Scribd
Upload
277 views2 pages

Procedure For Assembly

This document outlines the procedure for assembly of plastic and rubber components. It details the responsibilities of assembly workers, the process which includes cleaning machines, taking materials from storage, assembling parts according to instruction sheets, and inspecting products. Workers must follow safety instructions such as keeping work areas clean and free of hazards, inspecting jobs, and using safety equipment. Quality checks are done during assembly and records are maintained.

Uploaded by

parshuram malvekar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
277 views2 pages

Procedure For Assembly

This document outlines the procedure for assembly of plastic and rubber components. It details the responsibilities of assembly workers, the process which includes cleaning machines, taking materials from storage, assembling parts according to instruction sheets, and inspecting products. Workers must follow safety instructions such as keeping work areas clean and free of hazards, inspecting jobs, and using safety equipment. Quality checks are done during assembly and records are maintained.

Uploaded by

parshuram malvekar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

SIDDHIVINAYAK INDUSTRIES

Doc.: Procedure for Assembly Doc. No. SVI/7.5.1/SOP-02 Page 1 of 2


Issue No: 00 Issue Date: 13.06.2019 Rev. No: 0 Rev. Date: --

PROCEDURE FOR ASSEMBLY

1. PURPOSE: To do the assembly of Parts as per the instruction sheet.

2. SCOPE: This procedure as applicable to the functions of Plastic & rubber component.

3. RESPONSIBILITY: It is the responsibility of the Plastic & rubber component assembly worker
to do work as per the instruction sheet.

4. REFEENCE: Instruction sheet, Supervisor

5. PROCEDURE:

5.1 Do Machine cleaning by using dry cloth.


5.2 Do oiling and greasing to the moving parts.
5.3 Take job card from the supervisor. (Inspection Report. SVI/8.5.1/F-01)
5.4 Take material from the store and check for its size.
a. Assemble the first piece as per instruction sheet.
b. Check fitment of Part assembly.
c. Check sample for the proper finish, like bur, damage etc.
5.5 Do inspection for the first piece as per the specifications.
5.6 If size is ok then start the further assembly process and record on the job card
5.7 Do in-process inspection and record 5no. after every 4Hrs per day on the Inspection report.
Ref- SPI/7.5.1/F-01
5.8 Check for the cut, damage, bend, dent & surface finish and size of the jobs. If Jobs is not up to
the mark then reject it and record accordingly.
5.9 After completion of job handover material to packing department with job card.
5.10 If any problem then contact supervisor.

REVIEWED BY : PRATIK TRIVADI APPROVED BY: PRASAD DALAL


SIDDHIVINAYAK INDUSTRIES
Doc.: Procedure for Assembly Doc. No. SVI/7.5.1/SOP-02 Page 2 of 2
Issue No: 00 Issue Date: 13.06.2019 Rev. No: 0 Rev. Date: --

PROCEDURE FOR ASSEMBLY

5.11 SAFETY INSTRUCTIONS

a. Ensure surrounding area is clean and free from dust and oil.

b. Refer Job specification for the job operation.

c. Job taken for the process must be properly inspected.

d. Remove wire connections or switch off the mains during any maintenance.

e. Do not put hand or any object in moving parts of machine.

f. Switch of the machine, if any abnormal sound appears

g. Always use safety equipments where ever necessary.

6.0 RECORD:

Sr. Document/ Record Name Doc./ Record No.


1. In-process Inspection Form SPI/8.5.1/F-01
2. In-process Inspection Record File SPI/8.5.1/R-01

REVIEWED BY : PRATIK TRIVADI APPROVED BY: PRASAD DALAL

You might also like