rosemount, MN, USA; M. Ca-
W. Pan, Z. Li, M. Zhou, China Nuclear Power Design Co., Ltd. Shanghai, Shang- yard, Flint Hills Resources, Corpus Christi, TX, USA
hai, China PVP2016-63696: GRADE 11 HIGH TEMPERATURE STEAM HEADER CASE
PVP2016-63058: STUDY ON METALLOGRAPHY TEST OF THE STEEL HISTORY AND BENCHMARK
SPV490 FOR ATMOSPHERIC STORAGE TANK AFTER FIRE D. Dewees, Babcock & Wilcox, Barberton, OH, USA
Z. Fang, China Special Equipment Inspection and Research Institute, Beijing, PVP2016-63834: DEVELOPMENT OF ANALYTICAL EVALUATION METHODS
China; W. Hu, China University of Petroleum-Beijing, Beijing, China; D. Liu, G. Li, FOR CREEP FAILURE IN WELDMENTS OF HIGH CHROMIUM STEELS AND
China Special Equipment Inspection and Research Institute, Beijing, China; Z. APPLICATION TO FULL SCALE PIPE EXPERIMENTS
Wang, Beijing Institute of Architectural Design, Beijing, China Y. Takahashi, S. Nishinoiri, M. Yaguchi, Central Research Institute of Electric
PVP2016-63532: NUMERICAL INVESTIGATION OF NOZZLE ASPECT RATIO Power Industry, Kanagawa-Ken, Japan
EFFECTS ON HYDROGEN JET RELEASE CHARACTERISTICS SESSION 1.4K (HT-1-3)
H. Bie, Ocean University of China, Qingdao, China; Z. Hao, Shandong Academy Monday, July 18, 4:00 pm – 5:45 pm, Perspectives Level (34th Floor), Cypress
of Science, Qingdao, China; J. Ye, Huazhong University of Science and Technol- (W)
ogy, Wuhan, China DESIGN AND ANALYSIS OF HIGH PRESSURE MACHINERY AND OTHER
PVP2016-63960: CASE STUDY OF THE SURFACE CRACKING OF AUSTEN- EQUIPMENT
ITE STAINLESS STEEL WELD OVERLAY CLADDING IN HYDROGEN ENVI-
Developed by: E. Miller, Dupont, Orange, TX, USA
RONMENT
Chair: E. Miller, Dupont, Orange, TX, USA
X. Li, K. Ou, L. Wang, J. Zheng, W. Luo, Guangdong Institute of Special Equip-
Co-Chair: K. Simpson, Exxonmobil Chemical, Scotlandville, LA, USA
ment Inspection and Research, Foshan, China
PVP2016-63021: REDESIGN OF LDPE SECONDARY COMPRESSOR VALVES
TO BETTER TOLERATE POLYETHYLENE WAX FOULING
24